bank of baroda · day to day supervision & coordination of the work at site. ... 6 250 volt 6...

1

2.

3.

4.

5.

6.

7.

1.

2.

3.

Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the

proposed interior & electrical work of Khajutti Branch,Vill+P.O-Khajutti,Block-Bagnan-I, P.S-

Bagnan, Dist - Howrah, Pin-711303 West Bengal. The work is to be completed within 2(Two)

weeks.

(Government of India Undertaking)

NOTICE INVITING TENDER

Interested agencies having experience in work of similar nature & magnitude and fulfilling the

eligibility criteria given below may download detailed tender document from Bank's Website

http:bankofbaroda.com

Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility

criteria & the technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial

bid along with a copy of the tender document, duly signed in all pages both shall be separately

sealed & submitted in another sealed envelope to the Deputy. General Manager, Bank of Baroda,

West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt Lake City,

Kolkata : 700 091, by 3 P.M. on 05.03.2013 along with Earnest money amounting to Rs. 7,000/- by

Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.

Part 'A' will be opened at 3.30 p.m.. on 05.03.2013.

Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the

tender document. The unopened part 'B' along with Earnest Money deposit for those not fulfilling

qualifying criteria will be returned.

Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our

Consultant M/s. AXIS, C206, 2nd floor, City Center, SEC-I, Saltlake City, Kolkata - 700064, Phone no -

9831932317 , 9143120969.

The Bank reserves the right to summarily reject any or all application without assigning any reason

there for.

MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)

The tenderer should have completed in last three Financial years (i.e. current year & two previous

financial year) in Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc.

minimum 3 (three) similar composite work (Interior Furnishing & Electrical) costing not less than Rs.

15.00 lacs in single contract. (Work order & completion Report in support must be submitted &

marked annexure-I)

The total contract amount received by the Tenderer during the last 3 financial years should be

minimum as 25.00 lacs per year in contract work. In support of this the Tenderer should submit

audited balance sheet duly Certified by the Chartered Accountant & marked annexure-II.

The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an

amount of 200% of the advertised Tender value marked annexure-III.

Bank of Baroda

1

4.a) The Tenderer shall furnish copies of :

i) IT Registration Certificate with No.

ii) Sales Tax Registration Certificate with No.

iii) Service Tax Registration Certificate with No.

iv) Electrical Contractor's License with No.

v) Electrical Supervisor’s License with No.

5.

a)

b)

c)

d)

e)

List of technical persons available on hand, years of their association with the firm & proposed to be

engaged for the subject work, if selected (marked annexure-IX) ;

List of important plant & machinery available on hand (own) and proposed to be inducted (own &

hired to be given separately) for carpentry & electrical work (marked annexure-X)

- marked annexure - IV

- marked annexure - V

- marked annexure - VI

- marked annexure - VII

- marked annexure - VIII

The Tenderer should also submit the following documents along with the Tender.

Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for

day to day supervision & coordination of the work at site.

All informations are to be fully authenticated & documented failing which the documents submitted will not

be accepted.

List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt. Govt.

undertaking / Corporate Sectors giving description of work, organisation for whom executed,

approximate value of contract at the time of award, date of award and date of scheduled

completion of work, date of actual completion and final value of contract should also be given

(marked annexure-XI)

List of works in hand indicating description of work, contract value, approximate value of balance

work yet to be done and date of award (marked annexure-XII)

2

1.

2.

3.

4.

5.

6.

7

8.

9.

10.

11.

All the tenderer are advised in their own interest to be present on the date of opening of the Bids, at

Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to

be used in the work.

GENERAL TERMS & CONDITIONS

The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.

Contractors will be required to arrange for their own storing. Dismantled materials are to be carted

away from site at own cost and disposed of in conformity with Municipal regulations.

The quoted rates, are to include cost of all materials, labour and or any other material, all statutory

taxes, transport, handling delivery at site and installation, complete in all respect, as per drawing,

directions or instructions of Employer/Consultant. The quoted rates are also to include dismantling of

partitions, counters, old electrical wirings etc. and stacking serviceable materials and disposal of

debris, etc.

The arrangement for “ Wire Management " is to have prior approval of the Client.

The quoted rates shall remain firm during the entire currency of contract. No price variation for any

causes whatsoever, shall be entertained.

The time of completion shall be two (2) weeks from the date of placement of order.

The offer shall remain valid for acceptance for a period of 30 days from the date of submission of

offer.

Payments will be made once on completion by the Employer within 15 days after certification of bill

by the Consultant 10% of the total payable amount is to be retained as retention money and will

become due for release after expiry of six months from the date of completion of the installation &

subject to satisfactory maintenance of the executed work.

