att 954 manual
TRANSCRIPT
-
7/31/2019 Att 954 Manual
1/31
Part 2
Please readPart 1 I mportant ProductInformation, in clud ed in your packa ge.
User s Manua l forFour -Line In t ercom /
Speakerp hone 95 4
Lucent 0954 cover.L1 5/9/98, 12:17 PM3
-
7/31/2019 Att 954 Manual
2/31
199 8 Ph i li p s C on sum er Co m m un icat ions L .P. Al l r igh ts r eser ve d .Printed in Mex ico. Issue L1
Lucent 0954 cover.L1 5/9/98, 12:17 PM2
-
7/31/2019 Att 954 Manual
3/31
1
CONTENTS
BE FORE Y OU BE GIN . . . . . . .. . . . . . .. . . . . . .. . . 3
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Table/ Desk Installation .......................... 4Wall Installation ..................................... 6
T E LE P HONE F E AT URE S ET UP . . . . . . . .. 10Assign I ntercom Num ber .. .. . .. . .. . .. . .. . .. . 10Set th e Clock . ...................................... 10Set Dial Mo de ...................................... 10Set for Tw o or Three Phone Lines.. .. . .. . 11Set Up for a Priv ate Line ...................... 11Change BATTERY D isplay ................... 11
OP E RAT ION . . . . . .. . . . . .. . . . . . .. . . . . .. . . . . .. . . . 12Mak in g a Call ....................................... 13Call Privacy ......................................... 13Lin e-In -Use Ligh ts ................................ 13Volu m e ................................................ 14Redial .................................................. 15Aut o Redial .......................................... 15Ho ld .................................................... 15Sw itch Betw een Lines ......................... 15Mu te .................................................... 16Flash .................................................... 16Temp orary Tone Dialing ...................... 16Conferen ce Calls ................................. 16Do No t D isturb .................................... 17Transfer a Call ...................................... 17Tim er ................................................... 18
T E LE P HONE ME MORY . . . . . . .. . . . . . .. . . . . . 19Dir ector y Card .................................... 20Stor in g Num bers in Mem ory .. .. . .. . .. . .. . . 20Storing a Pause in a
Mem ory Num ber .. .. . .. . .. . .. . .. . .. . .. . .. . .. . 20Stor ing a Tempo rary Tone Signal
in a Mem ory Num ber .. .. . .. . .. . .. . .. . .. . .. 20Stor ing F lash in a Memor y Num ber . .. .20Erasing Mem or y Nu mb ers ................... 20
INT E RCOM OP E RAT ION . . . . . . .. . . . . . .. . . . 2 1Basic Int ercom O peratio ns .................. 22Making an Intercom Cal l or Page .. .. . .. . 22Answering an Intercom Cal l or Page .. .22Ending an Intercom Cal l or Page .. .. . .. . .22Paging Al l Phones ................................ 23Answ erin g an ALLPAGE ....................... 23Making an Intercom
Confer ence Call ............................... 23Room M oni tor ..................................... 23Checking Your Stat ion N um ber .. .. . .. . .. . 23
IN CASE OF DIFFICULTY . . . . . . . . . . . . . . . . . 24
E X P ANDIN G T HE 954 SY ST E M . . . . . . . . 2 6CENT RE X OP E RAT ION . . . . . . .. . . . . .. . . . . . . 2 7Setup Check list ................................... 27Sett ing Up a Fourth Line
for Each Station ............................... 27Enabl ing/D isabl ing Attendant Stat ion .. 27Atten dant Op eration ........................... 28Settin g Ring Delay Duratio n ................ 28Answering a Delayed Ring .. .. . .. . .. . .. . .. . . 28Picking Up Anoth er Stat ions Line .. .. . .. 29
Lucent 0954 book.L1 5/7/98, 10:34 AM1
-
7/31/2019 Att 954 Manual
4/31
2
Lucent 0954 book.L1 5/7/98, 10:34 AM2
-
7/31/2019 Att 954 Manual
5/31
3
BEFORE YOU BEGIN
You m us t have a m odu lar t e lephone j ack and e lec t r i cal ou t l et nearw here youre instal l ing the ph one.
The t o tal l eng t h o f t e lephone li ne co rd used in t h i s syst em i sim po rtant . I f the total length of te lepho ne l ine cord is m ore than
600 feet, you m ay need to u se a special f i l ter d evice. You can call1 800 PCC9125 for in form at ion about th is f i l ter. You l l need tocontact a professional to install this f i l ter.
I d en t i fy t h e n u m b e r o f p h o n e l i n es y ou l l use .
A l l connect ed phones m ust have t he sam e Line 1 phone num ber fo r
In tercom and Paging to w ork .
Assign a d i f fe ren t I n t er com Ex t ension Num ber ( 11 t h rough 22 ) t o
each 954 telephon e. You l l need to do th is indiv idual ly at eachte lephone.
Dec ide if you w an t a p r i vat e l i ne. A p r i vat e l i ne does no t appear onal l conn ected pho nes.
Lucent 0954 book.L1 5/7/98, 10:34 AM3
-
7/31/2019 Att 954 Manual
6/31
4
Table /Desk Insta l la t ion1 Install 3 AAA batteries.
Press i n on t he t abs and rem ove t he t elephone base .
Press i n on t he t abs on t he bat t er y doo r, and rem ove i t .
