b2b purchase february 2014

for Project Procurement

R.N.I No. MAHENG/2007/24192 February 1, 2014 • Pages 144 • `100 • Vol. 7 Issue 5 Mumbai ISSN 0975-3990www.b2bpurchase.com

Dream comes trueWill Monorail serve as one more lifeline for Mumbaikars?

An I-Tech Media Publication

MHEROAD FACADE CHEMIC A L S WATER ROOFINGVENTILATORS

16 36 64 68 74 98 114

ADMIXTURESADMIXTURES

[email protected]

6 B2B PURCHASE February 20146 B2B PURCHASE February 2014

CONTENTS

RCMME

CASE showcased its newly launched backhoe loaders and compactors at IRC ..... 16

Cat 320D2 excavators: easy on fuel, hard on dirt ....................................................... 18

Escorts EC6650: ease of operation, reliable ................................................................ 22

Dynapac CC385HF: perfect solution in road building ................................................ 24

JCB machines: high productivity with maximum operating economy ..................... 26

Greaves HTR: superior and sturdy ............................................................................... 30

Liugong CLG414BSIII motor grader: efficiency at its best ......................................... 32

Case B-Series Grader increases productivity efficiently ............................................ 34

ElectroMech tower cranes: safe, easy to use ............................................................ 36

SLX chain hoist is one of a kind ................................................................................... 38

Liebherr unveils truck- mounted concrete pump 37 R4 XXT ..................................... 42

Maco aims to be the best source for powered access platforms .............................. 44

Bridge Challenge ............................................................................................................ 48

Ready-to-use foam concrete plant for multiple applications ..................................... 52

Ingersoll Rand launches Ultra EL compressor coolant .............................................. 53

Volvo CE appoints Pal Infrastructure as its new dealer in North India ..................... 55

Where ‘E’ stands for ‘efficiency’ .................................................................................... 56

GMK6400: performance, productivity and comfort ..................................................... 57

Susumo offers new range of tunneling machines ...................................................... 58

JCB appoints Arjun Mirdha as new North American Chief......................................... 59

Dream comes trueWill Monorail serve as one more lifeline for Mumbaikars?

18 30

38 42

24

34

48

26

36

52 53

54 56

57 58

22

32

44

10

8 B2B Purchase February 2014

www.b2bpurchase.com

I-Tech Media Pvt Ltd, 15/2, Second Floor, Chandroday Co-Op Society, Swastik Park, CST Road, Chembur, Mumbai - 400071. (India)Tel.: +91-22-32682214 / 15

EDITORIAL-IN-CHARGE* Subhajit RoyEmail: [email protected]

EDITORIALDibyendu RoychowdhurySwati Rana

ADVERTISINGShrutika PatilEmail: [email protected]: +91-22-3268 2214/15 [email protected] Year (12 issues) ` 1,200/-

Printed and published by Radha N. Poptani on behalf of I-Tech Media Pvt Ltd and printed at Print Process, B 23, Royal Industrial Estate, Mumbai - 400031 and published from 1, Gayatri, Karumari Amman, Chheda Nagar, Chembur (West), Mumbai - 400089. Editor: Radha N. Poptani.

All rights reserved. While all efforts are made to ensure that the information published is correct, B2B Purchase holds no responsibility for any unlikely errors that might occur. The information on products and services / technology on offer is being provided for the reference of readers. However, readers are cautioned to make inquiries and take their decisions on purchase or investment after consulting experts on the subject. B2B Purchase holds no responsibility for any decision taken by readers on the basis of information provided herein. Tel.: +91-22-32682214/15, +91-9821667357

*responsible for selection of news under PRB Act

CONTENTSStructureSEJOT Fasteners making nuclear reactor safe ��60SKS Fasteners: preferred name in high-tensile fastener ��62Golden Turbovent combines natural and forced air ventilation system ��64Real Green Engineers popularising wind turbine roof air ventilators �� 66Secure Access Everywhere ��68SunGreen ventilators improved IAQ ��72Superior, aesthetically appealing roof and wall-cladding profiles from LYSAGHT ��74DION quality and aesthetics: perfect combination to match roofing needs ��76Radiant heat barriers for thermal comfort ��78Fiberglass insulation: safe to use ��82Sauerland infill board: world’s timber substitute for infill material ��84Nine Bearing UPVC windows and doors hardware: committed to quality ��88Kalzip TF profiles: combining unique facade design with optimum functionality ��91Aerolam Reflective Insulation: a step toward greener atmosphere ��92Ajanta doors: ideal for all types of construction ��93Satec Envir Engineering offering multi-storey fabricated buildings ��94Polyklad: preferred solution for steel buildings ��97

coatingSCAC: emerging player in admixture firmament ��98Fenomastic Hygiene to ensure hygiene & durability ��99Tips on maintaining floors ��100Admixture of new generation ��101Aura Series: new generation concrete admixture ��102Hindustan Coatings: specialty chemicals to protect surface ��106Centrilit NC: MC-Bauchemie’s solution to improve durability of concrete ��110Antirust solution for paint applicators, steel fabricators and rebars ��112

waterSolar submersible pumps: water supply solution in remote areas ��114MSL achieving seamless growth ��116Tijaria pipes making mark in diverse applications ��118Kirloskar installs water pumping system for Mundra UMPP ��122SFMC PPR pipes for mining application ��123Suraj produces stainless steel seamless & welded pipes, tubes, ‘U’ tubes and large diameter welded pipes ��125Lubrizol: committed for technological advancements in plumbing ��127Jain Irrigation signs MoU with TERI ��129

coSt inDeX 130

aD inDeX 140

60

64

68

74

92

106

94

122


Cover Story

It’s finally here! Eight years after being proposed and six years in the making, Mumbai Monorail finally made its public debut this month. Being first monorail in the country, Mumbai got its new mode of transport after long wait of 88 years.

In Monorail system, train runs on a narrow guideway beam, wheels of which are gripped laterally on either side of the beam. At its fastest, it will run at 80 kms per hour; the average speed is set at 65 kms per hour.

The newest urban transport features comfortable and uncluttered seating

arrangements, air-conditioned coaches with computer-based interlocking, and automatic fare collection system. There are elevators available at all stations. Escalator facility is expected to become functional within five months.

The Monorail currently operates on a nearly nine-kilometer path that runs north from Wadala to Chembur, two eastern suburbs, which has seven stations. Initially, the swanky Monorail with a passenger carrying capacity of 560 each vehicle, will run from 7 in the morning till 3 in the afternoon in a 15 minutes interval. The Mumbai

As Mumbai greets the country’s first monorail with enthusiasm, scepticism looms over its viability and capability

Dream comes true

Cover Story

12 g

Will Monorail serve as one more lifeline for Mumbaikars?

Cover Story


Metropolitan Region Development Authority (MMRDA) who owns Monorail will operate six trains in the first phase and another 10 will be added in the second. The project has been executed by a consortium of engineering major L&T and Scomi Group of Malaysia.

The second phase of Monorail is expected to complete by next year and is projected to carry an average of 7,400 passengers per hour, for a total of 125,000 commuters daily.

The project has long been claimed by the MMRDA as a high-tech solution to the city’s unmanageable traffic congestion. But there are debates that the newly opened transit system will do much to relieve the traffic problems. Is it really serving any purpose to the harried commuters of Mumbai?

On one side the Monorail fever has already gripped Mumbai but on the

other side it has raised few doubts. After its overwhelming inauguration the question arises how useful is phase one? Here we discussed some advantages and disadvantages Monorail shares.

AdvantagesFaster connectivity: The monorail has been designed to reduce the travel time between Wadala and Chembur by almost half, from 40 minutes at present to nearly 21 minutes.

Environment friendly: Monorail follows the lines of green transportation as its coaches move on rubber tyres on concrete beams, creating less noise and vibration during operation.

Safe and reliable: As monorails run around elevated tracks, there is absolutely no risk of cars getting stuck on crossings. Also, the doors of coaches will not open when the monorail is in motion. Adequate safety features have been incorporated to avoid mishaps from driver’s mistakes.

Also, reduced space between the coaches and platform

will diminish gap-related accidents.

DrawbacksRoutes pass unfrequented areas: Most of the Monorail stations do not have proper connectivity to other modes of transport. Stations like Wadala, Bhakti Park and Mysore Colony are on isolated spots where there is little chance of finding any other modes of transport.

Low passenger capacity: The declared capacity is just 560 passengers per train. The plan is to have 15 trains of four trains each, which will carry around 1.25 lakh people every day. In comparison, the Mumbai suburban railway carries 72.4 lakh commuters daily, while the Mumbai Metro One is expected to carry six lakh commuters per day on completion.

Economy: Being built at a cost of about ` 3,000 crore, the monorail cannot recover the CAPEX and OPEX from ticket sales alone with a ticket price of ` 5 - 11. Though today thousands of people are queuing up for joyride, it should not become a ‘white elephant’ in future.

Road aheadMMRDA is hurrying to complete the phase two of the project. When the entire monorail project is completed,

the total project cost is estimated to reach ` 3,000 crore. It

will be 20-km long

10 f

14 g

Combination of Innovative Technology, Superior Quality, Versatility, High Reliability, yet Compact and Cost effective in Operations.

R e liy at bil ia litu y

Q

Makes Concrete Sense


INDUSTRY UPDATERCMME

CASE showcased its newly launched backhoe loaders and compactors at IRCCASE Construction Equipment India displayed its recently launched ‘EX’ Series backhoe loaders and 1107 DX compactor at the 74th session of Indian Road Congress (IRC). The event provides a national forum for sharing of knowledge and pooling of experience on the construction and maintenance of roads and bridges, including technology, equipment, research, planning, finance, taxation, organisation and related policy issues. This year’s edition, which was held in Guwahati from January 18 to 22, was inaugurated by Ajanta Neog, Minister of Public Works and Urban Development of the Government of Assam.

The new CASE EX Series backhoe loaders, presented nationwide last November, was entirely developed in the country to match the specific needs of the Indian construction market. The new three models – the 770EX,

770 EX Magnum and 851 EX – with power ranging from 76 to 96 hp, stand out for their fuel efficiency, powerful performance, safety and reliability.

The EX Series is equipped with a powerful, reliable S8000 engine, developed by FPT Industrial. The engine features an air after cooler system that increases the density of the intake air, improving efficiency and decreasing fuel consumption. The powerful performance and fast response time makes it the most fuel-efficient engine in the market. More than 120,000 units of this proven FPT engine have been produced at the CNH Industrial manufacturing facility in Greater Noida to power equipment for a variety of applications, including agricultural tractors.

The CASE 1107 DX vibratory soil compactor completes the compactor

line-up which also includes the recently upgraded 752 tandem compactor and smaller 450DX. Available in three configurations to match all road needs, the CASE 1107 DX features a new water cooled turbocharged 105 hp engine that delivers better fuel efficiency and lengthens the operating life of the machine. The operator’s environment has been entirely redesigned for better visibility and serviceability, to provide safer, easier operating conditions.

The North East is a very important market for CASE, which is making continuous efforts in order to consolidate its leadership position and further strengthen its market share through the introduction of new technology and advanced products that enhance the business value of its offering to its customers. The newly launched EX Series backhoe loader with FPT engine has already proved to be the most fuel efficient in the Indian market, bringing customers’ exceptional fuel savings. In addition, in order to offer easy finance for its customers, CASE through its CNH Industrial Capital arm is offering funding of up to 90 per cent of the asset cost at attractive payment terms.

CASE Construction Equipment India’s dealer network with its numerous customer touch points in the North East is well equipped to support customers even in remote locations. The company ensures easy access to prompt, efficient sales and after-sales support for customers in Assam through two dealers based in Guwahati and Silchar that operate seven branch offices in strategic locations across the state. CASE also has 13 dealers covering the entire eastern market in West Bengal, Bihar, Jharkhand, Orissa and North East for additional support. n

Visit to CNH stall by Assam P.W.D Minister Mrs Ajanta Neog

Experience the next generation in portable lighting towers

LIGHTS

10ACRES

ALL ELECTRIC

MASTSETUP

WELDINGWITH ALL

LAMPSON

SUPERIORENGINESAFETYSYSTEM

For more information on our DAZZLER® lighting towers Phone: +91-91584-92000 Email: [email protected] Website: www.lightingtowers.in

Lighting Towers Pvt. Ltd.

Olikara

APPLICATIONSroads, mining, airports, sea ports, railway repairs, accident sites, events, and many more

DA LERportable lighting towers

PATENT PENDING


PRIME FOCUSRoad Building Equipment

Cat’s most innovative road building equipment feature versatile boom and stick reinforced with internal baffled plates. They also come with sealed, lubricated rollers and idlers in track roller frame. Ajay Shankar talks about Cat’s proven technology that creates excavators keeping customers’ in mind.

Cat 320D2 excavators: easy on fuel, hard on dirt

“With an array of new features including new engine systems, 320D Series 2 offers a best value proposition that customers can look for,” says Ajay Shankar, Country Manager, Caterpillar India

Manufactured for customers’ benefitCat 320D2 excavators are designed and manufactured keeping customers’ in mind. With a robust engine that works with low pressure fuel system with an electric governor, 320D2 is suited for areas where fuel quality is less than premium. This 7.1-litre engine system also contains an electric-fuel priming pump circuit and is automatically activated to improve serviceability and reduce downtime. With Eco-Mode power setting and new engine system, Cat 320D2 is capable of reducing fuel consumption up to 15 per cent in heavy-duty applications. This machine is “easy on fuel” and “hard on dirt.” Cat 320D2 comes with a smaller, high-efficiency pilot pump and newly designed main pump that boasts hydraulic efficiency by 3 per cent.

Advantages of Cat 320D2Cat 320D2 is a very robust machine

capable of working in all kinds of applications. Some of the advantages of the Cat 320D2 are that the field-proven C7.1 engine, which is designed for ease of service and can work efficiently at altitudes up to 4,000 metres. An automatic engine-speed control lowers engine rpm during no-load or light-load conditions to minimise fuel consumption. Available couplers — including the Centre-Lock Pin Grabber — allow the operator to quickly change work tools and move from task to task for optimum machine utilisation.

Cat 320D Series 2 hydraulic excavatorWith an array of new features including new engine systems, 320D Series 2 offers a best value proposition that customers can look for. Cat C7.1 engine meets US EPA Tier-2, EU Stage-II and China Stage-1 regulations. The 320D Series 2 has a two-stage

filtration system, replacing a three/four stage fuel filter system which reduces maintenance cost. Both filters are located in the pump compartment for easy access from ground level. A 4-micron primary filter incorporates an integrated water separator. A fuel pressure differential gauge is standard to reduce owning and operating (O&O) costs. A torque increase compared with 320DC6.6 and 3 per cent fuel consumption reduction for the 320D Series 2 versus 320D high-tensile-strength steel upper frame and one-piece swing table.

Helping customers get best returnCat dealers help customers operate longer with lower costs. Cat dealers offer a wide range of services, including customer support agreements, helping with machine selection or replacement and exceptional parts inventory. They also help customers get the best return on their investment. n



Escorts offers the comprehensive range of vibratory compactors in India. In soil compaction category, there are three models to choose from, depending upon the application. Road compaction in India has moved from desired compaction to minimum acceptable and consistent compaction. Rajinder Raina shares the USPs of Escorts machines.

Most innovative road building equipment As road projects got awarded by NHAI in particular, competition increased and international processes and practices started getting adopted. This led to the demand for vibratory compactors with application oriented, specific deliverables.

The next stage of evolution in compactor technology came from penalty and incentive/bonus clauses in the tenders. The customers started preferring/paying premium for high-productivity, low operations cost, reliability and matching after-sales support.

Escorts offers two variants in soil compactors EC5250 and EC2420. The company has recently launched a new vibratory soil compactor EC6650 to fill the slot between the two models.

USP of the machineEC6650 is an 11-tonne machine with an option to supply customised 11.7-tonne machine. 80 per cent of the machine can be serviced from the ground level. The visibility from operator seat is 1 x 1. It offers high operator comfort for minimum fatigue. All controls are on dashboard. Contemporary looks are among the USPs of the machine.

Advantages of EC6650These machines find preference in long stretches of road compaction and sites where high reliability is a must. For consistent output conforming to the required norms of compaction, machine specifications need to be of a particular calibre but equally important is the machine operator who makes the machine to deliver what it is designed for and capable of. EC6650 has been modelled for ease of operation and operation comfort for the best operator-machine integration. “Technology to performance to operator” is how prioritisation took place on the product development.

Criteria for buying of production machinesOwning and operating (O&O) cost

has always been a major criterion for buying of capital equipment/production machines. With the cost of fuel going up, defined timelines — including penalties and bonuses — have redefined the matrix of operating costs. It is now measured in terms of cost incurred per unit output delivered. The fuel consumption needs to be linked to the output of the machine rather than per hour basis.

Availability of after-sales services and spare partsEscorts pioneered the concept of vibratory compactors in India and was the first company to have dealership network. Besides having a wide dealership network, new dealerships are being added to address newer market places for proximity to the work/project sites. Notably, North East where new dealerships have been added in the past couple of years. After-sales support remains one of the major strengths of Escorts. n

Escorts EC6650: ease of operation, reliable

“Escorts pioneered the concept of vibratory compactors in India and was the first company to have dealership network,” says Rajinder Raina, General Manager - Marketing, Escorts Construction Equipment



Atlas Copco Road Construction Equipment division is a part of the construction technique business. The division is one of the leaders in compaction and paving applications. In a conversation, Hiten Kapadia shares how they adopted innovation to make their road building equipment unique.

Innovative Dynapac CC385HFAtlas Copco Road Construction Equipment is designed with over 100 years of expertise in compaction knowledge and applications, where groundbreaking ideas are transformed into cost-efficient solutions and reliable machines. Out of the entire range of Atlas Copco road construction equipment in India, the Dynapac CC385HF high frequency tandem asphalt roller is a perfect solution in engineering, focusing on a line-up of new features.

Dynapac CC385HF Tandem Asphalt Roller is a 9.4-tonne roller with high frequency of 67 Hz and dual amplitude which has the ability to optimise speed and avoid rippling. Its advantages are:• Highproductivity

• Smoothsurfacefinish• Low operating cost to the

customer.

FeaturesThe Dynapac CC385HF offers a series

of unique features. These are:• Slideable and turnable operator

console allows a 180-degree turn of seat instruments and levers enabling full operator control

• Its electronic drive control ensuressmooth start and stop without shuffling

• With high frequency/low amplitudefor thin layers and high amplitude for thick layers, the equipment is versatile and efficiently compacts any type of compact asphalt mix.

• Largewatercapacitywhichincreasesoperating time between water refillbreaks

• Steering hitch and other servicefriendly hydraulics ensures trouble free access for engine and water tank maintenance.

Efficiency The Dynapac CC385HF offers efficiency

in terms of fuel, labour and costs. According to Mr Kapadia, it offers 25 per cent lower fuel consumption and 35 per cent higher productivity as compared to the same class of machines available in the Indian market. It also ensures a perfect surface finish whererework is minimised which in turn lowers costs.

Speedy response time and unmatched serviceWith more than 50 strong dealernetwork (and growing), a healthy stock of equipment and spare parts is maintained across India. Atlas Copco strongly believes that servicing the road construction equipment regularly is very important to ensure reliable operation and a long service life. This belief is supported with the availability of highly skilled and trained service technicians at the Atlas Copco dealers as well as regional offices which enables speedy response time and unmatched service. These technicians play a key role in preventive maintenance as well as resolving equipment breakdowns. n

“Dynapac CC385HF high frequency tandem asphalt roller is a perfect solution in engineering, focusing on a line-up of new features,” says Hiten Kapadia, Head - Road Construction Equipment, Atlas Copco Construction Technique

Dynapac CC385HF: perfect solution in road building



JCB machines: high productivity with maximum operating economy

With increase in road construction activities, the need for innovative construction technology is more evident than ever. People need fuel-efficient machines which give maximum thickness in minimum passes. In an exclusive interview, Amit Gossain shares how JCB keeps its machines reliable with low cost of operation.

Perfect asphalt rollerJCB offers the finest road compaction equipment through its “Vibromax” series (VMT115, VMT860 and VMT330). The VMT115 caters to the soil compaction needs while the VMT860 is a master at asphalt compaction.

Recently launched VMT330 tandem roller is a new addition to the portfolio. VMT330 tandem roller is a highly versatile compactor with high compaction forces. This machine is ideal for

“JCB world-class compactors optimise compaction by amplitude, frequency, static linear load and centrifugal force to achieve best possible compaction in minimum number of passes,” explains Amit Gossain, EVP - Marketing, Business Development and Corporate Affairs, JCB India Ltd.

9-tonne VMT860 is designed to offer high productivity and reliability with maximum operating economy.


28 g



compaction in restricted spaces as it has got high kerb clearance.

JCB VM115 comes with dual anti-vibration isolation system which reduces the vibration thus making it more comfortable for the operator to operate the machine. This machine also has a three-point pre-loaded anti-vibration pad which minimises the effect of vibration.

The 9-tonne VMT860 is designed to offer high productivity and reliability with maximum operating economy. Powered by robust, fully tropicalised, low fuel consumption JCB ecoMAX engine, the ideal combination of static weights, centrifugal forces and amplitudes makes this asphalt roller perfect for both soil and asphalt applications from rolling sub-base to finish rolling.

More robust machineApart from offering best fuel economy, JCB machines are known for reliability, performance, low cost of operation, serviceability, operator comfort and best-in-class durability.

JCB world-class compactors optimise compaction by amplitude, frequency, static linear load and centrifugal force

to achieve best possible compaction in minimum number of passes. From the safety perspective, JCB compactors come with solid steel canopy which makes the machine more robust and minimises the damage during any mishap.

Wide network across IndiaJCB India has ensured that its customers don’t have to travel beyond 50 km to reach a JCB outlet in any part of the country. Hence, the company has developed the strongest product support network with over 575 outlets and 60 dealers.

JCB India also has a pool of trained service engineers who are dedicated to serve the customers with their experience and efficiency. Its dealers currently employ more than 7,000 people in India out of which more than 4,500 look after after-sales support and are regularly trained by JCB India to ensure they are always abreast with the latest in the industry.

JCB India has four centres in India (Pune, Chennai, Ballabgarh and Kolkata) which ensures easy availability of spare parts. n

JCB VM115 comes with dual anti-vibration isolation system which reduces the vibration thus making it more comfortable for the operator to operate the machine.

VMT330 tandem roller is a highly versatile compactor with high compaction forces.

26 f

Power supply 230/400 VAC

Central sensor unit

Machine interface

Radio unit

Wind sensor

Trolley sensor

Calculating unit

Slewing sensor

Override device

Travelling sensor

Externalanemometer signalling kit

External anti-collision

signalling light

NEW TECHNOLOGIES DEDICATED TO YOUR SAFETY

DCS Techno Services Pvt Ltd. (Exclusive distributor for AMCS for India and SAARC)Address : Plot No.169, Road N0.11, Prashasan Nagar, Jubilee Hills, Hyderabad - 500096, AP - India

Phone: +91-40-2355 8136 | Fax +91-40- 2354 1134 Web : www.dcsts.com

Driving Control System

Cameras

Anemomenter

Obstruction lights

Anti-collision

Anti-collision

Zone protection devices

Supervisors of job site

Anemometers

Obstruction lights

Embedded cameras.

