artefact series ii door furniture - keeler...

Artefact Series II Door Furniture

ASSA ABLOY, the global leader in door opening solutions

AAA-

CAT-

039

MS0

575

Keeler Hardwaretelephone +61 2 8966 5966 www.keelerhardware.com.au

Contents

Lockwood Door Furniture Handing Convention 2

Square Corner Plates 3

10mm Radius Corner Plates 5

Round End Plates 6

Square End Plates 7

Round Rose Furniture 8

Square Rose Furniture 9

218/219 10mm Radius Corner Push/Pull Plates 10



206/207 Series Push & Pull Plates 13

208/209 Series Push & Pull Plates 14

Pull Handles 15

Stainless Steel Pull Handles with Rose 16

Finishes 17

Limiting Dimensions for Lever/Knob Selections 18

Legend 19

Ordering Procedure 20


Lockwood Catalogue

1


The distinguished range of Artefact in Aluminium, Brass and Stainless Steel, offers architects and specifiers a complete range of slim line, door furniture plates.

Suitable for use in public, commercial, industrial and institutional buildings, where there is a need for high grade and durable fittings.

Artefact range of door furniture plates offers a selection of functions with engraving available to suit most requirements.

Lever

Plates

200 Series

Engraving

Pull Handle & Plates


2


1300 LOCK UP (1300 562 587) lockweb.com.au

Lockwood Door Furniture Handing ConventionApplicable for all Artefact Series II Plates.

ExternalLever Assembly

InternalLever Assembly



INSIDE

OUTSIDE

Right Hand Door Left Hand Door





INSIDE

OUTSIDE


InternalLever Assembly20305NN/96L

ExternalLever Assembly20201NA/96R


20201NA/96L

InternalLever Assembly20305NN/96R

INSIDE

OUTSIDE


Example


Lockwood Catalogue

3


Square Corner PlatesThe 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors.

Features & SpecificationsDimensions162 x 162 x 3mm – Aluminium 162 x 162 x 2mm – Stainless Steel and Brass

MaterialsAluminium, Brass and Stainless Steel

Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.

NOTE: When using flush pulls back to back the minimum door thickness is 40mm.

FinishesStandardNatural Anodised Aluminium NT Satin Stainless Steel SS

Non-Standard Refer to page 17

Ordering ProcedureThe 200 Series is ordered to suit right or left handed doors. It is necessary to specify the furniture plate and finish code, eg 20001NA/96LNT.

162 2 3

162

48.7

28.6SS/Brass Aluminium

Plates

Levers and Knob to Suit

Pull Handle to Suit

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED

Indicating Slotted Button

Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

20001NA

20022NN

20101NA 20120NANN41002NN30002 20004NN

NN70102NE70002 20007NN20007FN

20104NN

20139NN20005NN

20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75*20024NN/75* 20124NN/75*

20122NN20105NN

20020NA

20000NA 20100NA 20006NN 20106NN 20013NN 20138NNAN01002NN20002

20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN

20007AN 20007CN

20134NN

*5857 1611 12Stainless SteelAluminium

20 89698*8 *Aluminium Only

Brass levers and knobs also available refer page 18.


4




Lockwood Catalogue

5


10mm Radius Corner PlatesThe 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors.


MaterialsAluminium, Stainless Steel and Brass.


NOTE: When using flush pulls back to back the minimum door thickness is 40mm.

FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS


Ordering ProcedureThe 202 Series is ordered to suit right or left handed doors. It is necessary to specify the furniture plate and finish code, eg 20201NA/96LNT.

162 2 3

162

48.7

28.6 SS/Brass Aluminium

Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

20201NA 20220NA20301NA 20320NANN41202NN30202 20204NN

20207NN 20307NN20207FN20207AN 20207CN 20207EN

20304NN

20339NN20205NN

20225NA/16* 20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16*20224NN/16* 20324NN/16*

20322NN20305NN 20222NN

20210NA NN83302NN31202NN60302AN00302AN00202 20202NN 20206NN

AN23302NN13202*/NG42202*/NE42202*/NC42202*/NA42202 20232NA NN43202NN53202NN1330216 16 16 16


Pull Handle to Suit





6



Round End PlatesThe 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches.


MaterialsAluminium, stainless steel or brass.