I nse r t 3 AAA bat t er i es, and rep lace t he bat t er y doo r .
Rep l ac e t h e t el ep h o n e b ase.
NOTE: Batter ies reta in telephone m em ory in the event of a power fa i lu re.I f power fa i ls, th i s phone wi l l not w ork .
INSTALLATION
2 Connect the telephone l ine cords to the telephone.
NOTE: If t he phone ri ngs w hen you fir st conn ect the l in e cords, you n eedto set the phon es in tercom nu m ber. See Assign In tercom Nu m ber in the
TELEPHO NE FEATURE SETUP sectio n of t hi s m an u al .
Four One-Line Jacks
M o d u l a r Telephon e Jack sL ines 1 an d 2
M o d u l a r Telephon e Jack sL ines 3 an d 4
Telephon e Jack s
Power Cord TelephoneL ine Cords
S ta n d a rd Electr icalOut le t
Lucent 0954 book.L1 5/7/98, 10:34 AM4
-
7/31/2019 Att 954 Manual
7/31
5
Two Two-Line Jacks
INSTALLATION
TelephoneL ine Cords
Telephon e Jack s
M o d u l a r Telephon e JackL ines 1 an d 2
M o d u l a r Telephon e JackL ines 3 an d 4
Power Cord
S ta n d a rd Electr icalOut le t
3 Connect the power adapter.
Use on ly the pow er adapter prov ided w i th th is produc t . To obta in a
replacement, call 1 800 PCC9125.
Plug one end of the p ow er adapter into the jack labeled ADAPTERon th e back of the ph one. Plug the oth er end into a standard
elect r ical out let .4 Connect the handset cord.
Plug one end of th e coi led handset cord into the jack on t he bot to m
of the ph one. Plug the other end into t he handset , and hang up.
5 Check for d ial tone.
Lift th e handset and l isten for a dial ton e. I f you cann ot h ear a dialtone, turn to IN CASE OF DIFFICULTY in this manual.
Lucent 0954 book.L1 5/7/98, 10:34 AM5
-
7/31/2019 Att 954 Manual
8/31
6
W al l I nst a l la t i on1 Reverse the handset tab.
Hold dow n the sw i tchhook , then pu l l the tab out and ro ta te i t 180degrees. Release the tab so it sett les into p osit ion .
2 Install 3 AAA batteries.
Press i n on t he t abs and rem ove t he t elephone base .
Press i n on t he t abs on t he bat t er y doo r, and rem ove i t .
I nse r t 3 AAA bat t er i es, and rep lace t he bat t er y doo r .
3 Turn the base, as shown, and attach it to the bottom of the
phone.
INSTALLATION
Lucent 0954 book.L1 5/7/98, 10:34 AM6
-
7/31/2019 Att 954 Manual
9/31
7
4 Connect the telephone l ine cords to the telephone.
Four One-Line Jacks
Two Two-Line Jacks
5 Connect the power adapter to the telephone.
Use on ly the pow er adapter prov ided w i th th is produc t . To obta in a
replacement, call 1 800 PCC9125.
Plug one end of the p ow er adapter into the jack labeled ADAPTERon the back o f the phon e.
TelephoneL ine Cord s
Telephon e Jack s
M o d u l a r Telephone JackL ines 1 an d 2
M o d u l a r Telephon e JackL ines 3 an d 4
Power Cord
S ta n d a rd Electr icalOut le t
INSTALLATION
Sta n d a rd Electr icalOut le t
M o d u l a r Telephon e Jack sL ines 1 an d 2
M o d u l a r Telephon e Jack sL ines 3 an d 4
Telephon e Jack s
Power Cord TelephoneL ine Cords
Lucent 0954 book.L1 5/7/98, 10:35 AM7
-
7/31/2019 Att 954 Manual
10/31
8
6 Mount the phone on the wall.
Four One-Line Jacks
Two Two-Line Jacks
NOTE: I f you have three modu lar telephone jacks, m oun t the phone onto
a jack wi thout a w a l l -m ount i ng adapter. I f you have four m odu lar
telephone jacks, moun t the phone onto a jack w i thout a w a l l -m oun t ing adapter.
INSTALLATION
M o d u l a r TelephoneJack L in e 1
M o d u l a r Telephone
Jack s Lin es3 a n d 4
TelephoneL ine Cord
TelephoneL ine Cord
S ta n d a rd Electr icalOut le t
M o d u l a r TelephoneJack Line 2
Power Cord
TelephoneL ine Cord
S ta n d a rd Electr icalOut le t
M o d u l a r TelephoneJack L in es3 a n d 4
M o d u l a r Telephon e JackL ines 1 an d 2
Power Cord
Lucent 0954 book.L1 5/7/98, 10:35 AM8
-
7/31/2019 Att 954 Manual
11/31
9
7 Plug the power adapter into a standard electrical outlet.
Convenience Port: I f you w ant to con nect anoth er device (such as
an answ er ing m achin e or fax m achin e) to th e w al l jack, you can usethe jack on the ph one labeled AUX. Th is conven ience por t w i l l
alw ays use Line 2; a call pic ked up on Lin e 2 at anoth er exten sionmay interrupt a fax, modem, or message transmission.
