ItemNo Description Unit Rate2.1

2.1.1 All kinds of soil 100 sqm 3786.952.2

2.2.1 All kinds of soil 1 cum 287.402.2J EXCAVATION BY MANUAL MEANS 1 cum 285.102.3

2.3.1 All kinds of soil 1 cum 181.252.4 1 cum 2.65

2.5 Deduct for not watering the excavated earth for banking 1 cum 12.102.6

2.6.1 All kinds of soil 1 cum 129.352.72.7.1 Ordinary rock 1 cum 197.752.7.2 Hard rock (requiring blasting) 1 cum 347.802.7.3 Hard rock (blasting prohibited) 1 cum 490.102.82.8.1 All kinds of soil 1 cum 130.802.92.9.1 Ordinary rock 1 cum 212.002.9.2 Hard rock (requiring blasting) 1 cum 378.802.9.3 Hard rock (blasting prohibited) 1 cum 491.952.102.10.1 All kinds of soil2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia 1 metre 101.402.10.1.2 1 metre 165.602.10.1.3 1 metre 258.552.11 1 metre 135.002.12 1 metre 347.00

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed :

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m :

Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead up to 50 m and lift up to 1.5 m :

Deduct for not rolling with power roller of minimum 8 tonnes for banking excavated earth in layers not exceeding 20 cm in depth.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides,

Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm diaPipes, cables etc. exceeding 300 mm dia but not exceeding 600 mmExtra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m (Rate Extra for excavating trenches for pipes, cables, etc, in all kinds of soil for depth exceeding 3 m in depth, but not exceeding

ItemNo Description Unit Rate2.132.13.1 Ordinary rock2.13.1.1 Pipes, cables etc. not exceeding 80 mm dia 1 metre 142.952.13.1.2 1 metre 354.002.13.1.3 1 metre 407.302.13.2 Hard rock (requiring blasting)2.13.2.1 Pipes, cables etc. not exceeding 80 mm dia 1 metre 222.552.13.2.2 1 metre 551.102.13.2.3 1 metre 634.152.13.3 Hard rock (blasting prohibited)2.13.3.1 Pipes, cables etc. not exceeding 80 mm dia 1 metre 276.052.13.3.2 1 metre 683.502.13.3.3 1 metre 786.502.14 1 metre 105.002.15 1 metre 262.002.162.16.1 Depth not exceeding 1.5 m 1 sqm 101.852.16.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 106.202.16.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 115.952.172.17.1 Depth not exceeding 1.5 m 1 sqm 104.902.17.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 114.152.17.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 123.852.182.18.1 Depth not exceeding 1.5 m 1 sqm 90.252.18.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 95.302.18.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 100.752.19 1 sqm 1329.052.202.20.1 Depth not exceeding 1.5 m 1 sqm 52.502.20.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 55.252.20.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 59.652.212.21.1 Depth not exceeding 1.5 m 1 sqm 44.902.21.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 49.202.21.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 54.852.222.22.1 Depth not exceeding 1.5 m 1 sqm 30.602.22.2 Depth exceeding 1.5 m but not exceeding 3 m 1 sqm 33.652.22.3 Depth exceeding 3 m but not exceeding 4.5 m 1 sqm 38.402.23 1 sqm 683.852.24 Extra rates for quantities of works, executed:2.24.1 1 20.002.24.2 1 25.002.25 1 cum 83.802.262.26.1 All kinds of soil 1 cum 34.602.26.2 Ordinary or hard rock 1 cum 62.002.27 1 cum 749.302.282.28.1 All kinds of soil 100 sqm 935.252.292.29.1 All kinds of soil 100 sqm 939.952.302.30.1 All kinds of soil 1 each 41.60

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including

Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm diaPipes, cables exceeding 300 mm dia but not exceeding 600 mm dia

Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm diaPipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm dia

Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm diaPipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm diaExtra for excavating trenches for pipes, cables, etc. in ordinary / hard rock exceeding 1.5 m in depth but not exceeding 3 m Extra for excavating trenches for pipes, cables, etc. in ordinary / hard rock exceeding 3 m in depth but not exceeding 4.5 m Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete

Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities

Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete

Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be left permanently in Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area

Open timbering in case of shafts, wells, cesspits, manholes and the like including strutting and shoring complete

Open timbering over areas including strutting, shoring etc. complete (Measurements to be taken of the face area

Extra for planking and strutting in open timbering if required to be left permanently in position (Face area of the timber In or under water and/or liquid mud, including pumping out water as required

metre depthIn or under foul position, including pumping out water as

required metre depthFilling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20 cm Extra for every additional lift of 1.5 m or part there of in excavation / banking excavated or stacked materials.

Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same.Excavating holes more than 0.10 cum & upto 0.50 cum including getting out the excavated soil, then returning the

ItemNo Description Unit Rate2.30.2 Ordinary rock 1 each 65.952.30.3 Hard rock (requiring blasting) 1 each 116.002.30.4 Hard rock (blasting prohibited) 1 each 149.902.31 100 sqm 482.002.32 100 sqm 247.002.332.33.1 Beyond 30 cm girth up to and including 60 cm girth 1 each 148.202.33.2 Beyond 60 cm girth up to and including 120 cm girth 1 each 654.952.33.3 Beyond 120 cm girth up to and including 240 cm girth 1 each 3026.302.33.4 Above 240 cm girth 1 each 6071.302.342.34.1 Chlorpyriphos / Lindane emulsifiable concentrate of 20% 1 litre 185.952.352.35.12.35.1.1 With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration 1 metre 11.802.35.22.35.2.1 With Chlorpyriphosl Lindane E.C. 20% with 1% concentration 1 metre 17.702.35.32.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1 % concentration 1 sqm 88.252.35.42.35.4.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 1 metre 13.302.35.5 1 metre 127.752.36 Deduct for disposed soil not levelled and neatly dressed. 1 cum 25.352.37 1 cum 110.752.38 1 cum 83.802.393.1 Cement Mortar 1:1 (1 cement : 1 fine sand). 1 cum 5961.503.2 Cement mortar 1:2 (1 cement : 2 fine sand). 1 cum 4407.853.3 Cement mortar 1:3 (1 cement : 3 fine sand). 1 cum 3631.953.4 Cement mortar 1:4 (1 cement : 4 fine sand). 1 cum 2971.803.5 Cement mortar 1:5 (1 cement : 5 fine sand). 1 cum 2616.353.6 Cement mortar 1:6 (1 cement : 6 fine sand). 1 cum 2311.703.6J Cement mortar 1:6 (1 cement : 6 fine sand). 1 cum 2311.703.6K3.7 Cement mortar 1:2 (1 cement : 2 coarse sand). 1 cum 4863.853.8 Cement mortar 1:3 (1 cement : 3 coarse sand). 1 cum 4145.553.9 Cement mortar 1:4 (1 cement : 4 coarse sand). 1 cum 3485.403.10 Cement mortar 1:5 (1 cement : 5 coarse sand). 1 cum 3129.953.11 Cement mortar 1:6 (1 cement : 6 coarse sand). 1 cum 2825.303.12 Cement mortar 1:2 (1 cement : 2 stone dust). 1 cum 4678.603.13 Cement mortar 1:2 (1 cement : 2 marble dust). 1 cum 4749.853.14 Cement mortar 1:5 (1 cement : 5 marble dust). 1 cum 3001.553.15 White cement mortar 1:2 (1 white cement : 2 marble dust). 1 cum 9509.853.16 White cement mortar 1:3 (1 white cement : 3 marble dust). 1 cum 7587.153.17 White cement mortar 1:5 (1 white cement : 5 marble dust). 1 cum 5171.553.18 Mud mortar. 1 cum 301.103.19 1 cum 2004.203.204.14.1.1 1 cum 6143.554.1.2 1 cum 4904.954.1.3 1 cum 4514.054.1.4 1 cum 4404.054.1.5 1 cum 4024.004.1.6 1 cum 3888.20

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches,

Supplying chemical emulsion in sealed containers including delivery as specified.Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos / Lindane (in oil or kerosene based Supply and stacking of Fly ash conforming to IRC- 58 at site, including carriage, loading , unloading & stacking up to any Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not

Mortar in lime , surkhi ( 50% red and 50% light yellow) and marble dust 1:1.5:0.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

ItemNo Description Unit Rate4.1.7 1 cum 3626.154.1.8 1 cum 3593.304.1.9 1 cum 3331.254.1.10 1 cum 3357.404.1.11 1 cum 3087.454.1.12 1 cum 3477.654.1.13 1 cum 3199.654.24.2.1 1 cum 6901.904.2.2 1 cum 5663.304.2.3 1 cum 5272.404.2.4 1 cum 5162.404.2.5 1 cum 4782.354.2.6 1 cum 4646.554.2.7 1 cum 4384.504.2.8 1 cum 4112.054.34.3.1 Foundations, footings, bases for columns 1 sqm 166.904.3.2 1 sqm 285.154.3.3 Columns, piers, abutments, pillars, posts and struts 1 sqm 365.604.44.4.1 1 cum 4514.054.4.2 1 cum 4024.004.54.5.1 1 cum 5525.204.5.2 1 cum 5134.304.5.3 1 cum 4644.254.64.6.1 1 cum 4710.554.74.7.1 1 cum 7427.804.7.2 1 cum 6937.754.84.8.1 1 cum 5626.204.8.2 1 cum 5400.804.9 1 each 465.804.10 1 sqm 207.554.11 1 sqm 254.704.12 1 35.354.13 1 sqm 96.654.14 1 cum 430.354.15 1 325.104.16 Extra for laying concrete in or under foul positions. 1 cum 128.104.17 1 sqm 338.754.18 1 53.004.194.19.1 All works upto plinth level :4.19.1.1 1 cum 4969.954.19.1.2 1 cum 4847.754.19.2 All works above plinth and upto floor V level :4.19.2.1 1 cum 5358.304.19.2.2 1 cum 5236.104.204.20.1 All works upto plinth level :4.20.1.1 1 cum 5086.95

1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size)1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)1:4:8 (1 cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size)1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)1:2:3½:9 (1 ordinary portland cement : 2 Fly ash : 3½ coarse sand : 9 graded stone aggregate 40 mm nominal size).1:2½:4: 11 (1 ordinary portland cement : 2½ fly ash : 4 coarse sand : 11 graded stone aggregate 40 mm nominal size)Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)1:1½:3 (1 cement : 1½ coarse sand :3 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)1:3:6 (1 cement : 3 fine sand : 6 graded stone aggregate 40 mm nominal size)1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Providing and fixing up to floor five level precast cement concrete solid block, including hoisting and setting in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Providing and fixing up to floor five level precast cement concrete hollow block, including hoisting and setting in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape, including providing M.S. Pipe Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per

per 50kg cementApplying a coat of residual petroleum bitumen of grade of VG-

10 of approved quality using 1.7 kg per square metre on damp Extra for concrete work in superstructure above floor V level for each four floors or part thereof.Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing

cum per metre

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 Extra for addition of synthetic polyester triangular fibre of length 12 mm, effective diameter 10-40 microns and specific

per bag of 50kg of Providing and laying in position ready mixed plain cement

concrete, using fly ash and cement content as per approved M-15 grade plain cement concrete (cement content considered @ 240 kg/cum)M-10 grade plain cement concrete (cement content considered @ 220 kg/cum )M-15 grade plain cement concrete. (cement content considered @ 240 kg /cum)M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix M-15 grade plain cement concrete (cement content considered @ 240 kg/cum)

ItemNo Description Unit Rate4.20.1.2 1 cum 4964.754.20.2 All works above plinth and upto floor V level :4.20.2.1 1 cum 5475.304.20.2.2 1 cum 5353.105.15.1.1 1 cum 6333.405.1.2 1 cum 5094.855.1.3 1 cum 4703.905.25.2.1 1 cum 6974.305.2.2 1 cum 5735.755.2.3 1 cum 5344.805.3 1 cum 5494.555.4 1 cum 5181.255.5 1 cum 5684.555.6 1 cum 5419.405.7 1 cum 4537.005.8 1 cum 5442.005.95.9.1 1 sqm 166.905.9.2 1 sqm 285.155.9.3 1 sqm 311.205.9.4 Shelves (Cast in situ) 1 sqm 311.205.9.5 1 sqm 262.255.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 1 sqm 365.605.9.7 Stairs, (excluding landings) except spiral-staircases 1 sqm 326.305.9.8 Spiral staircases (including landing) 1 sqm 290.905.9.9 Arches, domes, vaults up to 6 m span 1 sqm 866.705.9.10 Extra for arches, domes, vaults exceeding 6 m span 1 sqm 417.855.9.11 Chimneys and shafts 1 sqm 285.155.9.12 Well steining 1 sqm 205.155.9.13 1 sqm 470.105.9.14 1 sqm 20.005.9.15 1 sqm 166.905.9.16 Edges of slabs and breaks in floors and walls5.9.16.1 Under 20 cm wide 1 metre 99.455.9.16.2 Above 20 cm wide 1 sqm 441.105.9.17 Cornices and mouldings 1 sqm 495.505.9.18 1 sqm 398.355.9.19 Weather shade, Chajjas, corbels etc., including edges 1 sqm 411.105.9.20 1 sqm 401.405.9.21 1 sqm 352.805.105.10.1 12 mm dia & 100 mm length 1 each set 125.955.10.2 12 mm dia & 150 mm length 1 each set 139.855.10.3 20 mm dia & 150 mm length 1 each set 153.805.10.4 20 mm dia & 225 mm length 1 each set 174.705.115.11.1 1 sqm 121.655.12 1 cum 5262.155.13 1 cum 7245.555.14 1 cum 8055.655.15 1 cum 6754.005.16 1 cum 9872.855.17 1 cum 5897.50

M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)M-15 grade plain cement concrete (cement content considered @ 240 kg /cum)M-10 grade plain cement concrete (cement content considered @ 220 kg/cum)Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like excluding the cost of Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than Reinforced cement concrete work in chimneys, shafts, up to floor five level excluding the cost of centering, shuttering, Reinforced cement concrete work in well-steining excluding the cost of centering, shuttering, finishing and reinforcement, Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concreteWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.Suspended floors, roofs, landings, balconies and access platformLintels, beams, plinth beams, girders, bressumers and cantilevers

Vertical and horizontal fins individually or forming box louvers band, facias and eaves boardsExtra for shuttering in circular work (20% of respective centering and shuttering items)Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed

Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the likeSuspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thickLintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thickProviding and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in mouldings as in cornices, Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in lintels, beams and bressumers Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in vertical & horizontal fins

ItemNo Description Unit Rate5.185.18.1 50 mm thick 1 sqm 598.155.18.2 40 mm thick 1 sqm 523.805.18.3 25 mm thick 1 sqm 483.155.19 1 cum 7259.655.20 1 cum 4941.605.21 1 sqm 349.905.225.22.1 Mild steel and Medium Tensile steel bars 1 kilogram 56.755.22.2 Hard drawn steel wire 1 kilogram 58.155.22.3 Cold twisted bars 1 kilogram 62.255.22.4 Hot rolled deformed bars 1 kilogram 62.255.22.5 Hard drawn steel wire fabric 1 kilogram 73.405.22.6 Thermo-Mechanically Treated bars 1 kilogram 62.255.22A5.22A.1 Mild steel and Medium Tensile steel bars 1 kilogram 56.755.22A.2 Hard drawn steel wire 1 kilogram 58.155.22A.3 Cold twisted bars 1 kilogram 62.255.22A.4 Hot rolled deformed bars 1 kilogram 62.255.22A.5 Hard drawn steel wire fabric 1 kilogram 73.405.22A.6 Thermo-Mechanically Treated bars 1 kilogram 62.255.23 1 sqm 101.005.24 1 sqm 70.855.25 1 kilogram 322.155.26 1 522.655.27 1 167.355.28 1 430.305.295.29.1 Non-asbestos fibre cement board 6mm thick as per IS : 148625.29.1.1 150 mm wide 1 metre 96.805.29.1.2 200 mm wide 1 metre 130.005.29.2 Aluminium fluted strips 3.15 mm thick5.29.2.1 150 mm wide 1 metre 312.355.29.2.2 200 mm wide 1 metre 437.305.30 1 metre 22.255.31 1 cum 325.105.32 1 cum 128.105.335.33.1 All work upto plinth level 1 cum 5242.155.33.2 All work above plinth level upto floor V level 1 cum 5781.505.345.34.1 1 cum 63.205.34.2 1 cum 126.455.34.3 1 cum 186.905.35 1 quintal 589.805.36 1 cum 14097.205.375.37.1 All work upto plinth level 1 cum 5590.605.37.2 All work above plinth level upto floor V level 1 cum 6129.955.38 1 cum 151.005.405.40.1 All works up to Plinth level 1 cum 5519.855.40.2 All works above plinth & up to floor V level 1 cum 6059.205.415.41.1 Non pigmented wet curing compound 1 sqm 84.20

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

Encasing rolled steel sections, in beams and columns, with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded Encasing rolled steel section in grillages with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement : 3 fine sand).Extra for rendering smooth the top of suspended floors, landings and staircases (treads and risers) with cement mortar Providing and fixing in position copper plate as per design for expansion joints.Providing and filling in position, blown bitumen in expansion joints.

per cm depth per Providing and filling in position bitumen mix filler of

Proportion 80 kg of hot bitumen, 1 kg of cement and 0.25 per cm depth per Providing and fixing in position 12 mm thick bitumen

impregnated fibre board conforming to IS: 1838, including per cm depth per Providing and fixing sheet covering over expansion joints with

iron screws as per design.

Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections.Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out Extra for laying reinforced cement concrete in or under foul positions.Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for

Extra for providing richer mixes at all floor levels. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ Providing M-35 grade concrete instead of M-25 grade BMC/RMC. (Note : Cement content considered in M-35 is @ Providing M-40 grade concrete instead of M-25 grade BMC/RMC.(Note : Cement content considered in M-40 is @ Add for using extra cement in the items of design mix over and above the specified cement content therein.Providing and placing in position precast reinforced cement concrete waffle units, square or rectangular as per design and Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement

Extra for R.C.C. / B.M.C / R.M.C. work above floor V level for each four floors or part thereof. Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash

Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all

ItemNo Description Unit Rate5.41.2 Pigmented wet curing compound 1 sqm 98.155.425.42.1 Coupler for 16 mm diameter reinforcement bar 1 each 115.705.42.2 Coupler for 20 mm diameter reinforcement bar 1 each 155.705.42.3 Coupler for 25 mm diameter reinforcement bar 1 each 216.705.42.4 Coupler for 28 mm diameter reinforcement bar 1 each 300.705.42.5 Coupler for 32 mm diameter reinforcement bar 1 each 350.905.435.43.1 200 mm wide 1 metre 559.855.43.2 300 mm wide 1 metre 815.406.16.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 3508.256.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3316.556.26.2.1 Cement mortar 1:4(1 cement : 4 coarse sand) 1 cum 3370.556.2.2 Cement Mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3201.906.36.3.1 With F.P.S. (non modular) bricks 1 cum 4593.406.3.2 With Modular bricks 1 cum 4118.806.46.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 4067.856.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3876.156.5 1 cum 250.456.6 1 sqm 80.606.7 1 metre 135.056.8 1 sqm 372.006.9 1 cum 6384.106.10 1 cum 7555.356.11 1 sqm 417.856.126.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand) 1 sqm 438.406.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 sqm 416.956.136.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) 1 sqm 498.356.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 1 sqm 476.856.14 1 sqm 22.206.15 1 sqm 63.306.166.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 5520.306.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 5213.606.17 1 cum 5755.106.18 1 cum 5804.206.19 Deleted.6.20 1 cum 8165.456.21 1 cum 9299.706.22 1 sqm 379.106.23 1 sqm 316.456.24 1 325.106.25 Extra for laying brick work in or under foul position. 1 cum 128.106.266.26.1 From ground level upto plinth level 1 cum 3390.906.26.2 Above plinth level and upto floor V level 1 cum 3979.206.276.27.1 From ground level upto plinth level 1 cum 3225.506.27.2 Above plinth level and upto floor V level 1 cum 3785.10

Providing and fixing tapered / parallel threaded couplers conforming to IS code on "Reinforcement Couplers for

Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per design for expansion joints.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in :

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth

Extra for brick work/ AAC block masonry/ Tile brick masonry in super structure above floor V level, for each four floors or part Extra for forming cavity 5 cm to 7.5 cm wide in cavity walls with necessary weep and vent holes including use of cores Providing half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering Brick work in gauged arches in superstructure above plinth level and upto floor five level in cement mortar 1:3 (1 Extra for additional cost of centering for arches exceeding 6m span including all shuttering, bolting, wedging and removal Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure

Extra for half brick masonry in superstructure, above floor V level for every four floors or part thereof by mechanical Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.Tile brick masonry with common burnt clay tile bricks of class designation 10 in foundation and plinth in :

Tile brick masonry with common burnt clay machine moulded tile bricks of class designation 12.5 conforming to IS : 2690 Tile brick masonry with common burnt clay tile bricks of class designation 10 in superstructure above plinth level up to floor Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in plain arch work Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in gauged arch Tile brick masonry work 5 cm thick with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in Honey-comb brick work 10/11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and

cum/mtr depth

Brick work with common burnt clay selected F.P.S (non modular) bricks of class designation 7.5 in exposed brick work

Brick work with common burnt clay modular bricks of class designation 7.5 in exposed brick work including making

ItemNo Description Unit Rate6.286.28.1 From ground level upto plinth level 1 cum 3480.056.28.2 Above plinth level and upto floor V level 1 cum 4039.656.296.29.1 From ground level upto plinth level 1 cum 3713.156.29.2 Above plinth level and upto floor V level 1 cum 4252.756.306.30.1 From ground level upto plinth level 1 cum 4057.406.30.2 Above plinth level and upto floor V level 1 cum 4617.006.316.31.1 From ground level upto plinth level 1 cum 3593.156.31.2 Above plinth level and upto floor V level 1 cum 4152.756.326.32.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 4102.056.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3910.356.346.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 4147.206.34.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3978.506.356.35.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 1 cum 4316.856.35.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 4148.206.366.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) 1 cum 3794.806.37 1 cum 6221.656.38 1 cum 4508.306.40 1 sqm 730.906.41 1 sqm 49.656.426.42.1 Cement mortar 1:4 (1 cement :4 coarse sand) 1 cum 4871.156.42.2 Cement mortar 1:6 (1 cement :6 coarse sand) 1 cum 4679.456.44 1 metre 26.056.456.45.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) 1 sqm 524.606.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) 1 sqm 503.106.466.46.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) 1 sqm 590.206.46.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) 1 sqm 568.757.17.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3059.207.27.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3615.357.4 Extra for random rubble masonry with hard stone in :7.4.1 Square or rectangular pillars 1 cum 261.357.4.2 Circular pillars 1 cum 812.757.5 1 cum 328.057.67.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3468.807.77.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) 1 cum 3255.257.87.8.1 1 cum 4017.707.8.2 1 cum 3804.157.107.10.1 Square or rectangular pillars 1 cum 289.907.10.2 Circular pillars 1 cum 919.15

