single and three phase modular automatic transfer switch
TRANSCRIPT
Single and three phase modular Automatic Transfer Switch from 40 to 160 A
SWITCH TO INNOVATION
NEW
SINGLE P
HASE
References
ATyS M 3s ATyS M 6s
ATY
SM
023
A
ATY
SM
024
A
230 Vac40 A 1323 400463 A 1323 400680 A 1323 4008100 A 1323 4010125 A 1323 4012160 A 1323 4016
230 / 400 Vac40 A 1354 400463 A 1354 400680 A 1354 4008100 A 1354 4010125 A 1354 4012160 A 1354 4016
127 / 230 Vac40 A 1353 400463 A 1353 400680 A 1353 4008100 A 1353 4010125 A 1353 4012160 A 1353 4016
> 4 pole
ATyS M 6e
ATY
SM
022
A
230 / 400 Vac40 A 1364 400463 A 1364 400680 A 1364 4008100 A 1364 4010125 A 1364 4012160 A 1364 4016
230 / 400 Vac40 A 1384 400463 A 1384 400680 A 1384 4008100 A 1384 4010125 A 1384 4012160 A 1384 4016
127 / 230 Vac40 A 1383 400463 A 1383 400680 A 1383 4008100 A 1383 4010125 A 1383 4012160 A 1383 4016
127 / 230 Vac40 A 1363 400463 A 1363 400680 A 1363 4008100 A 1363 4010125 A 1363 4012160 A 1363 4016
Without communication With communication
ATyS M 3s ATyS M 6s
ATY
SM
200
A
230 Vac40 A 1323 200463 A 1323 200680 A 1323 2008100 A 1323 2010125 A 1323 2012160 A 1323 2016
230 Vac40 A 1353 200463 A 1353 200680 A 1353 2008100 A 1353 2010125 A 1353 2012160 A 1353 2016
> 2 pole
SOCOMEC: intelligent changeover systemsAs a worldwide leading company in changeover power solutions, SOCOMEC brings a new innovative changeover concept based on switch technology dedicated to single phase or three phase replacement and safety power supply applications from 40 to 160 A.
ATyS M: fully integrated control and automatic changeover functionsSOCOMEC has developed a new concept combining the benefits of switching technology and fast operation with unique control flexibility.
ATyS M: a specific response to IEC or EN 60947-6-1 changeover switching standardsThe new ATyS M modular changeover system has been designed, tested and proven according to the criteria in the international standard IEC 60947-3 and 60947-6-1. Its compli-ance with this standard guarantees a quality product which meets switching and changeover applications requirements.
AP
PLI
184
A
Additional Socomec changeover & by-pass solutions
The fully integrated ATS solutionThe best of switching and control technology dedicated to changeover applications
SWITCHING
Two mechanically interlocked power switches.
OPERATION
A configurable automatic control associated with an emergency manual operation.
MONITORING
A built-in configuration and control interface, simple or advanced.
INSTALLATION
A modular product adapted to any type of enclosure integration.
ATyS M 3s ATyS M 6s ATyS M 6e
160 A
ATY
SM
200
A
ATY
SM
023
A
ATY
SM
024
A
ATY
SM
201
A
ATY
SM
022
A
40 A
TrAnSfEr SWITCh
DuAl pOWEr Supply
InTEgrATED COnTrOl rElAyS
COMMunICATIOn*
TrIppIng*** Special version. ** Return-to-zero without external power source.
Mains Backup
ø ø
ø ø
ø ø
ø ø
….....................
...............................
.........................................
ø ø.............................
From 40 to 160 A From 125 to 3200 A
SIRCO M 8 P SIRCOVER 8 P*
ATyS M ATyS 6e
Changeover switch SIRCO M (I-0-II) SIRCOVER
Changeover switchSIRCO M (I-0-II) SIRCOVER*
SIRCOVER BypASS12 + 4 pole
*
G
> An ATS by-PASS range > An extended ATyS range up to 3200 A*
> SIRCOVER manual changeover range
> A BY-PASS range
* Also available in offer in enclosure.
ATY
S 1
02 B
CO
MU
T 03
4 A
UPS
SV
R 0
59 A
Innovation dedicated to automatic transfer applications
An optimised switching system
> Switching technology
• An on load switch disconnector providing safety isolation combined with high making and breaking characteristics.
• Safety isolation.• Stable positions.
> A new switching module combining
• High dynamic withstand.• Fast operation.• High number of operations.
Operation
> Automatic / Manual operating mode selection via the protective sealable cover
> Operation using a standard allen key.
> Padlocking func-tion configurable in position 0 or in all three positions I - 0 - II.
> Two power switches
Mechanically and electrically inter-locked.
SIISI
ATY
SM
002
B
Fast electrical operation
> Electromagnetic control
Enables fast I <–> II switching oper-ation < 180 ms.
