axminster 02 - industrial machines_p85-p108

8/3/2019 Axminster 02 - Industrial Machines_p85-p108

1/24 8Order online www.axminster.co.uk/industrial

Industrial Panel Saws

Axminster Industrial SeriesP30/2200 Panel SawsNot every trade workshop needs a large panel saw dominating

the workspace, but a compact, fully featured saw is a tempting

alternative. The Axminster Industrial Series P30/2200 does just

that, having a robustly constructed chassis in heavy gauge steel

and generous grey cast iron table. This is a sturdy chassis that

gives stability and vibration free running. The 305mm main blade

gives a maximum depth of cut of 90mm. The saw blade is carried

on a heavy duty spindle ensuring accurate blade control and is

driven by a multi V t ype belt which ensures quiet operation with

high reliability. A 120mm scoring blade is standard, easily

adjusted or withdrawn below the table by simple hand controls.

There are two options available; 230V 1ph or 415V 3ph, both are2.2kW. These high efficiency motors will give more than ample

power for the toughest of tasks, they are cool running and have a

brake for safe stopping. A 2,200mm sliding table is a standard

fitting, very smooth running, carries a sizeable crosscut table and

includes a telescopic mitre fence complete with length stops. The

crosscut table is easily removed if required, saving space when

not needed. Rear outfeed and right hand support tables are

included, giving a sizeable working area for sheet work. The cast

iron handwheel controls are smooth to operate and have

retracting handles to save them being knocked. Efficient dust

control is via a direct dust chute and ensures clean operating

when connected to a suitable extraction system. This saw has all

you could require in a small but busy workshop, or in a school

preparation area. The main saw blade is not supplied, please make

your selection from the blades listed or from our Blades Section.

(N.B. The Overhead Crown Guard Kit is to be recommended for

increased safety and more efficient dust collection).

Available as 2.2kW 230V 1ph or 415V 3ph

Powerful, heavyweight but compact dimensions

Extra large rigid cast i ron table

2,200 x 360mm fully featured sliding table

Crosscut frame fully supported by a heavy duty telescopic arm

Rear outfeed and right hand support tables

Rigid, cast iron rip fence bracket

Uses 305mm saw blades, wide range available

120mm scoring blade, fully adjustable for depth and position

Model Axminster Ind P30/2200

Rating Industrial

Power 2.2kW (230V 1ph or 415V 3ph)Blade Dia/Bore 305mm/30mm

Blade Tilt 0-45Max Depth of Cut @ 45 64mm

Max Depth of Cut @ 90 90mm

Table Size 896 x 548mm

Table Height 915mm

Sliding Table Size 2,200 x 360mm

Dust Extraction Outlet 120mm & 60mm

Overall L x W x H 2,326 x1,350 x 1,100mmWeight 480kg

P30/2200 230V 1ph 3,559.50 2,966.25 953440

P30/2200 415V 3ph 3,459.50 2,882.92 953441

Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 951525

Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 951526

Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 951527

Inc.vat Ex.va t Co de

Overhead Crown Guard KitThis Overhead Crown Guard is an accessory to fit the Axminste

P30/2200 model. It offers much improved protection for the u

as well as much superior dust collection and ease of use of the

saw. The HSE recommend the use of guards of this design due

the greater safety for the user, it is simple to fit and is a great

enhancement.

Overhead Crown Guard kit 474.50 395.42 211

Inc.vat Ex. vat C


2/24

This is a great range of mid sized panel saws designed for ease of use and the high accuracy cutting of board materials of all types. With a

choice of 2,500mm or 3,200mm x 360mm sliding tables which are robust and smooth running, these giving a 2,400mm or 3,100mm

capacity before the blade.

A crosscut frame supports the larger boards and a mitre fence with a telescopic extension and two flip-over length stops is fitted.

Unusually, offering a choice of main blade size between 305-355mm giving a maximum depth of cut at 115mm at 90. A 120mm scoring

blade powered by a separate motor is standard, giving the finest of cuts on faced materials. The main table is a rigid, precision ground,

cast iron surface of 548 x 896mm supported by a welded steel chassis, powder coated for long term protection.

A cast iron rip fence body with fine width adjustment is complemented by a long, alloy extrusion fence arm, all running

on a solid 40mm chromed steel rail. Rear out feed and side extension tables are standard, along with a work clamp,

handle and edge shoe for the sliding table. We do recommend the use of the optional Overhead Crown Guard when

using the larger 355mm blades. Please choose your main saw blade from the selection below. A fine range of modern

saws, a pleasure to use in any workshop.

Overhead Crown Guard Kit

This Overhead Crown Guard is an accessory to fit the Axminster

SS-1600MH, P305/2500 and P305/3200 models. It offers much

improved protection for the user as well as superior dust

collection. The HSE recommend the use of guards of this design

due to the greater safety for the user and we would recommend

the use of these guards when using blades greater than 305mm

in diameter.

Improved user protection

Superior dust collection

Better visibility during cutting

Overhead Crown Guard kit 474.50 395.42 21156

Inc.vat Ex. va t Co d

86 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95


Axminster Industrial Series P305/2500 & P305/3200 Panel Saw

Precision ground cast iron main table

2,500 x 360mm or 3,200 x 360mm sliding tables with large panel support table

Takes 305-355 main saw blades

Separately powered 120mm scoring blade

Outfeed and side extension tables standard

Cast iron rip fence with fine adjustment

P305/2500 230V 1ph 4,369.50 3,641.25 953442

P305/2500 415V 3ph 4,249.50 3,541.25 211564

P305/3200 230V 1ph 4,759.50 3,966.25 953443

P305/3200 415V 3ph 4,629.50 3,857.92 211566

Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 951525

Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 951526

Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 951527

Saw Blade 355 x 3.5 x 30mm 54T 105.50 87.92 951529

Saw Blade 355 x 3.5 x 30mm 72T 135.50 112.92 951530

Saw Blade 355 x 3.5 x 30mm 108T 139.00 115.83 951531

Model P305/3200

Rating Industrial

Power 3.75kW (230V 1ph, 415V 3ph)

Blade Dia/Bore 305-355mm, 30mm

Blade Tilt 0-45 degrees

Max Depth of Cut @ 45 62mm (70mm max)

Max Depth of Cut @ 90 90mm (115mm max)

Max Width of Cut with Fence 1,300mm

Max Ripping Width 1,300mmTable Size 548 x 896mm

Table Height 915mm

Sliding Table Size 3200 x 360mm


Weight 600kg

Model P305/2500

Rating Industrial

Power 3.75kW (230V 1ph, 415V 3ph)


Blade Tilt 0-45 degrees

Max Depth of Cut @ 45 62mm (70mm max)Max Depth of Cut @ 90 90mm (115mm max)

Max Width of Cut with Fence 1,300mm

Max Ripping Width 1,300mm


Table Height 915mm



Weight 573kg

Inc.vat Ex. va t C ode




Axminster Industrial Series D405A/3200 Panel SawThis is a new design of large panel saw featuring a 3,200mm long sliding table of 395mm width with a four track bearing

system for extra stability and smooth running. This sliding table is e asily and completely adjustable to make sure it runs true to

the blade, so complete accuracy is guaranteed. Able to crosscut up to 3,100mm and rip cut up to 1,300mm against the fence this saw

has prodigious capacities for all your board work. Powered by a 5.5kW 415V motor for the main blade and a separate 0.75kW motor for

the scoring blade this machine is very well powered as standard.

The blade rise and fall is motorised, as is the blade tilt. A digital read-out enables accurate blade height and tilt setting every time. A very

generously sized cast iron main table with its outfeed and side support tables gives a large working area, unimpeded by the overhead

saw blade guard system. The exceptionally rigid cast iron rip fence holder features a micro adjustment system and a rigid alloy extrusion

rail, all mounted on a solid chromed bar and held by cam locks. An optional fence fitted with a Digital Read-Out (DRO) can be fitted for

improved accuracy of setting between the rip fence and blade.

Powered blade height and tilt with digital read-out

Precision ground main table

Smooth running 3,200 x 395mm sliding table

Takes 355-400mm main saw blades (not supplied)

Separately powered 120mm scoring blade

Large panel support frame

Outfeed and side extension tables standard

Cast iron rip fence with fine adjustment

Work clamp, edge shoe and mitre gauge standard

Model D405ARating Industrial

Power 5.5kW (415V 3ph)


Blade Tilt 0-45

Max Depth of Cut @ 45 70 - 84mm max

Max Depth of Cut @ 90 105-127mm maxTable Size 548 x 896mm

Table Height 915mm

Sliding Table Size 3,200 x 395mm


Weight 859kg

D405A 415V 3ph 7,259.50 6,049.58 953444

Saw Blade 355 x 3.5 x 30mm 54T 105.50 87.92 951529

Saw Blade 355 x 3.5 x 30mm 72T 135.50 112.92 951530

Saw Blade 355 x 3.5 x 30mm 108T 139.00 115.83 951531

Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 951532

Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 951533

Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 951534

Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50 951535

Inc.vat Ex. vat C ode

Crosscut table

Work hold down clamp

Edge shoe

As you would expect, the chassis is of heavy welded steel construction and powder coated for long term

protection. A panel saw is the machine at the heart of any professional workshop and this saw would win its placein all but the largest workshop. Supplied complete with 3,200 x 395mm sliding table, scoring blade, overhead

crown guard, crosscut fence, mitre fence and work hold down clamp. Not supplied with a main blade, please

choose from our Axcaliber Premium Blades selection.


