EASTERN

www.easternfirst.com

EASTERN LINE CARD

EASTERN

FASTENERS & GASKETS

• Wedge Anchors• Drop In Anchors• Sleeve Anchors• Center Pin Drive• Expansion Anchors• Drive Nails• Concrete Screws• Lag Shields• Hollow Wall• Drywall Anchors• Wedge Bolts• Epoxy• Sammy Screws

ANCHORS

• Threaded Anchors• Studs• L Bolts

WET SET CONCRETE ANCHORS

• Mild Steel• A193 B7• Grade 8• Acme• Stainless Steel• Brass

THREADED ROD

• A325 - A490 Tension Control (TCB) - Plain or Galvanized Finish

STRUCTURAL BOLTS

• Dowel• Spring Roll• Clevis• Cotter

PINS• Lynch• Hitch• Hairpin Cotter• Lock

• SAE• USS• F436• Fender

FLAT WASHERS• Brute• Bevel• Metric

• Split Lock• Internal Star• External Star

LOCK WASHERS• Hi Collar• Metric

• Drills• Dies• Taps• Masonry

CUTTING TOOLS• Hole Saws• End Mills• Industrial

Abrasives

• Pipe Plugs• Shaft Collars• Cable/Wire Ties• Hose Clamps

OTHER FASTENER PRODUCTS• Hex Keys• Helical Inserts &

Repair Kits

• Blind Rivets• Solid Rivets• Rivet Nuts

RIVETS• Specialty Rivets• Setting Tools

• Hex Head• Pan Head• Flat Head

SELF DRILLING SCREWS• Modified Truss• K Lath

• Pan Head• Flat Head• Hex Head• Hex Washer Head

TAPPING SCREWS• Tamper Proof• Type AB, Type A,

Type B, Type 25, Type F, Type 23

• Drywall Screws• Deck Screws• Type U

SCREWS• SEMS• Wood Screws

• Grade 8• Grade 5• Grade 2

HEX CAP SCREWS• Metric 10.9• Metric 8.8

• Pan Head• Flat Head• Round Head• Truss Head

MACHINE SCREWS• Oval Head• Hex Head• Metric• Tamper Proof

• Finish Hex Nuts• Structural Hex Nuts• Hex Jam Nuts• Nylock Nuts• T Nuts• Connector Nuts• Weld Nuts• Flange Nuts• Castle Nuts• Slotted Nuts• Keps Nuts

NUTS• Serrated Flange

Lock Nuts• Flex Lock Nuts• Coupling Nuts• All Metal

Lock Nuts• Wing Nuts• Acorn Nuts• Square Nuts• Metric

• Connector Bolts• Serrated Washer

Flange Bolts• 12-Point Counter-bore

Step Bolts• Elevator Bolts• Square Head Bolts

BOLTS• U-Bolts• Plow Bolts• Hex Tap Bolts• Hanger Bolts• Hex Lag Bolts• Flange Bolts• Carriage Bolts

• Socket Cap Screw• Flat Headed Socket

Cap Screw• Button Head Socket

Cap Screw• Socket Set Screw

SOCKETS• Square Head

Set Screw• Socket Shoulder

Bolts• Metric• Tamper Proof

GASKETS & EXPANSION JOINTS• Urethane• VF• Metal Expansion

Joints• Rubber Expansion

Joints• Valve & Pump

Packing

• Spiral Wound• Diaphragm• Cork• PVC• Gum• Red• Black• Tan Sponge

• Rubber• Teflon• Viton• Aflas• Buna-N• EPDM• Kalrez• Neoprene• Silicone

• Standard Cut Sheet Gaskets

• Special Cut Sheet Gaskets

• Non-Asbestos• Gore-Tex• Grafoil• Gylon• Metal

AUTHORIZED STOCKING DISTRIBUTOR

The Niron product from Eastern is manufactured with Advanced Beta Crystalline Polypropylene Random Copolymer (PP-RCT) which allows

for up to twice the pressure rating at higher temperatures. Eastern's Niron system is used in place of copper, steel, and other materials

at a lower installation cost. Produced since 1982 by Nupigeco, over 150,000 miles of pipe and fittings have been installed on five

continents.

Eastern is Niron's distributor in the Southeast with inventory and size ranges from 1/2" through 24" to support your projects.

A WIDE VARIETY OF APPLICATIONS

Widos machines offer safe, trouble- and waste-free pipe welds and are made for simple and easy operating. It will take away the performance pressure and increase the motivation of your team, lowering physical

stress with less noise and lower weight.

Eastern provides training to our customers. We can also provide specification assistance and project quotations. Eastern is stocking a significant inventory of pipe, fittings, and fusion equipment to support your projects and deliver installed cost savings. Eastern can sell or

rent the machine that meets your specific needs and train your team to use the equipment safely and efficiently.

