audit of export oriented unit at ameya management consultancy by deepak kulkarni

8/6/2019 Audit of Export Oriented Unit at Ameya Management Consultancy by Deepak Kulkarni

1/42

1

Basilal Ramnath Agarwal charitable trusts

Vishwkarma institute of Management

A

Project ReportOn

Audit of Export Oriented Unit

For Ameya Management Consultancy Pvt. Ltd.

Submitted to:

In partial fulfillment of 2 years full time M.B.A. Course.

Submitted By:Deepak Kulkarni

VIM, Pune.

(2005-07)

www.final-yearprojects.co.cc | www.troubleshoot4free.com/fyp/


2/42

2

Acknowledgement

Before writing the actual report on summer training I wish very thankful to

Ameya Management Consultancy Pvt. Ltd. , who gave me a chance to make a

project.

A special thanks to Mr. Rajesh khadilkar sir, the director of Ameya

management consultancy Pvt ltd., who showed me the path of the project.

I also wish thanks to Mr. Kaushal Mundada, C.A. who gave proper

knowledge of auditing of EOU s. I also wish thanks to Mr. shrikant

Charegaonkar, who helped for this project.

I am very much thankful to Mrs.Smita Sovani, who showed me exact

direction of project & making of a report.

Deepak Kulkarni(MBA II)



3/42

3

This is to certify that Mr. Deepak Kulkarni is

bonafide student of our institute. He has successfully

completed his summer project titled, Audit of Export

oriented Unit in partial fulfillment of MBA programmed

2005-2007 as per rule of Pune University.

Director Project guide



4/42

4

Title Index

Sr. No. Title Pg.No.

Remark

1. Executive summary 4-6

2. Scope 7.1

3. Objective 7.2

4. Company Profile 8-16

5. Theoretical Background 17-21

6. Benefits of EOU 22-28

7. Information and formats ofdocuments

29-39

8. Conclusion 40

9. Bibliography 41



5/42

5

Executive Summary

Introduction:

Ameya Management Consultancy Pvt. Ltd. is well known

consultancy in Pune. It deals with excise, customs, service taxes etc.

Mr. Rajendra khadilkar is the director of a company & a very helping nature

person. The firm gives services to various companies.

I think it was a good experience to work with Mr. khadilkar and he

gave me full information about Export oriented unit.

About my work in summer training.

Project title:

The company deals with custom audit. I got a chance to

work as a trainee in well-known GME Pvt. ltd, which is registered under this

firm. So, my project title is Audit of EOU s and the documents maintained by

company.



6/42

6

Why:

The area of exporting unit is becoming wider day-by-day. Customs audit

consists of the export oriented unit s audit. Working with custom and get

knowledge about Export-oriented units was a nice experience for me.

So, I feel very glad and very satisfied to work with Ameya

management consultancy Pvt ltd.

Location:

Ameya Management consultancy

Located at,

514, 5th floor, siddharth towers,

Near city pride theatres

Off karve road, kothrud,

Pune 411029

& Gadre marine export ltd. was located at,

Ratnagiri MIDC,



7/42

7

Dist. Ratnagiri.

Duration:

The period for the training was for the month of June and July. The

audit of Export oriented unit was done during this period so I got chance with

Ameya Management Consultancy PVT LTD to work on EOUs.

Result:

Two months experience in the field of export was very nice for

me. In these two months I get much knowledge of implementation of EOU and

the various documents maintained for the unit. Because of lack of time I cant

get full information about the unit but whichever information I can try to get

I had explained it in this report.



8/42

8

Scope And Objective

Project title: Audit of EOU s

Scope: (7.1)

The learning project of Audit of Export oriented units consists of

The study of the documents maintained by the company. I examined various

Types of documents maintained by the company. Due to lack of time I cant get

thorough knowledge of documents maintained by the EOU scheme. But few

Of them I had mentioned with the format and related information which I get

during the working. The study involved verification of records and checking

of various documents.

Objective (7.2)

The primary objective of this learning project was to get a

Knowledge of export-oriented unit and the documents maintained for

Implementation of EOU scheme. Also it consists the audit of EOU and gets much

Knowledge of verification of documents maintained by the EOU scheme.



9/42

9

Company Profile

Company history:

The details of company are as follows.

R.M.Kh a d ilk a r s

Ameya Management Consultancy Pvt. Limited

514, 5TH Floor, Siddharth Towers,

Near City-Pride theatres,

Off Karve Road, Kothrud,

Pune 411 029

Phone: 25467155, Mobile: 98226 13856

E-Mail Address: [email protected]

[email protected]

Services offered:

1) Management & taxation Consultancy in Indirect Taxation in India.

2) Systems [ERP like SAP, ORACLE ETC.] development &management,

3) Computerization of Financial, materials and related records

4) Realization of exports benefits

5) Liaison with offices of Director General Foreign Trade, Customs, Software Technology

Parks of India, Development Commissioner [SEEPZ, Mumbai.



10/42

10

6) In-House awareness/Training Programsin Indirect as well as Direct Taxation in India.

7) Identification of resource organizations and tie up with them in the areas of logistics,

warehouse management, infrastructure providers.

Note:The Organization is aided and headed by professionals having versatile working

experience in the capacity of head of the departments like Excise, Commercial & Stores in

major Indian Corporate and MNCs for last fifteen years. This includes areas like compliance

to Central Excise & Service Taxlaw, systems, dispatches and materials management.