Ordering ProcedureThe 212 Series is a non-handed plate, however consideration to handing must be given to lever selection. It is necessary to specify the furniture plate and finish code, eg 21201NA/96SS.

50

162

2 3

SS/Brass Aluminium

Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

21200NA 21300NA 21206NN 21306NN 21207NN 21307NN 21213NN 21338NN21210NA21202NN

NN40312NN40212NN30212AN10312AN10212 21205NN 21305NN

21220NA 21320NA 21222NN 21322NN

21214NN 21339NN


Pull Handle to Suit





Lockwood Catalogue

7


Square End PlatesThe 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches.

Features & SpecificationsDimensions162 x 162 x 2mm – Stainless Steel

MaterialsStainless Steel only.


FinishesStandardStainless Steel SS


Ordering ProcedureThe 224 Series is a non-handed plate, however consideration to handing must be given to Lever Selection. It is necessary to specify the furniture plate and finish code, eg 22401NA/96SS.

50

162

2 3

Stainless Steel

Plates


Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

22400NA 22500NA 22406NN 22506NN 22407NN 22507NN 22413NN 22538NN22410NA22402NN

NN402NN402NN302AN1025 252AN1024 24 242 22405NN 22505NN

22420NA 22520NA 22422NN 22522NN

22414NN 22539NN

20 8969


Pull Handle to Suit



8



2 355

SS/Brass Aluminium

Round Rose FurnitureThe 260 Series Door Furniture has a 55mm Round Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 tubular latches.

Features & SpecificationsDimensions55 x 3mm – Aluminium 55 x 2mm – Stainless Steel and Brass

Materials

Aluminium, stainless steel or brass.



Non-Standard Refer to page 17.

Ordering ProcedureThe 260 Series may be ordered as a set to suit right or left hand doors. It is necessary to specify the furniture rose and finish code, eg 260/261/96SS.

Rose Furniture 55mm Diameter


Cylinder Hole

Turn-Snib

Slotted Button

Disabled

Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

280 281 286282 287

260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank

Escutcheon Furniture 50mm Diameter

20 89698*8*Aluminium Only



Lockwood Catalogue

9


Square Rose FurnitureThe 260SQ Series Door Furniture has a 55mm x 2mm Square Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 tubular latches.

Features & SpecificationsDimensions55 x 55 x 2mm – Stainless Steel

MaterialsStainless Steel only.


FinishesStandardStainless Steel SS

Non-Standard Refer to page 17.

Ordering ProcedureThe 260SQ Series may be ordered as a set to suit right or left hand doors. It is necessary to specify the furniture rose and finish code, eg 260/261/SQ90SS.

Square Furniture 55 x 55mm


Cylinder Hole

Turn-Snib

Slotted Button

Disabled

Legend

FIRE RATED

S3 HIGH SECURITY

DURABILITY

ANTI-CORROSION

280 281 286282 287

260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank

Square Escutcheon Furniture 50 x 50mm

20 89698*8


2 355

Stainless Steel


10


218/219 10mm Radius Corner Push/Pull PlatesThe 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors.

Features & SpecificationsDimensions250 x 50 x 2mm.

MaterialsStainless steel or brass.


EngravingOptions are available as indicated on the right.

FinishesStandardSatin Stainless Steel SS Non-Standard Refer to page 17

Ordering ProcedureThe 218 Series is non-handed (except where the disabled turnsnib in used). It is necessary to specify the furniture plate and finish code, eg 21825EA/16SS.

Function/Handle SelectionCertain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function.

Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

21800NA 21900NA 21802NN NN83912NN31812NN70912NN70812NN60912NN60812

21825NA/* 21925NA/* 21827NN/* 21927NN/* 21824NN/* 21924NN/* 21826NN/* 21828NN/* 21942NN/*

21807AN 21824BN/* */NG42812NF7081221807EN21807BN 21807CN 21824DN/*21807DN

D Handle Selections

Stainless Steel 19mm 16 17 18

Brass 16mm 05 07 08

Centres 108mm 152mm 203mm

Handle Numbers 07 and 08 are also available in Stainless Steel.