> An available energy storage device
Enables return to 0 position feature upon loss of network without any power source available (ATyS M 6e).
ATY
SM
037
A
Flexible integration
> Enclosed offer
ATY
SM
038
A
ATY
SM
014
B
ATY
SM
015
B
ATY
SM
016
B
A dedicated control interface
Source failure
Automatic mode (AUT)
End “t” source 1 failure
Source availability
Generator shutdown
Semi automatic mode
Source availability
End “t” source 2 availability
End “t” stop to position 0End “t” source 1 availability
End “t” stop to position 0
End “t” cool down timer before generator
no
yes
Source 1 : priority power sourceSource 2 : backup power source “t” : timer
2
1
1
Example (generator application):
Switch to position 0
Switch to position II
Switch to position I
Switch to position 0
Manualoperation
Generator start
A dedicated control logic
ATY
S 0
28 E
GB
> ATyS M 6e: advanced and programmable
fully programmable automatic transfer switch cycles ensuring position stability or return to 0 position feature upon loss of network.
ATY
SM
030
B
> ATyS M 6s: simple and ergonomic
Configurable automatic transfer switch cycles, with stable positions.
ATY
SM
031
B
> ATyS M 3s: remote controlled
ATY
SM
029
B
ATY
SM
202
AAT
YS
M 2
03 A
Single phase Three phaseATyS M 3s ATyS M 6s ATyS M 3s ATyS M 6s ATyS M 6e
40 A 1823 2004 1854 2004 1823 4004 1854 4004 1884 400463 A 1823 2006 1854 2006 1823 4006 1854 4006 1884 400680 A 1823 2008 1854 2008 1823 4008 1854 4008 1884 4008100 A 1823 2010 1854 2010 1823 4010 1854 4010 1884 4010125 A 1823 2012 1854 2012 1823 4012 1854 4012 1884 4012160 A 1823 2016 1854 2016 1823 4016 1854 4016 1884 4016
ATY
SM
196
A
IP54.
CO
FF 3
66 A
IP3x.
Changeover switching for industrial and commercial low voltage applications
ATyS M 3s ATyS M 6s ATyS M 6e
Electrical operation I - 0 - II Automatic product Automatic product
APPLICATIONSNormal / Back-up without automatic controller •
Normal / Back-up with built-in automatic controller • •Stable positions • • •Load changeover •
FuNCTIONSSupplyExternal •
Integrated • •OpErATIOnBack-up manual operation of the 3 positions, configurable
• • •
Electrical (dry contact) control of positions I, 0 and II
• •*
Automatic control of positions I, 0 and II • •Return to 0 position feature upon loss of source •
MOnITOrIng3 voltages on networks I and II • •Frequency on networks I and II • •Phase rotation on networks I and II •Asymmetry of networks I and II •
AuTOMATIC COnTrOllEr COnfIgurATIOnBy potentiometer and micro-switch •By screen + keyboard •Vn, Fn, V threshold, F threshold • •Driving with or without priority • •Adjustable operating timers • •Control type (impulse or switch / contactor) •
DISplAyPosition, fully visualised breaking • • •Leds: source status, automatic mode, fault • •Leds: switch positions, supply, tests, control •V, F, timers, number of operations, last event •
rEMOTE COnTrOlOutputsGenerator set start / stop control • •Product available (not fault and not manual mode) • •*Programmable output (source, availability, fault) •*
InputsTest on load • •*Retransfer • •*Automatic mode inhibit • •*Other programmable inputs (test off-load, position control, etc.)
•*
Remote controlHuman / Machine Interface (ATyS D10 or D20) •RS485 communication (JBUS / MODBUS) •**
* 3 inputs / 3 outputs (programmable). ** Product reference is different: the communication by connection RS485 (JBUS / MODBUS) allows to connect until 31 ATyS M with a PC or a programmable machine over 1500 m.
Six ratings 40 / 63 / 80 / 100 / 125 / 160 A 2 or 4 pole
A product for all changeover applications from 40 to 160 A
> Generator Network / Set
• generator set control
Non-criticalloads
ATyS M 3sGS
Criticalloads
UPS
ATY
SM
003
C G
B
• ATS solution
Non-criticalloads
ATyS M 6sATyS M 6e GS
Criticalloads
UPS
ATY
SM
004
C G
B
> Network / Network
• Building services
ATyS M
ATyS M
ATY
SM
005
D Non-criticalloads
ATyS M 6e
Criticalloads
UPS
ATY
SM
006
D G
B
Réf
. DO
C 6
7073
- 0
9/11
- P
hoto
: Mar
tin B
ernh
art -
Réa
lisat
ion:
SO
CO
MEC
Ser
vice
Com
mun
icat
ion
- G
yss
Impr
imeu
r Obe
rnai
- T
o he
lp p
rote
ct th
e en
viro
nmen
t, th
is d
ocum
ent h
as b
een
prin
ted
on P
EFC
pap
er (P
rogr
amm
e fo
r the
End
orse
men
t of F
ores
t Cer
tifica
tion)
CO
UV
179
A
A complete range of accessories
> Single pole voltage sensing tap
provides two terminals per pole for voltage sensing or power supply requirements.It can be fitted on any pole keeping cable connection capacity complete.