The organization at present is engaged in soliciting advises to various manufacturing MNCs,

Industries in organized Sector and Infra-structureprojects in respect of Central Excise,

Customs & Service Tax laws. It also helps to the corporate sector for conducting in-house

training programsfor their employees so as to upgrade their skills in these laws.

The organization also provides aid for developing a system, system audit, up

gradation of the system and verification of records to ensure the statutory compliance

required under various provisions of the said fiscal laws i. e. Central Excise, Customs &

Service Tax.

The organization also provides consultation in replying to the queries raised by the

Government Departments. It also provides support and assistance in legal disputes before

quasi-judicial and judicial authorities up to the Apex court in India

Consultancy:

The company provides different types of consultancy. These consultancies

Are listed as follows.



11/42


12/42

12

duties of Excise & Cess. The confusion further gets compounded by an astonishing number

of amendments brought about by various Notifications that are issued each year.

The penal provisions like penalty equal to the duty, Interest @ 13% P. A. on the duty sought

to be evaded etc. make it obligatory on the part of the manufacturer to keep a cautious

approach to the said act. EOUs registered with Excise Department and related services such

as procurement of CT3s from Department, Bonding & de-bonding, Rewarehousing

Certificates, DTA Sale Permissions, Job-Work permissions, etc.

The consultancy provide advice to the manufacturer so as to enable him to discharge

the correct duty liability to avoid litigations in future. We also extend help in defending the

case at the appropriate levels such as Commissioners (Appeals), Customs Excise Service

Tax Appellate Tribunal (CESTAT). We also extend help in preparing periodic returns,

Verification of records maintained by the manufacturer and Excise Audits in line with

EA 2000.

Service Tax:

The Finance Act, 1994, introduced the said Tax for first time in the year 1994. At

present more than 90 Services, which have been brought under the tax net. It is expected

that in forthcoming years some more services also will be brought so as to compensate the

revenue loss, which Government is likely to incur due to rationalization of rates in Customs

and Central Excise. The Tax is on the activity of providing specified services and the service

provider is liable to pay the tax the periodic returns are required to be filed.

The consultancies provide help to fulfill all the procedural requirements and also

discharge correct tax liability. We also provide service to contest the Notices to Show Cause



13/42

13

at various Appellate forums. Recently Government had introduced intra-sectoral Credit. This

is very important as far as industry.

The consultancy give adequate support to develop, understand the new terminology

and train staff, officers to work accordingly. Now the Excise & service tax is to be seen as

profit center and we take proper initiative to guide industry to keep age.

In-House awareness/Training Programs:

Since the policy of the Central Government is to bring broad base reasonable

taxation in the field of Direct as well as Indirect Taxes, many changes are brought in

particularly in the field of Central Excise Law. The Objective of these changes is to simplify

the procedures required to be followed by the manufacturer. It is our experience that many

number of times the execution department like materials, stores marketing etc. commit

number of mistakes unconsciously due to lack of awareness/Updating about the changed

procedure provided in the law. The said mistake therefore results in to litigations and penal

actions on the organization. To avoid these mistakes arranging regular awareness programs

within the organization immensely help the company to prevent such type of mistakes. We

provide such in-house awareness programs wherein the procedures required to be followed

are explained in simple laymans language. After the awareness it was experienced that

employees brings out many practical difficulties they face in their day-to-day working. The

solution to these difficulties also helps to the organization

to make necessary modifications in its internal control system. In majority of cases it is

experienced that 90% of the procedural lapses gets automatically solved and litigations gets

reduced. The confidence of the employee s increases and overall working becomes smooth.



14/42

14

It is advisable to arrange this type of programs at least two times a year to enable the

staff members to keep them selves up-to-date on the recent changes. These programs are

generally conducted in the field of Customs, Excise & Service Tax.

System Audit:

Since 1986 the Central Excise Law can be looked as one of the effective tools for

the purpose of increasing the competitiveness, profitability of the organization. The resent

approach of the Government and the simplification major implemented in law suggest on line

proper system of accounting of a transaction from its inception to the closure. Slowly the

statutory records, which were required to be maintained under various laws stands,

abolished and private records maintained by the organization are replacing the same. The

manufacturer is now law bound declare his private records maintained by him in respect of

purchases, receipt of material, storage of material, issue of material, accounting of finished

goods and removal thereof. He is also required to give the complete details, audit trails in

case the records are maintained on computers. In short the complete details are now to be

declared to the Excise Authorities. The Excise Authorities on the basis of these declarations

is likely to conduct the audits of the company. It is therefore advisable to monitor the system

periodically so as to make it completely foolproof. It is also necessary that periodic

reconciliation if any of the various returns filed under various laws is done. Company

Organization extends help in this area too. The verification of various private records in

maintained in connection with Central Excise Law. The method of excise audit is undergoing

radical changes.



15/42

15

The old system of internal audit now being stands replaced by a new system

called Excise Audit 2000 (EA 2000). The said system at present is introduced to certain

category of industries and slowly will be implemented to all manufacturing units. The said

system not only insures a complete transparency but also encourages voluntary compliance.

The departmental audit parties are expected to visit the organization with advance intimation.

The higher officers of the rank of Additional Commissioner are expected to personally

supervise the audit and he may discuss the audit observation with the senior management

Staff of the organization. Such voluntary compliance will also be appreciated by the

department and the audit it self will be smooth.