Tenders addressed to Deputy General Manager, Bank of Baroda, West Bengal & Sikkim Region and

submitted at his office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata :

700 091, by 3 P.M. on 05.03.2013, accompanied by Earnest Money amounting to Rs. 7,000/- by Bank

draft payable to Bank of Baroda and other documents as mentioned in NIT. Part 'A' of the tenders

will be opened at 3.30 P.M. on the same date.

The Employer reserves the right to themselves to accept or reject any or all offers without assigning

any reason therefor.

the specified time. Any corrigendum will be issued only in our website.

3

SL.NO. ITEMS

1 False Ceiling / Channels

Wood Frame Work / Wood Section : All Wood

Must be well seasoned, free from knots, other

defects decay and defects due to handling and

Transportation. Wherever necessary, provide with

anti – termite Treatment.

3 Wood Skirting / Moulding / Lipping / Bidding

a) Door frame :

4 Wood Preservative :

5 Fire Reterdent Paint

6 BWR Ply / BWP Block board with ISI mark

7 Flush Door

Laminate ( 1.0mm thk.)

9 Door Closure ( Heavy Duty )

10 Floor Spring ( Heavy Duty )

11 Door Lock ( Dead )

12 Door Handles ( ‘H’ Shape)

13 Drawer / Storage Handle ( 4”/ 6” )

14 Drawer / Storage Lock ( Multipurpose )

15 Night latch

16 Screws

17 Hinges

18 Sliding Telescopic Drawer Channel

19 Key Board Tray ( Metal)

20 Telescopic CPU Stand ( Metal )

21 Cable Organiser

22 Adhesive

23 Aluminium Door Frame

24 Soft Board

25 Vertical Blinds

26 Glass

27 Paints (Synthetic Enamel / Acrylic Emulsion)

28 PVC Flooring

29 Texture Paint

30 Mirror

31 European WC / Washbasin

32 Sanitary Fittings

33 G.I. Pipe

34 Cement

35 Footmat

36 Vitrified Tiles

37 Ceramic Tiles

38 Chairs

39 All other items not covered above

LIST OF APPROVED MATERIALS FOR CIVIL & FURNISHING WORK

2

8

APPROVED MAKE

India Gypsum

Malaysian Sal

White Beach / White Ceader

Teak wood

STP Pentaphene Pale / Termiseal by PCI / Bison by

British Paint

Sunmica / Euromica / Green lam /Merino / Century mica /

Royal Touch

Industrial grades of Noble / Viper

Kich /Neki / Hassley/EGL ( HMS –B – 9122 / 9123)

Ebco / Hafele /Hettich /Doorset /Godrej/Kombo ( 502)

Green /Century/Sylvan

Green /Century/Sylvan

Godrej / Archi / Sterling ( DC 2000)

Godrej / Archi / Sterling ( FS 3000 )

Godrej / Hafele /Hettich / Kich / Doorset / 4C Acme ( ML

– REG – SS )Godrej / Hafele /Hettich / Kich / Doorset / 4C Acme (

PHG – HSS )

Mac / Annums / Window Fashion

Jolly Board

Modi /Ashai / Saint Gobain

Godrej / 4C Acme ( RL – MACHO – OS – SS )

GKW / Nettle fold

CIEF

Ebco / Kombo

Ebco / Innofitt Systems ( KD 510. M)

Ebco / Innofitt Systems ( CPU MST )

Ebco / Innofitt Systems ( CM 63.C )

Fevicol SH / Fevimate TL

Jindal

Naveen /Jhonson/Euro

Johnson / Naveen/Kajaria

Godrej/Methodex/Monarch

Asain Paints ( Colour World) / Berger( Colour Bank )

Krishna Vinyl / Armstrong / LG

Spectrum/Asian paints/Nerolac

Modi /Ashai / Saint Gobain

Hindware /Parryware

Jaquar / Essco Delux

As per sample approved by Employer/Consultant

Tata ( Medium ) / Jindal /Bansal

Ambuja/ Laferge / ACC

Birla 3M / Approved Equivalent

4

SL.NO.

1 ITEMS

2 MS pipe ISI mark. 16 SWG

3 M.S. fittings (Bend / Elbow / G.I Saddle / 3way

circular box)