4/2488 Order freephone 0800 371822Free delivery on orders over 50 (UK mainland only) Orders UNDER 50 P&P 4.95

Industrial Vertical Panel Saws

Safety Speed Cut C4 Panel SawThe C4 vertical panel saw is a useful addition to any small or medium workshop where sheet material is regularly processed. Vertical

operation makes handling of the sheets much easier as well as saving valuable floor space. The saw can be secured permanently to a wa

or moved around with the aid of the optional wheels and either the fixed or the folding stand. It can also be transported in the back of a

van for site use. The saw unit with its 44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the

two guide bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position on the frame

and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw unit through 90, locking it in the

correct vertical position and moving the sheet through the blade. Rollers on the lower rail ease the passage of the sheet through the saw

and there are wheeled extensions available for the bottom rail to allow 2,440 x 1,220mm(8 x 4) sheets to be safely processed.

1,600W industrial duty motor Up to 44.5mm depth of cut

Counter-balanced saw carriage for ease of cutting

2,450 x 1,270mm(8 x 4)sheet cutting capacity

Optional wheels and fixed or folding stands available

Rollers on lower guide rails to ease horizontal cutting

Optional wide board extensions and thin material pressure rollers

C4 package supplied with midway fence for handling narrow

boards, dust extraction kit, fixed stand and wheel kit

Picture shows the mid-way

fence with support boards

fitted, these can be

removed very quickly if

required. Note the stop

and scale that allows for

quick and precise setting

to be made.

Model C4

Rating Industria

Power 1,600W

Blade Dia/Bore 205mm/5/8

Max Depth of Cut 44.5mm

Max Crosscut 1,270mm

Max Ripping Width 2,450mm

Overall L x W x H 1,525 x 915 x 1,900mm

Weight 67kg

C4 Panel Saw 240V 1,649.50 1,374.58 11006

C4 Saw Package 240V 1,859.50 1,549.58 34013

205 x 1.8 x 16mm 64T Wood 19.45 16.21 95068

205 x 2 x 16mm 64T Non Ferrous Metal 22.85 19.04 95068


Safety Speed Cut H4 & H5 Panel SawsThe H4 and H5 verti cal panel saws are a useful addition to any small or medium workshop where sheet material is

regularly processed. Vertical operation makes handling of the sheets much easier as well as saving valuable floor

space. The saw can be secured permanently to a wall or moved around with the aid of the optional wheels and

either the fixed or the folding stand. It can also be transported in the back of a van for s ite use. The saw unit with its

44.5mm depth of cut and 1,600W motor is fixed to a mounting plate which slides up and down the two guide

bars, supported by a spring recoil device. Vertical cuts are made by positioning the sheet in the correct position

on the frame and moving the saw blade down through the sheet; horizontal cuts are made by rotating the saw

unit through 90, locking it in the correct vertical position and moving the sheet through the blade. Rollers on

the lower rail ease the passage of the sheet through the saw and there are

wheeled extensions available for the bottom rail to allow 2,440 x 1,270mm

(8 x 4) sheets to be safely processed.

The saw comes fitted with a mid-way fence which makes the handling of

narrower width boards much more convenient. The two horizontal timber

supports on the mid-way fence are secured in place with quick release cam

clamps which allow the supports to be removed in a few seconds when full

depth sheets are to be cut. The mid-way fence is fitted with a precision stop

for accurate repeat length cutting.

Other accessories available are: (a) a sliding dust extraction kit with a

6.5 metre hose which slides over the rollers at the top of the machine as the

saw moves up and down, (b) a multiposition length stop which allows for up

to eight pre-set lengths to be set and (c) a hold down bar with support

fingers and non marring rollers for use when cutting thin materials such as

Perspex.

Please note that a fine toothed blade is now supplied as standard with

the saw. An additional blade suitable for cutting non-ferrous materials is

also available.

1,600W, 13A industrial duty motor

Zinc plated 44.5mm steel guide tubes

Four Nylatron roller bearing systems

Adjustable vertical and horizontal rulers

Thin material pressure guard as optional accessory

Spring loaded counter balance system

Injection-moulded plastic material rollers

Quick change from vertical to horizontal cutting

Model H4

Rating Industrial

Power 1,600W




Max Ripping Width Unlimited


Weight 111kg

H4 Ve rti ca l Pa nel S aw 2 40V 2 ,1 99. 50 1,832.92 500461


Model H5

Rating Industrial

Power 1,600W




Max Ripping Width Unlimited


Weight 135kg

H 5 Ver ti cal Pan el S aw 24 0V 2, 51 9. 50 2,099.58 500464


The saw comes fitted with a mid-way fence which makes the

handling of narrower width boards much more convenient. Thetwo horizontal timber supports on the mid-way fence are secured

in place with quick release cam clamps which allow the supports

to be removed in a few seconds when full depth sheets are to be

cut. The mid-way fence is fi tted with a precision stop for accurate

repeat length cutting.

Other accessories available are: (a) a sliding dust extraction kit

with a 6.5m hose which slides over the rollers at the top of the

machine as the saw moves up and down, (b) a multiposition

length stop which allows for up to eight pre-set lengths to be set

and (c) a hold down bar with support fingers and non marring

rollers for use when cutting thin materials such as Perspex.

A package consisting of the basic saw with the mid-way fence

together with the fixed stand, wheel set and sliding dust kit is

available at a small cost saving over the individual items. Please

note that a fine toothed blade is now supplied as standard with

the saw. An additional blade suitable for cutting non-ferrous

materials is also available.


5/24

Extension Set

for C4, H4 & H5 Panel SawsExtensions come as a pair and adds 20 to each side of the mate

handling roller fence allowing for easy processing of larger pane

They enable full sized panel saws to easily cut panels larger than

in length, quickly, accurately and safely, with just a single operato

Can be fitted to the C4, H4 and H5 panel saws.

Extension Set 142.00 118.33 500

Inc.vat E x. vat C

8Order online www.axminster.co.uk/industrial

Vertical Panel Saws Accessories

Folding Stand for C4 Panel SawThe Folding Stand allows the panel saw to free stand anywhere in

your workshop. It will fold back out of the way, allowing for easier

transporting or storage of the panel saw.

Folding Stand (C4 Only) 128.50 107.08 030011

Inc.vat E x.va t Co de

Quick Stops for C4,H4 & H5 Panel SawsThe quick stop aids with easily adjustable repeat cutting.

Using an 8 long heavy extrusion with an embedded scale and

an adjustable machined aluminum stop block.

Quick Stop for C4 172.96 144.13 341174

Quick Stop for H4 & H5 207.50 172.92 500466


Midway Fencesfor C4, H4 & H5 Panel SawsBrings your small panel work to waist height. Reduce back fatigue

while cutting quantities of small panels on your machine. Uses

removable fence supports on both the left and right of the

machine centre. Included is a stop block riding over recessed

gauges for setting stops for repeat cuts.

Midway Fence for C4 352.50 293.75 110069

Midway Fence for H4 & H5 403.50336.25 500467


Hold Down Barfor C4, H4 & H5 Panel SawsThe Hold Down Bar keeps thin and flexible materials firmly

against the panel saws frame for accurate, easy and safe cuttin

The Hold Down Bar features spring steel fingers with non-mar

rollers to reduce vibration and flex while cutting thin materials

Hold Down Bar for C4 & H4 157.00 130.83 500

Hold Down Bar for H5 166.00 138.33 500

Inc.vat E x. vat C

Fixed Stand forC4, H4 & H5 Panel Saws

Fixed Stand 95.95 79.96 110074

Inc.vat E x. vat C ode

The Fixed Stand allows the panel saw to free stand anywhere in

your workshop. The tripod design minimizes the effects of the

most uneven floor while holding your panel saw at the best angle

for stable material handling and cutting. Can be fitted to the C4,

H4 and H5 panel saws.

Allows you to efficiently remove most

airborne dust particles and maintain a

safer, cleaner working environment.

Requires the connection of a suitable

dust extractor. Kits contains, hose,

rollers, dust tube and elbow. Can be

fitted to the C4, H4 and H5 panel saws.

Dust kit 170.99 142.49 110070


Wheel Set for

C4, H4 & H5 Panel SawsAllows the panel saw to be moved easily when in the completelyupright position. When the panel saw is resting on the stand,

wheels are disengaged and the machine will not move. Can be

fitted to the C4, H4 and H5 panel saws.

Wheel Set 43.25 36.04 110072


Sliding Dust kit forC4, H4 & H5 Panel Saws



Industrial Rip Saws

Sliding table folds

away when not in use

Smooth & precise hand wheels with locking facility

Axminster Industrial Series TSCE-12R 305mm Table SawThis is a small industrial quality circular saw, primarily designed for rip work, compact in size but of very robust construction. Based

around an all welded steel base with a heavy, finely ground, all cast iron table and amply powered by a mechanically braked induction

motor. A small sliding table of cast iron running on an adjustable bearing system, complete with a simple mitre fence and a sliding

support arm is a standard fitting, ideal for small boards or panels. This easily folds down out of the way if not required, saving space in the

workshop. An extremely rigid rip fence with cam action clamps, comprising a cast iron housing with an extruded alloy fence rail giving a

max capacity of 620mm to the blade is also standard.

The power/saw head is mounted in a ver y rigid cast iron frame, the adjustments for rise and fall and blade tilt are via large, chromed steel

hand wheels which are exceptionally smooth in operation. The handwheels also have in-built locking facilities. Dust extraction is via arear mounted 100mm port and a connection hose to the crown guard. A conveniently mounted switch box has a locking emergency

stop button and features overload protection and individual phase fused protection.

This saw is simply per fect for the small general woodworking workshop, school technicians or maintenance departments requiring a

simple, robust dimension saw. N.B.16A supply required.

