atb8 monobloc cabinet

77

ATB8MONOBLOC

CABINET

ATB8 MONOBLOC CABINET

from left:- detail of cable entry plates- detail of double cable entry

- detail of mounting plate sliding mechanism

finishing profile

removable back

mounting plate included in the supply

frame, roof and sidewall are one integral piece

easy-to-assemble modular plinth ATZE(dedicated crosspieces)

innovative cable-entry floor using modular cable conduit plates (double cable entry

for enclosures larger than 1200)

CABINETS

closing system with:• 3 points for H=1600,

• 4 points for H=1800-2000,with possibility to mount different inserts

www.klinkmann.com

78 ATB8 MONOBLOC CABINET

DIMENSIONSW X H X D

CABINET WITH GLAZED DOOR

(2)

CABINET WITH BLANK DOOR

(1) UNIVERSAL CORNER PIECES H=100

ATZE-A100

PLINTH H=100

FRONT CROSSPIECES

ATZE-T0600

SIDE CROSSPIECES

ATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0500BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400BATZE-T0400B

ATZE-T0600ATZE-T0600ATZE-T0600ATZE-T0600ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T0800ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1000ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1200ATZE-T1400ATZE-T1600ATZE-T1600ATZE-T1600ATZE-T1800

ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100ATZE-A100

ATB8061604PR600 X 1600 X 400ATB8061804PRATB8061805PRATB8062004PRATB8062005PRATB8081604PRATB8081804PRATB8081805PRATB8082004PRATB8082005PRATB8101604PRATB8101804PRATB8101805PRATB8102004PRATB8102005PRATB8120804PR*ATB8121004PR*ATB8121604PRATB8121804PRATB8121805PRATB8122004PRATB8122005PRATB8141004PR*ATB8161004PR*ATB8161804PRATB8162004PRATB8181004PR*

ATB8061604PXATB8061804PXATB8061805PXATB8062004PXATB8062005PXATB8081604PXATB8081804PXATB8081805PXATB8082004PXATB8082005PXATB8101604PXATB8101804PXATB8101805PXATB8102004PXATB8102005PX

600 X 1800 X 400600 X 1800 X 500600 X 2000 X 400600 X 2000 X 500800 X 1600 X 400800 X 1800 X 400800 X 1800 X 500800 X 2000 X 400800 X 2000 X 5001000 X 1600 X 4001000 X 1800 X 4001000 X 1800 X 5001000 X 2000 X 4001000 X 2000 X 5001200 X 800 X 4001200 X 1000 X 4001200 X 1600 X 4001200 X 1800 X 4001200 X 1800 X 5001200 X 2000 X 4001200 X 2000 X 5001400 X 1000 X 4001600 X 1000 X 4001600 X 1800 X 4001600 X 2000 X 4001800 X 1000 X 400

(1) supply includes fully welded frame with removable rear panel, blank door and ATPA mounting plate. To be ordered separately plinth and eyebolts WTGS-003

(2) supply includes fully welded frame with removable rear panel, glazed door and ATPA mounting plate. To be ordered separately plinth and eyebolts WTGS-003

(*) ATB8 for widths up to 1800mm

MAIN ACCESSORIES

Note: to order an ATPA mounting plate (as a spare part), check on page 36.


ATB8 CABINET WITH SINGLE DOOR

CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with door stiffening frame.

PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7035 textured finish.

DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry- mounting plate manufactured from 25/10 sendzimir sheet steel

(for ATB8 W=1000, mounting plate manufactured from 30/10 sendzimir sheet steel)

CONFORMITY AND APPROVAL

PROTECTION RATINGS - IP 66 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane

foam seal (for technical details, refer to page 260)- impact resistance IK10 complying with IEC EN62208; EN50102.