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work

Brick work with common burnt clay machine moulded F.P.S. (non modular) bricks of class designation 12.5 in exposed

Brick work with common burnt clay machine moulded perforated F.P.S. (non modular) bricks of class designation

Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5

Brick work with clay flyash F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

Brick work with non modular fly ash lime bricks (FALG Bricks) conforming to IS:12894, class designation 10 average

Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average

Brick work with modular extruded brunt fly ash clay sewer bricks (Conforming to IS: 4885 ) in foundation and plinth :Brick work with modular extruded brunt fly ash clay sewer bricks (conforming to IS : 4885) in arches in foundation and Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, Extra for Gypsum panel partitions in superstructure above floor V level for every four floors or part thereof.Brick work with mechanized autoclaved flyash sand lime non modular bricks conforming to IS: 12894 of class designation 10

Brick edging 7 cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of class designation 10, conforming to IS :

Half brick masonry with non modular mechanised auto claved fly ash sand lime bricks of class designation 10, conforming to

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling

Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m.Coursed rubble masonry (first sort) with hard stone in foundation and plinth with :Coursed rubble masonry (second sort) with hard stone in foundation & plinth with :Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level.Masonry work (first sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand)Masonry work (second sort), in cement mortar 1:6 ( 1 cement : 6 coarse sand)Extra for coursed rubble masonry with hard stone (first or second sort) in :

ItemNo Description Unit Rate7.11 1 cum 356.107.127.12.1 One face dressed7.12.1.1 Red sand stone 1 cum 22285.007.12.1.2 White sand stone 1 cum 23060.007.12.2 Both faces dressed7.12.2.1 Red sand stone 1 cum 28507.007.12.2.2 White sand stone 1 cum 29282.007.137.13.1 One face dressed7.13.1.1 Red sand stone 1 cum 26019.007.13.1.2 White sand stone 1 cum 26794.007.13.2 Both faces dressed7.13.2.1 Red sand stone 1 cum 32243.007.13.2.2 White sand stone 1 cum 33017.007.147.14.1 One face dressed7.14.1.1 Red sand stone 1 cum 38361.007.14.1.2 White sand stone 1 cum 39136.007.14.2 Both faces dressed7.14.2.1 Red sand stone 1 cum 53527.007.14.2.2 White sand stone 1 cum 54302.007.157.15.1 One face punched7.15.1.1 Red sand stone 1 cum 21366.007.15.1.2 White sand stone 1 cum 22141.007.15.2 Both faced punched7.15.2.1 Red sand stone 1 cum 26668.007.15.2.2 White sand stone 1 cum 27442.007.16 1 cum 574.007.17 Extra for plain ashlar or ashlar punched in :7.17.1 Square or rectangular pillars 1 cum 1552.007.18 1 cum 1080.007.19 1 sqm 417.857.207.20.1 Red sand stone 1 cum 30116.007.20.2 White sand stone 1 cum 30891.007.217.21.1 Triangular or Square or rectangular pillars 1 cum 2024.007.21.2 Circular or polygonal pillars 1 cum 5736.007.22 Extra for stone work ashlar sunk or moulded in cornices. 1 16.607.237.23.17.23.1.1 70 mm thick 1 sqm 2015.557.23.1.2 60 mm thick 1 sqm 1919.857.23.1.3 50 mm thick 1 sqm 1824.357.23.1.4 40 mm thick 1 sqm 1728.457.23.1.5 30 mm thick 1 sqm 1632.707.23.27.23.2.1 70 mm thick 1 sqm 2618.857.23.2.2 60 mm thick 1 sqm 2523.157.23.2.3 50 mm thick 1 sqm 2427.657.23.2.4 40 mm thick 1 sqm 2331.757.23.2.5 30 mm thick 1 sqm 2236.007.23.3

Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand)

Stone work plain ashlar in arches in superstructure upto floor V level in cement morter 1 : 3 (1 cement : 3 coarse sand)

Stone work plain ashlar in domes, in super structure upto floor V level in cement mortar 1:3 (1 cement : 3 coarse sand)

Stone work ashlar punched (ordinary) in superstructure upto floor five level in cement mortar 1:6 (1 white cement : 6

Extra for stone work, Random Rubble/Coursed Rubble masonry/Ashlar Masonry above floor V level for every four

Extra for stone work; plain ashlar or ashlar punched curved on plan with a mean radius not exceeding 6 m. Extra for additional cost of centering for arches exceeding 6 m span including all strutting, bolting, wedging etc. and removal Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse

Extra for stone work ashalr sunk or moulded or sunk and moulded or carved in :

per metre per cm Stone work (machine cut edges) for wall lining etc.(veneer

work) upto 10 metre height, backing filled with a grout of Red sand stone - Exposed face fine dressed with rough backing.

Red sand stone - Exposed face machine cut and table rubbed ·with rough backing.

White sand stone - Exposed face fine dressed with rough backing.

ItemNo Description Unit Rate7.23.3.1 70 mm thick 1 sqm 2069.757.23.3.2 60 mm thick 1 sqm 1966.307.23.3.3 50 mm thick 1 sqm 1863.107.23.3.4 40 mm thick 1 sqm 1759.207.23.3.5 30 mm thick 1 sqm 1655.907.23.47.23.4.1 70 mm thick 1 sqm 2673.057.23.4.2 60 mm thick 1 sqm 2569.607.23.4.3 50 mm thick 1 sqm 2466.407.23.4.4 40 mm thick. 1 sqm 2362.507.23.4.5 30 mm thick 1 sqm 2259.207.24 1 cum 1552.007.25 1 kilogram 524.107.26 1 each 30.607.27 1 each 27.407.287.28.1 Red sand stone:7.28.1.1 1 sqm 1011.557.28.2 White sand stone:7.28.2.1 1 sqm 1035.507.297.29.1 Red sand stone 1 sqm 619.707.29.2 White sand stone 1 sqm 640.607.30 1 sqm 652.657.31 1 each 2218.657.327.32.1 Red sand stone 1 cum 29914.007.32.2 White sand stone 1 cum 30690.007.337.33.1 Red sand stone 1 sqm 6798.157.33.2 White sand stone 1 sqm 6817.307.34 1 325.107.35 Extra for laying stone work in or under foul position. 1 cum 128.107.36 1 sqm 1195.157.377.37.1 Kota stone slabs exposed face dressed and rubbed.7.37.1.1 25 mm thick 1 sqm 1177.557.387.38.1 8 mm thick (mirror polished and machine cut edge)7.38.1.1 Granite stone of any colour and shade 1 sqm 1466.357.38.1.2 1 sqm 1234.207.39 1 sqm 65.857.407.40.1 Red sand stone 1 sqm 1989.407.40.2 White sand stone 1 sqm 2048.357.41 1 kilogram 119.007.42 1 each 171.208.18.1.18.1.1.1 Area of slab upto 0.50 sqm 1 sqm 2222.908.1.1.2 Area of slab over 0.50 sqm 1 sqm 2314.108.28.2.18.2.1.1 Area of slab upto 0.50 sqm 1 sqm 1894.758.2.1.2 Area of slab over 0.50 sqm 1 sqm 1980.10

White sand stone - Exposed face machine cut and table rubbed with rough backing.

Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m.Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or Providing and fixing stone dowels 10x5x2.50 cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 Providing and fixing copper pins 7.5 cm long 6mm diameter for securing adjacent stones in stone wall lining in cement Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope With common burnt clay F.P.S.(non modular) bricks of class designation 7.5With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4

30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in cement mortar 1:6 (1

Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including

Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and

cum/mtr depth

Wall lining butch work upto 10 m height with Dholpur stone 40 mm thick rough facing on the exposed surface with stone Stone work ( machine cut edges veneer work) for wall lining upto 10 m height, backing filled with a grout of 12 mm thick

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1

Raj Nagar plain white marble / Udaipur green marble / Zebra black marbleExtra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of

Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble

ItemNo Description Unit Rate8.2.2 Granite of any colour and shade8.2.2.1 Area of slab upto 0.50 sqm 1 sqm 3041.158.2.2.2 Area of slab over 0.50 sqm 1 sqm 3083.408.38.3.1 Marble work 1 metre 105.708.3.2 Granite work 1 metre 178.758.4 1 metre 185.808.5 1 each 281.108.6 1 sqm 163.108.78.7.1 Gunmetal cramps 1 kg 492.708.7.2 Stainless steel cramps 1 kg 524.108.88.8.1 Wedge expansion type8.8.1.1 Fastener with threaded dia 6 mm 1 each 22.058.8.1.2 Fastener with threaded dia 10 mm 1 each 24.708.8.1.3 Fastener with threaded dia 12 mm 1 each 38.958.98.9.1 8 mm thick8.9.1.1 1 sqm 1207.908.9.1.2 Granite of any colour and shade 1 sqm 1606.708.108.10.1 White Agaria Marble Stone 1 sqm 2670.258.10.2 Granite Stone of approved shade 1 sqm 2942.059.19.1.1 Second class teak wood 1 cum 85813.309.1.2 Sal wood 1 cum 68648.909.1.3 Kiln seasoned and chemically treated Hollock wood 1 cum 46619.459.2 1 cum 86951.109.39.3.1 Sal wood 1 cum 65549.909.3.2 Kiln seasoned and chemically treated hollock wood 1 cum 43393.209.49.4.1 Second class teak wood 1 cum 8581.109.4.2 Sal wood 1 cum 6865.009.4.3 Kiln seasoned and chemically treated hollock wood 1 cum 4661.659.59.5.1 Second class teak wood 9.5.1.1 35 mm thick shutters 1 sqm 2434.059.5.1.2 30 mm thick shutters 1 sqm 2162.659.5.2 Kiln seasoned and chemically treated hollock wood9.5.2.1 35 mm thick shutters 1 sqm 1445.309.5.2.2 30 mm thick shutters 1 sqm 1310.609.5.3 Kiln seasoned selected planks of sheesham wood9.5.3.1 35 mm thick shutters 1 sqm 2260.709.5.3.2 30 mm thick shutters 1 sqm 2000.759.69.6.1 1 sqm 2300.759.6.2 1 sqm 2475.009.6.3 1 sqm 2382.109.79.7.1 Second class teak wood 1 sqm 1950.359.7.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1149.359.7.3 Ply wood 5 ply, 9 mm thick 9.7.3.1 1 sqm 1669.85

Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to

Extra for fixing marble / granite stone, over and above corresponding basic item, in facia and drops of width upto Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and Mirror polishing on marble work/ granite work/ stone work where ever required to give high gloss finish complete.Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement Raj nagar plain white marble / Udaipur green marble / Zebra black marbleProviding and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in

Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001( Part B) in factory made frames of doors, Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :

Extra for additional labour for circular works, such as in frames of fan light:

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and 12 mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows

Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type.

ItemNo Description Unit Rate9.7.3.2 1 sqm 1409.409.7.4 Ply wood 7 ply, 9 mm thick9.7.4.1 1 sqm 1507.959.7.5 Particle Board 12 mm thick9.7.5.1 1 sqm 775.859.7.5.2 1 sqm 994.109.7.5.3 1 sqm 1289.759.7.5.4 1 sqm 1332.009.7.6 Coir Veneer Board (conforming to IS 14842 )9.7.6.1 12 mm thick 1 sqm 1194.009.7.7 Float glass panes9.7.7.1 4 mm thick glass pane 1 sqm 933.159.7.7.2 5.5 mm thick glass pane 1 sqm 1113.409.7.8 1 sqm 1360.209.8 Deleted.9.99.9.1 Second class teak wood9.9.1.1 35 mm thick 1 sqm 2955.909.9.1.2 30 mm thick 1 sqm 2645.709.9.2 Kiln seasoned and chemically treated hollock wood9.9.2.1 35 mm thick 1 sqm 1830.409.9.2.2 30 mm thick 1 sqm 1676.509.9.3 Kiln seasoned selected planks of sheesham wood9.9.3.1 35 mm thick 1 sqm 2758.759.9.3.2 30 mm thick 1 sqm 2475.809.109.10.1 30 mm thick shutters 1 sqm 2068.459.119.11.1 5.5 mm thick instead of 4 mm thick 1 sqm 162.609.12 1 sqm 5.809.13 1 sqm 63.909.14 1 sqm 97.459.159.15.1 Stainless steel butt hinges with stainless steel screws9.15.1.1 For 2nd class teak wood and other class of wood shutters 1 sqm 142.059.15.29.15.2.1 For 2nd class teak wood and other class of wood shutters 1 sqm 44.659.16 Providing and fixing 25 mm thick shutters for cup board etc. :9.16.1 Panelled or panelled & glazed shutters : 9.16.1.1 1 sqm 2440.259.16.1.2 1 sqm 2457.159.16.2 Glazed shutters:9.16.2.1 1 sqm 2463.259.16.2.2 1 sqm 2423.359.179.17.1 12 mm thick 1 sqm 488.109.17.2 18 mm thick 1 sqm 568.959.189.18.1 18 mm thick 1 sqm 1099.809.18.2 25 mm thick 1 sqm 1187.809.209.20.1 1 sqm 2159.059.20.2 1 sqm 1984.809.20.3 1 sqm 1789.459.21

Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 markedVeneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS :12823 marked

Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beadingProviding and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes

Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and Deduct for providing pin headed glass panes instead of ordinary float glass panes weighing 4 mm thick in doors, Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required Deduct for not providing hinges in doors,windows and clerestory window shutters with:

ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws

Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screwsSecond class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsSecond class teak wood including ISI marked anodised aluminium butt hinges with necessary screwsSecond class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsProviding and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board

ItemNo Description Unit Rate9.21.1 1 sqm 1578.309.21.2 1 sqm 1404.059.21.3 1 sqm 1266.759.229.22.1 On one side only 1 sqm 371.709.23 1 sqm 325.209.249.24.1 Rectangular or square 1 sqm 127.759.24.2 Circular 1 sqm 197.459.259.25.1 Decorative type door 1 sqm 336.859.26 1 sqm 92.909.279.27.1 35 mm thick shutters9.27.1.19.27.1.1.1 Second class teak wood 1 sqm 2737.909.27.1.1.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1741.209.27.1.1.3 Kiln seasoned selected class of sheesham wood 1 sqm 2563.209.27.1.2 With ISI marked stainless steel butt hinges of required size9.27.1.2.1 Second class teak wood 1 sqm 2835.359.27.1.2.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1838.659.27.1.2.3 Kiln seasoned selected class of sheesham wood 1 sqm 2660.659.27.2 30 mm thick shutters9.27.2.19.27.2.1.1 Second class teak wood 1 sqm 2412.659.27.2.1.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1560.609.27.2.1.3 Kiln seasoned selected class of sheesham wood 1 sqm 2263.159.27.2.2 With ISI marked stainless steel butt hinges of required size9.27.2.2.1 Second class teak wood 1 sqm 2510.109.27.2.2.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1657.959.27.2.2.3 Kiln seasoned selected class of sheesham wood 1 sqm 2360.609.28 Deleted.9.29 Deleted.9.30 Deleted.9.319.31.1 35 mm thick shutters 1 sqm 2126.559.31.2 30 mm thick shutters 1 sqm 1842.009.32 1 each 17.409.339.33.1 25 mm long 1 each 12.909.33.2 32 mm long 1 each 14.959.33.3 40 mm long 1 each 18.459.33.4 50 mm long 1 each 20.759.349.34.1 40 mm thick 1 sqm 4525.009.34.2 25 mm thick 1 sqm 2922.809.34.3 20 mm thick 1 sqm 2361.209.34.4 12 mm thick 1 sqm 1506.709.359.35.1 12 mm thick 1 sqm 1059.909.35.2 18 mm thick 1 sqm 1213.259.35.3 25 mm thick 1 sqm 1302.659.369.36.1 Kiln seasoned and chemically treated hollock wood 1 cum 84413.109.37

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screwsExtra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of

Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average With ISI marked M.S. pressed butt hinges bright finished of required size

With ISI marked M.S. pressed butt hinges bright finished of required size

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001

Providing 50x50x50 mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws

Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with

Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-

Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining /

ItemNo Description Unit Rate9.37.1 Decorative veneer facings of approved manufacture 1 sqm 975.159.38 1 sqm 796.709.399.39.1 18 mm thick 1 sqm 1395.409.39.2 25 mm thick 1 sqm 1484.809.409.40.1 2nd class teak wood 9.40.1.1 50x12 mm 1 metre 98.409.40.1.2 50 x 20 mm 1 metre 135.709.40.2 Kiln seasoned and chemically treated hollock wood9.40.2.1 50x12 mm 1 metre 70.059.40.2.2 50x20 mm 1 metre 88.409.419.41.1 Second class teak wood 1 sqm 1589.109.42 1 metre 298.459.43 1 metre 406.759.449.44.1 Non decorative veneer on both sides 1 metre 28.809.44.2 Particle board with decorative veneering on both sides 1 metre 84.559.45 1 metre 38.359.469.46.1 12 mm dia 1 metre 243.159.46.2 20 mm dia 1 metre 324.459.46.3 25 mm dia 1 metre 417.359.479.47.1 20 mm dia (heavy type) 1 metre 107.109.47.2 25 mm dia (heavy type) 1 metre 117.559.489.48.1 Fixed to steel windows by welding 1 kg 90.759.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc 1 kg 98.209.49 1 sqm 837.959.50 1 sqm 1033.859.519.51.1 With 2nd class teak wood beading 62X19 mm 1 sqm 758.209.51.2 With 12 mm mild steel U beading 1 sqm 484.759.52 1 sqm 139.409.53 1 each 97.809.549.54.1 Sal wood 1 cum 63829.709.54.2 Hollock wood 1 cum 41315.409.559.55.1 125x65x2.12 mm 1 each 28.159.55.2 100x58x1.90 mm 1 each 21.459.55.3 75x47x1.70 mm 1 each 17.109.55.4 50x37x1.50 mm 1 each 9.109.569.56.1 125x90x4.00 mm 1 each 50.259.56.2 100x75x3.50 mm 1 each 30.709.56.3 75x60x3.10 mm 1 each 19.759.56.4 50x40x2.50 mm 1 each 12.009.579.57.1 125x65x2.12 mm 1 each 29.259.57.2 100x58x1.90 mm 1 each 21.459.57.3 75x47x1.70 mm 1 each 16.859.57.4 50x37x1.50 mm 1 each 9.30

Providing and fixing 4 mm thick coir veneer board, ISI marked IS : 14842, plain lining with necessary screws, priming coat on Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on

Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 Extra for using veneered particle board conforming to IS: 3097 Grade I, in item of pelmet 18 mm thick 150 mm wide.

Providing and fixing teak wood lipping of size 25x3 mm in pelmet.Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets:

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc.

Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with

Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 kg per sqm in panelled and glazed Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete:

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete :

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.

ItemNo Description Unit Rate9.589.58.1 150x125x27x2.80 mm 1 each 50.759.58.2 125x125x27x2.80 mm 1 each 48.409.58.3 100x125x27x2.80 mm 1 each 39.709.58.4 75x100x20x2.24 mm 1 each 34.159.599.59.1 150 mm 1 each 147.359.59.2 125 mm 1 each 141.559.59.3 100 mm 1 each 116.459.609.60.1 150 mm 1 each 153.159.60.2 125 mm 1 each 147.359.60.3 100 mm 1 each 122.259.619.61.1 Overall width 35 mm 1 metre 130.259.61.2 Overall width 50 mm 1 metre 129.109.61.3 Overall width 65 mm 1 metre 140.759.629.62.1 300x16 mm 1 each 142.359.62.2 250x16 mm 1 each 129.859.639.63.1 250x10 mm 1 each 55.509.63.2 200x10 mm 1 each 48.509.63.3 150x10 mm 1 each 35.809.63.4 100x10 mm 1 each 29.409.64 1 each 60.159.659.65.1 300x20x6 mm 1 each 60.359.65.2 250x20x6 mm 1 each 54.559.669.66.1 125 mm 1 each 23.759.66.2 100 mm 1 each 21.259.66.3 75 mm 1 each 20.109.679.67.1 150 mm 1 each 20.059.67.2 115 mm 1 each 17.309.67.3 90 mm 1 each 14.409.689.68.1 300 mm weighing not less than 200 gms 1 each 29.809.68.2 250 mm weighing not less than 150 gms 1 each 25.859.68.3 200 mm weighing not less than 120 gms 1 each 24.709.69 1 each 75.459.709.70.1 125x64x1.90 mm 1 each 57.659.70.2 100X58X1.90 mm 1 each 50.609.70.3 75x47x1.80 mm 1 each 34.309.70.4 50x37x1.50 mm 1 each 21.659.719.71.1 125x64x2.50 mm 1 each 66.959.71.2 100x60x2.50 mm 1 each 52.359.71.3 75x50x2.50 mm 1 each 40.109.729.72.1 125x85x5.5 mm (heavy type) 1 each 368.459.72.2 125x70x4 mm (ordinary type) 1 each 124.559.72.3 100x85x5.5 mm (heavy type) 1 each 325.10

Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete:

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete:

Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:

Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, Providing and fixing ISI marked oxidised MS door latches conforming to IS : 5930 with screws etc. complete.

Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete:

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc.

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.

Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, ( weighting not less than 450 gms).Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:

ItemNo Description Unit Rate9.72.4 100x70x4 mm (ordinary type) 1 each 98.609.72.5 75x65x4 mm (heavy type) 1 each 121.859.72.6 75x40x2.5 mm (ordinary type) 1 each 63.759.72.7 50x40x2.5 mm (ordinary type) 1 each 27.159.739.73.1 150x125x27x5 mm 1 each 326.259.73.2 125x125x27x5 mm 1 each 291.409.73.3 100x125x27x5 mm 1 each 256.559.73.4 75x100x20x3.2 mm 1 each 204.309.749.74.1 250x10 mm 1 each 280.709.74.2 200x10 mm 1 each 219.309.74.3 150x10 mm 1 each 178.659.74.4 100x10 mm 1 each 117.559.759.75.1 300x16x5 mm 1 each 200.609.75.2 250x16x5 mm 1 each 189.009.76 1 each 472.259.77 1 each 414.209.78 1 each 588.409.799.79.1 40 mm 1 each 141.259.79.2 50 mm 1 each 147.059.79.3 65 mm 1 each 152.859.79.4 75 mm 1 each 176.109.80 1 each 40.209.819.81.1 125 mm 1 each 169.609.81.2 100 mm 1 each 151.859.81.3 75 mm 1 each 117.009.82 1 each 73.409.83 1 each 662.809.84 1 each 981.759.85 1 each 60.359.869.86.1 300 mm weighing not less than 330 gms 1 each 149.059.86.2 250 mm weighing not less than 280 gms 1 each 124.209.86.3 200 mm weighing not less than 240 gms 1 each 112.609.879.87.1 150 mm 1 each 93.259.87.2 115 mm 1 each 79.309.87.3 90 mm 1 each 67.709.88 1 each 646.509.89 1 each 646.509.909.90.1 Size 40 mm 1 each 137.759.90.2 Size 50 mm 1 each 147.059.90.3 Size 65 mm 1 each 161.009.90.4 Size 75 mm 1 each 185.359.91 1 each 57.659.929.92.1 125 mm 1 each 192.809.92.2 100 mm 1 each 169.309.92.3 75 mm 1 each 146.059.93 1 each 113.55

Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete:

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:

Providing and fixing bright finished brass door latch with necessary screws etc. complete:

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with Providing and fixing bright finished brass· casement window fastener with necessary screws etc. complete. Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete:

Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete:

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete.