4 Wire PVC insulated copper flexible wire. (FRLS)

5 A.C. starter

6 250 Volt 6 Amp type switch, socket, modular plates

7 250 Volt 6/16 Amp. 3 pin modular type switch,

socket

8 Relay

9 Capacitor

10 Current Transformer

11 Changeover Swiitch

12 Amps meter & Voltmeter. 96 x 96 mm (Analog)

13 Miniature Circuit Breaker & MCB Distribution

Boards, RCBO

14 Amoured Cable

15 Telephone Socket RJ - 11

17 Telephone Cable ( 0.51 mmsq) 10/20 pair

18 Lugs

19 Terminal Connector

20 SFU / SPN / TPN Sheet metal housing / Open

execution front handle with housing

21 Telephone Connector

22 Selector Switch ( Rotary type)

23 Rigid PVC Conduit

24 Sliding fuse / DZ fuse

25 PVC casing ( 20 mm )

26 Clock switch / Time switch

27 PVC Tape

28 Join box ( 6” x 4” MS box ) heavy type

29 Call Bell

30 Brass cable gland

31 LED Indicator ( bright type)

32 PVC Flexible pipe

33 Metal Clad socket & plug having scraping earth

arrangement

34 MCCB

35 Light fittings

36 All other items not covered above

Wipro / Philips / Havell’s

As per sample approved by Employer/Consultant

Mikadov / L&T / MDS

Hanuman / Precession / Kalinga

Siemens / L& T/ MDS / Schneider

Siemens / L& T/ Northwest Wipro / Havell’s

Steel Grip / Anchor

Local Make

Anchor / Max / Nortwest

ESSEN

L & T / Siemens / Havell’s

KORN type

Kaycee / A.E./ L& T/ Siemens

Arun ( heavy type ) / Dowells

BEC / Kalinga / Plaza / AKG / Precession

Bharat Lender / BCH

Precession / Supreme / Oriplast

L & T/ MDS / GIC / T & C

Dowells

Kappa / L&T / Schneider (CG) A.E.

L&T HPL / GEC / Havells

AE / IMP / L&T ALSTOM/ HPL / Havlells

Siemens / Northwest wipro / Havell’s

North – West / Crabtree/ MDS Legarand

NICCO / Northwest Wipro/ Havell’s CCl

Crabtree / ABB / MDS

National / Delton / Netco / Finolex / Retco

Kolors/ Anchor/Northwest Wipro

Legrand / Siemens/ Nortwest Wipro

ALSTOM / L & T

Mamal / L&T

APPROVED MAKE

BEC / NIC

BEC / NIC

Finolex / Havel’s / R.R. Kable

LIST OF APPROVED MAKE OF MATERIALS FOR ELECTRICAL WORKS

5

Sl.No. Item of Works Unit Quantity Rate Amount

1 PARTITIONS:-

NOTE:

A. The rate for wooden partition or cladding will

include for making out outlets of appropriate size for

electrical, telephone and computer terminals wherever

required. The surface of the electrical boxes if any shall

be hidden/ flushed with laminate work according to

design.B. All wooden framework for partition or any allied

work shall be free from large knots, cracks, saps and

other defects and to be treated with two coats of

solignum paint. Timbers shall be of specified quality

and approval of competent authority shall be obtained

before fixing the framework.

C. All plywood shall be of BWR grade and blockboard

shall be BWR.

D. All door frames and members of the partition walls

to be fixed securedly with RCC, ceiling and floor.

E. All framework shall be of sesoned kapur wood

unless otherwise mentioned.

a Solid Partition :-

Supplying and erecting full height partly glazed

partition as per drawing and conforming to the

following specification Basic Framework:- Full height Solid partition with

kapur wood frame of C.S size 2" x 2" at required

spacing but not exceeding than 2'-0" x 2'-0". The

framework shall be treated with two coats of wood

preservative and fire retardant material

Skin Membrane:- The skin shall comprise of a

covering of 6mm thick BWR grade plywood

Finishing:- 1mm thick laminate of prescribed shade on

both sides. The groove between two laminate joint shall

not exceed 1.0 mm as or otherwise specified by the

architect.

Skirting:- The skirting shall be 4" high thick finished

with prescribed shade of laminate as per design.

SIZE

1.a.1 UP TO CEILING HT. SFT 240.00

1.a.2 UP TO 5'-6" HT. SFT 75.00

1.a.3 UP TO 4'-0" SFT 55.00

b Partially Glazed Partition :-

BUDGETARY ESTIMATE OF INTERIOR &FURNISHING WORK FOR KHAJUTTI BRANCH, BANK OF

BARODA



BARODA

Supplying and erecting full height partly glazed

partition as per drawing and conforming to the

following specification. Basic Framework :- kapur wood frame of C.S size 2" x

2" at required spacing but not exceeding than 2'-0" x 2'-

0". All the framework shall be coated with two coats of

wood preservative and Fire Retardant material.

Skin Membrane :- The opaque portion of the partition

(3'-0" from the finished floor level) as per design shall

be covered with BWR grade 6 mm thick ply on both

sides of the partition.

Finishing :-The opaque portion shall be covered with

1mm thick laminate of the prescribed shade .The groove

between two laminates shall be not more than 1mm.

Skirting:- The skirting shall be 4" high thick covered

with BWR grade 6 mm thick ply and finished with the

prescribed shade of laminate.

Glazing:- The transparent parts of the partition shall

comprise of 12 mm thick clear glass (etched as per

design) tightened in place with teakwood glazing bead

of approved shape and polishing the same with wood

polish of mahogany colour as per the instruction of the

architect. In case of Cash counters the glass shall have

hole for transaction of money and papers.

