basic option pcn0410c - tadmur trading intelligent t… · n et wo rk qu ipm n ,di s v c. l b...
TRANSCRIPT
Communication capabilities via a Web browser further expandair conditioning control possibilities.
Convenient controllers that offer more freedom to administrators.
Connectable to up to 128 Indoor unitsThe number of connectable indoor units can be doubled by adding an external adapter (Optional)
Control the Air Conditioning System from ElsewhereCentralized monitoring control system based on a Web browser (Optional)
Malfunction Reports to a Mobile Phone, AnywhereMalfunction reports delivered by e-mail (Optional)
Compatible with the 24-Hour Air Conditioning Network Service SystemBuilt-in modem for connecting to the Air Conditioning Network Service System (Optional)
Basic
Configuration and engineering for eachproject is necessary.
Hardwareintelligent Touch Controller
DSC601C5164 Groups
10
For further details, please consult your nearest Daikin Distributor or dealer.
Item
Model No.Max. indoor units
Max. outdoor units
Product data andengineering
Option
P.P.D.DCS002C51
——
Additional configuration and engineering for eachproject is necessary.
HardwareD -NET Plus Adaptor
DCS601A52+64 Groups
+10
SoftwareWeb
DCS004A51——
SpecificationNamePower supplyInstallation method condition for useOperating conditionDimensionsOverseascertification
LCD PanelCommunicationfunctionsInput terminals
Surrounding temperature/humidity(W × H × D)Safety of InformationTechnology EquipmentInterference (EMC)Size/no. of dots/no. of colorsD -NET ×110BASE-TDigital input Di ×1Pulse input Pi ×3
Externally supplied 100 V AC–240 V AC 50/60 HzJIS4 switchbox embedded in indoor wall0°C to 40°C/less than 85% RH (if no condensation)230 × 147 × 107 (mm)IEC60730 (including IEC60335)
EN55022 Class-A , EN550245.7 inches / QVGA 320 × 240 / 4096 colorsA/C equipment communication lineWeb optionForced Shutdown Power measuring pulse
Externally supplied 100 V AC–240 V AC 50/60 Hz —-10°C to +40°C/less than 90% RH157 × 190 × 42 (mm)IEC60730 (including IEC60335)
EN55022 Class-A , EN55024 —A/C equipment communication line — — Power measuring pulse
kWh meteritem
kWh meter Pulse transmitterRequirement Specification
•1 Pulse to 1 kW or 10 kW pulse width must be within 40–400 m/sec.•Output relay must be electronic type only. 1 Pulse to 1 kW or 10 kW pulse width must be within 40–400 m/sec.•No voltage output
intelligent Touch Controller (DCS601C51) D -NET Plus Adaptor (DCS601A52)
PCN0410C
Optional adaptersItemInputOutput
Installation method OperatingConditionPower supplyRated power consumptionApplied standardMass(Weight)Dimension
surrounding temperaturehumidity
8pairs based on a pair of On/Off input and abnormality input
indoor unstallation-10 to +40
10 to 85%AC200V-240V,50/60Hz
15W Safety standard : IEC730,EMC standard : CISPR22-A(EMI),CISPR(EMS)
2.5kg198(H) 335(W) 70(D)mm
4pairs based on a pair of On/Off input and abnormality inputIn case of normally output, 4 units are controllable.In case of instaneous output, 2 units are controllable.
Di unit (DEC101A51) Dio unit (DEC102A51)
All rights reservedPrinted in Japan 11/06/003 AD.HP.SWc
DealerHead Office:Umeda Center Bldg., 2-4-12, Nakazaki-Nishi,Kita-ku, Osaka, 530-8323 Japan
Tokyo Office:JR Shinagawa East Bldg., 2-18-1, Konan,Minato-ku, Tokyo, 108-0075 Japan
http://www.daikin.com/global/
Printed on 100% recycled paper with soy ink.Specifications, designs and other content appearing in this brochure are current as of November 2006 but subject to change without notice.
ISO 14001 is the standard defined by the International Organization for Standardization (ISO) relating to environmental management systems. Our group has been acknowledged by an internationally accredited compliance organisation as having an appropriate programme of environmental protection procedures and activities to meet the
About ISO 14001
ISO 9001 is a plant certification system defined by the International Organization for Standardization (ISO) relating to quality assurance. ISO 9001 certification covers quality assurance aspects related to the “ design, development, manufacture, installation, and supplementary service” of products manufactured at
About ISO9001
JMI-0107 JQA-1452 EC99J2044 JQA-E-90108
Trademark of American Soybeen AssociationPrinted on 100% recycled paper
Using lntelligent touch controller
1. Ins tallation of intelligent touc h c ontroller mus t be performed by a Daikin-trained engineer.
2. Onc e a month, adjus t the c loc k of the intelligent touc h c ontroller.
3. Daikin’ s unique P.P.D. s ys tem es timates the power c ons umption of eac h individual indoor unit bas ed on data c ommunic ated from indoor units and c ompared to the power c ons umption of an air c onditioning ins tallation with a s tandard s etup. Note that P.P.D. is not a “ gauge” adapted to the methods of meas uring power c ons umption in eac h c ountry. All c ountries differ in the ways tenant billing s ys tems are implemented depending on their res pec tive legal s ys tems . Data obtained by P.P.D. is for referenc e only and s hould not be us ed for offic ial financ ial trans ac tions .