ItemNo Description Unit Rate9.949.94.1 300 mm weighing not less than 330 gms 1 each 171.609.94.2 250 mm weighing not less than 280 gms 1 each 148.409.94.3 200 mm weighing not less than 240 gms 1 each 125.159.959.95.1 125x75x4 mm 1 each 98.709.95.2 125x63x4 mm 1 each 94.059.95.3 100x75x4 mm 1 each 83.709.95.4 100x63x4 mm 1 each 82.509.95.5 100x63x3.2 mm 1 each 81.359.95.6 75x63x4 mm 1 each 73.409.95.7 75x63x3.2 mm 1 each 70.509.95.8 75x45x3.2 mm 1 each 63.559.969.96.1 300x16 mm 1 each 203.809.96.2 250x16 mm 1 each 168.959.979.97.1 300x10 mm 1 each 100.409.97.2 250x10 mm 1 each 86.459.97.3 200x10 mm 1 each 71.059.97.4 150x10 mm 1 each 59.009.97.5 100x10 mm 1 each 46.259.98 1 each 62.459.99 1 each 155.359.1009.100.1 125 mm 1 each 62.509.100.2 100 mm 1 each 49.559.100.3 75 mm 1 each 41.909.1019.101.1 Single rubber stopper 1 each 28.609.101.2 Twin rubber stopper 1 each 71.559.102 1 each 62.409.103 1 each 706.159.104 1 metre 55.859.1059.105.1 1 sqm 1145.709.105.2 1 sqm 983.109.105.3 1 sqm 1129.459.105.4 1 sqm 1089.959.1069.106.1 125x34x24 mm weighing not less than 23 gms 1 each 38.609.106.2 150x34x24 mm weighing not less than 26 gms 1 each 43.259.1079.107.1 1 each 58.909.107.2 1 each 77.209.1089.108.1 152x42x18 mm weighing not less than 60 gms 1 each 81.309.108.2 202x42x18 mm weighing not less than 78 gms 1 each 100.309.109 1 each 33.609.110 1 sqm 328.909.1119.111.1 50x50 mm (base and height) 1 metre 170.959.112 1 metre 44.159.113 1 each 410.009.114

Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete :

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS :

Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :

Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10

Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum board conforming to IS: 66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous 66 mm overall thickness partition using 8 mm thick double skin non- asbestos multipurpose cement board reinforced Providing and fixing PTMT handles with necessary screws etc. complete.

Providing and fixing PTMT Butt hinges with necessary screws etc. complete.75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gmsProviding and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete.

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron Providing and fixing 2nd class teak wood lipping / moulded beading or taj beading of size 18X5 mm fixed with wooden Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary

ItemNo Description Unit Rate9.114.1 Triple strip vertical type 1 each 21.909.114.2 Double strip (horizontal type) 1 each 18.459.115 1 one set 177.509.116 1 each 11.109.1179.117.1 Extruded section profile size 48x40 mm 1 metre 185.159.117.2 Extruded section profile size 42x50 mm 1 metre 177.059.118 Providing and fixing to existing door frames.9.118.1 1 sqm 2471.109.118.2 1 sqm 2587.259.118.3 1 sqm 2500.159.119 1 metre 404.609.1209.120.1 30 mm thick plain PVC door shutters 1 sqm 2499.209.120.2 30 mm thick pre laminated PVC door shutters 1 sqm 2958.009.121 1 metre 445.259.122 Providing and fixing to existing door frames.9.122.1 1 sqm 2139.159.122.2 1 sqm 2441.109.123 1 metre 334.909.1249.124.1 Non decorative finish 1 sqm 2609.559.124.2 Decorative finish (both side wood grained finish) 1 sqm 3050.909.125 1 sqm 632.409.1269.126.1 Marine plywood conformingto IS : 710 1 sqm 1457.709.126.2 Fire retardant plywood conforming to IS : 5509 1 sqm 1506.259.1279.127.1 1.5 mm thick 1 sqm 756.059.127.2 1.0 mm thick 1 sqm 596.309.128 1 sqm 4560.409.129 1 sqm 1442.809.1309.130.1 1 sqm 1239.509.130.2 With non decorative veneering on both sides 1 sqm 1146.609.1319.131.1 25 mm thick 1 sqm 1179.809.132 1 kg 400.759.1339.133.19.133.1.1 10 mm thick 1 sqm 854.559.133.29.133.2.1 8 mm thick 1 sqm 644.959.133.3 Gypsum board conforming to IS: 2095 Part - I9.133.3.1 12.5 mm thick 1 sqm 586.159.1349.134.1 35 mm thick shutters9.134.1.19.134.1.1.1 Second class teak wood 1 sqm 3139.759.134.1.1.2 Kiln seasoned and chemically treated hollock wood 1 sqm 2143.059.134.1.1.3 Kiln seasoned selected class of sheesham wood 1 sqm 2965.059.134.1.2 With ISI marked stainless steel butt hinges of required size9.134.1.2.1 Second class teak wood 1 sqm 3237.209.134.1.2.2 Kiln seasoned and chemically treated hollock wood 1 sqm 2240.509.134.1.2.3 Kiln seasoned selected class of sheesham wood 1 sqm 3062.50

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below

24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high

Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade With decorative veneering on one side and commercial veneering on other sideProviding and fixing factory made shutters of pre-laminated particle board flat pressed three layer or graded wood particle Providing and fixing aluminum U beading of required size to Pre laminated / flush door shutter, including fixing etc. Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber Non-asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process

Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average with ISI marked M.S. pressed butt hinges bright finished of required size

ItemNo Description Unit Rate9.134.2 30 mm thick shutters9.134.2.19.134.2.1.1 Second class teak wood 1 sqm 2814.509.134.2.1.2 Kiln seasoned and chemically treated hollock wood 1 sqm 1962.359.134.2.1.3 Kiln seasoned selected class of sheesham wood 1 sqm 2665.009.134.2.2 With ISI marked stainless steel butt hinges of required size9.134.2.2.1 Second class teak wood 1 sqm 2911.959.134.2.2.2 Kiln seasoned and chemically treated hollock wood 1 sqm 2059.809.134.2.2.3 Kiln seasoned selected class of sheesham wood 1 sqm 2762.409.1359.135.1 With 2nd class teak wood beading 62X19 mm 1 sqm 1433.759.135.2 With 12 mm mild steel U beading 1 sqm 1160.309.136 1 metre 1161.459.137 1 sqm 5727.209.1389.138.1 1 sqm 25435.159.139 1 Nos 5873.259.1409.140.1 12 mm thick commercial ply conforming to IS : 1328 BWR type 1 sqm 863.359.141 1 metre 545.309.1429.142.1 Non decorative finish (matt finish) 1 sqm 2579.659.142.2 Decorative finish (wood grained finish) 1 sqm 3100.009.143 1 metre 389.609.144 1 sqm 2703.409.145 1 metre 400.059.146 1 sqm 2790.509.1479.147.19.147.1.1 Frame (50 mm x 50 mm) 1 metre 373.759.147.1.2 Sash (Style and Rail) (62 mm x 34 mm) 1 metre 357.909.147.1.3 Mullion (intermediate Section) (66 mm x 50 mm) 1 metre 394.509.147.1.4 1 metre 82.659.147.1.5 Glazing bead (12 mm x 18 mm) 1 metre 113.159.147.2 Casement Window (With friction hinge & outward opening)9.147.2.1 Casement Frame (67 mm x 62 mm) 1 metre 425.009.147.2.2 1 metre 455.509.147.2.3 Casement Glazing bead (35 mm x 18 mm) 1 metre 152.209.147.3 Sliding Window (Two Track, 2/4 Shutters)9.147.3.1 Two Track Sliding Frame (67 mm x 52 mm) 1 metre 494.659.147.3.2 Sliding window Sash (60 mm x 44 mm) 1 metre 454.409.147.3.3 1 metre 118.859.147.3.4 Sliding Glazing bead (35 mm x 18 mm) 1 metre 152.209.147.4 Sliding Door (Two Track, 2/4 Shutters)9.147.4.1 Two Track Sliding Frame (67 mm x 52 mm) 1 metre 478.909.147.4.2 Sliding Door Sash (80 mm x 44 mm) 1 metre 587.159.147.4.3 1 metre 118.859.147.4.4 Sliding Glazing bead (35 mm x 18 mm) 1 metre 152.209.1489.148.1 200 x 19 x 1.9 mm 1 each 271.609.148.2 250 x 19 x 1.9 mm 1 each 329.709.148.3 300 x 19 x 1.9 mm 1 each 416.809.148.4 350 x 19 x 1.9 mm 1 each 474.909.148.5 400 x 19 x 1.9 mm 1 each 591.009.149 1 each 179.70

with ISI marked M.S. pressed butt hinges bright finished of required size

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I.sheet Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading With clear fire resistant glass panes 6 mm thick of approved brand, having minimum 60 minutes fire resistanceProviding and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Providing and fixing plain lining with necessary screws/nuts & bolts/nails, including a coat of approved primer on one face, Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed Providing and Fixing factory made uPVC white colour casement/sliding window/ door, made of extruded profiles. Casement Window (Outward/Inward opening) with hinge System

‘T' Profile (one vertical length in between two shutters) (24 mm x 34.5 mm)

Casement Window Sash/Mullion (67mm x 75mm ) (style, rail and intermediate section)

Sliding Interlock for Window (one vertical length in each shutter)( 45.5 mm x 28 mm)

Sliding Interlock for Door (one vertical length in each shutter) (45.5 mm x 28 mm)Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung uPVC windows, of approved

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with

ItemNo Description Unit Rate9.150 1 each 121.609.151 1 each 63.559.152 1 each 98.359.153 1 each 121.609.154 1 kg 80.8510.1 1 kg 59.9010.2 1 kg 66.5010.3 1 sqm 4234.2510.4 1 sqm 2996.4010.510.5.1 Using M.S. angels 40x40x6 mm for diagonal braces 1 sqm 2551.4510.5.2 1 sqm 2427.1510.610.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover 1 sqm 1840.8510.6.2 80x1.20 mm M.S. laths with 1.20 mm thick top cover 1 sqm 1583.4010.6.3 80x0.90 mm M.S. laths with 0.90 mm thick top cover 1 sqm 1476.9010.7 Providing and fixing ball bearing for rolling shutters. 1 each 429.8510.810.8.1 Exceeding 10.00 sqm and upto 16.80 sqm in the area 1 sqm 627.3510.8.2 Exceeding 16.80 sqm in area 1 sqm 662.2010.9 1 sqm 261.3510.1010.10.1 1 kg 27.7010.10.2 1 kg 15.0010.1110.11.1 1 kg 96.4510.11.2 1 kg 68.7510.12 1 metre 29.2510.1310.13.1 1 kg 73.4510.13.2 1 kg 70.4010.1410.14.1 Profile B10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb 1 metre 346.7510.14.1.2 1 metre 339.8510.14.2 Profile C10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb 1 metre 370.0010.14.2.2 1 metre 363.1010.14.3 Profile E10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb 1 metre 404.8510.14.3.2 1 metre 397.9010.1510.15.1 1 kg 121.7010.15.2 1 kg 114.3010.1610.16.1 Hot finished welded type tubes 1 kg 85.1010.16.2 Hot finished seamless type tubes 1 kg 97.3010.16.3 Electric resistance or induction butt welded tubes 1 kg 105.8510.17 1 each 106.3010.18 1 each 117.4510.19 1 kg 67.8010.20 1 kg 86.5510.21 Providing and fixing M.S. rivets of sizes in position. 1 kg 111.8010.22 1 cm 2.2010.23 Item Shifted to Sub head 14 as item 14.73

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete.Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the Using flats 30x6 mm for diagonal braces and central cross pieceSupplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their

Extra for providing mechanical device chain and crank operation for operating rolling shutters.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side / top / centre hung, with Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Extra for providing and fixing steel beading of size 10 x 10 x 1.6 mm (box type), approved shape and section with screws Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

Fixing with carbon steel galvanised dash fastener of required dia and size ( to be paid for separately)Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting,

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or Providing and fixing circular / hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.Providing and fixing bolts including nuts and washers complete. Welding by gas or electric plant including transportation of plant at site etc. complete.

ItemNo Description Unit Rate10.24 Item Shifted to Sub head 14 as item 14.7410.2510.25.1 1 kg 67.2010.25.2 1 kg 77.9010.2610.26.1 M.S. tube 1 kg 86.4510.26.2 E.R.W. tubes 1 kg 109.9510.26.3 G.I. pipes 1 kg 93.3010.2710.27.1 10 x60 mm 1 each 54.9510.27.2 10 x80 mm 1 each 59.9010.27.3 10 x120 mm 1 each 74.2010.27.4 10 x140 mm 1 each 81.3010.27.5 10 x160 mm 1 each 103.0010.28 1 kg 558.0010.2910.29.1 1 sqm 458.9010.29.2 1 sqm 1134.5010.3010.30.1 4.0 mm thick glass panes 1 sqm 657.7510.30.2 5.5 mm thick glass panes 1 sqm 836.6511.111.1.1 1:4 (1 cement : 4 coarse sand) 1 sqm 489.2011.1.2 1:6 (1 cement : 6 coarse sand) 1 sqm 455.9011.2 1 sqm 339.5511.311.3.1 40 mm thick with 20 mm nominal size stone aggregate 1 sqm 280.0511.4 1 sqm 420.5511.5 1 sqm 464.8011.611.6.1 18 mm thick 1 sqm 258.2011.7 1 cum 4725.9511.8 1 sqm 24.1011.911.9.1 Dark shade pigment with ordinary cement 1 sqm 462.5011.9.2 Light shade pigment with white cement 1 sqm 500.4011.9.3 1 sqm 480.6511.9.4 White cement without any pigment 1 sqm 478.5011.9.5 Light shade pigment with ordinary cement 1 sqm 467.4511.9.6 Ordinary cement without any pigment 1 sqm 443.1011.1011.10.1 Dark shade pigment with Ordinary cement 1 sqm 478.4511.10.2 Light shade pigment with white cement 1 sqm 532.5011.10.3 1 sqm 504.3011.10.4 White cement without any pigment 1 sqm 503.2511.10.5 Light shade pigment with ordinary cement 1 sqm 483.4011.10.6 Ordinary cement without any pigment 1 sqm 451.6011.1111.11.1 Dark shade pigment with ordinary cement 1 sqm 501.6511.11.2 Light shade pigment with white cement 1 sqm 577.4011.11.3 1 sqm 537.8511.11.4 White cement without any pigment 1 sqm 530.4011.11.5 Light shade pigment with ordinary cement 1 sqm 511.5511.11.6 Ordinary cement without any pigment 1 sqm 464.5511.12

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all completeIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksProviding and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and

Providing and fixing carbon steel galvanised ( minimum coating 5 micron ) dash fastener of 10 mm dia double

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sidesStainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sidesProviding & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with :

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc..40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete

Medium shade pigment with 50% white cement and 50% ordinary cement

40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31 mm thick cement concrete

Medium shade pigment with 50% white cement and 50% ordinary cement

40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete

Medium shade pigment with 50% white cement and 50% ordinary cement

Marble chips skirting upto 30 cm height, rubbed and polished to granolithic finish, top layer 6 mm thick with white, black,

ItemNo Description Unit Rate11.12.111.12.1.1 Dark shade pigment with ordinary cement 1 sqm 603.7511.12.1.2 Light shade pigment with white cement 1 sqm 641.6511.12.1.3 1 sqm 621.9011.12.1.4 White cement without any pigment 1 sqm 619.7511.12.1.5 Light shade pigment with ordinary cement 1 sqm 608.7011.12.1.6 Ordinary cement without any pigment 1 sqm 584.3511.1311.13.1 40 mm wide and 4 mm thick 1 metre 29.4011.14 1 sqm 26.7511.1511.15.1 18 mm thick crazy marble stone white, black or as specified 1 sqm 723.9011.1611.16.1 Light shade pigment using white cement 1 sqm 769.3511.16.2 1 sqm 722.3011.16.3 Dark shade pigment using ordinary cement 1 sqm 677.1011.16.4 Ordinary cement without any pigment 1 sqm 639.2511.17 1 sqm 32.9011.1811.18.1 Light shade pigment using white cement 1 sqm 966.8511.18.2 1 sqm 909.1011.18.3 Dark shade pigment using ordinary cement 1 sqm 854.0511.18.4 Ordinary cement without any pigment 1 sqm 806.4011.1911.19.1 Light shade pigment using white cement 1 sqm 846.0011.19.2 1 sqm 773.4011.19.3 Dark shade pigment using ordinary cement 1 sqm 709.0011.19.4 Ordinary cement without any pigment 1 sqm 671.3011.2011.20.1 Light shade pigment using white cement 1 sqm 953.2011.20.2 1 sqm 789.5511.20.3 Dark shade pigment using ordinary cement 1 sqm 602.1511.20.4 Ordinary cement without any pigment 1 sqm 564.3511.2111.21.111.21.1.1 Acid and alkali resistant tile 1 sqm 1075.6011.21.211.21.2.1 Acid and alkali resistant tile 1 sqm 1129.9511.2211.22.1 Marble tiles (polished) Raj Nagar11.22.1.1 8 mm thick 1 sqm 748.1511.2311.23.1 Makrana white second quality 1 sqm 3008.4511.23.2 Raj Nagar plain 1 sqm 1265.3511.23.3 Agaria White 1 sqm 1993.3011.23.4 Black Zebra 1 sqm 1165.1511.23.5 Udaipur green marble 1 sqm 1418.9511.23.6 Pink plain marble 1 sqm 1352.1511.24 1 metre 197.7511.25 1 sqm 230.5511.2611.26.1 25 mm thick 1 sqm 945.7011.27 1 sqm 954.1011.2811.28.1 Red sand stone 1 sqm 462.20

18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 coarse sand)

Medium shade pigment with 50% white cement and 50% ordinary cement

Providing and fixing glass strips in joints of terrazo / cement concrete floors.Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width, including cost of forming, nosing Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder Precast terrazo tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with neat Medium shade pigment using 50% white cement and 50% ordinary cement

Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width.Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm, in skirting and risers of steps not exceeding Medium shades pigment using 50% white cement and 50% ordinary cement

Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry Medium shade pigment using 50% white cement, 50% ordinary cement

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed Medium shade pigment using 50% white cement 50% Grey cement

Providing and fixing 10 mm thick acid and / or alkali resistant tiles of approved make and colour using acid and / or alkali In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Tile work in skirting, risers of steps and dado upto 2 m height, over 12 mm thick bed of cement mortar 1:3 (1 cement :3

Marble stone flooring with 18 mm thick marble stone as per sample of marble approved by Engineer-in-Charge, over 20

Extra for pre finished nosing to treads of steps of marble stone.Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre.Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1 cement : 5 coarse sand)

ItemNo Description Unit Rate11.28.2 White sand stone 1 sqm 481.4011.2911.29.1 Red sand stone 1 sqm 538.3011.29.2 White sand stone 1 sqm 557.5011.3011.30.1 Red sand stone 1 sqm 591.4011.30.2 White sand stone 1 sqm 610.5511.31 1 metre 52.4511.32 1 sqm 12.1011.3311.33.1 Second class teak wood 1 sqm 3049.0511.33.2 Second class deodar wood 1 sqm 2045.6011.34 1 sqm 5455.3011.35 1 kilogram 77.5011.36 1 sqm 724.2511.37 1 sqm 764.5511.38 1 sqm 772.9011.39 1 sqm 931.5011.40 1 sqm 961.2511.4111.41.1 Size of Tile 500x500 mm 1 sqm 1182.3511.41.2 Size of Tile 600x600 mm 1 sqm 1337.1011.41.3 Size of Tile 800x800 mm 1 sqm 1579.4011.41.4 Size of Tile 1000x1000 mm 1 sqm 2246.1011.42 1 sqm 360.1511.43 1 sqm 336.7511.44 1 sqm 347.2511.45 1 sqm 1651.2011.4611.46.1 Size of Tile 500x500 mm 1 sqm 1184.4011.46.2 Size of Tile 600x600 mm 1 sqm 1339.2011.46.3 Size of Tile 800x800 mm 1 sqm 1583.2511.46.4 Size of Tile 1000x1000 mm 1 sqm 2249.9511.4711.47.1 Size of Tile 500x500 mm 1 sqm 1349.1011.47.2 Size of Tile 600x600 mm 1 sqm 1503.9011.47.3 Size of Tile 800x800 mm 1 sqm 1747.9511.47.4 Size of Tile 1000x1000 mm 1 sqm 2414.6511.4811.48.1 Size of Tile 500x500 mm 1 sqm 194.2511.48.2 Size of Tile 600x600 mm 1 sqm 164.1011.48.3 Size of Tile 800x800 mm 1 sqm 133.9511.48.4 Size of Tile 1000x1000 mm 1 sqm 98.0011.4911.49.1 Size of Tile 500x500 mm 1 sqm 1302.9511.49.2 Size of Tile 600x600 mm 1 sqm 1457.7011.49.3 Size of Tile 800x800 mm 1 sqm 1701.7511.49.4 Size of Tile 1000x1000 mm 1 sqm 2368.4511.50 1 sqm 7.1512.112.1.1 1.00 mm thick with zinc coating not less than 275 gm/ m2 1 sqm 878.4512.1.2 0.80 mm thick with zinc coating not less than 275 gm/ m2 1 sqm 742.8012.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m2 1 sqm 627.2512.212.2.1 1.00 mm thick 1 metre 31.80

40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 coarse

40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand)

Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab.Extra for Kota stone / sand stone in treads of steps and risers using single length up to 1.05 metre.25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:

38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water

Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts

Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq decimeter for chimney

ItemNo Description Unit Rate12.2.2 0.80 mm thick 1 metre 25.4512.2.3 0.63 mm thick 1 metre 25.4512.312.3.1 1.00 mm thick 1 metre 183.9512.3.2 0.80 mm thick 1 metre 146.9512.3.3 0.63 mm thick 1 metre 146.9512.412.4.1 0.80 mm thick with zinc coating not less than 275 gm/ m2 1 metre 470.1012.4.2 0.63 mm thick with zinc coating not less than 275 gm/ m2 1 metre 411.4012.512.5.1 1.60 mm thick with zinc coating not less than 350 gm/ m2 1 metre 893.9512.612.6.1 1.00 mm thick with zinc coating not less than 275 gm/ m2 1 metre 350.1012.712.7.1 0.80 mm thick with zinc coating not less than 275 gm/ m2 1 metre 439.0512.7.2 0.63 mm thick with zinc coating not less than 275 gm/ m2 1 metre 390.1512.8 1 sqm 375.7512.9 1 metre 25.4512.10 1 metre 70.3512.11 1 metre 109.3012.1212.12.1 Corrugated serrated adjustable ridges 1 metre 316.0012.12.2 Plain wing adjustable ridges 1 metre 316.0012.12.3 Close fitting adjustable ridges 1 metre 360.4512.12.4 Unserrated adjustable hips 1 metre 427.3512.1312.13.1 Corrugated apron pieces 1 metre 288.3012.13.2 Eave's filler pieces 1 metre 198.9512.13.3 North light curves 1 metre 424.3512.13.4 Ventilator curves 1 metre 522.5012.13.5 Barge boards 1 metre 517.3512.13.6 Ridge finials 1 pair 189.4012.13.7 Special north light curves 1 each 671.3512.13.8 S type louvers 1 metre 287.3012.14 1 metre 46.4012.1512.15.1 With residual type petroleum bitumen of grade VG-10 1 sqm 105.5012.1612.16.1 1 sqm 375.6012.1712.17.1 1 sqm 402.1012.18 Extra for every additional 1 cm thickness of mud phaska. 1 sqm 8.6512.1912.19.1 1 sqm 283.6512.20 1 sqm 431.9012.2112.21.1 In 75x75 mm deep chase 1 metre 109.0512.22 1 each 148.7512.2312.23.1 Red sand stone slab12.23.1.1 40 to 50 mm thick 1 sqm 390.4012.23.2 White sand stone slab12.23.2.1 40 to 50 mm thick 1 sqm 415.9512.2412.24.1 Natural colour insulating board

Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimeter:

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8

Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts, G.I. Providing and fixing 15 cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts,

Providing non-asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS : 14871) Extra for straight cutting in non- asbestos polypropylene reinforced cement corrugated, semi-corrugated 6 mm thick Extra for circular cutting in non-asbestos polypropylene reinforced cement corrugated / semi-corrugated 6 mm thick Extra for providing and fixing wind ties of 40x6 mm flat iron section.Providing and fixing ridges and hips in non-asbestos fibre cement high impact polypropylene reinforced roofing with

Providing and fixing non-asbestos fibre cement high impact polypropylene reinforced roofing accessories in all colours

Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/G.S. Painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm With common burnt clay F.P.S. (non modular) brick tile of class designation 10 10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm with machine moulded common burnt clay F.P.S. (non modular) brick tiles of class designation - 12.50, conforming to Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of With common burnt clay F.P.S. (non modular) brick tiles class designation 10Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 Providing sand stone slab for roofing and laying them in cement mortar 1:4 (1 cement : 4 coarse sand) over wooden

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be

ItemNo Description Unit Rate12.24.1.1 12 mm thick 1 sqm 508.2012.24.2 White face insulating board12.24.2.1 12 mm thick 1 sqm 623.2012.24.3 Flame retardant face insulating board12.24.3.1 12 mm thick 1 sqm 565.7012.2512.25.1 12 mm thick 1 sqm 578.0012.2612.26.1 6 mm thick cement board 1 sqm 395.3012.27 Extra for Circular cutting including wastages in ceiling with: 12.27.1 2nd class teak wood planks 20 mm thick 1 metre 345.7012.27.2 Natural colour insulating board 12.27.2.1 12 mm thick 1 metre 165.7512.27.3 White face insulating board12.27.3.1 12 mm thick 1 metre 180.0512.27.4 Flame retardant face insulating board12.27.4.1 12mm thick 1 metre 172.9012.27.5 Standard quality hard board sheet12.27.5.1 3 mm thick 1 metre 140.2012.27.5.2 4.5 mm thick 1 metre 143.4012.28 1 sqm 124.0512.29 1 sqm 588.7012.30 1 sqm 360.0512.3112.31.1 Flat surfaces 1 sqm 676.1512.31.2 Curved surfaces 1 sqm 771.6012.32 1 sqm 189.2512.33 1 73.5512.34 1 sqm 431.7012.35 1 sqm 226.1012.3612.36.1 With Type N - Normal 50 mm thick 1 sqm 200.9012.36.2 With Type SE - Self Extinguishing type 50 mm thick 1 sqm 232.8512.3712.37.1 Stone ware spout 1 each 68.1012.3812.38.1 100 mm diameter 1 each 112.5012.38.2 150 mm diameter 1 each 121.8012.3912.39.1 100 mm dia pipe 1 each 207.8512.39.2 150 mm dia pipe 1 each 287.1012.4012.40.1 Sand cast iron plain shoes12.40.1.1 150 mm diameter 1 each 407.8512.4112.41.1 75 mm diameter 1 metre 124.9012.41.2 110 mm diameter 1 metre 206.9012.4212.42.1 Coupler 12.42.1.1 75 mm 1 each 97.6012.42.1.2 110 mm 1 each 130.2512.42.2 Single pushfit Coupler 12.42.2.1 75 mm 1 each 116.1512.42.2.2 110 mm 1 each 163.9512.42.3 Single tee with door

Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS : 3087 Providing and fixing plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws

Extra for providing and fixing ceiling to curved surfaces in narrow widths.Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class

Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. Extra for providing plaster of Paris (Gypsum anhydrous) ceiling above 5 metres height from floor level.

sqm per metre Providing and fixing thermal insulation of ceiling (under deck

insulation) with Resin Bonded Fibre glass wool conforming to Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183, density 16 kg/m3 , 50 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions

Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand).Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and

Providing lead caulked joints to sand cast iron rain water pipes and fittings:

Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water

ItemNo Description Unit Rate12.42.3.1 75x75x75 mm 1 each 207.9512.42.3.2 110x110x110 mm 1 each 302.0512.42.4 Single tee without door 12.42.4.1 75x75x75 mm 1 each 184.7012.42.4.2 110x110x110 mm 1 each 241.6512.42.5 Bend 87.5° 12.42.5.1 75 mm bend 1 each 104.5512.42.5.2 110 mm bend 1 each 156.9512.42.6 Shoe (Plain) 12.42.6.1 75 mm Shoe 1 each 163.8012.42.6.2 110 mm Shoe 1 each 287.0512.4312.43.1 75 mm 1 each 127.1512.43.2 110 mm 1 each 144.6012.44 1 each 32.7512.4512.45.1 1 sqm 691.4012.45.2 1 sqm 785.3512.45.3 12.5 mm thick tapered edge gypsum moisture resistant board 1 sqm 826.8012.45.4 1 sqm 1626.8012.46 1 each 96.6512.4712.47.1 1 sqm 932.5012.47.2 2 mm thick flat 1 sqm 822.0512.48 1 sqm 249.6512.49 1 sqm 127.0012.50 1 sqm 601.7512.5112.51.1 Ridges plain (500 - 600 mm) 1 metre 620.7512.51.2 Flashings / Aprons ( Upto 600 mm) 1 metre 602.5012.51.3 North light curves 1 metre 648.6512.51.4 Barge board (Upto 300 mm) 1 metre 567.0512.51.5 Crimp curve 1 sqm 620.8512.51.6 Gutter (600 mm over all girth) 1 metre 750.7012.5212.52.1 1 sqm 1425.9012.52.2 1 sqm 1538.6012.52.3 1 sqm 1029.6012.52.4 1 sqm 1048.2012.53 1 sqm 1566.0012.5412.54.1 1 sqm 1610.8512.54.2 1 sqm 1737.7012.55 1 sqm 1033.7012.56 1 sqm 1077.1512.57 1 sqm 304.9513.1 12 mm cement plaster of mix:13.1.1 1:4 (1 cement : 4 fine sand) 1 sqm 123.5013.1.2 1:6 (1 cement : 6 fine sand) 1 sqm 112.5013.213.2.1 1:4 (1 cement : 4 fine sand) 1 sqm 143.3513.2.2 1:6 (1 cement : 6 fine sand) 1 sqm 130.2013.3 20 mm cement plaster of mix:13.3.1 1:4 (1 cement : 4 fine sand) 1 sqm 173.3013.3.2 1:6 (1 cement : 6 fine sand) 1 sqm 156.15

Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part IFully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing up to any pitch, including fixing with polymer 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified. Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I , Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24

15 mm cement plaster on the rough side of single or half brick wall of mix:

ItemNo Description Unit Rate13.4 12 mm cement plaster of mix:13.4.1 1:4 (1 cement : 4 coarse sand) 1 sqm 132.1013.4.2 1:6 (1 cement : 6 coarse sand) 1 sqm 121.0513.513.5.1 1:4 (1 cement : 4 coarse sand) 1 sqm 153.6013.5.2 1:6 (1 cement : 6 coarse sand) 1 sqm 140.4513.6 20 mm cement plaster of mix:13.6.1 1:4 (1 cement : 4 coarse sand) 1 sqm 186.7013.6.2 1:6 (1 cement : 6 coarse sand) 1 sqm 169.5013.713.7.1 1:3 (1 cement : 3 fine sand) 1 sqm 164.5013.7.2 1:4 (1 cement : 4 fine sand) 1 sqm 153.4513.813.8.1 1:3 (1 cement : 3 fine sand) 1 sqm 186.5013.8.2 1:4 (1 cement : 4 fine sand) 1 sqm 173.3013.913.9.1 12 mm cement plaster 1 sqm 173.1013.9.2 20 mm cement plaster 1 sqm 233.8013.10 1 sqm 196.7513.11 1 sqm 182.9013.12 1 sqm 198.2513.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust) 1 sqm 152.0513.14 1 sqm 177.4513.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust) 1 sqm 217.7513.16 6 mm cement plaster of mix:13.16.1 1:3 (1 cement : 3 fine sand) 1 sqm 101.0013.17 1 sqm 136.2513.18 Neat cement punning 1 sqm 31.1013.1913.19.1 Ordinary cement finish using ordinary cement 1 sqm 315.3013.20 1 sqm 300.1513.21 1 37.4013.22 1 sqm 28.8513.2313.23.1 In one coat 1 sqm 13.6513.23.2 In two coats 1 sqm 20.9013.2413.24.1 In one coat 1 sqm 195.9513.24.2 In two coats 1 sqm 322.4013.25 Extra for plastering : 13.25.1 Spherical ceiling 1 sqm 50.9013.25.2 Groined ceiling 1 sqm 55.5013.25.3 Flewing soffits 1 sqm 33.3513.26 1 sqm 83.8013.27 1 sqm 31.3513.2813.28.1 Flush Band 1 2.3513.28.2 Sunk Band 1 2.5513.28.3 Raised Band 1 2.8513.28.4 Moulded Band 1 4.7013.2913.29.1 Flush Band 1 2.9013.29.2 Sunk Band 1 3.1513.29.3 Raised Band 1 3.5513.29.4 Moulded Band 1 6.35

15 mm cement plaster on rough side of single or half brick wall of mix:

12 mm cement plaster finished with a floating coat of neat cement of mix:

15 mm cement plaster on rough side of single or halfbrick wall finished with a floating coat of neat cement of mix :

cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.

15 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 15 mm cement plaster 1:2 (1 cement : 2 stone dust) on the rough side of single or half brick wall.

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the

per bag of 50 kg Extra for plastering exterior walls of height more than 10 m

from ground level for every additional height of 3 m or part Extra for plastering on circular work not exceeding 6 m in radius.

Extra for plastering done on moulding cornices or architraves including neat finish to line and level:

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even Extra for lining out plaster to imitate stone or concrete blocks walling. 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) : cm per

metrecm per metrecm per metrecm per metre18 mm thick plain cement mortar band in cement mortar 1:4

(1 cement : 4 fine sand): cm per metrecm per metrecm per metrecm per metre

ItemNo Description Unit Rate13.30 1 6.4013.3113.31.1 Flush / Ruled / Struck or weathered pointing 1 sqm 78.3513.31.2 Raised and cut pointing 1 sqm 126.9013.3213.32.1 Flush / Ruled / Struck or weathered pointing 1 sqm 107.3513.3313.33.1 Flush / Ruled pointing 1 sqm 111.8013.33.2 Raised and cut pointing 1 sqm 201.8513.34 1 sqm 219.3013.3513.35.1 Flush / Ruled pointing 1 sqm 63.7513.36 1 sqm 4.6513.37 White washing with lime to give an even shade: 13.37.1 New work (three or more coats) 1 sqm 11.7513.38 Satna lime wash on walls with one coat 1 sqm 4.7513.3913.39.1 1 sqm 16.1513.39.2 New work (two or more coats) with a base coat of whiting 1 sqm 15.8513.40 1 sqm 50.3013.4113.41.1 1 sqm 64.6513.4213.42.1 Two or more coats on new work 1 sqm 37.3513.4313.43.1 Water thinnable cement primer 1 sqm 25.5013.4413.44.1 New work (Two or more coats applied @ 3.84 kg/ 10 sqm) 1 sqm 44.9513.45 Finishing walls with textured exterior paint of required shade :13.45.1 1 sqm 117.7013.4613.46.1 1 sqm 67.5013.4713.47.1 1 sqm 80.4513.4813.48.1 1 sqm 78.7513.48.2 1 sqm 67.7013.48.3 1 sqm 70.4013.49 Deleted13.50 Applying priming coat: 13.50.1 1 sqm 25.8513.50.2 1 sqm 24.7013.50.3 1 sqm 20.7013.50.4 1 sqm 11.4013.5113.51.1 One coat 1 sqm 48.9513.51.2 Two coats 1 sqm 77.8513.5213.52.1 On steel work 1 sqm 105.5013.52.2 On concrete work 1 sqm 108.5513.5313.53.1 1 sqm 59.3513.54 Applying a coat of mordant solution on G.S. sheet: 13.54.1 1 sqm 20.1513.54.2 1 sqm 19.95

18 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5

cm per metrePointing on brick work or brick flooring with cement mortar

1:3 (1 cement : 3 fine sand) :

Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand):Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :

Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust)Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 fine sand):Extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or

Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with limeDistempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including priming coat with water thinnable cement primerDistempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer, of required shade Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Finishing walls with water proofing cement paint of required shade:

New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/ 10 sqm Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywoodWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel worksWith ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. With a solution of 38 gms of copper acetate in a litre of soft water With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and

ItemNo Description Unit Rate13.5513.55.1 100 mm diameter pipes 1 metre 25.6013.55.2 150 mm diameter pipes 1 metre 38.2013.5613.56.1 100 mm diameter pipes 1 metre 28.9013.56.2 150 mm diameter pipes 1 metre 43.1013.5713.57.1 New work (two or more coats) 1 sqm 18.7013.58 1 sqm 267.1513.59 1 sqm 24.5513.6013.60.1 Two or more coats on new work 1 sqm 60.2513.6113.61.1 Two or more coats on new work 1 sqm 53.8513.6213.62.1 1 sqm 78.8013.6313.63.1 Two or more coats on new work 1 sqm 47.7013.6413.64.1 Two or more coats on new work 1 sqm 50.5013.6513.65.1 Two or more coats on new work 1 sqm 44.5513.6613.66.1 Two or more coats on new work 1 sqm 57.0013.67 Varnishing with varnish of approved brand and manufacture: 13.67.1 1 sqm 80.6013.67.2 1 sqm 81.6013.68 French spirit polishing: 13.68.1 1 sqm 137.4513.6913.69.1 New work 1 sqm 60.5013.70 1 sqm 28.5013.71 1 1.7013.72 1 sqm 417.3513.7313.73.1 15 mm wide and 15 mm deep groove 1 metre 23.6513.73.2 20 mm wide and 15 mm deep groove 1 metre 24.1013.74 1 sqm 65.8513.75 1 sqm 41.1513.76 1 metre 72.1513.77 1 sqm 81.3013.78 1 sqm 214.4013.79 1 53.0013.80 1 sqm 76.0513.8113.81.1 One coat 1 sqm 21.2513.81.2 Two coats 1 sqm 34.4013.8213.82.1 One coat 1 sqm 37.6513.82.2 Two coats 1 Sqm 56.6013.8313.83.1 One coat 1 sqm 40.7513.83.2 Two coats 1 Sqm 61.4513.8413.84.1 One coat 1 sqm 35.70

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of

Painting with oil type wood preservative of approved brand and manufacture:Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat Coal tarring two coats on new work using 0.16 litre and 0.12 litre coal tar per sqm in the first coat and second coat Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and Painting with aluminium paint of approved brand and manufacture to give an even shade.Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade:Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats of glue sizing with copal varnish over an under coat of flatting varnishTwo or more coats glue sizing with spar varnish or an under coat of flatting varnishTwo or more coats on new works including a coat of wood fillerPolishing on wood work with ready mixed wax polish of approved brand and manufacture:Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. Lettering with black Japan paint of approved brand and manufacture

per letter per cm Washed stone grit plaster on exterior walls height upto 10

metre above ground level, in two layers, under layer 12 mm Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden

Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 Extra for washed stone grit plaster on circular work not exceeding 6 m in radius (in two coats).Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster.Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having Extra for addition of synthetic polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific

per bag of 50kg of Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of

ItemNo Description Unit Rate13.84.2 Two coats 1 Sqm 53.9013.8513.85.1 1 sqm 27.4013.85.2 1 sqm 24.3013.85.3 1 sqm 25.5014.114.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) 1 sqm 186.4014.1.2 With cement mortar 1:4 (1 cement : 4 coarse sand) 1 sqm 197.3514.214.2.1 Door chowkhats 1 each 600.1014.2.2 Window chowkhats 1 each 367.0514.2.3 Clerestory window chowkhats 1 each 267.9014.3 1 each 131.5514.414.4.1 For door / window / clerestory window 1 sqm 366.6514.514.5.1 Float glass panes of thickness 4 mm 1 sqm 585.2014.5.2 Float glass panes of thickness 5.5 mm 1 sqm 764.1014.614.6.1 Float glass panes of thickness 4 mm 1 sqm 724.6514.6.2 Float glass panes of thickness 5.5 mm 1 sqm 903.5014.7 Renewing glass panes and refixing existing wooden fillets: 14.7.1 Float glass panes of thickness 4 mm 1 sqm 610.8014.7.2 Float glass panes of thickness 5.5 mm 1 sqm 789.6514.8 Supplying and fixing new wooden fillets wherever necessary: 14.8.1 2nd class teak wood fillets 1 metre 29.8514.8.2 Hallock wood fillets 1 metre 24.3514.9 Renewal of old putty of glass panes (length). 1 metre 17.2514.10 Refixing old glass panes with putty and nails. 1 sqm 224.4514.11 1 sqm 190.4014.12 1 each 190.1014.13 1 sqm 206.3014.1414.14.1 Red / white sand stone slabs 30 to 50 mm thick 1 sqm 459.1014.1514.15.1 Sal wood battens 1 cum 63053.2014.1614.16.1 Not exceeding 4.00 metres in length14.16.1.1 Sal wood beams 1 cum 64870.7014.16.1.2 Hollock wood beams 1 cum 42131.0014.16.2 Above 4.00 metres and upto 5.00 metres length14.16.2.1 Sal wood beams 1 cum 65676.3014.16.2.2 Hollock wood beams 1 cum 42912.5014.17 1 sqm 19.8514.1814.18.1 With F.P.S. brick tiles 1 sqm 42.6514.18.2 With modular brick tiles 1 sqm 43.5514.19 1 kg 1.4514.20 1 metre 55.4514.21 1 kg 120.8014.2214.22.1 Wheel 50 mm dia and below 1 per wheel 111.1514.22.2 Wheel above 50 mm dia 1 per wheel 170.4514.23 1 kilo litre 72.5514.24 Mud mortar made with local clay good earth. 1 cum 301.10

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litreWith ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/litreWith water thinnable cement primer on wall surface having VOC content less than 50 grams/litreRepairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts,

Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners / chemical fasteners of appropriate size (3 nos Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :

Renewing glass panes, with wooden fillets wherever necessary :

Fixing old glass panes with wooden fillets (excluding cost of fillets). Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, Regrading terracing of mud phaska covered with tiles or brick, in cement by dismantling tiles or bricks, removing mud Replacing sand stone slabs in roofing, laid in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary repairs and Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by

Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat Renewing Wrought Iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps,

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

ItemNo Description Unit Rate14.25 1 cum 2583.6014.26 Providing and fixing 25 mm thick shutters for cup board etc. :14.26.1 Panelled or panelled & glazed shutters14.26.1.1 1 sqm 3069.8514.26.1.2 1 sqm 2532.1014.26.2 Glazed shutters14.26.2.1 1 sqm 3193.3014.26.2.2 1 sqm 2615.2014.2714.27.1 Second class teak wood 1 sqm 2714.2014.2814.28.1 20 mm diameter 1 metre 187.4514.28.2 25 mm diameter 1 metre 210.6514.29 1 kg 62.0014.3014.30.1 Sal wood 1 cum 62391.4014.30.2 Hollack wood 1 cum 39881.5014.3114.31.1 150 mm 1 each 387.4014.31.2 125 mm 1 each 329.3014.31.3 100 mm 1 each 209.4514.3214.32.1 150 mm 1 each 619.7014.32.2 125 mm 1 each 445.4514.32.3 100 mm 1 each 383.6514.3314.33.1 250 mm 1 each 176.8514.33.2 150 mm 1 each 152.4014.33.3 100 mm 1 each 111.7514.34 1 each 197.3014.3514.35.1 300 mm 1 each 83.5514.35.2 250 mm 1 each 80.6514.35.3 200 mm 1 each 74.8514.35.4 150 mm 1 each 71.9514.35.5 100 mm 1 each 60.3514.36 1 each 32.4514.37 1 each 42.9014.38 1 each 147.4514.39 1 each 379.6514.4014.40.1 125x70x4 mm (ordinary type) 1 each 129.2014.40.2 100x70x4 mm (ordinary type) 1 each 104.4514.40.3 75x65x4 mm (heavy type) 1 each 128.9014.40.4 75x40x2.5 mm (ordinary type) 1 each 67.9014.40.5 50x40x2.5 mm (ordinary type) 1 each 29.1014.41 1 each 177.4514.42 White washing with lime to give an even shade: 14.42.1 Old work (two or more coats) 1 sqm 7.0514.42.2 Old work (one or more coats) 1 sqm 4.3514.43 1 sqm 5.7014.44 1 sqm 21.2514.4514.45.1 Old work (one or more coats) 1 sqm 23.4014.46 1 sqm 7.50

Brick work with common burnt clay bricks of class designation 7.5 in mud mortar.

Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screwsIst class teak wood including nickel plated bright finished M.S. piano hinges with necessary screwsSuperior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screwsIst class teak wood including nickel plated bright finished M.S. piano hinges with necessary screwsProviding and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with Providing and fixing curtain rods of 1.25 mm thick brass plates with two brass brackets fixed with brass screws and wooden

Providing and fixing M.S. round or squre bars with M.S. flats at required spacing in wooden frames of windows and clerestory Providing joists (karries) including hoisting, fixing in position and applying wood preservative on unexposed surface etc.

Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :

Providing and fixing bright finished brass double acting spring hinges with necessary brass screws etc. complete :

Providing and fixing bright finished brass flush bolts with necessary brass screws etc. complete :

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to Providing and fixing finished brass hard drawn hooks and eyes:

Providing and fixing bright finished brass fan light pivot with necessary brass screws etc. complete.Providing and fixing 300 mm long bright finished brass chain with hook for fan light including necessary brass screws etc. Providing and fixing bright finished brass quadrant stay 300 mm long with necessary brass screws etc. complete.Providing and fixing bright finished brass helical door spring (superior quality).Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.

Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts,

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing

ItemNo Description Unit Rate14.4714.47.1 Old work (one or more coats) 1 sqm 30.3014.4814.48.1 75 mm diameter pipes 1 metre 19.1014.4914.49.1 75 mm diameter pipes 1 metre 9.3014.49.2 100 mm dia metre pipes 1 metre 12.2014.49.3 150 mm dia metre pipes 1 metre 17.4014.5014.50.1 75 mm diameter pipes 1 metre 19.9014.50.2 100 mm dia metre pipes 1 metre 28.2514.50.3 150 mm dia metre pipes 1 metre 42.1014.5114.51.1 75 mm diameter pipes 1 metre 9.7514.51.2 100 mm diameter pipes 1 metre 12.5514.51.3 150 mm diameter pipes 1 metre 17.8514.5214.52.1 Old work (one or more coats) 1 sqm 14.2514.5314.53.1 One or more coats on old work 1 sqm 39.3014.5414.54.1 One or more coats on old work 1 sqm 35.2014.5514.55.1 One or more coats on old work 1 sqm 30.7514.5614.56.1 One or more coats on old work 1 sqm 33.1514.5714.57.1 One or more coats on old work 1 sqm 29.8014.58 French spirit polishing: 14.58.1 One or more coats on old work 1 sqm 69.8014.5914.59.1 Old work 1 sqm 30.8014.60 1 1.1014.61 1 sqm 31.9514.6214.62.1 32 mm dia 1 each 44.1514.62.2 40 mm dia 1 each 45.3014.6314.63.1 One or more coats on old work 1 sqm 21.3514.6414.64.1 1 sqm 41.6514.64.2 Old work (one or more coats @ 2.20 kg/ 10 sqm) complete 1 sqm 28.4014.65 Finishing walls with textured exterior paint of required shade: 14.65.1 1 sqm 99.5014.65.2 Old work (One or more coats) applied @ 1.82 ltr/ 10 sqm 1 sqm 59.9014.6614.66.1 1 sqm 48.3014.66.2 Old work (One or more coat applied @ 0.90 ltr/ 10 sqm) 1 sqm 31.6514.6714.67.1 1 sqm 62.2014.67.2 Old work (one or more coats applied @ 0.83 ltr/ 10 sqm) 1 sqm 40.3014.69 Varnishing with varnish of approved brand and manufacture: 14.69.1 One or more coats with copal varnish 1 sqm 33.8514.69.2 One or more coats with spar varnish 1 sqm 34.4014.70 Melamine polishing on wood work (one or more coat). 1 sqm 64.20

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic

Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved

Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of

Painting with oil type wood preservative of approved brand and manufacture:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Painting with aluminium paint of approved brand and manufacture to give an even shade: Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade:

Polishing on wood work with ready made wax polish of approved brand and manufacture:Re-lettering with black japan paint of approved brand and manufacture.

per letter per cm Painting (one or more coats) with black japan paint of

approved brand and manufacturing to give an even shade.Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin:

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/ 10 sqm complete

Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/ 10 sqmFinishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coats applied @ 1.67 ltr/ 10 sqm) on existing cement paint surfaceFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

ItemNo Description Unit Rate14.71 1 sqm 32.0014.72 1 sqm 127.1014.72X Scaffolding 1 each 7820.6514.73 1 kg 373.1514.74 1 each 42.1015.1 1 cum 234.2015.215.2.1 1 cum 671.0515.2.2 1 cum 413.6515.3 1 cum 978.9515.4 1 cum 874.5015.5 1 sqm 325.1515.6 1 kg 2.6015.715.7.1 In mud mortar 1 cum 194.0015.7.2 In lime mortar with old mughal bricks 1 cum 489.5015.7.3 In lime mortar 1 cum 234.2015.7.4 In cement mortar 1 cum 566.6015.815.8.1 From brick work in mud mortar 1000 nos 1277.5515.8.2 From brick work in lime mortar 1000 nos 1474.1515.8.3 From brick work in cement mortar 1000 nos 1841.6015.915.9.1 In lime mortar 1 cum 318.9515.9.2 In cement mortar 1 cum 676.0515.1015.10.1 In lime mortar 1 cum 403.5015.10.2 In cement mortar 1 cum 790.8015.1115.11.1 In lime mortar 1 cum 131.5015.11.2 In cement mortar 1 cum 189.5515.1215.12.1 Of area 3 sq. metres and below 1 each 101.7015.12.2 Of area beyond 3 sq. metres 1 each 139.8515.1315.13.1 Of area 3 sq. metres and below 1 each 39.7015.13.2 Of area beyond 3 sq. metres 1 each 52.4515.1415.14.1 Of sectional area 40 square centimetres and above 1 cum 1231.1515.14.2 Of sectional area below 40 square centimetres 1 metre 4.9015.1515.15.1 Of sectional area 40 square centimetres and above 1 172.6515.15.2 Of sectional area below 40 square centimetres 1 0.5015.1615.16.1 Of sectional area 40 square centimetres and above 1 245.9015.16.2 Of sectional area below 40 square centimetres 1 0.9515.1715.17.1 R.S. Joists 1 kg 0.9515.17.2 Channels, angles, tees and flats 1 kg 0.6515.18 1 kg 1.5515.19 1 kg 1.0515.20 1 0.2515.21 1 0.2515.22 1 kg 1.2515.23

Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm Providing and fixing bright finished brass casement window fasteners or peg stays to windows/ ventilators with necessary Providing and fixing 14 mm bright finished brass spring catch to steel centre hung ventilators with necessary welding and Demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix )Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable Demolishing R.B. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or R.B. work (Payment shall be made on the Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall

Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually / by

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking

Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof cum per

metre metre per metre Extra for dismantling trusses, rafters, purlins etc. of wood

work for every additional height of one metre or part thereof cum per metre metre per metre Dismantling steel work in single sections including

dismembering and stacking within 50 metres lead in:

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond

kg per metre Extra for dismantling trusses, rafters, purlins etc. of steel work

for every additional height of one metre or part thereof kg per metre Extra for marking of structural steel work required to be re-

erected. Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

ItemNo Description Unit Rate15.23.1 For thickness of tiles 10 mm to 25 mm 1 sqm 20.3015.23.2 For thickness of tiles above 25 mm and up to 40 mm 1 sqm 31.2515.24 1 cum 363.3515.25 1 sqm 73.7015.26 1 sqm 29.0515.27 1 cum 251.4015.2815.28.1 G.S. Sheet 1 sqm 45.7015.28.2 Asbestos Sheet 1 sqm 21.6015.29 1 cum 736.9015.30 1 sqm 70.2515.31 1 sqm 58.2015.32 1 sqm 16.1015.33 1 metre 5.7515.3415.34.1 T' or 'L' iron or pipe 1 each 76.0015.34.2 R.C.C. 1 each 87.3515.35 1 each 7.2015.36 1 kg 10.1515.37 1 sqm 18.0015.38 1 sqm 21.1015.3915.39.1 Upto 10 mm thick 1 sqm 17.1515.39.2 Thickness above 10 mm upto 25 mm 1 sqm 21.8515.39.3 Thickness above 25 mm upto 40 mm 1 sqm 25.8515.4015.40.1 Thickness upto 40 mm 1 sqm 80.4015.40.2 Thickness above 40 mm upto 75 mm 1 sqm 120.3515.41 1 sqm 15.8515.4215.42.1 75 to 80 mm dia pipe 1 metre 20.8015.42.2 100 mm dia pipe 1 metre 21.5015.42.3 150 mm dia pipe 1 metre 22.1515.4315.43.1 Water bound macadam road 1 sqm 61.7015.43.2 Bituminous road 1 sqm 119.9515.4415.44.1 15 mm to 40 mm nominal bore 1 metre 44.1015.44.2 Above 40 mm nominal bore 1 metre 50.3015.4515.45.1 Up to 150 mm diameter 1 metre 131.8515.45.2 Above 150 mm dia upto 300 mm dia 1 metre 173.5015.45.3 Above 300 mm diameter 1 metre 223.5515.4615.46.1 Upto 600 mm diameter 1 metre 204.7515.46.2 Above 600 mm diameter 1 metre 508.8015.4715.47.1 Upto 150 mm diameter 1 metre 91.0515.47.2 Above 150 mm diameter 1 metre 110.6515.48 1 each 198.2515.49 1 each 116.5015.50 1 each 1298.1515.51 1 each 269.7015.52 1 each 261.9015.53

Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material Demolishing mud phaska in terracing and disposal of material within 50 metres lead.Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:

Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete

Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually / by

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually / by mechanical

Dismantling steel cylinder RC. pipes including excavation and refilling trenches after taking out the pipes, manually / by

Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials Dismantling of flushing cistern of all types (C.I. /PVC/Vitrous China) including stacking of useful materials near the site and Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres.

ItemNo Description Unit Rate15.53.1 Upto 150 mm diameter 1 each 95.1015.53.2 Above 150 mm diameter 1 each 331.8515.54 1 each 198.9015.5515.55.1 120 x 120 cm (outside to outside) 1 each 303.7015.55.2 210 x 120 cm (outside to outside) 1 each 465.9515.55.3 320 x 120 cm (outside to outside) 1 each 659.3015.56 1 sqm 15.0015.57 1 sqm 15.9015.58 1 cum 1075.9015.59 1 cum 166.7015.60 1 cum 101.7516.1 1 sqm 61.2516.2 1 cum 7.7516.3 Supplying and stacking at site. 16.3.1 90 mm to 45 mm size stone aggregate 1 cum 1010.7516.3.2 63 mm to 45 mm size stone aggregate 1 cum 1100.8016.3.3 53 mm to 22.4 mm size stone aggregate 1 cum 1190.8016.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm 1 cum 493.9016.3.5 Over burnt (Jhama) brick aggregate 90 mm to 45 mm 1 cum 528.7516.3.6 Stone screening 13.2 mm nominal size (Type A) 1 cum 1338.7516.3.7 Stone screening 11.2 mm nominal size (Type B) 1 cum 1425.8516.3.8 Red bajri 1 cum 1147.1016.3.9 Good earth 1 cum 260.7016.3.10 Moorum 1 cum 624.4516.4 1 cum 330.1516.516.5.1 Over burnt (Jhama) brick aggregate 120 mm to 40 mm 1 cum 246.3516.5.2 Over burnt (Jhama) brick aggregate 90 mm to 45 mm 1 cum 246.3516.616.6.1 With road roller / hand roller 1 sqm 11.6516.716.7.1 1 metre 84.2516.816.8.1 1 metre 23.8016.9 1 sqm 10.9016.10 1 sqm 105.1516.11 1 sqm 336.5016.1216.12.1 1 sqm 292.4016.1316.13.1 Bituminous portion 1 cum 1861.6016.13.2 Water bound macadam 1 cum 989.2516.14 1 sqm 92.4016.15 Supplying at site: 16.15.1 1 cum 16302.4516.15.2 1 kg 64.5516.16 1 each set 135.1516.1716.17.1 With G.I. barbed wire 1 metre 7.6016.1816.18.1 With G.I. barbed wire 1 metre 11.6016.19 1 kg 62.1016.20 1 sqm 20.6516.21 Engraving letters in hard stone 1 3.00

Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, Laying water bound macadam sub-base with brick aggregate and blinding material, earth etc. including screening, sorting

Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete including preparation of the Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Brick edging laid lengthwise with half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Scarifying metalled (water-bound) road surface including disposal of rubbish, lead upto 50 m and consolidation of the Making bajri path including preparation of subgrade, supplying and laying brick aggregate of 50 mm nominal size Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum

Cutting bajri paths and making good the same including supply of extra quantities of brick aggregate, moorum and red R.C.C. Standards post / struts / rails / pales of mix 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 12.5 mm Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of Supplying and fixing turn buckles and straining bolts for barbed wire fencing.Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in per cm

height per

ItemNo Description Unit Rate16.22 1 each 111.3016.23 1 each 380.5516.2416.24.1 35x111x25 cm size 1 each 1473.9516.24.2 50x152.5x25 cm size 1 each 2722.2516.24.3 35x93.5x18 cm size 1 each 991.2516.25 1 sqm 145.8016.26 1 sqm 197.3516.27 1 sqm 120.4516.2816.28.1 1 sqm 106.8016.2916.29.1 1 sqm 68.2516.3016.30.1 On W.B.M. @ 0.75 kg/ sqm 1 sqm 40.1516.30.2 On bituminous surface @ 0.50 Kg / sqm 1 sqm 29.0016.3116.31.1 With rapid setting bitumen emulsion16.31.1.1 On W.B.M / W.M.M. @ 0.4 kg/ sqm 1 sqm 14.2516.31.1.2 On bituminous surface @ 0.25 kg/ sqm 1 sqm 9.4016.31.2 With medium setting bitumen emulsion16.31.2.1 On W.B.M / W.M.M. @ 0.4 kg/ sqm 1 sqm 14.5016.31.2.2 On bituminous surface @ 0.25 kg/ sqm 1 sqm 9.5516.3216.32.1 1 sqm 135.0016.32.2 With paving Asphalt grade VG - 30 with no solvent 1 sqm 134.0016.32.3 1 sqm 136.7016.3316.33.1 1 sqm 164.7516.33.2 With paving Asphalt grade VG-30 with no solvent 1 sqm 163.5016.33.3 1 sqm 166.8516.34 1 sqm 124.1516.35 1 sqm 150.9016.3616.36.1 1 sqm 355.3016.36.2 1 sqm 505.6016.3716.37.1 25 mm thick 1 sqm 728.0516.37.2 40 mm thick 1 sqm 1164.8516.3816.38.1 1 sqm 225.6516.38.2 With paving Asphalt grade VG-30 1 sqm 223.5016.38.3 1 sqm 229.1516.3916.39.1 1 sqm 346.8516.39.2 With paving asphalt grade VG-30 with no solvent 1 sqm 343.4516.39.3 1 sqm 352.4516.40 1 sqm 61.3016.41 1 sqm 80.1516.42 1 cum 4502.5516.4316.43.1 Cement concrete prepared with batch mixing machine 1 cum 5619.5016.43.2 1 cum 5967.9016.43A 1 cum 171.7016.43B 1 cum 361.85

Providing and fixing 15x15x90 cm boundary stone of hard stone with top 30 cm chisel dressed on all four sides including Providing and fixing 15 cm dia at top, 20 cm at bottom and 90 cm high precast reinforced cement concrete 1:1.5:3 (1 cement Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate

Surface dressing on new surface with paving bitumen of grade VG -10 of approved quality using 2.25 kg of bitumen per sqm Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm with Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 kg/sqm of surface area with Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming to IS : 8887)Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area Using bitumen emulsion (minimum 50% bitumen content RS grade conforming to IS : 8887)Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen,

Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer

2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size With paving Asphalt grade VG - 10 heated and then mixed with solvent at the rate of 70 grams per kg of asphaltWith Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 532.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per With paving Asphalt grade VG -10 heated and then mixed with solvent at the rate of 70 grams per kg of asphaltWith Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53-19992 cm premix carpet surfacing with 2.4 cum of stone chippings 11.2 mm nominal size per 100 sqm and bitumen emulsion 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal size per 100 sqm and bitumen emulsion Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with For 50 mm compacted thickness using coarse aggregate of size 50-20 mm graded @ 0.60 cum per 10 sqm key aggregate For 75 mm compacted thickness in two layers using stone aggregate of size 63-41 mm graded @ 0.90 cum per 10 sqm Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/ 25

2.5 cm thick bitumastic sheet with hot bitumen of approved quality, using stone chippings (60% with 12.5 mm nominal size With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphaltWith Refinery Modified Bitumen CRMB 55 conforming to IRC: SP : 53-19994 cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings (60% with 12.5 mm nominal size With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphaltWith Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53-1999. Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixerAnnexure 'A' to Item number 16.43 Annexure 'B' to Item number 16.43

ItemNo Description Unit Rate16.44 1 litre 43.0016.45 1 2.4016.4616.46.1 Using grade 'A' sealing compound 1 1.6516.4716.47.1 New work (Two or more coats) 1 sqm 94.9016.47.2 Old work (One or more coats) 1 sqm 58.9516.4816.48.1 New work (Two or more coats) 1 sqm 95.7516.48.2 Old work (One or more coats) 1 sqm 62.1016.49 1 each 1496.4016.50 1 each 234.0016.5116.51.1 Minimum thickness 15 cm 1 cum 535.6016.52 1 cum 5211.1016.52X Sub Analysis X for sub analysis Item Number 16.52Y 1 cum 1791.8016.52Y Sub Analysis Y for Item Number 16.52 1 cum 2242.1516.53 1 metre 269.2016.5416.54.1 1 cum 8331.5516.54.2 1 cum 8095.6516.5516.55.1 1 cum 6374.2516.55.2 1 cum 6149.9016.5616.56.1 1 sqm 208.1516.56.2 1 sqm 202.2516.5716.57.1 1 cum 9077.0516.57.2 1 cum 9558.6516.57.3 1 cum 9513.5016.57.4 1 cum 9122.2016.57.5 1 cum 8836.2016.57.6 1 cum 9317.8516.57.7 1 cum 9272.7016.57.8 1 cum 8881.4016.58 Deleted.16.5916.59.1 1 each 4580.3516.59.2 1 sqm 3298.4016.6016.60.1 Overhead informatory road signage 1 sqm 4516.5016.61 1 each 5061.6516.62 1 sqm 505.8016.63 1 sqm 291.9516.64 1 sqm 97.5516.65 1 each 562.5516.6616.66.1 All kind of soil 1 each 13.8516.67 1 sqm 502.2016.68 1 sqm 536.6516.69 1 cum 5046.8016.7016.70.1 Made of G.I. wire of dia 4 mm 1 sqm 486.2016.70.2 1 sqm 519.15

Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in Providing and fixing in position pre-moulded joint filler in expansion joints.

per cm depth per Providing and laying in position bitumen hot sealing

compound for per cm depth per Painting runway/taxi track/apron marking with adequate nos

of coats to give uniform finish with road marking paint of

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint

Making bell mouth opening / entrance of size 100x50x50 cm for drainage pipe under footpath, including providing cement Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash stabilised soil with a mix of 3% lime, 12% Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime: 2 fly ash: 3 coarse sand : 6 graded stone

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @5% (percentage by weight of total mix) and 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous 40/ 50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 40/ 50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 40/ 50 mm compacted thickness with bitumen of grade PMB-40 @5.5% (percentage by weight of total mix) and lime filler 40/ 50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage by weight of total mix) and lime 40/ 50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 40/ 50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 40/50 mm compacted thickness with bitumen of grade PMB-40 @ 5.5% (percentage by weight of total mix) and lime filler 40/50 mm compacted thickness with bitumen of grade CRMB-60 @ 5.5% (percentage by weight of total mix) and lime filler Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be Mandatory / Regulatory sign boards of 900 mm diametre with support length of 3750 mmCautionary / warning sign boards of equilateral triangular shape having each side of 900 mm with support length of Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face Providing Retro-reflective regulatory sign board of size 900 mm diameter made out of 2 mm thick aluminium sheet, face Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade / colour using hot Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement : 3 coarse Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and Excavating holes upto 0.10 cum including getting out the excavated soil, then returning the soil as deported in layers Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 Made of G.I. wire of dia 4 mm, PVC coated to achieve outer dia. not less than 5 mm in required colour and shade

ItemNo Description Unit Rate16.71 1 sqm 586.2516.72 1 cum 607.5516.73 1 sqm 181.0516.7416.74.1 Moorum 1 sqm 51.9516.74.2 Stone aggregate 20 mm nominal size 1 sqm 105.3516.74.3 Stone aggregate 40 mm nominal size 1 sqm 97.3516.75 1 cum 5761.6016.76 1 cum 164.9516.77 1 sqm 2.9016.7816.78.1 1 cum 1940.8016.78.2 1 cum 1990.6516.78.3 1 cum 1975.1016.79 1 cum 1960.6016.80 1 cum 2899.2516.81 1 metre 1078.6516.81X Sub analysis item for material component of Item No. 16.81 1 metre 39.0516.81Y Sub analysis item for fabrication charges of Item No. 16.81 1 metre 607.2016.82 1 metre 10.8016.83 1 sqm 36.3516.84 1 sqm 159.2016.85 1 metre 32.1017.117.1.1 1 each 2964.1017.1.2 1 each 6309.2017.217.2.1 W.C. pan with ISI marked white solid plastic seat and lid 1 each 2885.1017.2.2 W.C. pan with ISI marked black solid plastic seat and lid 1 each 2865.3517.317.3.1 W.C. pan with ISI marked white solid plastic seat and lid 1 each 4220.8017.3.2 W.C. pan with ISI marked black solid plastic seat and lid 1 each 4201.0517.417.4.1 1 each 2844.4017.4.2 1 each 4652.8017.4.3 1 each 6229.9017.4.4 1 each 8528.7517.517.5.1 1 each 5354.5017.5.2 1 each 8445.0017.5.3 1 each 11046.8017.5.4 1 each 13541.2517.617.6.1 1 each 3529.3517.6.2 1 each 5152.4017.6.3 1 each 6826.6517.6.4 1 each 8272.0517.717.7.1 1 each 1848.3517.7.2 1 each 1628.9517.7.3 1 each 1679.9517.7.4 1 each 1460.5017.7.5 1 each 1518.6017.7.6 1 each 1315.3517.7.7 1 each 1338.55

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with:

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-30With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate Providing and erecting 2.00 metre high temporary barricading at site as per drawing/ direction of Engineer-in-Charge which

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., Laying old cement cocrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot restsStainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot restsProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and One urinal basin with 5 litre white P.V.C. automatic flushing cisternRange of two urinal basins with 5 litre white P.V.C. automatic flushing cisternRange of three urinal basins with 10 litre white P.V.C. automatic flushing cisternRange of four urinal basins with 10 litre white P.V.C. automatic flushing cisternProviding and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic Single half stall urinal with 5 litre PVC. automatic flushing cisternRange of two half stall urinals with 5 litre PVC. automatic flushing cisternRange of three half stall urinals with 10 litre PVC. automatic flushing cisternRange of four half stall urinals with 10 litre PVC. automatic flushing cisternProviding and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing Single squatting plate with 5 litre PVC. automatic flushing cisternRange of two squatting plates with 5 litre PVC. automatic flushing cisternRange of three squatting plates with 10 litre PVC. automatic flushing cisternRange of four squatting plates with 10 litre PVC automatic flushing cisternProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar tapsWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tapWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar tapsWhite Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tapWhite Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tapWhite Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tapWhite Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap

ItemNo Description Unit Rate17.7.8 1 each 3218.9517.7.9 1 each 2500.0517.7.10 1 each 2807.8517.7.11 1 each 2552.3517.8 1 each 894.7017.917.9.1 White glazed fire clay kitchen sink of size 600x450x250 mm 1 each 2206.9517.1017.10.1 Kitchen sink with drain board 17.10.1.1 510x1040 mm bowl depth 250 mm 1 each 6743.5517.10.1.2 510x1040 mm bowl depth 225 mm 1 each 6453.1517.10.1.3 510x1040 mm bowl depth 200 mm 1 each 5640.1017.10.1.4 510x1040 mm bowl depth 178 mm 1 each 4130.1517.10.2 Kitchen sink without drain board 17.10.2.1 610x510 mm bowl depth 200 mm 1 each 3934.3017.10.2.2 610x460 mm bowl depth 200 mm 1 each 3702.0017.10.2.3 470x420 mm bowl depth 178 mm 1 each 2888.9517.1117.11.1 Size 450x300x150 mm 1 each 1939.8017.11.2 Size 600x450x200 mm 1 each 2758.6517.1217.12.1 White glazed fire clay draining board of size 600x450x25 mm 1 each 896.5517.1317.13.1 Long pattern W.C. pan of size 580 mm 1 each 759.7017.13.2 Orissa pattern W.C. pan of size 580x440 mm 1 each 1235.9517.14 Extra for using coloured W.C. pan instead of white W.C. pan :17.14.1 Orissa pattern W.C. pan 580x440 mm 1 each 609.8017.15 1 each 1154.6517.16 1 each 1173.1017.1717.17.1 250x130x30 mm 1 pair 139.4517.17.2 250x125x25 mm 1 pair 151.1017.1817.18.1 10 litre capacity - White 1 each 831.9017.18.2 10 litre capacity - coloured 1 each 887.3517.1917.19.1 10 litre (full flush) capacity-white 1 each 1474.1017.19.2 10 litre (full flush) capacity-coloured 1 each 1967.7517.2017.20.1 White solid plastic seat with lid 1 each 383.2517.20.2 Black solid plastic seat with lid 1 each 363.5017.20.3 Cloured (other than black & white ) solid plastic seat with lid 1 each 574.9017.22 1 each 94.0017.23 1 each 792.6017.24 1 each 1537.8517.2517.25.1 Flat back wash basin of size 630x450 mm 1 each 893.5517.25.2 Flat back wash basin of size 550x400 mm 1 each 725.1517.25.3 Angle back wash basin of size 600x480 mm 1 each 783.2517.25.4 Angle back wash basin of size 400x400 mm 1 each 579.9517.25.5 Flat back wash basin of size 450x300 mm 1 each 603.2017.25.6 Surgeon type wash basin of size 660x460 mm 1 each 1265.2517.2617.26.1 White glazed fire clay sink of size 600x450x250 mm 1 each 1656.6517.27

White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm CP. brass pillar taps with Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tapStainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tapProviding and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P

Providing and fixing draining board with C.I. brackets including painting of brackets, cutting and making good the walls Providing and fixing white vitreous china water closet squatting pan (Indian type) :

Providing and fixing white vitreous china pedestal type (European type / wash down type) water closet pan.Extra for using coloured pedestal type WC pan (European type) with low level cistern of same colour instead of white Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS :

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:

Providing and fixing kitchen sink including making all connections excluding cost of fittings. Providing and fixing white vitreous china laboratory sink including making all connections excluding cost of fittings:

ItemNo Description Unit Rate17.27.1 Size 450x300x150 mm 1 each 1041.0517.27.2 Size 600x450x200 mm 1 each 1859.9517.2817.28.1 Semi rigid pipe 17.28.1.1 32 mm dia 1 each 59.5017.28.1.2 40 mm dia 1 each 66.4517.28.2 Flexible pipe 17.28.2.1 32 mm dia 1 each 65.3017.28.2.2 40 mm dia 1 each 67.6017.29 1 each 24.6017.30 1 each 34.5017.31 1 each 674.0517.3217.32.1 Circular shape 450 mm dia 1 each 731.3017.32.2 Rectangular shape 453x357 mm 1 each 598.3017.32.3 Oval shape 450x350 mm (outer dimensions) 1 each 642.8017.32.4 Rectangular shape 1500x450 mm 1 each 1211.0017.33 1 each 341.2517.34 Providing and fixing toilet paper holder: 17.34.1 C.P. brass 1 each 250.9517.34.2 Vitreous china 1 each 259.7517.35 Providing and fixing soil, waste and vent pipes: 17.35.1 100 mm dia17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 1 metre 734.3017.35.1.2 1 metre 857.3017.35.2 75 mm diameter17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 1 metre 656.6017.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 1 metre 744.5017.3617.36.1 75 mm dia pipe 1 each 47.5517.36.2 100 mm dia pipe 1 each 56.0017.3717.37.1 For 100 mm dia pipe 1 each 112.5017.37.2 For 75 mm dia pipe 1 each 110.1517.3817.38.1 100 mm dia17.38.1.1 Sand cast iron S&S as per IS - 1729 1 each 310.3017.38.1.2 Sand cast iron S&S as per IS - 3989 1 each 353.2517.38.2 75 mm dia17.38.2.1 Sand cast iron S&S as per IS - 1729 1 each 248.6517.38.2.2 Sand cast iron S&S as per IS- 3989 1 each 281.1517.39 Providing and fixing plain bend of required degree. 17.39.1 100 mm dia17.39.1.1 Sand cast iron S&S as per IS - 1729 1 each 267.3017.39.1.2 Sand cast iron S&S as per IS : 3989 1 each 296.3517.39.2 75 mm dia17.39.2.1 Sand cast iron S&S as per IS -1729 1 each 216.1517.39.2.2 Sand cast iron S&S as per IS - 3989 1 each 221.9517.40 Providing and fixing heel rest sanitary bend. 17.40.1 100 mm dia17.40.1.1 Sand cast iron S&S as per IS - 1729 1 each 301.0017.40.1.2 Sand cast iron S&S as per IS - 3989 1 each 342.8017.40.2 75 mm dia17.40.2.1 Sand cast iron S&S as per IS - 1729 1 each 251.0017.40.2.2 Sand cast iron S&S as per IS - 3989 1 each 297.45

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.

Providing and fixing 100 mm sand cast Iron grating for gully trap.Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded

Providing and fixing 600x120x5 mm glass shelf with edges round off supported on anodised aluminium angle frame with

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I. / C.I.

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast Iron / Cast Iron (spun) pipe embedded in

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts

ItemNo Description Unit Rate17.4117.41.1 100x100x100x100 mm 17.41.1.1 Sand cast iron S&S as per IS - 1729 1 each 655.0517.41.1.2 Sand cast iron S&S as per IS - 3989 1 each 747.9517.41.2 75x75x75x75 mm17.41.2.1 Sand cast iron S&S as per IS - 1729 1 each 490.2517.41.2.2 Sand cast iron S&S as per IS - 3989 1 each 583.1517.4217.42.1 100x100x100x100 mm17.42.1.1 Sand cast iron S&S as per IS - 1729 1 each 592.5517.42.1.2 Sand cast iron S&S as per IS - 3989 1 each 679.6517.42.2 75x75x75x75 mm17.42.2.1 Sand cast iron S&S as per IS - 1729 1 each 407.8017.42.2.2 Sand cast iron S&S as per IS - 3989 1 each 541.3517.4317.43.1 100x100x100 mm17.43.1.1 Sand cast iron S&S as per IS - 1729 1 each 446.2017.43.1.2 Sand cast iron S&S as per IS - 3989 1 each 579.7517.43.2 75x75x75 mm17.43.2.1 Sand cast iron S&S as per IS - 1729 1 each 333.4517.43.2.2 Sand cast iron S&S as per IS - 3989 1 each 438.0017.4417.44.1 100x100x100 mm17.44.1.1 Sand cast iron S&S as per IS - 1729 1 each 383.4517.44.1.2 Sand cast iron S&S as per IS - 3989 1 each 522.8517.44.2 75x75x75 mm17.44.2.1 Sand cast iron S&S as per IS - 1729 1 each 297.4517.44.2.2 Sand cast iron S&S as per IS - 3989 1 each 378.7517.4517.45.1 100x100x75x75 mm17.45.1.1 Sand cast iron S&S as per IS - 1729 1 each 678.5017.45.1.2 Sand cast iron S&S as per IS - 3989 1 each 1026.9517.4617.46.1 100x100x75x75 mm17.46.1.1 Sand cast iron S&S as per IS - 1729 1 each 615.7517.46.1.2 Sand cast iron S&S as per IS - 3989 1 each 929.3517.4717.47.1 100x100x75 mm17.47.1.1 Sand cast iron S&S as per IS - 1729 1 each 492.6517.47.1.2 Sand cast iron S&S as per IS - 3989 1 each 771.4017.4817.48.1 100x100x75 mm17.48.1.1 Sand cast iron S&S as per IS - 1729 1 each 429.9017.48.1.2 Sand cast iron S&S as per IS - 3989 1 each 673.8517.4917.49.1 100x100x100x100 mm17.49.1.1 Sand cast iron S&S as per IS - 1729 1 each 615.7517.49.1.2 Sand cast iron S&S as per IS 3989 1 each 633.2017.49.2 75x75x75x75 mm 17.49.2.1 Sand cast iron S&S as per IS - 1729 1 each 462.3517.49.2.2 Sand cast iron S&S as per IS - 3989 1 each 489.1017.5017.50.1 100x100x100 mm17.50.1.1 Sand cast iron S&S as per IS - 1729 1 each 472.9017.50.1.2 Sand cast iron S&S as per IS - 3989 1 each 482.20

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts

Providing and fixing double equal plain junction of required degree.

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick,

Providing and fixing single equal plain junction of required degree:

Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick,

Providing and fixing double unequal plain junction of required degree:

Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3 mm thick,

Providing and fixing single unequal plain junction of required degree:

Providing and fixing double equal plain invert branch of required degree:

Providing and fixing single equal plain invert branch of required degree:

ItemNo Description Unit Rate17.50.2 75x75x75 mm17.50.2.1 Sand cast iron S&S as per IS - 1729 1 each 355.5017.50.2.2 Sand cast iron S&S as per IS - 3989 1 each 370.6017.5117.51.1 100x100x75x75 mm17.51.1.1 Sand cast iron S&S as per IS - 1729 1 each 656.4017.51.1.2 Sand cast iron S&S as per IS - 3989 1 each 836.4517.5217.52.1 100x100x75 mm17.52.1.1 Sand cast iron S&S as per IS - 1729 1 each 564.6517.52.1.2 Sand cast iron S&S as per IS - 3989 1 each 609.9517.53 Providing and fixing sand cast iron S&S off sets as per IS: 1729 17.53.1 76 mm off sets17.53.1.1 With 75 mm dia pipe 1 each 268.4017.53.1.2 With 100 mm dia pipe 1 each 304.4017.53.2 114 mm off sets17.53.2.1 With 75 mm dia pipe 1 each 337.0017.53.2.2 With 100 mm dia pipe 1 each 435.7017.53.3 152 mm off sets17.53.3.1 With 75 mm dia pipe 1 each 420.1517.53.3.2 wifh 100 mm dia pipe 1 each 542.1017.5417.54.1 75 mm off sets17.54.1.1 With 75 mm dia pipe 1 each 268.4017.54.2 150 mm off sets17.54.2.1 With 75 mm dia pipe 1 each 341.5017.54.2.2 With 100 mm dia pipe 1 each 457.6517.5517.55.1 100 mm17.55.1.1 Sand cast iron S&S as per IS - 1729 1 each 446.2017.55.1.2 Sand cast iron S&S as per IS - 3989 1 each 469.4017.55.2 75 mm17.55.2.1 Sand cast iron S&S as per IS - 1729 1 each 325.3017.55.2.2 Sand cast iron S&S as per IS - 3989 1 each 333.4517.56 Providing and fixing terminal guard: 17.56.1 100 mm17.56.1.1 Sand cast iron S&S as per IS - 1729 1 each 240.6017.56.1.2 Sand cast iron S&S as per IS - 3989 1 each 244.1017.56.2 75 mm17.56.2.1 Sand cast iron S&S as per IS - 1729 1 each 177.8017.56.2.2 Sand cast iron S&S as per IS - 3989 1 each 221.9517.57 Providing and fixing collar: 17.57.1 100 mm17.57.1.1 Sand cast iron S&S as per IS - 1729 1 each 177.8517.57.1.2 Sand cast iron S&S as per IS - 3989 1 each 238.2517.57.2 75 mm17.57.2.1 Sand cast iron S&S as per IS - 1729 1 each 132.5017.57.2.2 Sand cast iron S&S as per IS- 3989 1 each 169.6517.5817.58.1 100 mm 1 each 207.8517.58.2 75 mm 1 each 176.5017.58.3 50 mm 1 each 141.6517.5917.59.1 100 mm 1 each 61.7017.59.2 75 mm 1 each 52.35

Providing and fixing double unequal invert branch of required degree:

Providing and fixing single unequal plain invert branch of required degree:

Providing and fixing sand cast iron S&S off sets as per IS: 3989 :

Providing and fixing door piece, insertion rubber washer 3 mm thick, bolts & nuts complete:

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter:

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter:

ItemNo Description Unit Rate17.59.3 50 mm 1 each 45.4517.6017.60.1 100 mm inlet and 100 mm outlet17.60.1.1 Sand cast iron S&S as per IS: 3989 1 each 801.7017.60.1.2 Sand Cast Iron S&S as per IS: 1729 1 each 651.8517.60.2 100 mm inlet and 75 mm outlet17.60.2.1 Sand cast iron S&S as per IS - 3989 1 each 838.8517.60.2.2 Sand Cast Iron S&S as per IS- 1729 1 each 576.3517.6117.61.1 100 mm dia 1 metre 256.8517.61.2 75 mm dia 1 metre 183.6517.61.3 50 mm dia 1 metre 116.6017.62 1 each 338.1017.63 1 each 237.3517.64 1 each 100.6017.6517.65.1 100 mm diameter pipe 1 metre 28.7517.65.2 75 mm diameter pipe 1 metre 22.0017.6617.66.1 100 mm diameter pipe 1 metre 14.3017.66.2 75 mm diameter pipe 1 metre 10.7017.67 1 each 293.3517.6817.68.1 1 each 5744.3017.6917.69.1 1 each 94.3517.69.2 1 each 109.4517.7017.70.1 1 each 403.3017.70.2 1 each 435.8017.71 1 each 180.1017.72 1 each 169.8517.7317.73.1 1 each 375.7017.73.2 1 each 415.2017.74 1 each 452.3517.75 1 each 159.2017.7617.76.1 1 each 123.1517.7717.77.1 1 each 168.0017.77.2 1 each 205.5017.77.3 1 each 242.9017.78 1 each 9444.4017.79 1 each 19195.1517.80 1 each 14961.6518.118.1.1 1216 (16 mm OD) pipe 1 metre 187.7518.1.2 1620 (20 mm OD) pipe 1 metre 224.5518.1.3 2025 (25 mm OD) pipe 1 metre 277.9518.1.4 2532 (32 mm OD) pipe 1 metre 362.8518.1.5 3240 (40 mm OD) pipe 1 metre 559.6518.1.6 4050 (50 mm OD) pipe 1 metre 597.4018.218.2.1 1216 (16 mm OD) pipe 1 metre 298.85

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete,

Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making

Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint over a coat of zinc Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and white paint on the outside surface Repainting C.I. cistern with synthetic enamel paint of approved colour, brand and manufacture on the outside Painting sand cast iron / centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic

Repainting sand cast iron / centrifugally cast iron (spun) iron, soil, waste, vent pipes and fittings with one coat of synthetic

Repainting bath tub of size 1700x730x430 mm with enamel paint.Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gmsWaste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88mm, weighing not less than 190 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gmsProviding and fixing M.S. holder bat clamp of approved design to sand cast iron / cast iron (spun) pipes comprising of M.S. Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)Total bracket length 810 mm of approved shape and design (for two 100 mm dia pipes)Total bracket length 1040 mm of approved shape and design (for three 100 mm dia pipes)Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS -

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS -

ItemNo Description Unit Rate18.2.2 1620 (20 mm OD) pipe 1 metre 341.5018.2.3 2025 (25 mm OD) pipe 1 metre 406.5518.2.4 2532 (32 mm OD) pipe 1 metre 508.2018.318.3.1 1216 (16 mm OD) pipe 1 metre 181.1518.3.2 1620 (20 mm OD) pipe 1 metre 212.8518.3.3 2025 (25mm OD) pipe 1 metre 261.2018.3.4 2532 (32 mm OD ) pipe 1 metre 336.7018.3.5 3240 (40 mm OD) pipe 1 metre 521.0018.3.6 4050 (50 mm OD) pipe 1 metre 558.7518.418.4.1 PN - 16 Pipe, 16 mm OD 1 metre 100.2018.4.2 PN - 16 Pipe, 20 mm OD 1 metre 132.4518.4.3 PN - 16 Pipe, 25 mm OD 1 metre 176.8018.4.4 PN - 16 Pipe, 32 mm OD 1 metre 258.7018.4.5 PN - 16 Pipe, 40 mm OD 1 metre 387.5518.4.6 PN - 16 Pipe, 50 mm OD 1 metre 523.4518.518.5.1 PN - 16 Pipe, 16 mm OD 1 metre 180.9518.5.2 PN - 16 Pipe, 20 mm OD 1 metre 217.5518.5.3 PN - 16 Pipe, 25 mm OD 1 metre 270.4018.5.4 PN -16 Pipe, 32 mm OD 1 metre 367.9518.618.6.1 PN - 16 Pipe, 16 mm OD (SDR -7.4) 1 metre 93.6018.6.2 PN - 16 Pipe, 20 mm OD (SDR -7.4) 1 metre 120.7518.6.3 PN - 16 Pipe, 25 mm OD (SDR -7.4) 1 metre 164.0018.6.4 PN - 16 Pipe, 32 mm OD (SDR -7.4) 1 metre 236.4518.6.5 PN - 16 Pipe, 40 mm OD (SDR -7.4) 1 metre 348.9018.6.6 PN - 16 Pipe, 50 mm OD (SDR -7.4) 1 metre 484.8018.6.7 PN - 16 Pipe, 63 mm OD (SDR -7.4) 1 metre 737.4518.6.8 PN - 16 Pipe, 75 mm OD (SDR -7.4) 1 metre 1031.9018.6.9 PN - 16 Pipe, 90 mm OD (SDR -7.4) 1 metre 1626.8018.6.10 PN - 10 Pipe, 110 mm OD (SDR -11) 1 metre 1702.3018.6.11 PN - 10 Pipe, 160 mm OD (SDR -11) 1 metre 3538.2518.718.7.1 15 mm nominal outer dia pipes 1 metre 133.9518.7.2 20 mm nominal outer dia pipes 1 metre 157.1518.7.3 25 mm nominal outer dia pipes 1 metre 197.9018.7.4 32 mm nominal outer dia pipes 1 metre 252.6518.7.5 40 mm nominal outer dia pipes 1 metre 348.2518.7.6 50 mm nominal outer dia pipes 1 metre 514.3518.818.8.1 15 mm nominal outer dia pipes 1 metre 219.5518.8.2 20 mm nominal outer dia pipes 1 metre 243.9518.8.3 25 mm nominal outer dia pipes 1 metre 298.8518.8.4 32 mm nominal outer dia pipes 1 metre 359.8018.918.9.1 15 mm nominal outer dia pipes 1 metre 122.2518.9.2 20 mm nominal outer dia pipes 1 metre 140.4018.9.3 25 mm nominal outer dia pipes 1 metre 185.1518.9.4 32 mm nominal outer dia pipes 1 metre 230.4518.9.5 40 mm nominal outer dia pipes 1 metre 309.6018.9.6 50 mm nominal outer dia pipes 1 metre 475.7018.9.7 62.50 mm nominal inner dia pipes 1 metre 1326.3518.9.8 75 mm nominal inner dia pipes 1 metre 1854.85

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS -

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4, U V stabilized & anti - microbial

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4, U V stabilized & anti - microbial

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes U V stabilized & anti - microbial fusion

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply

ItemNo Description Unit Rate18.9.9 100 mm nominal inner dia pipes 1 metre 2563.0018.9.10 150 mm nominal inner dia pipes 1 metre 4466.8518.1018.10.1 15 mm dia nominal bore 1 metre 161.6018.10.2 20 mm dia nominal bore 1 metre 188.0518.10.3 25 mm dia nominal bore 1 metre 243.1518.10.4 32 mm dia nominal bore 1 metre 296.5018.10.5 40 mm dia nominal bore 1 metre 364.1018.10.6 50 mm dia nominal bore 1 metre 453.6518.1118.11.1 15 mm dia nominal bore 1 metre 230.0018.11.2 20 mm dia nominal bore 1 metre 252.2018.1218.12.1 15 mm dia nominal bore 1 metre 142.2518.12.2 20 mm dia nominal bore 1 metre 161.2518.12.3 25 mm dia nominal bore 1 metre 209.4018.12.4 32 mm dia nominal bore 1 metre 248.5518.12.5 40 mm dia nominal bore 1 metre 294.2018.12.6 50 mm dia nominal bore 1 metre 355.9518.12.7 65 mm dia nominal bore 1 metre 453.5518.12.8 80 mm dia nominal bore 1 metre 573.4018.1318.13.1 25 to 40 mm nominal bore 1 each 277.3518.13.2 50 to 80 mm nominal bore 1 each 630.1518.14 1 each 228.5518.15 Providing and fixing brass bib cock of approved quality: 18.15.1 15 mm nominal bore 1 each 205.6018.15.2 20 mm nominal bore 1 each 266.1518.16 Providing and fixing brass stop cock of approved quality: 18.16.1 15 mm nominal bore 1 each 205.6018.16.2 20 mm nominal bore 1 each 266.1518.1718.17.1 25 mm nominal bore 1 each 372.9518.17.2 32 mm nominal bore 1 each 450.9018.17.3 40 mm nominal bore 1 each 546.0518.17.4 50 mm nominal bore 1 each 780.6018.17.5 65 mm nominal bore 1 each 1073.2518.17.6 80 mm nominal bore 1 each 1832.9518.1818.18.1 15 mm nominal bore 1 each 258.0518.18.2 20 mm nominal bore 1 each 360.2018.18.3 25 mm nominal bore 1 each 421.6518.1918.19.1 25 mm nominal bore18.19.1.1 Horizontal 1 each 383.4518.19.1.2 Vertical 1 each 395.0518.19.2 32 mm nominal bore18.19.2.1 Horizontal 1 each 490.2518.19.2.2 Vertical 1 each 594.8018.19.3 40 mm nominal bore18.19.3.1 Horizontal 1 each 620.2518.19.3.2 Vertical 1 each 817.7018.19.4 50 mm nominal bore18.19.4.1 Horizontal 1 each 936.3518.19.4.2 Vertical 1 each 1110.55

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.