Conven ience Por t
INSTALLATION
Sta n d a rd Electr icalOut le t
Lucent 0954 book.L1 5/7/98, 10:35 AM9
-
7/31/2019 Att 954 Manual
12/31
1 0
Ass i gn I n t e r com Number1 Do n ot l i f t th e handset .
2 PressG,*,#.
3 Enter tw o digi ts (1122).
4 PressI. You w i l l hear a conf i r mat ion r ing.
NOTE: I f you du p l ica te an in te rcom nu m ber, you l l hear a w arn in g tone.Repeat Steps 14 a nd assign a di fferent nu m ber.
5 Pry up the in tercom nu mb er card cover, w r i te the in tercom nu mberon t he card, and rep lace the cover.
Set the Clock.NOTE:You l l hear a confi rm ati on ton e w hen you enter n um bers corr ect ly.If you m ake a m istake, press an d releaseS to star t over.
1 Press and releaseS. The screen displays zeros.
2 Press and release * fo r AM o r # for PM
OR
Go on to Step 3 i f you w ant the c lock set to mi l i tary/Europ ean t im e.
3 Enter tw o digi ts to set th e mon th ( for examp le, pr ess03 fo rMarch).
4 Enter t w o d igi ts to set th e date ( for examp le, press09 fo r the
n in t h ) .5 Enter on e digi t for th e day of th e w eek ( for examp le, press1 fo r
Sunday or 5 for Th ursday).
6 Enter tw o digi ts for the hour ( for examp le, pr ess01 fo r oneoc lock , or 11 for eleven oc lock) .
7 Enter tw o digi ts for the m inut es ( for examp le, press31 for :31).
Set D i a l Mode1 PressG,*,#,*.
2 Press and release 2 for tone dial ing
OR
Press and release 3 for p ulse dial ing.
3 Press and releaseM. You l l hear a conf i r mat ion r ing i f youveentered informat ion correct ly .
TELEPHONE FEATURE SETUP
Lucent 0954 book.L1 5/7/98, 10:35 AM10
-
7/31/2019 Att 954 Manual
13/31
1 1
Set for Two or Three Phone L inesI f youre not us ing al l four ph one l in es, you need to t urn of f th e l ine status
for the unused l ine. I f you exp and to a third o r fourth l ine, tur n the l inestatus back on . You cann ot tu rn o ff l in e status for Lin e 1.
1 PressG,*,#.
2 Press2 for Line 2
OR
Press3 for Line 3
OR
Press4 for Line 4.
3 Press0
to tur n of f l in e status OR
Press1 to tur n on l ine status.
4 PressT. You l l hear a conf i rm at ion r in g.
Set Up f o r a Pr i va t e L i neThis feature wo rks only i f you have thr ee ph one l ines connected. Line 4 mayvary f r om ph one to ph one, so you can con sider th is a pr ivate l ine th at oth er954 phones cannot access.
NOTE: The phone nu m ber for L in e 1 mu st be the sam e on al l phones for the in ter com an d paging featu res to wor k.
1 PressG,*,#.2 Enter a di f ferent l ine num ber (0508) for each pr i vate l ine.
3 Press and releaseH. You l l hear a conf i r mat ion r ing.
Change BATTERY DisplayW hen b at tery p ow er is low, the screen f l ashes BATTERY. Replace thebat ter ies pro mp t ly to p revent mem or y loss (see the INSTALLATIO N sect ion
in th is manual) . You can set the p hon e so th e screen w ont d isplay theBATTERY message.
1 PressG,*,#,*.
2 Press and release 0 to p revent BATTERY display
OR
Press and release 1 to enable BATTERY display.3 Press and releaseC. You l l hear a conf i r mat ion r ing.
TELEPHONE FEATURE SETUP
Lucent 0954 book.L1 5/7/98, 10:35 AM11
-
7/31/2019 Att 954 Manual
14/31
1 2
OPERATION
Preventsi n te r ru p t io n s d u r i n g a c a l l
Ac t iva te cus tom -cal l ing serv ices
Redia l lastn u m b er c a l l ed
Pu t a ca l le r o n h o ld
Mu te th e m i c r o p h o n e
Ac t iva te speakerphone
Ad ju st R in g er a n d Handset/Speakerphone
v o l u m e
L ine- in -use l igh ts
Redirect ani n c o m i n g ca l l to an y o ther 9 5 4 p h o n e
Au to ma t i c a l l y r ed ia ls a n u m b e r w h en the l ine you re ca l l in g is busy
Displays thee lapsed ca l l t i m e i n m i n u t es and seconds
Lucent 0954 book.L1 5/7/98, 10:35 AM12
-
7/31/2019 Att 954 Manual
15/31
1 3
NOTE:When you m ake a call, the phon e selects the fir st ava il able l in e.When you a nswer a cal l , the phone autom ati cal ly selects the r i ngin g l in e.
I f you h ave a pr i vate l in e, the phone au tom ati cal ly selects that l in e.
Making a Cal lHan d setTo m ake a call, l i f t th e handset . You can di al your cal l manual ly or use themem or y dial ing feature.
To answer a call, l i f t th e hand set. Replace the handset to end th e call.
To override automatic line se lection, pr ess and release a LINE but ton
(this act ivates the speakerphone), then l if t the handset.
S p eaker p h o n eTo make a call, press and releaseK. Th e SPEAK ER li ght go es on . Waitfor a dial ton e, then d ial the cal l m anual ly or b y using memo ry d ial ing.