Cast iron main table and folding sliding table

Mechanically braked induction motor, choice of 1 or 3ph

Rigid rip fence with cam action clamps

Blade controls are smooth and precise, with position locks

Main switchgear has overload and fused protection

Emergency Stop button with lock function

Model TSCE-12

Rating Industria

Power 2.2kW (230V) - 3.75kW (415V

Blade Dia/Bore 305mm/30mm

Blade Tilt 0 - 45



Max Width of Cut with Fence 620mmTable Size 866 x 800mm

Table Height 860mm


Dust Extraction Outlet 100mm + 60mm

Overall L x W x H 650 x 850 x 900mm

Weight 287k

TSCE-12R 305mm Table Saw 230V 2,149.50 1,791.25 70015

TSCE-12R 305mm Table Saw 415V 2,179.50 1,816.25 60080

Saw Blade 305 x 3.2 x 30mm x 28T 63.00 52.50 95152

Saw Blade 305 x 3.2 x 30mm x 48T 84.95 70.79 95152

Saw Blade 305 x 3.2 x 30mm x 72T 118.96 99.13 95152

Saw Blade 305 x 3.2 x 30mm x 96T 110.50 92.08 95152




Industrial Rip Saws

Axminster Industrial Series TSCE-400R-1 400mm Table SawThis saw is a larger version of our TSCE-12R table saw, having the same basic design but remaining quite compact in size and extremely

robust. Available as a basic rip saw model, this machine is constructed around a heavy gauge welded steel chassis with a heavily braced

cast iron table of very generous proportions. The 5.6kW 415V 3ph motor drives the 400mm blade giving ample power even at the

maximum 130mm depth of cut. There is a 680mm width of cut from blade to fence, the rip fence being a heavy cast iron base running on

a solid steel bar with fine width adjustment and a deep section alloy extrusion slid ing fence rail. Fitted with cam lock clamps, this fence

will remain in place even under arduous cutting conditions. A heavy duty cast iron mitre fence running in a T slot is provided.

There is a full overhead crown guard provided for full blade protection, complete with excellent provision for dust extraction. The saw

motor/arbor frame is a massive casting providing rigidity and vibration damping qualities, all adjustments to the blade height and tilt

being made by the extra large cast iron hand wheels. The hand wheels also have built in locking facilities to prevent movement of the

blade from the settings made, and are exceptionally smooth in operation. A conveniently situated switch box has a locking emergency

stop button, features overload protection and individual phase fuses. A separate foot operated emergency stop switch is conveniently

situated to provide extra operator safety. Supplied with a 400mm diameter, 28T rip blade. An ideal saw for producing large frames for

roofing, joists, gate posts or processing other heavy timbers. There are two extra options that can be added to the basic saw:

1. A large right hand extension table, complete with a longer rip fence rail and extension to the overheard crown guard. This will give up

to 1175mm width of cut from blade to fence. There is also a lower storage platform for materials etc.

2. A simple sliding table kit, comprising an alloy extrusion sliding table, and a cross cut table with a telescopic support leg. This is easy to

fit, fully adjustable and will give 1360mm before the blade. It also has a mitre fence rail with a flip over l ength stop.

Substantial cast iron table, ground for accuracy

Mechanically braked high efficiency induction motor

Rigid rip fence with cam action clamps

Blade rise and fall plus tilt via smooth acting hand wheels

Full overload protection and emergency stop switch provisio

Additional options available

Right hand

extension table

Sliding table

and crosscut

table kit

Rating Indust

Power 5.6

Max Depth of Cut @ 45 93m

Max Depth of Cut @ 90 130m

Max Ripping Width 680mTable Size 1,125 x 900mTable Height 850m

Dust Extraction Outlet Cabinet - 150mm , Crown guard - 100m

Weight 430

T SC E-400R-1 Table Saw 415V 3,689.50 3,074.58 210

R ight Hand Extension Table 547.00 455.83 210

1500mm Sliding Table 410.50 342.08 210

Cross Cut Table 364.50 303.75 210

Sliding Table & Crosscut Table Kit 736.00 613.33 718

Saw Blade 400 x 3.8 x 30mm 36T 95.99 79.99 951

Saw Blade 400 x 3.8 x 30mm 60T 127.50 106.25 951

Saw Blade 400 x 3.8 x 30mm 84T 169.50 141.25 951

Saw Blade 400 x 3.8 x 30mm 120T 171.00 142.50 951

Inc.vat Ex. vat C


8/24

Fine grain Tungsten Carbide Tippedblades for the professional user

featuring resin filled laser cut slots

that dampen vibration.

The Premium range is from 254mm to 400mm and is aim ed very much at

the professional and industrial user. Basically manufactured in the same

way, each plate is ground to an exceptional standard of accuracy, having

a blade run-out of no more than 0.10mm on the very largest size. The TCT

tips are made from Luxembourg Carbide, known for its consistent quality,

CNC sandwich brazed to the plate and ground to a fine edge. Course toothed

blades are alternate top bevel ground (ATB) whilst the finer toothed blades are

top centre ground (TCG), ensuring the best performance for each application. The

plate of the blade also has resin filled anti vibration slots. These greatly reduce the noise

generated whilst cutting which must be a bonus for the saw operator and those nearby. These

blades are recognised by the HSE as an invaluable method of reducing workshop noise. The Premium

blades will give an exceptional cutting performance combined with a very reasonable price for such high

technology blades.

These flat adjustable scoring blades will

allow you to make different thickness cuts

by increasing or decreasing number of

spacer shims. The scoring saw is a standard fitting on several of the larger saw

benches in our range, particularly those designed for cutting sheet material. The

blade is fitted a short distance in front of the main b lade and cuts a shallow groove

on the underside of the board, preventing splintering on faced and veneered

boards. The scoring blades listed here are of the adjustable type a nd come in two

parts with a set of shims so that

the cut can be aligned exactly with

that of the main blade. The 80mm

diameter has a 20mm bore

together with 951805 and

951804. 951583 and 951584 are

22mm bore.


General Purpose Saw Blade

254mm Dia

30mm Bore

40 Teeth

3.2mm Kerf ATB

52.99 44.16 951521

Inc.vat Ex.vat Code

Fine Saw Blade

254mm Dia

30mm Bore

60 Teeth

3.2mm Kerf TCG

72.50 60.42 951522

Inc.vat Ex.vat Code

Extra Fine Saw Blade

254mm Dia

30mm Bore

80 Teeth

3.2mm Kerf TCG

88.50 73.75 951523

Inc.vat Ex.vat Code

305mm 315mm

355mm 400mm

254mm

260mm

Rip Saw Blade

254mm Dia

30mm Bore

24 Teeth

3.2mm Kerf ATB

40.96 34.13 951520

Inc.vat Ex.vat Code

Rip Saw Blade

305mm Dia

30mm Bore

28 Teeth

3.2mm Kerf ATB

63.00 52.50 951524

Inc.vat Ex.vat Code


305mm Dia

30mm Bore

48 Teeth

3.2mm KerfATB

84.95 70.79 951525

Inc.vat Ex.vat Code

Fine Saw Blade

305mm Dia

30mm Bore

72 Teeth

3.2mm Kerf TCG

118.96 99.13 951526

Inc.vat Ex.vat Code


305mm Dia

30mm Bore

96 Teeth

3.2mm Kerf TCG

110.50 92.08 951527

Inc.vat Ex.vat Code

Rip Saw Blade

355mm Dia

30mm Bore

28 Teeth

3.5mm Kerf ATB

73.96 61.63 951528

Inc.vat Ex.vat Code

General Purpose Saw Blade355mm Dia

30mm Bore

54 Teeth

3.5mm Kerf ATB

105.50 87.92 951529

Inc.vat Ex.vat Code

Fine Saw Blade

355mm Dia

30mm Bore

72 Teeth

3.5mm Kerf TCG

135.50 112.92 951530

Inc.vat Ex.vat Code


355mm Dia

30mm Bore

108 Teeth

3.5mm Kerf TCG

139.00 115.83 951531

Inc.vat Ex.vat Code

Rip Saw Blade

400mm Dia

30mm Bore

36 Teeth

3.8mm Kerf AT

95.99 79.99 95153

Inc.vat Ex.vat Cod

General Purpose Saw Blade400mm Dia

30mm Bore

60 Teeth

3.8mm Kerf AT

127.50 106.25 95153

Inc.vat Ex.vat Cod

Fine Saw Blade

400mm Dia

30mm Bore

84 Teeth

3.8mm Kerf TCG

169.50 141.25 95153

Inc.vat Ex.vat Cod


400mm Dia

30mm Bore

120 Teeth

3.8mm Kerf TCG

171.00 142.50 95153

Inc.vat Ex.vat Cod

Rip Saw Blade

315mm Dia

30mm Bore

28 Teeth

3.2mm Kerf ATB

66.95 55.79 501023

Inc.vat Ex.vat Code


315mm Dia

30mm Bore

48 Teeth

3.2mm Kerf ATB

90.50 75.42 501024

Inc.vat Ex.vat Code

Cross Cut Saw Blade

315mm Dia

30mm Bore

72 Teeth

3.2mm Kerf TCG

126.50 105.42 501025

Inc.vat Ex.vat Code


315mm Dia

30mm Bore

96 Teeth

3.2mm Kerf TCG

117.00 97.50 501026

Inc.vat Ex.vat Code

Negative Rake Saw Blade

260mm Dia

30mm Bore

60 Teeth

2.5mm Kerf ATB

72.50 60.42 501027

Inc.vat Ex.vat Code

Negative Rake Saw Blade

260mm Dia

30mm Bore

80 Teeth

2.5mm Kerf AT

89.50 74.58 50102

Inc.vat Ex.vat Cod

Axcaliber SplitScoring Blades

80 x (2.8-3.6mm) 49.55 41.29 95158

100 x (2.8-3.6mm) 51.95 43.29 95158

120 x (2.8-3.6mm) 53.95 44.96 95158

100 x (2.8-3.6mm) 51.95 43.29 95180

120 x (2.8-3.6mm) 53.95 44.96 95180

Inc.vat E x. vat Co d


9/24

Table tilt quadrant

AP5300T

Industr1,500W (230

575 & 1,200m/m

3,860mm(15

6mm(1/4)/25mm(

510m

310m

530 x 530m

10 - 0 - 4

950m

2 x 100m

1,020 x 790 x 2,040m

163


Industrial Bandsaws

Cast iron wheels

Large cast table

Axminster Industrial Series AP3501B3 BandsawThe AP3501B3, with its high quality, specification and modest price, is an upgraded machine for the

