aws microwave antenna system relocation kit

AWS Microwave

Antenna System

Relocation Kit

T h e C l e a r C h o i c e ™

Key Products for 6 GHz

Point-to-PointApplications

www.rfsworld.com

Radio Frequency Systems is the wireless

and broadcast infrastructure company

with the strength and resources to serve

the global market with a commanding

array of antenna systems and sub-system

solutions.

RFS spans the continents with strategically

located operations, encompassing design,

manufacturing, distribution, sales and

service operations for markets in North

America, South America, Europe, Africa,

the Middle East, Australia, Southeast Asia

and China.

Radio Frequency Systems brings a long

tradition of design, engineering and

manufacturing expertise to carriers, OEMs,

distributors and systems integrators in the

broadcast, cellular, land-mobile,

microwave and government markets.

Contact InformationRadio Frequency Systems200 Pondview DriveMeriden, CT 06450 USA

Sales & Customer SupportPhone: (203) 630-3311

(800) 321-4700 (Toll-Free USA & Canada)Fax: (203) 634-2272Email: [email protected]

Catalog/LiteraturePhone: (877) RFSWORLDEmail: [email protected]

Technical SupportPhone: (203) 630-3311 x1880

(800) 659-1880 (Toll-Free USA & Canada)Email: [email protected]

©2006 Radio Frequency Systems

In the interest of continued product improvement, Radio Frequency Systems reserves the right to modify product specifications and data withoutnotice. All product information is believed to be accurate at the time of publication, but Radio Frequency Systems shall not be held responsible forprinting or typographical errors. Radio Frequency Systems shall not be liable for any errors or for incidental or consequential damages in connectionwith the furnishing, performance, or use of these products. This document may not, in whole or in part, be copied, reproduced, translated, or reducedto an electronic medium without the prior written consent of Radio Frequency Systems.

Model Number Description Page

Solid Parabolic Microwave Antennas

PA6-W57BC Standard Performance, Single Polarized, 6 ft . . . . . . . . . . . . . . . . . . . .1PA8-W57AC Standard Performance, Single Polarized, 8 ft . . . . . . . . . . . . . . . . . . . .5PA10-W57AC Standard Performance, Single Polarized, 10 ft . . . . . . . . . . . . . . . . . . .9DA6-W57AC High Performance, Single Polarized, 6 ft . . . . . . . . . . . . . . . . . . . . . .13DA8-W57AC High Performance, Single Polarized, 8 ft . . . . . . . . . . . . . . . . . . . . . .17DA10-W57AC High Performance, Single Polarized, 10 ft . . . . . . . . . . . . . . . . . . . . .21PAD6-W59BC Standard (FCC 101, Cat A) , Single Polarized, 6 ft . . . . . . . . . . . . . .25PAD8-W59AC Standard (FCC 101, Cat A) , Single Polarized, 8 ft . . . . . . . . . . . . . .29PAD10-W59AC Standard (FCC 101, Cat A) , Single Polarized, 10 ft . . . . . . . . . . . . .33SU6-59BC SlimLine Ultra High Performance Antenna, Single Polarized, 6 ft . . . .37DA8-59AC High Performance, Single Polarized, 8 ft . . . . . . . . . . . . . . . . . . . . . .41UA10-59AC Ultra-High Performance, Single Polarized, 10 ft . . . . . . . . . . . . . . . . .45UA12-59AC Ultra-High Performance, Single Polarized, 12 ft . . . . . . . . . . . . . . . . .49UXA6-W59BC High Cross Polar Discrimination, Dual Polarized, 6 ft . . . . . . . . . . . . .53UXA8-W59AC High Cross Polar Discrimination, Dual Polarized, 8 ft . . . . . . . . . . . . .57UXA10-W59AC High Cross Polar Discrimination, Dual Polarized, 10 ft . . . . . . . . . . . .61UXA12-W59AC High Cross Polar Discrimination, Dual Polarized, 12 ft . . . . . . . . . . . .65

Elliptical Waveguide

E60 FLEXWELL® Standard Elliptical Waveguide . . . . . . . . . . . . . . . . . . . .69E65 FLEXWELL® Standard Elliptical Waveguide . . . . . . . . . . . . . . . . . . . .73

Dehydrator

APD-20 Automatic Dehydrator, with LP alarm, 0.2 SCFM, 115V, 50/60 Hz . .77

Table of Contents


Radio Frequency Systemsoffers the most compre-

hensive line of highestquality microwaveantennas in the indus-try. Antennas areavailable in all thecommon frequency

bands ranging from3GHz to 60GHz. They are

available in diameters from1 ft (0.3 m) to 15 ft (4.60 m).