To answer a call, pressK. PressK again to end th e cal l .
To switch from h andset to speakerphone , pressK, then replacethe handset .
To switch from sp eakerpho ne to handset, l i f t th e handset .
To override automatic line se lection, pr ess and release a LINE but ton
(this act ivates the speakerphone).
Cal l Pr ivacyTo ensure call pr ivacy, th e ph on e allow s on ly on e set at a t im e to use a l in e.
Cancel ing Cal l Pr ivacyDur ing th e cal l , press the l in e but to n for the cal l . You l l hear a shor t r in ging
tone. Oth ers can now join the cal l .
Restor ing Cal l Pr ivacyPress th e l ine but ton again dur ing th e call. Youl l h ear a dou ble-ri ng. Th eother phon es w i l l be dropped f rom th e cal l .
NOTE: Cal l pr iva cy is autom ati cal ly restored when you end the cal l .
Line- In-Use L ightsW henever a l ine is in use, the l igh t f lashes slow ly on the p hon e using th at
l ine. On the ot her p hon es, the l igh t s tays on steadi ly to indi cate som eoneelse is using t he l i ne.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM13
-
7/31/2019 Att 954 Manual
16/31
1 4
Vol umeHan d set /S p eaker p h o n e V o lu m e Co n t r o lW hen you are on a call, pr ess+ to i ncrease handset or speakerpho nevolume. Press- to decrease volu me.
Rin ger V o lu m eYou can adjust the r inger volum e w hi le the pho ne is r in ging. W hi le the l ineis r in ging, pr ess+ or - to reach th e desired level . I f m ore than one l ine isr in ging at the same t i me, both w i l l be adjusted.
Thi s ph one has four r inger volum e levels. Each t im e you adjust th e r inger,you w i l l hear a sam ple indi cat ing the volume level . To adjust r inger volume
w hen the l ine is not r i nging, fo l low the steps below.1 Press and releaseC.
2 Cho ose th e l ine for r inger adjustm ent. Press and release 1 fo rLine 1
OR
Press and release 1 for Line 2
OR
Press and release 3 for Line 3
OR
Press and release 4 for Line 4.
3 Press+ to in crease volum e
OR
Press- to decrease volum e.
Turnin g Ringe r Off
1 Press and releaseC.
2 Cho ose th e l ine for r inger adjustm ent. Press and release 1 fo r
Line 1
OR
Press and release 2 for Line 2
OR
Press and release 3 for Line 3
OR
Press and release 4 for Line 4.
3 Press- unt i l you no lo nger hear a ton e.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM14
-
7/31/2019 Att 954 Manual
17/31
1 5
Redia lThe last num ber dialed on this phon e is stored in redial mem or y unt i l you
dial ano th er num ber. To dial the same num ber again , l i f t th e handset or p ressK, l isten for th e dial ton e, th en p ressR.
Aut o Red i a lSelect a l i ne and pr essA. Th e screen d isplays BUSYDIAL as lo ng asthe nu mb er youre cal l ing is busy. The p hon e redials the num ber you ju st
cal led, and w i l l cont inu e up to 10 t im es or un t i l the oth er l ine r ings or youcancel Auto Redial.
W hen you hear the l ine r in ging, l i f t th e handset or p ressK to comp le tethe call; i f you don t , the p hon e disconnects the call after 15 seconds. Tocancel Auto Redial, pr essA, or l i f t t he h andset, or p ressK.
Hol dPress and releaseH. Th e l ight of the l in e on h old f lashes, and a dou blebeep sounds every 30 second s to rem ind you the cal l is on h old. You can
replace the handset in th e cradle w itho ut disconnect in g the cal l . Thespeakerpho ne is autom at ical ly turned o f f .
To release Hold, press and release the LINE button of the call on hold.
NOTE:You cannot pu t an in tercom ca l l on ho ld .
Disab l in g Ho ld Rem in d erThis phone com es programm ed to remin d you every 30 seconds w hen youhave a cal l on hold . You can turn this feature of f fo l low ing the dir ect ions
be low.
1 PressG,*,#,*.
2 Press and release 4 to tur n of f th e aler t beep
OR
Press and release 5 to turn on th e aler t beep.
3 Press and releaseM. You w i l l hear a conf i r m at ion r i ng.
Sw i t ch Be t w een L ines1 Press and releaseH to k eep a cal l on the f i rs t l ine.
2 Press and release the LINE button of another l ine to make or answeranot her cal l .
NOTE: I f you sw itch l in es w ith out pressin gH f i rs t, you w i l l d rop
the call.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM15
-
7/31/2019 Att 954 Manual
18/31
1 6
M u t eThi s feature lets you m ute the teleph one so that you can hear th e other
party, but the oth er party can t h ear you.
To activate this feature, press and releaseM. The MU TE ligh t goes on .
To return to the con versation , press and releaseM again.
NOTE: Sw itchin g from han dset to speakerphone or from speakerphone tohan dset, chan ging l i nes, an d pu tt in g a cal l on hold a l so cancel Mu te.
Flash
UseF instead of the sw itchh ook to act ivate telepho ne comp anysubscriber serv ices such as Call Wait in g or Th ree-Way Call ing.