MAIN ACCESSORIES

ATZE modular plinth (see page 86)

eyebolts (see page 87)

CABINETS


DIMENSIONAL SPECIFICATIONS

WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE

HEIGHT600 1609 395 310 250 313

1809 395 310 250 313174 445174

14301630445600

B P D E F M N16006001800

A C400400600

1809 495 310 350 313 274 16304456001800 5006002009 395 310 250 313 174 18304456002000 4006002009 495 310 350 313 274 18304456002000 5006001609 395 510 250 513 174 14306458001600 4008001809 395 510 250 513 174 16306458001800 4008001809 495 510 350 513 274 16306458001800 5008002009 395 510 250 513 174 18306458002000 4008002009 495 510 350 513 274 18306458002000 5008001609 395 710 250 713 174 143084510001600 40010001809 395 710 250 713 174 163084510001800 40010001809 495 710 350 713 274 163084510001800 50010002009 395 710 250 713 174 183084510002000 40010002009 495 710 350 713 274 183084510002000 5001000

MOUNTING PLATE DIM.

485 14801680485

L H

1680485188048518804851480685168068516806851880685188068514808851680885168088518808851880885

350350

I

450350450350350450350450350350450350450

inner mounting plate

Note: if an inner door is needed, please check the code ATPI on page 43.


ATB8 600 WIDE

ATB8 800 WIDE

ATB8 1000 WIDE

CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR CABINET WITH GLAZED DOOR

600 1600 4001800 400

ATB8061604PR ATB8061604PXATB8061804PXATB8061804PR600

1800 500 ATB8061805PXATB8061805PR6002000 400 ATB8062004PXATB8062004PR6002000 500 ATB8062005PXATB8062005PR600

WIDTH DEPTHHEIGHT


800 1600 4001800 400



WIDTH DEPTHHEIGHT


1000 1600 4001800 400



WIDTH DEPTHHEIGHT



CABINETS



ATB8 CABINET WITH DOUBLE DOOR

CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with door stiffening frame.


DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry.- mounting plate manufactured from 30/10 sendzimir sheet steel


PROTECTION RATINGS- IP 55 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane


MAIN ACCESSORIES





WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE MOUNTING PLATE DIM.

HEIGHT1200 1609 395 910 250 421

1809 395 910 250 421174 445174

143016304451200

B P D E F M N160012001800

A C4004001200

1809 495 910 350 421 274 163044512001800 50012002009 395 910 250 421 174 183044512002000 40012002009 495 910 350 421 274 183044512002000 50012001809 395 1310 250 621 174 163064516001800 40016002009 395 1310 250 621 174 183064516002000 4001600

1085 148016801085

L IH

168010851880108518801085

350350450350450

1680148518801485

350350

CABINETS



ATB8 1200 WIDE

ATB8 1600 WIDE

CABINET CODESCABINET DIMENSIONS CABINET WITH BLANK DOOR

1200 1600 4001800 400

ATB8121604PRATB8121804PR1200

1800 500 ATB8121805PR12002000 400 ATB8122004PR12002000 500 ATB8122005PR1200

WIDTH DEPTHHEIGHT

ATB8 HORIZONTAL VERSION

CHARACTERISTICS- STRUCTURECabinet structure manufactured from 15/10 sheet steel with removable rear panel.Door manufactured from 20/10 sheet steel with stiffening profiles.


DELIVERY- cabinet structure- door complete with Ø 3mm double bar locking system- adjustable cable entry- mounting plate manufactured from 30/10 sendzimir sheet steel.


PROTECTION RATINGS- IP 55 complying with IEC EN62208; EN60529- NEMA 12 complying with UL508A; UL50- protection degree guaranteed by the two-component polyurethane


MAIN ACCESSORIES




1600 1800 4002000 400

ATB8161804PRATB8162004PR1600

WIDTH DEPTHHEIGHT

To replace the mounting plate ATPA, use the codes listed below.



1200 800 4001000 400

ATB8120804PRATB8121004PR1200

1000 400 ATB8141004PR14001000 400 ATB8161004PR16001000 400 ATB8181004PR1800

WIDTH DEPTHHEIGHT


WIDTH DEPTHCABINET DIMENSIONSDIMENSIONS FLOOR FIXING CABLE ENTRY DOOR SPACE

HEIGHT1200 809 395 910 250 420

1009 395 910 250 420174 445174 4451200

B P D E F M80012001000

A C4004001200

1009 395 1110 250 520 174 54514001000 40014001009 395 1310 250 620 174 64516001000 40016001009 395 1510 250 720 174 745

MOUNTING PLATE DIM.

