as 3830.4-1998 ferroalloys - specifications ferrosilicomanganese
TRANSCRIPT
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
1/7
AS 3830.41998
Australian Standard
FerroalloysSpecifications
Part 4: Ferrosilicomanganese
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
2/7
This Australian Standard was prepared by Committee MN/6, Ferroalloys. It wasapproved on behalf of the Council of Standards Australia on 12 June 1998 andpublished on 5 August 1998.
The following interests are represented on Committee MN/6:
Australasian Institute of Mining and Metallurgy
Australian Foundry InstituteBureau of Steel Manufacturers of Australia
The Royal Australian Chemical Institute
Steel Reinforcement Institute of Australia
Revie w of Austra lian Stand ards. To keep abreast of progress in industry, Australian Standards aresubject to periodic review and are kept up to date by the issue of amendments or new editions asnecessary. It is important therefore that Standards users ensure that they are in possession of the latestedition, and any amendments thereto.Full details of all Australian Standards and related publications will be found in the Standards AustraliaCatalogue of Publications; this information is supplemented each month by the magazine The
Aust ralia n Stan dard, whic h subsc ribin g memb ers receive , and whic h give s deta ils of new publ icati ons,new editions and amendments, and of withdrawn Standards.Suggestions for improvements to Australian Standards, addressed to the head office of Standards
Aust ralia , are welco med. Noti ficat ion of any inacc uracy or ambig uity foun d in an Austr alian Stan dardshould be made without delay in order that the matter may be investigated and appropriate action taken.
This Standard was issued in draft form for comment as DR 97477.
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
3/7
AS 3830.41998
Australian Standard
FerroalloysSpecifications
Part 4: Ferrosilicomanganese
First published as AS 3830.4 1998.
Published by Standards Australia(Standards Association of Australia)1 The Crescent, Homebush, NSW 2140
ISBN 0 7337 2092 7
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
4/7
AS 3830.4 1998 2
PREFACE
This Standard was prepared by the Standards Australia Committee MN/6, Ferroalloys to
provide specifications for ferrosilicomanganese.In preparing this Standard, reference was made to the following international Standards:
ISO 5447:1980 Ferrosilicomanganese Specification and conditions of delivery
ASTM A922-93 Specification for Silicon Metal
JIS G 2304-1986 Silicon-manganese
ISO 5447 is a very general document having limited commercial application to theAustralian industry. The following particular points are of relevance:
(a) Chemical analysis for the major elements, in this case manganese and silicon, mustcomply with specified concentration ranges. Material that does not fall within these
concentration ranges warrants a complaint. The ISO standard refers only to nominal
target concentrations.
(b) Many clauses of ISO 5447 make mention of agreements between the parties
concerned. Such statements in relation to the specifications render the documentunacceptable as an Australian Standard.
(c) The general terminology in ISO 5447 is unacceptable. Terms such as preferably;
other methods; may be used; may be agreed detract from the reasons for preparing
specifications.
The objective of this Standard is to prepare an appropriate Australian document which
clearly defines specifications and test methods to be used and reflects the real needs of
producers, traders and customers in the ferroalloys industry of Australia.
Copyright STANDARDS AUSTRALIA
Users of Standards are reminded that copyright subsists in all Standards Australia publications and software. Except where theCopyright Act allows and except where provided for below no publications or software produced by Standards Australia may bereproduced, stored in a retrieval system in any form or transmitted by any means without prior permission in writing fromStandards Australia. Permission may be conditional on an appropriate royalty payment. Requests for permission and informationon commercial software royalties should be directed to the head office of Standards Australia.
Standards Australia will permit up to 10 percent of the technical content pages of a Standard to be copied for useexclusively in-house by purchasers of the Standard without payment of a royalty or advice to Standards Australia.
Standards Australia will also permit the inclusion of its copyright material in computer software programs for no royaltypayment provided such programs are used exclusively in-house by the creators of the programs.
Care should be taken to ensure that material used is from the current edition of the Standard and that it is updated whenever theStandard is amended or revised. The number and date of the Standard should therefore be clearly identified.
The use of material in print form or in computer software programs to be used commercially, with or without payment, or incommercial contracts is subject to the payment of a royalty. This policy may be varied by Standards Australia at any time.