Tem por ar y Tone D i a li ngI f you have dial p ulse (rotary) serv ice, you can ch ange f rom dial pu lse totouch tone di al ing du r in g a cal l by pressing *. Th is is useful if yo u need to
send to uch tone signals for access to teleph one b ank ing o r lo ng-distanceservices.
1 Dial the number.
2 Press and rel ease*. Button s pressed after thi s send t ouc h t one signals.
3 After you h ang up , the p hon e autom at ical ly return s to ro tary serv ice.
Conference Cal lsTh is featur e lets you set up a thr ee-part y call by using tw o l in es at the samet im e. You can also jo in an in tercom cal l w i th a cal l on an outs ide l ine.
1 Make or answ er a call.
2 Press and releaseH.
3 Cal l som eone on anoth er l ine.
4 W hen th is call is answ ered, pr essC. The three-party conference
begins immediately.
5 To end a conference cal l , hang up . Al l par t ies w i l l d i sconn ect .
To talk privately with one party:
1 PressH to p lace both l ines on ho ld .
2 Press a LINE but ton to talk p r ivately wi th th e person on th at l ine.3 PressC to resume con ference cal l .
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM16
-
7/31/2019 Att 954 Manual
19/31
1 7
To drop one line:
Press the LINE but t on of th e party you w ant to keep. Th e other l ine w i l l be
dropped.
NOTE: Occasiona lly, the far-end par ti es on a conference call m ight no t
hear one another.
D o N o t D i st u r bUse this feature to p revent interr up t ion s dur i ng a cal l . W hen you act ivate
this feature you w i l l n ot h ear p aging to nes, voice paging, or in com ing cal lr in gs. Instead, th e LINE light f l ashes and t he IN TERCOM ligh t goes on to
signal a call or page. I f you receive an interco m call, th e INTERCOM li ghtf lashes, and the in tercom num ber cal l ing you app ears on the d isplay.
1 Pressd to p revent in ter rup t ions.
2 Pressd again to resume normal call alerts.
Transfer a Cal lYou can t ransfer a cal l you answ er to any other 95 4 ph one. On ce youtransfer a cal l , i t can be p icked u p at any ot her 954 ph one, not just at th eintercom num ber you cal led. Transfer cal ls fal l in to tw o categor ies:
anno unced and unanno unced. An nou nced cal ls let you aler t the oth erper son verbally that they have a transferred call. U nann oun ced calls alert
the o ther person by r ing ing.
Your ph one rem inds you every 30 seconds w hen a t ransferred cal l has notbeen answ ered.
Transfer r ing an Announced Cal l
1 Pressp orI.
2 Enter the intercom num ber w here youre t ransferr ing the cal l .
3 Begin speaking to aler t the o ther person theres a cal l .
To answ er a transferr ed annou nc ed call, pr ess th e LINE butt on o f the call.
Tr an sfer r in g an Un an n o u n ced Ca l l
1 PressT.
2 Enter the intercom num ber w here youre t ransferr ing the cal l .
3 Hang up.To answ er a t ransferred u nannou nced c al l , p ick up the h andset or press the
LINE but ton of the cal l to use the speakerp hon e.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM17
-
7/31/2019 Att 954 Manual
20/31
1 8
T i m e rThe screen displays the elapsed t im e in mi nutes and seconds for th e f i rs t
ho ur (u p to 5 9 m inu tes, 59 secon ds), th en begin s at zero again . Th e t im erautomat ical ly stop s w hen you hang up . The screen displays the record ed
t im e for about s ix seconds.
PressD to start t he t im er. PressD again to stop t im ing.
OPERATION
Lucent 0954 book.L1 5/7/98, 10:35 AM18
-
7/31/2019 Att 954 Manual
21/31
1 9
TELEPHONE MEMORY
Store a pau sei n a m e m or y
n u m b e r
Store a tonesig n a l i n a m e m o r y n u m b er
D i r ec tory Ca rd
One- touch m e m o r y
lo c a t io n s
This telephon e has 18 on e-touch mem ory l ocat ions, and 18 tw o-touch
mem or y locat ion s. Each locat ion can store up to 16 digi ts . D ial num bersstored i n o ne-touch locat ions by l i f t i ng th e handset (or pressing speaker) and
pressing the but to n for the locat ion. Dial num bers stored in tw o-touchlocat ions by pressingl and th e but ton for th e locat ion.
Store theswi tchhook f lash n eeded toac cess som ec u s to m-c a l l i n g services
Access tw o-touchm em o ry loc a t io n s
Lucent 0954 book.L1 5/7/98, 10:35 AM19
-
7/31/2019 Att 954 Manual
22/31
2 0
Di r ect or y Car dRemove the d i rec tory card and w r i te in the num bers (or n ames) you w ant to
store in each mem ory locat ion .
S t o r i n g N u m b e r s i n M e m o r y1 Press and releaseG.
2 Enter the te lephone num ber you w ant to store (up to 16 d ig i t s)
OR
Press and releaseR to store the last nu mb er dialed.
3 Press the memo ry b ut ton w here you w ant to store the num ber
OR Pressl and the memo ry but ton w here you w ant to s tore the
number .
St o r i n g a P a u se i n a M e m o r y N u m b e rTo store a dialing p ause in a m emo ry nu m ber, pr ess and releaseP w h e r e
you w ant th e dial ing pause to occu r. Each t im e you pr essP, you en ter atw o-second pause in the d ial ing sequence.
