Arduino based Trainer kit including IOT applications

The trainer kit enables the students to use Arduino, Shield and add on boards to

develop and implement real time applications.

The trainer kit consists of working models, hardware and Graphical user Interface (GUI)

software with application programs to learn, develop and implement the following applications.

1a. Movement detector

1b. Temperature controller

2. Water level Monitor and controller

3. Real time Digital clock

4. 4 axis robot

5. Colour sorter

6. Analog meter like display (320 x 240 pixels)

7. Heart Pulse Monitor

8. Home automation

9. GPS

10. Web based interfaces

Contents of the Kit

General Hardware:

Arduino board with bread board and +5V power supply – 10 nos.

1a. PIR Sensor and relay board

1b. Electric kettle with DS18B20 temperature sensor board

2. Sump, water tank, pump, solenoid valve, low and high level

sensors and ultrasonic sensor to measure the water level

3. P10 LED board having 64x16 LEDs and RTC add on

4. 4 axis robot using RC servo motors

5. Colour sorter with RC servo, stepper motor and colour sensor

6. 320x240 pixels colour Graphics display and hall sensor for

analog like digital ammeter circuit

7. Heart rate pulse sensor with OLED display

8. Ethernet shield and relays with four lamps

9. GPS module with shield

10. PHPOC wifi shield, rotary encoder, single digit dot matrix display

and joy stick Motion Detection and Temperature Controller

Web Arduino Dynamic Gauge

Web Based Remote KeypadHeart Pulse Monitor

P10 Display Digital Clock

Colour Sorter4 Axis Robot

Water Level Monitor

Home Automation

GPS

Analog Meter