Software Technology Park Units/ EOU s:

In this area company provide services

like obtainment of Customs license under Section 56 of the Customs Act, 1962 for in bond

manufacturing, execution of Bond, obtainment of CT-3 certificates/ Procurement

certificates for duty free procurement. Re-warehousing certificates, permission for material to

be send for job work etc. De-bonding of goods, shifting from one premise to another

premises (i.e. in bond movement).

Audit & verification of compliance with Bond Register & B-17 Bond

Register verification & guidance.



16/42

16

The valued clients list of the company:

The consultancy have more than 75 manufacturing

companies, taxable service providers and infrastructure providers.

Few illustrious of them are. Here I mentioned few of the names.

1. Cummins India Limited2. Cummins Diesel Sales & Service (India) Limited3. Nelson Engine Systems India Limited4. Lucas TVS Limited5. HSBC Software Development India6. Praj Industries Limited7. Honeywell Turbo Atomization India Limited8. Honeywell Turbo India

9. Husco Hydraulics Pvt. Limited10. Spicer India Limited11. Gabriel India Limited12. Coro Colour India Limited13. Siro Plast Limited14. Mahindra Automotive Steels Limited15. Mojj Engineering Systems Limited16. V Cube Forge India Limited17. Disha Technologies India Limited18. Die-Aluminum India Limited19. Durabuild Techniques India Limited

20. Ghatge Patil Transports Limited21. Reinshaw Metallurgy Techniques India Limited22. Magarpatta Township Development Co. Limited23. Vascon Engineers Limited24. Paranjpee Schemes Limited25. KTR Couplings Limited26. Mahle Filtration Systems India Limited27. PMT Machines Limited28. Precision Automation and Robotics India Limited29. Seinumero Engineering India Limited30. Seinumero Machine Tools Limited

31. Soma Textiles & Industries Limited32. Spintex Industries Limited33. Starion India Limited34. Fleetguard Filters Pvt. Limited35. Abhi Natural Products Pvt. Limited36. Anand Technology Resource Parts {Anand Group]37. Accurate gauges & Tools Pvt. Limited38. Ambika Waste Management Pvt. Limited



17/42

17

Client list continued

39. Arklite Specialty Lamps Limited40. Accurate Sales & Services41. Alfa Industries & Batteries

42. Am-tech Engineering43. Aura Electronics Pvt. Limited44. Autobat Battries Pvt. Limited45. SpaceSaver Exports Pvt. Limited46. Armar Industries47. Amruta Enterprises48. Atul Enterprises49. Chatham Thermostat Pvt. Limited50. Classic Strips India Pvt. Limited51. Dhruvi Flexipack Pvt. Limited52. Dispotronics

53. Enginetech Systems Pvt. Limited54. Filtrum Tools Pvt. Limited55. Filtrum Paper Products Limited56. Glotech Mold India Pvt. Limited57. Gadre Marine Exports Pvt. Limited58. Hodak Engineering Pvt. Limited59. Hardik Founders & Engineers Pvt. Limited60. ID Technologies61. JD Panse & Co62. JIS Tools Company63. Magarpatta Resort & motels Pvt. Limited64. Magarpatta Property Management Co. Limited

65. Microversa Automisation Pvt. Limited66. Marigold Premises Pvt. Limited67. Pawas Canning68. Prasanna Tours & Travels Pvt. Limited69. Premier Engineering Company70. Power Control

These all includes the company profile.



18/42

18

Theoretical Background

Introduction to Export Oriented Unit scheme:

The EOU scheme was introduced in the year 1980 vide Ministry of Commerce resolution

dated 31st December 1980. The purpose of the scheme was basically to boost exports by

creating additional production capacity. It was introduced as a complementary scheme to the

Free Trade Zones/ Export Processing Zone (EPZ) Scheme introduced in the sixties which

had not attracted many units due to location restrictions. The exporters showed willingness to

set up units with long term commitment to exports under Customs bond operations provided

they had the freedom to locate them in places of their choice and given most of the benefits

as provided to units set up in the Zones.

Over the years the Scheme has undergone various changes and its scope also expanded

substantially as compared to the initial Scheme, which was basically for manufacturing sector

with certain minimum value addition in terms of export earnings. The EOU scheme is, at

present, governed by the provisions of Chapter 6 of the Export and Import (EXIM) Policy,

2004-2009 and Chapter 6 of the Handbook of Procedures, Volume-I (HOP). Under this

scheme, the units undertaking to export their entire production of goods are allowed to be set

up. These units may be engaged in the manufacture, services, development of software,

trading, repair, remaking, reconditioning, re-engineering including making of

gold/silver/platinum jewellery and articles thereof, agriculture including agro-processing,

aquaculture, animal husbandry, bio-technology, floriculture, horticulture, pisiculture,

viticulture, poultry, sericulture and granites. The EOUs can export all products except

prohibited items of exports in ITC (HS).

Under the EOU scheme, the units are allowed to import or procure locally without payment of

duty all types of goods including capital goods, raw materials, components, packing

materials, consumables, spares and various other specified categories of equipments



19/42

19

including material handling equipments, required for export production or in connection

therewith. Even the goods appearing in the restricted list of the EXIM Policy (2005-2009) are

permitted to be imported. However, the goods prohibited for import are not permitted. In the

case of EOUs engaged in agriculture, animal husbandry, floriculture, horticulture, pisiculture,

viticulture, poultry, sericulture and granite quarrying, only specified categories of goods

mentioned in the relevant notification have been permitted to be imported duty-free.