St or i ng a Tempor ar y Tone S i gna l i n a Memor y NumberTo store a tone signal, press and releaset w here you w ant tone d ial ing
to b egin. Al l d igi ts entered af ter th is w i l l send ton e signals.
St or i ng F l ash i n a Memor y NumberYou can store the sw itchh ook f lash needed to access som e custom-cal l ing
serv ices in a m emo ry n um ber. Press and releaseF w here you w an t t hesw itchh ook f lash to occu r in the dial ing sequence.
E r a s i n g M e m o r y N u m b e r sTo remove a num ber f rom mem or y, you can store anoth er num ber in i tsplace. To c lear a mem or y locat ion and leave i t em pty:
1 Press and releaseG.
2 Press and rel easeP.
3 Press the memory location to be erased
OR
Pressl and the mem or y locat ion to b e erased.
TELEPHONE MEMORY
Lucent 0954 book.L1 5/7/98, 10:36 AM20
-
7/31/2019 Att 954 Manual
23/31
2 1
INTERCOM OPERATION
Act iva te cus tom -cal l ing serv ices
L ine- in -use l igh ts
Redirect ani n c o m i n g ca l l to an y o ther 9 5 4 p h o n e
Au to ma t i c a l l y red ia ls a n u m b er w h en the l ine you re ca l l in g is busy
An n o u n c e s to a l l 9 5 4 p h o n es a t same t ime
Connec t ano ther In te rc om c a l l w i th a n ou ts ide l ine
Rin g a n o th e r 9 5 4 phone conn ec ted to L ine 1
An n o u n c e ov er the speaker to
the phone youa re ca l l i n g
Lucent 0954 book.L1 5/7/98, 10:36 AM21
-
7/31/2019 Att 954 Manual
24/31
2 2
Th is interco m features both a singl e-ph on e page and a system-w ide p age.A single-ph on e page alert s only on e ph on e; a system-w ide p age alerts all
pho nes. Any ph one w i th the D o Not D is turb (DND ) feature ac t ivated w i l lno t receive a page.
An intercom cal l or s ingle-phone page automat ical ly act ivates thespeakerpho ne on th e receiv ing pho ne. You can deact ivate the speakerpho ne
by l i f t i ng the handset .
Use the f i rs t 12 mem ory b ut ton s to m ake interco m and p age cal ls . Wh en
using the intercom , these but t ons are intercom stat ions 11 throu gh 22.
Bas i c I n t e r com Oper a t i onsINTERCOM Any tw o stat ion s conn ected to Line 1 can r ing each ot her.
PAGE Lets you anno unce over the speaker o f th e ph one yourecal l ing. The p erson you ve cal led can respo nd ju st by talk in g.
ALLPAGE Lets you anno unce to al l 954 p hon es in t he system at th e
same t ime.
CONF Lets you con nect another int ercom cal l w i th an outs ide l ine.
TRNSFR Lets you receive an in com ing cal l and redir ect i t to any 954ph one on th e system.
Maki ng an I n t e r com Ca l l o r Page1 Lift the handset and pressI orp. Youl l h ear a tone.
2 Press the m emor y but t on for th e stat ion youre paging OR
Use the keyp ad to enter th e stat ion nu mb er.
NOTE:When you direct an i ntercom cal l to one stat i on, any stat i on i n thesystem can an sw er t he call .
Answer ing an In tercom Cal l or PageFor an in tercom c all, pressK orI or l i f t t he handset .
For a page , begin talk in g ( th e speaker is act ivated) or l i f t t he h andset .
End i ng an I n t e r com Ca l l o r PagePressK.
INTERCOM OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM22
-
7/31/2019 Att 954 Manual
25/31
2 3
Paging Al l Phones1 Press and releasea orp.
2 Press and release *.
3 Speak tow ard the teleph one.
4 Press and releaseK to disconnect .
Answering an ALLPAGE1 Pressa orp.
2 Use the already act ivated speakerphone, or l i f t the handset.
3 To en d, p ress and releaseK or hang up.
M aki ng an I n t e r com Conf er ence Ca ll1 Make or answ er a call.
2 Press and releaseI and enter the stat ion nu mb er.
3 After t he th ird p arty answ ers, pr ess and releaseC.
4 To end an intercom conference cal l , hang up .
NOTE:You cann ot put a n i ntercom conference cal l on hold.
Ro o m M o n i t o rYou can act ivate the speaker of anoth er ph one to m onit or sounds in thatroom .
1 Press and releasep.
2 Enter the s tat ion n umb er o f the te lephone to be mon i tored.
3 Press and releaseM i f you don t w ant sounds on your end to b eheard.
4 To end monitoring, press and releaseK.
Check i ng Your St a t i on Num ber1 Press and releaseI.
2 Use the dial pad to enter a stat ion num ber (11 to 22).
3 PressK to hang up.
4 Repeat Steps 13 unt i l the in tercom l ight goes of f . Th e last nu mb erentered is your stat ion num ber.
NOTE: I f th e intercom l i ght stays on even a fter you enter n um bers 11thr ou gh 22, your phon e does not have a stati on nu m ber. See Assign
In tercom Nu m ber in th e TELEPHON E FEATURE SETUP secti on forassigning intercom stat ion numbers.