ATY
SM
026
A
1399 4006
> Auxiliary contacts
Each product can be equipped with 2 auxiliary contacts. I t i n t e g r a t e s o n e n O / n C c o n t a c t p e r position (I, 0, II).Characteristics: 250 VAC / 5A maximum.
ATY
SM
028
A
1309 0001
> Terminal shrouds (pair)
provides protection against direct contact with the connection terminals or parts.A specific front hole enables access to terminals’ t ighte-ning screws for thermographic measurement or voltage sensing.
ATY
SM
027
A
2294 4016
> Sealable cover (for ATyS M 6s)
Controls settings cover to avoid ATyS M 6s parameters access due to a sealable facility.
ATY
SM
199
AA
TYS
M 0
43 A
1359 2000
1359 0000
> Remote interfaces ATyS D10 or D20 (for ATyS M 6e)
To display source availability and changeover state on the front of a panel.rJ45 cable connection.
ATY
S 5
65 C
ATY
S 5
64 C
1599 2010 1599 2020
> Bridging bars
A dedicated, compact accessory providing changeover output common point keeping cable connection capacity complete (protection index Ip2X).
ATY
SM
025
A
40 to 125 A: 1309 2006160 A: 1309 2016
40 to 125 A: 1309 4006160 A: 1309 4016
ATY
SM
198
A
Single phase
Single phase
Three phase
Three phase
VALID FOR FRANCE
h E A d O f f I C ESOCOMEC GROUPS.A. SOCOMEC capital 11 149 200 €R.C.S. Strasbourg B 548 500 149B.P. 60010 - 1, rue de Westhouse F-67235 Benfeld Cedex - FRANCE
I n t E R n A t I O n A L S A L E S d E p A R t M E n tSOCOMEC1, rue de Westhouse - B.P. 60010 F - 67235 Benfeld Cedex - FRANCETel. +33 (0)3 88 57 41 41 - Fax +33 (0)3 88 74 08 [email protected]
Socomec worldwide
I n E U R O p E
BELGIUMSOCOMEC BELGIUM B - 1190 Brussel Tel. +32 (0)2 340 02 30 - Fax +32 (0)2 346 28 99 [email protected]
FRANCESOCOMEC F - 94132 Fontenay-sous-Bois Cedex Tel. +33 (0)1 45 14 63 30 - Fax +33 (0)1 45 14 63 38 [email protected]
GERMANYSOCOMEC GmbH D - 76275 Ettlingen Tel. +49 (0)7243 65 29 2 0 - Fax +49 (0)7243 65 29 2 13 [email protected]
ITALYSOCOMEC Elettrotecnica s.r.l. I - 20098 San Giuliano Milanese (MI) Tel. +39 02 9849821 - Fax +39 02 98243310 [email protected]
SPAINSOCOMEC ELECTRO, S.L. E - 08310 Argentona (Barcelona) Tel. +34 93 741 60 67 - Fax. +34 93 757 49 52 [email protected]
ThE NEThERLANDSSOCOMEC B.V. NL - 3991 CD Houten Tel. +31 (0)30 760 0901- Fax +31 (0)30 637 2166 [email protected]
ThE UNITED KINGDOMSOCOMEC Ltd Hitchin Hertfordshire SG4 0TY Tel. +44 (0)1462 440033 - Fax +44 (0)1462 431143 [email protected]
I n A S I A
NORTh EAST ASIASOCOMEC CHINA CN - 200030 P.R.C Shanghai - China Tel. +86 (0)21 5298 9555 - Fax +86 (0)21 6228 3468 [email protected]
SOUTh EAST ASIA & PACIFICSOCOMEC SWITCHING AND PROTECTION UBI TECHPARK - 408569 Singapore Tel. +65 65 07 94 90 - Fax +65 65 47 86 93 [email protected]
SOUTh ASIASOCOMEC INDIA 122001 Gurgaon, Haryana - India Tel. +91 124 4562 700 - Fax +91 124 4562 738 [email protected]
I n M I d d L E E A S t
UNITED ARAB EMIRATESSOCOMEC Middle East Dubai, U.A.E. Tel. +971 (0) 4 29 98 441 - Fax +971 (0)4 29 98 449 [email protected]
I n n O R t h A M E R I C A
USA, CANADA & MEXICOSOCOMEC Inc Cambridge, MA 02142 USA Tel. +1 617 245 0447 - Fax +1 617 245 0437 [email protected]
www.socomec.comNon contractual document. © 2011, Socomec SA. All rights reserved.
4e_couv_SCP_rouge_2011.indd 6 22/08/11 10:15