small trade workshop. The combination of rigidly built steel body, finely ground cast iron table, deepsection rip fence and fully adjustable ball bearing blade guides produce the level of performance

demanded by both the trade and advanced skills amateur user. The rip fence runs on a calibrated

aluminium extrusion and is locked firmly i n place with a camlock lever, giving a firm and accurate

location. The adjustable precision mitre fence is T-slotted into the table for added safety and accuracy.

At the rear of the machine are the blade tracking control, the blade tension indicator and a quick

action blade tension lever, useful for both blade changing and for releasing the tension on the blade

when the machine is not in use. Safety features include a electro-magnetic motor brake, interlocked

and micro switched doors and a key release emergency stop switch. Supplied complete with floor

stand, rip fence and blade. This upgraded bandsaw is fully compliant with both the requirements of

BS 4163:2008 (for educational establishments) and PUWR98 (workplace) regulations. This machine

will also appeal to those requiring the very highest standards of performance and safety in their

workplace. Please contact our Specialist Sales Department (0845 0707870) for further details.

Model AP3501B3

Rating Industrial

Power 750W

Blade Speed 800m/min

Blade Length 2,552mm(100.1/2)

Blade Width Min/Max 3mm(1/8)/19mm(3/4)

Max Width of Cut 340mm

Max Depth of Cut 200mm


Table Height on Stand 1,060mm

Table Tilt 10 - 0 - 45

Table Height 490mm

Dust Extraction Outlet 100mm

Overall L x W x H 445 x 610 x 1,753mm

Weight 85kg

AP3501B3 Bandsaw 230V 1,049.50 874.58 700356

Pack of 5 Blades 2,552mm 62.00 51.67 719580

2,552mm x 19mm x 4-6Tpi 41.30 34.42 211501

2,552mm x 13mm x 6-10Tpi 38.90 32.42 212025

2,552mm x 13mm x 10-14Tpi 38.90 32.42 212034

Inc.vat Ex. va t Code

These floor standing Axminster Industrial Series bandsaws are designed for continuous use in the

busy workshop or manufacturing situation. Powerful, smooth running induction motors, large cut

capacities, steel and cast iron construction and manufactured to the exacting standards expected

from our Plus range of machines. They offer excellent safety features including electro-mechanica

braked motors, key release emergency stop switch and safety interlocked doors. Features include

iron table, cast iron wheels, two blade speeds, heavy duty blade bearing guides throughout, mitre

fence and an exceptionally rigid rip fence with an easy to read magnifying scale. Fitted with two x

100mm dust outlets for excellent dust control when fitted to a suitable extractor. These upgraded

bandsaws are fully compliant with both the requirements of BS 4163:2008 (for educational

establishments) and PUWR98 (workplace) regulations. Please contact our Specialist Sales Departm

(0845 0707870) for further details. N.B 16A supply is required.

Model AP4300T/1

Rating IndustrialPower 1,500W (230V)

Blade Speed 430 & 850m/min

Blade Length 3,327mm(131)

Blade Width Min/Max 3mm(1/8)/25mm(1)




Table Tilt 10 - 0 - 45

Table Height 950mm

Dust Extraction Outlet 2 x 100mm


Weight 145kg

AP4300T/ 1 Bandsaw 230V 1,289.50 1,074.58 700

AP5300T/ 1 Bandsaw 230V 1,409.50 1,174.58 700

3,327mm x 13mm x 6-10Tpi 49.00 40.83 951

3,327mm x 13mm x 10-14Tpi 57.00 47.50 951

Inc.vat Ex. vat C

AxminsterIndustrial Series AP4300T/1 & AP5300T/1 Bandsaws

Blade quick release lever

Lower blade guide


10/24

AP6300HD3

Industrial

3.7kW (415V)

1,615m/min

4,600mm(181)9.5mm(3/8)/38mm(1.1/2)

620mm

405mm

600 x 850mm

0 - 45

830mm

2 x 100mm

1,190 x 750 x 2,060mm

380kg


Industrial Bandsaws

These heavy duty Axminster Industrial Series bandsaws are designed for continuous use in

manufacturing or production facilities. Powered by electro-magnetically braked motors that offer

ample power at full depth of cut in all timbers. The heavily fabricated chassis is in welded steel withperfectly balanced solid cast iron wheels to give exceptionally smooth running. It has a very large cast

iron ground surfaced table with a user friendly table tilt rack and pinion mechanism, table lock lever,

mitre fence and a deep section cast iron rip fence with solid chromed steel rail. Other features include

safety interlocked doors, heavy duty blade guide bearings throughout, twin belt drive with si mple to

adjust belt tightening, and a quick release blade tensioning lever to simplify and speed up the blade

changing process. Dust extraction is well catered for with two x 100mm outlets, offering almost dust

free cutting when connected to a suitable extractor. Offering up to a full 620mm(24) cutting width

and a 405mm(16) cutting depth, the AP6300HD is the machine to have for processing those large

workpieces that defeat lesser bandsaws! These models are fully compliant with PUWR98 (workplace)

regulations and will appeal to those seeki ng the highest standards of safety and performance. The

AP5300-TH3 also complies with BS4163-2007 making this machine suitable for educational use. For

further details contact our Specialist Sales Dept (0845 0707870).N.B. 3ph only.

Model AP5300HD3

Rating Industrial

Power 2.2kW (415V)

Blade Speed 1,370m/min

Blade Length 4,190mm(165)Blade Width Min/Max 6.3mm(1/4)/35mm(1.3/8)




Table Tilt 0 - 45

Table Height 900mm



Weight 264kg

AP 530 0HD 3 B an ds aw 4 15 V 1, 97 9. 50 1,649.58 700354

AP 630 0HD 3 B an ds aw 4 15 V 2, 65 9. 50 2,216.25 700352

4,190mm x 19mm x 4-6Tpi 66.50 55.42 951670

4,190mm x 13mm x 6-10Tpi 60.95 50.79 951669

4,597mm x 13mm x 6-10Tpi 66.00 55.00 951671

4,597mm x 19mm x 4-6Tpi 72.50 60.42 951672

Inc.vat Ex. vat Co de

Axminster IndustrialSeries AP5300HD3 & AP6300HD3 Bandsaws

Balanced Alloy Wheels

Rigid Table Trunnion

Quick Release Blade Lever

Jet JWBS-14Q Bandsaw

The Jet JWBS-14Q is intended for heavy work and has balanced cast alloy blade wheels, a superb castiron table which can tilt from -10 to +45, and a locking rip fence which is supported at the front and

rear of the table and extends slightly beyond the cast iron table to give an excellent capacity on both

sides of the blade. On the face of the rip fence is a parallel cutting attachment which is ideal for re-

sawing. The mitre fence is T slotted into the table for accuracy, safety and extended capacity. The blad

is guided both above and below the table with micrometer-adjusted thrust and bearing rollers which

give a positive support to the blade, resulting in a very good quality of cut and extended blade life.

With fully interlocked doors, electro-mechanical motor brake, easily accessible, dual function quick

release blade tension for easy blade changing and tracking controls, this machine is for the profession

workshop where an accurate bandsaw with good capacities will become a very popular machine with

which to work. To move this machine around the workshop we recommend the purchase of the mobil

base unit (708119). This additional base unit is easy to fit and allows the machine to be moved without

fear of tipping the unit over or causing any damage to either the operator or the machine.

Model JWBS-14Q

Rating Industria

Power Input 950W (240V


Blade Length 2,560mm (100.1/2

Blade Width Min/Max 3mm (1/8) 25mm (1



Max Width of Cut with Fence 300mm


Table Tilt 10-0-45

Table Height 880mm

Wheel Diameter 355mm


Overall L x W x H 900 x 1,100 x 1,800 mm

Weight 120kg

JWBS-14Q Bandsaw 979.50 816.25 95034

2,552mm x 19mm x 4-6Tpi 41.30 34.42 21150

2,552mm x 13mm x 6-10Tpi 38.90 32.42 21202

2,552mm x 13mm x 10-14Tpi 38.90 32.42 21203



11/24

The Jet JWBS saws are intended for heavy work and have cast iron blade wheels, a super cast iron table which can til t from -10 to +45,

and a locking rip fence which is supported at the front and rear of the table and extends slightly beyond the cast iron table to give an

excellent capacity on both sides of the blade. On the face of the rip fence is a point cutting attachment which is ideal for re-sawing. Themitre fence is T slotted into the table for accuracy, safety and extended capacity. The blade is guided both above and below the table

with micrometer-adjusted thrust and bearing rollers which give a positive support to the blade, resulting in a very good quality of cut

and extended blade life.