• Hydronic Heating• Liquid Chemicals• Water: Chilled, Recycle,

Glycol and Brine• Compressed Air• Geothermal• HVAC

PIPE AND FITTING PRODUCT OVERVIEW

PLUMBING PRODUCTS

VALVESBALL VALVES

PLUMBING FIXTURESFAUCETS

LIGHTED MIRRORS AND MEDICINE CABINETS

TOILETS, URINALS, AND SINKS

PUMPS - MECHANICAL EQUIPMENT

WATER HEATERS

• 125# thru 2500#• 1/2" thru 36"• Carbon/Stainless/Brass/Cast Iron• Blinds/Slip-On/Weld Neck/

Lap Joints• Cast and Rolled Angle Face Rings

FLANGES/ANGLE FACE RINGS

• 1/8" thru 6"• Sweat and Threaded• 125#/250#

COPPER/BRASS FITTINGS

• 1/8" thru 20"• 150#/300#• Black/Galvanized

MALLEABLE FITTINGS

• 1/4" thru 24"• See NIRON

POLYPROPYLENE PIPE/FITTINGS

• 3" thru 60"• Single Wall (Soil-tight)• Double Wall (N-12 IB)• Lengths or Coils

CORRUGATED PIPE/FITTINGS

• 1-1/2" thru 15"• Service Weight• No Hub

CAST IRON SOIL PIPE

• Chem-Tite• Conley Composites

LINED/COATED PIPE

• Alloy 20/Alloy C-276• Chrome Molly P11/P22• Welded/Seamless• 1/2" thru 12"

SPECIAL ALLOY PIPE

• 1/2" thru 6"• See Transair

ALUMINUM PIPE

• Standard/X Heavy/Sch 40/Sch 80• 1/4" thru 36"• Black/Galvanized• Import/Domestic• High Yield

CARBON STEEL FITTINGS

• Welded and Seamless• 1/8" thru 36"• ASTM A403WP, WPX, CR A774• Sch 5, Sch 10, Sch 40, Sch 80• T304/304L and T316/316L Grades• 150# Cast and Merchant• 3000# Threaded and Socket Weld• Sanitary

STAINLESS STEEL FITTINGS

• Stainless/Carbon/Brass/Nylon• ASTM A269 Tubing• .035, .049, .065 Walls

TUBE AND COMPRESSION FITTINGS

• Welded/ERW/Seamless• 1/8" thru 36"• Black/Galvanized• Plain End / T & C / Beveled End• API-5L

CARBON STEEL PIPE

• Welded and Seamless• 1/8" thru 36"• ASTM A312, A778• Sch 5, Sch 10, Sch 40, Sch 80• T304/304L and T316/316L Grades

STAINLESS STEEL PIPE

• 1/8" thru 6"• Types M, L, K• Hard and Soft• Lengths or Coils

COPPER TUBE

• 1/4" thru 20"• Sch 40 and Sch 80• PVC/CPVC• PVDF• DWV (Drainage Waste Vent)

THERMOPLASTIC PIPE/FITTINGS

• Bronze/Stainless Steel/ Carbon Steel/Cast Iron

• Thermoplastic/Specialty Ball Valves

BUTTERFLY VALVES• Iron & High Performance Steel

STRAINERS MECHANICAL/PLUMBING GATE, GLOBE, CHECK VALVES

INDUSTRIAL GATE, GLOBE, CHECK, PRESSURE SEAL VALVES

• Forged Carbon/Stainless Steel

• Cast Carbon/Stainless Steel

INDUSTRIAL PLUG VALVES• HOMESTEAD PLUG VALVES

VALVE ACTUATORS

• Pneumatic• Bronze/Iron

• Electric

VALVE POSITIONERS• Pneumatic/Electropneumatic

VALVE SWITCHES• Mechanical/Proximity

SOLENOID VALVES

KNIFE GATE - DIAPHRAGM VALVES

ENGINEERED VALVES

Fabri-Knife Gate Valves®Dia-Flo® diaphragm valves

EPIC PRODUCTS

Advance Composite PTFE-Lined Piping System• Zero Corrosion Rate• 50ft Pipe Spool Lengths Available• Full Vacuum Rated• Pressures to 275 PSI• Temperature Rating on -40F to +300F

PUREFLEX DURCOR

CORROSION RESISTANT PRODUCTS BY

Carbon Steel and Stainless Steel PTFE-Lined Piping System• Patent-Pending PTFE Vent Tube Design Protects

Weep Holes from Corrosive Permeations• Aircraft Grade Epoxy Paint on OD and ID of Pipe• Full Vacuum Rated• Pressures to 275 PSI• Temperature Rating on -40F to +400F

CHEM-TITE

Fiberglass Reinforced Plastic Piping Systems• Epoxy Resin Systems• Vinyl Ester Resin Systems• Epoxy or Vinyl Ester Double Containment Systems• Furan Resin Specialty Systems > Aggressive Chlorinated

Solvents

CONLEY COMPOSITES

• Chem-Tite PFA Lined Ball Valve for Severe Duty• Chem-Tite PFA Lined Ball Check Valve for Severe Duty• Chem-Tite PTFE/PFA Lined Butterfly Valve for Severe Duty• Chem-Tite TFM Lined Plug Valve for Severe Duty• Chem-Tite PFA Lined Bullseye Sight Flow Indicator for