Safety features

••••••

AMCS Technologies "FRANCE” provide unique safety product for Tower cranes,



Greaves machines always lived up to the customers’ expectations, providing superior compaction and low maintenance costs. In an exclusive interview with B2B Purchase, Ramachandran Nandagopal shares how Greaves machines have been refined to suit customers’ needs from time to time.

Greaves HTR: superior and sturdy

BW 151 ADH Greaves Heavy Tandem RollerThe maximum operating weight of this machine is 9,000 kg. The axle load at the front and rear of the drum is 4,325 kg, giving a balanced load distribution for better compaction. It is fitted with powerful air-cooled Kirloskar engine. The choice of high- and low-compaction setting permits effective utilisation under changing site conditions.

Advantages of BW 151 ADHHaving both ROPS and FOPS with a maximum gradeability of 40 per cent, the Greaves HTR is robust and preferred brand for compaction on hilly slopes and inclined landscape. The kerb clearance for Greaves is 950 mm, making it more suitable for compaction of culverts, small passages and edges of the road. The crowning process of the drum is done to give a smooth finish on the asphalt roads without leaving any lines behind.

Less maintenance with better safetyGreaves machines require less maintenance due to its closed hydraulic circuit with a filter of 6 microns, extending the oil change period to 2,000 hours. The sliding and swivelling seat along with two operating levers on either side of the operator gives excellent rear and front visibility and improved control of the machine. The operator can control the sprinkler system from the control panel itself. The control panel also has auto vibration and emergency cut-off options for operators’ safety. The water tank is made of polyurethane plastic which eliminates rusting and eventual failure/replacement of the tank. The engine can be easily accessed from the rear and top by just lifting the hood.

Well-connected networkGreaves Construction Equipment Business has an extensive, well-connected network across India with six regional offices, nine branch offices and around 40 dealer offices to reach out to customers to fulfil their maintenance and spare parts requirements. Greaves HTR, however, requires very less maintenance and replacement parts due to its superior quality and sturdy structure. n

“Greaves machines require less maintenance due to its closed hydraulic circuit with a filter of 6 microns, extending the oil change period to 2,000 hours,” emphasises Ramachandran Nandagopal, CEO, Construction Equipment Business, Greaves Cotton Ltd.

At Konecranes, we believe that what we do is the part of your process. We have learnt this by working closely to our customers globally. Our smart features like sway control, load positioning, load synchronization, make the cranes more smart to work with and safe. Our remote data monitoring service helps to analyze actual crane usage data and to plan maintenance schedule effectively to reduce downtime.

Our smart technology and efficient service helps to manage complete crane operations during the lifecycle of crane, right from installation, operations, maintenance, modernization and so on. What you invest in Smart cranes actually cost you less in the long run.

Electric Chain Hoist, Industrial Cranes, Process Cranes, Shipyard Cranes, Container Handling Cranes, Lift Trucks & Reach Stackers, Crane Maintenance and Modernization Services.

PRODUCT RANGE:

WMI Konecranes India Limited19, Level 2, Muttha Towers, Don Bosco Road, Yerwada, Pune - 411006, IndiaTel: +91 20 400 47470, Fax: +91 20 400 47475.Email: [email protected], www.konecranes.in

SMART CRANES COST LESS IN THE LONG RUN



Liugong CLG414BSIII motor grader: efficiency at its best

Although the pace is currently punctuated by procedural hurdles and slowdown, India’s roads and highways story is far from over. As the country ambitiously plans to lay massive number of new roads and rebuild the old ones to match its projected economic growth, it has thrown open new opportunities for construction equipment manufacturers.

“As far as equipment is concerned, we have world-class products already

available in India. For example, CLG920D hydraulic excavators or CLG414BSIII/CLG418 motor graders, and CLG614 compactor, which have the ability to complete jobs at the highest levels of quality, in the shortest time and at the lowest cost per km of road built,” says Rohit Punjabi, Assistant Director - Strategy and Marketing, Liugong India.

Liugong offers the graders in the 150-215HP range in India for construction and mining applications, the most popular model being CLG414BSIII which is used mainly on construction projects. Liugong has designed the motor grader line with proven technology to provide superior operator control, visibility and comfort. The controls are positioned within easy reach, and the cab position provides the best view to the blade and other ground-engaging equipment. With Liugong cutting-edge technology,

it derives power and efficiency from the turbo-charged and air to air, aftercooled Cummins 6BTAA5.9 engine. The engine has 150 hp/112 Kw output providing excellent tractive effort with good fuel efficiency and also meets the most stringent emission norms. Liugong motor graders have been specifically designed to carry out all kinds of heavy-duty jobs. These sophisticated, heavy-duty machines are robust and sturdy so that they meet their own job standards and carry out the applications efficiently.

Liugong India has recently sold its five CLG414BSIII motor grader to L&T Infra; out of which two is currently working on a road project for the development of four laning of 244-km long stretch connecting Beawar-Pali-Pindwara section on NH 14 in Rajasthan worth ` 24.72 billion. n

Liugong offers the graders in the 150-215HP range in India for construction and mining applications, the most popular model being CLG414BSIII which is used mainly on construction projects



Case Motor Grader Model 845 B and Case Model 865 B are one of most the advanced innovative products introduced by Case in India. Case has been manufacturing graders for decades in other countries. Anil Bhatia talks about their latest innovation in motor graders.

Advantages of Case 845 B and 865 BThe innovative features of the grader include the variable horsepower Fiat engine, automatic ZF transmission, unique multi-curvature mouldboard and specious cabin with excellent all around visibility. These features result in reduced fuel consumption, reduced operating cost, more operator comfort and higher productivity.

State-of-the-art featuresThe B-Series Motor Graders feature state-of-the-art NEF engine with variable horse power. The engine’s horsepower varies depending on the load exerted on the machine. The machine has a multi-curvature mould board which reduces the resistance coming on the engine and hence reduces the fuel consumption. The cabin of the grader is spacious and provides excellent mound board visibility.

Power and fuel efficiencyThe new graders feature an FPT Industrial 6.7-litre engine with triple horsepower ranges on the 865B model

and dual horsepower on the 845B to match the power requirements of various applications and deliver optimum fuel efficiency.

Easy serviceability and durabilityThe Case circle design, with outer-facing gear teeth, improves operations and serviceability, maintains gear power and increases the lifecycle drive components. An exclusive multi-radius, involute mouldboard lets the Case B-Series grader move more material with less horsepower and fuel than competitive models.

Strong service networkAccording to Mr Bhatia, Case is already the market leader in compaction equipment segment. Case has a strong service network to expand its market and customer base. For this, the company has introduced many new ideas like mobile service vans and ERP-enable part support which results in low downtime of the machine. n

Model and technical specifications

845B 865B

Engine FPT 6.7 VHP FPT 6.7 VHP

Power 150 hp/173 hp 193 hp/225 hp/220 hp

Blade width 3,658 mm (12 inch) 3,962 mm (13 inch)

Operating weight 14,605 kg 15,587 kg

Transmission 6 forward and 3 reverse with torque

6 forward and 3 reverse with torque

Case B-Series Grader increases productivity efficiently

“Case B-Series Grader move more material with less horsepower and fuel than competitive models,” emphasises Anil Bhatia, Director - Sales and Marketing, Case New Holland Construction Equipment (I) Pvt. Ltd. (Case India)


PROFILECranes & MHE

ElectroMech, known as one of the largest producers of EOT cranes, has recently launched tower cranes, especially for India. In a conversation, Tushar Mehendale shares why these cranes are ideal and easy to use.

ElectroMech with latest offeringsThe latest offerings by ElectroMech for the construction sector are “made for India” TC 5013 - 5 and TC 5013 - 5G tower crane models, having a SWL of 5 tonnes and a tip load of 1.3 tonnes at 50 metres. The inner climbing model has a mast section which has been designed keeping in mind typical Indian lift shafts. This model can be accommodated in a lift shaft, measuring 1.9 m x 2.1 m or a floor cut out of 1.38 m x 1.5 m.

Zoomlion’s experienceTC 5013 - 5 and TC 5013 - 5G tower

crane models have been developed after consultation with several developers and contractors, taking Zoomlion’s experience into account in the Indian market. Amongst the host of features that make these cranes easy to use on-sites are a quick change device which requires just a pin to be removed for rapid switching between wire rope falls.

Safety featuresSafety is also addressed through various features such as a self-climbing mechanism with anti-drop device which ensures safety during jacking while erecting the crane and wire rope and axle breakage protection on the trolley for safe operations.

Availability of after-sales servicesElectroMech India Pvt. Ltd. takes care of complete after-sales service for Zoomlion tower cranes and maintains a stock of all spare parts. n

“TC 5013 - 5 and TC 5013 - 5G tower cranes

have been developed after consultation with

several developers and contractors,” says

Tushar Mehendale, Managing Director,

ElectroMech

ElectroMech tower cranes: safe, easy to use

BRICK & PAVER BLOCK MAKING MACHINE

AHP – 15001500 Bricks per Hr / 1000 pavers per Hr, Pressing capacity – 75 Tons, 3 Bricks/2 Paver Block per stroke

BRICK MAKING MACHINE (FULLY AUTOMATIC PLC CONTROL)

AHP – 1500 1500 Bricks / Hr, Pressing capacity – 50 Tons, 3 Bricks per stroke

AHP – 20002000 Bricks / Hr, Pressing Capacity – 65 Tons, 4 Bricks per stroke

AHP – 25002500 Bricks/ Hr, Pressing Capacity – 80 Tons, 5 Bricks per stroke

AHP – 30003000 Bricks/ Hr, Pressing Capacity – 105 Tons, 7 Bricks per stroke

AHP -35003500 Bricks/ Hr, Pressing Capacity – 120 Tons, 8 Bricks per stroke

AHP – 10001000 Bricks / Hr, Pressing capacity – 40 Tons, 2 Bricks per stroke

SEMI AUTOMATIC BRICK MAKING MACHINE

Production capacity240 bricks/hour (L-9"xW-6" x H-3")360 bricks/hour (L-9"xW-4" x H-3")

Cycles 2 cycles/ minute

Pressing capacity50 T

Operation / control Semi-automatic PLC base

Technical Specifications

AHP MachinesAddress: Gat No. 1571/3, Chikhali-Talawade Road, Shelarwasti, Chikhali, Pune 412 114 INDIACell : +91-9922443405 / 9922449243,E-mail : [email protected], [email protected] / Web Site :www.ahpmachines.com

CELLULAR LIGHT WEIGHT CONCRETE BLOCK

Available Plant Capacity

15 mtr Cube / Day

30 mtr Cube / Day

60 mtr Cube / Day

100 mtr Cube / Day

150 mtr Cube / Day

AHP Machines Manufacturer of Fly ash brick & Paver Block Making Machines


PROFILECranes & MHE

SLX chain hoist is one of a kind

SLX chain hoist by Konecranes is an advanced version of its predecessor CLX. Kaushik Chakraborty talks on why their SLX cranes are ideal for general manufacturing environments.

Latest crane Konecranes invests heavily in R&D to bring new technologies and innovations to the market. The company recently launched sleek, compact SLX chain hoist for light-lifting material handling segment. Konecranes has built on decades of experience with proven technologies to introduce this robust and durable unit to the market.

SLX chain hoist is an advanced version of its predecessor CLX, which won Red Dot Design Award in 2013. SLX electric chain hoist has been designed to meet and exceed industrial requirements and to provide a reliable solution for various processes in many different industries.

SLX is ideal for general manufacturing environments, where it can be used for high-speed load transfers and precise assembly work.

SLX chain hoistSLX chain hoist is reliable, increases performance and adds value to the customers through innovative technology, extended lifetime and increased safety. With dual-lifting speed, a standard limit switch and versatile configuration like hook suspension, push trolley and motorised trolley version, the SLX chain hoist can be used for a range of applications such as workstation cranes, overhead cranes, jib cranes and variety of fixed configurations.

Technical features• Modelswithsinglefallchain• Thenew6:1speedratioenableshigh

main speed and a slow second speed• Faster hoisting/lowering with partial

loads• Programmablelimitswitch• Innovative 5-pocket chain sprocketwith5-intermediateteeth

• New clutch concept with increasedsafety.

Advantages of SLX chain hoistSLX chain hoist has been developed to benefit customers’ bottom line.

• Compact size provides exceptionalheadroom and lifting height

• Robust design helps in significantlylonger lifetime compared to standard 1AM-ratedchainhoists

• Widecapacityrangeof60–2,500kg• In-built Inverter helps in smooth

movement, saving time and increasing efficiency

• Different levels of customisation forthe exact solution

• Suitable for extended temperaturerange-20Cto+50C

• Hoist body without any plastic andelectrical designs are protected inside hoist covers.

Reliable performance with easy operationEnergy efficiency is the crucial parameter while selecting any crane as it increases the operating cost. Crane operation requires frequent starting and stopping. During each braking period and load lowering, the generated energy is either wasted or fed back to the supply line.

Konecranes designs its products with focus on improving the performance and reliability of the system, which in

“SLX chain hoist is reliable, increases performance and adds value to the customers,” explains Kaushik Chakraborty, AGM - Workstation Lifting Systems, WMI Konecranes India Ltd.

PROFILE Cranes & MHE

turn helps the customers in long run. SLX chain hoist is an electric chain hoist which provides efficiency with less usage of electricity. SLX has reliable performance with easy operation. With such performance packed features, SLX hoist is one of a kind.

Safety featuresA crane isn’t just lifting equipment, but helps keep production process and business running smoothly. Hence, safety is very important and Konecranes

tries its best to provide features which help in smooth functioning. Its safety features are:• Shockloadabsorption:Reduceseffect

of a sudden shock load• Electronic overload device: With

strain gauge sensor overload can be detected easily

• Polygon dampening: Reducesvibration of the load by 40 per cent

Clutch control/brake control• Stops operation when speed in the

secondary side of clutch is below set limit

• Ensures that brake is open whenmotor is activated

• Checks that brake is closed whenmotor is not running.

Availability of after-sales servicesKonecranes doesn’t supply lifting equipment but is committed to provide complete lifting solutions make clients’ operations even safer and productive. Konecranes has always been focusing on developing new technology and provide prompt service to customers. Konecranes has a team of more than 100 well-qualified, experienced service engineers. The company has also introduced new service concepts like crane reliability survey and equipment technical audit which are very helpful to maintenancestaff toplan theiractivityand reduce downtime.

Based in Pune, Konecranes operatesacross India, including Mumbai, Vadodara, Nagpur, Delhi, Kolkata, Hyderabad,BangaloreandChennai. n

Advertorial


Split Tiles best remedy to stop roof leakage

Why do concrete slabs leak?Due to increased heat in day time, concrete slabs expand. And fall in temperature at night lead to contraction of concrete slab. This expansion and contraction of the concrete cause minute cracks initially on the ordinary cement roof slab. This is due to the brittle nature of cement concrete as the cement portion of it does not have the provision to expand or contract. Once the crack widens, water get inside the RCC slab and start wetting the inner surface which lead to the failing of water in droplets. Then the iron bars start corroding causing increase in volume and consequently enlargement of crack cause more leakage of roof. If not checked in time the strength of the building gets deteriorated considerably. Split Tiles are an excellent remedy to prevent such leakage.

Split TilesSplit Tiles are manufactured using the most advanced technology. After the selection of various types of clay they are proportionately mixed using mixer, crusher and fine grinded before extrusion through polisher. Clay is kept for ageing before final extraction through de-airing machine. De-Airing is the latest method in terracotta wherein entire air from the clay molecules is drawn out using high-power vacuum pumps. This process renders more compatibility strength and fine finish to the tiles.

Raja Brick & Tile Industries offers two sizes of tile in this category: 10” x 5” and 9” x 9”.

Laying of Split TilesThe method of laying the Split Tiles over the concrete slab is quiet simple. Some sand, cement and waterproofing compounds are needed.

The area has to be prepared by pouring cement grout on the slab surface and placing the split tiles over the grout, after splitting the tiles in to two parts. This can be achieved by hitting the side of the tile with a masonry trowel. Then the tiles to be laid at a gap of 3-4 mm between the tiles with adequate slope for water to drain and tiles are to be inserted into the parapet wall.

After one or two days of curing make sure that the tiles are holding on to the grout that has been laid underneath. Now the gaps between the tiles are filled with wet mix of cement, sand and waterproofing compound. After a normal curing the slab becomes waterproof. n

Contact

Raja Brick & Tile IndustriesRaja Nagar, Oorukere Post, Tumkur - 572106KarnatakaTele: +91-816-6531933, 6531944, 6531955E-mail: [email protected]

Landmark projects and clientele

Mysore PalaceJagmohan PalaceMysore TownhallShoba Developers, BangaloreTotal Environment, BangaloreGopalan Enterprises, Bangalore.

10x5 laid 9x9 laid 10x5 laid

Raja Brick & Tile Industries offers the simplest technical remedy to stop the leakage of RCC roof or any other flat roof like stone slab roof. Economical, eco-friendly, easy-to-lay Split Tiles are the most effective insulator against extreme climatic conditions.


PRODUCT LaUnChConcrete Pump

Liebherr unveils truck- mounted concrete pump 37 R4 XXT

Liebherr has launched new truck-mounted concrete pump 37 R4 XXT at the World of Concrete event in Las Vegas, USA. Comprising a pump type THP 140 H, this equipment also features a Liebherr-patented XXT-narrow outrigger.

The four-section, roll-fold distributor boom has a reach of 37 metres and is extremely torsional-resistant. This ensures reduced vibrations when

manoeuvring the boom during onsite applications. Well-balanced weight distribution is achieved by channelling the concrete line extremely close to the boom on both left and right-hand sides. Pressure loss is reduced over the entire length of the distributor boom due to the generous 275-mm radius of the pipe bends. Moreover, the pipe bends are predominantly of the same type, minimising the need to stock diverse replacement parts. Numerous design-

related features optimise servicing tasks by simplifying the replacement of wear parts.

Liebherr is sole market provider of the exceptionally sturdy and low-torsion patented XXT-narrow outrigger. The front and rear support arms are secured directly to the pedestal of the distributor boom, through which the forces are channelled directly into the supports, completely bypassing the boom. All four support arms are pivot-mounted to allow maximum flexibility and a particularly extensive working range of the distributor boom with narrow sup-port configurations. This feature is invaluable on construction sites with restricted access.

The truck-mounted concrete pump 37 R4 XXT can be equipped with high-performance pump units featuring three different outputs ranging from 125-163 cubic metres/hour, depending on the respective application.

Chassis from various manufacturers can be used for the truck-mounted concrete pump in accordance with customer requirements.

A wide range of optional accessories and equipment are available for the 37 R4 XXT. It is, therefore, possible for the customer to specify additional storage compartments, an extra diesel tank or a further access point on the left-hand side for example. A magnetic rotating beacon provides added safety and a pneumatic end hose pinch valve prevents any concrete spillage when repositioning the boom.

These rugged, durable concrete pumps from Liebherr are developed and produced in Germany, and feature exclusively high-quality components from renowned manufacturers. n

Truck-mounted concrete pump 37 R4 XXT can be equipped with high-performance pump units featuring three different outputs ranging from 125-163 cubic metres/hour

Email at [email protected] or call at +91-22-32682214/15 to get your products listed at free of cost. Hurry up, this offer is only for 30 days!!!

.COM

PRESENTING THE MOST USEFUL PROJECT

EQUIPMENT INFOBANK


INDUSTRY SPEAKSAccess Equipment

Maco aims to be the best source for powered access platformsMaco Corporation (India) Pvt. Ltd. offers wide range of access equipment in India. In an interview with B2B Purchase, Ketan Patel talks on the industry trends and his strategies.

Could you brief us on the Maco’s expertise in access equipment sector? Maco began selling Genie range of access equipment in India from 2004 and made it the biggest brand in the end user segment. Since then, we have sold more than 700 equipment and still going strong. It is the aggressive marketing strategy, hard-work by the team and uncompromising customer service we render to our customers that makes it the most preferred choice when it comes to select access platform or MEWP for a job.

We also provide various solutions as and when required to our customers by offering them spider platforms, easily installable and portable powered ladders etc. What are the access equipment and solutions you offer? We primarily offer the Genie brand of machines and also Platform Basket,

S.r.l., Italy range of spider lifts wherever a Genie machine cannot suffice the purpose. As regards to solutions, we offer new, used, rentals, AMC’s - basically almost everything under one roof.

In Genie, we have the aerial work platform (AC- and DC-powered), scissor lifts (battery and diesel), articulating boom lifts (battery and diesel),

“We see our company as one of the leaders in access equipment industry having one stop solutions be it new, used or on rent,” says Ketan Patel, Director, Maco Corporation (India) Pvt. Ltd.

46 g


INDUSTRY SPEAKSAccess Equipment

telescopic boom lifts, trailer-mounted booms, telehandlers and lighting towers.

We have Genie machines that can carry single person upto the height of 14 metres (AWP). We also have machines that can carry two or more people from 6 metres to the height of 56.69 metres. This is the highest boom in the world.

We have Genie scissor lifts which can carry upto 1.1 tonne of load. These scissor lifts have been acknowledged as the best in the industry. In the Platforms

Basket, Italy range we have spider platforms which can go upto the height of 30 metres.

Could you enlighten us on your most advanced technologies in access equipment sector? Technological advancement in the access equipment sector has come as more safety to the operator and Genie as always has come up with the most awarded solution.

Firstly, Genie’s recent innovation has been the OPS Guard (Operators Protective Structure) which is patented and proven to be the best. Genie has won three LLEAP gold awards for Genie ZX-135 articulating boom, Genie OPS and Genie GTH-1544 telehandler.

Secondly, the X Chassis which allows the biggest booms to be transported in the normal trailers allowing huge saving

to rentals companies and machines owners on account of logistics and manoeuvring at site

How do you see the acceptance of such technologies in Indian market? This is an acknowledged concept in the Indian market, however due to insufficient legislation their visibility is reduced to projects where MNCs or reputed construction companies are involved. But we expect to see a change in the scenario soon as there are companies like ours are working hard to bring in such norms.

More than 700 machines which we have sold are to the companies across industries like shipbuilding, hotels, automation, railways, aviation, power generation and distribution.

How does the access equipment industry view the ongoing slowdown and delays in infra projects? Access equipment remains a capital purchase. However the presence of rental companies is offering the customers an alternative and cheaper option. This allows the companies into infra projects to rent rather than make large investment in purchase. The slowdown has surely its effects but this is a changing phase and is bound to improve in the coming months.

How the market is going to be evolved in the coming years? The markets across the world for access equipment have been predominantly a rental sector product. In India too we see more companies coming into the rental of access platforms.

Today anybody with a machine can rent at whatever rate he wants where machine quality is not monitored and there is no evaluation of the operator’s capabilities. In future, we hope to see the market only for organised companies who will rent out quality machines with trained operators within a transparent business environment. In current scenario, what is the most preferred option for a customer amongst buying and renting? For manufacturing companies or a company with a 24 x 7 maintenance team, buying is the best option as they will own the machine and can use the same as and when required. Also, they will be assured of the health of the machine or compliance with the company policies.

For an infrastructure company, PEB project developer, EPC contractor or any company into execution of projects, rental is the best option as their business depends on getting contracts. Buying a machine and keeping it idle in the yard till they get a contract may not be feasible. Further they do not have to employ trained manpower to maintain the machine/s or invest into inventory of spares and consumables etc.