Input (Lights)
Input (Key signal -General purpose ADP)
Dio UnitDEC102A51
Dio UnitDEC102A51
System
Set temperature change command OFF command
ACC center• Air Conditioning Network Service System
Pi Port
• Connection to power consumption meter when using power proportional distribution function. (Optional)
RS-232C
Publicphone line
Air Conditioning Network Service System modem for connections
• CSV output of power propor- tional distribution results (Optional)
PCMCIAFlash
Memory
Remote monitor-ing and control
Mobile Phone PC
Troublereports
The user-friendly controller already features colors, multilingual function, and icons in the display for ease of understanding; now, further convenience has been added. New communication capabilities enable centralized control via a Web browser and the sending of e-mail alerts on system operation. A wide variety of control methods can be accommodated, permitting administrators to monitor and operate the system even when they are away from the controller.
D -NET Plus AdapterDCS601A52(option)
Number of indoor unit expanded from 64 to 128.
D -NET
Function 1
Function 2 Function 3
Function 4
Function 5
Function 6
Support for centralized control from elsewhere using a PC with a Web browser (Optional)
Function 1
Sending of e-mail alerts to a specified address when malfunctions occur (Optional)
Function 2
Built-in modem for connecting to Air Condition-ing Network Service System (Optional)
Function 3
Doubling of number of connectable indoor units by adding a D -NET Plus Adapter (Optional)
Function 4
Management of facilities / equipment other than A/C units(By adding Dio unit or Di unit)
Function 5
Simple Interlock Function
Function 6
S ys te m C ompone nts
New communication functions in the user-friendly icon-based multilingual controller simplify centralized control of the VRV system.
1 2
Enhanced convenience through linkage to the Air Conditioning Network Service System
Mal-function
Air Conditioning Network Service System*
ACC center
Repair
Personnel at the center monitor the occurrence of malfunctions and track their causes via telephone lines. As soon as a problem occurs, expert service engineers are dispatched with precisely the tools and parts they need to make repairs.
Rapid repairs because service engineers know the cause of the problem before setting out.
Advance malfunction warnings help prevent the sudden occurrence of problems later.
C an be linked to the 24-hour Air C onditioning Network S ervic e S ys tem.
* There are restrictions in applicable areas and release times, therefore please consult us separately for details.
Malfunctions that can be difficult for children or elderly persons to understand are monitored remotely.
Allows dispatching of service engineers without the need for a call from the
customer.
intelligent Touch Controller
Indoor Unit HRV
Optional software
Using an Internet connection, multiple properties can be controlled from a single location.
PPD data can be accessedfrom remote place via internet.
PPD data used to be accessedin each building by PCMCIA card.
Pulse signal fromthe power meter
Pulse signal fromthe power meter
Pulse signal fromthe power meter
User-specific access restrictions
A controller that offers freedom to administrators.
Remote Monitoring of Multiple Properties
Ability to Control Air Conditioning Systems in Multiple Buildings from a Central Headquarters
PPD (Power Propotional Distribution)
Calculation of air conditioning costs and analysing usage trends(Option)
Availability of PPD data on web
web access function PPD function
3 4
Control and management are possible via the standard Web browser that comes installed on all PCs.
Main Monitoring Screen
User’s PC
HUB
Ethernet
Indoor unit Indoor unit Indoor unit HRV
It is possible to control the air conditioning system, via the Internet, from your home or any other location with a PC. Should a malfunction occur, a notification is sent by e-mail to a mobile phone or PC (e-mail address specified by the user). This gives administrators the freedom to leave the room where the controller is located.
•Special Software Is Not Required!
Notes1. Microsoft Internet Explorer 6.0 SP1, or a later version, is the recommended Web browser for use with the system.2. The J2SE V1.4.2 Java plug-in from Sun Microsystems is required.
Item
Real-time status monitoring
Operation
Malfunction history display
User password setting
Changing of language displayed
Func tions Us able with a Web B rows er
Internet*
Screen of user’s PCon fourth floor
Screen of administrator Head quarters office.
Note:The following items need to be set up, managed, and operated by yourself.1. Security
An environment that satisfies your security policy.2. Network
Equipment and settings that suit your network environment. A network security device such as a firewall which is necessary when connecting via the Internet.