Function Description No Engraving

With Engraving

24 Pull Handle Only 203mm 152mm

25 Pull Handle & Cylinder 152mm 108mm

26 Pull Handle & Emergency Turn 152mm 108mm

27 Pull Handle & Turn Knob 152mm 108mm

28 Pull Handle & Privacy Indicator Emergency Turn

152mm 108mm

29 Pull Handle & Privacy Indicator Turn Knob

152mm 108mm

30 Pull Handle & Dual Cylinder × ×

42 Pull Handle & Disabled Turn 108mm ×

43 Pull Handle & Privacy Indicator Disabled Turn

108mm ×

44 Pull handle only – Offset from bottom

108mm, 152mm

108mm, 152mm

NOTE: x indicates this function is not available in this configuration.


Lockwood Catalogue

11


216/217 10mm Radius Corners Push/Pull PlatesThe 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors.




FinishesStandardSatin Stainless Steel SS Non-Standard Refer to page 17



.

Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

21600NA

21625NA/*

21607AN

21700NA

21725NA/*

21607BN

21606NN

21627NN/*

21607CN

21706NN

21727NN/*

21607DN

21607NN

21624NN/*

21607EN

21707NN

21724NN/*

21607FN

21602NN

21626NN/*

21624BN/*

21613NN

21628NN/*

21624DN/*

21738NN

21742NN/*

21624GN/*

Handle Numbers 07, 08 and 10 are also available in Stainless Steel.

D Handle Selections

Stainless Steel 19mm** 16 17 18 19

Brass 16mm 05 07 08 10

Centres 108mm 152mm 203mm 250mm


With Engraving






203mm 152mm


203mm 152mm


42 Pull Handle & Disabled Turn 152mm 108mm


152mm 108mm


108mm, 152mm, 203mm

108mm, 152mm, 203mm



12


214/215 10mm Radius Corner Push/Pull PlatesThe 214 Series Door Furniture is 300 x 100 x 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.

ApplicationDesigned for use with 3570 Series Mortice Locks.




FinishesStandardSatin Stainless Steel SS




Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

21400NA 21500NA 21406NN 21506NN 21407NN 21507NN

21425NA/* 21525NN/* 21427NN/* 21527NN/* 21424NN/* 21524NN/*

21407AN 21407CN 21407EN 21407FN21407BN 21424BN/* 21424DN/*21407DN 21424GN/*

21402NN 21413NN 21538NN

21426NN/* 21428NN/* 21542NN/*

D Handle Selections

Stainless Steel 19mm** 16 17 18 19

Brass 16mm 05 07 08 10

Centres 108mm 152mm 203mm 250mm


With Engraving






203mm 152mm


203mm 152mm


42 Pull Handle & Disabled Turn 152mm 108mm


152mm 108mm


108mm, 152mm, 203mm

108mm, 152mm, 203mm


Handle Numbers 07, 08 and 10 are also available in Stainless Steel.


Lockwood Catalogue

13


206/207 Series Push & Pull PlatesThe 206/207 Series Door Furniture are 2mm thick stainless steel plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.



MaterialsStainless steel.



Non-Standard Powdercoat PC

Ordering ProcedureThe 206/207 Series is ordered to suit right and left handed doors. It is necessary to specify the furniture plate and finish code, eg 20625NA/18RSS.

Plates

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

20607NN 20707NN20600NA 20700NA 20624NN/18

20724NN/18 20625NA/18 20725NA/18

20610NA

20824NN/1920807NN 20907NN 91/AN5290291/NN42902AN00902AN00802 20810NA 20825NA/19

D Handle Selections

Stainless Steel 19mm 18

Brass or Stainless Steel 16mm 08

Centres 203mm


14



208/209 Series Push & Pull PlatesThe 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.



MaterialsStainless steel.



Non-Standard Powdercoat PC

Ordering ProcedureThe 208/209 Series is ordered to suit right and left handed doors. It is necessary to specify the furniture plate and finish code, eg 20825NA/19RSS.

Cylinder Hole

Turn-Snib

Slotted Button

Disabled

LED


Legend

20607NN 20707NN20600NA 20700NA 20624NN/18

20724NN/18 20625NA/18 20725NA/18

20610NA

20824NN/1920807NN 20907NN 91/AN5290291/NN42902AN00902AN00802 20810NA 20825NA/19

Plates

D Handle Selections

Stainless Steel 19mm 19

Brass or Stainless Steel 16mm 10

Centres 250mm


Lockwood Catalogue

15


Pull HandlesAll pull handles are designed for single handle application and can be used with Lockwood pull plates and roses.