Where do you see Maco in the next 5 years — product wise and business wise?We see our company as one of the leaders in access equipment industry having one stop solutions be it new, used or on rent. n

Height 3,05 m

Width 2,49 m

Length 12,98 m

Weight 24,494 kg

44 f

TIDC INDIAA Unit of Tube Investments of India Ltd.

CHAIN COMPANYTHE COMPLETETHE COMPLETE

Automobiles, Ancillaries, Abrasives, Beverages, Cement, Chemicals.

Construction, Electronics, Fertilisers, Food Processing, Glass,

ACROSS INDUSTRIES, WE HELP KEEPTHINGS MOVING ALONG NICELY

Leather, Material Handling, Match Industry, Paints, Pharmaceuticals,

Packaging, Paper, Refineries, Sugar, Textiles, Writing Instruments

Decades of R&D expertise in industrial chaintechnology, extensive manufacturing strengths and theability to provide customised solution for clients make TIDC the complete chain company indeed.With a range that includes leaf chains, conveyor chains,

rubber top chains, sintered bush chains, anti-corrosivechains, attachments chains and more.

To meet our representatives or see a catalogue on ourproduct range, call us today

TIDC INDIA, Post bag No.11, Ambattur, Chennai - 600 053 Tel : 044-42235509 /508 Fax : 044 - 42235556 / 516

Email : [email protected] Website : www.tidcindia.in


TECHNOLOGYConcrete Equipment

Bridge construction is most complicated because of unexpected difficulties faced during construction in challenging conditions, especially during concreting. The latest trends and developments in design and technology have lead to many challenges during the construction of bridges.

Challenges faced in bridge concretingThe quality and reliability of the concrete is crucial to safe construction and lifespan of the bridges. To ensure the same, different ingredients of concrete have to be mixed

homogenously to produce a perfect mix of concrete and place in short span of time. Bridge concreting is done using concrete mix up to M80 grade and critical requirements like casting blocks need maximum strength in minimum possible time for pre-stressed or post-tension casting.

Some of the other issues and challenges in concreting of bridges are stiff consistency concrete producing, placing concrete girders using cranes (e.g. metro projects) on heavily crowded roads, and transportation and laying of concrete pipes on sea or river for

concrete placement. To overcome these concreting difficulties, Schwing Stetter India not only manufactures different types of advanced concreting equipment but also provides various concreting solutions.

Equipment usedThe most commonly used Schwing Stetter equipment to place concrete for bridge projects are batching plants CP30 and M1, which provide a homogenous mix of concrete; concrete pumps like BP350, SP1800 and BP3500 which are designed with two valve technologies; and flat gate

A large numbers of bridges, flyovers and elevated MRTS structures are being constructed all over the country for better and faster commuting. They also provide connectivity to different parts of the city in a country which needs fast transport system. Schwing Stetter equipment are being deployed in building many bridge stuctures in India.

BridgeBridgeChallengeChallenge

50 g

The 414 BSIII Series Motor Grader

A full line of machines, built to take on the world’s toughest jobs.

LiuGong. Tough World. Tough Equipment. SM

Tough is

www.liugong.com

Contact: 82, Okhla Industrial Estate Phase-III, New Delhi-110020Ph: 011-47272200, Fax: 011-47272220Mail: [email protected]

Plant: Plot No.- 163, Industrial AreaSector-III, Pithampur, Dist.- Dhar, Madhya Pradesh- 454774Ph: 07292-416700, Fax: 07292-416701


TECHNOLOGYConcrete Equipment

valve (FGV) and rock valve which enable smooth conveying of concrete to long distances and help pump stiff mixes for casting.

Transit mixer (6 cubic metres) is usually used to transport concrete for bridge constructions. These cost-effective transit mixers come with modern design and simple handling. Separate placing boom - 28 metre to 42 metre and boom placer - 17 metre to 36

metre are used for faster completion of concrete placement. These equipment take on the challenges posted by the bridge projects.

Concreting solutionsSchwing Stetter India’s team of concrete experts look into the depth of the problems and guide the customer on easy concreting. Customers call Schwing Stetter India right away to discuss the

project before the commencement of construction and to find the possible concrete placing solutions for complicated projects. The team provides the best solution which would make the most sense and would be cost effective. Schwing Stetter India has a complete system approach, helping the customer from the beginning of the project.

Bridge projectsSchwing Stetter India has contributed in many critical and landmark bridge projects in India. The different types of bridge projects where Schwing Stetter equipment are used are beam or girder type bridges (regular), cable stayed bridge like Bandra-Worli Sea Link, suspension bridges like bridge over the Ganges in Kolkata, elevated highway bridge like Pune Kothrud Bypass, Bangalore elevated highway bridge and rail bridge for metro and monorail projects in Chennai, Delhi, Bangalore, Kochi and Wadala, and Vallarpadam Railway Bridges in Kochi.

Schwing Stetter India has also done bridge projects like Hebbal Flyover in Bangalore, Kosi River Bridge in Assam, White House Bridge in Navi Mumbai, and Delhi Gate Bridge and Sayan Bridge in Surat. n

Some of the concreting solutions from Schwing Stetter are:

y Selection of equipment for batching, transporting and placing as per project requirements

y Use of RVMs for concrete transfer from shore to offshore

y Mounting option for batching plant, transit mixer, and separate placing boom on barge and on lattice frame

y Use of minimum space required for setting up Schwing boom placer which is useful in traffic as well as casting yards

y Pipeline placing and cleaning systems for cast yard, offshore and high structure application.

48 f


PROFILEConcrete Pump

Ready-to-use foam concrete plant for multiple applications

Sai-Ansh Engineers Pvt. Ltd. (SAEPL) has developed a foam concrete plant with integrated system of foam generator and pump. With SAEPL’s medium-sized plant, the foam concrete can be pumped to a height of 20 metres and horizontally to a length of 150 metres; with this layout foam concrete walls can be easily cast. Foam concrete can also be laid on terrace and other floors to get benefit of thermal and acoustic insulation with all the other benefits of foam concrete.

Foam concrete could also be used to make lower density sandwich panels by pumping. It has great thermal and acoustic insulation properties.

The specialty of SAEPL plant is that the density of foam concrete can be adjusted online, so that the concrete can be pumped and laid as per requirement at particular locations.

SAEPL can provide the complete plant on the lines of a fully automatic concrete batching plant. In case of

an automatic batching system, the conveyor is replaced by a batching hopper and bins. The plant is a ready-to-use with just the mains to be connected in the control panel after proper levelling of the equipment and barrels for foaming agent and water to be provided. The plant consists of three sections: mixer, foam generator and pumping.

In the mixer section cement sand, flyash and water are charged as per the mix design established for the required density. Bags of cement, sand, and flyash are to be kept ready duly weighed as per the mix design, so that there is no or very little time lag between the time the batch is consumed and mixer is refilled. The level in the mixer has to be always maintained at one-third of the capacity.

In the foam generator section, the

inlet pipe with a strainer provided with the plant has to be put in the barrel containing diluted foaming agent. This diluted liquid is automatically pumped into the system and with compressed air the foam is generated. The test foam can be taken from the bye pass line provided and ensured that it has the required parameters before it is changed to supply in the system.

In the pumping section, the cement slurry is sucked and discharged into a chamber where the foam generated is also pumped into the chamber. Then

the foam is injected into cement slurry while it passes through the chamber and at the other end of the chamber we get foam concrete ready. Discharge pipe is connected at the end of the chamber and the discharged foam concrete can be poured in the moulds or site as required.

The density of the foam concrete can be adjusted simply by using a knob in the control panel. n

Contact:Sai-Ansh Engineers Pvt. Ltd.105, Stanford Plaza, Oshiwara Link Road, Opp. Citi Mall,Andheri West, Mumbai - 400 053Tele: +91-22-26733630, Telefax: +91-22-26732985Mob: +91-9223347882E-mail: [email protected]

Mumbai-based Sai-Ansh Engineers Pvt. Ltd. has developed a single unit foam concrete plant used to mix and pump foam concrete of required density

Technical specifications for foam concrete plant

Model Motor HP Discharge Metres

Mixer Foaming Pump Length Height

SA-40 2 2 2 120 20

SA-80 3 3 3 150 30

INDUSTRY UPDATE RCMME

Ingersoll Rand launches Ultra EL compressor coolant

Ingersoll Rand, a global leader in air compressors, professional tools and material handling equipment, recently released Ultra EL, a high-performance lubricant incorporating the latest performance-additive technologies.

Ingersoll Rand Ultra EL is a high-performance compressor coolant based on a blend of PAG and POE base stocks and incorporates the latest performance additive technology.

Features• Longevity and service life of 16,000

hours• Superiorwearprotection

• Robustcorrosioninhibition• Improved performance in thepresenceofairandwater

• Advancedlubricantsolution• UltraELisavailableforuseinallrotaryscrewcompressors

• Available in 1-litre pail, 5-litre pail,15-litrepail,and208-litredrum

• UltraELisbiodegradableaccordingtoOECD-301Btestmethods.

According to the company, “The new generation of coolanttechnology for rotary screw aircompressors is developed extensively overaperiodofthreeyearsduringwhicheverypossibleaspectwassubjectedtorigorous laboratory analysis, controlled compressor endurance tests, and field trials. The main goal of the development work was to produce a product thatwouldlastupto16,000hoursinarotary screwaircompressor.” n

Ultra EL is a high-performance compressor coolant based on a blend of PAG and POE base stocks and incorporates the latest performance additive technology

A Volvo STORY SUCCESSVolvo Construction Equipment

Building the to SuccessRoad

Jugal Kishore Mahanta,Director JKM Infra Works Pvt. Ltd

“Good Machines are the heart of our business. I don't believe in compromising. Opportunities don't come often, that is when I met Volvo CE. And that was just the beginning.” - JK Mahanta

The Eastern India has an untouched mesmerizing beauty of its own. The rocky and tea garden grazed paths of Eastern Assam did not have such good roads until a few years back when someone took the initiative to construct them. Since then there has been no turning back.

“There were not many good roads in Assam. As a student we were leaders and headed many movements. As time passed by we wanted to do something worth for the state. And here I am all these years later from a Student leader to a successful Businessman”, says Mahanta.

Five years back when the Company was in its initial stages, Mahanta took his leap of faith and decided to venture into Volvo CE for his business needs. “It is very important to use the best of machines in the road construction business as they play a key role. And to be honest, I doubt if there is any other option that could be better than Volvo”, he smiles. Mahanta says that the strong and long lasting machines with its fuel efficiency and robustness stands out

The Road RunnersVolvo CE Motor Grader paving the path to a beautiful road

amongst all the others in this filed.

JKM Infra Works Pvt.

Ltd bought their first

Volvo Machine almost

five years back. Over

the years, he not

only expanded his

business with over 500

employees working

under him but also

extended his relation-

ship with Volvo CE to a great

extent. Currently he owns a number

of EC-210 Excavators, Pneumatic

Tyre Rol ler, DD-100 Asphal t

C o m p a c t o r s , V i b r a t o r y S o i l

Compactors SD-100 and G-930

Motor Graders amongst his set of

Volvo machineries. These are used in

different steps to construct a beautiful

road which includes digging up the

ground followed by compaction and

grading of the soil. Next the

bituminous layer is placed which is

rolled to smoothen the road.

“Vo lvo CE per fo rms beyond expectations. Just providing the best machines do not make a company outstanding. Out of the world service provided by Volvo CE make them the

Perfect blend of service and quality through the years

best. Many instances in the past have le f t me spel l bound on the spontaneous service they have never failed to provide in the extreme interiors of the city.” He says this as he narrates a story about a machine that stopped working and did not have spare parts at the time. It was in no time that Volvo CE flew two of their engineers to the interiors in Assam and they had the machine working within 8 hours. “These Volvo CE machines are self sufficient and in all these years I never had a chance to complain”, he says with a gleaming smile.

Since the time they started using Volvo equipments, the production shot up and the fuel efficiency also helped in cutting costs. It is the perfect investment in this line of business.

Looking at the machines working in front of him, Mahanta says, “When

you asked me what makes Volvo CE stand out from others, I really don't have a single answer. As I said it is not just the machine quality or fuel e f f ic iency or the services, they also have a really strong Hydraulic feature and an in built safety mechanism. So I can relax and not worry at all.”

Going ahead in the future, the

company has plans of expanding

their business with the assistance

of Volvo CE. “In my line of business

I have not found anyone else

provide me machines as Volvo

CE. I can blindly trust on the

quality and services as I have

done since the first day. Their

unquestioned commitment should

be an inspiration to all”.

Volvo Construction Equipment www.volvoce.com ADVERTORIAL

Volvo CE appoints Pal Infrastructure as its new dealer in North IndiaVolvo Construction Equipment (CE), one of the world’s largest manufacturers of construction machines and a wholly-owned subsidiary of AB Volvo has announced the launch of its new dealership in North India, Pal Infrastructure Solutions.

The company will be operating through its offices and warehouses in Zirakpur, Jammu and Mandi to support customers in Punjab, J&K and Himachal Pradesh. Pal Infrastructure Solutions will be offering the entire range of Volvo CE – excavators, wheel loaders, motor graders and road machinery and in addition, will provide aftermarket support to customers in these regions.

“With the new dealership, we are confident of offering enhanced sales and support to our customers thereby increasing customer satisfaction,” said A.M. Muralidharan, President – Volvo Construction Equipment. “The response to our brand and products has been tremendous and the opening of the new dealership will strengthen our foothold in these regions.”


PROFILERCMME

435E Backhoe Loader (BHL), launched by Ashok Leyland John Deere Construction Equipment Company Pvt. Ltd., a joint venture between Ashok Leyland and John Deere, is specifically targeted at first time users offering them improvement in fuel cost.

According to a company statement, “The 435E BHL offers reduction in cost of operations and delivers savings upto 20 per cent of the EMI value to the customer, giving the product an important competitive edge. The 435E BHL is backed by best-in-class after sales support with a service engineer to machine ratio of 1:8, rapid response mobile service vans and a dedicated call centre. This enables Leyland Deere to offer the Indian customers an industry best-in-class Mean-time to Restore (MTTR), thereby maximising availability of the machine and earnings for the customers.”

FeaturesRugged engine435 BHL is powered by Ashok Leyland

H4CTIC3N, a BSIII compliant non-EGR engine built with a robust mechanical inline fuel injection pump that makes it reliable and durable.

Heavy-duty backhoe• Robotic-welded boom and arm

structures• High backhoe speed for faster

operations• Powercurveboom• 15feetdig-depth• Highbuckettear-outforces.

Operator comfort• Cabinprovidesamplespaceandleg-

room• Highvisibilityonallsides• Power-shifttransmissionthatenables

gear shifting on the FNR lever• 3-layered roof that keeps the cabin

cool• Reducedoperator effort due tohigh

reach of loader.

High performance loader• Knee-profileloaderarms

• Divergentloaderarms• Highbreak-outforces• Anti-spillmechanism.

Safe435E BHL offers enhanced safety as its cabin is designed and tested to ROPS (Rollover Protection Structure) and FOPS (Falling Object Protection Structure). n

Where ‘E’ stands for ‘efficiency’

“The 435E BHL offers reduction in cost of operations and delivers savings upto 20 per cent of the EMI value to the customer, giving the product an important competitive edge”

Highlights of 435E BHL• Designedtotargetthefirst-time

users/ buyers in construction industry

• Cost savings up to 20 per cent of EMI

• Powered by ‘H’ Series BS IIIcompliant engine that features a mechanical inline fuel injection pump offering optimal performance

• Cabin offers better comfortand larger space while easy-access controls offer superior ergonomics

PROFILE RCMME

GMK6400: performance, productivity and comfort

Advanced carrier cabGrove all-terrain carrier cabs feature air-suspension and reclining seats, heated and electric adjustable mirrors, a glare-fee instrument cluster and a panoramic windscreen for excellent visibility.

Superior manoeuvrabilityMEGATRAK, the patented independent suspension and all-wheel steer system

used on Grove all-terrain cranes, provides a level of operator comfort and manoeuvrability. MEGATRAK allows for each wheel to remain on the ground at all times — keeping stresses and weight evenly distributed.

All-wheel steeringThe all-wheel steering offered by GMK all-terrain cranes provides superior manoeuvrability and lowers maintenance costs by allowing a fully laden crane to distribute weight evenly across all axles.

MEGADRIVEMEGADRIVE, exclusive technology to the GMK6400, allows better traction, longer part lifecycles and smooth

acceleration from a standstill.

Steer-by-wireSteer-by-wire increases performance by providing operators superior control and manoeuvrability — both on-road and off.

Setup with confidenceReduce setup time cost with auto-levelling technology. For tight job site conditions, most Grove GMK models offer up to 5 different outrigger bases — providing operators with a higher level of confidence when operating on challenging ground conditions. Auto-levelling allows operators the option to level the crane automatically or manually. n

GMK6400, one of the newest all-terrain cranes from Grove, is designed to increase crew’s performance, productivity and profitability. The crane has earned Manitowoc the “Innovation Manufacturer” award from Europe’s leading lifting and transportation trade association in 2013.


PROFILERCMME

Susumo offers new range of tunneling machines

Susumo Engineering has launched a new range of machines for tunneling jobs. It consists of the whole range from simple tractor trolley loading bucket to mucking machines.

Mucking MachineIt consists of an excavating arm and a conveyor. The arm scrapes the muck on the conveyor. The conveyor carries the muck to a height of 2.25 metres. Dumpers have to reverse and stand under the conveyor to collect the falling muck. The whole machine is self-propelled. All four wheels have independent power and all of them can be steered. This helps in taking gradients, uneven terrains and turning in small spaces.

Tunnel ExcavatorsThis is an excavator mounted on tyres. The excavating arm is specially designed. It has a long reach and can turn 360 degrees in very small micro-tunnels also. All its wheels are hydraulically driven hence it can take gradients. Being on tyres it travels faster than track-mounted excavators. It can pick-up muck from the front, turn 180 degrees and unload it on trolleys or

dumpers etc. This is being considered as an ideal machine for small tunnels and mines.

Trolley Loading Bucket The entry level machine is a bucket which loads tractor trolleys. The muck has to be scrapped on the bucket manually. When it reaches a maximum

capacity of 500-kg, the bucket is raised hydraulically. The whole load of muck is thus transported directly to the centre of the tractor trolley. This machine is self-propelled and works on single phase electric supply. It mainly eliminates the lifting of muck by labour. It involves the least of hydraulics and is hence easy to operate and maintain.

Site-TrucksThese are very low height machines which can carry muck and pour it outside the tunnels. These also hydraulically-powered 4-wheel drive machines. These can also be used to carry concrete. n

Contact:Susumo Engineering03, Shailesh Industrial Estate No. 04,Navghar, Vasai (E), Dist: Thane, Maharashtra - 401210Tele: +91-250-2932489/1819Tele Fax: +91-250-2932489E-mail:[email protected], [email protected]

Introduces whole range of mucking machines in India

Mucking Machine

Tunnel Excavators

INDUSTRY UPDATE RCMME

JCB appoints Arjun Mirdha as new North American ChiefArjun Mirdha to take up the position of President and CEO of JCB in North America as John Patterson CBE retires.

John Patterson, who rose through the ranks from field service engineer to Group Chief Executive, has led operations since 2008 as Chairman and CEO. He has retired from JCB after 43 years’ service.

John Patterson joined JCB in 1971 and went on to work in Canada and America before returning to the UK in 1988 as Managing Director of JCB Service. In 1993, John, was appointed Managing Director of JCB Sales before becoming Group CEO – only the third person in JCB’s history to hold the position.

John Patterson went on to become the company’s second longest serving CEO and in his 10 years in the role, sales broke the £1 billion mark for the first time, eventually reaching more than £2 billion by the time he stood down in 2008. He then became Chairman and CEO of JCB Inc based in North America.

JCB Chairman Lord Bamford said, “During John’s time as Chief Executive, JCB achieved unprecedented sales growth and led the company’s transformation into a truly global company. I thank John for his contribution over the past 43 years and am delighted he will remain a Director of the JCB Group and Chairman of the Board of the JCB USA companies.”

Under John Patterson’s leadership

as Group CEO, JCB opened facilities in Savannah, GA; Sao Paulo, Brazil; Pune, India and Shanghai, China. In 2010 he oversaw a $40 million investment in a new range of skid steer and compact track loaders which went into production at JCB’s North American HQ in Savannah.

John Patterson said, “JCB has made excellent progress in North America in recent years but there are many more opportunities to be seized and I wish Arjun Mirdha well as he leads the team as President and CEO of JCB in North America,” he adds.

Arjun Mirdha took up his new role from 1st January 2014, reporting directly to Graeme Macdonald, JCB Group Chief Executive. n


CASE STUDYFasteners

EJOT Fasteners making nuclear reactor safe

On 26th April 1986, almost 26 years ago, the worst case scenario happened in the number 4 reactor of the Chernobyl nuclear power plant. Ever since then a provisional sarcophagus has been securing the reactor. But the porous construction leaks water and dust can escape. It has been predicted to hold up for 20 to 30 years. The current stabilising construction work will protect the rusty protective cover from crumbling until around 2023. The new protective cover securely confines the remains for the next 100 years. It will be equipped with screws from EJOT.

In India, EJOT is a joint venture between EJOT Gmbh and Lakshmi Precision Screws.

New shield with EJOT self-drilling screwsThe new shield in the Chernobyl nuclear power plant is the largest movable structure ever built. In April the building work of the new sarcophagus began and the planned end date is summer 2015. The destroyed reactor will then be securely encased for at least 100 years. Construction directly over the old sarcophagus is not possible due to the high radiation on site. For that reason the shield is being built on nearby premises and will be pushed over the existing sarcophagus.

Quality and deliverableDuring the selection of possible suppliers EJOT was able to convince in two aspects. The company was able to answer

comprehensive technical questions in detail and EJOT also guarantees complete quality service. This means that all production and process steps are continuously monitored, starting with an incoming goods inspection of the

EJOT self-drilling screws make a contribution to highest safety of the Chernobyl reactor

Fig 1: Computer animation design section 1, Source: Novarka

Fig 2: EJOT SUPER-SAPHIR self-drilling screw JT3

62 g


CASE STUDYFasteners

raw material up to final inspection - the identity check. Here it is very important for the South-Westphalian company to meet the claim of quality leadership. Standardised manufacturing processes as well as in-house testing according to the specifications of the EOTA (European Organisation for Technical Approvals) are guaranteed.

Project descriptionName Chernobyl New Safe Confinement (or: The Chernobyl arc).

Project• Construction of a new shield

(sarcophagus) for the destroyed reactor block 4 of the Chernobyl nuclear power plant

• Largestmovablestructureeverbuilt.

Construction companiesEuropean Consortium Novarka was awarded the contract in September 2007.

Function of the shield

• Secure encasement of the reactorblock 4 for at least 100 years

• Protection from corrosion and other

aggressive environmental influences• Prevention ofwater penetration and

release of radioactive dust• Enabling the dismantling of the

unstable remaining structure• Enablingtherecoveryofthefuelrod

remains

Design• Provensteelstructuremadeof16arch

shaped braced metal pipe constructs to minimise repair and maintenance work.

• Installation of a crane for thedisassembly of the old sarcophagus.

• Attachedgablewallsenablepushingof the structure over the reactor.