3. The Internet connection is shown for illustration purposes only.Network equipment, and an Internet service provider contract, etc., will be necessary to connect to the Internet.
NEW
Operation durations and the usage status of individual indoor units are monitored, allowing for highly precise automatic power distribution analysis.
It is possible to access the PPD data of remote and multiple buildings, via internet, from any location with a PC web by the combination of Web access and PPD function. There is no necessity to go to the site, where the intelligent Touch controller is installed. Therefore it enables to simplify the management of electric power control.
Daikin’s exclusive PPD system* keeps track of power distribution for each indoor unit or any specifically designated area. It performs air conditioning billing calculations quickly and automatically.
*This measurement method is exclusive to Daikin and has no legal basis.
Operation durationPower consumptionAir supply temperatureExpansion valve opening
Operation informationof individual indoor units
Automatic calculation oftotal power consumption ofindividual indoor units
Pulse s
ignal
from
the po
wer mete
r
Power meter Total power consumption
Tenant A
Tenant B
Tenant C
Tenant AHIGH
Tenant BLOW
Tenant CMEDIUM
InvoiceInvoice InvoiceInvoice InvoiceInvoice
InvoiceInvoice
Internet
PCMCIAFlash
Memory
Availability of PPD data on web by the combination of Web access and PPD function
Security
Control and Monitoring Functions Control and Monitoring Functions
Registering Passwords
With jus t two or three s imple ac tions , you c an s pec ify the Air C onditioner you want and c ontrol it with the utmos t s peed
Ic on Display
Displayc hange
List Display
S elec tion of ic on orlis t display
S elec tion of zone orgroup display
ON/OFF settings for selec ted groups and/or zones
C omplete display of the c ondition of all Air C onditioners
Display of zone name
Various ic ons that you c an set yourself
Displays c urrent date and timeDisplays system c ondition
(forc ed shutdown, etc .)
C an display detailed legend
Allows you to set the name of the individual unit
Allows eas y operation of a variety of func tionsinc luding the s etting of operation mode andtemperature
The us er c an s witc h between the ic on dis play, a lis t dis play, and an ic on detail dis play as des ired.
S etting of operation mode ac c ording to respec tive purpose
Temperature setting ac c ording to respec tive purpose
Displays detailed Air C onditioner information/data
S c reen related to advanc ed operation (seldom-used sc reen)
An often-used operation sc reen
ON/OFF of all Air C onditionersColor LCD
Screen
Touch ScreenOperation
IconDisplay
2 Selection by touch1 Page Up/Down
E nglish Frenc h Italian S panishG erman C hinese
Passwords for general users and for administrators can be registered separately, permitting access to different levels of control functions.
Multiple Languages
The display language can be switched as desired (Eng-lish, French, German, Italian, Spanish and Chinese). By displaying text in the admin-istrator’s own language, ease of use is enhanced.
Enhanced legibility and ease of use, plus expanded control functions.
Ic on Detail Display
5 6
Auto Heat/Cool Change-over Temperature Limitation
This function allows the optimal room temperature to be maintained without users having to change the operation mode by automatically switching the air conditioner’s operation mode (cooling or heating) ac-cording to the room temperature for locations where the temperature difference during the day and at night is very large.
This function automatically starts and stops air conditioners in order to prevent the room temperature of unoccupied rooms from getting too high or too low.
°C
CoolingSetpoint
HeatingSetPoint
Heating
Heating
Cooling
HeatingCooling
Heating
Time
Cooling
Temp Difference Change Set Point
Change Set Point
RoomTemp
Max
Start HeatingStop Heating
Time
Stop Cooling
Min
Min+4°C
Max4°C
Room Temperature is maintained withinthe range
HeatingMode
CoolingMode
Start Cooling
Enhanced Scheduling Function
Simple Interlock Function Added
Enhanced History Function
It is possible to set up an automated yearly schedule specifying such items as daily startup and shutoff times, temperature settings, and oper-ation modes. In addition, the number of patterns that can be registered has been increased from seven to ten.
Changing Display Colors
The color of the icons indicating running and stopped status can be changed. This makes it easy to customise the display to match the ad-ministrator’s preferences or match the display of other control devices.
The simple interlock function allows for controlling of multiple groups and zones based on the operation status of the selected groups or zones.
The error history function keeps a detailed record broken down by mal-function item. This is an important feature for maintaining the system and dealing with malfunctions, and it helps realize that appropriate main-tenance work is performed.
Calendar Screen
Input (Lights)
Input (Key signal)
Dio UnitDEC102A51
Dio UnitDEC102A51
Set temperature change commandOFF command
Note: Colours showncan be changed.
R un S top E rror C om.E rror Maintain