With fully interlocked doors, electro-mechanical motor brake and with easily accessible blade tension and tracking controls, these

machines are for the professional workshop where an accurate bandsaw with good capacities can become a very popular machine with

which to work. To move any of these machines around the workshop we recommend the

purchase of the mobile base unit (stock number 708119). This additional base unit is easy to

fit and allows the machine to be moved without fear of tipping the unit over or causing any

damage to either the operator or the machine. Q models have blade quick release levers.

N.B. A 20A supply is recommended when used with 240 volt supply.


Industrial Bandsaws

Jet JWBS-16Q, JWBS-18Q & JWBS-20Q Bandsaws

JWBS-20Q Bandsaw 240V 1,919.50 1,599.58 210

JWBS-20Q Bandsaw 415V 1,919.50 1,599.58 210

3,820mm x 13mm x 6-10Tpi 55.50 46.25 211

3,820mm x 13mm x 10-14Tpi 50.50 42.08 211

3,820mm x 19mm x 4-6Tpi 54.95 45.79 211

Inc.vat Ex. vat C

JWBS-18Q Bandsaw 240V 1,449.50 1,207.92 210683

JWBS-18Q Bandsaw 415V 1,449.50 1,207.92 210684

3,480mm x 13mm x 6-10Tpi 50.99 42.49 211511

3,480mm x 13mm x 10-14Tpi 46.45 38.71 211512

3,480mm x 19mm x 4-6Tpi 54.50 45.42 211513


JWBS-16Q Bandsaw - 240V 1,239.50 1,032.92 600537

3,124mm x 13mm x 6-10Tpi 42.20 35.17 211502

3,124mm x 13mm x 10-14Tpi 46.40 38.67 211503

3,124mm x 19mm x 4-6Tpi 49.36 41.13 211504


Model JWBS-16Q

Rating Industrial

Power Input 1,100W (240V)



Blade Width Min/Max 3mm(1/8)/32mm(1.1/4)Max Width of Cut 405mm




Table Tilt -10 to +45

Table Height 890mm


Dust Extraction Outlet 100mm (x 2)


Weight 130kg

Model JWBS-2

Rating Industr

Power 2.6kW (240V) - 4.2kW (415

Blade Speed 550 & 970m/m

Blade Length 3,820m

Blade Width Min/Max 3mm(1/8)/32mm(1.1/Max Width of Cut 508m

Max Depth of Cut 300m

Max Width of Cut with Fence 480m

Table Size 530 x 530m


Table Height 930m

Wheel Diameter 520m

Dust Extraction Outlet 100mm (x

Overall L x W x H 900 x 1100 x 1900m

Weight 230

Model JWBS- 18Q

Rating Industrial

Power 2.6kW (240V) - 4.2kW (415V)

Blade Speed 550 & 970m/min

Blade Length 3,480mm

Blade Width Min/Max 3mm(1/8)/32mm(1.1/4)Max Width of Cut 460mm





Table Height 950mm


Dust Extraction Outlet 100mm (x2)

Overall L x W x H 900 x 1,100 x 1,900mm

Weight 165kg



Industrial Bandsaw Blades

Heavy Duty Machine BaseA choice of two all-steel bases, adjustable for size, with fixed wheels on the back corners and two

lockable castoring wheels on the front. The smaller one will fit machine bases from 460mm to 710m

and take a weight of 250kg whilst the larger one takes bases from 610mm to 860mm and a load of

540kg.

Mobile Base 250kg 85.50 71.25 70811

Machine Mobile Base 540kg 95.99 79.99 70811


This is a primary

wood processing

and ripping

bandsaw bladedelivered ready for

immediate work.

Manufactured from premium

carbon rich European steel, each

tooth is ground using high precision

CNC machinery rather than being

punched and sharp ened. The teeth are

then induction hardened, ensuring an

outstanding life and as many as 20 re-sharpens before the

blades cutting performance is reduced.

These blades offer the longest working life and the best possible

cutting performance. Your

bandsaw is only as good as

the blade thatyou fit. The Ripper 37 has

no compromises.

Adjustable 5 point ball

bearing guides

Model VBS18MW

Rating Industrial

Power Input 2.2kW

Blade Speed Wood 250/450/820m/min

Metal 20/40/70m/min


Blade Width Min/Max 3mm(1/8)/30mm(1.1/8)




Table Tilt 45-0-10

Table Height 950mm



Overall L x W x H 970 x 1,070 x 1,900mm

Weight 210kg

VBS18MW Bandsaw 230V 1,979.50 1,649.58 600755

3,480mm x 19mm x 4-6Tpi 54.50 45.42 211513

3,480mm x 13mm x 6-10Tpi 50.99 42.49 211511

3,480mm x 13mm x 10-14Tpi 46.45 38.71 211512


Jet VBS18MW Wood& Metal Cutting BandsawThis bandsaw has been designed for a workshop that requires a wood cutting bandsaw with the

capability of occasional metal cutting, or vice versa. The VBS18MW is capable of cutting timber,

ferrous and non-ferrous metals (using the correct blade). A two speed gearbox lets you choose the

ideal cutting speeds for wood or metal, the three belts speeds givi ng 250, 450 or 820m/min or 20, 40

or 70m/min. Adjustment for the most suitable speed for efficient cutting is straight forward. The

bandsaw is supplied with two chip trays for the separate collection of metal cutting swarf. A large

hand wheel and rack system allows simple adjustment of the cutting height and there is an easy to

read built-in cutting height scale. The blade is well supported above and below the table by ball

bearing guides. A viewing window is provided for easy blade tracking control, the blade runs on

balanced cast iron wheels with crowned, long-life PU tyres. The generous cast iron table tilts from -

10to + 45, and is supplied with both rip cutting and mitre

cutting fences. Standard equipment includes: On/Off NVR switch,

20mm bandsaw blade 2 chip trays, rip fence, mitre fence and

crosscut vice.

All blades are 32mm

(1.1/4") wide x 1.1tpi

3,480mm (137) 117.50 97.92 50107

3,820mm (150) 125.99 104.99 50108

4,010mm (157) 131.99 109.99 50108

4,190mm (165) 139.00 115.83 50107

4,450mm (175) 148.96 124.13 50107

4,600mm (181) 152.50 127.08 50107

5,125mm (202) 172.96 144.13 50107

Inc.vat Ex. va t Co dPacks of 5

3,480mm (137) 33.30 27.75 50110

3,820mm (150) 36.60 30.50 50110

4,010mm (157) 38.40 32.00 50110

4,190mm (165) 40.10 33.42 50109

4,450mm (175) 42.60 35.50 50109

4,600mm (181) 43.99 36.66 50109

5,125mm (202) 49.00 40.83 50110

Inc.vat Ex. va t Co dIndividuals

Bandsaw Blade LengthModel (mm)

Axminster AP5300HD3 4,190

Axminster AP6300HD3 4,600

Axminster HB600A 4,450

A xmi ns te r H B70 0 5, 12 5

Jet JWBS-18Q 3,480

Jet JWBS-20Q 3,820

Jet VBS18MW 3,480

Woodmizer 4,010


13/24

A machine in the best traditional fashion, the Axminster Industrial SETM-2HD 2 Head Tenoner is designed and built to withstand

continuous production use. Its cast iron base, column and slid e ways provide a rigid and durable mainframe assembly, and the high

efficiency motors supply ample power. The large, ground cast iron sliding table slides easily on its ball r

supported wheels, and cutter head slide movements are smooth and easily adjusted on dovetail slides

Extremely versatile and taking only minutes to set up, the Axminster Industrial SETM-2HD tenoner is ea

to use and accurate in operation. Work is positioned on the rolling table against an end stop and a fenc

and is secured by a cam action clamp. Its end is then passed between two vertically mounted cutter he

which machine the top and bottom cheeks of the tenon. The tenon width is set by raising or lowering t

top motor, and its position on the timber by raising/lowering the two motors in tandem. Variations in

shoulder length are set using the rule on the end stop, and staggered tenons are achieved by simple h

wheel adjustment of the top motor, with digital counters to help the measurements. Each cutting head

provision for profile knives to enable the cross section of the components being jointed to be

matched. Stepped tenons, splayed tenons, double tenons and multiple bridles are all poss

on this versatile

machine.

Combinations of 90

and bevelled cutting

discs with appropriatespacers can also be

fitted to produce

interleaved joints as

used in sash window construction. This

tenoner may also be used to produce comb and

finger joints by replacing the main cutter heads

with the appropriate disc type cutters.

N.B. 16 Amp supply required.


Industrial Tenoners

Axminster Industrial Series SETM-2HD 2 Head Tenoner

Two separately powered heads

Fully braked individually switched motors

Emergency foot operated stop switch

Full thermal overload protection

Two main heads equipped with four replaceable shear-cutting knives and two spur cutters

Cam action work clamp

Two main cutter heads 175 x 60mm Invaluable in any production workshop

Model SETM-2HD

Rating Industr

Power 2 x 2.2kW (230V 1ph) - 2 x 2.2kW (415V 3pMain Cutter Heads 2,175 x 60m

Vertical Adjustment Bottom Block 0-60m

Vertical Adjustment Top Block 0-100m

Horizontal Adjustment Top Block 32m

Timber Capacity Height Fence @ 45 130m

Timber Capacity Width Fence @ 45 195m

Timber Capacity Width Fence @ 90 310m

Max Length of Tenon Single Pass 155m

Max Length of Tenon Two Passes 205m

Table Size 800 x 310m

Dust Extraction Outlet 2 x 150m

Overall L x W x H 1,320 x 1,020 x 1,560m

Weight 420

SETM-2HD 230V (1ph) 4,359.50 3,632.92 211

SETM-2HD 415V (3ph) 4,189.50 3,491.25 211

K nive s 6 0 x 12 x 1 .5 mm (P kt 10 ) 4 1. 60 34.67 100

Inc.vat Ex. vat C


14/24

A machine in the best tradition, the Axminster Industrial Series

SETM-3HD 3 Head Tenoner is designed and built to withstand

continuous production use. Its cast iron base, column and sl ide

ways provide a rigid and durable mainframe assembly, and the

high efficiency motors supply ample power. The large, ground

cast iron sliding table slides easily on its ball race supported

wheels, and cutter head slide movements are smooth and easily

adjusted on dovetail slides.