• Adouble-walledouterskinisattachedto the structure in order to seal the inside from the outside and this way isolate it from weather exposure.

• External cladding and internalcladding; space in-between around 13.8 m

• Temperature and relative humiditycan be regulated.

DimensionsWeight: 29.000 tonnes, span: 257 metre; length:164metre;height:109metre

Design sections/time planningThe shield will be built in two design sections. These sections are again divided into four steps. The first part of the shield will be built between April 2012 and October 2013. The second half will be built between November 2013 and June 2015.

EJOT products usedSUPER-SAPHIRself-drillingscrewoftheJT3 family

Function of the EJOT products• Fasteningtrapezoidalprofilesonsteel

purlins• Fixingtheinnerandoutercladding• Fixingtheintermediateprofile(tophatsection)tothetrapezoidalprofile n

Contact:Nipun JainLPS-EJOTConstructionFastenersBusiness Development (Construction Fasteners)LakshmiPrecisionScrewsLtd.HissarRoad,Rohtak,Haryana - 124001 Mob:+91-9818077792E-mail: [email protected]

SKS Fasteners: preferred name in high-tensile fastenerSKS Fasteners Ltd., a Jay Bharat GroupcompanyisanISO14001:2004company,is one of the leading high-tensile fastener manufacturers in western Maharashtra. Located inChakan, Pune’s hub for autoindustries,SKSFastenershasfastemergedas the preferred, reliable supplier of high-quality fasteners for automotive and engineering applications.

Equipped with the latest multi-station part and bolt former and a battery of multi-station bolt formers, SKS has acquired the state-of-the-art technology to produce parts which were so far manufactured by cold heading and subsequent machining. Multi-station part and bolt former does not only impart better properties to the formed part but saves on the material wastage and machining costs. Bolts and screwsfromM6toM42withlengthsup

300 mm and equivalent in inch series, asperISO/ASTM/IS/BSstandards,areinthe manufacturing range of SKS.

The company has a modern, fully automated programme logic controlled surface plating plant. Toward its commitment to environment protection, SKS has commissioned one of the largest zinc-aluminium flakecoating plant, which is eco-friendly with no effluents. The coating enhances corrosion resistance of the products many folds with a salt spray life of minimum 500 hours and can go up to 1,000 hours. To test this corrosion resistance, SKS has installed cyclic corrosion testing (CCT) equipment. This testing machine is capable of simulating environment conditions as they appear in nature like corrosive environment, a high humidity as at sea level, totally

dry cyclewith temperatureup to 60Corsubzerotemperatureofupto-23C,thus subjecting the products to adverse atmospheric conditions.

SKS Fasteners is a licensee ofDurasok, the famous American brand of socketheadcapscrews.SKSFastenersand Durasok bring the world-class socket head cap screws to the Indianmarket. The product range consists of socket head cap screws from M3 to M42 and equivalent in inch series, flat socket counter sunk head screws and hex socket set screws with knurled points.

Its list of clients includes TATAMotors, Mahindra & Mahindra, Ashok Leyland,DanaSpicer,JCBIndia,GeneralMotors, L&T Komatsu, Piaggio and ZFIndia. n

60 f


PROFILEVentilators

Golden Turbovent combines natural and forced air ventilation system

Golden Turbovent is a unique and economical solution for all ventilation problems. This is a globally accepted technology. A combination of both natural and forced air ventilation system, it is a free spinning roof ventilator which works on free wind energy and functions as a natural ventilator when there is a difference in thermal or wind pressure between inside and outside the building which forces the air to move through the opening of the ventilator. The turbovent also acts as a forced ventilation system when it rotates to create a negative pressure within the building. The cold air from outside enters the negative space within the building to maintain an equilibrium condition.

The product helps in reducing the maintenance cost due to: • Heat trapped in ceiling space can

cause electrical wiring to dry and crack• Rising damp in winter may cause cracks

in plaster and damage paint work• Metal fitting on roof can corrode• Trapped moisture causes mildew

on ceiling and moulds on roofing tiles.

Features • No operating cost as it works on free

wind energy• Dual benefit of natural ventilation and

daylight• Free-spinning ventilator provides

fresh air in the roof space and living area at zero operating cost

• Light weight, strong and durable construction for resistance against extreme climatic conditions

• Maintenance free • Rigid Spider type frame construction

to withstand cyclone, storm and twisters

• Easy and quick installation on any roof profile

• Aerofoil blades to prevent water and dust ingress

• Dynamically balanced for frictionless rotation also at lowest wind velocity

• FRP Venturi Dome used with Turbovent provides natural light during day time, thus reduces lighting load

• Continuous positive extraction of the Turbovent eliminates heat, dust, fume penetration and a down-draught into the building to ensure a cleaner and healthier working environment.

ApplicationAutomobile industry, food industry,

Golden Engineering is one of the leading manufacturers and exporters of world-class wind turbo ventilators and sells under the brand name Golden Turbovent.

Exhaust Capacity

Wind Velocity

Turbovent – GT 21”/28”Exhaust capacity in

Turbovent – GT 24”/30”Exhaust capacity in

Litres/Second CFM Litres/Second CFM

04 Kmh 600 1270 CFM 700 1485 CFM

08 Kmh 800 1695 CFM 920 1950 CFM

12 Kmh 1300 2754 CFM 1500 3178 CFM

18 Kmh 1800 3814 CFM 2080 4407 CFM

24 Kmh 2300 4873 CFM 2650 5615 CFM

PROFILE Ventilators

Technical Specification

Model GT 21”/28” GT 24”/30”

Turbine Diameter 28 Inch (710mm) 30 Inch (760mm)

Neck/Throat Diameter 21 Inch (530mm) 24 Inch (610mm)

No. of Vanes(Blades) 36 Vanes 42 Vanes

Height 18 Inch (460mm) 18 Inch (460mm)

Base Ring MOC (Mounting Ring)

Stainless Steel 430 Stainless Steel 430

Top Plate MOC Aluminium 1.2 mm ThicknessAlloy 8011 H2

Aluminium 1.2 mm ThicknessAlloy 8011 H2

Vanes MOC Aluminium 0.5mm ThicknessAlloy 8011 H2

Aluminium 0.5mm ThicknessAlloy 8011 H2

Rotation Twin Sealed 6000ZZ bearings and self lubricating bush of Dupont Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity

Twin Sealed 6000ZZ bearings and self lubricating bush of Dupont Zytel 101L Polyamide 66 resin to ensure frictionless rotation even at lowest wind velocity

Center Shaft Stainless Steel 12mm Ø Stainless Steel 12mm Ø

Inner Arms M.S. with Powder Coating* M.S. with Powder Coating*

Outer Arms Stainless Steel Stainless Steel

Center Pipe M.S. with electro zinc plating M.S. with electro zinc plating

Nett. Weight 5.2 Kgs (Approx.) 6 Kgs (Approx.)

Gross Weight 7.5 Kgs (Approx.) 8.5 Kgs (Approx.)

Packing 5 ply seaworthy corrugated box size 28”x28”x19” 5 ply seaworthy corrugated box size 30”x30”x19”

textiles (spinning, twisting, sizing, weaving, dyeing, knitting, processing) chemical industry, engineering

industry (large size vessels/ tanks evacuation during welding), pharmaceutical industry, boiler house,

foundry, power generation house, restaurants, green houses, public halls, and residential spaces. n


PROFILEVentilators

Real Green Engineers popularising wind turbine roof air ventilatorsReal Green Engineers Pvt. Ltd, an ISO 9001:2008 certified company, is one of the leading manufacturers and exporters of high-performance wind turbo roof air ventilators, roof top ventilators, air ventilators, natural ventilators, eco-ventilators, attic ventilators and no power ventilators.

Wind turbine roof air ventilators perform continuously for 365 days and 24/7 in motion, utilising natural wind energy. Roof ventilators are totally weatherproof, dust and rain leak proof. They can withstand very high wind velocity and extreme climatic condition.

Running cost of motorised exhaust fans can be eliminated by implementing wind turbine roof ventilators which do not require power, electricity, motor, wiring, maintenance or running cost. Wind turbo ventilators are rigid and durable but lightweight and can be mounted on to any type of industrial roofs without disturbing the existing structure. Wind ventilators require very minimal wind speed available to function and perform. Natural ventilator provides a safe, cool, healthier and more controlled environment by removing the entrapped heat, smoke, dust, odour, industrial pollutant particles, moisture and dampness, ensuring better working environment and contributing better health and productivity to employees.

Model of turbo ventilator is recommended after considering MOC for turbo vents (aluminium or stainless steel), FRP/metal/polycarbonate for base, size and quantity depends on various factors such as wind velocity, temperature differential, humidity, environmental condition and location of the building, size of the building, air change and output required. Different sizes of wind turbo ventilators ranging from 16 inches to 32 inches are available which are recommended after considering the above facts. Turbo ventilators can be powder coated as per customers’ requirement. Third-party inspection can be arranged on request at its factory premises or warehouse.

Its products are manufactured under stringent quality check at every state of the production and especially designed and manufactured as per industrial specification and standards. They are also rigorously tested to

ensure durability and performance in extreme temperatures and high wind conditions. The raw materials and major components used for manufacturing air turbines are tested, treated, formed and assembled as per the existing industrial specification and standards. Real Green Engineers focuses upon delivery of high-quality, durable products along with superior client services, which offers its clients a competitive edge and creates value for their business.

Having a wonderful product and purpose, Real Green Engineers is confident of solving clients’ ventilation problems. n

Contact:Manoj Prabhakar,Real Green Engineers Pvt. Ltd.,No 1/2, R.A. Complex, Kammasandra Road, Electronic City, Bangalore - 560 100.Mob: +91- 9731264334www.realvents.com

TM

A-4/2/2, MIDC Chikalthana, Aurangabad-431 006 Maharashtra, India Tel.: 0240-2486501/02, Mob.: 9423781336, Fax : 0240-2485829


INDUSTRY SPEAKSFacade

Secure Access EverywhereEstablished in 1993, Cleanindia Group of Companies pioneers in façade access equipment manufacturing, supplying and maintenance. In an exclusive interaction with B2B Purchase, Ashok Khemlani talks about the market status, prevailing challenges and his company’s contributions.

Maintenance of facades for high-rise buildings is always a challenge. Could you brief us on the challenges faced in the maintenance of facades for such buildings? For working at height, the use of mechanised equipment in construction industry is in nascent stage. Firstly, the introduction of the products to access the façade was a problem. However the knowledge and also the use of systems are increasing very rapidly.

Secondly, India has rapidly moved away from developing straight line buildings to various types of shapes and slopes. Architects and developers are today constructing state-of-the-art buildings and there is no gap in façade designs in India and abroad.

Also due to economic slowdown in many parts of the world, coupled with initiative from Indian builders and corporate, many architects from different parts of the world are practicing in India. I dare to say that today as the facades go our Indian

Machine on top and cradle that has gone deep inside the building at Capital building, BKC

“Today, we are proud to say that let the architect imagine and provide his expression of art or desire in the building that he designs - we will provide a system to reach in,” says Ashok Khemlani, Managing Director, Clean India

70 g



architecture is ahead of rest of the world.

In today’s architecture access systems pose challenges. No doubt the solutions are always found. The problem remains in over simplification or an overkill. However, architects and corporate are becoming more knowledgeable on the subject.

Thirdly, in India, the practices that are highly unsafe are still being followed on high-rise buildings. Majority of the building facades are being accessed with bamboo scaffolding which is unheard of elsewhere in the world. Nearly all countries use safely assembled steel scaffolds or temporary access systems. Every year there are many deaths all over the country because of unsafe practices. Most of them go un-noticed in the country by media.

Lack of health and safety standards is one of biggest challenges in this country. The government do not specify

anything on the health and safety for working at height. The municipal authorities come and check the area, FSI etc. -They do not look at health and safety aspects at construction sites. The problem is - our culture does not permit to be careful.

There is another challenge that is ‘I can also do’ since there is no control. Many people get into enterprise saying ‘I can also do’ without understanding the hazards of it. Result is sub-standard products not meeting the minimum quality that is required for safe operations.

Due to opening up of economy, many global suppliers are in to the Indian market. But due to lack of any control on import quality, many a time the products we are getting are of poor quality. In case of façade cleaning, we are putting life of the people working outside the building in the open sky in danger and have no control.

So, considering the safety of working

at height especially in the air outside the building there is need for better specification, better control on imports and better standards on allowing the companies to sale their products in India.

What sort of competencies you have developed to give better services despite all these challenges?We have three companies. Cradle Runways is an engineering company involved in manufacturing of access equipment for all kinds of facades and installing it. Initially, we started by importing as a distributor. But realising the difficulties in importing and providing end-to-end services, we started manufacturing locally with technological tie-up with U.K.-based Cradle Runways International. In last two decades, we have developed efficient and cost-effective products which are most suitable for Indian market.

We also provide service for cleaning the building. Technoclean (I) Pvt. Ltd.

Gantry supplied by Cradle Runways for cleaning bull nose at Terminal 2, Mumbai International Airport

68 f

72 g



(TIL) is India’s first company in the field of façade cleaning and maintenance services. We have pioneered ‘Spiderman’ (abseiling technique) in India. We are servicing over 300 clients in 17 cities across India and cleaning over a crore square feet a month.

In addition, we have rental equipment for going from ground to up. TSP Access Rentals is India’s largest access rental company offering construction platforms and other access equipment to the building, glazing and painting industries in most cities in India.

Do you have any training centre for operators training?We have a training centre along with our factory in Khopoli, Maharashtra. Today we have more than 50 trained operators in market who have been certified and are practicing.

We are practicing safety very extensively. We don’t permit our workmen who are working on the height for cleaning to work beyond 8 hours to avoid accident due to tiredness. We clock the rope and access equipment. We feel manufacturing a

machine, giving it to people and then not bothering about its functioning and safety is wrong.

What sort of safety features you expect in access equipment?The equipment should be such that it should have more reasons to stop than work. The equipment should be tamper proof because the operators have a tendency to do short cut. Equipment like cradle should have tamper proof features include limit switch and over load device.

Practice and safety comes with certain cost, so is the market ready to welcome such costs?I am sure that they are ready to pay for safety. Today people are willing to pay a clear cut outline difference for safer equipment. But, there are some people who go for cheaper equipment those may be quite unsafe. There should be better methodology in procuring equipment. We all need to remember that the safety is not the only criteria, it’s the sum total. The people will always pay for the safety.

Should the developers and architects consult with façade maintenance

players during conceptualising any project?It is absolutely necessary. There are developers and architects who send us their preliminary rough sketches to check feasibility for maintenance. They have to provide techno economically viable project to the client.

Developers who are constructing iconic buildings they have to remember that such buildings will sustain if the façade is accessed and kept cleaned.

For example, ILFS, an iconic building done by Architect Hafeez Contractor, is a piece of architectural excellence. Obviously they have to look at its maintenance. They have an ideal system to reach the various areas of façade.

We have provided state-of-the-art, ideally suited, safe systems to suit the requirements of international airports in Hyderabad, Bengaluru, Delhi and Mumbai.

Today, we are proud to say that let the architect imagine and provide his expressions in the design of the building - we will provide a system to reach each and every square foot of the building. n

SunGreen ventilators improved IAQTurboVENTS, offered by SunGreen Ventilation Systems, is the wind driven ventilator providing energy-efficient, trouble-free general ventilation solutions for more than last two decades.

Its continuous R&D efforts led to the development of 100 per cent leak-proof custom welded conical aluminium base which is an ideal solution for better ventilation.

With an aim to offer quality product without compromising material specifications at a low cost, SunGreen has developed the 24-inch wind driven ventilator Model S1.

Its latest in HVAC solutions include precise evaporative cooling (PEC)

with custom-engineered air balancing techniques. Its evaporative cooling units are 100 per cent fresh air units, which are ideal replacements for air-conditioners in many areas. The advantages of PEC over conventional airconditioners is not only the tremendous savings in operation costs (upto 90 per cent savings) but also improved indoor air quality in the space due to the 100 per cent fresh air into the space in contrast to stale recirculated air in a conventional air conditioner.

SunGreen products are ideal for installation in industrial environment, office spaces, shopping malls, car showrooms, garment showrooms, gymnasiums, and sports arenas.

SunGreen pioneered fabric ducting systems in India as well indigenously manufacturing the same 10 years ago. Its PEC systems go well with TurboSOX fabric ducting systems which are available in a range of colour and shape adding aesthetics to the indoor space. Fabric ducting also helps avoid false ceilings which again is an extra cost leave alone the condition of space between the roof and the false ceiling. n

Contact:SunGreen Ventilation Systems Pvt. Ltd. 227 Kutchery Road, Mylapore,Chennai – 600 004, Tamil NaduTele: +91-44-24613146Fax: +91-44-42101119 Mob: +91-9677044016

70 f

An ISO 9001:2008 Registered

Pencil BricksDouble Varam Bamboo M Channal

Roofing Tiles

TailorRajwada Bamboo Roofing Ridges

UNISOFT PHERIPHERIALSUNISOFT PHERIPHERIALS

Double Rajwadi Over Laping Mini White House

UNISOFT PHERIPHERIALS

Corporate Office :- Unisoft Pheripherials, 3, Shreyas Anand Complex, Ashram Road, Nr. Kuvadava Road, Rajkot - 360 003 Gujarat Tel. +91.281.2450300 Cell. +91.90990 69903Email :- [email protected], [email protected], [email protected]

ROOFING TILES

ROOFING RIDGES

TAYLOR

M CHANNEL

PENCIL BRICKS

WALL CLADING

RAJWADI BAMBOO

MINI ROOFING TILES

ROOFING TILE FOR NATURAL LIVING..

Web :- www.taperlockpulley.com


PROFILERoofing

Superior, aesthetically appealing roof and wall-cladding profiles from LYSAGHT

Tata BlueScope Building Products, a business division of Tata BlueScope Steel, manufactures and markets roll-formed roof and wall cladding profiles as well as lightweight PEB structures. The division caters to the increasing and ongoing demands of the B2B industry with its LYSAGHT brand. For over 150 years, the brand has been providing superior quality roof and wall cladding profiles, structural products and accessories to the industrial, infrastructure and commercial segments world over.

The brand offers 10 roof and wall-cladding profiles and two decking profiles. LYSAGHT range of profiles include concealed fixed roofing systems with on-site roll forming facility, screw-down roof and wall cladding profiles, structural products such as decking systems and purlins as well as accessories.

The LYSAGHT range of roof and wall-cladding profiles includes:• Screw Down Profiles: These profiles

present a perfect blend of high strength, durability and outstanding design structures. These long lasting profiles are available in the form of–TRIMDEK 1015, CUSTOM ORB 990, BR-II, SPANDEK 935 and tile profile.

• Concealed Fixed-Roofing System: Concealed fixed-roof system offers on-site roll forming facilities and profiles in long spans. The system provides weather tightness, superior resistance to wind uplift and offers an innovative architectural appearance to the building. The brand offers three distinctive profiles in the form of

LYSAGHT profiles are ideal for application in the infrastructure, industrial and commercial applications.

Industrial Building with Lysaght Trimdek - Screw Down Profile

Stadium with Lysaght Flexlok - Concealed Fixed Roofing System

76 g


PROFILERoofing

FLEXLOK 400, KLIP-LOK 700 and KLIP-LOK 770. The additional feature of LYSAGHT KLIP-LOK 700 roof profile is its ability to mount solar photovoltaic panels with a specially designed clip.

• Liner Panels: They give a smooth surface finish and provide an aesthetically pleasing appearance to the buildings. The brand offers 2 distinct liner profiles: PANELRIB 1110 and FLEXICLAD 1110. The profiles are suitable for false ceiling and internal walling applications.

LYSAGHT brand has also established itself as an expert in re-roofing and retrofitting jobs. With expertise in construction and engineering, the

brand has provided these solutions for an area of more than 1 million square metres in the span of 7 years.

LYSAGHT profiles are ideal for application in the infrastructure, industrial and commercial applications. The profiles are manufactured from high-strength, superior quality raw materials such as COLORBOND steel and ZINCALUME steel. These extremely durable profiles offer design flexibility, thermal comfort and are available in a range of aesthetic colours with high SRI values.

The LYSAGHT brand has supplied over 3,00,000 square metres of cladding

for metro projects across the country. Some of the other prestigious projects that LYSAGHT brand has successfully executed in India include railway stations for Eastern and Southern Railways, BRTS bus stops in Gujarat, and industrial buildings for Mercedes-Benz, Ford Motors, Apollo Tyres and Siemens India. n

DION quality and aesthetics: perfect combination to match roofing needsDemands for modern, aesthetic building materials that are sturdy, tough, economical yet long lasting are increasing. Roofing materials too have undergone a sea change. More companies are opting for dynamic, international looks with superior quality. The DION ranges of ASA roof sheets have all the attributes of beauty, toughness, durability, fully life secure and true economy in the long run.

PropertiesASA parts have high gloss, good chemical and heat resistance, and high impact strength even at low temperatures. Typical heat-deflection temperatures for ASA are 180 to 220 F (82 to 104 C) at 264 psi. Tensile strengths are 4,000 to 7,000 psi; elongation at break, 25-40 per cent, flexural modulus, 220,000 to 250,000 psi; and notched Izod impact strengths are 9.0 to 11.0 ft-lb/in (at 73 F) and 4.0 to 6.0 ft-lb/in. (at -40 F).

Product featuresGood weather resistance, high heat resistance, good sound insulation, high impact resistance, good UV resistance, high flow, good impact resistance, good chemical resistance, flame retardant,

eco-friendly, easy to install and move, lightweight as well as cost-effective in Installation.

ApplicationsIt can be used in many applications both exterior and interior, i.e. factory building, warehouses, market, vehicle parking sheds, farm house, water resorts, cottages, chemical industries, anima house, construction house, schools, colleges, hotels etc.

APVC roof sheetsTrapezoidal wave profile are available

with the thickness of 1.5 mm, 2 mm, 2.5 mm and 3 mm; width of 13 m; length of 2 m, 2.5 m, 3 m, 3.65 m (also customisable up to 6 m); and colour with blue, white, grey, terracotta, ivory, green etc.

DION available product• UPVCmultilayerroofingsheet• ASA/APVCmultilayerroofingsheet• Colour-coatedroofingsheet. n

For more, visit www.dioninc.in; email at [email protected] or [email protected], or call +91-281 2460580

Trapezoidal Wave Profile

1130 mm

220 mm25 mm

60 mm

Roof Top Solar Mounting System on Lysaght Klip-lok Profile

74 f


TECHNOLOGYInsulation

Radiant heat barriers for thermal comfort

Energy efficiency in construction is important to everyone i.e. builders, owners and prospective users of public, commercial and residential accommodation. This combined with the fact that the number one challenge in the tropical climates in countries like India is to control heat gain, should make radiant heat barriers an integral part of building design to improve the overall comfort level in a building and reducing energy bills. ASHRAE Standard 55 defines Thermal Comfort as: ‘Thermal comfort is that condition of mind that expresses satisfaction with the thermal environment.’

From the definition of thermal comfort it is clear that it refers to state of mind that finds the surrounding environment satisfactory. The environmental factors that impact the feeling of human satisfaction are air flow or wind, air temperature, humidity and radiations from Sun or surrounding hot surfaces. Personal factors like clothing, adaptation to environment and activity level also have a bearing on the perception of comfort. People accustomed to hot climates are comfortable at higher temperatures as compared to people from cooler climates. Similarly, people feel perfectly comfortable in winter dress during winter and summer dress during summer in Air-conditioned Buildings although there is no seasonal change in the indoor environmental conditions.