System design becomes easy and efficient with such acomprehensive antenna offering.

The antennas are available in four performance classesoffering complete flexibility when designing a net-work.

The antennas meet the pattern requirements accordingto EN 300 631, EN 300 833 and FCC depending on thefrequency range.

In addition to the different electrical classes of anten-nas Radio Frequency Systems offers the system designengineers different options of survival wind speeds.This allows the use of antennas in areas whereextreme wind conditions are normal.

Standard Performance Antennas

Standard Performance Antennas are economical solu-tions for systems where side lobe suppression is of lessimportance. The antennas consist of a reflector, feedand tower mount. Low VSWR versions are availablefor low echo distortion.

STANDARD PERFORMANCE ANTENNASSingle polarized PA & PAL seriesSingle polarized, spread spectrum PSF seriesDual polarized PAX series

Improved Performance Antennas

Improved Performance Antennas areunshrouded and offer an economicsolution for systems requiring goodradiation performance particularly inthe back region. The improved F/Bratio is achieved by use of an effi-cient feed design together with a deepdish reflector. These features result inan improved front to back ratio, andwere specially designed to meet FCCcategory A standards.

IMPROVED PERFORMANCE ANTENNASSingle polarized PAD seriesDual polarized PADX series

Introduction and Antenna Descriptions

High Performance Antennas

High Performance Antennas are similar to Ultra HighPerformance Antennas in construction. They are ideal-ly suited for systems where a good level of side lobesuppression is required.

HIGH PERFORMANCE ANTENNASSingle polarized DA seriesDual polarized DAX series

Ultra High Performance Antennas

Ultra High Performance Antennas are the optimumchoice for systems where a high level of pattern per-formance is required because of high local radio con-gestion. The antennas are supplied with low VSWRfeed, planar radome, tower mount and shroud with RFabsorber.

ULTRA HIGH PERFORMANCE ANTENNASSingle polarized UA seriesDual polarized UDA series

High Cross Polar Discrimination Antennas

UXA series of antennas are based on Ultra HighPerformance Antennas. These antennas offer high sidelobe suppression. In addition UXA antennas offerextremely high cross-polar discrimination. They aretherefore ideally suited for very high capacity systemsutilizing extensive frequency reuse in highly congest-ed environments. This outstanding performance isachieved by use of a special corrugated illuminator, arigid torsion box back structure which ensures thereflector maintains its shape in the field and strictquality control during manufacture.

The cross-polar characteristics for radiation anglesclose to bore sight meet the highest XPD requirementsaccording to EN 300 833 and FCC.

High cross-polar discrimination antennas are availablefor frequencies from 4 GHz to 23 GHz.

ULTRA HIGH PERFORMANCE ANTENNASDual Polarized UXA series

Example of a cross polar contour

Introduction and Antenna Descriptions


Reflectors

Antennas with diame-ters up to 10ft (3.0m)are supplied withreflectors in one piece.Antennas with diame-ters 12ft (3.7m) aresupplied with a twopiece reflector (exceptUXA-types). Antennas with diameters of 15ft (4.6m)are supplied with a 3 piece reflector.

8ft and 10ft antennas are available in 2 pieces option-al for easy transportation.

Colors

Standard color forRFS MicrowaveAntennas is white.Custom colors areavailable uponrequest.

Molded fiberglassradomes are white.High Performance,Ultra HighPerformance andHigh CrossPolarizationDiscrimination

antenna are supplied with planar white radomes.Custom colors are available upon request.

SlimLine and CompactLine Antennas

Radio Frequency Systems recognizes that mobile oper-ators and private microwave users have requirementsfor cost effective solutions for their microwave anten-na systems. These needs include products, which areeasy and quick to install while maintaining good elec-trical performance. In response to these needs RadioFrequency Systems developed the SlimLine andCompactLine series of antennas.

The SlimLine series of antennas utilize a conventionalfeed system and are available in Standard, High andUltra High performance versions. The SlimLine seriesof antennas are available in diameters from 1ft (0.3 m)to 6 ft (1.8 m).