Extremely versatile and taking only minutes to set up, the

Axminster Industrial SETM-3HD Tenoner is easy to use and

accurate in operation. Work is positioned on the rolling table

against an end stop and a fence, and is secured by a cam actionclamp. Its end is then passed between two ver tically mounted

cutter heads which machine the top and bottom cheeks of the

tenon. The tenon width is set by raising or lowering the top motor,

and its position on the timber by raising/lowering the two motors

in tandem. Variations in shoulder length are set using the rule on

the end stop, and staggered tenons are achieved by simple hand

wheel adjustment of the top motor, with digital counters to help

the measurements. Each cutting head has provision for profile

knives to enable the cross section of the components being

jointed to be matched. The standard scribing head allows many

different configurations of tenons to be achieved.

Stepped tenons, splayed tenons, scribed tenons, double tenons,

and multiple bridles and finger joints are all possible on this

versatile machine. Combinations of 90 and bevelled cutting discs

with appropriate spacers can also be fitted to produce interleaved

joints as used in sash window construction.N.B. 32 Amp supply

required.


Industrial Tenoners

Easy cutterblock access

Axminster Industrial SeriesSETM-3HD 3 Head Tenoner

Three separately powered heads

Fully braked individually switched motors

Emergency foot operated stop switch

Full thermal overload protection

Two main heads equipped with four replaceable shear-cutting

knives and two spur cutters

Third scribing head

Cam action work clamp Invaluable in any production workshop

Rating Industria

Power 3 x 2.2kW (230V 1ph) - 3 x 2.2kW (415V 3ph

Main Cutter Heads 2, 175 x 60mm. 1, 125 x 60mm

Vertical Adjustment Bottom Block 0-60mm

Vertical Adjustment Scibing Head 95mm

Vertical Adjustment Top Block 0-100mm

Horizontal Adjustment Scibing Head 95mm

Horizontal Adjustment Top Block 32mm

Scribing Head Shaft Diameter 75 x 30mm

Timber Capacity Height Fence @ 45 130mm

Timber Capacity Width Fence @ 45 195mm

Timber Capacity Width Fence @ 90 310mm

Max Length of Tenon Single Pass 155mm

Max Length of Tenon Two Passes 205mmTable Size 800 x 310mm


Overall L x W x H 1,320 x 1,020 x 1,560mm

Weight 470kg

Sliding table and material clamp

SETM-3HD 230V 1ph 4,849.50 4,041.25 21152

SETM-3HD 415V 3ph 4,679.50 3,899.58 21069

K ni ves 60 x 1 2 x 1. 5mm (P kt 10 ) 41. 60 34.67 10072


Optional Large Scribing HeadThis optional 125 x 65mm scribing head for use with the

Axminster and Sedgwick TESH three head tenoners.

Optional 125 x 65mm Scribing Head 182.50 152.08 90025




Industrial Morticers

Axminster Industrial SeriesYC2308 Floor Standing MorticerA heavy duty morticer of 25mm capacity, cast iron construction with a welded steel stand. With many

features such as single handwheel design for both longitudinal and lateral table movement, two

position material clamp for fast clamping, multi-position hand lever positions to provide the correct

leverage for comfortable use, gas strut to provide smooth downward travel of the chisel head, also

allowing travel stop in any position, large storage space in stand cupboard, large table surface with

tall back fence, easily set depth stop for repeat accuracy and feet brackets provided to allow machineto be bolted to the workshop floor. This machine is well suited to the busy workshop and will provide

years of accurate and trouble free use. N.B. A chisel morticer will only work as well as the chisel cuts,

please do not stint on the quality of the chisels you purchase. Accepts 1.3/16 and 13/16 chisels.

Lateral table travel 90mm, longitudinal 400mm.

Single handwheel design for both longitudinal

and lateral table movement

Two position material clamp for fast clamping

of a variety of material sizes

Multi-position hand lever positions to provide

the correct leverage for comfortable use

Gas strut to provide smooth downward travel

of the chisel head

Large storage space in stand cupboard Large table surface with tall back fence

Easily set depth stop for repeat accuracy

Feet brackets provided to allow machine to be

bolted to the workshop floor

Maximum chisel size 25mm (softwood), 19mm

(hardwood)

Chisel bushing size 1.3/16 OD

Model YC 2308

Rating Industrial

Power 750W

Chisel Stroke 125mm

Max Height of Timber with 12.7mm Chisel and Bit 170mm

Max Chisel Size Softwood 25mm

Max Chisel Size Hardwood 19mm

Overall L x W x H 670 x 560 x 750mm

Weight 165kg

YC2308 Floor Standing Morticer 230V 1,069.50 891.25 600801

YC2308 Floor Standing Morticer 415V 1,069.50 891.25 600816

Inc.vat E x. va t Code

Jet 719-AFloor Standing MorticeA floor standing morticer with a 25mm

capacity. The unique screw and fast action n

allows the material clamp to be set across it

length in seconds. With fully adjustable

slideways the morticer has travel in both

directions with lock on the fore and aft setti

The main operating handle has a clever ratc

setting which allows it to be quickly set in th

correct position for optimum leverage. The

depth stop is simple and very effective to us

Along the back of the main table is a mortic

length setting device which allows the mort

length to be pre-set for reduced marking ou

The cabinet base is fabricated from heavy

gauge sheet steel and incorporates a shelf i

the base for storage of chisels, bits and servi

tools. Bushes are provid ed for 3/4, 13/16 an

1.13/16 shank chisels. Supplied with cabine

base, chisel bushings and service tools.

25mm capacity

Accurate and quick-to-change material clamp

Fully adjustable slideways

Ratchet setting on main operating handle

Motor and switch gear are vir tually silent in operat

Simple and effective depth stop

Head rotates 180 for door lock morticing

Cabinet base fabricated from heavy gauge sheet st

Supplied with bushes for 3/4, 13/16 and 1.13/16shank chisels and cabinet base

Model 719Rating Indust

Power Input 1,300

Chisel Stroke 140m

Centre of Chisel to Back Fence 100m

Max Height of Timber with 12.7mm Chisel and Bit 190m

Max Chisel Size Softwood 25m

Max Chisel Size Hardwood 19m

Overall L x W x H 700 x 580 x 950mm (1,550mm inc stan

Weight 110

719A Morticer 240V 963.95 803.29 310

Inc.vat E x. vat C

Japanese Pattern Mortice Chisels & Bits, MetricJapanese Pattern. The auger bit on this type has a point on the end, one cutting spur and a single

spiral for rapid chip clearance. The single spur is easy to sharpen and the bits cut evenly and fast, ev

in the hardest of timbers. N.B. As all the auger bits have to accommodate different machines th

are supplied long and will need cutting with a conventional hacksaw blade to suit the specifi

machine for which purchased.

A = Size

B = Maximum Depth

C = Mounting Diameter

D = Bit Shank Diameter

6 mm 4 5m m 1 3/1 6 5/32 5 5.5 0 46.25 5108 mm 5 6m m 1 3/1 6 5/32 5 5.5 0 46.25 510

1 0m m 7 3m m 1 3/1 6 1/ 4 5 8.9 6 49.13 510

1 2m m 7 9m m 1 3/1 6 3/ 8 6 8.9 9 57.49 510

1 6m m 9 8m m 1 3/1 6 1/ 2 7 8.9 5 65.79 510

2 0m m 1 2 7m m 1 .3 /1 6 1 /2 97 .5 081.25 510

A B C D Inc.vat Ex.vat Co



Industrial Spindle Moulders

Axminster Industrial SeriesSS-510M Spindle MoulderThis is a good, solid compact spindle moulder, built for

professional use and based around a heavy gauge welded steel

chassis that is powder coated for protection. The table is high

grade cast iron, with a finely ground low friction surface and has

small cast iron sliding table that moves on precision bearings. Th

also has a cam lock material clamp and angle fence. The 30mm

diameter spindle has 100mm travel, is non-tilting and is driven b

a 3hp (1ph) or 4hp (3ph) induction motor via a three speed belt

drive. Having a capacity of 180mm below the table and 200mmabove, a wide range of tooling to handle many tasks can be used

A nicely designed fence/hood assembly is fitted with fully

adjustable fence wings and material hold down guides. The tabl

is pre-drilled for a power feed (Co-Matic AF32 Junior).N.B.

