ap&ac system development 2014
TRANSCRIPT
AP-AC System Development
Auditorium Network
Meeting Room Network
Dormitory Network
Roaming Network
Residence Life
POE and Hardware Specifications
Over-all description HiAP-99 is a unique tiny form factor AP specially designed for dormitory, classroom,
exhibition hall, conference room, office, and locations that demanding dense WiFi
usage by large population. Several ISPs can co-locate in a HiAP-99.
HiAP-99 provides up to 3 SSIDs with each connecting to a VLAN to respective ISP.
A Fast Ethernet 100TX interface aggregates all traffic to/from back haul AC HiAP-99
features load balance, and universal ISP SSID.
It can be deployed in wall-mount, ceiling-mount, pole-mount, and other customer
specified form. Typical deployment will be an integrated module that replacing wall
RJ45 socket outlet.
The integrated module will add extra WLAN with above function along with original
RJ45 Ethernet connection.
A complete system includes small AP (HiAP-99), small AC (SmAC-11), and PoE
(PoE-11/PoE-12), and optional intermediate L2/L3 switch.
Hardware specifications
Input power : PoE at wire# 4,5,7,8 , DC 5.5~48V 5W max
WiFi board : AR9331 board with dual line pin connector.
DC-DC board : Convert PoE power to DC3.3V for AR9331 board.
Software Specification: AP
Overall description
Our system is an advanced operation system capable of power wireless and multiple wireless LAN features, built upon a simple and intuitive user interface foundation. Our system includes the following features:
Multiple virtual local area network support. Dynamic Access Control List management Custom channel & bandwidths System syslog Firmware upgrade Up to 3 virtual local area networks support.
Software Architecture of AP AP web
Basic configuration
DHCP
MTU
Static
Apply button
reboot button
Local IP setting
Local Netmask
DNS
Gateway IP
MTU
Wireless configuration
Channel
Essid
Txpower
Band Usage
Channel Width
Country
Distance
RTS-CTS
Beacon Interval
WLAN
vlanID
Status enable
disable
Essid
Channel
Band Usage
Channel Width
Macfilter
Maclist
Country
Maxclients
Security
No Encryption
WEP Open System
Used key
Clear
Apply
WEP Shared Key
Used key
Clear
Apply
WPA
cipher
auto
Force CCMP(AES)
Force TKIP
Force TKIP and CCMP(AES)
Used key
Clear
Apply
WPA2
cipher
auto
Force CCMP(AES)
Force TKIP
Force TKIP and CCMP(AES)
Used key
Clear
Apply
WPA/WPA2 Mixed Mode
cipher
auto
Force CCMP(AES)
Force TKIP
Force TKIP and CCMP(AES)
Used key
Clear
Apply
Load Balance
Firmware Update
System log
Firmware Version
Specifications of Wireless Interface
Frequency Channel : manual/auto, channel# 1~14 depending on country
Country : selectable : US, TW, CN, EU, JP, default US
Channel Width: 20MHz, 40MHz, auto
Transmission power Transmission power : 0~100% (0~17dBm)
Band Usage Band Usage: 11n only, 11bgn mixed,
11bg mixed, 11g only, 11b only
Radio security Open
Open/64/128 bit WEP
WPA
WPA2
WPA/WPA2
LAN interface IP Address : DHCP, static
Universal ISP SSID: User set SSID once for an ISP, use it to all AP, no need to
change SSID as long as not change ISP.
802.11 parameters RTS-CTS : threshold 1~2346
Distance : 0~25000 meters
Beacon interval : 1~100000 mini second
VLAN SSID-VLAN pair, max 3
SSID: max 32 characters
VLAN ID: 1~2047
Enable/disable
Access Filter MAC address filter (black list/white list)
Basic Configuration Setting
Advanced Functions
Access filter
Client limitation
Utility
Ping
System syslog
Site survey
Web interface setting
MTU setting
Local IP display and setting
Local netmask setting
Gateway IP setting
DNS IP display and setting
Configuration save and restore
Firmware upgraded by AC
Firmware version
Traffic Statistic
Site Survey
Traffic Statistic
Ping Connection
AP syslog
Remote Syslog
AP’s Software Version
AC Specifications
Overall Description
Our system is an advanced operation system capable of power
wireless and multiple wireless LAN features, built upon a simple and
intuitive user interface foundation. Our system includes the following
features: Multiple virtual local area network support.
Dynamic Access Control List management
Custom channel & bandwidths
System syslog
Firmware upgrade
Up to 3 virtual local area networks support.
Getting Started
Launch your Web browser. Enter the default IP address of your
device in the address field.
Upon initial login, the terms of use appear on the screen. Enter the
username (NAME) and password (PASSWORD) fields, and click
Login, see next Figure.
Before login the Web Management, the administrator with the highest
priority can change his/her password or adds some supervisors to
auxiliary manage the Web control setting.
Centralized management
Simplified LAN Deployment and management Platform.
Single point of management for the entire wireless network.
Configurable management multiple wireless LAN.
It integrates network management and data transmission to ensure a
mobile and efficient working environment.
Administrator can discovery, configure, monitor, and upgrade all
manageable access points form a single, centralized AP management
interface.
Detect Aps within the AC coverage to be alive or not.
Monitoring of the status of the network, wireless controllers,
WLANs, and clients.
It can effectively set wired or wireless AP via management interface.
Software Architecture of AC AC Web
AP Profile
AP Name
AP IP
Status
UP Time
Last Pulling Time
LAN
LAN
wakeup
sleep
Wireless
wakeup
sleep
AP Configuration
Basic configuration
DHCP
Static
Apply button
reboot button
Local IP seteing
Local Netmask
DNS
Wireless configuration
Channel
Essid
Txpower
Bandwidth Usage
Channel Width
Country
Distance
RTS-CTS
Beacon Interval
WLAN
vlanID
Status
enable
disable
Essid
Channel
Bandwidth Usage
Channel Width
Macfilter
Maclist
Country
Request list
Request AP status
Upgrade AP Firware
AP List (DHCP)
AP List (Upgrade)
AC log
Software Version
Time Setting
APs’ alive status
IP Collision between APs
Have been initiated by APself IP collision
Required AP’s Profile: Basic
Required AP’s Profile: Wireless
Required AP’s Profile: WLAN
Required AP’s Profile: Wireless Up/down
AP List with DHCP
Firmware upgrade to APs
Required AP’s syslog
Topology
Level 1 Level 3 Level 2 Level 4
MAC IP
Span next level Span all level
Load Balance & Seamless Handoff
Options
Advanced Features
Balance user count served among AP, automatically distribute busy
AP loading to other not so busy one.
Quality of Service
Topology & Routing
SNMP Implementation (with designed MIBs)
Anti-interference
CCI (co-channel interference)
ACI (adjacent interference)
ICI (inter-carrier interference)
AP-AP processing interference
High density Self-Organization
Quality of Service 1/2
Quality of Service 2/2