Edge Moulds:- All free top/ end surfaces shall have

teakwood moulds of approved shape (80 x 25 mm C.S)

finished with wood polish of mahogany colour. Rate shall include providing cutouts and provisions to run electrical conduits, switches etc. It shall a

SIZE

b.1 UP TO 5'-6" HT. SFT 45.00

b.2 UP TO 4'-0" HT. SFT 0.00

2 PANELLING FOR WALLS AND FREE

STANDING PILLARS:-

2.a Column Encasing (upto false ceiling level) works as

per drawing and conforming to the following

specification:

SFT 30.00



BARODA

Basic Framework:- Well kapur wood Sections treated

with two coats of wood preservative and Fire retardant

material of cross section size 2" x 1" at horizontal and

vertical spacing of not more than 2'-0" x 2'-0" c/c.

Skin Membrane:- Providing and fixing 6 mm thick

plywood of BWR grade as per drawing/ instruction.

Finishing:- 1 mm thick laminate of same or

combination shades as per drawing or instruction and

groove not more than 1 mm.

Skirting :- Providing and fixing of Malaysian Sal of

size 4" x 1" C.S and membraning the same with 4 mm

thick plywood of BWR grade and finishing it with 1

mm thick laminate of same or combination shade as per

instruction/ drawing.

Rate shall also include providing cutouts and provisions

to run electrical conduits, switches etc. The thickness of the partition may vary as per design and the rates shall include the changes in the thickness as well

2.b ACP PANEL

Encasement area for entrance doors and columns

with Aluminium Composite panel. Company :

Alstone. Till 2'-6" Height Colour Code VL-07/VL-04.

Colour Above 2'-6" Height till the false ceiling level

Colour Code VL-03 (For the Columns). For the Door

Encasement Colour Code VL-03. All the Aluminium

Composite panelling needs to be done with required

Aluminium Framework.

SFT 95.00

3 DOORS:-

a Solid Flush Door:- Supplying and fixing in position

overall 37 mm thick solid core hot pressed phenol

formaldehyde bonded approved flush door shutter

finished with 1 mm thick laminate sheet of approved

shade and colours with a groove of not more than I mm

in case of two different laminates colours. The rates

shall include the cost of door frame, hardware, bolt,

locks, hinges, handles etc.

3.a.1 Blocked door in entry toToilet&cash area, Pantry &

Store Room with vision panel (3'-0"x7'-0")

NO 3.00

`

3.a.2 Entry to cash and cash area door ( 3'-0" & 2'-3" x 5'-

6")

NO 2.00

3.a.3 Entry door to store room without etching ( 3'-0" x 4'-0") NO 0.00



BARODA

3.b Glazed Main Door:- Providing and fixing in position

of single leaf door shutter made out of 12 mm thick

float glass etched as per design. The other side of the

door shall have fixed glass as per design. The door shall

rotate on floor springs of ISI make on which the

shutters shall be pivoted at top and bottom. Door

handles shall of H-type of satin finish stainless steel

handlesThe rates shall include cost of door frame,

hardware, bolt, locks, hinges, handles etc. Door size: 4'-

0" x 7'-0". The rates shall include etching the Bank's

logo and emblem on the glass in the size and design as

prescribed by the architect.

sft 50.00

4 FURNITURES:-

4.a Providing and fixing of officer/ CSR desk made out of

19 mm thick BWR grade ply. The top shall be 25 mm

thick finished with prescribed shade of laminate. All

drawers and shelves shall be of 12 mm thick ply. All

exposed surface shall be of the prescribed shade of

laminates 1 mm thick and the internal portions of

drawers and cabinets shall be done with 0.8 mm thick

white laminates. Each table shall have one drawer of 4"

height and 1'-6 " wide and a tea tray above that as well

as a shelved and shutter cabinet below that . The table

shall as per design. The table size is of 5'-0" x 2'-6".

The height shall be 2'-6" standard. Placement of

drawers and shelves shall be as per design. All the ply

edges shall be lipped and finished with prescribed shade

of polish . The rate shall also include the cost for

hardwares like hinges, towerbolts, handles, magnets,

wire manager etc.

Nos. 1.00



BARODA

4.b Providing and fixing of Branch Manager's table made

out of 19 mm thick BWR grade ply. The top shall be 25

mm thick with prescribed shade of laminate All drawers

and shelves shall be of 12 mm thick ply. All exposed

surface shall be of the prescribed shade of laminates 1

mm thick and the internal portions of drawers and

cabinets shall be done with 0.8 mm thick white

laminates. Each table shall have one drawer of 4" height

and 1'-6" wide with a tea tray above and a shelved and

shutter cabinet below that . The table shall have CPU

tray (INNOFITT system or equivalent) and keyboard

tray (INNOFITT System or similar). The table size is of

5'-6" x3'-0". The height shall be 2'-6" standard.