Features & SpecificationsFixingHandles are concealed fixed. If ordered with Lockwood pull plates or roses, handles are screw fixed to plates.

MaterialsBrass and Stainless Steel where shown.

Handle No. Length Diameter Projection Fixing Centres Finger Clearance01 117 22 35 108 25

02 162 22 35 152 25

03 212 22 35 203 25

Limiting Dimensions

Limiting Dimensions

Handle No. Length Diameter Projection Fixing Centres Finger Clearance38 248 16 Base: 54 152 38

Top: 73

Limiting Dimensions

Designed for single handle applications for hospitals, disabled and aged care facilities. Material Solid brass.

Handle No. Length Diameter Projection Fixing Centres Finger Clearance

Brass Stainless Steel

04 120 13 45 108 32 ✓ ✕

05 124 16 48 108 32 ✓ ✕

06 165 13 45 152 32 ✓ ✕

07 168 16 48 152 32 ✓ ✓

08 219 16 48 203 32 ✓ ✓

09 222 19 54 203 35 ✓ ✓

10 269 19 54 250 35 ✓ ✓

16 127 19 54 108 35 ✕ ✓

17 171 19 54 152 35 ✕ ✓

18 222 19 54 203 35 ✕ ✓

19 269 19 54 250 35 ✕ ✓


16



Stainless Steel Pull Handles with RoseDesigned for single or double handle applications.

Features & SpecificationsDoor Thickness Double Handle Application. Fixing screws suit door thickness up to 45mm.



Handle No. Length Diameter Height Centre Finger Clearance17 171 19 64 152 46

18 222 19 64 203 46

19 269 19 64 250 46

Limiting Dimensions for Roses 1360, 1370, 1220 Series

Limiting Dimensions for Roses 260 Series

Handle No. Length Diameter Height Centre Finger Clearance

17 171 19 64 152 35

18 222 19 64 203 35

19 269 19 64 250 35

SS, Brass


Lockwood Catalogue

17


FinishesStandard FinishesSatin Stainless Steel SS Natural Anodised Aluminium NT

Non-Standard FinishesPolished Brass PB Polished Stainless Steel PS Powdercoat PC

Limiting Dimensions for Lever/Knob Selections

20 88 96 98

96 98

20 88 96 98

96 98

Aluminium

Stainless Steel

50279 Dulux Wedgewood Satin

33344 Dulux Horizon Blue Gloss

36603 Dulux Azure Grey Satin

32786 Dulux APO Grey Satin

36858 Dulux Oyster Matt

81880 Dulux Special White Gloss

33704 Dulux Tropics Gloss

32538 Dulux Stone Beige Matt

33149 Dulux Red Earth Gloss

51032 Dulux Old Mauve Satin

33662 Dulux Pottery Satin

32774* Dulux Claret Satin

81794* Dulux Deep Cherry Red Gloss

50068* Dulux Deep Brunswick Green Gloss

32694* Dulux Black Gloss

19319* Dulux Black Matt

32999* Dulux Charcoal Gloss

19930* Dulux Anodic Bronze Satin

52052* Dulux Black Onyx Gloss

18796* Dulux Charcoal Metallic Gloss

51275 Dulux Anotec Dark Grey Matt

The colours represented on this chart are as close to the actual colours as modern printing processes allow. * Technical advice should be sought, where severe ultraviolet exposure conditions exist.Note: Consideration should be given to match Cylinder Finish.