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
5/7
3 AS 3830.4 1998
CONTENTS
Page
1 SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 REFERENCED DOCUMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4 CONSTITUTION OF CONSIGNMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5 CHEMICAL COMPOSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6 PRODUCT SIZING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 PACKAGING, TRANSPORTATION AND STORAGE . . . . . . . . . . . . . . . . . 5
8 TESTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9 COMMERCIAL ASPECTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
6/7
AS 3830.4 1998 4
STANDARDS AUSTRALIA
Australian Standard
FerroalloysSpecifications
Part 4: Ferrosilicomanganese
1 SCOPE This Standard relates to the principal grade of ferrosilicomanganese
currently used in Australia, as shown in Table 1. The Standard specifies the key technicaland commercial requirements for the supply of this product.
Sampling methods for ferroalloys, precision and bias in relation to sampling offerroalloys, and methods of chemical analysis for selected ferroalloys, including
ferrosilicomanganese, are covered by AS 3586 Parts 1 to 4, and AS 3587 Parts 1 to 6.
2 REFERENCED DOCUMENTS The following documents are referred to in this
Standard:
AS
3586 Ferroalloys Sampling
3586.1 Part 1: Particulate alloys
3586.2 Part 2: Molten alloys
3586.3 Part 3: Preparation of samples
3586.4 Part 4: Determination of quality variation, precision and bias
3587 Ferroalloys Chemical analysis
3587.1 Part 1: Determination of silicon content of ferrosilicon and ferrosilicomanganese
3587.2 Part 2: Determination of manganese content of ferromanganese and ferrosilico-
manganese
3587.3 Part 3: Det erm ina tio n of c hro mi um co nt ent o f fe rr oc hr omi um an d
ferrosilicochromium
3587.4 Part 4: Determination of carbon content Infrared method
3587.5 Part 5: Determination of sulfur content Infrared method
3587.6 Part 6: Determination of phosphorus content Spectrophotometric method
ISO
4551 Ferroalloys Sampling and sieve analysis
3 DEFINITIONS For the purposes of this Standard, the definitions below apply.
3.1 Customerany party that purchases ferrosilicomanganese.
3.2 Ferrosilicomanganese an alloy consisting mainly of silicon, manganese and iron,
produced by reduction smelting of silicon, manganese and iron-bearing ores and slags, andused mainly in the manufacture of iron and steel.
3.3 Producer any party that operates a process to produce ferrosilicomanganese forsale to other parties.
3.4 Supplierany party that sells ferrosilicomanganese.
4 CONSTITUTION OF CONSIGNMENTS Ferrosilicomanganese shall be supplied in
consignments constituted by the graded lot method.
A consignment constituted by this method consists of a number of melts, or mixed parts
of a number of melts, of ferrosilicomanganese of a single grade.
COPYRIGHT
-
7/31/2019 As 3830.4-1998 Ferroalloys - Specifications Ferrosilicomanganese
7/7
This is a free preview. Purchase the entire publication at the link below:
Looking for additional Standards? Visit SAI Global Infostore
Subscribe to ourFree Newsletters about Australian Standards in Legislation; ISO, IEC, BSI and more
Do you need to Manage Standards Collections Online?
Learn about LexConnect, All Jurisdictions, Standards referenced in Australian legislation
Do you want to know when a Standard has changed?
Want to become an SAI Global Standards Sales Affiliate?
Learn about other SAI Global Services:
LOGICOM Military Parts and Supplier DatabaseMetals Infobase Database of Metal Grades, Standards and Manufacturers
Materials Infobase Database of Materials, Standards and Suppliers
Database of European Law, CELEX and Court Decisions
Need to speak with a Customer Service Representative - Contact Us
AS 3830.4-1998, Ferroalloys - SpecificationsFerrosilicomanganese
http://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/Details.aspx?ProductId=304716&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store/getpage.aspx?path=/InformationServices/shop/pages/ContactingUs.htm&utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/European-Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Materials/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/Metals/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Databases/LOGICOM/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Affiliate/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/StandardsWatch/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Law/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Collections/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://www.saiglobal.com/Information/Standards/Newsletters/?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSiteshttp://infostore.saiglobal.com/store?utm_source=PDF&utm_medium=Website_Infostore&utm_campaign=DocSharingSites