baldwin1 physics mr. baldwin geometric optics 21-may-15 aim: what does a spoon or pencil look like...
TRANSCRIPT
BALDWIN 1
PHYSICS Mr. BALDWINGEOMETRIC OPTICS Apr 18, 2023AIM: What does a spoon or pencil look like in a
clear glass of water?DO NOW:
1. If an object is located on the reflective side of a mirror, is it’s distance positive or negative?
2. If an image is located on the reflective side of a mirror, is it’s distance positive or negative?
3. If the focal point of a mirror is located on the reflective side of a mirror, is it’s distance positive or negative?
Refraction: Snell’s Law
Light changes direction (bends) when crossing a boundary from one medium to another. This is This is called Refractioncalled Refraction.. The angle the outgoing ray makes with the normal is called the angle of refractionangle of refraction.
Refraction: Snell’s Law
Refraction is what makes objects half-submerged in water look odd.http://interactagram.com/physics/optics/refraction/
Index of Refraction
Light slows when traveling through a medium. The index of refraction, n, of the medium is the ratio of the speed of light in vacuum to the speed of light in the medium:
BALDWIN 5
PHYSICS Mr. BALDWINGEOMETRIC OPTICS Apr 18, 2023
AIM: What is Snell’s Law? (How do we determine how much a light ray bends when it enters a medium?)
DO NOW:
1. A ray of light enters into a piece of plexiglas. The refractive index of plexiglas is 1.51. What is the speed of light when it enters the plexiglas? Take the speed of light to be 3.0 x 108 m/s.
Homework: Refraction Handout
Refraction: Snell’s Law
The angle of refraction depends on the indices of refraction, and is given by Snell’s law:
Using Snell’s law, what is the refracted angle?
Snell’s Law
When a ray of light crosses from one material to another, the amount it bends depends on the difference in index of refraction between the two materials.
BALDWIN 8
PHYSICS Mr. BALDWINGEOMETRIC OPTICS Apr 18, 2023
AIM: How does light travel in a fiber optic cable? (An application of Snell’s Law)
DO NOW: (Quiz)
1. A ray of light enters into a diamond at 30 degrees. The refractive index of diamond is 2.42. What is the speed of light when it enters the diamond and what is the refracted angle? Take the speed of light to be 3.0 x 108 m/s.
Homework: None
Total Internal Reflection; Fiber OpticsIf light passes from one medium into another medium with a smaller index smaller index of refraction, IS the angle of refraction larger or smaller?
LARGER
There is an angle of incidence that will make the angle of refraction equals 90°; this angle is called the critical angle.
Thus, derive an expression for the critical angle using Snell’s Law.
Total Internal ReflectionIf the angle of incidence is larger than this (critical angle), no transmission occurs. The light is trapped. This is called total internal reflection.
Based on the diagram, which letter represents TIR?
Challenge.
1. Fused silica has a refractive index of 1.46. Calculate its critical angle.
2. The critical angle for diamond is 24o. Determine the refractive index of diamond.
3. Find the subsequent paths of rays of light incident internally on the surface of fused silica at angles of incidence of:
(a) 35o
(b) 65o
Describe an application of total internal reflection used in the communications industry.
Application of Total Internal Reflection: Fiber Optics
Total internal reflection is also the principle behind fiber optics. Light will be transmitted along the fiber even if it is not straight. An image can be formed using multiple small fibers.
Total Internal Reflection: Binoculars
Binoculars often use total internal reflection; this gives true 100% reflection, which even the best mirror cannot do.
WORKSHEET No.2:
1. Calculate the absolute refractive index for a clear plastic material, if the velocity of light
in the plastic is 2.5 x 108 ms-1. (1.2)
2. A ray of light in air is incident at an angle of 40.8o on the surface of the same plastic
material used in Q.1. Determine the angle of refraction in the plastic. (33o)
3. A ray of light passes from kerosene to glass. The angle of incidence of the light is 45.2o
and the relative refractive index from kerosene to glass is 1.08. Calculate the angle of
refraction in the glass. (41o)
4. Using relevant information from Q.3, calculate the absolute index of refraction of
kerosene if the absolute index of refraction of glass is 1.5. (1.39)
5. A ray of light passes from air into a glass prism at an angle of incidence of 35o. If the
angle of refraction in the glass is 23.7o, what is the speed of the light in the glass? (2.1 x 108
ms-1)
6. The absolute refractive index of water is 4/3 and that of glass is 3/2. Find the relative refractive index for light traveling from water to glass.
7. The critical angle for diamond is 24o. Determine the refractive index of diamond.
8. Fused silica has a refractive index of 1.46. Calculate its critical angle. (43.2o) Find the subsequent paths of rays of light incident internally on the surface of fused silica at angles of incidence of:
(a) 35o
(b) 65o
9. Describe an application of total internal reflection used in the communications industry.
10. For yellow light, the refractive index of glass is 1.6 and the refractive index of water is 1.2. Which of the following statements is correct?