Dulux Powdercoat Range


18



38

17

15.9

112

120

38

17

15.9

112

120

6.839.5

25

103

115

6.5

45

22

110

121

00 Lever

Intermezzo 41

Veloce 53

Lever 70Lever 62

Tenor 79

Lever 91

20 Knob

Arpeggio 44

Lever 55

Tempo 71

Lever 79B

Lever 94

32 Lever

Sonata 45

Overture 59

Ving 74

Lever 80

Chorus Line 97

40 Knob

Nocturne 48

Soprano 61

Cadenza 78

Lever 90

17.5

45

113

123

60.5

50

17.5

40.5

95.3

107.5

42

48

124

50

22.2

103

28.5

112.5

123

6127

40

109.5

120

21

49

40

120

130

104

17.5

47

125

17

44.5

117.5

107

114

44

2852.517.2

125

36

15.9

113

121

50

17

110

118

33.5

109120

DAINTREE - dimensionals BRASS - dimensionals

DAINTREE - price book style BRASS - price book style

1038

124

116

26

114.3

123

349

6.839.5

25

106

118.5



1038

124

116

26



1038

118

109

26

Limiting Dimensions for Lever/Knob Selections

55

25

13

115

127.5


Lockwood Catalogue

19


Legend

Fire Rated

FIRE RATEDLockwood Artefact Door Furniture has been successfully fire tested up to 4 Hours (depending on the type of fire door) on fire door assemblies, in accordance with Australian Standard AS 1905.1 – 1997, Part 1: Fire-resistant doorsets.

SecurityS3 HIGH SECURITY

All Lockwood Artefact Door Furniture conforms with level S3 (Physical Security) Australian Lock Standard. (Standard Number AS 4145.2: 1993).

DurabilityDURABILITY

All Lockwood Artefact Door Furniture conforms with level D3 (Durability) Australian Lock Standard (Standard Number AS 4145.2: 1993).

Corrosion ResistanceANTI-CORROSION

This product has been successfully tested in accordance with AS 2331-3.1: 1980. Neutral Salt Spray Test (NSS TEST).

Functions

Slotted Button Indicating Slotted Button Disabled Turn Snib Flush Pull Turn Snib

Standards

Concealed Fixed Visible FixedConcealed

Fixed Visible FixedConcealed

Fixed Visible Fixed

Plates


20



Plate Type

200

Plate Function

01

Engraving

N

Cylinder Shape

A

Lever/ Knob

96

Handing

L

Finish

SS

Plate Type

Exterior Plate (162 x 162) – Square Corners 200

Interior Plate (162 x 162) – Square Corners 201

Exterior Plate (162 x 162) – Radius Corners 202

Interior Plate (162 x 162) – Radius Corners 203

Exterior Plate (250 x 200) 206

Interior Plate (250 x 200) 207

Exterior Plate (324 x 162) 208

Interior Plate (324 x 162) 209

Exterior Plate (162 x 50) – Oval 212

Interior Plate (162 x 50) – Oval 213







Exterior Plate (162 x 50) – Rectangular 224

Interior Plate (162 x 50) – Rectangular 225

Plate Function

Cylinder Only 00

Cylinder & Lever 01

Emergency Turn Only 02

Emergency Turn & Lever 03

Turn Knob & Lever 04

Lever Only 05

Turn Knob Only 06

Plain Plate 07

Cylinder & Fixed Lever 08

Fixed Lever Only 09

Dual Cylinder 10

Privacy Indicator Emergency Turn Only 13

Privacy Indicator Emergency Turn & Lever 14

Privacy Indicator Turn Knob Only 15

Privacy Indicator Turn Knob & Lever 16

Cylinder, Lever & LED 20

Cylinder, Fixed Lever & LED 21

Lever & LED 22

Cylinder & LED 23

Pull Handle Only 24

Pull Handle & Cylinder 25

Pull Handle & Emergency Turn 26

Pull Handle & Turn Knob 27

Pull Handle & Privacy Indicator Emergency Turn 28

Pull Handle & Privacy Indicator Turn Knob 29

Pull Handle & Dual Cylinder 30

Flush Pull Only 31

Flush Pull & Cylinder 32

Flush Pull & Emergency Turn 33

Flush Pull & Turn Knob 34

Flush Pull & Privacy Indicator Emergency Turn 35

Flush Pull & Privacy Indicator Turn Knob 36

Flush Pull & Dual Cylinder 37

Disabled Turn Only 38

Disabled Turn & Lever 39

Privacy Indicator Disabled Turn 40

Privacy Indicator Disabled Turn & Lever 41

Pull Handle & Disabled Turn 42

Engraving

A – G Outlined Infill R – X Full Infill

Male symbol A R

Male text B S

Female symbol C T

Female text D U

Disabled symbol E V

Push text F W

Pull text G X

Unisex symbol H Y

No option N

Miscellaneous text* P

Corporate Engraving** Q * Separate charge per letter** Separate charge per logoFor all in-filled engraving, black gloss is the standard.