In hotter climates like Indian summers, body must shed heat through sweat evaporation is natural way to maintain the thermal equilibrium. The

cooling efficiency is dependent on humidity that reduces the effectiveness of evaporative cooling. Humidity is the reason that renders July/August more uncomfortable as compared to May/Jun in spite of temperatures being higher prior to the onset of rainy season. During winters, body must prevent / reduce heat loss by having additional protective warm clothing, moving into a shelter to avoid wind chill or increase body heat production with increased physical activity. During winters, evaporation and humidity are minor factors while exposed body parts and wind chill are major factors for maintaining thermal balance as far as human comfort is concerned.

Radiation plays the most important role in creating conditions conducive to thermal comfort / thermal stress.

Radiation during winters may be soothing as everyone who has enjoyed the winter Sun knows, but the same solar radiation can lead to excessive heat load on the person during summers with attendant uncomforting experience and heat stress.

In order to understand the perception of thermal comfort by human body, we need to know the process of heat exchange between body and surrounding environment. A seated human body produces and dissipates about 100 W of heat energy into the surrounding environment and the energy produced would increase beyond 500 W for a person engaged in cardio-vascular exercises in a Gymnasium. If this transfer of heat for a seated person doesn’t lead to extra physical effort like sweating or shivering

Heat Exchange of the Body With the Environment

1 kW/m2 Short WaveRadiation from the Sun

RESPIRATIONRADIATION

CONVECTIONEVAPORATION

Dry Air

Wet Air 35OC

25OC

A properly installed radiant barrier under the roof is the best performing application and gives the best results with radiant barrier surface temperature getting reduced to just about 2 deg C above the ambient outside air temperature

TECHNOLOGY Insulation

to maintain the body temperature, environment is considered to be comfortable.

As per ASHRAE Fundamentals Handbook: ‘Skin temperature greater than 45 C or less than 18 C causes pain. Skin temperatures associated with comfort at sedentary activities are 33 to 34 C and decrease with increasing activity. In contrast, internal temperatures rise with activity. The temperature regulatory centre in the brain is about 36.8 C at rest in comfort and increases to about 37.4 C when walking and 37.9 C when jogging.’

Metabolic activity inside the body produces energy that is used

for muscular work or transferred to surrounding environment through respiration and skin. The heat energy exchanged by skin to environment comprises convective heat transfer to/from the surrounding air, evaporative heat transfer through sweat evaporation and radiation to/ from skin to surrounding environment. If the surrounding surfaces like walls/floor/ceiling have temperatures higher than the body temperature, the radiation exchange would result in net heat gain. If the heat produced by metabolic activity exceeds the heat consumed in muscular work and lost/gained during exchange with surrounding environment, the same would lead to increase of body temperature. This change of

body temperature is sensed by the hypothalamus in human brain, the god given thermostat to control body temperature. The body temperature is regulated by increasing blood supply to skin to increase heat loss or reduce blood supply and conserve heat loss through skin. If skin temperature gets lower than desired due to excessive heat loss, the hypothalamus triggers shivering and localised heat generation. If the internal temperature increases beyond a certain point, the hypothalamus triggers sweat generation to cool the body through evaporative cooling. We are quite good at sensing the skin moisture / perspiration with the associated feelings of unpleasantness and discomfort especially if involved in sedentary work.

Monthly average weather data for delhi

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Avg High Temp 21.1 24.2 30 36.2 39.5 39.3 35.1 33.3 33.9 32.9 28.3 23

Avg Low Temp 7.3 10.1 15.4 21.5 25.9 28.3 26.6 25.9 24.4 19.5 12.8 8.2

Avg Mean Temp 14.2 17.2 22.7 28.9 32.7 33.8 30.9 29.6 29.2 26.2 20.6 15.6

Nicol Comft Temp 20.6 22.2 25.2 28.5 30.6 31.2 29.6 28.9 28.6 27.0 24.0 21.3


TECHNOLOGYInsulation

Asymmetric or non-uniform thermal radiations in a building from cold windows in winter or hot ceiling during summers can lead to occupants feeling uncomfortable. As per ASHRAE Fundamentals Handbook: ‘People are more sensitive to asymmetry caused by an overhead warm surface than by a vertical cold surface. The influence of an overhead cold surface and a vertical warm surface is much less.’

Based on various field studies, Nicol has come up with an empirical equation to compute Comfortable Temperature. The Comfort Temperature (T comfort)is calculated from the monthly mean outside temperature (To mean) which is derived from the monthly mean of daily maximum (To max) and minimum (To min) from meteorological records. The comfort temperature is calculated using the equation

Tcomfort = 0.54xTo mean + 12.9

From the weather data from the meteorological records for Delhi as shown in the table, To comfortable for Delhi has been computed.

The same information is depicted graphically for ease of comprehension. Its clear from the graph the To comfort varies from low comfortable temperature 21 C in DEC JAN to a high comfortable temperature of 30 C during Jun Jul.

In almost all types of construction, roof has the maximum exposure to solar radiation and contributes the most towards heat gain due to large surface area getting exposed to the sun leading to extreme temperatures of roof surfaces. Roof temperatures reach upwards of 65 C leading to uncomfortable inside environment in unconditioned buildings. At peak times, more than 40 per cent of the energy that enters the conditioned airspace through the ceiling is the direct result of radiant energy being transferred from the deck to the top of the false ceiling. Radiant Heat Barriers like Double sided Aluminium Foil like Flamestop 138, are the most economical, efficient and long lasting

solution for minimizing heat gain from the roofs.

It is important to understand the simplicity of principle on which the radiant barriers work and their application in construction. Heat always travels from hot surface to cold surface by the three methods of heat transfer i.e. radiation, convection and conduction. The principle on which the radiant barrier functions is the same as that of Thermos Flask i.e. preventing heat transfer through radiation. Thermos Flask takes care of the other two means of heat transfer i.e. convection and conduction by having vacuum in between the two reflective surfaces. However, one doesn’t have to conduct an experiment with two thermos flasks, one without reflective insulation and another with reflective insulation to find out that convection and conduction play a minor role in heat transfer.

During hot summer days, the roof of a building absorbs solar radiation and then the heat is dissipated outside into the atmosphere through all the three means of heat transfer i.e. through conduction, convection and radiation and a significant portion to the inner roof surface through conduction resulting in increased inner roof surface temperature. The roof temperature keeps on increasing after Sunrise as the amount of heat energy gained is more than heat energy lost through radiation,

convection and conduction. The solar heat gained keeps on increasing with the increase in sun angle till a balance/equilibrium is reached with roof temperature reaching maxima for the day sometime in the afternoon with heat energy gained being equal to the heat energy lost. Subsequently, with the Sun going down sun angle reducing, the heat loss becomes more than the heat gain leading to reduction of roof temperature and the process continues till the next day morning till a minima is reached sometime after Sunrise.

As much as 93 per cent of the total heat gain from the roof is through radiation with conduction contributing the remaining heat transfer through roof and convection playing no role as a convective loop is not possible for heat gain through the roof. A properly installed radiant barrier under roof will stop as much as 97 per cent of radiant heat by reflecting 95 per cent of the incident radiations while transmitting just 5 per cent of the 5 per cent absorbed heat energy. On the other hand, mass/bulk insulation acts as a barrier for heat transfer by convection and can only slow down the process of heat transfer through conduction.

Roofing materials (RCC slabs or ACC/metal roofs) are often poor reflectors and good emitters of heat. The traditional roofing materials absorb as much as 90 per cent of the incoming solar

Average Mean Max Temp

Temp

eratu

re D

eg C

elcius

Average Mean Min Temp

Average Mean Temp

Nicol Comft Temp

Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

45

40

35

30

25

20

15

10

5

0

Nicol comfortable temperature graph for delhi

TECHNOLOGY Insulation

energy resulting in roof temperatures rising to levels as high as 65 C to 70 C during summers. The hot roofs start transferring the absorbed heat to the cooler surfaces inside the building through conduction, and radiation with radiation being responsible for more than 90 per cent of the heat gain. The inner surface of the heated up ceiling transfers the absorbed solar heat to all objects inside. The radiant surface temperatures of the walls and ceilings have a direct influence on the comfort level of the occupants and increased energy costs in conditioned buildings. Most energy conservation consultants recognize effectiveness of radiant barriers, in controlling heat flow from roof to the building’s interior.

A polished film of aluminium is the primary component of a radiant barrier system. Compared to ACC/Metal/RCC roofs with high emittance value 0.7 to 0.9, aluminium radiant barrier emits only 3 per cent to 5 per cent energy as heat radiant energy from its surface

when compared to non reflective ceiling surfaces. Thus, radiant barriers can effectively block 95 per cent to 97 per cent of radiant heat transfer from roof to inside.

There are several ways to install radiant barrier under the roof. It can be laid over the purlin in case of new buildings or under the purlin in existing buildings with ACC/metal sheet roofs. In case of RCC slab roofs, the process is similar to installation gypsum boards and it is attached with the help channels with an air cavity in between RCC slab and radiant barrier. A properly installed radiant barrier under the roof is the best performing application and gives the best results with radiant barrier surface temperature getting reduced to just about 2 deg C above the ambient outside air temperature and relief from thermal stress associated with high ceiling temperatures.

During a typical summer afternoon in the Sunbelt, a properly installed

under roof radiant barrier system will: • Reduce room temperatures by as

much as 6 C to 8 C in unconditioned buildings.

• Increase thehuman thermalcomfortlevel for the occupants of the building.

• Extendthelifeoftheair-conditioningunit.

In today’s market, with rising energy costs and increased consumer awareness in all areas of industry, it is important to market a product that is not only smart economics for the builder but also for the consumer. The builders that have adapted radiant barriers in their programs are clearly setting the benchmark in the industry for energy efficient and environment friendly green buildings with competitive advantage. n

Bibliography:

ASHRAE Standard 55

Climate of Delhi from Wikipedia

www.new-learn.info/packages/clear/index.html

(Source: Macmillan Insulation)


INDUSTRY SPEAKSInsulation

Fiberglass insulation: safe to useU.P. Twiga Fiberglass Ltd. has been in the business production and marketing of glass wool. Twiga manufactures fiberglass insulation products under technological license from Saint Gobain Isover, France. In an interaction with B2B Purchase, Biswajit Roy talks on the insulation products and technologies.

U.P. Twiga is a leading manufacturer of glass wool insulation in India having 25 years of track record. What is your outlook on the thermal and acoustic insulation market in India?Indian insulation market is set to grow as there are increasing awareness among various stakeholders like government authorities, architects, specifiers, builders and contractors. As India is looking forward to the reduction of energy intensity of GDP, we have no other option but to adopt high performing insulation solutions in industry and building sector. Ministry of Power and Ministry of New and Renewable Energy are working separately to implement energy efficiency programs like star labelling of appliances, glass (facade) and adoption of GRIHA (Green Rating for Integrated Habitat Assessment) rating in all upcoming building projects under central government. Not only this, in various places because of less availability of water for constructions, builders are slowly shifting towards dry constructions. Dry construction technology promotes high level of thermal and acoustic insulation. This in turn achieves significant reduction of heat load and good acoustic privacy. There are atleast 13 identifiable segments for insulation in India and different segments need different specifications to comply. Hence high standard of manufacturing technology is required for better flexibility in the products.

How to select insulation material and on what basis a decision is made? Design of insulation system is based on the following parameters such as:• Energy efficiency parameter. For

example, thermal transmittance for building envelope (roof and wall) and thermal resistance for ducts

• Acoustic parameters. For example,sound transmission class of system and acoustic absorption value of the product

• Fire safe parameters such as noncombustibility, least surface spread of flame, fire propagation indices, non toxic/smoke emission etc.

• Environmental parameters likerecycled content, life-cycle cost,

regional raw material acquisition, and least volatile organic compound.

• Application complexity such asinstallation, handling, product form and dimensions.

• Economyandon-timeavailability.

Decision on material is taken considering most or all of these design parameters at design or planning stage. However it also depends on the project dynamics at the execution stage.

Could you brief us on the advantages of glasswool insulation?Fiberglass wool insulation products are made of high-quality inorganic and non-combustible glass fibre in various forms such as blanket or boards, mostly laminated with high-performing facings. In the process of manufacturing the complete raw material is converted to 100 per cent pure fibre and hence free from slag, metal-shots or any un-fiberised elements. This ensures better quality, long-performing life of the product and its associated system.

General product features of fiberglass wool include high thermal resistance, high acoustic absorption, fire safety, hydrophobic-nature, chemical stability, shot free, and resiliency. Basic material has fire safe features like non-combustibility,

Twiga range of products• Twiga Insul: Fiberglass

insulation blanket products with aluminium or polypropylene based facing or unfaced

• Twiga Insul: Fiberglass insulation boards and slabs aluminium or polypropylene based facing or unfaced

• Twiga Insul: Preformed pipe section

• Twigaflexibleducts• Non-metallicHVACductboards• Marineinsulationproducts.

Being inorganic and non-toxic, Fiberglass insulation is completely safe to use when it is applied under specified guidelines informs Biswajit Roy, Manager- Building Solution, U.P. Twiga Fiberglass Ltd.

INDUSTRY SPEAKS Insulation

non-toxicity, limited or zero spread of flames (Class ‘O’ / Class 1). It is pure and does not settle down. In India it complies to general standards of IS: 8183,IS:3346,IS:3144 and IS:9842.

Environmental features include recycling of glass cullet from industrial waste, compressed packaging to reduce transportation cost and energy (also less packaging waste), reusability and long performing life.

How safe is the use of glasswool insulation?Fiberglass insulation is completely safe to use when it is applied under specified guidelines. This product is inorganic and non-toxic. As explained earlier, it has fire safe features that reduces fire load in buildings and also approved by Factory Mutual. This product had been manufactured worldwide for more than 60 years and evolved through various technological innovations. Twiga manufacture fiberglass insulation

products under technological license from Saint Gobain Isover, France and adopted world-class TEL technology in manufacturing. This helps to achieve best quality and safety standards in the insulation products.

What additional measures to be taken in building solutions to optimise use of glasswool insulation?Without appropriate installation methods insulation products cannot perform optimally. Insulation materials need to be protected from various weatherisation effects. Vapour, air and water barrier need to be incorporated along with insulation system judiciously wherever required. To maintain long performing life of the insulation material, specifically in high rainfall area it is suggested to use internal insulation system rather than external. Use of insulation can also be decided considering various factors like shading area, window wall ratio, building orientation etc.

What are the safety requirements and precautions to be undertaken in the use of insulation wools?In building segment normally bonded wools with laminations (aluminium, polypropylene, tissue or glass cloth) are used that significantly reduces fiber erosion. However if extensive cutting of the insulation is required, then mask and gloves should be used along with full sleeve cloths.

Do we have any safety standard in the use of insulation wools?In India Bureau of Indian Standard (BIS) develop insulation and other industrial product standards. There are hardly any standards on application of insulation products. IS 10556 is one document that recommends handling and storage practices of various insulation material. Most of the manufactures have their own material safety data sheet and application documents for insulation customers. n


Advertorial

Sauerland infill board: world’s timber substitute for infill materialIndia is a unique country which utilizes timber batten infill in the flush and skin doors, a primitive process discarded globally many decades back. According to a news report, unless the green house gas emissions are reduced; the temperatures in Mumbai will be at the historical extreme by 2034. Other Indian cities are not behind.

Time has come to say goodbye to our obsession for timber-filled doors. One may be aware that the concept of recycling wood scrap as an infill in doors is no more a

reality as the saw-mill operations are getting smaller with reduction of timber availability. On the other hand, there is an explosion of construction due the rise in housing needs all over India. More than 12 lakh trees every year are required to feed the infill needs of over 100 lakh doors each year. Realising the bare facts and non-sustainable practices, other countries have already switched to eco-friendly infill boards like the tubular boards which are 100 per cent made from recycled wood wastes. India should also change; it is too late already.

1. Sound insulation

The construction leads to almost 50 per cent reduction in sound passed via door compared to honeycomb filled door.

3. Thickness tolerance

Critical thickness tolerance of +/-0.1 mm in the board gives rid of telegraphing as the board calibrated board gives a beautiful surface finish and a good bond between the skin and the board.

2. Construction

The density in solid areas i.e. walls of board is high 520 Kgs/m3. Further the arch principle as in case of construction of dams or bridges give high impact resistance.

4. Weight reduction

Tubular boards give value weight to the door, making it ideal choice for high-rise buildings as well as provide better acoustical, safer door.

The tubular infill boards are an eco-friendly, green product initiative, replacing the 80 per cent of timber used internally as door infill which dramatically improves the performance of the door.

85B2B PurchaseFebruary 2014

Advertorial

5. E-1 emission

The only filler board available in India meeting the formaldehyde emission norm making it suitable for indoor use.

7. PEFC certified

Save the tree for reducing climate change. All Sauerland products are certified with PEFC.

6. Straightness

The tubular structure also helps the door in maintaining straightness under climatic variations.

8. Swelling in thickness

Almost zero thickness swelling in Sauerland board compared to flat-pressed board which expands in thickness, causing stress on skin bonding and rupture the door.

Sauerland infill board has been used by the door industry for 63 years as a timber substitute for infill material around the world in over 65 countries. It is reasonable to say that it is much older in use than the timber batten filling, common in India in the flush door industry. n

Contact:Sleek Boards India LLP,20, Landmark, 4th Floor,Paud Road, Kothrud,Pune - 411038.Tele: +91-20-25463471/25421021Fax: +91-20-25442559Email: [email protected] www.sauerland-spanplatte.de

AVIGIRIUrethane and Rubber Industries

Microwave-Cured EPDMOur quality-consciousness ensures that you receive only the best material for your gaskets needs. Our gaskets are capable of withstanding intense temperatures and are weather resistant so the Þnished products do not lose its properties with age.

300 Kgs/ HourOur German-design extruder is capable of a production capacity of 300 kgs per hour. This ensures that all your requirements are easily met and the turnaround time from placing the order to dispatch is minimum.

Management ExperienceAVIGIRI is a sister company that has been started in South India by a management team which has over 30 years of experience in the Rubber Industry. This includes extensive product knowledge as well as comfortable dealings with international clientele.

In-House Die MakingOur facility is equipped with the capacity to design and develop our own dies based on your requirements. Our design team has in-depth knowledge on product Þtment which completely eliminates rejections and decreases turnaround time.

Quality LaboratoryOur quality laboratory ensures consistent quality throughout production. We are equipped with all the relevant laboratory equipment to continuously monitor tensile strength and proÞle dimensions.

Mission Statement“AVIGIRI is dedicated to the rubber industry. We adhere to our values of Quality, Service, and Performance to become a dependable supplier for our client’s gasket needs. Our vision focusses on manufacturing reputable products that caters not just locally but internationally as well”“A facility that inspires innovation and planning ahead”

Company ProÞleAt Avigiri we take pride in belonging to the rubber industry. In order to cater to the continuous demand for quality rubber gaskets, we have established a state-of-the-art facility with the production capacity that can match any requirement.

AVIGIRI Urethane and Rubber Industries is a privately owned facility in Tumkur’s KIADB Industrial Area. We have the ability to manufacture any solid or cellular

gaskets having a cross sectional diameter between 1mm to 140mm.

Microwave-Curing Technique

There are many chemicals involved in manufacturing a quality extruded product. In order for these chemicals to react positively with the raw material, you require an inside-to-outside curing method to ensure the chemical stability of the Þnal product.

Microwave-Curing is the most efÞcient method to achieve this balance, which guarantees a Þnish that you can proudly associate with your product. Our EPDM gaskets are:

¥ Resistant to abrasion due to weathering¥ Resistant to temperature (-40C to +140C)¥ Resistant to Ultra-Violet Radiation

10-year GuaranteeAll our product dispatches are accompanied by a material certiÞcate and a 10-year guarantee:

¥ NO Cracks¥ NO Discolouration¥ NO Loss in tensile properties

Contact Us for a Free Sample of your requirement

ADVERTORIAL

QUALITY. SERVICE. PERFORMANCE.

AVIGIRI URETHANE AND RUBBER INDUSTRIES

Manufacturing in South India

High Quality Microwave-CuredEPDM Gaskets

foruPVC and Aluminium

Doors and Windows

169-D Vasanthanarasapura Industrial Area, Kora Hobli, 572106, Tumkur District, Karnataka

CONTACT

D. M. ManjunathaTel: +91 9845 004 311Email: [email protected]

Website: www.avigiri.com


PROFILEDoors & Windows

Nine Bearing UPVC windows and doors hardware: committed to qualityNine Bearing is one of largest manufacturer and importer of UPVC and aluminium hardware for institutional, commercial and residential application. The company has all the capabilities to supply qualitative and quantitative requirements for complete range of hardware product required for UPVC and aluminium windows and doors profile.

Nine Bearing has started the revolution in aluminium hardware in 2004 and in 2010 started UPVC hardware. Nine Bearing is leading this revolution with its constant innovation in products and application thereby setting benchmarks for the UPVC hardware industry.

Range of products• Manufacture all kind of aluminium

rollers• Import all kind of UPVC hardware

suitable for all kind of UPVC profile like Encraft, NCL wintech, Hanva, Fenesta, WEKA etc.

• Largest importer of UPVC windowsand doorrollers in all sizes

• ImportUPVCwindow rollerECOandECO2

• Import various type of handle likecasement handle, cockspur handle in different shapes and sizes, according to customer requirement

• Import all variety in hinges like 3Dhinges,2D hinges, small flap hingesand butt hinges

• Importvariousinnovativeanddurablelocks like touch lock, crescent lock etc.

• Importwoolpie andwhether stripinall regular sizes.

Features of its product• Timebondsupply• Any low quantity managed and

supplied if tools are ready• Nocompromiseinquality

• Supply as per clients demand andrequirements only

• Internationalstandardsandquality• Attractivepaymentmode• Wide marketing and distribution

network• Innovativedesignandsolution• Excellentcustomerservice• Genuine associates for its trading

products and rates• Stronger,longerbusinessrelationship

Quality controlNine Bearing has factory in Thane from where it caters to all over India. It hasspecial quality control department and decided some benchmark. Based on these, Nine Bearing has team which

check the quality of material before dispatch at site.

AchievementsNine Bearing has successfully rolled out the UPVC hardware in 2010. The company expected to startmanufacturing UPVC transmission rod by the mid of this year.

Doubling revenueNine Bearing is investing in India with long- and short-term strategies. These investments are in terms of offering new products from its Indianmanufacturing hub, better territory management, increasing its dealer in all overIndia. n

Nine BearingDoor Window Hardware

BEARING

Address: 43/45, V.V.Chandan Steel, 3rd Floor, Office No-21,Vadgadi,Mumbai-400003 Tel:- +91 22 23437790,Telefax: +91 22 4022280 E-Mail:- [email protected] / [email protected] Web: www.ninebearings.com/ www.upvc-hardware.com

Like ARES Commander Edition CAD software -- AAP ka apna CAD software.

ARES Commander Edition is affordable for the Aam Aadmi, and it actually delivers on the promise of a .DWG compatible, robust, production worthy CAD solution. CAD solution.

Make a resolution to try something new this New Year.