1085 6801085 880

L H

1285 8801485 8801685

350350

I (max)

35035035088018001000 4001800

CABINETS

FRONT INSERTED MOUNTING PLATE (SPARE PART)CABINET DIM.ATPA

CODEMOUNTING PLATE DIM.

ATPA-120080ATPA-120100

A P L HB12001200

8091009

395395

10851085

I (max)350350

680880

ATPA-140100 1400 1009 395 1285 350880ATPA-160100 1600 1009 395 1485 350880ATPA-180100 1800 1009 395 1685 350880

86

ATB8COMPLEMENTARY

ACCESSORIES

ATB8COMPLEMENTARY ACCESSORIES

MODULAR PLINTH ATZE

CHARACTERISTICSCorner pieces manufactured from 25/10 sheet steel, with PVC front covers caps.Front and side crosspieces manufactured from 20/10 press bent sheet steel.

PAINT FINISHETA standard epoxy polyester powder coating.Colour: RAL 7025 textured finish

DELIVERYThe modular plinth is made up of- corner pieces: supply includes 4 pieces complete

with front covers and mounting hardware- front crosspieces: supply includes 2 pieces- side crosspieces: supply includes 2 pieces

Supply includes 2 pieces.

To order the front crosspieces H=200, add the suffix “D” to the code. I.E.: ATZE-T0600D.

Supply includes 4 pieces with mounting accessories.

UNIVERSAL FRONT CROSSPIECESATZE CODE

DESCRIPTION CROSS.LENGTH (mm)

FRONT CROSS. FOR PLINTH W=600 444FRONT CROSS. FOR PLINTH W=800

ATZE-T0600ATZE-T0800 644

FRONT CROSS. FOR PLINTH W=1000ATZE-T1000 844FRONT CROSS. FOR PLINTH W=1200ATZE-T1200 1044FRONT CROSS. FOR PLINTH W=1400ATZE-T1400 1244FRONT CROSS. FOR PLINTH W=1600ATZE-T1600 1444FRONT CROSS. FOR PLINTH W=1800ATZE-T1800 1644

Supply includes 2 pieces.

To order the side crosspieces H=200, add the suffix “D” to the code.I.E.: ATZE-T0400BD.

SIDE CROSSPIECES FOR MONOBLOC ATB8ATZE CODE

DESCRIPTION CROSS. L (mm)

SIDE CROSSPIECES FOR PLINTH D=400 206306SIDE CROSSPIECES FOR PLINTH D=500

ATZE-T0400BATZE-T0500B

UNIVERSAL CORNER PIECESATZE CODE

DESCRIPTION

CORNER PIECES FOR PLINTH H=100ATZE-A100CORNER PIECES FOR PLINTH H=200ATZE-A200

Note: for more information, assembly drawings and dimensional features, please check on page 217.

LOCKING SYSTEM WE

To order locking systems different from the standard one, check on page 67.

87 ATB8COMPLEMENTARY ACCESSORIES

CABLE ENTRY FOAM AND BOTTOM PLATE GASKET EGPT

The bottom of the enclosure is sealed by the use of a gasket on the cable entry section of the bottom plates, guaranteeing a proper IP protection degree.To be mounted on ATB8 cable entry bottom.

CHARACTERISTICSGland plates manufactured from zinc sheet steel and provided with adhesive closed-cell gasket.

DELIVERYSupply includes nr. 2 pieces with mounting accessories.

DRAWING DESK WTRL

The desk provides a stable surface for documents, computer or measuring devices; it can be easily folded and locked within the door frame space. To be mounted directly onto the stiffening frame of ATB8 blank doors.

CHARACTERISTICSManufactured from 15/10 sheet steel.


DELIVERYSupply includes nr. 1 piece with mounting accessories.

DRAWING DESK WTRLWTRL CODE

CABINET DIMENSIONS

600800

WTRL000600WTRL000800

WTGS-003

Zincpassivated M12 lifting eyebolts.

DELIVERYSupply includes nr. 2 pieces with nuts and washers.

Available on request.

MICROSWITCH WI100ATB8

Complying with standards IEC 337-VDE 0660.

DELIVERY Supply includes: microswitch, mounting bracket and screws.


CABINETS

atb8 monobloc cabinet

Documents