Placement of drawers and shelves shall be as per

design. The side unit shall be 3'-0" in length and 1'-6"

wide with the standard height of 2'-6". The side unit

shall have shelves beneath with sliding shutters.All the

ply edges shall be lipped and finished with prescribed

shade of polish . The rate shall also include the cost for


wire manager etc.

Nos. 1.00

4.c Providing and fixing of clerical desk made out of 19

mm thick BWR grade ply. The top shall be 25 mm thick

finished with prescribed shade of laminate. All drawers

and shelves shall be of 12 mm thick ply. All exposed




laminates. Each table shall have one drawer of 4" height

and 1'-6 " wide and a tea tray above that as well as a

shelved and shutter cabinet below that . The table shall

have space for CPU tray (INNOFITT systems or

similar) and keyboard tray (INNOFITT systems or

similar) as per design. The table size is of 4'-0" x 2'-0"".

The height shall be 2'-6" standard. Placement of

drawers and shelves shall be as per design. All the ply

edges shall be lipped and finished with prescribed shade

of polish . The rate shall also include the cost for


wire manager etc.

Nos. 1.00



BARODA

4.d Providing and fixing of Cash Counters made out of 19

mm thick BWR grade ply. Working counter side : The

Height of this side shall be 2'-6" All drawers and

shelves shall be of 12 mm thick ply. All exposed




laminates. Each table shall have set of 3 drawers1'-6"

width on slide channels on one side . The table shall

have CPU tray on the other side and akeyboard tray

(INNOFITT system / similar). The table size is of 4'-0"

x2'-0". The portion projecting on the customer side

shall be 10 " deep and have intermediate shelf 12 mm

thick shall have 2 sets of sliding shutter and a locking

arrangement for keeping currency note. customer

transaction side: The top shall be at a finished of (ht. 3'-

8") , 1'-6" wide and projecting 6" on the customer side.

This top shall be finished with 18 mm thick

Granite(Red) moulded as per instruction above a 19

mm ply and the total height includes this granite top.

The space between the working counter side and customer transaction side is utilized from the working side for keeping currency notes. The panel thus framed shall be finished with 1 mm thick laminate from outside and completed as per the instruction of the

NO 1.00

All the ply edges shall be lipped and finished with

prescribed shade of polish and the glass edge shall be

polished and bevelled. The rate shall also include the

cost for hardwares like hinges, towerbolts, handles,

magnets, wire manager etc. Note that the portion above

the 3'-8" partition shall have glass with a hole for

money and paper transaction.

RFt. 0.00



BARODA

4.e Providing and fixing writing ledge consisting of 25 m

thick BWP grade ply at base finished on all faces with 1

mm thick laminate, 5 mm thick glass partitions at

approx 150 mm c/c fixed on base with D brackets for

keeping withdrawal/ deposit forms and 8 mm thickened

toughened glass on top with help of studs all complete

as per drawings (approx width 300 mm). A cheque drop

box of size 2' x 2' x 6" with 1" wide slit for inseting

cheques made of 19 mm thick BWP grade ply finished

with 1 mm thick laminate of prescribed shade. The

inside of the box shall be painted with prescribed shade.

Nos. 1.00

4.f STORAGE

Providing and fixing of low height storages (height till

2'-6") made out of 19 mm thick BWR grade ply finished

with 1 mm thick laminate outside and 0.8 mm thick

laminate from inside. All the intermediate shelves shall

be 12 mm thick BWR grade plywood. The shutter shall

be of BWR grade blockboards of sliding types fixed

with sliding channels. The vertical divisions of the

storages shall be as per instruction/ drawings. Free

edges shall be lipped and polished with prescribed

colour shade of polish. The rates shall include sliding

handles, sliding channels and locks etc.

SFT 40.00

4.g General chairs with handle for front office, back office,

cash area and clients of Methodex or equivalent make .

The upholstery shall be of black rexin.

Nos. 3.00

4.h Executive High back upholstered chairs for Branch

Manager (Methodex Make or equivalent)

Nos. 1.00

4.i General still chairs with out handle for customer Nos. 6.00

4.j Multi seater for customer waiting area of approved

make (3 seater)

Nos. 2.00

5 FALSE CEILING :-

ARMSTRONG



BARODA

5.a Providing , fabricating and erecting lay in type tegular

or drop type ARMSTRONG false ceiling of 600 mm x

600 mm grid with approved brand of armstrong. The

rate shall include the additional cost of Tee and L

supports and other accessories near the ends/ odd size

edges/corners. Provide additional length support from

the ceiling to the false ceiling grid wherever necessary,

making necessary openings for electrical light fittings,

alarm detectors and any other fixtures. No extra

payment for making openings in the panel/grids for the

purpose of light fittings. Item rate shall include all the

taxes, transportation, erection, loading and unloading

and any other incidental expenditure for completing the

work.