The Customs exemption notifications for import & related Central Excise exemption

notification when the goods are procured from local manufacturing units, prescribe several

conditions to be fulfilled by the beneficiaries keeping in view the objective of the Scheme and

to prevent abuse. Working in Customs Bond is one of the essential prerequisite-there being

few exceptions. They also provide various flexibilities in the matter of taking out the materialsfor job work, inter unit transfer. The EOUs are required to achieve the minimum NFEP (Net

Foreign Exchange Earning as a Percentage of Exports) and the minimum EP (Export

Performance) as per the provisions of EXIM Policy.

The EOUs are licensed to manufacture goods within the bonded premises for the purpose of

export. As per the policy, the period of bonding is initially for five years, which is extendable

to another five years by the Development Commissioner. On completion of the bonding

period, it is for the unit to decide whether to continue under, or to opt out, of the scheme. The

imported capital goods are allowed to be warehoused for a period of 5 years. For other

goods, the warehousing period is one year, which can be extended further by the

Commissioner / Chief Commissioner of Customs. On an application being made by the unit,

extension of the time limit is granted in all cases unless there is malafide and diversion of

duty free materials. As on 31-3-2001, there are more than 1500 EOUs functioning in the

country.

Monitoring and Administrative Control:

The EOUs basically function under the administrative control of the Development

Commissioner of the Export Processing Zones, whose jurisdiction has been notified by the

Ministry of Commerce. In all, there are seven Development Commissioners at Mumbai,



20/42

20

Gandhi ham, Chennai, Cochin, Vizag, Noida and Calcutta, who supervise the functioning of

the EOUs and eight Export Processing Zones/Special Economic Zones in the country. The

Development Commissioners of the EPZs/SEZs are the Licensing Authorities in respect of

units under the EOU Scheme, as per specified territorial jurisdiction as indicated in the Export

and Import Policy.

The provisions of the Customs and Central Excise law in respect of the EOUs are

administered by the Commissioners of Customs and Central Excise, who work under the

control of Central Board of Excise & Customs. The staff of jurisdictional Commissioner of

Central Excise handles the work relating to EOUs. However, in the case of EOUs located in

port cities/towns or within the municipal limits of port cities/towns, jurisdictional Commissioner

of Customs, Seaport, handles the work. (Reference Boards Circular Nos. 72/2000-Cus,dated 31-8-2000 and 87/2000-Cus, dated 2-11-2000.)

For setting up of an EOU, three copies of the application in the prescribed form are required

to be submitted to the Development Commissioner. In certain cases, approval of the Board of

Approval (BOA) is required. Applications for setting up of Electronic Hardware Technology

Park/Software Technology Park units are submitted to the officer designated by the Ministry

of Information Technology for this purpose. After approval of the application and issuance of

Letter of Permission, the applicant is required to execute a legal undertaking with the

Development Commissioner/Designated Officer concerned within the prescribed time period.

On execution of legal undertaking, a green card is issued to the unit.

On the policy front, all decisions relating to the EOUs are taken by the Board of Approvals

(BOA), set up under the Ministry of Commerce. The BOA is chaired by the Secretary,

Ministry of Commerce and includes the Chairman, C.B.E.C. or his nominee as a member. In

the case of units engaged in manufacture of electronic hardware and software, the policy

decisions are taken by the Inter Ministerial Standing Committee (IMSC) set up under the

Ministry of Information Technology and the same are implemented through its Designated

Officers. Chairman, C.B.E.C. or his nominee is a member of the IMSC. The availability of any

benefit under Customs or Central Excise Acts or the notifications issued there under has,

however, to be determined by the Commissioner of Customs or Central Excise having



21/42

21

jurisdiction-guided by CBEC in areas of doubt. Appropriate inter Ministerial liaison is

maintained for ensuring uniformity as far as possible in the Exam Policy provisions and the

provisions built in the relevant Customs & Central Excise notifications.

Customs Bonding of EOUs:

The premises of EOU are approved as a Customs bonded warehouse under the

warehousing provisions of the Customs Act. The manufacturing and other operations are

carried out under customs bond and the unit bearing appropriate charges for officers on cost

recovery basis. In case of units in Aquaculture, Horticulture, Floriculture, Granite quarrying

etc exemption from bonding is given for administrative reasons with certain other safeguards

being put in place to check that duty free benefits where availed are not abused. The EOUs

are required to execute a multipurpose bond with surety/ security with jurisdictional Customs/

Central Excise officers. (Reference Boards Circular No. 15/95-Cus, dated 23-2-1995)

Customs and Central Excise Notifications relating to EOU Scheme:

To enable EOUs to import / procure locally their requirement of raw materials, capital goods

and office equipment etc. duty free, a number of Customs and Central Excise notifications

have been issued by the Ministry of Finance. These notifications specify the different

categories of items allowed to be imported / procured duty free as well as the conditions

thereof.

General Conditions of Duty free Import:

The facility of duty free import (extending exemption both from basic & countervailing duty) is

subject to certain general conditions in accordance with the EXIM Policy and these are

summed up as follows:



22/42

22

(i)

The goods are required to be imported into the EOU premises directly. However,

Granite Quarrying units, agriculture and allied sector units are allowed to supply

/transfer the capital goods and the inputs in the farms/fields with prior permission of

Customs.