Severe Duty

CHEM-TITE PFA/PTFE LINED VALVES

• Metal Unlined (DI, CS, 316L, Alloy 20 & others available)• Metal Lined (soft rubber, hard rubber, neoprene, poly pro,

PVDF, ETFE & PFA)• Glass Lined (Borosilicate)• Solid Plastic (PVC, poly pro, PVDF & PFA)• Several Diaphragm Options• Manual and Automated

HILLS-MCCANNA DIAPHRAGM VALVES

• Ball Valves• Butterfly Valves• Swing Check and Ball Check Valves

COMPOSITE VALVES

PTFE Expansion Joints• Several Styles Available

ETHYLENE FLEXIJOINT

Ultra-pure and Chemical Resistant PTFE Hoses and Fittings• Rubber Covered Smooth Bore, Virgin & Conductive Liners• Braided Smooth Bore, Virgin & Conductive Liners• Braided Convoluted, Virgin & Conductive Liners• Threaded Ends; Cam-Lok Ends; Compression, Splice,

Buttweld Ends; Sanitary Ends; Flanged Ends• Wide Range of End Fitting Materials

PUREFLEX HOSES

• P Series: Heavy Duty Air Driven Diaphragm Pumps• iPC Series: Plug & Play Air Driven Diaphragm Pumps• State-of-the-Art Controllers: Complete Control & Monitoring

Solution for Your Pumping System• Pro-Flo Centrifugal Pump: Rugged & Reliable Lined

Hydraulic Pumps• Accessories: Pulsation Dampeners, Leak Detectors,

Sidekick™, Strainers, Inline Ball Valves, Pump Stands

RAMPART PUMPS

STEAM TRAPS & CONTROL VALVES INSTRUMENTATION

• Corrosion-free• Leak-free• Reduced pressure drops• Easy to install and modify• Lightweight product• No special tooling required• Installs 6x faster than traditional systems• Qualicoat Certified Coating• Clear air certified ISO-8573-1 Class 1.1.1• 10-year warranty• 1/2" (16.5mm) thru 6" (168mm)

Transair is an Aluminum quick-to-connect pipe system

Push-to-connect16.5mm 25mm & 40mm

Small

Double clamp-ring50mm & 63mm

Medium

Clamshell76mm 100mm

& 168mmLarge

• Sleeved Plug Valves• Lined Plug Valves• Lined Ball Valves• Lined Butterfly Valves• HF Alkylation Plug Valves – UOP Listed• Pneumatic & Electric Actuation

• Corrosion Resistant Industrial Valves• 1/2"-36", Flanged, Butt Weld,

Threaded, & Socket Weld• Gate, Globe, Swing Check Valves

150#-600#• CF8M, CF3M, CF8, CF3, CK20,

CG8M, CF8C, CN7M, CW12MW, CY40, CW6MC, N12MV, N7M, M35-1, CZ100, CD3MN and other materials

• Cryogenic and Stop Check Valves

TUBS, SHOWERS, AND MIXING VALVES

• Compressed Air• Inert Gas• Vacuum

Transair is suitable for:

• High-Density Polyethylene• 3/4" thru 54"• AWWA, ASTM, NSF

HDPE PIPE/FITTINGS

• 800#-2500# Forged SW, NPT, Flanged, & BW Gate, Globe, and Check Valves

• 150#-2500# Forged & Cast SW, NPT, Flanged, & BW Bellows Seal Valves

• 150#-2500# Forged Flanged & BW Pressure Seal Gate, Globe, & Check Valves

• API6A Valves• Fluicon Triple Offset Butterfly Valves

• Innovative Triple & Double Offset Butterfly Valve Solutions

• 2'-48", Class 150 thru Class 2500• Wafer, Lugged, DFSP, DFLP, BWE,

Hub, and many more end connections• CS, SS, and High Alloy offerings• Manual, Electric, Pneumatic, &

Hydraulic actuation capabilities• Double Block & Bleed / Double

Isolation Triple Offset Valve solutions

• Engineered Ball Valve Solutions• 1/2"-24", 150#-2500#, Flanged,

Threaded, Socket Weld, Wafer, Trunion, and Special Configurations

• Most alloys available, Live Loaded Packing, Metal Seats, Class V, VI, and zero leakage

• Steam Jacketed, Cryogenic, 3-way, and 4-way valves

• HT66 & HT99 high temperature & steam seat solutions

• Knife Gate Valves & Special Engineered Valves

• 2"-48", 150#-600#, Bi-directional, Uni-directional, & Resilient Seated

• Automated & Manual offered in CS, 304, 316, 317, 254/654SMO, Titanium, Hastelloy, and others alloys

• Scavenger & Square configurations• O-port Valves 2"-72"• HT65, HT1600, HCr72 & TICR-110,

VAC1 proprietary processes available corrosion & wear resistant

IRUELINE®VALVE CORPORATION