(a) The wavelength of yellow light in glass is longer than the wavelength of yellow light in water.
(b) For the same angle of incidence, yellow light is refracted more by water than glass.
(c) Total internal reflection cannot occur when yellow light travels from water to glass.
(d) Light travels faster in glass than in water.
BALDWIN 16
PHYSICS Mr. BALDWINGEOMETRIC OPTICS April 18, 2023
AIM: How are images formed by plane mirrors?
DO NOW:1.How far inside a plane (flat) mirror do you
appear to be when you are standing in front of one?
2.How large is your image?
3. Is there anything else about your image you observe?
HOME WORK – Handout
The Ray Model of Light
Light very often travels in straight lines. We represent light using rays, which are straight lines emanating from an object.
Recall: What is The Law of Reflection?
Q: How are the angles measured again?
angle of incidence = angle of reflection
ri
A: The angles of incidence/reflection are the angles that are measured from the normal to the incident/reflected ray.
Reflection: Image Formation by a Plane Mirror
Q: What you see when you look into a plane (flat) mirror? Describe the image (its dimensions, its location)?
the image appears to be behind the mirror.
DRAWING A RAY DIAGRAM FOR A PLANE MIRROR
•For an object standing in front of a plane mirror, we can locate the image by extending
(extrapolating) two of the rays coming from the top of the object and finding their point of
intersection.
– .
• Thus we have found the position of the image, its magnification, and its orientation (whether it is inverted or upright).
• What can be said about the characteristic of an image formed by a plane mirror? (Describe the image?)
• Object/Image distances?
– The distance of the object from the mirror equals the distance of the image from the mirror.
• Image height? (magnification?)
– The image is the same height as the object, so the magnification = 1.
• Orientation?
– The image is upright.
How can an image lie behind a mirror hanging on a wall, when no light can reach that point?
Does light actually pass through the position where the image is located?– The light never gets behind the mirror at all, it just appears to
come from points behind the mirror as it is reflected.
– Since the light never actually passes through the point where the image is located, the image is called virtual.
VIRTUAL IMAGES
This is called a virtual image, as the light ray does not go through it (image).
Note: The distance of the image from the mirror is equal to the distance of the object from the mirror.
image distance = object distance
oid d
DESCRIBING THE PROPERTIES OF AN IMAGE USE SALT! S – Size of image (larger, smaller, same)A – Attitude of image (way image is oriented (inverted, upright?)L – Location of image T – Type of Image (real or virtual)
BALDWIN 27
PHYSICS Mr. BALDWINGEOMETRIC OPTICS April 18, 2023AIM: How do we construct a ray diagram for
a spherical mirror?DO NOW:
1.Describe the image formed by the security mirrors in your neighborhood bodegas, elevators, ATMs or in any department stores. What are their purpose?
2.What is S.A.L.T.?
HOME WORK – none
Spherical Mirrors
Spherical mirrors are shaped like sections of a sphere, and may be either reflective on the outside (convex) or reflective on the inside (concave).
Spherical MirrorsParallel rays striking a spherical concave mirror all converge at exactly the same point called the focal point. The distance from mirror to focus is called the focal length f
Spherical Mirrors
Using geometry, we find that the radius of curvature is twice the focal length:
fC 2
Images formed by Spherical Mirrors
We use ray diagrams to determine where an image will be. For mirrors, we use THREE key rays, all of which begin on the TOP of the object:
1. A ray parallel to the axis;
2. A ray after reflection it passes through the focal point;
3. A ray through the radius of curvature
DRAWING A RAY DIAGRAM
Principal AxisFocal Point
Radius of Curvature
Mirror
Object
Ray 1
Ray 2Ray 3Image
Question?...How would do you describe (SALT) the image?
• Size – Smaller, larger or equal?– Smaller than object.
• Attitude – Erect or Inverted?– Inverted
• Location – In front of or behind the mirror?– In front the mirror
• Type – Real or Virtual?– Real
Characteristics of Images Formed by Concave (Converging) Mirrors
If an object is inside the focal point, its image will be upright, larger, and virtual.
Formation of Images by Spherical Mirrors
The Mirror Equation: an equation that relates the object distance, image distance, and focal length of the mirror:
io ddf
111
Formation of Images by Spherical Mirrors
We can also find the magnification (ratio of image distance/height to object distance/height).
Note: The negative sign indicates that the image is inverted.
o
i
o
i
h
h
d
dm
BALDWIN 37
PHYSICS Mr. BALDWINGEOMETRIC OPTICS 10 January 2013AIM: How do we construct a ray diagram for a
Convex Mirror?