Toll free: 800 102 2737Ph No: 8527569990Web: www.graebert.inEmail: [email protected] [email protected]

Distributed by

Precision CAD Technology From Germany, now available in India

Kalzip TF profiles: combining unique facade design with optimum functionality

The sleek profiling of Kalzip TF facades enhances the sophisticated interplay of light and shade across all elevations, at the same time creates a distinct and unique overall appearance with a real sense of clarity.

The Kalzip TF profile provides planners and architects with a wealth of scope to create stunning buildings with a highly individual character. This is a perfectly systemised solution which is available in a range of colours and combines sophisticated, appealing aesthetics with optimum practicality.

Special system components are available which have been developed specifically for the Kalzip TF facade system. These components provide perfect interfaces with other building elements and systems.

Assembly and installationThe Kalzip TF profile is suitable for horizontal or slightly pitched building elevations. Fixing takes place within the narrow lower brace between the ribs - either inside each rib or in line with the longitudinal joints.

AttachmentFastener with JT3-FR-6-5.5xL E10 internal Torx drive, or irius dtive system SX-L12-A10-5.5xL or equivalent accepted by Kalzip Asia Pte Ltd.

Advantages• Unique, aesthetic design with a distinct “long view” visual

appeal• Lightweight and therefore economical in terms of both

cost and materials• Wide range of acoustic and thermal insulation options• Harmonised system components and interfaces• Available in a wide range of colours

Technical dataTF800R• Material: Aluminium• Grade: Min yield strength 185 N/mm²• Base metal thickness: 0.9mm, 1.0mm and 1.2mm• Weight: 3.69 kg/m², 4.10kg/m² and 4.91 kg/m²

Contact:Kalzip India Pvt. Ltd.310, 3rd Floor, Vipul Agora M.G Road, Gurgaon, Haryana -122002 Tel: +91-124-4848800 E-mail: [email protected]


PROFILEInsulation

Aerolam Reflective Insulation: a step toward greener atmosphere

Aerolam Insulations manufactures reflective insulations with the state-of-the-art infrastructure and world-class machineries. The company, which uses contemporary production processes, has delivered new product integrations with confidence and achieved a global footprint within one decade. The company has recently launched “Aerolam Optimum 20-mm thick big bubble” and “Aerolam Advance 10-mm thick big bubble”.

Its range of products provides surface insulations to pre-engineered building, industrial sheds, poultry farms and mega structures.

Aerolam Reflective Insulation Aerolam Reflective Insulation can be applied during the construction stage of any residential or commercial building. Its reflective feature has been prepared keeping an eye on the extreme weather conditions — hotter or colder. Foremost, it reflects the radiant heat of the sun, particularly in the warmer parts of the world and makes the inner atmosphere more friendly and comfortable. It also prevents inner cooler atmosphere, creating non-transmitting temperature barrier.

The colder regions can use the same product as well. It prevents

the inner heat transmitting outside and getting inner atmosphere colder. The reflective insulation material of Aerolam works as a thermal barrier on wall and roof. It also stops unwanted gain or loss of the temperature due to extreme weather conditions, eventually leading to the reduction of the energy consumption.

Benefits of Aerolam Reflective InsulationAerolam Reflective Insulation is a step toward greener atmosphere. It saves large amount of energy and fights against the global warming. By preventing unwanted gain or loss of heat, it also saves money required on running air conditioners and room heaters. nSingle bubble metallise insulation foil

Foil bubble insulation sheet

Aerolam Reflective Insulation is a step toward greener atmosphere. It saves large amount of energy and fights against the global warming.

Ajanta doors: ideal for all types of constructionNew Delhi-based Ajanta Associates is the manufacturer of quality PVC profiled doors with PVC frame and MS square pipe frame, which are quite sturdy and durable. The company uses high-quality PVC profile so that the doors can stand in open as well as inside accommodations.

The PVC profiled doors offered by Ajanta Associates are available in standard sizes i.e. 6 ½’x2 ½’, 6’x3’, 7’x3’. However, the company can supply customise doors as per clients’ r e q u i r e m e n t specifications if the order is of large quantity.

Ajanta PVC doors are available with and without accessories which are quite easy to install and maintenance. These are ideal for all type of constructions

such as homes, hospitals, hostels, hotels, resorts, farmhouses, labour hutments etc.

Ajanta PVC doors are available in quality lamination and without lamination; printed in beautiful design profile. The doors are not heavy and very smooth in movement.

Ajanta offers windows which are available with glass and PVC in standard sizes of 3’x3’, 4’x3’ and 4’x4’. The company also offers ventilators. n

Contact:Ajanta PVC DoorsTele: +91-9999859085E-mail: [email protected]


Satec Envir Engineering started its journey with manufacturing of shelters and towers; it expanded its business by entering into pre-fabricated structures and solar mounting structure. Today Satec is one of the premium names in the pre-fabricated structure market. It is growing at a phenomenal speed and has made a mark in the national and international markets. The company in true sense is positioning itself as next generation infrastructure company.

The core strength of its products, which are completely customised, is very economical as compared

to conventional buildings material and completely movable from one location to other. Satec’s pre-fabricated structure stand out as it never compromises on the quality of the products. Its products can withstand high winds and seismic zone.

Satec manufactures everything in-house and has invested in building a state-of-the-art production unit which spreads across 1, 40,000 sq. feet in Bhuj, Gujarat. Satec has top line PUF, continuous panel production machine, roll-forming machine, CNC plasma cutting machine, galvanising and power coating unit.

Satec is committed to innovation and offering multi-storey fabricated buildings which are made of combination of cement cladding and steel. These attractive, extremely strong structures can be made in small time span and also are more economical than the conventional buildings.

Satec has recently acquired contract of to supply per fabricated residential colonies in Bhutan as well as completed work in Africa and Australia for low-cost residential colonies. It is also part of a prestigious coal power project in Jharkhand for supplying conveyor gallery and trestle and currently commissioned for 30 MW solar power project in Surender Nagar, Gujarat.

Satec is committed to innovation and offering multi-storey fabricated buildings which are made of

combination of cement cladding and steel.

Satec Envir Engineering offering multi-storey fabricated buildings

Amar Prakash Agarwal, MD and Gaurav Agarwal, CFO,

Satec Envir Engineering

PROFILEPrefab

PROFILE Prefab

Looking ahead, Satec wants to work hand-in-hand with its clients as partners in their growth. As it believes that both internal and external clients are extremely important, it has left no corner untouched for safety and security of labour working at various sites and company.

Taking cues from the economic environment, Satec is continually upgrading its technology and striving to provide best solutions in pre-engineered, solar mounting modules and portable cabins verticals.

Popularity of low-cost housing gaining

Indian growth story is still robust in spite other developed economies across the world, facing a hard time, especially in the infrastructure segment. This is due to various capital projects been undertaken by big corporate and also government spending money on development of railways, roads and other infrastructure needs across the

country. In the 12th Five-Year Plan, the government has almost double the infrastructure development to 41 lakh crore.

These figures also motivate steel structure players and portable cabin industry in the country. Portable cabin are needed across various sectors where mining and railway constructions are

underway. These cabins can be easily re-located from one site to another and used for labour accommodation, site offices and storage area also. They are durable and can last even as long as 30 years if maintained well.

Satec is one of the leading names in the portable cabins industry with its promise of trust and quality. These


PROFILEPrefab

fully modular, mobile cabins are the intelligent, cost-effective and efficient solution to site offices and residences.

The remote and open topography of mining sites, leave it vulnerable to harsh weather conditions like dust, heat, torrential downpours and cyclonic winds. Satec’s portable cabins are made to withstand extreme weather, making it an ideal solution for offices and residences for the mining industry.

Satec has established expertise in installing portable cabins at such sites; Satec has installed a unique re-locatable labour colony for various mining industry players, also one of the project sites where 200 portable cabins were supplied for 400 engineers.

Satec is also undertaking a key project in Bhutan for multinational company and providing portable cabins for an upcoming hydro power project. The company is using portable cabins for site offices, labour accommodation and various other purpose of almost setting up a small township for its official on difficult mountainous area. The very fact that the company has opted out for portable cabins over conventional buildings proves the viability of product in long run.

These cabins have become a popular choice in the infrastructure sector due to their resilient nature and ability to withstand harsh weather conditions across the places. The polyurethane material which is used for building these panels has insulating qualities.

Satec has been providing turnkey solutions to many leading companies like GPCL, Essar, Sun Edision, and so on.

Leaping into futureToday pre-engineering solutions are becoming a common trend in industrial sector and with India’s economy growing at a modest yet optimist way, Satec sees huge demand for pre- engineered and prefabricated products and service.

Satec is manufacturing prefab

structure for over a decade now and has grown from providing telecom shelters to a leading manufacturer of sandwich panels, insulated roofing solutions, prefab porta cabins and shelters ground plus one building, solar mounting structures and pre-engineered buildings. The company believes in providing 360-degree solutions to its clients.

QualityProduct quality is crucial in this sector and Satec has ensured high quality through stringent quality norms and also has ISO 9001:2008 certification for quality management. Satec has in-house seven tank galvanising plant which ensures high quality zinc galvanising for solar and other pre-engineered products.

ProductionIts manufacturing unit has state-of-the-art machineries, and Satec ensures that all quality norms are adhering at its plant in Bhuj. The company provides customised products and has been working closely with its team of engineers and designers to ensure the cost efficiency of projects are kept intact. Its plant is well equipped with top of line panel manufacturing, and the company has two other lines for panel production which ensure timely completion of a project.

Latest technologyIts PEB manufacturing machines like H-beam manufacturing, automatic gantry type welding machine, H-type steel flange straightening machine and H-beam shot blasting machines are as per the latest technology practiced abroad. The company has always out preformed its competitors by employing latest international production technology.

These factors are seen working in its advantage to provide best solutions to its clients Satec has successfully completed various large orders in different segments of high-profile infrastructure organisation like Essar, JSPL, L&T, Marti, Welspun, Insolar, Juwi, Simplex and Ramboll.

Satec has done many innovative projects in the recent time. These include building ground plus one portable cabin for Jindal Steel and Power, Angul, Orissa. The ground plus one building structures helped create a comfortable home like stay for site workers and it was one of its kind design of low-cost housing design.

Satec has constructed several low-cost housing colonies for clients like Vedanta, Essar and JSPL extending to countries like Australia and Africa and now enters Bhutan. The company has gained trust in international market due to its reliable quality and excellent customer service.

Apart from prefab structures, Satec has started undertaking pre-engineered building projects. Company workshop is well equipped with H-beam welding machine and roll-forming machines for C and Z purlins. The company has capacity to undertake any size projects and is continuously striving for providing better solutions to its clients.

Satec has also undertaken projects in solar energy space and worked with leading solar power plant set-up by providing solar mounting module, including Narmada Canal Solar Power Generation Project. n

For more information, visit www.satec.co.in or mail at [email protected] or [email protected]

Polyklad: preferred solution for steel buildings

Polyklad India is a professional organisation with its corporate office and manufacturing facility in Bangalore is catering to wide range of applications across India for over 12 years.

Polyklad provides cost-effective turnkey solutions for design and construction of steel buildings and architectural steel structures along with required civil and interior works, designed to international standards.

With the production capacity of more than 6,000 tonnes, Polyklad’s state-of-the-art design and fabrication facility produces hundreds of customise steel

buildings, tensile and architectural structures every year.

Product rangePolyklad caters to a range of applications and turnkey solutions for steel buildings such as architectural services, earth/civil works, construction, project management. Its major products are:• Steelbuildings• Pre-engineeredbuildingsystems• Tensilemembranestructures• Skylights• Window,doorandfaçadesystems• Aluminiumandzincroofingandfaçadesystems.

Polyklad has product and technology tie-up with some of the world major product manufacturers such as Mehlar Technologies, Suhuco Aluminum,Tuflite, VM Zincand Euramax. n

Contact:

Polyklad India,No42,IndustrialSuburb,Yeshwanthpur2ndStage,Opp. Modern Bread Factory, Bangalore - 560 022, KarnatakaMob:+91-80-23572410/ 11, 41611640Email: [email protected]

With its pan India network, Polyklad established itself as preferred solution provider for any form of steel buildings and structures.


PROFILEChemicals & Coatings

CAC: emerging player in admixture firmamentThe company’s USP of unfailing product quality and continual R&D have propelled them among the best in the industry

Comparison of EnvoPlast with conventional river sand plaster

Description EnvoPlast River Sand 30% Wastage River Sand 50% Wastage

Qty Rate Value Qty Rate Value Qty Rate Value

UOM 1:4 ratio 1:4 ratio

EnvoPlast Bags (50kg) 1 250 250 0 0 0 0 0 0

Cement Bags (50kg) 1.25 cft

0 0 0 1 275 275 1 275 275

River Sand (1.25x4 = 5 cft) With 30% wastage 0.70x5 cft & for 50% wastage 0.50x5 cft Cft 0 0 0 7.2 80 576 10 80 800

Cost Per Sq.Ft. 24 250 10.416667 80 851 10.6375 80 1075 13.4375

A relative new entrant, though backed by a trail blazing presence in the raw material segment of this industry for the last 47 years, CAC is not really rookie in the construction chemical world.

With sheer dint of hard work at customer’s sites, continuously working at achieving technical perfection of product as required by every customer, CAC team lead by Satish Jaysankar at the commercial end and Sandeep Khedekar at the technical solutions end, Sankar Krishnamoorthy and Thiagarajan at the South, D.K. Naik, A.K. Jana and Tripathy at the North have made a presence that is now a significant and palpable one.

With manufacturing facilities ideally located in the Western, Southern and Northern India, CAC is at an advantage to cater to ready-mix plants located pan-India, with the shortest lead time. Within the last three years, CAC has become a name to reckon with.

CAC in JV with RD Ventures now launches EnvoPlast, an innovative readymade plaster in Mumbai which due to its eco-friendly ingredients have received a certification from Indian Green Building Council (IGBC). n

Contact: [email protected]

Additional Savings for 100 sqft

Description Qty Rate Value Qty Rate Value Qty Rate Value

Mason Nos 1 350 350 1 350 350 1 350 350

Helper Nos 1 250 250 2 250 500 2 250 500

Labour for Sand siev-ing/ Shifting/ lifting to floors Nos 1 250 250 4 250 1000 4 250 1000

Wastages on site 3% 800 24 5% 884 44.2 5% 1094 54.7

Additional fibre or plasticiser for cracks reduction Units 0 0 0 100 0.5 50 100 0.5 50

Opportunity Cost + inventory Carrying cost - 2% 0 0 0 2% 884 17.68 2% 1094 21.88

Total Cost 874 1961.88 1976.58

Cost Per Sq.Ft. 8.74 19.6188 19.7658

Total Cost Per Sq.Ft. 19.156667 30.2563 33.2033

Advantages of using EnvoPlast compared to conventional plaster • On-sitewastageofriversandonthe

dump site is a lot. The two scenarios discussed herein can quantify the economics.

• EnvoPlast ensures speedy work,saving labour cost.

• Savesonspacerequiredforstorage• Availability of river sand is a big

problem. EnvoPlast is the solution.• EnergysavingsbyusingEnvoPlast.• EnvoPlast is a green material as it

contains surplus materials from glass industry and foundries.

• Betterworkability and super finishusing EnvoPlast

PROFILE Chemicals & Coatings

Jotun Paints, one of the world’s leading producers and suppliers of paints and coatings, has announced the launch of its latest product range Fenomastic Hygiene, a premium interior product which has been formulated using cutting-edge technology to deliver long-lasting colours, protection against 22 different kinds of fungi and bacteria and significantly add to the hygiene factor.

Commenting on the launch Percy Jijina, Sales Director - Decorative, Jotun India Pvt. Ltd., said, “Fenomastic Hygiene is yet another innovation by Jotun India with sanitation a concern for many. Fenomastic Hygiene helps achieve the same in a unique manner by keeping the walls germ free along with being environment friendly. Fenomastic Hygiene also has high crack tolerance and good anti-flame spread.”

Outbreaks of illnesses due to harmful bacteria and fungi such as E.coli, Listeria sp., and the so called super bugs are constantly in news. In order to protect oneself from such illnesses, one ensures every possible preventive measure to maintain healthy and hygienic surroundings. Fenomastic Hygiene is one such effort toward promoting healthy living in a germ-free environment.

Mr Jijina further added, “Fenomastic Hygiene not only helps maintain the hygiene factor in the interiors but also helps maintain the environmental equilibrium by being very low on VOC. Fenomastic Hygiene is extremely useful in houses that have infants, children and senior citizens. It also serves as an important component in hospitals where health is a primary concern. Jotun has developed this product after rigorous research and a thorough analysis of the Indian market.”

Fenomastic Hygiene can be used in places like kitchens, hospitals, schools, changing rooms, and bathrooms where hygiene is utmost important.

Fenomastic Hygiene is extremely useful in tropical countries like India, owing to the hot and humid climatic conditions. n

Fenomastic Hygiene to ensure hygiene & durability


EXPERTS COLUMNChemicals & Coatings

Tips on maintaining floorsA home is more than just a brick and mortar structure; it is an extension of one’s personality and aspirational value. There are household who invest substantial amount of their time and money, ensuring a complete make over of the house but soon start noticing the cracks in their tiles or leakage from the bathroom walls which seeps into the dry area of a living room or bedroom leading to chipping of paints.

After investing money in possessing the dream home, a lot of efforts go in maintaining it so that the house looks beautiful and sparkling for years. One of the major concern areas is maintaining the flooring of the house. Even after cleaning, the tiles meticulously sometimes they look dirty.

These problems are common among most households, but the best way to resolve these issues is while you are initiating your interior work. Normally, the materials and components used in the bathroom to make its floor, wall including the service pipes and sanitary fittings are susceptible to natural movement as a result the materials made of clay and tiles could increase in size, affecting the joints and causing the tiles to shift.

To prevent leakage in dry walls and to protect water splash areas, one can use waterproof adhesive beneath tiles instead

of adhering it with cement. Cement generally tends to settle and contracts, hence causes cracking of tiles, hollow sound and debonding. Tiles should be adhered with a glass tile adhesive, which is 100 per cent waterproof adhesive and can even work underwater.

Very often people are looking for seamless tiling for their kitchens and bathroom. Whereas the tiles should be installed with a minimum gap of 2 mm. The cement, which is used to fill the tile gaps, turns black with fungal growth, giving the flooring a dirty look. Spillage of ghee, turmeric, ketchup and leafy vegetables is common in kitchen the same affects the tiling gaps and leads to decolorising of the cement.

While products like vinegar and soft drinks can lead to erosion of the cement. Most households are unaware of the impact of these products on their tiles.

Using a rainbow tile mate epoxy grout is the best way to fill tile joints in kitchen and bathroom. These epoxy grouts are called tile mate as they are stain resistant, antibacterial and non-cracking. Above all, they are CFTRI approved for their food-grade quality.

Kitchen and bathrooms are highly exposed to temperature variations which generally lead to contraction in

cement joints, leading to breakage of tiles, chipping off the cement filling etc. These RTM epoxy grouts then act as a permanent waterproof joint filler that can sustain temperature upto 100 C.

Unlike cement, these epoxy grouts are stain resistant and available in 22 shades. They can be used in contrast colors of the tiles as that adds to the effect of the kitchen and highlights the kitchen or bathroom tiling.

While there are plethora of products available in the market to keep it clean, some of them could be actually harming your flooring. It is advisable to avoid harsh chemicals on tiles to remove stains or dirt and maintain the shine. Using something like a Roff Ceraclean can help as it has been specially made to clean the tiles and ceramic wares, e.g. wash basin. Its pH is well balanced to remove those tough stains of hard water and paint and keep floor looking fresh and ensure its durability for years. n

Authored by—Sanjay Bahadur, Global CEO - Construction ChemicalsPidilite Industries

Admixture of new generation

Chembond Chemicals Ltd. offers KEM SUPLAST PCE 200, a polycarboxylic ether (PCE) based, high range superplastering admixture for concrete. The product has been primarily developed for applications in high performance concrete where the highest durability and performance is required. It is free of chloride and low alkali. It is compatible with all types of cements.

Applications• High strength concrete• High performance concrete• Production of controlled rheology concrete• For attaining high workability without segregation or

bleeding• Ready-mix and precast concrete• Concrete containing pozzolans such as microsilica,

GGBFS, PFA as well as high-volume fly ash concrete

Advantages• Increase in early and ultimate strengths, higher e-modulus,

improved adhesion to reinforcing and stressing steel• Excellent workability at optimum dosage.• Better resistance to carbonation and other aggressive

atmospheric conditions• Lower permeability - increased durability• Reduced shrinkage and creep• Elimination or reduction of vibration and reduced labour

cost in placing.

Ensuring concrete reliabilityIt is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticising effect and water reduction are higher if the admixture is added to the damp concrete after 70 to 90 per cent of the mixing water has been added. The addition of KEM SUPLAST PCE 200 to dry aggregate or cement is not recommended. Thorough mixing is essential and a minimum mixing cycle, after the addition of the KEM SUPLAST PCE 200 VM, of 60 seconds for forced action mixers is recommended. n

“KEM SUPLAST PCE 200 is an admixture of new generation based on modified polycarboxylic ether,” Deepak Kanitkar, GM & Head Technology, Construction Chemicals Division, Chembond Chemicals Ltd.



Aura Series: new generation concrete admixture

For more than 50 years, Fosroc has developed intellectual properties in specialised products and services that are acknowledged to be the cutting edge of construction technology.

Fosroc is an ISO 9001:2000 and ISO 14001 certified company, which ensures that the quality of all Fosroc products and services are on par with the highest standards in the concrete industry.

Demand scenarioParamount demand from construction technology is compressive strength of concrete and wet properties such as workability retention and rheology (pump ability), and concrete should be free from segregation and bleeding. Due to limitation in water reduction capacity of conventional admixture, production of low water cement ratio concrete for high strength was not possible.

In order to fulfill these requirements, Fosroc introduced new generation technology using polycarboxylate ether (PCE) based admixture into the market.

Fosroc’s Aura Series PCE technologyAura Series products have been designed based on the market requirement, using PCE technology. Using Aura Series products, one can

Fosroc introduced new generation technology using polycarboxylate ether (PCE) based admixture into the market

Precast metro segments

104 g



produce best concrete with low water cement ratio. This cement can be placed in most intricate formwork or congested reinforcement without the aid of vibrator.

Aura Series product are specially formulated by altering the molecule structure, grafting other polymers into the basic trunk polymer in order to match the specific performance requirements such as setting time, slump retention and very high water reduction.

Product range under Aura seriesAuramixAuramix is designed for cast “in situ” concrete, having low water cement ratio, high workability retention and excellent rheological property for pumping concrete to high-rise buildings.

Auramix 300Medium solids content PCE-based concrete admixture for wide range of workability retention requirements.• Higher E modulus • Improved adhesion to reinforcing and

prestressing steel • Better resistance to carbonation• Lower permeability.

Auramix 350Low solid content PCE-based admixture for normal concrete.• Low viscosity admixture

suitable for pumping different grades of concrete to greater heights

• Better resistance to carbonation• Reduce shrinkage and creep• Increase durability.

Auramix 400PCE-based admixture for low water cement ratio and suitable for self-compacting concrete.• Low viscosity suitable for pumping

of different grades of concrete to higher floors

• Improved adhesion to reinforcing and prestressing steel

• Reduced shrinkage and creep• Increased durability

Auramix 500PCE-based concrete admixture for ultra-high strength concrete, having low water cement ratio and high cementatious content.• Self-compacting concrete• Pumpable concrete to greater

heights• Concrete requiring long workability

retention.