INTERCOM OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM23
-
7/31/2019 Att 954 Manual
26/31
2 4
I f th is te leph one does not w ork p rop er ly, t r y the fol low ing suggest ions. I fyoure st i l l having problems, call 1 800 PCC9125.
No Dial Tone M ake su re al l p lugs are connec ted p roper l y. I nspec t t he l i ne co rd
conn ect ions at the m odul ar jack and at the telepho ne. Also inspect th ecoi led handset cord con nect ion at both ends.
C hec k to m ak e su re th e p ho n e i s n o t on h o ld .
Cal l Cannot Be Dialed or is Dia led S lowlyThi s pro duct co mes set to touch to ne mod e. I f you h ave dial pulse (rotary)
dial ing serv ice, you cannot dial num bers w ith th e phon e set to touch to ne.
See th e TELEPHON E FEATURE SETUP sectio n of th is m anual to set t he dialm od e to PULSE.
I n t e r f e r e n ce o n I n t e r co m o r P h o n e C a ll sThi s ph one uses sensi t ive c ircui t ry th at may pick up inter ference inenviron ment s w ith ex cessive elect r ic al noi se. To m inim ize inter ference,
keep elect r ical no ise sources aw ay f rom telepho ne w ir in g and sets.
T e lep h o n e L ig h ts F lu t te r Co n t in u o u s ly Po w e r m ay h av e b een i nt er r u p ted .
I f AC pow er i s con t ro ll ed by a w al l sw i t ch , m ake su re the sw i t ch i s
t u rned on .
Check t he power co rds on al l syst em p hones, and check t he f use o rc ircui t breaker that serves the p hon es.
Check t he t elephone j ack by d i sconnect i ng t he 954 and connec t i nganot her n on-system telephon e.
Check that al l l ine assignments are cor rec t , and that al l 954 phones areon t he l in e designated as Line 1.
D i f fi cu l t y St o r i n g N u m b e r s in M e m o r y M ake su re you a re p ressing t he co r rec t sequence o f bu t t ons f o r st o r i ng
one-touch and two-touch numbers.
M ake su re t he te lephone i s i d le w h i l e you are st o r i ng num bers. I f youl i f t th e handset or p ressK w hi le stor ing num bers, the numb er w i l lbe entered inco rrect ly .
IN CASE OF DIFFICULTY
Lucent 0954 book.L1 5/7/98, 10:36 AM24
-
7/31/2019 Att 954 Manual
27/31
2 5
T e lep h o n e Do es No t R in g M ake su re t he Do No t D ist u rb (DND) f eat u re i s no t ac t i vat ed.
M ak e su re r in ger s ar e t u rn ed o n .
I f there are several non-system phon es on the l ine that doesn t r ing ,
disconnect some of them. Having too m any phon es conn ected can alsoresul t in low r in ger volum e for non-system teleph ones.
I f the INTERCOM l ight f lashes but you don t hear a pag ing signal , makesure the D o N ot D isturb feature is not act ivated.
I n t e r co m P ag in g Sig n a l No t Rece ivedMake sure you have pro gramm ed your intercom stat ion num ber corr ect ly.
Cannot Jo in a Conversat ion in ProgressThe p r ivacy feature p revents another set on t he system f ro m i nterr up t ing acon versatio n. Make sure you p ress th e l ine but ton t o release priv acy.
L in e L ig h ts Rem ain OnI f the l in e l ights remain on even i f no l in e is conn ected, make sure the
system is pro gramm ed for t hat l in e to be absent. See Set for Tw o or Thr eePhon e Lines in t he TELEPHON E FEATURE SETUP section of th is manu al.
To n e Sig n a ls Do N o t Act iva t e a Rem o t e Dev ice Tone signal i ng does no t wo rk du r ing con fe rence cal l s.
The phone generat es t ones o f f ixed du rat i on , w h ich m ay no t be l ong
enou gh to act ivate som e devices such as answ erin g machi nes.
An sw er in g M ach in e Do es No t An swerTeleph one answ er ing m achin es mu st conn ect direct ly to the l ine. I f you
have a tw o-l ine answ er ing m achin e, i t m ust conn ect to a tw o-l ine jack, or t otw o jacks on d i f ferent l ines.
Op er a t io n Du r in g a P o wer F a i lu r eThis pho ne does not o perate dur ing a pow er fai lure.
Cannot Use DND, TIMER, ALLPAGE or SETMake surel is not tur ned on. I f LOWER is displayed, pressl t o t u rni t o f f .
IN CASE OF DIFFICULTY
Lucent 0954 book.L1 5/7/98, 10:36 AM25
-
7/31/2019 Att 954 Manual
28/31
2 6
W hen you com bine tw o or m ore 954 phon es you c reate an in terac t ingsystem. You can have up to tw elve 954 ph ones and u p to eight t e lephon e
lin es. The 954 can also be used w ith Cen trex service.
You can use th e four th l ine on each stat io n as a pr ivate l ine. Th e diagram
below il lu strates each stat io n as having access to th ree l ines. N oti ce that thefourth l ine is not the same on every stat ion (see Set t ing Up a Four th Line for
Each Stat ion in t he CENTREX O PERATIO N section of th is m anual). Th isdiagram also app lies to Centr ex users.
NOTE: All 954 featu res wor k a s descr ibed ear l i er i n th is man ua l.