(ii) Prior to undertaking import / local procurement duty free, the unit is required to get their

premises customs bonded. The unit is also required to execute a B-17 bond with surety/

security with jurisdictional Customs/ Central Excise officers and take out a license under

section 58 of the Customs Act, 1962.

(iii) The goods, except capital goods and spares, are required to be utilized within a period

of one year or within such period as may be extended by the Customs authorities.

(iv) The importer is required to maintain a proper account of the import, consumption and

utilization of all imported/locally procured materials and exports made and submit them

periodically to the Development Commissioner/ Customs.

(v) The importer is required to achieve minimum NFEP/export performance as per the

provisions of EXIM Policy.

(vi) The importer is required to abide by the terms and conditions of the Letter of

Permission/Letter of Intent /Industrial License issued to the unit.

However, the sector specific customs / excise duty exemption notification(s) have certain

additional conditions, which are also required to be followed by the units.



23/42

23

Benefits of Export Oriented Unit:

Export Oriented units [STP s] are brought under the scheme as EOU scheme

on 31.12.1980. Now the provisions under Chapter 6 of Foreign Trade Policy,

2004-2009, govern EOU Scheme. Under EOU scheme various benefits are

available to industries who intent to avail this benefit under this scheme. The

major benefits can be summarized as under.

1. Unit may export all kinds of goods, which are manufactured by unit and services. This

also includes STPs & EHTPs

2. Machines, Machinery Equipment, tools and dies etc. can also procured either

imported or indigenous with out payment of duty.

3. Raw material components require for manufactured of final product can also be

procured without payment of customs and excise duty.

4. Income tax holiday (Exemptions from payment of income tax as per sec 10 A and 10B

of income Tax Act).

5. Exemption from Industrial Licensing for manufacture of item for SSI sector.

6. Unit is allowed to retain 100% of its export earning in EEFC Account.

7. Transfer of Manufactured goods from one EOU to another EOU is permitted.

8. EOU unit can send the goods for job-work out side its premises.

9. Unit can clear 50% of its FOB value of Exports to DTA on consessional rate Subject to

positive net foreign exchange.

10. Clearance From EOU to another EOU or to Holder of Advance license or EPCG

license holder will be considered positive foreign exchange earning.

11. Minimum Investment in plant and machinery for EOU unit is fixed as Rs 1 Crore.

Important aspects, which are to be noted:

1. The Accounts are to be maintained in proper manner.

2. The transfer pricing issue is to be settled if the software is exported to parent unit or

sister concerned abroad.



24/42

24

3. The procedures are required to be followed by the unit.

EOU units are totally controlled by customs authorities and various documentation and

procedures are required to be followed by the unit, which is rigid, and join need to follow the

same as per provision of law. Following are the major procedure, which is required to be

followed by EOU either on day-to-day basis, or it is followed periodically & aspects which

needs to be followed by EOU/STP/EHTP.

1. EOU Unit is required to submit a project report along with Application in prescribed

format to Approval Committee [Development Commissioner]

2. The Board of Approval considering various aspects either approves or rejects the

application.

3. If Application is accepted for setting up an unit, a letter of permission [LOP/LOI] is

allotted.

4. Unit needs to obtain permission from local customs authorities and get registered as

bonded warehouse.

5. Unit needs to furnish B-17 Bond with the Customs authorities along with Bank

guarantee considering procurement plans.6. The Customs authorities control each Procurement. For local procurement a CT 3 is

required to be obtained duty endorsed by Sector In charge superintendent, in case of

procurement of imported raw-material/components or cap goods, a procurement

certificate duly endorsed by Superintendent of Central Excise

7. Each consignment which was brought under consessional rate/exemption is required

to be endorsed by customs officer.

8. Exports are to be verified and documents are required to be endorsed by customs

officers.

9. Monthly ER 2 return is required to be submitted to Excise Authorities.

10. Unit is required to submit Quarterly & Yearly return to Development Commissioner.

11. Unit is required to maintain details of receipt, issue, consumption and utilization of the

raw material purchased.



25/42

25

12. The Accounts are to be maintained in proper manner.

13. The transfer pricing issue is to be settled if the software is exported to parent unit or

sister concerned abroad.

14. The procedures are required to be followed by the unit.

In all under EOU scheme various facilities and concessions are provided to industry. It is

very important that the unit must follow the procedures and maintain stocks of raw-

material and finished goods on day-to-day basis. The unit is controlled by the Customs

department and required to be follow all the procedures. If the unit intent to export

majority of its production, it is advised to go ahead with this scheme.

The unit need to co-ordination with customs department and Development commissioner

on day-to-day basis for application for CT3/Procurement Certificate, obtain the same,

verification of the consignments, endorsement on Bill of Entry or AR3/AR3A etc.

Verification of export consignments and endorsement on Export documents, submission

of various declarations, returns etc.

Import and Export Procedure:

With regard to clearance of import cargo, the EOUs are placed in a special category,

eligible for fast track or green channel clearance through the Customs. Clearance of import

consignments is allowed at the gateway port/ Air cargo Complexes on the strength of

procurement certificate issued to the EOU by the jurisdictional Assistant

Commissioner/Deputy Commissioner. In general, the EOU cargo is not examined at thegateway port. In case of loose cargo, marks & numbers on the packages are verified. As for

sealed containers, the seal number and container number are verified with the Bill of Lading.