AuracastAuracast is designed for concrete produced in precast industries which exhibits high flow and high early compressive strength.

Auracast 100

PCE-based admixture for general purpose admixture precast industry.• Improved adhesion to reinforcing and

prestressing steel• Better resistance to carbonation• Lower permeability• Improve surface appearance.

Auracast 270PCE-based admixture for precast industry for concrete, having moderate slump retention and early high strength.• Low viscosity admixture suitable for

precast industry• Suitable for concrete having cement

replacements and low water cement ratio

• Better resistance to Carbonation

Advantages• Veryhighwaterreduction,suitablefor

high-performance concrete• Range of products to suit for normal

workability vibrated through to self-compacting concrete, semi dry precast processes and industrial concrete floors

• Very longworkabilityretention(2-3hours) without excessive retardation

• High early age strength can avoidstem curing

• Improved surface finishes withsharper arises

• Verylowstickiness,idealforpumpingof concrete in high rise building

• Compatible with high cementreplacements such as GGBS, fly ash and micro silica

• Compatible with 100 per cent crushsand

• FulfillalltherequirementsofEFNARCspecification for self-compacted concrete. n

Contact:Fosroc Chemicals (India) Pvt. Ltd.,SapthagiriPalace,No38,IIandIIIFloor,12thCross,CBIRoad,GanganagarNorth,Bangalore–560024.www.fosroc.com

Pavement quality concrete

102 f



Hindustan Coatings: specialty chemicals to protect surface

Hindustan Coatings develops and supplies specialised coatings for original equipment manufacturers in various industries include chemical plants, power plants, auto ancillary units, engineering industries for their auto or machine finishes and protective coatings with aesthetic appearance to components and equipment manufactured by them. These coatings are also used by core sectors like auto industries, steel plants,

cement and chemical plants and allied industries.

Technical know-howHindustan Coatings is obtaining technical know-how from Prof. Khanna of IIT Powai, who is having experience of more than two decades in R&D with world’s leading societies like SSPC and NACE for developing specialty coatings. The company is also in the process of obtaining ISO certification.

“Our USP has been to undertake assignments of new coating developments for specific requirements of customers free of charge subject to the requirement being regular and viable and help the industry save their valuable time, money, and material,” the company said in a statement.

Painting capacity, testing and R&D facilities

• Hindustan Coatings boasts of good painting set-up with latest state-of-the-art machinery and present coating capacity is 10,000 sq. ft. per day for industrial and specialty coatings. The company plans to double this capacity in the next few months.

• Have excellent testing facility and in-house well equipped R&D laboratory for conducting quality tests of paints as per relevant IS/ASTM standards.

• Finish, gloss, hardness, adhesion, heat resistance, acid/alkali solvent resistance tests for cured paints are conducted before dispatch of every lot.

PU, Epoxy and EPU-based floor toppings

Besides being specialists in protective coatings, Hindustan Coatings has canned the problems associated with concrete floors for the protection against physical and chemical abuses. It offers PU, epoxy and EPU-based floor toppings – thin, thick, trowel and flow applied systems such as thin coatings, trowel applied coatings, self-levelling toppings, slip resistant coatings, breathable eco-

Besides being specialists in protective coatings, Hindustan Coatings has canned the problems associated with concrete floors for the protection against physical and chemical abuses.

Plant Coatings

Pipeline Coatings Structural Coatings

108 g



friendly coatings, chemical resistant floorings, UV resistant floorings, and ESD floorings beside others.

Plural component hot melt spray epoxy liningHindustan Coatings offers copper slag blasting and high performance epoxy lining through plural component hot melt rotary spray gun equipment for its specialist clients requirements to achieve 1,500 micron DFT coating.

Grit blasting and coating application procedure Copper slag grit blasting: Different chemistries lead to different operating results depending on the size and hardness of the grit. However the standard procedure of sand blasting is carried out by copper slag grit blasting with various sizes to achieve 50 to 70 microns profile as well as finishes as per SA-2 ½.

Steel grit: Steel grit blasting is ideal for aggressive cleaning applications. Steel grit quickly strips different types of surface contaminants from steel and other foundry metals. Steel grit is softer than aluminium oxide and does not fracture as easily, making it ideal for internal pipe line applications. The angular nature of steel grit produces an etched surface on metal for superior adhesion of paint, epoxy, polyurethane and other coatings.

Since Kramer is a primary steel grit supplier, multiple chemistries of steel grit are available. Steel grit that is formulated as a softer (40-50 HRC) metal rounds off rapidly, making it ideal for quick stripping of oxides and cleaning of moulds. Harder steel grit (55-65 HRC) maintains the angular nature of the grit to provide continuous cutting action. This coating of paint improves their corrosion resistance. The paint system consists of a two-part epoxy resin mixture when properly mixed and applied. n

Plastic Coatings

Solar Insulation CoatingCubic Velvet Coatings Waterproofing

Blasting Epoxy Flooring

Characteristics of spray applied elastomeric, solvent-less epoxy coatings applied by plural component airless spray:• 100 per cent solids, no VOC• Fast reactive, pot life in seconds to few minutes• Fast application: applied by plural component

airless spray• Unlimited film build: 200 microns to 1 mm, 2 mm

and above.• Exceptionally resistant to most chemicals• Excellent physical and mechanical properties• Non-toxic: approved for contact with potable • Monolithic, with extremely low permeability• Low friction improves fluid flow characteristics• Fast return to service can be put into service

within minutes of application • It finds extensive uses in application areas where

high-build coatings are needed to protect steel or concrete structures against aggressive corrosive environments. Protects against microbiologically induced corrosion (MIC), making it ideal for municipal wastewater applications

• Being non toxic, it finds uses in municipal drinking storage applications storage tanks, water and wastewater pipelines, wastewater treatment & collection, buried tanks, potable water treatment & storage, concrete structures, concrete tunnels, railcars & tankers, ship hulls, ballast tanks & decks, cooling towers, offshore pipe lines, and mounded bullets.

106 f



Centrilit NC: MC-Bauchemie’s solution to improve durability of concrete

MC-Bauchemie stands for sophisticated products and system solutions. Since 1961, MC-Bauchemie has been strengthening its position as the manufacture of construction building chemicals. In an interview with B2B Purchase, Sunny Surlaker shares how a bright toned, aesthetic concrete surface can be achieved.

Improving durability of concreteApart from the range of concrete super plasticizers, which influence the properties of fresh concrete in workability and workability retention, MC-Bauchemie believes in improving durability of the concrete. To improve this aspect of concrete in terms of improved constructability, excellent durability, reduced maintenance and time, MC-Bauchemie has developed Centrilit NC to impart these properties to the concrete.

Centrilit NC (nano-crystalliser) is a pozzolanic concrete additive based on amorphous aluminosilicate. It consists of a synthetically manufactured material, not an industrial by-product. Apart from a high uniformity, a long-term availability is also ensured. Centrilit NC

is available as a 50 per cent suspension (slurry) or as fine powder.

Making homogeneous concreteCentrilit NC can be mixed fast into the concrete. The particle size is significantly smaller than the particle size of cement. The particles more or

less completely fill the fine cavities in the hardened cement paste, depending on the grade of dispersion. Not only the concrete strength, but the concrete density is also increased by the pozzolan. The chloride migration is reduced; the resistance against detrimental substances is improved; and the durability of the concrete is generally increased. Centrilit NC makes the manufacture of very homogeneous concrete possible. Thus the surface quality can be optimised. A bright toned, aesthetic concrete surface can be achieved.

Benefits for Centrilit NC• Providesexcellentwatertightness• Reduces chloride ingress and

carbonation• Increases sulphate resistant of

concrete• Enhancedworkabilityandfinishingof

concrete• Reduced shrinkage, due to “particle

packing” making concrete denser• Improved colour by lightening the

colour of concrete, making it possible to tint concrete integrally

• Endlessquantities• Factorymadehomogenousproduct• Betterworkability• Reduced dosage of super plasticiser

as compared to similar mineral admixtures

• Betterpumpability.

Optical Finishes: UHPC Park Benches

“Centrilit NC makes the manufacture of very homogeneous concrete possible,” says Sunny Surlaker, Head - Admixtures Division, MC-Bauchemie India Pvt. Ltd.

PROFILE Chemicals & Coatings

Tried and tested reliabilityThe use of this type of material is historic. Use of calcined clays such as Centrilit NC in construction for mortars and concrete dates back in 1000 BC. For example, the water storage “Cisterns” unearthed in Jerusalem makes use of a waterproof mortar consisting of fired-brick powder (calcined clay) and hydraulic limes. This

3,000-year-old principle was also used to develop cements and cementing mortars in Germany ca. and Great Britain ca.

Modern studies and usage examples have also proved reliability of Centrilit NC. Applications have included UHPC park benches, cladding panels, Budapest central STP, other STPs and

pipe companies across Europe.

Ensuring concrete reliabilityThe quality control can be maintained and variations in the material can be minimised. Concrete reliability, as always, is a combination of various factors such as production, mixing and placing. Efficient site quality control works best. n

Application in STP Concrete Acid Resistant Concrete for Pipes -Pipe Jacking



Antirust solution for paint applicators, steel fabricators and rebars

Promtech Chemicals Pvt. Ltd. and Innovative Coating Industries offer the rust converter RUSTOFIX 1411 and ZINKOTE -20 zinc rich paints/coatings for mild steel engineering fabrications and structures. Both products are developed on the latest technology available and offer outstanding corrosion resistance life for the coated structures. The combination coating have passed 1,000 hours of fog chamber salt spray test and can resist every type of corrosion, including marine and salty atmospheres to chemical fumes and high humidity conditions.

Surface preparationsThe preparation for rusted and non-rusted steel (C sections, I beams and pipes/angles used for all heavy engineering fabrication) is done by complete removal of oil and grease (if present) and a light wire brushing to remove the existing loose rust (oxides of iron).

RUSTOFIX 1411Apply one coat of RUSTOFIX 1411, a rust converter cum rust preventive cum a primer coat. This has a good adhesion on all types of steel and provides a 12-15 micron primer coating which is bluish, brown and black. Since this takes the iron metal to its last form (adherent rust is converted to ferrosoferric oxide, an inert complex, and forms a barrier coating, allowing no more rusting of

steel due to atmospheric oxygen or moisture in atmosphere.)

Water-based RUSTOFIX 1411 contains complex (chelating) agents, driers, levelling agents, preservatives and polymerisation boosters. It dries in 10-15 minutes and is non flammable. It covers 120 sq. feet per litre.

RUSTOFIX 1411 can be used by

spray/dip, brush and swabbing. The black coating is absolutely adherent and shall not be washed. This coating dries within 8 hours and can be overcoated after 24 hours. Subsequent coating is optional. Steel will remain rust protected even after this single application. Overcoating with any high-grade paint, zinc-rich paints, CRPs, epoxies and modified alkyd paints will increase anticorrosion life of the metal.

ZINKOTE 20The rust-converted steel shall be

overcoated with ZINKOTE 20, a zinc-rich paint used for cold galvanising touch-up. ZINKOTE 20 is manufactured by use of pure acrylic resin and 99 per cent pure zinc metal flakes which have horizontal packing in the dry film. Zinc metal, being extremely passive to any chemical action or oxidation,

completely stops any further corrosion or attack of atmospheric oxygen, saline water, humidity in air, or chemical vapours and fumes on the coated steel sections and fabrication.

Its single coat offers 18-20 microns of zinc and double coat, if necessary, may be applied after 24 hours. ZINKOTE 20 is an instant air-drying paint; hence, unused tins should be always tightly closed to avoid losses due to evaporation. The coating shall confirm to most of the requirements of national as well as international standards.

ZINC BRIGHT in 500 millilitre aerosol format also offers silver bright finish cold galvanising on damaged/ scratched galvanised surfaces. n

Contact:Innovative Coating Industries,B-7 / 701, Vedant Complex, Near Vartak Nagar Naka, Thane – 400606Tele: +91-22-25883265/6958www.mypromtechaerosol.comPradeep Vaidya: 09820181738 Email: [email protected]; [email protected] Sonia Vaidya: 9819813015Email: [email protected] Rusted MS Panel Rustofix 1411 Rustofix + Zinkote


Grundfos Pumps India Pvt. Ltd. (Grundfos India) is one of the leaders in sustainable pump solutions and has a wide range of solar pump offerings. The solar submersible pumps family of SQ Flex range, SP with external AC/DC controller and the solar surface mounting pumps of CR flex range are an environmental friendly water supply solution and is a revolution in remote water supply and agriculture. These pump systems offer the perfect water supply solution in remote areas where water is scarce and the power supply is non-existent or unreliable.

The solar submersible SQ Flex is more than just a pump – it’s a complete system. Thanks to its built-in electronics and protections, the pump is compatible with

both DC and AC power supply without requiring an external inverter. The solar submersible SQ Flex pumps are fitted with a permanent magnet motor which enables the efficient use of energy from nature.

The SQ Flex /SP Flex (submersible bore

well solar pumps) and CR flex (surface solar pumps) systems can be adapted to any water supply need according to the conditions of the installation site as they are very light weight and flexible with regard to the energy supply and performance.

Very light weight, flexible as to its energy supply and performance; both SQ Flex and CR flex system can be adapted to any water supply need

according to the conditions on the installation site. With a wide range of operating voltages both on DC and AC source of input supply (1*30-300 VDC PE or 1*90-240 VAC – 10 per cent / +6 per cent., 50/60 Hz) this pump set is an engineering marvel providing water at nearly 5,000 installations across India.

In fact, upto 4kw submersible / surface pumpset, Grundfos controllers require low MPP voltages which directly translate to lower project costs with lesser number of solar panels requirement. Early starting of pumpset will eventually lead to higher water production in a day.

Grundfos solar solutions exist for upto 18.5-kw both with submersible and surface pumps. n

CR Flex SQ Flex

FeaturesSQ Flex(Solar submersible pump with built in inverter, frequency converter and motor protections)• Can operate on Solar,wind , genset,

battery and single phase AC power source

• Deliversbetween50to19,000LPH@heads between 2 to 250 m

• Operates at 30-300 VDC and 90-240VAC single phase

• InputPowerrange:40to1,400W.

CR Flex(Solar surface pumps with built in inverter, frequency converter and motor protections)• Can operate on solar, genset, and

single phase AC power source• Delivers between 1000 to 32000LPH@headsbetween2to150m

• Operatesat30-300VDCand90-240VAC single phase

• InputPowerrange:70to1750W.

SP Flex(Solar submersible pumps with external inverter, frequency converter and motor protections)• CanoperateonSolarandthreephase

AC power source• Deliversuptoamaximumof180,000LPH@headupto500m

• Motorcapacity:2.2KWupto18.5KW.

Grundfos solar pumps offer the perfect water supply solution in remote areas where water is scarce and the power supply is non-existent or unreliable

Solar submersible pumps: water supply solution in remote areas

PROFILEPumps & Valves


INDUSTRY UPDATEPipes & Tubes

MSL achieving seamless growth

Maharashtra Seamless Ltd. (MSL) has pioneered in Seamless pipes manufacturing in India. Then, in 2000, the company forayed into manufacturing of ERW. Now MSL plans to set-up its own steel billets mill to meet captive consumption, informs Saket Jindal, Managing Director of the company.

Maharashtra Seamless Ltd. (MSL), the flagship of the D.P. Jindal Group, is one of the largest manufacturers of Seamless pipes and tubes in India. The turnover of the company for the year ended March 31, 2013 was approximately ` 1,722 crore. Since its inception in 1988, in its continuous endeavor to excel, MSL has upgraded itself by adding latest facilities and technologies and in the process set number of milestones.

Over the years MSL has been meeting the requirements in important sectors like oil and gas, hydrocarbon process, power, and automotive etc. in domestic and overseas markets. Today, MSL is a well-known brand in India and abroad.

Product rangeERW: 21.3 mm – 508 mm ODSeamless: 10 mm – 508 mm OD.

ApplicationsERW: Oil and gas, water and sewage, power, structural Seamless: Oil and gas, refinery, power, automotive, bearing, mechanical, structural.

Demand-supply scenarioExplaining the demand and growth drivers of ERW and Seamless pipes, Saket Jindal, Managing Director, Maharashtra Seamless Ltd. said, “Both ERW and

Large diameter Seamless Pipes & Tubes

INDUSTRY UPDATE Pipes & Tubes

Seamless pipes caters to the basic growth sectors. There is a perpetual growth in demand of power, fuel, water, transport, and construction sectors all over the world so also the demand for ERW and Seamless pipes.”

Seamless gives better revenueAccording to Mr Jindal, “ERW has less CAPEX and less manufacturing cost in comparison to Seamless. So competition in ERW is more than Seamless. Hence, the revenue from Seamless is better than ERW.”

However, he observes, with increase in competition and cheaper sources from China; the revenue from Seamless pipes has gone down in recent years.

Diversified focusApart from getting expertise in ERW and Seamless pipes, MSL has ventured in to speciality products like coated pipes. Commenting on this development, Mr Jindal said, “Pipelines require coating for protection from corrosion and damage

and extend life. So launching coated pipes is a natural extension of our product-line.”

Advantages SeamlessSeamless pipe does not have a seam or weld like ERW pipe. Therefore it offers better strength to withstand higher pressure, temperature, load, and vibration.

Talking on the unique advantages of MSL ERW and Seamless pipes, Mr Jindal said, “We have a very strict quality assurance and control system and we don’t compromise on quality. Our products are of superior quality and international standard.”

Production facilities and capacitiesMSL has one ERW and three Seamless mills in Raigad, Maharshtra with capacity of producing 2,00,000 tonnes ERW and 5,50,000 tonnes of Seamless every year.

The manufacturing technology and major machineries at MSL are sourced from Mannessman. For ERW, the

company has high frequency welder and for Seamless, it has CPE (Cross Piercing Elongation), Plug Mill and MPI (Mandrel Pipe Mill) suitable for different sizes and grades.

Expansion plansFor captive consumption, MSL plans to set-up its own steel billets mill which is the raw-material for Seamless pipes. n

Major milestones yMSL is the first and only manufacturer in India of Seamless pipes up to 20’’ OD

yMSL is the first manufacturer in India of ERW pipes up to 20’’ OD

y MSL has the only Seamless plant in India with a coating mill of 1’’ – 48’’ OD

y MSL has set up a 7 MW wind power project in Satara, Maharashtra.

PROFILEPipes & Fittings


Tijaria pipes making mark in diverse applications

Established in 1982, Tijaria has emerged as one of the market leaders in manufacturing of high-grade HDPE, MDPE, LDPE, LLDPE, uPVC and PPR pipes, under the brand name of Tijaria and Vikas. The company produces a product range in the field of plastics, HDPE sprinkler, drip irrigation, micro irrigation, telecommunications etc.

Tijaria is an ISO: 9001-2000 certified organisation and licensed by Bureau of Indian Standard to mark ISI and ISO Certifications on different range of products having different license numbers.

Manufactured in state-of-the-art plant at Jaipur in India, with the latest manufacturing technology and under strict quality control, Tijaria products have made their mark in various applications, be it water supply, gas and petrol transport, sewage disposal or cable ducting.

Product rangeTIJARIA DWC pipes HDPE double wall corrugated pipes are made of high density polyethylene polymers. The DWC pipes consist of two

layers, the outer layer is corrugated and the inner layer is plain and smooth.

TIJARIA DWC pipes are available in sizes 50 mm to 200 mm. The pipes have two types of applications. Each application has its own use:

Telecom applications• Used as the main duct in sub duct

network design.• Protection of ducts and optical fibre

cables in city networks.• Protectionofducts/cablesinrailand

rail crossings.• Protection of ducts / cables across

rivers disused canals etc.• Usedascasingofcoppercables.

Electrical applicationsIn the electrical networks, protective casing of street lighting cables-pole to pole application. DWC Pipe helps in easy laying of cable upon completion of civil works, easy maintenance of cables as free to move inside the duct and easy to replace the cables.

In city distribution network protective casing application of power cables can be possible only after using DWC pipes. It is excellent and cost-effective alternative of GI, RCC and PVC pipes. It can be openly used for protective casing of street light cable as well as telecom cable.

FeaturesThe pipes consist of various features and properties. It offers exceptional resistance to chemical, resistance to all internal and external corrosion. The pipe will not rust or rot easily and is easy to install. It is anti rodent too.

In comparison to GI, MS and RCC, these pipes have longer life. When it comes to flexibility, it can be bent to a radius as low as 10 x OD of the duct. Due to low thermal conductivity, it has good thermal insulation. The product is light weight for easy transportation, handling and fitting. It has the capacity of laying of additional ducts due to aligned joints,

continuous length and smooth bends. Last but not the least; the product has excellent mechanical properties and ability to take heavy loads.

MDPE pipesCharacteristics such as corrosion and crack resistant, tough and flexible makes polyethylene piping systems make MDPE pipes a preferred means for transportation and distribution of water, petrol and natural gases worldwide.

MaterialThe raw material used is medium density poly ethylene (MDPE). Tijaria manufactures pipes in grades PE-80 and PE-100 for gas applications in sizes 20 mm to 250 mm (outer diameter) in all pressure ratings. Traditionally these pipes are identified by its colour for different uses like blue for water, orange for petrol, and yellow for gas lines.

SpecificationsThe company manufactures MDPE pipes confirms to national and international standards as ISO-4437, ISO-4427, IS-14885, BS-7281, DIN-8074/75. The company can also offertailor-made solutions to meet the specific requirement of individual gas authorities or customers.

Features

• Flexible-easytoHandle• Corrosion resistant - tough and

reliable in aggressive soils• Fusion joints - high integrity and

reliability

Tijaria produces a product range in the field of plastics, HDPE sprinkler, drip irrigation, micro irrigation, telecommunications etc.

120 g

PROFILEPipes & Fittings

118 f

• Light weight - lighter in weight ascomparedtometalpipes

• Crack resistant - resistant tosubsidence, traffic vibrations pointleadingandmarshyground

• Homogenous-leakagefreejoints• Installation-lowinstallationcost.

MICRO / DRIP Irrigation SystemMICRO / DRIP Irrigation System TijariaPolypipesLtd.introducesinlineemittingpipe system for better irrigation of

plantsatvery lowcostandwithscarceofwater.ThisproductconfirmstoIndianStandards as per IS:13488 & IS:12786.Thisisanintegralpipesystem(in-built)inwhichtheemittersareinsertedinthelateralsduringtheextrusionprocessatpresetdistances.

Features• High clog resistant emitter designedwith a unique wide turbulentflowpath.

• Largesurfaceinletscreenorifice.• Two orifice outlets placed 180degapartateachdripperend.

• Additional outlet reduces thesuction hazard from sand particleswhenthelateralsaredrained.

• Easy to roll and unroll duringinter cultivating operations, thusreduces chances of mechanicaldamagewithoutlosingdrippers.

• Uniform emission rate along thelateral.

• Available in wide range of emitterspacing from 20 to 150 cm as percustomer’sneed.

Installation• Quick and easy to install: Just unrolland lay the lateral to the reducetimeandcost.

• Noneedofpunchingthedrippersonthelateral.

• Can easily be connected to the

PVC / HDPE pipe by means of headconnector.