16Amp supply required

Substantial cast iron and welded steel construction

30mm diameter spindle with three spindle speeds

Small cast iron sliding table with work clamp

Comprehensive fence/extraction hood system with

adjustable fences

180mm tool diameter below, 200mm above the table

Choice of 230V 1ph or 415V 3ph versions

Model SS-510M

Rating Industria

Power 2.2kW (230V 1ph) - 2.95kW (415V 3ph

Spindle Travel 100mm

Spindle Diameter 30mm

Max Spindle Projection above Table 100mm

Max Tooling Diameter Above Table 200mm

Max Tooling Diameter Below Table 180mm

Table Height 850mm


Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4


Weight 200kg

SS-510M Spindle Moulder 1ph 2,649.50 2,207.92 50100

SS-510M Spindle Moulder 3ph 2,539.50 2,116.25 50100


Axminster Industrial SeriesSS-512ML Spindle Moulder 3phA rugged medium sized professional spindle moulder with a

deep section, precision ground high grade cast iron table. With a

choice of five spindle speeds and a capacity of 335mm tooling

diameter above the table many deep profiles and rebates can be

machined. Ample power is available from its 4.1kW braked

induction motor and, with a very large access panel, the spindle

speeds are easily changed. A large spindle height control handle

is also provided with an indication gauge for precise spindle

setting. All electrical controls are grouped on the front panel for

convenience along with the spindle speed indicators. The cast

fence and extraction hood is fitted with extra long fence wings,

each individually micro-adjustable for accurate machining. The

table is pre-drilled for a power feed (Co-Matic AF32 Junior).

Precision ground cast iron table with deep sections

30mm spindle with spacing collars

4.1kW 415V motor with five spindle speeds

Maximum tooling diameter above table 335mm

Cast iron fence/extraction hood with extra long

adjustable extensions

All controls grouped on the front panel for

ease of use

Model SS-512M

Rating Industria

Power 4.1kW (415V 3ph

Spindle Travel 170mm

Spindle Diameter 30mm

Max Tooling Diameter Above Table 335mm

Max Tooling Diameter Below Table 210mm

Table Height 870mm

Table Size 1,300 x 850mm

Dust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4


Weight 530KG

SS-512ML Spindle Moulder 3ph 4,059.50 3,382.92 50100



17/2410Order online www.axminster.co.uk/industrial

Industrial Spindle Moulders

Power Feeds

Co-Matic AF308 Power FeedA heavy duty power feed with four speeds from 2.9 to 11.5m/min

for the 240V 1ph or eight from 2.9 to 23m/min on the 415V 3ph

version. The unit has a 50mm column and a 200mm depth under

the head with a far more powerful motor than the smaller units

previously listed. The three rollers are 50mm wide and provide agreater traction with this increased width. Due to the weight of

this item, it is recommended to fix it directly to the table top of

the machine. For the professional workshop.

Model AF308

Rating Trade

Power 375W

Max Capacity 200mm

Reach 415mm

Feed Speed 2.9 to 11.5m/min (1ph)

2.9 to 23m/min (3ph)

Roller Size 100 x 50mm

Weight 50kg

AF308 Power Feed 240V 701.99 584.99 210134

AF308 Power Feed 415V 690.50 575.42 210135

Replacement Roller (1) 8.86 7.38 100394


Co-Matic AP34 Power FeedA heavy duty industrially rated power feeder for professional use.

The weight and duty of this machine is adequate for nearly all

production applications. The unit has four feed speeds and three

60mm traction rollers. Four way adjustable mounting arm. A

heavy duty roller is also available as an upgrade if needed. Must

be mounted directly onto the machine. This unit is available

only in 415V 3ph.

Model AP34

Rating Industrial

Power 735W

Max Capacity 215mm

Reach 760mm

Feed Speed 4 - 22m/min

Roller Size 120 x 60mm

Weight 60kg

AP34 Power Feed 415V 752.50 627.08 210138


Heavy Duty Roller (1) 16.45 13.71 100393


Co-Matic AP48 Power FeedAn extra heavy duty industrially rated power feeder for

production use. The grip afforded and the choice of speeds of

machine make it suitable for all production applications. The u

has eight feed speeds and four 60mm traction rollers. Four wa

adjustable mounting arm. A heavy duty roller (100393) is also

available as an upgrade if needed. Must be mounted directly o

the machine. This unit is available only in 415V 3ph.

Model AP

Rating Industr

Power 735

Max Capacity 215m

Reach 760m

Feed Speed 2 - 33m/m

Roller Size 120 x 60m

Weight 63

AP48 Power Feed 415V 3ph 852.50 710.42 201


Heavy Duty Roller (1) 16.45 13.71 100

Inc.vat Ex. vat C

Axminster Industrial SeriesSS-512TSL Spindle Moulder 3phA rugged medium sized professional spindle moulder with a

deep section, precision ground high grade cast iron table. An

integrated sliding table runs on six adjustable ball bearings giv

exceptionally smooth travel. The 30mm diameter spindle can t

forward 10 and backwards 45 which has many advantages

including:

Safer working, machining from under the workpiece gives

optimum operator protection

Possibility of machining any size of workpiece

Full use of pressure guards and power feeders without

obstruction

Minimising the load on the spindle bearings to increase the

durability of the machine

Gives perfect dust collection, the waste is directed straight in

the extraction port

Precision ground cast iron table with i ntegrated sliding table

30mm spindle, tilts +10 to -45 to give the greatest flexibility of use

4.1kW 415V motor with 5 spindle speeds

Maximum tooling diameter above table 360mm

Cast iron fence/extraction hood with extra long adjustable extensions

All electrical controls grouped on the front panel for ease of use

Model SS-512T

Rating Industr

Power 4.1kW (415V 3p

Spindle Travel 180m

Spindle Diameter 30m

Max Tooling Diameter Above Table 360m

Max Tooling Diameter Below Table 310m

Table Height 900m

Table Size 1,300 x 960mm inc sliding tabDust Extraction Outlet 1 x 127mm(5), 1 x 100mm(4

Overall L x W x H 1060 x 900 x 1,320m

Weight 650

SS-512TSL Spindle Moulder 3ph 5,009.50 4,174.58 501

Inc.vat Ex. vat C

With a choice of five spindle speeds

and a capacity of 360mm tooling

diameter above the table, many

deep profiles and rebates can be

machined. Ample power is

available from its 4.1kW braked

induction motor and with a very

large access panel, the spindle

speeds are easily changed. Large

spindle control handles are also

provided including an indication

gauge for precise spindle height

setting. All electrical controls are

grouped on the front panel for

convenience along with the spindlespeed indicators. The cast fence and

extraction hood is fitted with extra

long fence wings, each individually

micro-adjustable for accurate

machining. The table is pre-drilled for a

power feed (Co-Matic AF32 Junior).


18/24

There is plenty of power in this machine and the robust construction makes it an excellent choice fo

production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Eithe

75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and

straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The

conveyor is guided on

jackscrews to maintain accuracy

throughout the machines life.

The two speed gearbox canmatch the feed rate to different

types of wood, whilst two x

100mm dust extraction ports

help to create a clean working

environment when connected

to a suitable extractor.

There is plenty of power in this machine and the robust construction makes it an excellent choice fo

production sanding. The rear drum is micro adjustable to allow for variations of stock removal. Eithe

75mm or 100mm wide abrasive strips can be used and changing the abrasive is a quick and

straightforward operation. The sanding drums are hard rubber coated guaranteeing best results. The

conveyor is guided on

jackscrews to maintain accuracy

throughout the machines life.

The two speed gearbox can

match the feed rate to different

types of wood, whilst two x

100mm dust extraction ports

help to create a clean working

environment when connected

to a suitable extractor.


Industrial Sanders

Axminster Industrial Series Oscillating Belt SanderAn industrial quality oscillating belt sander with many nicely thought out features. Well suited to any

small to medium sized joinery workshop or cabinet makers, it is fully guarded and exceptionally easy

to use. Can be used horizontally as well as vertically, the belt oscillates across the platen 50 times per

minute providing a scratch free finish. In the vertical mode the work table can be raised by means of a

hand wheel and adjusted to give a close gap to the sanding belt. A large quadrant scale give an

accurate indication of the belt inclination for bevel work. An additional use is as a small vertical drum

sander with the fitment of any of the three bobbins (1 1/2, 2, 3) supplied, using a smal l table

assembly surrounding the idler roller. A robust, welded steel stand supports the whole machine and

has a large cupboard for storing sanding sheets and accessories. A very well made and a very useful

machine in any workshop.

N.B. 16A 230V supply must

be used.

Belt runs in any angle between 0 and 90

Precision ground steel plate belt platen with low friction

graphite slip plate

Belt oscillation by heavy duty worm gear mechanism

running in an oil bath

Ground cast iron front table can be fully adjusted for

precise alignment with the belt

2 x 100mm dust ports ensure efficient dust collection

Variable height end table for drum sanding is included

Model 200005

Rating Industrial

Power 1,470W

Belt Speed 960m/min

Belt Size 150 x 2,260mm




Weight 180kg

200005 Belt Sander 230V 1,589.50 1,324.58 200005

Belt 150 x 2,260mm 80G 7.00 5.83 300414

Belt 150 x 2,260mm 100G 6.65 5.54 300415

Belt 150 x 2,260mm 120G 6.65 5.54 300416

Belt 150 x 2,260mm 150G 6.65 5.54 300417

Belt 150 x 2,260mm 180G 6.65 5.54 300418


Jet DDS-225Dual Drum Sander

Model DDS-22

Rating Industria

Power Input 5.5kW (415VSpeed 1,400rpm

Feed Speed 2 or 3m/min

Sanding Width Single Pass 635mm

Sanding Thickness Min/Max 0.8/133mm

Sanding Drum Diameter 2 x 152mm



Weight 332kg

DDS-225 Sander 415V 2,589.50 2,157.92 11026


Jet DDS-237Dual Drum Sander

Model DDS-23

Rating Industria

Power Input 8.5kW (415V

Feed Speed 2 or 3 m/min

Sanding Width Single Pass 940mm

Sanding Thickness Min/Max 0.8mm/133mm

Sanding Drum Diameter 152mm



Weight 440kg

DDS-237 Sander 415V 3,919.50 3,266.25 70039



19/2410Order online www.axminster.co.uk/industrial

Industrial Extractors

Numatic NV750Workshop Vacuum ExtractorIdeal for the small, home workshop application and offering

unrivalled performance, the NV 750 workshop vacuum extractor

is in a league of its own. Specifically aimed at users of small,

bench top machines and power tools, this extractor is light in

weight and easily stored under the workbench. The head

assembly incorporates a 1,200W TwinFlo vacuum motor

providing ample power for all tasks and has a 10 metre cord set.