DO NOW:
1. Draw the ray diagram and describe the characteristics of an image formed by a concave mirrorconcave mirror if the object is placed betweenbetween the radius of curvature & focal point?
HOME WORK – Prepare for Test next week Friday
Characteristics of Images Formed by Spherical Mirrors
If the object is between the center of curvature and the focal point, its image is
• Larger, inverted, and real.
If an object is outside the center of curvature of a concave mirror, its image is
• Smaller, inverted, and real.
Characteristics of Images Formed by Convex (Diverging) Mirrors
For a convex mirror, the image of an object placed anywhere in front the mirror is ALWAYSALWAYS
• Virtual
• Upright
• Smaller
Review: Characteristics of Images Formed by Spherical Mirrors
Sign conventions: if the object distance, image distance, or focal length is on the reflective side reflective side of the mirror, its distance is positive, and negative otherwise.
Magnification is positive if image is upright, negative otherwise.
BALDWIN 42
PHYSICS Mr. BALDWINGEOMETRIC OPTICS Review
1.What is the distance from the focal point to mirror along the principal axis called?
2.Twice the distance from the focal point to mirror along the principal axis is called?
3.What is another name for a concave mirror?
4.What is another name for a convex mirror?
5.How do we construct a ray diagram?
6.What type of images are formed by a plane mirror?
BALDWIN 43
PHYSICS Mr. BALDWINGEOMETRIC OPTICS April 18, 2023AIM: How are images produced by thin
lenses?DO NOW: Quick Review1. What is the distance from the focal point to mirror
along the principal axis called?
2. Twice the distance from the focal point to mirror along the principal axis is called?
3. What is another name for a concave mirror?
4. What is another name for a convex mirror?
5. How do we construct a ray diagram?
6. What type of images are formed by a plane mirror?
Thin Lenses; Ray Tracing
Thin lenses are made of transparent materials whose thickness is small compared to their radius of curvature.
They may be either
(a)converging
(b)diverging.
CONVEX LENS
Parallel rays are brought to a focus by a CONVEX CONVEX (converging) lens (converging) lens (one that is thicker in the center than it is at the edges).
CONCAVE LENSA CONCAVE (diverging) lens CONCAVE (diverging) lens (thicker at the edges than in the center) make parallel rays of light diverge; the focal point is that point where the diverging rays would converge if extrapolated.
Thin Lenses; Ray TracingThin Lenses; Ray Tracing
Ray tracing for thin lenses is similar to that for
mirrors. We have three key rays:
1. One ray travels parallel to the principal axis parallel to the principal axis
2. A second ray passes through the focal pointthrough the focal point.
3. A third ray goes through the center of the through the center of the lens lens and is undeflected.
CONVEX LENSCONVEX LENS
For a CONVERCING LENS, we can use three rays; the IMAGE characteristics (real, virtual, upright, the IMAGE characteristics (real, virtual, upright, inverted, larger, smaller) are determined by the inverted, larger, smaller) are determined by the OBJECT’S locationOBJECT’S location.
How would you describe the previous image?
• S.A.L.T.• IMAGE is real, inverted, smaller and on the IMAGE is real, inverted, smaller and on the
opposite side of the lens.opposite side of the lens.
DRAWING A RAY DIAGRAM
Principal Axis Focal Point
Image
Concave Lens
Object
Ray 1
Ray 2
Ray 3
Focal Point
CONCAVE LENSCONCAVE LENS
Now, how would you describe the image formed by a concave lens?
For a DIVERGING LENS, we can use the same three rays; the image is the image is ALWAYSALWAYS UprightUpright VirtualVirtual Smaller and On same side of lens as object.Smaller and On same side of lens as object.
BALDWIN 52
PHYSICS Mr. BALDWINGEOMETRIC OPTICS April 18, 2023AIM: How do we determine the characteristics
of an image produced by a thin lens?(How do we use the lens equation?)
DO NOW: (In complete sentences)Define the focal length of a lens.
What happens to parallel rays of light as it passes through a concave lens?
What happens to parallel rays of light as it passes through a convex lens?
Which lens’ focal length is negative and why?HOME WORK – Handout
Magnification
The magnification is the ratio of the image distance (size) to the object distance (size)
00 h
h
d
dm ii
*Power of Thin Lenses
The power of a lens is the inverse of its focal length.
Lens power is measured in diopters, D. 1 D = 1 m-1
The power of a lens is positive if it is converging and negative if it is diverging.
The sign conventions are slightly different:The sign conventions are slightly different:
The focal length is positive for converging lenses and negative for diverging lenses.
1. The object distance is positive when the object is on the same side as the light entering the lens (not an issue except in compound systems); otherwise it is negative.
2. The image distance is positive if the image is on the opposite side from the light entering the lens; otherwise it is negative.
3. The height of the image is positive if the image is upright and negative otherwise.