RFS SLIMLINE® ANTENNASSingle polarized Standard SP

Standard, non-pressurized SPFHigh performance SD

Ultra High Performance SUDual Polarized Standard SPX

High performance SDXUltra High Performance SUX

The CompactLine series of antennas use a special feedsystem which results in a reduced shroud length andconsequently a lower profile antenna. These antennasare lighter in weight than standard antennas forreduced tower loading and shipping costs.Furthermore CompactLine antennas up to 2ft (0.6m)diameter are very rugged, with a wind loading ratingof 250 km/h (155mph). Their type designation is SBfor single polarization and SBX for dual polarization.CompactLine antennas are available in 1ft (0.3 m), 2 ft (0.6 m), 3ft (0.9 m) and 4ft (1.2 m) diameters.

RFS COMPACTLINE® ANTENNASSingle polarized Ultra High Performance SBDual Polarized Ultra High Performance SBX

1ft and 2 ft antennas consist of anintegrated reflector/shroud systemavoiding any RF-leakage. This is afurther contribution offering excel-lent radiation performance especial-ly in the back direction.


SBX

CompactLine, dual polarized

SB

CompactLine, single polarized

UXA

Dual polarized, high XPD

UDA, SUX

Dual polarized

UA, SU

Single polarized

ULTRA HIGH PERFORMANCE

DAX, SDX

Dual polarized

DA, SD, SDF

Single polarized

HIGH PERFORMANCE

PSF, SPF

Single polarized, non-pressurized,Spread Spectrum

PAX, SPX

Dual polarized

PA, SPSingle polarizedPALSingle polarized, low VSWR

PADXDual polarized, stan-dard, (FCC part 101, category “A” com-pliant)

PADSingle polarized, stan-dard, (FCC part 101, category “A" com-pliant)

STANDARD PERFORMANCE

Antenna Types, Overview

LA

Lens,single polarized

Technical Data Sheet PA6-W57BC

Solid Microwave Parabolic Antenna, Standard Performance, SinglePolarized, 6 ft

RFS The Clear Choice ™ PA6-W57BC Print Date: 08.08.2006

Please visit us on the internet at http://www.rfsworld.com Radio Frequency Systems

Product Description

RFS Microwave Antennas are designed formicrowave systems in all common frequencyranges from 4 GHz to 40 GHz. Different options ofsurvival windspeeds are available. This allows theuse of antennas in areas where extreme windconditions are normal. The antennas utilise aconventional feed system and are available in threeperformance classes offering complete flexibilitywhen designing a network. Standard Performanceantennas are economical solutions for systemswhere side lobe suppression is of less importance.These antennas are required for use in networkswhere there is a low interference potential.Antennas are available in 2 ft (0.6m) to 15 ft (4.5m)diameters. The Standard Performance antennasare available in dual polarised (PAX) as well as insingle polarised versions (PA and PAL). The PALversion offers a low VSWR value for low echodistortion. Antennas up to 12 ft (3.7m) can beequipped with a moulded radome to reduce windload and to protect the feed against theaccumulation of ice and snow.

Technical FeaturesProduct Type Point to point antennas

Frequency, GHz 5.725 - 6.875

Diameter, ft (m) 6 (1.8)

Profile Standard

Performance Standard

Polarization Single

Regulatory Compliance Standard, EN 300833, FCC

3dB beamwidth, (degrees) 1.9

Antenna Input CPR137G

Low Band Gain, dBi 38.2

Mid Band Gain, dBi 39.0

High Band Gain, dBi 39.8

F/B Ratio, dB 46

XPD, dB 30

1

Technical Data Sheet PA6-W57BC (Cont.)




Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -

ETSI Standard Range 1, class 1

Elevation Adjustment, degrees ± 5

Azimuth Adjustment, degrees ± 5

Polarization Adjustment, degrees ± 5

Pressure, bar (psi) 0.3 (4.3)

Radome Optional

Radome Material Fiberglass

Antenna color white

Mounting Pipe Diameter minimum, mm (in) 114 (4.5)

Mounting Pipe Diameter maximum, mm (in) 114 (4.5)

Minimum Length Pipe, m (ft) 0.6 (2.0)

Approximate Weight, kg (lb) 50 (110) *

Survival Windspeed, kph (mph) 200 (125)

Operational Windspeed, kph (mph) 190 (118)

Fs Side force maximum at 110 kph (68 mph), N (lb) 880 (197)

F a Axial force max. at 110 kph (68 mph), N (lb) 2995 (670)

M Torque maximum at 110 kph (68 mph), N•m (ft lb) 925 (690)

Fs Side force max. at 200 kph (125 mph), N (lb) 2910 (651)

Fa Axial force max. at 200 kph (125 mph), N (lb) 9900 (2217)


NoteFor the A revision antenna, weight is 84kg (185lbs)

2




Please visit us on the internet at http://www.rfsworld.com Radio Frequency Systems3





4

Technical Data Sheet PA8-W57AC


RFS The Clear Choice ™ PA8-W57AC Print Date: 08.08.2006


Product Description





Profile Standard


Polarization Single







F/B Ratio, dB 48

XPD, dB 30

5

Technical Data Sheet PA8-W57AC (Cont.)




Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -






Radome Optional


Antenna color white




Approximate Weight, kg (lb) 120 (264)









6

Technical Data Sheet PA10-W57AC




Product Description





Profile Standard


Polarization Single







F/B Ratio, dB 51

XPD, dB 30

9





Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -






Radome Optional


Antenna color white













10

Technical Data Sheet DA6-W57BC

Solid Microwave Parabolic Antenna, High Performance, SinglePolarized, 6 ft

RFS The Clear Choice ™ DA6-W57BC Print Date: 08.08.2006


Product Description

RFS Microwave Antennas are designed formicrowave systems in all common frequencyranges from 4 GHz to 40 GHz. Different options ofsurvival windspeeds are available. This allows theuse of antennas in areas where extreme windconditions are normal. The antennas utilise aconventional feed system and are available in threeperformance classes offering complete flexibilitywhen designing a network.High Performanceantennas are ideally suited for systems where agood level of side lobe suppression is required.These antennas are required for use in networkswhere there is a high interferencepotential.Antennas are available in 2 ft (0.6m) to 15ft (4.5m) diameters. The High Performanceantennas are available in dual polarised (DAX) aswell as in single polarised versions (DA). Allantennas include a radome which is speciallyshaped (2 ft) or flexible (4 to 15 ft) to minimise itsimpact on the antenna’s electrical characteristics.




Profile Standard

Performance High

Polarization Single







F/B Ratio, dB 64

XPD, dB 30

Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -



13

Technical Data Sheet DA6-W57BC (Cont.)







Radome Included

Antenna color white














14





16

Technical Data Sheet DA8-W57AC


RFS The Clear Choice ™ DA8-W57AC Print Date: 08.08.2006


Product Description





Profile Standard

Performance High

Polarization Single







F/B Ratio, dB 68

XPD, dB 30

Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -




17

Technical Data Sheet DA8-W57AC (Cont.)






Radome Included

Antenna color white













18





20

Technical Data Sheet DA10-W57AC




Product Description





Profile Standard

Performance High

Polarization Single







F/B Ratio, dB 70

XPD, dB 30

Max VSWR / R L, dB 1.15 / 23.1

FCC Standard -



21








Radome Included

Antenna color white













22





24

Technical Data Sheet PAD6-W59BC

Solid Microwave Parabolic Ant, Standard (FCC 101, Cat A) , SinglePolarized, 6 ft

RFS The Clear Choice ™ PAD6-W59BC Print Date: 08.08.2006


Product Description





Profile Standard

Performance Improved Performance

Polarization Single

Regulatory Compliance Standard, FCC






F/B Ratio, dB 55

XPD, dB 30

25

Technical Data Sheet PAD6-W59BC (Cont.)




Max VSWR / R L, dB 1.08 / 28.3

FCC Standard A





Radome Optional


Antenna color white



Minimum Length Pipe, m (ft) 0.6 (2)











26

Technical Data Sheet PAD6-W59BC (Cont.)



Please visit us on the internet at http://www.rfsworld.com Radio Frequency Systems 27

Technical Data Sheet PAD8-W59AC


RFS The Clear Choice ™ PAD8-W59AC Print Date: 08.08.2006


Product Description





Profile Standard


Polarization Single







F/B Ratio, dB 57

XPD, dB 30

29

Technical Data Sheet PAD8-W59AC (Cont.)