Providing & Fixing GI pipes complete with GI fittings and clamps including making good the walls etc. concealed pipe

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting

Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:

Providing and fixing gun metal non-return valve of approved quality (screwed end) :

ItemNo Description Unit Rate18.19.5 65 mm nominal bore18.19.5.1 Horizontal 1 each 1681.9518.19.5.2 Vertical 1 each 1949.1018.19.6 80 mm nominal bore18.19.6.1 Horizontal 1 each 2392.9518.19.6.2 Vertical 1 each 3089.8518.2018.20.1 15 mm nominal bore 1 each 203.3018.20.2 20 mm nominal bore 1 each 250.1018.20.3 25 mm nominal bore 1 each 331.2518.2118.21.1 30 cm length18.21.1.1 15 mm nominal bore 1 each 51.3518.21.1.2 20 mm nominal bore 1 each 59.5018.21.2 45 cm length18.21.2.1 15 mm nominal bore 1 each 61.7018.21.2.2 20 mm nominal bore 1 each 73.3518.2218.22.1 100 mm diameter 1 each 58.1518.22.2 150 mm diameter 1 each 77.8518.23 1 quintal 101.7018.24 1 quintal 186.1018.2518.25.1 Upto 300 mm dia 1 quintal 4202.3518.25.2 Over 300 mm dia 1 quintal 4318.5018.2618.26.1 Upto 300 mm dia 1 quintal 6351.1018.26.2 Over 300 mm dia 1 quintal 6699.5518.2718.27.1 100 mm dia pipe 1 metre 986.4018.27.2 125 mm dia pipe 1 metre 1237.1518.27.3 150 mm dia pipe 1 metre 1476.7018.27.4 200 mm dia pipe 1 metre 2516.3018.27.5 250 mm dia pipe 1 metre 3360.2018.27.6 300 mm dia pipe 1 metre 4437.8018.27.7 350 mm dia pipe 1 metre 5346.4518.27.8 400 mm dia pipe 1 metre 6965.8518.27.9 450 mm dia pipe 1 metre 8425.2518.27.10 500 mm dia pipe 1 metre 9787.2018.27.11 600 mm dia pipe 1 metre 13576.2518.2818.28.1 100 mm diameter pipe 1 each 150.0018.28.2 125 mm diameter pipe 1 each 220.6518.28.3 150 mm diameter pipe 1 each 225.1018.28.4 200 mm diameter pipe 1 each 298.6518.28.5 250 mm diameter pipe 1 each 372.7018.28.6 300 mm diameter pipe 1 each 448.7518.28.7 350 mm diameter pipe 1 each 463.8518.28.8 400 mm diameter pipe 1 each 604.3518.28.9 450 mm diameter pipe 1 each 676.8518.28.10 500 mm diameter pipe 1 each 716.7518.28.11 600 mm diameter pipe 1 each 965.3518.29 Supplying pig lead at site of work. 1 quintal 10462.5518.3018.30.1 80 mm diameter pipe 1 each 92.65

Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main:

Providing and fixing uplasticised PVC connection pipe with brass unions:

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:

Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe) Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials). Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) :

Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :

Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig

Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints:

ItemNo Description Unit Rate18.30.2 100 mm diameter pipe 1 each 155.2518.30.3 125 mm diameter pipe 1 each 165.7018.30.4 150 mm diameter pipe 1 each 192.8018.30.5 200 mm diameter pipe 1 each 198.6518.30.6 250 mm diameter pipe 1 each 297.2018.30.7 300 mm diameter pipe 1 each 306.5018.30.8 350 mm diameter pipe 1 each 408.3018.30.9 400 mm diameter pipe 1 each 657.3518.30.10 450 mm diameter pipe 1 each 814.9518.30.11 500 mm diameter pipe 1 each 893.1518.30.12 600 mm diameter pipe 1 each 1059.1518.3118.31.1 100 mm diameter18.31.1.1 Class I 1 each 3068.3518.31.1.2 Class II 1 each 3498.3018.31.2 125 mm diameter18.31.2.1 Class I 1 each 3461.1518.31.2.2 Class II 1 each 4181.4518.31.3 150 mm diameter18.31.3.1 Class I 1 each 4487.7518.31.3.2 Class II 1 each 5200.4018.31.4 200 mm diameter18.31.4.1 Class I 1 each 8242.2518.31.4.2 Class II 1 each 11260.6018.31.5 250 mm diameter18.31.5.1 Class I 1 each 12037.8018.31.5.2 Class II 1 each 16723.3018.31.6 300 mm diameter18.31.6.1 Class I 1 each 16766.2518.31.6.2 Class II 1 each 20950.6018.3218.32.1 1 each 884.7018.3318.33.1 1 each 5251.8018.3418.34.1 1 each 9021.3018.3518.35.1 1 each 12492.7018.3618.36.1 1 each 4979.8018.3718.37.1 1 each 4791.2518.3818.38.1 15 mm diameter pipe 1 metre 7.3518.38.2 20 mm diameter pipe 1 metre 8.6518.38.3 25 mm diameter pipe 1 metre 11.4018.38.4 32 mm diameter pipe 1 metre 13.4518.38.5 40 mm diameter pipe 1 metre 16.0018.38.6 50 mm diameter pipe 1 metre 18.8018.3918.39.1 15 mm diameter pipe 1 metre 3.7518.39.2 20 mm diameter pipe 1 metre 4.3518.39.3 25 mm diameter pipe 1 metre 5.6018.39.4 32 mm diameter pipe 1 metre 6.6018.39.5 40 mm diameter pipe 1 metre 7.70

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required

Constructing masonry chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Constructing masonry chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of

Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality:

ItemNo Description Unit Rate18.39.6 50 mm diameter pipe 1 metre 9.0018.4018.40.1 15 mm diameter pipe 1 metre 4.4018.40.2 20 mm diameter pipe 1 metre 5.1518.40.3 25 mm diameter pipe 1 metre 6.6018.40.4 32 mm diameter pipe 1 metre 7.8018.40.5 40 mm diameter pipe 1 metre 8.9018.40.6 50 mm diameter pipe 1 metre 10.5518.40.7 65 mm diameter pipe 1 metre 12.9518.40.8 80 mm diameter pipe 1 metre 15.0018.4118.41.1 15 mm diameter pipe 1 metre 54.7518.41.1A Sub analysis item for sand filling component 1 cum 739.9018.41.2 20 mm diameter pipe 1 metre 55.5018.41.3 25 mm diameter pipe 1 metre 56.9518.41.4 32 mm diameter pipe 1 metre 58.4518.41.5 40 mm diameter pipe 1 metre 59.2018.41.6 50 mm diameter pipe 1 metre 61.4018.41.7 65 mm diameter pipe 1 metre 96.9518.41.8 80 mm diameter pipe 1 metre 99.9018.41.9 100 mm diameter pipe 1 metre 105.8018.41.10 150 mm diameter pipe 1 metre 157.6018.4218.42.1 Upto 6 metres depth 1 metre 259.2518.42.2 Beyond 6 m and upto 12 m depth 1 metre 308.2018.42.3 Beyond 12 m and upto 18 m depth 1 metre 359.1518.43 1 metre 479.2518.44 1 metre 275.1518.45 1 each 733.5518.4618.46.1 15 mm nominal bore 1 each 119.6018.46.2 20 mm nominal bore 1 each 142.8518.46.3 25 mm nominal bore 1 each 154.4518.46.4 32 mm nominal bore 1 each 189.3018.46.5 40 mm nominal bore 1 each 229.9518.46.6 50 mm nominal bore 1 each 307.7018.46.7 65 mm nominal bore 1 each 551.6018.46.8 80 mm nominal bore 1 each 656.1518.4718.47.1 15 mm nominal bore 1 each 259.6518.47.2 20 mm nominal bore 1 each 282.9018.47.3 25 mm nominal bore 1 each 294.5018.47.4 32 mm nominal bore 1 each 329.3518.47.5 40 mm nominal bore 1 each 370.0018.47.6 50 mm nominal bore 1 each 498.6518.47.7 65 mm nominal bore 1 each 742.5518.47.8 80 mm nominal bore 1 each 847.1018.48 1 per litre 6.1018.4918.49.1 15 mm nominal bore 1 each 397.5018.5018.50.1 15 mm nominal bore 1 each 411.4018.5118.51.1 15 mm nominal bore 1 each 430.6018.52

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

Providing and filling sand of grading zone V or coarser grade, all- round the G.I. pipes in external work.

Boring with 100 mm diameter casing pipe for hand pump / tube well in all soils except ordinary hard rocks requiring

Providing and placing in position filters of 40 mm diameter G.I. pipe with brass strainer of approved quality.Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube well including cleaning and priming the Providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931.Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

ItemNo Description Unit Rate18.52.1 15 mm nominal bore 1 each 426.5518.5318.53.1 15 mm nominal bore 1 each 449.3518.5418.54.1 1 each 130.1018.54.2 1 each 176.5518.54.3 1 each 199.8018.54.4 1 each 168.4518.5518.55.1 1 each 130.1018.55.2 1 each 164.9518.55.3 1 each 214.9018.5618.56.1 1 each 202.2518.56.2 1 each 277.7518.5718.57.1 1 each 118.5018.57.2 1 each 106.8518.5818.58.1 Circular type18.58.1.1 100 mm nominal dia 1 each 43.2018.58.1.2 125 mm nominal dia with 25 mm waste hole 1 each 50.1518.58.2 Rectangular type with openable circular lid18.58.2.1 1 each 124.5018.5918.59.1 50 mm dia 1 each 4018.1518.59.2 80 mm dia 1 each 5830.1018.59.3 100 mm dia 1 each 7602.3518.6018.60.1 80 mm dia nominal bore 1 each 2880.6018.60.2 100 mm dia nominal bore 1 each 4329.2018.60.3 150 mm dia nominal bore 1 each 6132.0018.60.4 200 mm dia nominal bore 1 each 6860.9018.6118.61.1 80 mm dia 1 each 3340.9018.61.2 100 mm dia. 1 each 5300.5518.61.3 150 mm dia 1 each 6860.9018.61.4 200 mm dia 1 each 9436.6018.6218.62.1 1 each 193.0018.62.2 1 each 273.0518.62.3 1 each 543.6518.62.4 1 each 961.7518.62.5 1 each 1391.5018.63 1 each 164.9518.64 1 each 112.7518.65 1 each 151.1018.6618.66.1 Upto 300 mm dia 1 quintal 6989.9518.66.2 Above 300 mm dia 1 quintal 8906.4018.6718.67.1 Upto 300 mm dia 1 quintal 9719.4518.67.2 Above 300 mm dia 1 quintal 10509.2518.6818.68.1 Upto 600 mm dia 1 quintal 13958.95

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms15 mm nominal bore, 122 mm long, weighing not less than 99 gms15 mm nominal bore, 165 mm long, weighing not less than 110 gms15 mm nominal bore, 90 mm long, weighing not less than 93 gmsProviding and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms20 mm nominal bore, 89 mm long, weighing not less than 88 gmsConcealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gmsProviding and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gmsProviding and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms15 mm nominal bore, 80 mm long, weighing not less than 46 gmsProviding and fixing PTMT grating of approved quality and colour.

150 mm nominal size square 100 mm diameter of the inner hinged round gratingProviding and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board

Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod 15 mm nominal bore, 105 mm long, weighing not less than 138 gms20 mm nominal bore, 120 mm long, weighing not less than 198 gms25 mm nominal bore, 152 mm long, weighing not less than 440 gms40 mm nominal bore, 206 mm long, weighing not less than 690 gms50 mm nominal bore, 242 mm long, weighing not less than 1240 gmsProviding and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms.Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms.Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed Providing and laying S&S. C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing

Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382:

Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per IS : 9523:

ItemNo Description Unit Rate18.68.2 Above 600 mm dia 1 quintal 19104.4018.6918.69.1 Upto 600 mm dia 1 quintal 14760.3518.69.2 Above 600 mm dia 1 quintal 20614.3018.7018.70.1 100 mm dia pipes 1 joint 49.2518.70.2 150 mm dia pipes 1 joint 79.0518.70.3 200 mm dia pipes 1 joint 121.6518.70.4 250 mm dia pipes 1 joint 146.8018.70.5 300 mm dia pipe 1 joint 194.0518.70.6 350 mm dia pipes 1 joint 221.9518.70.7 400 mm dia pipes 1 joint 371.0518.70.8 450 mm dia pipes 1 joint 413.6518.70.9 500 mm dia pipes 1 joint 448.8518.70.10 600 mm dia pipes 1 joint 570.1018.70.11 650 mm dia pipes 1 joint 820.5518.70.12 700 mm dia pipes 1 joint 929.7518.70.13 800 mm di a pipes 1 joint 1005.3518.70.14 900 mm dia pipes 1 joint 1310.8518.70.15 1000 mm dia pipes 1 joint 1594.7018.7118.71.1 100 mm dia C.I. Double Flanged Pipe 1 metre 1493.1518.71.2 150 mm dia C.I. Double Flanged Pipe 1 metre 2325.2018.71.3 200 mm dia C.I. Double Flanged Pipe 1 metre 3752.6518.71.4 250 mm dia C.I. Double Flanged Pipe 1 metre 4427.8018.71.5 300 mm dia C.I. Double Flanged Pipe 1 metre 5662.8018.71.6 350 mm dia C.I. Double Flanged Pipe 1 metre 7214.8518.71.7 400 mm dia C.I. Double Flanged Pipe 1 metre 9354.1018.71.8 450 mm dia C.I. Double Flanged Pipe 1 metre 11775.0518.71.9 500 mm dia C.I. Double Flanged Pipe 1 metre 14654.5018.71.10 600 mm dia C.I. Double Flanged Pipe 1 metre 18163.6018.7218.72.1 100 mm dia Ductile Iron Class K-7 pipes 1 metre 840.2518.72.2 150 mm dia Ductile Iron Class K-7 pipes 1 metre 1229.0518.72.3 200 mm dia Ductile Iron Class K-7 pipes 1 metre 1680.1518.72.4 250 mm dia Ductile Iron Class K-7 pipes 1 metre 2278.6018.72.5 300 mm dia Ductile Iron Class K-7 pipes 1 metre 3123.8518.72.6 350 mm dia Ductile Iron Class K-7 pipes 1 metre 3723.2518.72.7 400 mm dia Ductile Iron Class K-7 pipes 1 metre 4413.6518.72.8 450 mm dia Ductile Iron Class K-7 pipes 1 metre 5241.0518.72.9 500 mm dia Ductile Iron Class K-7 pipes 1 metre 6189.2018.72.10 600 mm dia Ductile Iron Class K-7 pipes 1 metre 8077.4018.72.11 700 mm dia Ductile Iron Class K-7 pipes 1 metre 10379.5018.72.12 800 mm dia Ductile Iron Class K-7 pipes 1 metre 13242.4018.72.13 900 mm dia Ductile Iron Class K-7 pipes 1 metre 17320.7518.72.14 1000 mm dia Ductile Iron Class K-7 pipes 1 metre 18414.1018.72.15 100 mm dia Ductile Iron Class K-9 pipes 1 metre 946.0018.72.16 150 mm dia Ductile Iron Class K-9 pipes 1 metre 1389.4018.72.17 200 mm dia Ductile Iron Class K-9 pipes 1 metre 1895.4018.72.18 250 mm dia Ductile Iron Class K-9 pipes 1 metre 2502.3518.72.19 300 mm dia Ductile Iron Class K-9 pipes 1 metre 3184.9518.72.20 350 mm dia Ductile Iron Class K-9 pipes 1 metre 3841.7518.72.21 400 mm dia Ductile Iron Class K-9 pipes 1 metre 5169.1518.72.22 450 mm dia Ductile Iron Class K-9 pipes 1 metre 6043.8018.72.23 500 mm dia Ductile Iron Class K-9 pipes 1 metre 7334.45

Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and

Providing and laying Double Flanged (screwed / welded) Centrifugally (Spun) Cast Iron, Class B (IS : 1536) :

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 :

ItemNo Description Unit Rate18.72.24 600 mm dia Ductile Iron Class K-9 pipes 1 metre 8838.5518.72.25 700 mm dia Ductile Iron Class K-9 pipes 1 metre 11919.0018.72.26 750 mm dia Ductile Iron Class K-9 pipes 1 metre 13485.3518.72.27 800 mm dia Ductile Iron Class K-9 pipes 1 metre 14272.1518.72.28 900 mm dia Ductile Iron Class K-9 pipes 1 metre 16696.7018.72.29 1000 mm dia Ductile Iron Class K-9 pipes 1 metre 18754.4018.7318.73.1 100 mm dia Ductile Iron Double Flanged 1 metre 2376.4518.73.2 150 mm dia Ductile Iron Double Flanged 1 metre 3318.1018.73.3 200 mm dia Ductile Iron Double Flanged 1 metre 4395.0018.73.4 250 mm dia Ductile Iron Double Flanged 1 metre 5801.0018.73.5 300 mm dia Ductile Iron Double Flanged 1 metre 7440.6018.73.6 350 mm dia Ductile Iron Double Flanged 1 metre 9423.0018.73.7 400 mm dia Ductile Iron Double Flanged 1 metre 11332.7018.73.8 450 mm dia Ductile Iron Double Flanged 1 metre 13715.2018.73.9 500 mm dia Ductile Iron Double Flanged 1 metre 16314.3018.73.10 600 mm dia Ductile Iron Double Flanged 1 metre 22029.2018.73.11 700 mm dia Ductile Iron Double Flanged 1 metre 27318.0018.7418.74.1 15 mm nominal bore with 30 cm length 1 each 59.5018.74.2 15 mm nominal bore with 45 cm length 1 each 67.5518.7518.75.1 15 mm nominal bore, weighing not less than 32 gms 1 each 43.0018.75.2 20 mm nominal bore, weighing not less than 40 gms 1 each 50.0018.75.3 25 mm nominal bore, weighing not less than 62 gms 1 each 72.0518.7618.76.1 With common burnt clay F.P.S. (non modular) brick 1 each 152.0018.77 1 each 143.9518.78 1 metre 64.5018.79 1 metre 107.5518.8018.80.1 80 mm diameter C.I. pipe 100 metre 524.5518.80.2 100 mm diameter C.I. pipe 100 metre 689.6018.80.3 125 mm diameter C.I. pipe 100 metre 863.5518.80.4 150 mm diameter C.I. pipe 100 metre 1041.0018.80.5 200 mm diameter C.I. pipe 100 metre 1398.3518.80.6 250 mm diameter C.I. pipe 100 metre 1773.2518.80.7 300 mm diameter C.I. pipe 100 metre 1996.1018.80.8 350 mm diameter C.I. pipe 100 metre 2230.7018.80.9 400 mm diameter C.I. pipe 100 metre 2482.8518.80.10 450 mm diameter C.I. pipe 100 metre 2742.7518.80.11 500 mm diameter C.I. pipe 100 metre 3020.1518.80.12 600 mm diameter C.I. pipe 100 metre 3596.8518.8118.81.1 80 mm diameter C.I. pipe 100 metre 192.8018.81.2 100 mm diameter C.I. pipe 100 metre 235.2518.81.3 125 mm diameter C.I. pipe 100 metre 287.9018.81.4 150 mm diameter C.I. pipe 100 metre 337.3518.81.5 200 mm diameter C.I. pipe 100 metre 510.6018.81.6 250 mm diameter C.I. pipe 100 metre 594.8518.81.7 300 mm diameter C.I. pipe 100 metre 677.2518.81.8 350 mm diameter C.I. pipe 100 metre 800.5518.81.9 400 mm diameter C.I. pipe 100 metre 926.5018.81.10 450 mm diameter C.I. pipe 100 metre 1058.1518.81.11 500 mm diameter C.I. pipe 100 metre 1191.55

Providing and laying Double Flanged (Screwed / Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K-9 conforming

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.

Cutting holes up to 30x30 cm in walls including making good the same:Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete Disinfecting C.I. water mains by flushing with water containing bleaching powder at 0.5 gms per litre of water and cleaning

Extra for every operation of disinfecting the C.I. main by flushing with water containing bleaching powder @ 0.5 gms

ItemNo Description Unit Rate18.81.12 600 mm diameter C.I. pipe 100 metre 1468.3518.8218.82.1 80 mm diameter C.I. pipe 1 metre 126.8518.82.2 100 mm diameter C.I. pipe 1 metre 131.9018.82.3 125 mm diameter C.I. pipe 1 metre 136.6518.82.4 150 mm diameter C.I. pipe 1 metre 141.6518.82.5 200 mm diameter C.I. pipe 1 metre 157.7018.82.6 250 mm diameter C.I. pipe 1 metre 173.4518.82.7 300 mm diameter C.I. pipe 1 metre 187.1018.82.8 350 mm diameter C.I. pipe 1 metre 199.8518.82.9 400 mm diameter C.I. pipe 1 metre 211.5518.82.10 450 mm diameter C.I. pipe 1 metre 223.5518.82.11 500 mm diameter C.I. pipe 1 metre 234.0018.82.12 600 mm diameter C.I. pipe 1 metre 252.2018.83 Labour for cutting C.I. pipe with steel saw. 18.83.1 80 mm diameter C.I. pipe 1 each cut 41.3518.83.2 100 mm diameter C.I. pipe 1 each cut 55.6518.83.3 125 mm diameter C.I. pipe 1 each cut 77.6518.83.4 150 mm diameter C.I. pipe 1 each cut 104.7018.83.5 200 mm diameter C.I. pipe 1 each cut 139.6518.83.6 250 mm diameter C.I. pipe 1 each cut 173.1018.83.7 300 mm diameter C.I. pipe 1 each cut 208.0518.83.8 350 mm diameter C.I. pipe 1 each cut 241.4518.83.9 400 mm diameter C.I. pipe 1 each cut 276.2018.83.10 450 mm diameter C.I. pipe 1 each cut 309.8018.83.11 500 mm diameter C.I. pipe 1 each cut 344.5518.83.12 600 mm diameter C.I. pipe 1 each cut 409.8018.8418.84.1 15 mm nominal bore 1 each 6776.8019.119.1.1 100 mm diameter 1 metre 150.1019.1.2 150 mm diameter 1 metre 219.0519.1.3 200 mm diameter 1 metre 323.0519.1.5 250 mm diameter 1 metre 446.1519.1.6 300 mm diameter 1 metre 597.8519.219.2.1 100 mm diameter S.W. pipe 1 metre 496.9019.2.2 150 mm diameter S.W. pipe 1 metre 607.7019.2.3 200 mm diameter S.W. pipe 1 metre 708.4019.2.5 250 mm diameter S.W. pipe 1 metre 819.2019.319.3.1 100 mm diameter S.W. pipe 1 metre 236.1519.3.2 150 mm diameter S.W. pipe 1 metre 382.7519.3.3 200 mm diameter S.W. pipe 1 metre 449.9019.3.5 250 mm diameter S.W. pipe 1 metre 523.7519.3.6 300 mm diameter S.W. pipe 1 metre 604.3519.419.4.1 100x100 mm size P type19.4.1.1 1 each 1258.0519.4.1.2 With Sewer bricks conforming to IS : 4885 1 each 1295.3019.4.2 150 x 100 mm size P type19.4.2.1 1 each 1280.0019.4.2.2 With sewer bricks conforming to IS : 4885 1 each 1317.2519.4.3 180x150 mm size P type19.4.3.1 1 each 1367.30

Dismantling old C.I. pipes including excavation and refilling trenches after taking out the pipes, breaking lead caulked

Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

ItemNo Description Unit Rate19.4.3.2 With sewer bricks conforming to IS : 4885 1 each 1404.5519.519.5.1 100 mm diameter 1 metre 24.4019.5.2 150 mm diameter 1 metre 26.9519.5.3 200 mm diameter 1 metre 28.7019.5.4 250 mm diameter 1 metre 30.4019.5.5 300 mm diameter 1 metre 32.1519.5.6 350 mm diameter 1 metre 37.0019.5.7 400 mm diameter 1 metre 40.4519.5.8 450 mm diameter 1 metre 42.1519.619.6.1 100 mm dia R.C.C. pipe 1 metre 218.3519.6.2 150 mm dia R.C.C. pipe 1 metre 254.5019.6.3 250 mm dia R.C.C. pipe 1 metre 342.4519.6.4 300 mm dia R.C.C. pipe 1 metre 422.9019.6.5 450 mm dia R.C.C. pipe 1 metre 620.8519.6.6 500 mm dia R.C.C. pipe 1 metre 722.2019.6.7 600 mm dia R.C.C. pipe 1 metre 1084.2519.6.8 700 mm dia R.C.C. pipe 1 metre 1247.0519.6.9 800 mm dia R.C.C. pipe 1 metre 1415.7019.6.10 900 mm dia R.C.C. pipe 1 metre 1678.8519.6.11 1000 mm dia R.C.C. pipe 1 metre 2111.1019.6.12 1100 mm dia R.C.C. pipe 1 metre 2554.8019.6.13 1200 mm dia R.C.C. pipe 1 metre 2694.5519.719.7.119.7.1.1 1 each 7061.7019.7.1.2 With Sewer bricks conforming to IS : 4885 1 each 7159.1519.7.219.7.2.1 1 each 15223.2519.7.2.2 With Sewer bricks conforming to IS : 4885 1 each 15489.7519.7.319.7.3.1 1 each 19671.9519.7.3.2 With Sewer bricks conforming to IS : 4885 1 each 19901.2019.8 Extra for depth for manholes 19.8.1 Size 90x80 cm19.8.1.1 1 metre 4061.7019.8.1.2 With Sewer bricks conforming to IS : 4885 1 metre 4345.4019.8.2 Size 120x90 cm19.8.2.1 1 metre 4866.7519.8.2.2 With Sewer bricks conforming to IS : 4885 1 metre 5204.9019.919.9.119.9.1.1 1 each 7033.2519.9.1.2 With Sewer bricks conforming to IS : 4885 1 each 7181.9019.1019.10.1 1 metre 3498.2519.10.2 With Sewer bricks conforming IS : 4885 1 metre 3735.7519.1119.11.119.11.1.1 1 each 12969.2519.11.1.2 With Sewer bricks conforming IS : 4885 1 each 13335.6519.1219.12.1 1 metre 4522.3019.12.2 With Sewer bricks conforming IS : 4885 1 metre 4832.30

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top slab with 1:2:4 mix (1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56 m dia at top in cement mortar 0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Extra depth for circular type manhole 0.91 m internal dia (at bottom) beyond 0.91 m to 1.67 m With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 1.68 m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

ItemNo Description Unit Rate19.1319.13.119.13.1.1 1 each 26906.0519.13.1.2 With Sewer bricks conforming IS : 4885 1 each 27954.1019.1419.14.1 1 metre 10643.4019.14.2 With Sewer bricks conforming IS : 4885 1 metre 11445.1019.1519.15.1 With 20x20 mm square bar 1 each 228.8519.15.2 With 20 mm diameter round bar 1 each 194.0019.16 1 each 258.7019.1719.17.1 With 20x20 mm square bar 1 each 263.1519.17.2 With 20 mm diameter round bar 1 each 228.3519.18 Supplying and fixing C.I. cover without frame for manholes: 19.18.1 1 each 1185.0519.18.2 1 each 2624.6519.18.3 1 each 5289.1019.1919.19.1 L D - 2.5 19.19.1.1 Rectangular shape 600x450 mm internal dimensions 1 each 1017.1019.19.1.2 Square shape 450 mm internal dimensions 1 each 867.4019.19.1.3 Circular shape 450 mm internal diameter 1 each 820.9519.19.2 M D -10 19.19.2.1 Square shape 450 mm internal dimension 1 each 987.6519.19.2.2 Circular shape 500 mm internal diameter 1 each 907.6519.19.3 HD - 20 19.19.3.1 Circular shape 560 mm internal diameter 1 each 1390.2519.19.4 EHD - 3519.19.4.1 Circular shape 560 mm internal dia 1 each 1529.6519.20 1 each 245.5519.2119.21.1 For pipes 100 to 250 mm diameter 1 each 275.0019.21.2 For pipes 250 to 300 mm diameter 1 each 333.1519.21.3 For pipes 350 to 450 mm diameter 1 each 487.2019.2219.22.1 100 mm dia sand cast iron drop connection 1 each 4700.3019.22.2 150 mm dia sand cast iron drop connection 1 each 6775.4519.2319.23.1 For 100 mm dia sand cast iron drop connection 1 metre 1577.2019.23.2 For 150 mm dia sand cast iron drop connection 1 metre 2167.6019.2419.24.1 Rectangular manhole 90x80 cm and 45 cm deep 1 each 705.6019.24.2 Rectangular manhole 120x90 cm and 90 cm deep 1 each 1238.0519.24.3 Rectangular arch type manhole 140x90 cm and 2.45 m deep 1 each 2342.2019.24.4 Circular manhole 122 cm diameter and 1.68 m deep 1 each 1795.3019.25 Extra for depth of manholes dismantled: 19.25.1 Rectangular manhole 90x80 cm and beyond 45 cm depth 1 metre 564.1019.25.2 Rectangular manhole 120x 90 cm and beyond 90 cm depth 1 metre 671.7519.25.3 1 metre 543.6019.25.4 1 metre 613.1019.2619.26.1 1 each 1276.3019.26.2 1 each 1998.1519.26.3 1 each 1859.40

Constructing brick masonry circular manhole 1.52 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 2.30 m deep with SFRC cover and frame (heavy duty HD- 20 grade designation) 560 mm internal diameter conforming to With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12 mm dia steel Replacement of M.S. foot rests in manholes including dismantling concrete blocks and fixing with 20x20x10 cm

455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kgProviding and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.

Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less Making connection of drain or sewer line with existing manhole including breaking into and making good the walls,

Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including

Extra for depths beyond 60 cm of sand cast iron drop connection complete:

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site

Rectangular arch type manhole 140x 90 cm and beyond 2.45 m depth (up to 4.25 m depth)Circular manhole 122 cm diameter and beyond 1.68 m depth (up to 2.29 m depth)Raising manhole cover and frame slab to required level including dismantling existing slab and making good the Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20

ItemNo Description Unit Rate19.26.4 1 each 174.1019.2719.27.1 1 each 3215.0019.2819.28.1 1 each 3432.6019.2919.29.1 1 each 6048.5019.3019.30.119.30.1.1 1 each 3941.3019.30.219.30.2.1 1 each 4515.6519.30.319.30.3.1 1 each 5203.9019.31 Extra for depth beyond 45 cm of brick masonry chamber:19.31.1 For 455x610 mm size19.31.1.1 1 metre 2824.4519.31.2 For 500x700 mm size19.31.2.1 1 metre 3081.7019.31.3 For 600x850 mm size19.31.3.1 1 metre 3589.2519.3219.32.1 1 each 14324.0519.33 1 each 1489.6019.3419.34.1 100 mm dia 1 each 248.5519.34.2 150 mm dia 1 each 337.7020.120.1.1 400 mm dia piles 1 metre 1750.6520.1.2 450 mm dia piles 1 metre 2152.1020.1.3 500 mm dia piles 1 metre 2596.2020.1.4 550 mm dia piles 1 metre 2798.7520.1.5 750 mm dia piles 1 metre 4701.8520.1.6 1000 mm dia piles 1 metre 7689.7020.1.7 1200 mm dia piles 1 metre 9836.6520.1.8 1500 mm dia piles 1 metre 13714.1020.220.2.1 300 mm dia piles 1 metre 1382.1520.2.2 400 mm dia piles 1 metre 1663.9520.2.3 450 mm dia piles 1 metre 2154.4020.2.4 500 mm dia piles 1 metre 2526.5520.2.5 600 mm dia piles 1 metre 3310.9020.2.6 750 mm dia piles 1 metre 4723.6020.2.7 1000 mm dia piles 1 metre 7809.2520.2.8 1200 mm dia piles 1 metre 10079.8020.2.9 1500 mm dia piles 1 metre 14300.3020.320.3.1 300 mm dia piles 1 metre 2007.0520.3.2 400 mm dia piles 1 metre 2383.6520.3.3 450 mm dia piles 1 metre 2608.2020.3.4 550 mm dia piles 1 metre 2873.1020.420.4.1 300 mm dia piles 1 each 1341.8520.4.2 400 mm dia piles 1 each 1509.9020.4.3 450 mm dia piles 1 each 1611.45

Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar Inside dimensions 455x610 mm and 45 cm deep for single pipe line:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets:With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

With common burnt clay F.P.S.(non modular) bricks of class designation 7.5With common burnt clay F.P.S.(non modular) bricks of class designation 7.5With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe With common burnt clay F.P.S.(non modular) bricks of class designation 7.5Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand)

Providing, driving and installing driven cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter

Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter

Boring, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap

Extra over item No. 20.3 for providing additional bulb in under reamed piles, under specified dia meter (Only the quantity of

ItemNo Description Unit Rate20.4.4 550 mm dia piles 1 each 1777.5520.520.5.1 400 mm dia piles 1 metre 2172.8020.5.2 450 mm dia piles 1 metre 2562.4020.5.3 500 mm dia piles 1 metre 2724.5020.5.4 550 mm dia piles 1 metre 3046.1520.5.5 750 mm dia piles 1 metre 5436.2020.5.6 1000 mm dia piles 1 metre 7315.5020.620.6.1 Single pile upto 50 tonne capacity 20.6.1.1 Initial test 1 per test 38561.8020.6.1.2 Routine test 1 per test 17422.5020.6.2 Single pile above 50 tonne and upto 100 tonne capacity 20.6.2.1 Initial test 1 per test 46808.4520.6.2.2 Routine test 1 per test 26714.5020.6.3 Group of two or more piles upto 50 tonne capacity 20.6.3.1 Initial test 1 per test 56332.8020.6.3.2 Routine test 1 per test 34264.2020.720.7.1 Single pile20.7.1.1 Upto 50 tonne capacity pile 1 per test 17422.5020.7.1.2 Above 50 tonne and upto 100 tonne capacity pile 1 per test 26714.5020.7.2 Group of two piles 20.7.2.1 Upto 50 tonne capacity each 1 per test 34264.2020.820.8.1 Upto 50 tonne capacity pile. 1 per test 17422.5020.8.2 Above 50 tonne and upto 100 tonne capacity pile. 1 per test 27295.2020.9 1 per test 696.9021.121.1.1 For fixed portion 21.1.1.1 1 kg 358.3021.1.1.2 1 kg 387.6021.1.1.3 1 kg 394.9021.1.221.1.2.1 1 kg 406.5021.1.2.2 1 kg 436.3521.1.2.3 1 kg 443.8021.221.2.1 1 sqm 933.4021.2.2 1 sqm 969.9521.321.3.1 With float glass panes of 4.0 mm thickness 1 sqm 725.3521.3.2 With float glass panes of 5.50 mm thickness 1 sqm 905.7521.3.3 With float glass panes of 8 mm thickness 1 sqm 1227.8021.421.4.1 With stainless steel cover plate minimum 1.25 mm thickness 1 each 1953.1021.4.2 With brass cover plate minimum 1.25 mm thickness 1 each 2127.3021.5 1 kg 465.4521.6 1 each 100.7021.721.7.1 1 kg 447.0521.7.2 1 kg 476.3521.821.8.1 Upto 5 mm depth and 5 mm width 1 metre 75.1021.9

Providing, driving and installing driven Pre-cast reinforced cement concrete piles of specified diameter and length below

Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform and preparation

Cyclic vertical load testing of pile in accordance with IS Code of practice IS: 2911 (part IV) including preparation of pile head

Lateral load testing of single pile in accordance with IS Code of practice IS : 2911 (Part IV) for determining safe allowable

Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic Powder coated aluminium (minimum thickness of powder coating 50 micron)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic Powder coated aluminium (minimum thickness of powder coating 50 micron)Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board Pre-laminated particle board with decorative lamination on one side and balancing lamination on other sidePre-laminated particle board with decorative lamination on both sidesProviding and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315 ,

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut Anodised aluminium sheet 2.5 mm thick (anodised transparent or dyed to required shade according to IS: 1868, Powder coated aluminium sheet 2.5 mm thick (minimum thickness of powder coating 50 micron) Filling the gap in between aluminium frame & adjacent RCC / Brick / Stone work by providing weather silicon sealant over Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium extruded sections.

ItemNo Description Unit Rate21.9.1 For fixed portion 1 kg 11.6021.9.2 For shutters of doors, windows & ventilators 1 kg 11.6021.10 1 sqm 3328.4021.1121.11.1 205 X 19 mm 1 each 205.4021.11.2 255 X 19 mm 1 each 229.8021.11.3 355 X 19 mm 1 each 284.4021.11.4 510X19 mm 1 each 517.8521.11.5 710X19 mm 1 each 931.3521.1221.12.1 Anodized (AC 15 ) aluminium tubular handle bar 1 each 498.8521.12.2 1 each 544.4021.12.3 1 each 555.8021.13 1 each 356.1021.14 1 kg 332.3021.1521.15.1 Anodized (AC 15) aluminium 1 each 50.5021.15.2 Powder coated minimum thickness 50 micron aluminium 1 each 51.7021.15.3 1 each 52.8521.1621.16.1 Anodized (AC 15) aluminium 1 each 60.9521.16.2 Powder coated minimum thickfness 50 micron aluminium 1 each 66.8021.16.3 1 each 72.6021.17 1 kg 388.4021.18 1 sqm 4430.8022.122.1.1 Using rough kota stone 1 sqm 732.8522.222.2.1 Using rough Kota stone 1 sqm 884.9022.3 1 sqm 399.6022.422.4.1 Serrated with central bulb (225 mm wide, 8-11 mm thick) 1 metre 459.1522.4.2 Dumb bell with central bulb (180 mm wide, 8 mm thick) 1 metre 413.8522.4.3 Kickers (320 mm wide, 5 mm thick) 1 metre 424.3522.5 1 sqm 215.1522.6 1 sqm 311.5022.722.7.1 1 sqm 786.7022.822.8.1 1 sqm 262.7522.9 1 sqm 406.9022.10 1 sqm 459.4022.11 1 sqm 459.6022.12 1 sqm 24.0022.1322.13.1 At 6 cudm per sqm 1 sqm 11.8022.13.2 At 8 cudm per sqm 1 sqm 15.0022.14 Grading roof for water proofing treatment with: 22.14.1 1 cum 4601.8522.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand) 1 cum 7327.9022.14.3 Cement mortar 1:4 (1cement : 4 coarse sand) 1 cum 6559.5522.15 1 sqm 391.7522.16 1 sqm 300.7522.17 1 sqm 493.9522.18

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws Powder coated minimum thickness 50 micron aluminium tubular handle barPolyester powder coated minimum thickness 50 micron aluminium tubular handle barProviding and fixing 100 mm brass locks (best make of approved quality) for aluminium doors including necessary Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws

Polyester powder coated minimum thickness 50 micron aluminiumProviding and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of

Polyester powder coated minimum thickness 50 micron aluminiumProviding and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing Providing and laying integral cement based water proofing treatment including preparation of surface as required for With average thickness of 120 mm and minimum thickness at khurra as 65 mmProviding and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth Supplying and applying bituminous solution primer on roof and or wall surface at 0.24 litre per sqm. Deduct for omitting in water proofing treatment final course of spreading stone grit 6mm down size or pea sized gravel:

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated five layer 2 mm thick water proofing

ItemNo Description Unit Rate22.18.1 2 mm (for corrugated roof sheets) 1 sqm 323.1522.1922.19.1 3 mm thick 1 sqm 374.2522.2022.20.1 3 mm thick 1 sqm 422.8022.21 1 sqm 53.8523.1 1 cum 30.9023.2 1 cum 260.7023.3 1 cum 215.1523.423.4.1 Screened through sieve of I.S. designation 20 mm 1 cum 138.3023.4.2 Screened through sieve of I.S. designation 16 mm 1 cum 152.6023.4.3 Screened through sieve of I.S. designation 4.75 mm 1 cum 164.1023.5 Rough dressing the trenched ground including breaking clods. 100 sqm 59.8523.6 100 sqm 194.0523.7 Fine dressing of the ground. 100 sqm 145.9023.8 1 cum 21.0023.9 1 cum 14.3523.1023.10.1 In rows 5 cm apart in both directions 100 sqm 700.2523.10.2 With grass Turf 100 sqm 528.1023.11 100 sqm 1353.1023.12 100 sqm 2402.5523.13 1 cum 87.5023.1423.14.1 Holes 1.2 m dia and 1.2 m deep 1 each 186.9023.14.2 Holes 90 cm dia, and 90 cm deep 1 each 80.2023.14.3 Holes 60 cm dia, and 60 cm deep 1 each 24.7023.14.4 Holes 45 cm dia, and 45 cm deep. 1 each 10.7023.1523.15.1 1 each 902.5523.16 1 each 2580.6023.1723.17.1 A coat of coal tar 1 each 191.3023.17.2 1 each 299.3023.1823.18.1 A coat of coal tar 1 each 381.0023.18.2 1 each 547.5023.1923.19.1 1 metre 23.5523.20 1 cum 7.1523.21 1 cum 200.8023.22 1 cum 223.8023.23 1 cum 275.4023.24 100 sqm 110.8523.25 1 cum 165.2023.26 1 each 1540.8023.27 1 each 2421.6023.28 1 cum 178.7023.2923.29.1 1 each 148.9023.29.2 1 each 109.0023.3023.30.1 1 each 179.6524.1

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be Supplying and stacking sludge at site including royalty and carriage complete (sludge measured in stacks will be reduced Supplying and stacking at site dump manure from approved source, including carriage complete (manure measured in

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-chargeGrassing with selection No. 1 grass including watering and maintenance of the lawn for 30 days or more till the grass

Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of

Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below With common burnt clay F.P.S. (non modular) bricks of class designation 5Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, Two or more coats of synthetic enamel paint of approved quality shade over a priming coatMaking tree guard 53 cm dia and 2 m high as per design from empty coal tar drums, supplied free by the department, Two or more coats of synthetic enamel paint of approved quality and shade over a priming coatEdging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and Common burnt clay F.P.S. (non modular) bricks of class designation 7.5Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and Excavation in bajri path including stacking of serviceable and unserviceable material separately, lead up to 50 m and lift up Excavation in water bound macadam road including stacking the serviceable and unserviceable material, separately and Flooding the ground with water including making kiaries and dismantling the same. Supplying and stacking of well decayed cow dung manure at site including carriage complete (Cow dung manure measured Providing and fixing M. S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below Providing and fixing M. S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mmTop inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mmProviding Square Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 Top inner width 35 cm, outer bottom width 25 cm, total height 35 cm and wall thickness 25.4 mmBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I),

ItemNo Description Unit Rate24.1.1 All types of soil24.1.1.1 300 mm dia 1 metre 358.9524.1.1.2 350 mm dia 1 metre 392.6024.1.1.3 400 mm dia 1 metre 502.5024.1.2 Rocky strata including Boulders24.1.2.1 300 mm dia 1 metre 794.9524.1.2.2 350 mm dia 1 metre 823.3524.1.2.3 400 mm dia 1 metre 922.6524.224.2.1 All types of soil24.2.1.1 300 mm dia 1 metre 418.7524.2.1.2 350 mm dia 1 metre 465.3024.2.1.3 400 mm dia 1 metre 628.1524.2.2 Rocky strata including Boulders24.2.2.1 300 mm dia 1 metre 846.3024.2.2.2 350 mm dia. 1 metre 871.2024.2.2.3 400 mm dia. 1 metre 1091.2024.324.3.1 100 mm nominal size dia 1 metre 451.9024.3.2 150 mm nominal size dia 1 metre 539.2024.3.3 200 mm nominal size dia 1 metre 975.4524.424.4.1 100 mm nominal size dia 1 metre 457.9024.4.2 150 mm nominal size dia 1 metre 545.0024.4.3 200 mm nominal size dia 1 metre 981.8024.5 1 cum 459.0524.6 1 cum 828.4524.7 1 cum 799.4024.8 1 cum 842.8024.9 1 each 897.1024.1024.10.1 1 metre 939.4024.10.2 1 metre 1294.3024.10.3 1 metre 1555.1024.1124.11.1 100 mm nominal size dia 1 metre 991.7024.11.2 150 mm nominal size dia 1 metre 1364.0024.11.3 200 mm nominal size dia 1 metre 1625.3024.12 1 hour 549.1024.1324.13.1 100 mm dia 1 each 146.3524.13.2 150 mm dia 1 each 182.9524.13.3 200 mm dia 1 each 219.5024.1424.14.1 100 mm clamp 1 each 977.7024.14.2 150 mm clamp 1 each 1033.1024.14.3 200 mm clamp 1 each 1173.2524.1524.15.1 100 mm dia 1 each 171.2524.15.2 150 mm dia 1 each 206.1024.15.3 200 mm dia 1 each 240.9525.1 1 sqm 19.8525.2 1 sqm 127.1025.3 1 sqm 60.6525.4 1 sqm 26.20

Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I),

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS)

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild 100 mm nominal size dia having minimum wall thickness 5.00 mm 150 mm nominal size dia having minimum wall thickness 5.00 mm 200 mm nominal size dia having minimum wall thickness 5.40 mmSupplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I),

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part

Raking out joints of stone masonry surface to the required width and depth, with due care and precaution, by Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and

ItemNo Description Unit Rate25.5 1 sqm 104.1025.6 1 sqm 104.10

25.7 1 sqm 256.50

25.8 1 sqm 75.50

Ruled /Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of Ruled/ Flush pointing on White sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime:1.5 surkhi (15% dark red and 85% light yellow surkhi ):1/2 marble dust}. (The rate is inclusive of all materials & labours involved except scaffolding).

Applying two or more coat of Ethyl Silicate chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacturer, with brush or spray on the existing stone masonry surface till there is no further absorption of chemical by stone surface, including protecting the applied surface from direct sunlight by suitable means during application, all complete as per direction of the Engineer-in-Charge (The rate is inclusive of all materials & labours involved except scaffolding).

Applying breathable, non-reactive, antifungal, and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding).

SubheadN SubheadName2 EARTH WORK3 MORTARS4 CONCRETE WORK5 REINFORCED CEMENT CONCRETE WORK6 BRICK WORK7 STONE WORK8 MARBLE & GRANITE WORK9 WOOD AND PVC WORK

10 STEEL WORK11 FLOORING12 ROOFING13 FINISHING14 REPAIRS TO BUILDINGS15 DISMANTLING AND DEMOLISHING16 ROAD WORK17 SANITARY INSTALLATIONS18 WATER SUPPLY19 DRAINAGE20 PILE WORK21 ALUMINIUM WORK22 WATER PROOFING23 HORTICULTURE AND LANDSCAPE24 RAIN WATER HARVESTING & TUBEWELLS25 CONSERVATION OF HERITAGE BUILDINGS