The extractor is fitted with a Permatex filter giving filtration

down to 0.5 micron, with the option of fitting a HepaFlo

disposable filter bag if required, a must when machining MDF.

There is a blower socket for the exhaust air which can be directed

away from the workshop if required. The drum assembly

incorporates a 51mm cyclonic inlet connector for large

dust/chips, and a 51mm front entry for use with HepaFlo bags

making this the perfect solution to almost all small workshopapplications. The accessory kit includes a 2.5 metre 51mm flexible

extraction hose with a rubber expanding cuff for l inking to most

workshop machines with up to 58mm dust ports. A 51mm

stainless steel gulper crevice tool is provided for general

workshop cleaning. A 2.9 metre 32mm hose and step down

adaptor for connecting to hand operated power tools or small,

bench top machines are low cost accessories. The accessories

available enable this machine to

be tailored to your own specific

use, making it suitable for many

uses in your workshop. This

machine is the ideal solution for

those requiring something

portable and also to handle a

large range of extraction tasks,

robustly built in heavy gauge

epoxy painted steel, has a 2 yearwarranty and best of all, its

designed and made in England!

Ideal for the small, home workshop application

1,200W TwinFlo vacuum motor & 35L capacity

all steel drum

Three stage filtration down to 0.5 microns,

HepaFlo bags included

Included is a 2.5 metre x 51mm hose with a

flexible rubber cuff

51mm stainless steel gulper crevice tool

Fits many bench top machines, two year

warranty, made in the UK

Model NV750

Rating Industrial

Power 1,200W 230V

Noise Level 70dB

Overall L x W x H 450mm diameter x 650mm height

Weight 11.2kg

NV750 Vacuum Extractor 230V 238.50 198.75 702413

Extraction H os e 2.9m & Ad aptor 27.55 22.96 718085

2.9m 32mm hose 18.35 15.29 210551

Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 14.16 211015

HEPA Module 194.00 161.67 210658Floor Cleaning Kit 82.00 68.33 600071

Clip-on Mobility Chassis 79.96 66.63 210656


When it comes to workshop applications coupled with unrivalled

performance, the NVD 750 workshop vacuum extractor is in a

league of its own. Many operational features are included within

the package which will enable the user to link the extractor to a

machine or hand operated power tool as required. The head

assembly incorporates two 1200W TwinFlo vacuum motors

providing ample power for all but the most demanding of tasks.

The extractor is fitted with a red Filtrex primary filter and a

secondary Permatex filter as standard, with the option of fittinga HepaFlo disposable filter bag if required, a must when

machining MDF. The Filtrex filter also protects the filter system

from impact damage from fast moving larger chips. There is an

exhaust blower socket to enable the exhaust air to be ducted

away from the workshop if required. The 10 meter cable set

provides all round the workshop use from one power point. The

drum assembly incorporates a 100-32mm cyclonic inlet

connector with a 51mm - 32mm reducer making this the perfect

solution to most workshop applications. The accessory kit

provided with this extractor includes a 4 metre, 100mm flexible

extraction hose for linki ng to most small workshop machines, and

a 2.9 metre 32mm hose and step down adaptor for connecting to

hand operated power tools or small, bench top machines. The

accessories available enable this machine to be tailored to your

own specific use, including a mobility chassis, floor cleaning kit

and a HEPA filter module for the ultimate in fil tration, providing

the best performing machine you could possibly want for yourworkshop. This machine is the best solution for those requiring

something portable and also to handle a large range of extraction

tasks, is ruggedly made in epoxy painted steel, has a 2 year

warranty and best of all, is designed and made in England!

2 x 1,200W TwinFlo vacuum motors,

35L capacity all steel drum

Fitted with a red Filtrex primary filter

and a secondary Permatex filter

Filtration down to 0.5 microns

10m easy change cable set

Supplied with 4m x 100mm flexible

extraction hose, 2.9m x 32mm hose and

step down adaptor for power tool use

2 year warranty,

designed and

made in England

Model NVD750

Rating Industrial

Power 2 x 1,200W 230V

Noise Level 79dB

Overall L x W x H 450mm diameter x 650mm height

Weight 12.8kg

NVD750 Vacuum Extractor 230V 343.50 286.25 702412

Hepaflo Filter Bags NVM-4BH Pkt 10 16.99 14.16 211015

HEPA Module 208.50 173.75 210657Floor Cleaning Kit 82.00 68.33 600071

Clip-on Mobility Chassis 79.96 66.63 210656


CHIPS to FINE Dust

Numatic NVD750Workshop Vacuum Extractor

Numatic NVD1500Workshop Vacuum ExtractorLarge capacity coupled with unrivalled performance make the

NVD 1500 workshop vacuum extractor the answer for today

workshop requirements. The head assembly incorporates two

1,200W TwinFlo vacuum motors providing ample power for a

but the most demanding of tasks. The extractor is fitted with a

Filtrex primary filter and a secondary Permatex filter as

standard, offering filtration down to 0.5 micron, with the optio

fitting a Trapit disposable filter bag if required, essential whe

machining MDF. The steel drum assembly has a maximum

capacity of 50 litres, has 2 carrying grab handles,and incorpora

a 100mm cyclonic inlet connector with a 51mm - 32mm reduc

making this the perfect solution to most workshop application

This size drum has been selected as the largest that can still be

easily handled when full of waste material, anything larger wo

present possible problems when requiring emptying. Theaccessory kit included with the workshop vacuum extractor

includes a 4 metre 100mm vacuum hose for linking to most

workshop machines and a 2.9 metre 32mm hose and step dow

adaptor for connecting to a hand operated power tools or sma

benchtop machines. Many accessories are available to tailor th

machine to your requirements, including a HEPA filter module

the ultimate in filtration. This is a rugged and high performing

machine, designed and built in England!

Two x 1,200W TwinFlo vacuum motors

Fitted with a red Filtrex primary filter and a secondary

Permatex filter

50L capacity all steel drum with carrying handles

Supplied with accessory kit which includes a 4 metre 100mm

vacuum hose, a 2.9 metre 32mm hose and step down adapto

Two year warranty

Designed and made in England

Model NVD15

Rating Industr

Power 2 x 1,200W 23

Noise Level 79

Weight 23

NVD1500 Vacuum Extractor 230V 608.95 507.46 702

Floor Cleaning Kit 82.00 68.33 600

Inc.vat E x. vat C

For guidance on performance ratings, please see Dust Extraction section



Industrial Extractors

Axminster Industrial SeriesUB-2200VECK Cyclone ExtractorThis is a mobile cyclone dust extractor suitable for small to

medium sized trade workshops. Able to handle most types of

wood waste except for the very finest of dusts. With a 200mminlet this is very suitable for a ducted workshop system, or if

required, you could connect to two machines using the included

2 x 100mm adaptor. Nice and quiet in operation and features

automatic filter cleaning for consistent performance. This

machine is a great all round extractor, able to cope with all but

the largest machines. Supplied with 0.2 micron polyester

cartridge filter, plastic collection bag and steel impeller.

N.B. 16A supply required.

Exceptional per formance

on both fine dusts and chippings

Easy mobility thanks to large castor wheels

Automatic filter cleaning for consistent performance

Low noise levels

Large 123 litre

chipping drum

Filter cartridge captures

99% of dust from

0.2-2 microns in size

Steel impellor in close housing

gives exceptional

perfromance

Model UB-2200ECK

Rating Industrial


Noise Level 74dB(A) @ 3m


Weight 115kg

UB-2200VECK Cyclone Extractor 230V 1,579.50 1,316.25 210642


Axminster Industrial SeriesUB-3300VECK Cyclone ExtractorThis is a mobile cyclone dust extractor suitable for the medium to

large sized trade workshops. Able to handle most types of woodwaste except for the very finest of dusts. With a 200mm inlet this

is very suitable for a ducted workshop system, or if required, you

could connect to three machines using the included 3 x 100mm

adaptor. Nice and quiet in operation and features automatic filter

cleaning for consistent performance. This machine is a great all

round extractor, able to cope with even large machines. Supplied

with 0.2 micron polyester cartridge filter, plastic collection bag

and steel impellor.N.B. 16A supply required.

Exceptional performance on both fine dusts and chippings

Easy mobility thanks to large castor wheels

Automatic filter cleaning for consistent performance

Low noise levels

Large 277 litre chipping drum

Filter cartridge captures

99% of dust from

0.2-2 microns in size

Steel impellor in close

housing gives exceptional

perfomance

Model UB-3300ECK

Rating Industrial


Noise Level 78dB(A) @ 3m


Weight 139kg

UB-3300ECK Cyclone Extractor 230V 1,869.50 1,557.92 210643


Axminster Industrial SeriesUB-503 & UB-505 Dust ExtractorsThese are a different style of dust extractor suited to specialist

situations. In a cab

axminster 02 - industrial machines_p85-p108

Documents