Max VSWR / R L, dB 1.08 / 28.3

FCC Standard A





Radome Optional


Antenna color white













30

Technical Data Sheet PAD10-W59AC




Product Description

Standard series antennas are unshrouded and offerstandard and low VSWR models for applicationswhere frequency coordination permits relaxedside-lobe suppression, and where full channelexpansion capability is not required.




Profile Standard


Polarization Single







F/B Ratio, dB 61

XPD, dB 30

33





Max VSWR / R L, dB 1.08 / 28.3

FCC Standard A





Radome Optional


Antenna color white



Minimum Length Pipe, m (ft) 1.52 (5)










34

Technical Data Sheet SU6-59BC

SlimLine Ultra High Performance Antenna, Single Polarized, 6 ft

RFS The Clear Choice ™ SU6-59BC Print Date: 15.08.2006


Product Description

RFS SlimLine® Antennas are designed formicrowave systems in all common frequencyranges from 6 GHz to 40 GHz. The antennas arecost-effective products for microwave point-to-pointtransmission links. The antennas utilise aconventional feed system and are available inStandard, High and Ultra High performanceradiation characteristic. The Ultra High performanceantennas are available in single polarised (SU) aswell as in dual polarised versions (SUX). Antennaswith Ultra High Performance radiationcharacteristics are required for use in networkswhere there is a very high interference potential.Antennas are available in 1 ft (0.3m) to 6 ft (1.8m)diameters. All antennas include a radome which isspecially shaped (1 and 2ft) or flexible (4 and 6 ft) tominimise its impact on the antenna’s electricalcharacteristics. The antennas are easy to install. Aside strut is required only for 6 ft-antennas.




Profile SlimLine

Performance Ultra High

Polarization Single

Regulatory Compliance Standard, EN 300833






F/B Ratio, dB 64

XPD, dB 30

Max VSWR / R L, dB 1.15 / 23.1




37

Technical Data Sheet SU6-59BC (Cont.)






Radome Included

Antenna color white














38

Technical Data Sheet SU6-59BC (Cont.)




Technical Data Sheet DA8-59AC


RFS The Clear Choice ™ DA8-59AC Print Date: 08.08.2006


Product Description





Profile Standard

Performance High

Polarization Single






High Band Gain, dBi 42

F/B Ratio, dB 66

XPD, dB 30

Max VSWR / R L, dB 1.06 / 30.7

FCC Standard A




41

Technical Data Sheet DA8-59AC (Cont.)






Radome Included

Antenna color white













42

Technical Data Sheet DA8-59AC (Cont.)




Technical Data Sheet UA10-59AC

Solid Microwave Parabolic Antenna, Ultra-High Performance,Single Polarized, 10 ft

RFS The Clear Choice ™ UA10-59AC Print Date: 08.08.2006


Product Description

RFS Microwave Antennas are designed formicrowave systems in all common frequencyranges from 2 GHz to 40 GHz. Different options ofsurvival windspeeds are available. This allows theuse of antennas in areas where extreme windconditions are normal. The antennas utilise aconventional feed system and are available in threeperformance classes offering complete flexibilitywhen designing a network. Ultra High Performanceantennas are the optimum choice for systemswhere a high level of pattern performance isrequired because of high local radio congestion.These antennas are required for use in networkswhere there is a very high interference potential.Antennas are available in 1 ft (0.3m) to 15 ft (4.5m)diameters. The Ultra High Performance antennasare available in dual polarised (UDA) as well as insingle polarised versions (UA). All antennas includea radome which is specially shaped (1 and 2 ft) orflexible (4 to 15 ft) to minimise its impact on theantenna’s electrical characteristics.




Profile Standard


Polarization Single




Low Band Gain, dBi 43



F/B Ratio, dB 72

XPD, dB 30

Max VSWR / R L, dB 1.06 / 30.7

FCC Standard A


45

Technical Data Sheet UA10-59AC (Cont.)