If the seal is found intact, the container is allowed clearance. The imported cargo so cleared

and brought into the unit s premises are examined by the jurisdictional Customs/Central

Excise officials. After examination (percentage check only), the goods are allowed to be used



26/42

26

for export production. Re-warehousing certificate is to be submitted to the Assistant

Commissioner/Deputy Commissioner in charge of the port of import within 90 days of the

issue of procurement certificate.

On the export side, the units having status of a Super Star Trading House, Star

Trading House, Trading House, and Export House are allowed the facility of self-sealing of

their export containers. (Board s Circular Nos. 63/97-Cus, dated 21-11-1997, 14/98-Cus

dated 10-3-98 and 90/98-Cus, dated 8-12-1998.)

Procurement of Goods Indigenously under CT-3 Procedure:

The EOUs can procure goods from DTA without payment of Central Excise duty subject

to following of the Chapter X procedure of erstwhile Central Excise Rules, 1944. Such

procurement from DTA is against CT-3, which is issued by the Superintendent of

Customs/Central Excise in charge of the EOU. Such goods are required to be brought

directly from the manufacturer /warehouse into the unit's premises under AR3A and

examined by the designated officer. After examination of such goods, one copy of AR-3A is

sent by registered post to the jurisdictional Central Excise authorities as a Re-warehousing

Certificate in token of receipt of the goods in the unit. To avoid separate permission every

time, the EOUs are issued pre-authenticated CT-3 in booklet form and against such pre-

authenticated CT-3, the EOUs are allowed to procure capital goods, raw materials,

consumables etc. Goods procured from DTA and found to be defective can be returned to

the manufacturer under Chapter X procedure of erstwhile Central Excise Rules, 1944.



27/42

27

DTA sale:

The EOUs ( other than gems & jewellery units) are allowed to sell goods (including

rejects and byproducts) manufactured by them in DTA upto 50% of FOB value of exports on

payment of consessional duty subject to achievement of prescribed NFEP.

However, the DTA sale facility is not available for certain products such as motor car,

alcoholic liquor, tea (except instant tea), books etc. The EOUs are allowed to remove the

goods into DTA on a invoice. The invoice is used both as a transport document and also as a

document for determining the assessable value. The EOUs can pay the duty by depositing

the same in an authorized bank or the duty can also be debited from the Personal Ledger

Account if an account current is maintained.

Goods Manufactured from Indigenous Materials in 100% EOUs

A consessional duty has been prescribed for goods sold in DTA which are manufactured

entirely out of indigenous materials. In such cases, the duty charged is the effective rate

of excise duty, which is livable on like goods manufactured & cleared by DTA units.

(Reference: notification No.8/97-CE dated 1-3-97). However, if such goods manufacturedby a DTA unit are fully exempt from excise duty or are chargeable to nil rate of duty, the

EOUs are required to pay 30% of each of duties of customs livable on similar imported

goods. (Reference: Notification No.13/98-CE dated 2-6-98).

Clearance of Byproducts, Rejects, Waste and Scrap, Non-excisable Goods, etc.:

The DTA clearance of by-products and rejects on consessional rate duty is not allowed to

the EOUs, which have failed to achieve the prescribed NFEP. In such cases, the EOUs are

liable to pay full duty. Further, in case of these units, DTA clearance of finished goods is not

allowed even on payment of full duty. In case of waste/scrap/remnants, the same are allowed

to be sold in DTA on payment of consessional rate of duty within overall limit of 50% of FOB



28/42

28

value of exports without insisting on achievement of prescribed NFEP. In case of sale of

scrap/waste/remnants beyond this limit, it is allowed on payment of full duty. As for DTA

clearance of goods manufactured by the EOUs, which are not excisable (e.g. cut flowers).

The duty on inputs and consumables etc. procured/imported duty free under exemption

notifications, which have gone into production of such non-excisable goods cleared into DTA,

is recovered.

De-Bonding:

An EOU may debond into a normal DTA unit subject to the approval of the Development

Commissioner and following of prescribed procedure & fulfilling the laid down conditions.

Such de-bonding is subject to penalty, if any, that may be imposed and payment of duties ofcustoms and excise applicable at the time of de-bonding. The standard conditions of de-

bonding, as indicated in the Handbook of Procedures provide, amongst other conditions, that

the applicable customs and central excise duty would be paid on imported and indigenous

capital goods, finished goods, raw materials, consumables, components etc. in stock.

Further, the unit in question continues to be treated as an EOU till the date of final de-

bonding order.

The duty payable in terms of the relevant notifications by the units seeking debonding is as

under:

(a)

Semi-finished and finished goods lying in stock at the time of de-bonding can be

cleared on payment of the excise duty equal to aggregate duties of Customs payable

on similar imported goods.

(b)

Capital goods, material handling equipment, office equipment and captive power plants

can be cleared on payment of an amount equal to the customs duty leviable on such

goods on the depreciated value thereof and at the rates in force on the date of

payment of such duty.

(c)Goods including containers suitable for repeated use other than those at (b) above can

be allowed clearance on payment of customs duty on their value at the time of import



29/42

29

and at the rate of duty in force on the date of payment of such duty.

(d)Used packing materials such as cardboard boxes, polyethylene bags of a kind

unsuitable for repeated use can be cleared without payment of duty.

