april 2019 1/2 retrofit applications - concept€¦ · retrofit applications - dimensions h3 1000j...
TRANSCRIPT
Valor Fireplaces • 190—2255 Dollarton Highway • North Vancouver, BC • V7H 3B1Tel: 604.984.3496 or 1.800.468.2567 • Fax: 604.984.0246 or 1.800.268.0333
www.valorfireplaces.com
April 20191/2
Retrofit Applications - ConceptH3 1000J
Existing wall finish (combustible or non-combustible)
Existing combustible framing
Existing combustible header
Existing hearth or floor. May be combustible material provided it is no higher than the base of the appliance.
Required trim
Backing plate (with ventilation slot)
Note: Installers to verify all clearances to existing combustible materials are adequate before installing this appliance.
Remote handset wall holder
Wall switch1000J heater
Top or rear venting
Mantel (see Installation Manual)
The Reduced Clearance versions of the H3 backing plates are specifically designed for retrofit applications where an existing fireplace is being removed, and the existing wall finish and cavity remain. These backing plates incorporate a ventilation slot that allows for a lower combustible header height of 33”, and combustible wall finishes from 31” of the base of the appliance. Reduced Clearance backing plates DO NOT ADJUST for additional finishes applied later.
Valor Fireplaces • 190—2255 Dollarton Highway • North Vancouver, BC • V7H 3B1Tel: 604.984.3496 or 1.800.468.2567 • Fax: 604.984.0246 or 1.800.268.0333
www.valorfireplaces.com
April 20192/2
Retrofit Applications - DimensionsH3 1000J
23-7
/16”
[596
mm
]
31-1
/8” [
791
mm
]ElectricalInlet Point
Optional 1270RBK Remote Blower Kit outlet
Gas LineAccess Point
Optional 1270RBK Remote Blower Kit outlet
Stand-Offs
CenterLine
4 x 6-5/8” dia.venting
Header
6-5/8” dia. Ventingfield-convertiblefrom top to rear outlet
Center of vent
1-1/2”[38 mm]
3-5/16”[85 mm]
9-1/
2”[2
42 m
m]
15”
[381
mm
]
28-7
/16”
[722
mm
]
17-3
/8” [
441
mm
]
34-1/16” [865 mm]
35-13/16” [909 mm]
23-1/4” [590 mm]
27-7/8” [709 mm]
33” [
838
mm
]M
inim
um h
eade
r hei
ght
Front ViewLeft Side View Right Side View
Top View