Radome Included

Antenna color white













46

Technical Data Sheet UA12-59AC




Product Description

RFS Microwave Antennas are designed formicrowave systems in all common frequencyranges from 2 GHz to 40 GHz. Different options ofsurvival windspeeds are available. This allows theuse of antennas in areas where extreme windconditions are normal. The antennas utilise aconventional feed system and are available in threeperformance classes offering complete flexibilitywhen designing a network. Ultra High Performanceantennas are the optimum choice for systemswhere a high level of pattern performance isrequired because of high local radio congestion.These antennas are required for use in networkswhere there is a very high interference potential.Antennas are available in 1 ft (0.3m) to 15 ft (4.5m)diameters. The Ultra High Performance antennasare available in dual polarised (UDA) as well as insingle polarised versions (UA). All antennas includea radome which is specially shaped (1 and 2 ft) orflexible (4 to 15 ft) to minimise its impact on theantenna’s electrical characteristics.




Profile Standard


Polarization Single







F/B Ratio, dB 74

XPD, dB 30

Max VSWR / R L, dB 1.06 / 30.7

FCC Standard A


49









Radome Included

Antenna color white













50

Technical Data Sheet UXA6-W59BC

Solid Microwave Parabolic Antenna, High Cross PolarDiscrimination, Dual Polarized, 6 ft

RFS The Clear Choice ™ UXA6-W59BC Print Date: 15.08.2006


Product Description

UXA series of antennas are based on dualpolarised Ultra High Performance antennas. Inaddition UXA antennas offer extremely high crosspolar discrimination. High cross polar discriminationantennas are the optimum choice for very highcapacity systems utilizing extensive frequencyreuse in highly congested environments. UXAAntennas are designed for microwave systems inall common frequency ranges from 4 GHz to 23GHz. Different options of survival windspeeds areavailable. This allows the use of antennas in areaswhere extreme wind conditions are normal. Theoutstanding performance is achieved by use of aspecial corrugated illuminator, a rigid torsion boxback structure which ensures the reflectormaintains its shape in the field and strict qualitycontrol during manufacture. Antennas are availablein 2 ft (0.3m) to 15 ft (4.5m) diameters. All antennasinclude a radome which is specially shaped (2 ft) orflexible (4 to 15 ft) to minimise its impact on theantenna’s electrical characteristics.




Profile Standard

Performance Ultra High, High Cross Polar Discrimination

Polarization Dual







F/B Ratio, dB 69

XPD, dB 40

IPI, dB 45

Max VSWR / R L, dB 1.06 / 30.7

FCC Standard A

53

Technical Data Sheet UXA6-W59BC (Cont.)




ETSI Standard Range 1, class 3, XPD





Radome Included

Antenna color white













54

Technical Data Sheet UXA6-W59BC (Cont.)




Technical Data Sheet UXA8-W59AC


RFS The Clear Choice ™ UXA8-W59AC Print Date: 15.08.2006


Product Description





Profile Standard


Polarization Dual







F/B Ratio, dB 71

XPD, dB 40

IPI, dB 45

Max VSWR / R L, dB 1.06 / 30.7

FCC Standard A

57

Technical Data Sheet UXA8-W59AC (Cont.)









Radome Included

Antenna color white













58





Product Description





Profile Standard


Polarization Dual


3dB beamwidth, (degrees) 1





F/B Ratio, dB 73

XPD, dB 40

IPI, dB 45

Max VSWR / R L, dB 1.08 / 28.3


61









Radome Included

Antenna color white













62





Product Description





Profile Standard


Polarization Dual







F/B Ratio, dB 75

XPD, dB 40

IPI, dB 45

Max VSWR / R L, dB 1.08 / 28.3


65









Radome Included

Antenna color white













66

Technical Data Sheet E60

FLEXWELL® Standard Elliptical Waveguide

RFS The Clear Choice ™ E60 Print Date: 08.08.2006


Product Description

FLEXWELL® elliptical waveguide is constructed oflongitudinally continuous seam welded, highlyconductive copper tube, corrugated and precisionformed into an elliptical cross section. It ismanufactured in continuous lengths using a specialseam welding process developed by the RFSorganization.

The corrugation design achieves high transversestability, flexibility and crush strength for superiorhandling and forming at an installation. The inherentstrength and flexibility of FLEXWELL waveguideallows on location, a continuous length ofwaveguide to be run directly from a tower-mountedantenna to the equipment building, eliminatingflange joint discontinuities and the use of bends,twists and flex sections associated with a rigidrectangular waveguide system. Because of itsflexibility, FLEXWELL elliptical waveguide can beeasily transported to an installation site in coils oron reels and then uncoiled as required duringinstallation.