At the time of debonding, the EOUs are entitled for depreciation on imported/indigenous

capital goods. The rate of depreciation on capital goods have been specified and in case of

the computers and computer peripherals, accelerated rate of depreciation have been

provided for.

In the event of a gem and jewellery unit ceasing its operation, gold and other specious

metals, alloys, gem and other materials available for manufacture of jewellery are handed

over to a nominated agency (nominated by Department of Commerce) at a price determined

by that agency.

After studying this all information about EOUs. I examined various types of

documents maintained by the company. Due to lack of time I cant get thorough

knowledge of documents maintained by the EOU scheme. , but few of them I had

mentioned with the format and related information which I get during the working.



30/42

30

Various Documents maintained by the company:

The study of document maintained by Gadre marine Export Ltd. is as follows.

These all documents are only related to customs audit. Due to lack of time, whatever

information I could get I had tried to obtain it.

1. Commercial Invoice:

The format of commercial Invoice is as follows:

Name: Gade marine Export Pvt. ltd. Invoice No. & Date

Consignee: Buyers Order No.

Ref:

Country of origin Country of Destination

INDIA JAPAN

Container

No.

No. Of

kinds ofPackage

Description

of Goods

Quantity Rate Amount

(Rs.)

Authorized signature

The commercial invoice register is maintained separately. The invoice amount tallied with

the amount of ARE-1. Here the rate is determined as per the grade of the product.

The product was fish paste, which was the raw material for the Gadre Marine Export

ltd.



31/42

31

2.Format of Letter of Permission For EOU s Developer.

No.

Government Of India

Ministry of commerce and industry

Department of Commerce

(EOU section)Dated:

To,Subject: Proposal For setting up of Export Oriented Unit at

Sir,The under designed is directed to refer of your proposal for setting up of EOU

At ______________ and to convey the approval of the government of India to your proposal,

the details of which are noted below.

General Conditions:

1. At least 25% of the SEZ s area shall be used for developing industrial area for settingup of EOU s.

2. It would be the responsibility of the developer to obtain required approval from various

statutory authorities under relevant statues and regulation of the government of India

and the state government.

3. The developer will make adequate provision for rehabilitation of the displaced person.

4. The developer shall be eligible for duty free import/ domestic procurement of goods only

for those activities approved by BOA

5. The state government shall issue requisite notification giving effect to the policy

announced by the state government and shall enact a SEZ act.

6. The project shall implemented and operated in terms of the parameters laid down by this

ministry



32/42

32

7. The funds required for the project will be fully raised by developer, the external

borrowings will be as per the ministry of finance.

8. The promoters shall maintain adequate manpower to provide the facility

9. The operation and maintenance of the unit shall be undertaken as per the proposal.

10.The approval will be subject to cancellation in case of defective service ar if the service

is not up to minimum standard specification.

Kindly convey your acceptance of all the terms and conditions indicated above within 30 days

from the date of issue of this letter.

Yours faithfully

Director

Thus, it is important document of a company. The letter of permission shall issued by

Development commissioner to EOU.The letter of permission shall specify the item

manufacture for first five years. Letter of permission is also treated as license given by

concerned authority.



33/42

33

CT-3 Register:

This is the important document of the company. To avoid the duty

payment the company issues the CT-3.

Difficulties have been expressed by the 100% EOUs in the procedure for obtaining CT-3forms in particular they have suggested that since the present system of obtaining excise

duty free goods by way of CT-3 form is lengthy and time consuming , the same should be

done away with and instead the system has prevailing the sales tax side for issue of CT-3

form should be adopted wherein a pre authenticated book is issued to the GME Pvt. Ltd. for

claiming consessional rate of tax and the units are free to make use of it for obtaining raw

materials as and when required.

CT-3 forms were have 3 parts for the following purpose namely,

Part I: To be sent to the DTA supplier and be retained by the central Excise

Officer in charge of DTA supplier

Part II: To be sent by the 100% EOU to the range Superintendent

Part III: To be retained by the EOU for its record & verification.

Hence, I examined the CT-3 register .The procedure to be followed is as follows,

GME Pvt ltd gets the quotation from other company

They decides the price and

At last company issues CT-3

While examining the CT-3 register I verified every entries made by the company

The format of CT-3 register is as follows.



34/42

34

Form CT-3

No. Date: ________

FORM CT-3

Certificate For removal of excisable goods under bond

This is to certify that:

Mr. /Messer .(Name and address) is/are bona fide license holding license NO.

. Valid upto .

That he/they has /have executed a bond in form B-17 (General Surety/ General Security)

No .date for rs .with the proper officer of central Excise or custom or Deputy

Commissioner of central Excise or custom .

and as such may be permitted to remove ..(Quantity) of . (Excisable goods )

from the unit at ..to their undertaking . at ..

That the specimen signature of his/their authorized agent , namely

shri are furnished below duly attested.

Specimen signature of Central Excise officer in

owner of authorized agent Sd/- charge of the EOUAttested



35/42

35

Form A.R.3-AThis is another important document to be maintained by the company in

removal of excisable goods from a factory in INDIA to 100% EOU.

I examined whole A.R.3-A and verify the entries with other documents.

The format is as follows.

Form A.R. 3-A

Application for removal of Excisable goods from a factory in India to 100%

Export oriented Undertaking

I/we holder(s) of Central Excise License No. .in form ..

apply for leave to remove the under mentioned goods from the factory at ..

to the 100 % Export oriented undertaking of Mr./ Messers ..