SFT 0.00

5.b Providing and fixing in position dropped ceiling in two

levels including vertical surfaces in between two level

of ceiling surface with 12.5mm thick tapered edge

gypsum board conforming to IS 2095 including

providing and fixing of framework made of special

sections power pressed from MS sheet and galvanised

in accordance with Zinc coating 600 as per IS 277 and

costing of angle cleats of size 25mm wide x 16mm

yhick with flanges of 22mm and 37mm at 1200mm

center to center one flange fixed to the ceiling with dash

fastner 12.5mm dia x 40mm long with 6mm dia bolts to

the angle hangers of 25x25x5mm of required length and

other end of angle hanger being fixed with nut and bolts

SFT 0.00

6 MISCELLANEOUS:-

6.a Providing and laying Kota stone platform of 19 mm

thick and 2'-0" wide and at 2'-8" high above finished

floor level with machine polished edge in the pantry.

The rate shall include the profile cutting and fixing of

below counter sink and polishing the exposed edges of

the stone. A 2" kota stone shall be provided below the

moulded edge.

RFt. 18.00

6.b Providing of stainless steel sink, faucet and trap fixing

in the pantry and wooden overhead cabinet made out of

19 mm thick BWR grade ply and finished with 1mm

thick laminate of prescribed shade and all open edges

finished with lipping and polished with prescribed

polish colour

Ls. 1.00



BARODA

6.c Providing and fixing of vertical blinds (PVC coated

polyester Fabric) of approved shade and colour as per

the instruction of the architect tailored to the size of the

window

SFT 80.00

6.d Providing and fixing in position frameless double

acrylic sheet 2'-6" x 1'-6" mounted with mirror screws

on the walls along with all accessories complete for

display of bank's schemes, posters and notices.

No. 2.00

6.e Providing and fixing of pin up notice board made of

soft cork board finished with fabric as approved

matching with the colour scheme with a wood moulding

of prescribed shape all around the edges.

Sq.Ft. 20.00

7 12 mm GLASS PARTITION:-

Providing and fixing in position 12mm thk machine

polished glass at top of Cash counter front.Necessary 1

1/2" x1/2" white beech/white ceader moulding with

natural polish to be provided. The work to be completed

in all respect as per design , direction and approval of

Architect.

SFT 15.00

8 SYNTHETIC DOOR MAT :-

Providing and fixing synthetic door mats of approved

shade from Birla 3M( 6mm thk).The work to be

completed as per approval of the Architect.

NOS 0.00

9 SUGGESTION BOX:-

Providing and fixing suggestion box made out of 19mm

block board and finished with 1.0mm thk laminate &

inside to be synthetic enamel painted.A 1" high slit &

small door with key and locking arrangement to be done

for dropping & taking out the slips.The work to be

completed as per design,direction & approval of the

architect.

NO 1.00

10 CHEQUE DEPOSIT BOX:-



BARODA

Providing and fixing cheque deposit box made out of

19mm thk block board & finished with 1.0mm thk.

Laminate & inside to be synthetic enamel painted.a 1"

high slit & small door with key and locking

arrangement to be done for dropping & taking out the

slips.The work to be completed as per the

design,direction & approval of the architect.

NO 1.00

11 FIRST AID BOX:-

Providing & fixing in position first aid box made out of

19mm thk. BWR block board finished with 1.0mm thk.

Laminate.Inside to be enamel painted.all exposed edges

to be covered with white beach/white cedar lipping with

natural polish.Necessary hardware like multipurpose

lock, brass hinges and handle to be provided.The work

to be completed as per the direction & approval of the

architect.

NO

12 MAIN PANEL ENCASEMENT :-

Providing & Fixing main panel encasement in position

fabricated out of 19mm BWR BB with 1.0mm thk.

Laminate for top,both sides&front.Encasement will be

having powder coated alluminium louver & 6mm thk.

Glass for seeing the indicator in both pallahs.The

exposed surface of 19mm BWP BB will be finished

with white beach/white ceader lipping & inside to be

enamel painted . The item to be completed in all respect

as per design , direction and approval of the Architects.

SFT 40.00

13 ANTI - STATIC PVC FLOORING:-

Providing and laying 2mm thk. anti - static PVC

flooring in UPS/Server and strong room of approved

colour on the existing floor with adhessive. The floor

should be clean,smooth,level,dry and free from oil, The

item to be completed in all respects as per design,

direction and approval of the Architect.