SpecificationsManufactured in class 1, 2, 3, 4pressure ratings with differentemissionrates.

Operating rangeWorking pressure range: 0.7 kg/cm² to2.25kg/cm²

ApplicationAll field crops like sugarcane,cotton, strawberry, grapes, carnations,floriculture, banana, pineapple,vegetables, tea gardens, greenhousesetc.

Contact:Tijaria Polypipes Ltd.A-130E,RoadNo.9DVKIAAreaJaipur-302013,RajasthanTele:+91-141-2333722,2333723,4010800E-mail:[email protected]


PROFILEPumps & Valves

Kirloskar installs water pumping system for Mundra UMPPGlobal fluid management company Kirloskar Brothers Ltd. (KBL) has collaborated with Tata Power and installed the world’s largest circulating water pumping system for Tata Power’s Mundra UMPP (Ultra Modern Power Plant).

A mammoth 10.5 million litres of water is circulated with the help of KBL’s 10 concrete volute pump sets every minute. The Coastal Gujarat Power Ltd. (CGPL), Tata Power’s wholly-owned subsidiary, which has implemented the 4,000 MW (800 MW x 5 units) UMPP requires massive amounts of water to condense the heat generated in the production of power.

Ravindra Ulangwar, Associate Vice President and Head - Power Sector, KBL said, “The layout of the pumping system is designed in such a way that large fluctuations in the sea water level due to tidal variation are taken care of. The motors are installed above the high tide level whereas pumps are installed in such a

way that enough submergence is available during low tide levels. To accommodate this, motors are connected to the pump shaft with a specially designed cardon shaft. The length of the cardon shaft with universal coupling is 12 metres, making it one of the longest pump shafts. The entire pumping system is so large that it has become the largest circulating water system in the world.”

In order to ensure the perfect flow pattern for smooth operation of the pumps, KBL also conducted a CFD (Computational Fluid Dynamics)

analysis, followed by a physical model study for the fore-bay and sump at the Hydraulic Research Centre at Kirloskarvadi. A prototype physical model was built to 1:12 scale ratio. KBL also conducted a pump model study to establish the hydraulic performance of the concrete volute pumps.

The Mundra UMPP is India’s first and most energy efficient coal-based thermal power plant using supercritical technology to create lower greenhouse gas emissions and its main power generation equipment is sourced from Japan and Korea. n

10.5 million litres of water is circulated with the help of KBL’s 10 concrete volute pump sets every minute

Coastal Gujarat Power India’s First Ultra Mega Power Project

KBL’s world’s largest water pumping system for Tata Power’s Mundra UMPP

SFMC PPR pipes for mining applicationPPR pipe’s unique characteristics have made it the product of choice for numerous in the mining industry. It is a proven product in rugged terrains, extreme climates, and changing site environment. Heat-fused joints create a monolithic structure that allows long lengths of PPR to be pulled from one area to another. PPR pipe’s flexibility, abrasion resistance and leak-free joints have helped the product it long-term in demanding environments.

PPR pipes can be used for following mining applications• Solutionminingwater,transportationpitdewatering,• Heapleachingtailingstransportationdepressurisation• Processwaterdustsuppression• Processslurryminedewatering.

Advantages of PPR for mining applications• Chemicalandabrasionresistance• Lowcost• Easeofinstallation• Pressuresurgeresistant

Chemicalandabrasionresistance:PPRisresistantinthevariety of mineral process, ranging from low ph acids to high ph caustic solutions. It has good chemical resistance and is the material of choice in harsh chemical environments. PPR is also abrasion resistant and is well suited for the solids environment in mining application.

Pressuresurgeresistant:PPRforminingapplicationsissemi-rigid to withstand high external loads as well as high internal pressure surges. Its flexible nature expands with pressure surges that increase the life of the pipeline and reduces maintenance costs.

Lowcost:PPR installationsarecosteffectiveandhavelong term cost advantages due to its physical properties, leak-free joints and reduced maintenance costs. The PPR industry estimates the service life for PPR to conservatively be 50-100 years. This generates savings in replacement costs for generation to come.

Easeof installation:The combinationof flexibility andleakfreejointsallowforuniqueandcosteffectivetypesofinstallationsmethods that the rigid PVC andDuctile Ironpipes can’t use with bell and spigot connections, PPR is produced in straight lengths up to 4 metres long and coiled in diameters up through 3-inch. n

Contact:Savior-Faire Manufacturing Co. Pvt. Ltd.C-2161/T6,LalRatanBuildingBasement,WestPatelNagar,NearSatyamCinema,NewDelhi-110008Tele:+91-11-30159600,27017993,27013092E-mail:[email protected]

Suraj Limited, an ISO-9001, 14001, BS OHSAS 18001 certified company, is a manufacturer and exporter of stainless steel seamless & welded pipes, tubes & ‘U’ tubes and large diameter welded pipes in various sizes, grades and specifications. Suraj has strong presence in global market and serving more than 70 countries such as EU, Gulf, South East, US and Latin America.

Materials: All austenitic, ferritic, duplex and super duplex stainless steel Specification: As per ASTM, ASME, DIN, NFA, and JIS StandardSize range: Welded: 6.0 mm OD – 1016 mm ODSeamless: 6.0 mm OD – 323.9 mm ODThickness: Welded: 0.6 mm – 25 mmSeamless: 0.8 mm – 25 mm Pipe length: Up to 12 metre longTube length: Up to 30 metre long Specialisation: Heat exchangers, heating elements, surface condensers, evaporators digestors, instrumentation tubing and fluid pipingApplication: Refinery, petrochemical, food, pharmaceuticals, fertiliser, oil & gas, breweries, sugar, shipbuilding.

Suraj also holds certificates for quality in accordance with AD2000 MERKBLATT W0 and pressure equipment directives [PED] 97/23/EC from TUV Nord and offer material under all national and international third party inspection. The company also has its own lab to examine various tests such as hydro test, eddy current, PMI, IGC, UT, RT, spectro analysis, mechanical properties and many others as per customer requirements. n

Contact:Suraj LimitedSuraj House, Opp. Usmanpura Garden, Ashram Road, Ahmedabad – 380 014, GujaratTel: +91-79-2754 0720/21 [email protected], www.surajgroup.com

Suraj produces stainless steel seamless & welded pipes, tubes, ‘U’ tubes and large diameter welded pipes

Media Partners:

Platinum Partner Diamond PartnerTitanium Partner Organizer: Contact:

[email protected]

Strategic Partners:

International Fenestration Forum

Supporting Associations:

Save the date!Feb 27 - 1 Mar 2014Pragati Maidan, New Delhi, India

Visit fensterbau/frontale india to witness the best of Façade and Fenestration Technology.

Lifestyle : Redefined byEnergy E�cient Windows & Doors

Advertorial

Following the laws of gravity and pressure, plumbing forms the base of one’s dream shelter. Bringing freshwater in and taking wastewater out, the system contributes to the quality of our lives. An effective plumbing system adds a lasting value to any building and aids in water and energy conservation. With rapid urbanisation and changing lifestyles, the construction sector is on a rise, and so is the demand for Chlorinated Polyvinyl Chloride (CPVC) piping systems.

The Lubrizol Corporation signifies change in the Indian plumbing market since past 80 years. Giving it a facelift with products offering corrosion resistant properties, enhanced water quality, easy installation, superior hydraulics and affordability, Lubrizol is a one-stop plumbing solutions provider for hot and cold water application.

Lubrizol is the world leader in CPVC resins and compound technology. The heat-resistance and low-combustible CPVC specialty plastic has applications in fire sprinklers, plumbing systems and industrial piping. Its motto is to provide solutions that will make structures sustainable.

Characterising the market needs, Lubrizol’s unique offerings – FlowGuard™ and Corzan® piping systems – are ideal for the residential and industrial segments, respectively. With its ease of installation, cost effectiveness and noiseless properties, FlowGuard™ has turned out to be a plumbers’ best friend. Corzan® plumbing system has become an elixir for industries, such as refineries, steel, paper and pulp, power, desalination, and wastewater management.

Safety is a priority for Lubrizol. To facilitate it, the company has created the BlazeMaster® fire sprinkler systems. It is lightweight, durable, and flame-resistant CPVC pipe and fitting system, engineered to protect your abodes from fire.

As an innovative specialty chemical company, Lubrizol actively deals in additives and advanced materials catering to transportation, industrial and consumer markets globally. n

Contact:Lubrizol Advanced Materials India Pvt. Ltd.6th & 7th Floor, Jaswanti LandmarkLBS Marg, Vikhroli (W), Mumbai - 400079Tele: +91-22-66027800www.lubrizol.com

Lubrizol is a one-stop plumbing solutions provider for hot and cold water application

Lubrizol: committed for technological advancements in plumbing

Subscribe to India’s best monthly magazine for Project Procurement

Please Tick 1 Year (` 960) 2 Years (` 1680) 3 Years (` 2160) 1 Year (USD 60) 2 Years (USD 100) 3 Years (USD 150)

15/2, Second Floor, Chandroday Society, Swastik Park, CST Road, Chembur, Mumbai - 400071, INDIA. Tel: +91-22-32682214/15 • Fax: +91-22-25263223 • Email: [email protected] Website: www.b2bpurchase.com

Name:

Designation:

Company:

Type of Activity:

Address:

City: State: Pin Code:

STD Code: Phone: Mob.:

Email: Website:

Payment Details: Cheque/DD No: Dated:

Drawn on: For Rupees:

in favour of I-Tech Media Pvt. Ltd.

(Pls. add ` 25/- for non-Mumbai Cheques)

For outside India, Subscription charges in USD

Subscription Amount

` 3600/-(USD 150)

` 2400/-(USD 100)

` 1200/-(USD 60)

` 720/-+ Free postage & Handling

Free postage & Handling

(USD 100)

(USD 60)

3 Years (36 issues)

2 Years (24 issue)

1 Year (12 issues)

` 1,680` 960` 240/-

You Save

` 1440/-+ Free postage & Handling

You need to Pay

(USD 150) ` 2,160

Subscription Period

I-TECH MEDIA

INDUSTRY UPDATE Water

Jain Irrigation signs MoU with TERIJain Irrigation Systems Ltd. (JISL) and TERI signed a MoU for establishing a resource centre for water use efficiency. The MoU was signed by Dr. R.K. Pachauri, Director General of TERI and Anil Jain, Managing Director of Jain Irrigation Systems Ltd.

The resource centre would take an inclusive approach by engaging all the concerned stakeholders, including government bodies, NGOs, farmers, other research institutes, etc.

The centre proposes to carry out the following activities:• Research activities with a focus on the

broad theme of Water Use efficiency in Agriculture which is proposed to encompass sub-themes as listed below:• Benchmarking and evolving

performance standards for Water

Use in Agriculture• Innovative and efficient Water-use

technologies• Best agricultural practices• Water Conservation and Watershed

management.• Design and undertake research-based

pilot projects that can demonstrate the practical application and feasibility of the project interventions in improving the w a t e r - u s e efficiency in agriculture.

• Train and build capacity of all relevant

Stakeholders on best practices in agricultural Water Use efficiency using the in-house expertise of TERI and JISL.

• Create Awareness and design Sensitization programs on efficient water-use practices in agriculture and disseminate research findings through national and regional seminars, interactive mass-media, etc. on topics relevant to the overall theme of Water Use efficiency.

• Policy recommendation and advocacy with the national and state governments.

• Document, report and publish its work on a regular basis.

The centre is proposed to be set-up at two locations in India, one at TERI in Delhi and the other one at JISL’s corporate office of JISL in Jalgaon. n

Cost Index


Mumbai Delhi Chennai Pune Bangalore Hyderabad KolkataACC Ltd Grade 43 335 - - - 325 225 365Grade 53 335 - - - - 230 -PPC 335 290 - - - - 360Ambuja Grade 43 - - - - - - - Grade 53 - - - - - 230 - PPC 335 295 - - - - -Birla White 850 720 880 - - 900 830Orient Grade 43 - - - - - 215 - Grade 53 - - - - - 220 -PPC 300 - - - - - -

Mumbai: Neelkanth Ceramics (022-67384751), Bangalore: Vikas Enterprises (9980166585), Delhi: BCC Cements Pvt. Ltd. (011-6538808), Hyderabad: Patel & Co (9246292405), Kolkata: Chowdhury Cement and Traders (033-66347037)

CEMENT (Unit - 50 kgs; Price in `)

Mumbai Delhi Chennai Pune Bangalore Hyderabad Kolkata 1.5 sq mm - 8.15 - - - 11.61 -2.5 sq mm - 13.4 - - - 18.7 -4 sq mm - 20.12 - - - 27.5 -

Mumbai: Shiv Electric Store (022-61615113), Chennai: GB Electricals (044-66325141), Pune: Regal Electricals (9970001010), Bangalore: Logic Electricals (080-41223350), Hyderabad: RKS Electricals (040-66046190)

ELECTRICAL WIRES (Unit - 1 m; Price in `)

STONE & TILES (Unit - 1 sq ft; Price in `) Mumbai Delhi Chennai Pune Bangalore Hyderabad Kolkata Granite 120 200 65 - - 95 65Kota 32 25 45 - - 35 40Marble 55 60 45 - - 45 42

Mumbai: Stone Touch (8097000400), Delhi: Shri Mahashakti Marble (011-66724192) Chennai: Temple Stone (044-66425103), Hyderabad: Baba Stones and Tiles (9030656785), Kolkata: R.D Enterprises (033-66343789)

Cost Index


PAINTS ENAmEl (Unit - 4 litres; Price in ̀ )

mumbai Delhi Chennai Pune Bangalore Hyderabad KolkataAsian Paints 1650 - 995 995 270 995 -Berger Paints - - 975 980 260 - 975Dulux - - - 950 290 - 970Kansai Nerolac 390 - - 990 - - -

mumbai: Lalitkumar.F.Jain (022-49180975), Delhi: M.G.Paints Hardware & Sanitary (011-66722885), Chennai: Indo Burma Hardwares (044-66420396), Pune: Colourmen (9766566002), Bangalore: Sri Guru Krupa Traders (080-23213846), National Paint Mart (080-25580680), Hyderabad: Shankar hardware (040-23060726), Kolkata: Pasari Paints (033 - 66346004), Kwality Traders (033- 66037717)

mumbai Delhi Chennai Pune Bangalore Hyderabad KolkataCommercial 4mm 35 10 14 18 15 11 126mm 48 16 30 28 28 30 2412mm 65 27 47 47 38 46 3418mm 95 38 67 67 48 68 45Waterproof 4mm 45 14 20 25 27 30 246mm 58 21 40 32 37 42 4212mm 75 36 70 52 47 59 6518mm 105 46 90 80 77 88 95mumbai: Burhani Plywood (022-61630135), Delhi: Shree Bankey Behari Timber & Plywood (9810395949), Bangalore: Duratec Plywoods (984503690), Hyderabad: Sri Shyam Plywood Agencies (040 66384128), Kolkata: August Ply (9830829060)

PlYWOOD (Unit - 1 sq ft; Price in `)

mumbai Delhi Chennai Pune Bangalore Hyderabad Kolkata 6mm 13 16.5 - 20 21 18 209mm 18 22 - 28 27 22 3512mm 33 32 - 38 31 34 4518mm 45 44 - 60 48 48 65mumbai: Shree Ganesh Ply & Laminates (022 - 67384569), Delhi: Haryali Timber Trading Co. (011 - 66435170), Pune: Designer Elements (020-66829435), Bangalore: Arun Glass & Plywoods (080-66493905), Hyderabad: Sri Shyam Plywood Agencies (040-66384128/29), Kolkata: K G Patel & Co. (033- 22217090)

mDF (Unit - 1 sq ft; Price in `)

mumbai Delhi Chennai Pune Bangalore Hyderabad Kolkata4mm 40 30 34 34 33 32 335mm 50 40 42 42 42 45 426mm 60 48 60 52 52 54 52mumbai: Pyramid Glass India (9833515522), Delhi: Bawa Glass (011-23670431), Chennai: Glass World (044-24335677), Pune: Mahavir Designer Glass (020-66829989), Bangalore: Murthy Glass & Plywoods (080-66508121), Hyderabad: Vision Glass Kraft & Art Studio (9849254654), Kolkata: Glassic (9433736907)

ClEAR GlASS (Unit - 1sq ft; Price in `)

mumbai Delhi Chennai Pune Bangalore Hyderabad Kolkata Pine Wood 800 400 550 750 650 - 900 Sal Wood 1000 1400 1400 850 1200 1150 1700 Teak Wood 1550 2400 1650 1250 3500 1900 2400 mumbai: Classic Ply N Wood Pvt Ltd. (022-67307452), Chennai: Ambika Wood Industries (9965566352), Pune: NVS Plywood Store (020-66239351), Bangalore: Laxmi Narayan Timber (7795126430), Hyderabad: Sri Pandu Rangaswamy Timber And Plywood 9830829060 Delhi: Himachal Wood Works Madaan Trading Company (9811563310)

WOOD (Unit - 1 cu ft; Price in `)


Follow us:

www.dmixspeedcrafts.comwww.speedcrafts.com

SELF LOADING CONCRETE MIXER

VISIT US ATLas Vegas, USA from 4th to 8th March 2014STAND NO. 9203, Platinum Lot (Open Area)

SPONSORS


FEBRUARY 2014Achieve Hydraulics & Pneumatics ...................................................................................................... 37ACME Air Equipments Co. Pvt Ltd...................................................................................................... 41Airier Natura Pvt Ltd ............................................................................................................................. 93Ajax Fiori Engineering (I) Pvt Ltd ........................................................................................................ 15Anjani Technoplast Ltd ...................................................................................................................... 142Apex Tubes Pvt Ltd ............................................................................................................................ 121Avigiri Urthene & Rubber Industries Pvt Ltd ..................................................................................... 87BASF India Ltd .................................................................................................................................... 103Beardsell Ltd ......................................................................................................................................... 69Bolts & Nuts Company ......................................................................................................................... 59Caltech Engineering Services ........................................................................................................... 101Case New Holland Construction Equipment (I) P. Ltd....................................................................... 25Chembond Chemicals Limited .............................................................................................................. 4Chemtreat Well ................................................................................................................................... 111Concrete Additives & Chemicals Pvt Ltd ......................................................................................... 109Cradle Runways (India) Pvt Ltd ............................................................................................................. 7DCS Techno Services Pvt Ltd ............................................................................................................. 29Deep Group ........................................................................................................................................... 75Engineering Design Software & Services Pvt Ltd ............................................................................. 79Flyocrete Green Concrete LLP ............................................................................................................ 35Golden Engineering Company Pvt Ltd ............................................................................................... 65Gourav Industries Building Systems Pvt Ltd .................................................................................... 83Graebert India Software Pvt Ltd .......................................................................................................... 91Greaves Cotton Ltd .............................................................................................................................. 23Gulf Oil Corporation Ltd ...................................................................................................................... 11H & K Rolling Mill Engineers Pvt Ltd .................................................................................................... 5H D Gajra Bros ...................................................................................................................................... 81Hindalco Industries Ltd. .....................................................................................................................BCIndian Steel Corporation Ltd. .............................................................................................................. 63Indus Group .......................................................................................................................................... 39Jayashree Electron Pvt Ltd ............................................................................................................... 123JB Engineering & Industrial Co. .......................................................................................................... 55JNK Lifters Pvt Ltd ............................................................................................................................... 55Kamal Sales Corporation Pvt Ltd ........................................................................................................ 43L C P Building Products Pvt Ltd ......................................................................................................... 95Landmark Crafts (P) Ltd. ...................................................................................................................... 97LiuGong India Pvt Ltd .......................................................................................................................... 49Maco Corporation (India) Pvt Ltd ........................................................................................................ 45Maharashtra Seamless Ltd ................................................................................................................ 117Mtandt Group ........................................................................................................................................ 27National Steel & Agro Industries Ltd. ................................................................................................. 71Next Steel Building Solution ............................................................................................................... 67Nine Bearing ......................................................................................................................................... 89Olikara Lighting Towers Pvt Ltd .......................................................................................................... 17Om Sai Engineering ............................................................................................................................. 57Oshkosh India Pvt Ltd .......................................................................................................................... 13Pneucon Valves Pvt Ltd ..................................................................................................................... 127Prince Pipes & Fittings Pvt. Ltd. ....................................................................................................... 115Raja Brick & Tile Industries ................................................................................................................. 40Ralson International Pvt Ltd ................................................................................................................ 77Real Green Engineers Pvt Ltd ........................................................................................................... 101sana Industries ................................................................................................................................... 141Satec Environment Engg. (I) Pvt Ltd. ................................................................................................. 61Schwing Stetter(India) Pvt Ltd ............................................................................................................ 51Shriram Equipment Finance Co. Ltd .................................................................................................. 19Sleek Boards India Ltd ......................................................................................................................... 84State Enterprises .................................................................................................................................. 99Suraj Limited ....................................................................................................................................... 125

Bharat Road Development Combines Pvt Ltd ....................................................................................... 139Century Cranes Engineers Pvt Ltd ......................................................................................................... 132Dolphin Enterprises ................................................................................................................................. 130Esquire Machines Pvt Ltd ........................................................................................................................ 134Lab care Furniture .................................................................................................................................... 130Macmillan Insulations India ..................................................................................................................... 135National Roofing Services ....................................................................................................................... 137Nav Bharat Group ..................................................................................................................................... 138Nicomac Doors (P) Ltd ............................................................................................................................. 137Powertrac Group ...................................................................................................................................... 138Sai-Ansh Engineers Pvt Ltd .................................................................................................................... 136Shri Engineering Enterprises .................................................................................................................. 136Speedcrafts Ltd ........................................................................................................................................ 133Supreme Fibre Glass Pvt Ltd .................................................................................................................. 137Susumo Engineering ................................................................................................................................ 138Sygma Enginery ....................................................................................................................................... 140

Surie Polex ................................................................................................................................................ 107Tata BlueScope Steel Ltd. ........................................................................................................................ IBCTata BlueScope Steel Ltd.1 .......................................................................................................................... 3The Supreme Industries Ltd .................................................................................................................... 119TIDC India .................................................................................................................................................... 47Tinny Craft ................................................................................................................................................... 93U. P. Twiga Fiberglass Ltd........................................................................................................................ IFCUltraspan Technologies Inc ....................................................................................................................... 53Unisoft Pheripherials ................................................................................................................................. 73UNP Polyvalves India Pvt Ltd .................................................................................................................. 113Vashi Electricals Pvt Ltd .............................................................................................................................. 9Walplast Products Pvt Ltd ....................................................................................................................... 105Water 2 People Teknologies .................................................................................................................... 129Wirtgen India Pvt Ltd .................................................................................................................................. 33WMI Konecranes India Ltd ......................................................................................................................... 31

Address 9, Rizvi Mansion, LJ Road, Mahim (W), Mumbai- 16Mob: +91 9321512330, +91 7666517499

E-mail: [email protected], Web: www.sygmaenginery.webs.com

Regd. No. MH/MR/North East/217/2013-15 • Posted at Tilak Nagar P.O. Mumbai - 400 089 on 13th / 14th of every month • English • Monthly • Date of Publication: 1st of Every Month.

144

b2b purchase february 2014

Documents

com6 b2b purchase

comitech media pvt

new dealer

high productivity

new range

jcb machines

truewill monorail

mumbai issn