No. And date

of entry in

RGI

Register

Description

of goods

No. And

description

of packages

Gross weight

of packages

Marks and

number of

packages

(1) (2) (3) (4) (5)

Quantity of

goods

Value Duty amt Manner of

transport

Remark

1. To be entered by the Consignor/owner or hisauthorized agent in words.



36/42

36

2. The aforesaid Mr., have executed a bond at destination ; in form B 16

Gen. Surety dated .

3. I/we hereby declare the above particulars to be true.

Place:

Date: Signature of Consignor or

his authorized agent

1. Certificate of central excise officer at factory at removal:

To,

The officer of central excise,

In charge of the 100% EOU

I hereby certify that the consignment conforms in all respect to the description given

above and I have permitted removal under Transport permit.

Place:

Date: Signature



37/42

37

B-17 Bond:

. All the EOUs are required to execute a single all purpose bond i.e. B-17

bond undertaking themselves to fulfill the conditions stipulated in the exemption notification of

EOU scheme. This bond is taken to take care of the interests of revenue arising out of goods

lost in transit, goods taken into Domestic Tariff Area for job work/ repair/ display etc but not

brought back etc. The bond is executed with the jurisdictional Assistant Commissioner of

Customs/Central Excise in charge of the unit. The format of the bond is prescribed vide

notification No. 6/98-CE ( NT) dated 2-3-1998.

The bond covers the activities which include, inter alias, transshipment of import /export

goods between port of import/export and units' premises; duty-free import/procurement from

the indigenous sources as per relevant notification and warehousing/storage in the unit;

movement of duty-free goods for job work and return; temporary clearance for repair and

display in exhibitions, testing/approvals etc.; and movement of goods against AR-4, AR-3A

and CT-3 etc. and transfer from one warehouse to another.

However, it does not cover the differential duty amount against advance DTA sale for which

a separate bond is to be executed. The bond is taken for an amount equal to 25% of the duty

forgone on the sanctioned requirement of capital goods plus the duty forgone on raw

materials required for 3 months. Surety or security equivalent 5% of the bond amount in the

form of bank guarantee is required to be given by the EOUs

After studying of all information about B-17 bond, I actually examined the bond.

It is most important document of the Export oriented unit company.



38/42

38

Form B-17 (General surety / security)*

General Bond with (surety / security) to be executed by the

100% EOUs / Units in EHTP/STP

We, having our registered office at

..Hereinafter referred to as the obligors and ..called the

Surety (ies) (which expression shall, unless repugnant to the context or meaning thereof

Include our heirs, successors, executors, administrators, liquidators, legal representative

And assignees) hereby hold and firmly bind ourselves, jointly and severally unto the

President of India hereinafter referred to as the Government in the sum of Rs .

Rupees. Only for which payment to be well and truly made, we,

The obligors bind us by these presents.

Whereas we the obligors have been granted by the government an

Industrial license for setting up a hundred present export oriented undertaking for the

Manufacture of the goods for export outside India on the terms and conditions stipulated in

Letter of intent no. Dated and we the obligors have duly accepted

The same terms and conditions.

I / we further declare that this bond is given under the orders of the

Central Government in the performance of an act in which the public are interested.In these presents the words imposing singular only shall also include

The plural and vice versa where the context so requires.

In witness thereof these presents have been signed this day .

of .19 .hereinbefore written by the obligor(s) and the surty(ies).

Place:

Date: signature of the obligor

Witness (1) Address (1) Occupation

(2) Address (2) Occupation signature of surety



39/42

39

Continued

Witness (1) Address (1) Occupation Signature and date

(2) Address (2) Occupation Name .

Designation ..

Accepted for and on behalf of the President Of India on ..day ..

of ..19 ..

Signature and date

Name ..

Designation ..

I had studied the B-17 bond. A single all-purpose Bond was required to be

furnished by 100 % EOU in lieu of the different bonds being executed earlier. The B-17

bond can be executed with either surety or security.



40/42

40

Some other important documents, which I have examined and verified

But due to lack of time I cant, get sufficient information about them . They are

As follows.

1.Daily stock register:

The company maintained daily stock register. Daily stock

register was consisting with entries regarding with daily production from the company.

It also consists of day-to-day dispatched goods entries. it also consist the stock lying with

the factory premises. Thus daily stock register consists every stock of goods which are lying

with the factory. The goods exported were returned back also recorded in this register.

2.Proof of export register:

This is another important register of company. Proof of export

register was consisting the bills at the time of export. This invoice or bill is considers as a

proof of export. I examined the register and also found the entries, which were not recorded

in it. It must be submitted to department on monthly basis.

At this stage the study of documents get over.



41/42

41

Conclusion:

At this stage the study of documents get over but some

important points which were covered in Audit report was as follows (As per

auditor s view)

1. Goods exported were returned back but not entered in DSA register

2. Daily stock register is not maintained product wise as each product is

cleared under different values.

3. Proof of export should be submitted to dept. on monthly basis.

4. Records of any clearance from factory to be maintain.

5. Service tax on Export commissions is to be paid for the unit on monthly

basis.



42/42

Bibliography:

For making this project report I refereed the following books.

1.NABHI s Manual for 100% Export units NABHI Publication

2.Central excise act and rules