SFT 0.00

TOTAL - A

SL. PARTICULAR Unit Qty Rate Amount

1 PANEL & DISTRIBUTION BOARDS.

1.1

Supplying, Fabricating, assembling, inter-connecting,

testing and connecting with incoming and outgoing power

cables and lines as required to comlete the job of CUBICAL

TYPE ELECTRICAL PANEL made from 14 SWG CRC

M.S sheet with proper earthing terminal(Nut-bolt and

washer)-02 nos. outside panel, same nut-bolt to tighten with

internal earth bus-bar of panelsituated inside loose wire box

(on top portion of the panel). On top side of the panel, cable

entry arrangement is to be done for incoming and outgoing

of lines. One 6" x 4" enamel type 440 Volts danger board to

be fixed on the main panel busbar cover. All switches are

front handle operated and all MCB knob should be visible.

All componenets are to be provided in separate

compartment and only DBs in one compartment. The main

componenets are

Nos 1

1.1.1 100 AMPs MCCB, 35 Kva as main - 1 set

1.1.2 100 AMPs 4 Pole Cu. Busbar - 1 set

1.1.3 63 AMPs 4pole change over switch - 1 no

1.1.4 63 AMPs 4 Pole MCCB as DG & main incomer- 2 nos

1.1.5 40 A D.P MCB (For 5 Kva Ups) - 2 nos

1.1.6 25 Amps SP MCB : 6 Nos. , 16 Amps. SP MCB 6 Nos.

1.1.7 10 Amp SP MCB : 6 Nos.

1.1.8 16 AMPs DP MCB as glow sign board main - 1 no

1.1.9

Ammeter 0-100 A with 3 Nos. CT & selector switch 96 x

96 mm-01 set (A.E make) (CT ratio 100/5) A.E. make - 1

set

1.1.10Voltmeter-0-500 Volt A.C. 50 Hertz 96 x96 mm with

selector switch (A.E make)-01 set

1.1.11 22 mm dia LED indicator Lamp - 6nos

1.1.12 02 AMPs sliding fuse - 6 set

1.1.13150 x 100 mm enamel danger board 440 Volt(to set on bus

bar cover) - 1 no

1.2

Supply and fixing of 100 AMPs TPN HRC type SFU at

WSEB for main incoming on MS angle frame and 02 nos.

cable end box including connection complete with wire, lug,

pvc tape

Nos 1

1.3

Supplying, installation and Termination of UPS out-going

power distribution system with 12 way SPN DB comprising

of 10A SP MCB : 10 nos. and 32 AMPs DP RCBO 300

MA as main (MDS make) IP-42 protection with double

door. Power is to be taken from existing DB.

Nos 2

1.4Supply, installation and termination of 40 Amp DP MCB

DB 8 way in ATM Nos 1

2 CABLES AND CABLE END TERMINATION

2.1Supply & Fixing 3.5 C X 35 Sqmm Al. Ar. Cable From

Meter room to Panel including cable End TerminationMtr 10

2.2Supply & Fixing 3.5 C X 35 Sqmm Al. Ar. Cable From DG

to Panel including cable end termination.Mtr 50

2.3Supply & Fixing 3.5 C X 25 Sqmm Al. Ar. Cable From

panel to power DB including cable end termination. Mtr 10

2.4Supply & Fixing 4.0 C X 10Sqmm Al. Ar. Cable From

Panal to Lighting DB including cable end termination.Mtr 60

BUDGETARY ESTIMATE OF ELECTRICAL WORKS FOR KHAJUTTY BRANCH, BANK OF

BARODA



BARODA

2.5

Supply & Fixing 3.0 C X 6 Sqmm Cu. PVC Insulated wire

in PVC Conduit (from panel to UPS) including cable end

termination.

Mtr 25

2.6

Supply & Fixing3.0 C X 6 Sqmm Cu. PVC Insulated wire

in PVC Conduit (from UPS to UPS DB) including cable

end termination.

Mtr 60

3

3.1

Wiring for Light Point with 20 mm PVC pipe with

2x1.5 Sqmm wire and 1x1.5 Sqmm green earth wire for

light Points as reqd. complete with modular switch with

front plate

3.1.1 One light controlled by 6A switch Nos 12

3.1.2 Two light controlled by 6A switch Nos 6

3.1.3Exhaust fan point with 6 A sw complete with modular

switch plate & M.S conceal box & 3 pin ceiling roseNos 4

3.1.4

Fan point complete with modular switch plate & M.S

conceal box & 3 pin ceiling rose with electric regulator,

modular type.

Nos 5

3.1.5Call bell point with push type switch, modular plate & M.S.

conceal box with buzzer or ding dong type bellNos 2

4

4.1

Supply, laying of circuit line 2x2.5 sq.mm +1 x 1.5 Sq.mm

PVC insulated copper wire from MCB type lighting DB to

6 amp plug points (3 nos. 6 Amps plugs to be connected

from one circuit line)

Mts 130

4.2Modular type 6 A switch with 6A 5 pin socket . Mounted

on suitable front plateNos 8

4.3

Wiring for Power Point 6/16 A Switch & Socket with

25mm PVC pipe with 2x2.5 Sqmm wire and 1x1.5 Sqmm

green earth wire for Power Points as reqd. This line has to

be drawn from the power DB. (02 nos. plugs to be

connected with one circuit)

Mtr 90

4.4Modular type 6/16 A switch. with 16A 5 pin socket .