Cylinder Shape

Oval Cylinder – 32mm (H) x 18mm (W) Lockwood 570 Cylinders A

Guarded Oval Cylinder – 32mm (H) x 18mm (W) Lockwood 570 Cylinders B

No Cylinder Function N

Lever/ Knob Type

Brass Levers and Knobs

00 53* 7820 55 7932 59 79B40 61* 8041* 62 9044 70 9145 71 94*48* 74 97

Stainless Steel Levers

96 98

Aluminium Levers/Knobs

20 88 9698

Brass Pull Handles

01 02 0304 05 0607 08 0910

Stainless Steel Pull Handles

07 08 0910 16 1718 19

Aluminium Pull Handles

75

* Denotes handed levers

Handing

Left LRight R

Finish

Stainless Steel Finishes

Satin Stainless Steel SS

Polished Stainless Steel PS

Powdercoat PCAluminium Finishes

Natural Anodised NT

Brass Finishes

Polished Brass PB

2000 Series

Ordering Procedures

/


Lockwood Catalogue

21


Exterior Rose Type

260

Escutcheon

280

Interior Rose Type

261

Rose Shape

SQ

Lever/ Knob

96

Rose Shape

SQ

Finish

SS

Handing Finish

SS

Plate Type

Exterior Rose Type 260

Exterior Round Blank Rose 262

Exterior Round Rose – Fixed Lever 264

Plate Function

Interior Round Rose 261

Interior Round Blank Rose 263

Interior Round Rose – Fixed Lever 265

Rose Shape

Round –

Square SQ

Lever/ Knob Type

Brass Levers and Knobs

00 53* 7820 55 7932 59 79B40 61* 8041* 62 9044 70 9145 71 94*48* 74 97

Stainless Steel Levers

96 98

Aluminium Levers/Knobs

20 88 9698

* Denotes handed levers

Handing

Left LRight RNon Handed –

Finish




Powdercoat PCAluminium Finishes

Natural Anodised NT

Brass Finishes

Polished Brass PB

Escutcheon

Oval Cylinder Escutcheon – 32mm (H) x 18mm (W) Lockwood 570 Cylinders 280

Turn Knob Escutcheon 281

Emergency Turn Escutcheon 282

Disabled Turn Knob Escutcheon 286

Euro Profile Cylinder Escutcheon 287

Rose Shape

Round –

Square SQ

Finish




Powdercoat PC

Aluminium Finishes

Natural Anodised NT

Brass Finishes

Polished Brass PB

260 Series

206 Series

Ordering Procedures

/ /

Specification Service

For all Architectural hardware specification assistance refer to your local ASSA ABLOY Sales Office.

A fully comprehensive, obligation free, Architectural Door Hardware specification can be prepared by Architectural Hardware Representatives.

Product Caring

Please go to lockweb.com.au for details on product caring.

Quality Endorsed Company

SAI Global operates a program which assesses the quality procedures and capabilities of an organisation in termsof the requirements of specific Australian and International Standards

for Quality Systems. Following assessment by SAI Global, ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh VIC 3166 have been granted a certificate of registration as a quality endorsed company complying with the requirements of AS 3902/ISO 9001 – Quality Systems for Production and Installation.

DisclaimerWhilst every effort has been made to ensure that the information contained in this catalogue is accurate at the time of publication, ASSA ABLOY recommends that you consult ASSA ABLOY or its agents prior to placing an order to ascertain current information on specific products, as ASSA ABLOY reserves the right to make changes without notice. ASSA ABLOY will not be liable for any injury, loss or damage whatsoever, arising from any errors or omissions in the information contained in the catalogue or arising from the use or application of the information contained herein. This catalogue does not constitute an offer for the sale of any particular product.

Lockwood Guarantee Please go to lockweb.com.au for full details of the Lockwood Guarantee.

Quality ISO 9001

EnvironmentISO 14001


Headline

ASSA ABLOY, the global leader in door opening solutions

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America.

As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.

Australia 1300 LOCK UP (1300 562 587) lockweb.com.au

New Zealand Telephone +64 9415 7888assaabloy.co.nz

ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2009

ASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia

[email protected]

ASSA ABLOY New Zealand Ltd. 6 Armstrong RoadAlbany, North Shore City, 0632New Zealand

[email protected]

AAA-

CAT-

039

MS0

575


artefact series ii door furniture - keeler...

Documents