EX PAN DI N G TH E 9 5 4 SYSTEM
Lines in System
Intercom
Stations
ICM 12
ICM 13
ICM 14
ICM 15
ICM 16
ICM 17
ICM 18
ICM 19
ICM 20
ICM 21
ICM 22
L1
3
3
3
3
3
3
3
3
3
3
3
3
L2
3
3
3
3
3
3
3
3
3
3
3
3
L3
3
3
3
3
3
3
3
3
3
3
3
3
L4
3
3
L5
3
3
3
L6
3
3
L7
3
3
L8
3
3
ICM 11
Lucent 0954 book.L1 5/7/98, 10:36 AM26
-
7/31/2019 Att 954 Manual
29/31
2 7
Setup Checkl istBefore expandin g your system o r in stal l ing for Centrex, rev iew the
instal lat ion checkl i st . I f you h ave Centrex, contact your local te lephon ecompany for fur ther informat ion about Centrex serv ice.
T h e p h o n e n u m b e r fo r Li n e 1 m u st b e th e sam e o n al l p h o n es i norder for th e Intercom and Paging features to w ork.
D e te r m i ne th e n um b e r of p h o n es t h at w i l l b e on t h e sy st em .
I d en t i fy t h e p h o n e t h at w i l l b e t h e at t en d an t p h o n e.
I den t i f y t he p r i vat e l i ne f o r t he at t endan t phone . The at t endan tph one mu st have i ts ow n pr ivate l ine. Thi s l ine is not shared w ithany o ther p hone.
Fo l l ow t he regu lar i nst al l at i on i nst r uc t i ons i n t h i s m anual . En ab le t h e at ten d an t p h o n e.
St o re t he Cen t rex p i c kup codes and t he seven -d ig it phone num bersint o mem or y location s. See TELEPHON E MEMO RY in th is m anual.
Set t ing Up a Four th L ine for Each Stat ion1 PressG*#.
2 Enter th e l ine numb er (0508) you w ant as your four th l in e. For
examp le, if stat ion s 16, 19, and 20 share Lin e 5, th ose stat ion s w ou ldenter 05.
3 Press and releaseH. You l l hear a conf i r mat ion r ing.
Repeat Step s 13 for each stat io n on th e system th at w il l h ave a pr ivate l ine.
Enabl ing/Disabl ing At tendant Stat ionTh is featur e lets you h ave an atten dant p ho ne on th e system. An attend antphon e can p ick up o ther Cent rex l ines through Cent rex sw i tch ing. Ident i f y
w hich stat ion you w ant as the at tendant . Th e at tendant ph one should alsohave a private l ine.
1 Make sure the p hon e is not in u se.
2 PressG*#*.
3 Press1 to enable
OR
Press0 to disable.
4 PressM. You l l hear a conf i r mat ion r ing.
CENTREX OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM27
-
7/31/2019 Att 954 Manual
30/31
2 8
A t t e n d a n t O p e r a t i o nOn ce anoth er 954 p hon e has enabled i t s delayed r ing, the at tendant ph onew i l l receive those cal ls. Al l t he 954 features w ork in t he same m anner asdescr ib ed in the beginni ng of th is manual.
The at tendant p hon e can pick u p oth er Centrex l in es thro ugh Centrexsw itchin g. The at tendant can store the Centrex p ickup codes and th e seven-
digi t p hon e num ber of each stat ion , except for t he at tendant p hon e, intomemo ry locat ions .
Set t ing Ring Delay Durat ionTh is feature allow s oth er 954 teleph ones calls to r ing at the attendant ph one.After a specif i ed r in g delay, the calls w il l r i ng at the attendant ph one. For a
10-second delay b efore the c alls r in g at th e attendant p hon e, enter 10.
1 PressG*#.
2 Enter th e num ber of seconds for th e r ing delay (0130)
OR
Enter 00 to c ancel Ring D elay.
3 PressM. You l l hear a conf i r mat ion r ing.
Answer ing a Delayed RingThe at tendant ph one r i ngs and t he screen displays the stat ion num ber of t he
intercom sending th e delayed r ing.
1 Select a fr ee l in e.2 Enter the Cent rex p ickup code.
3 Enter th e seven-digi t p hon e num ber of t he stat ion sendin g the
delayed r in g
OR
Press the cor respo ndin g memo ry loc at ion s for the Centrex pi ckupcode and the seven-digi t p hon e num ber for th e stat ion sending th e
delayed r ing.
NOTE: I f t he attenda nt is usin g another l i ne an d receives a delayed r in g,
the attenda nt phone can pu t the other l in e on hold a nd fo l low Steps 13.If th e attenda nt is on an in tercom cal l , the intercom cal l shou ld be endedbefore pickin g up the r i ngin g phone.
CENTREX OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM28
-
7/31/2019 Att 954 Manual
31/31
2 9
Picking Up Another Stat ions L ine1 Choose a f ree Centrex l ine.
2 Enter the Cent rex p ickup code.
3 Enter th e seven-digi t p hon e num ber of the l ine you w ant
OR
Press the cor respon ding m emor y locat ions for the Centrex pi ckup
code and the seven-digi t p hon e num ber for th e stat ion sendin g thedelayed r ing.
CENTREX OPERATION
Lucent 0954 book.L1 5/7/98, 10:36 AM29