Mounted on suitable front plate Nos 4

5

5.1

Wiring for Power Point 6/16 A Switch & Socket with

25mm PVC pipe with 2x2.5 Sqmm wire and 1x1.5 Sqmm

green earth wire through PVC casing 20 mm dia 16 SWG

with ISI mark to lay from UPS MCB DB to plug point

board

Mtr 120

5.2

Supply and fixing of 2 x 6 Amps 5 pin socket + 1 x 16

amps 6 pin socket in single board (under table) + 1 x 16 A

switch (Modular switch + socket) in another board above

table as per direction

Set 6

5.3

Do- but 3 x 6/16 , 6 pin socket with three control switch to

provide near HUB Rack and line printer to be connected

from UPS power.

Set 3

5.4

Supplying, installation of UPS incoming 32 Amps industrial

socket with 32 Amps SPMCB (2 nos. for out going and 2

nos. for incoming) for 2 Nos UPS

Set 2

6 DATA/ TELEPHONE-LOW VOLTAGE SYSTEM

WIRING

RAW POINT WIRING-The wiring shall pass through PVC

UPS WIRING



BARODA

6.1

Supplying, laying and connection of telephone points with 2

pair .51 sq.mm tinned Cu conductor through PVC casing

ISI mark from telephone point to Krone DB complete with

RJ 11 telephone socket modular type in PVC concealed

box.

Nos. 3

6.2Do- 10 pair 0.51 sq.mm copper conductor telephone cable

in 20 mm dia PVC pipeMtr. 50

6.3

Supply, fixing and connection of 10 pair KRONE connector

DB complete with PVC moulded Telephone DB box with

locking system

set 1

7

7.1Supply and Fixing 580x580 Size 4x 14 Watts TLD Mirror

Optic Light Fittings.( Havells make ) LHCTP8424340Nos. 0

7.2Supply and Fixing of 1x36/40 Watts 4' length Slim Tube

Light for Coffer Lights (Havells Make) LHIF71104011Nos. 21

7.3

Supply and Fixing of Modular Downlighter of 170mm size

with 2x18 watts PL-C/ Model-LHOC33218399 including

electronic ballast

Nos. 0

7.4

9" heavy duty exhaust fan with louvre in toilet / pantry

inclusive of hole cutting in the wall and finished with

plastering complete

Nos. 4

7.5Wall Hung fan complete with all fitting and mending good

all damagesNos. 0

7.6Ceiling Hung fan complete with all fitting and mending

good all damagesNos. 5

8 Providing Change over switch for generator running Job 1

9

9.1Suppy & fixing of starter with 3 pin plug in recessed MS

box suitable for 1.5TR AC.Nos. 0

9.2Supply and Fixing in 25mm PVC Pipe with 3x 6 Sqmm

Cu. Cable For Single phase A/C Point Complete & reqd.Mtr 0

9.3

Supplying & Installing hi wall AC split unit (1.5 TR) with

rotary compessor of voltas make inclusive of all allied

works like outdoor stand,draing piping,wall chesing, cutting

copper & electrical wiring etc complete in all respect

Nos. 0

10

10.1

Supplying, laying of main line with 2 x 2.5 sq. mm + 1 x

1.5 sq. mm through pvc conduit from main panel to glow

sign board

Mtr 25

10.2Supplying , fixing of 16 Amps DP MCB at main entrance

with Glow sign board timer (24 hours in original housing)set 1

11

11.1Supply & Fixing 25 mm PVC Pipe with 8 SWG 2no,

Copper wire for Earthing.Mtr. 25

11.2Supply & Fixing 25x 3 mm GI Earth Strip 2no,Earthpit to

Panal Mtr. 25

11.3

Supply & Fixing 20mm PVC Pipe with 4C x 1.5 Sqmm Cu.

Flexible. Cable for PIR Control ( From Control panal to

Each PIR Control Only Cabling)

LS 1

AIR CONDITIONER

GLOW SIGN BOARD

EARTHING

FIXTURES INCLUDING LAMPS.



BARODA

11.4

Providing and making earthing station complete with

300x300x3 MM Cu Plate Complete with salt coal and

watering pipe Complete with chamber as reqd.

Nos. 2

TOTAL

SL

NO.PARTICULARS AMOUNT

A FURNISHEING WORKS

B ELECTRICAL WORKS

C

GRAND TOTAL

BUDGETARY ESTIMATE FOR PROPOSED BANK OF BARODA - KHAJUTTI BRANCH

SUMMARY SHEET (ABSTARCT)

bank of baroda · day to day supervision & coordination of the work at site. ... 6 250 volt 6...

Documents