FLEXWELL elliptical waveguide has set an industrystandard for excellent electrical performance. Eachwaveguide has been carefully designed for low lossand low VSWR in specific frequency bands. Foroptimum system performance, there is no substitutefor FLEXWELL waveguide.

As part of the RFS manufacturing process, allelliptical waveguides undergo several differentelectrical tests. Prior to shipping, every length is100% tested again for input VSWR, and undergoesa twenty-four hour pressure test. This additionaltesting is performed to guarantee conformance withpublished specifications and to avoid any problemsin the field.

A FLEXWELL elliptical waveguide feeder requiresless planning and reduces installation costs whencompared to a feeder system using a rigidrectangular waveguide. FLEXWELL waveguide isavailable cut to length with factory attachedconnectors or in continuous lengths for terminationin the field.

Technical Features

69

Technical Data Sheet E60 (Cont.)




Typical Operating Band, GHz 5.6 - 6.425


Dimension over Jacket, mm (in) 56 x 33 (2.2 x 1.3)

Weight, kg/m (lb/ft) 1.1 (0.73)

Minimum Bending Radius E Plane, without rebending,mm (in)

200 (7.9)

Minimum Bending Radius H Plane, without rebending,mm (in)

550 (21.8)

Minimum Bending Radius E Plane, with rebending,mm (in)

300 (11.9)

Minimum Bending Radius H Plane, with rebending,mm (in)

800 (31.6)

Maximum Twist, degree/m (degree/ft) 4 (1.2)

Max. Operating Pressure, bar (psi) 0.5 (7.1)

Max. Pulling Length per Hoisting Grip, m (ft) 100 (305)

Standard Hanger Spacing, m (ft) 0.9 (3)

Recommended Installation Temperature Range, °C(°F)

-40 to +60 (-40 to +140)

Max. VSWR / Return Loss, dB 1.15 / 23.1

Cut-off Frequency, GHz 3.65

NoteVSWR values include connectors and are valid for frequency band of connectors.

Max. Operating Band: 4.50 - 6.425 GHz

70

Technical Data Sheet E65




Product Description

FLEXWELL® elliptical waveguide is constructed oflongitudinally continuous seam welded, highlyconductive copper tube, corrugated and precisionformed into an elliptical cross section. It ismanufactured in continuous lengths using a specialseam welding process developed by the RFSorganization.

The corrugation design achieves high transversestability, flexibility and crush strength for superiorhandling and forming at an installation. The inherentstrength and flexibility of FLEXWELL waveguideallows on location, a continuous length ofwaveguide to be run directly from a tower-mountedantenna to the equipment building, eliminatingflange joint discontinuities and the use of bends,twists and flex sections associated with a rigidrectangular waveguide system. Because of itsflexibility, FLEXWELL elliptical waveguide can beeasily transported to an installation site in coils oron reels and then uncoiled as required duringinstallation.

FLEXWELL elliptical waveguide has set an industrystandard for excellent electrical performance. Eachwaveguide has been carefully designed for low lossand low VSWR in specific frequency bands. Foroptimum system performance, there is no substitutefor FLEXWELL waveguide.

As part of the RFS manufacturing process, allelliptical waveguides undergo several differentelectrical tests. Prior to shipping, every length is100% tested again for input VSWR, and undergoesa twenty-four hour pressure test. This additionaltesting is performed to guarantee conformance withpublished specifications and to avoid any problemsin the field.

A FLEXWELL elliptical waveguide feeder requiresless planning and reduces installation costs whencompared to a feeder system using a rigidrectangular waveguide. FLEXWELL waveguide isavailable cut to length with factory attachedconnectors or in continuous lengths for terminationin the field.

Technical Features

73





Typical Operating Band, GHz 5.9 - 7.125


Dimension over Jacket, mm (in) 51 x 30 (2.0 x 1.2)

Weight, kg/m (lb/ft) 1.0 (0.67)

Minimum Bending Radius E Plane, without rebending,mm (in)

200 (7.9)

Minimum Bending Radius H Plane, without rebending,mm (in)

500 (19.8)

Minimum Bending Radius E Plane, with rebending,mm (in)

300 (11.9)

Minimum Bending Radius H Plane, with rebending,mm (in)

600 (23.7)

Maximum Twist, degree/m (degree/ft) 5 (1.5)

Max. Operating Pressure, bar (psi) 0.5 (7.1)

Max. Pulling Length per Hoisting Grip, m (ft) 100 (305)

Standard Hanger Spacing, m (ft) 0.9 (3)

Recommended Installation Temperature Range, °C(°F)

-40 to +60 (-40 to +140)

Max. VSWR / Return Loss, dB 1.15 / 23.1

Cut-off Frequency, GHz 4.01

NoteVSWR values include connectors and are valid for frequency band of connectors.

Max. Operating Band: 5.00 - 7.125 GHz

74

Technical Data Sheet APD-20

APD-20 Automatic Dehydrator, with LP alarm, 0.2 SCFM, 115V50/60 Hz

RFS The Clear Choice ™ APD-20 Print Date: 08.08.2006


Product Description

The APD-20 series Automatic PressurizationDehydrator is designed for reliable pressurization ofelliptical waveguide, coaxial cable and rigidtransmission line systems. The dehydrator includesa self contained completely automated air dryingsystem that utilizes a pressure swing moistureabsorption cycle to provide pressurized dry air whilecontinuously purging the collected moisture to theatmosphere. This eliminates the need forreplacement or manual reactivation of the desiccantand makes our APD-20 and APD-70 seriesdehydrators ideal for unattended operation at evenremote sites. Dehydrators are also suitable for theaverage manned working environment since theytypically run less than 5% of the time. In mostnormal applications, APD series dehydrators can beexpected to operate for up to five years before anymaintenance activities are required.

The APD-20 is rated at .2 SCFM(.09 liter/sec) and-40°F (-40°C) dry air dew point output at a 95°F(35°C) 95% relative humidity input. For normalroom environments the dehydrator output air has atypical dew point of -55°F (-46°C). System pressureis controlled by the dehydrator pressure switchsettings. Normally, this is factory adjusted to 3 psig(20.7kPa) “on” and 5 psig (34.5 kPa) “off”, but maybe readjusted in the field to operate anywherebetween 2 and 15 psig (13.8 kPa and 103.4 kPa).An internal 40 psig check valve guarantees that thecustomer system stays isolated from thedehydrator’s internal system and prevents loss ofsystem pressure due to leakage in the dehydrator. For additional safety, a standard low pressure alarmswitch factory-set at 1 psig (6.9 kPa), is installed inthe dehydrator. The alarm switch contains a set ofSPST contacts that can be used for both local andremote monitoring or alarming. Additional standardfeatures include a 0-15 psig pressure gauge,indicating power light, and a visual moisture monitorwhich is dark blue when dry and turns pink whenwet.

The units may be shelf mounted or placed in a 19”EIA relay rack. A vented back cover for thedehydrator may be ordered as an optionalaccessory.

Technical Features

77

Technical Data Sheet APD-20 (Cont.)

APD-20 Automatic Dehydrator, with LP alarm, 0.2 SCFM, 115V50/60 Hz

RFS The Clear Choice ™ APD-20 Print Date: 08.08.2006


Product Dehydrator

Dehydrator Type Automatic

System Capacity Standard

Operating Voltage 115V 50/60 Hz

60 Hz Output Capacity, liters/sec (SCFM) 0.09 (0.2)

50 Hz Output Capacity, liters/sec (SCFM) 0.08 (0.17)

Output Dew Point -40°C (-40°F)

Ambient Inlet Temperature, °C (°F) 1 - 49 (33 -120)

Ambient Humidity % maximum 95

Factory Set Output Pressure (on/off), kPa (psig) 20.7-34.5 (3/5)

Field Adjustable Output Pressure (on/off), kPa (psig) 13.8-103.4 (2-15)

Output Differential Output Pressure (on/off), kPa(psig)

13.8 (2) minimum

Compressor Rating 1/12 hp

Pumping Power Consumption 350 watts

Idle Power Consumption, Watts 10

Low Pressure Alarm Factory set for 1 psig. (P/N 916814-001) 0.5psig differential.

Output Fitting 1/8" FPT to 3/8" plastic tube fitting

Dimensions, H x W x D, mm (in) 355 x 450 x 203 (14 x 17-11/16 x 8)

Net Weight, kg (lb) 22 (47)

78

aws microwave antenna system relocation kit

Documents