ANANT GUPTA Mobile: +918454970707; Email: anant11235@gmail.com

CAREER CONSPECTUS

• Around 2 year experience in civil engineering infrastructural projects working a Pavement Material and Design Engineer.

• Presently working with Larson And Toubro Infrastructure IC Ltd- EDRC, Mumbai

• Expertise in flexible and rigid pavement design, conducting structural evaluation of in-service flexible road pavements using Falling Weight Deflectometer (FWD), and performing mix designs for Hot Mix Asphalt (HMA) mixtures.

JOB CONTOUR

LARSON AND TOUBRO INFRASTRUCTURE IC –EDRC since August, 2014 Senior Design Engineer

Roles & responsibilities:

• Providing the pavement designs for flexible and rigid pavement and drafting the reports for the same.

• Evaluating structural condition of in-service flexible road pavements using data from FWD and performing the required pavement design for estimating overlay requirement.

• Reviewing mix design, for HMA mixes, performed at sites.

• Participating in pavement quantity estimation for pre-tender works.

• Reviewing engineering properties of various pavement materials and evaluating their applicability in highway construction.

PROJECTS HANDLED

JABALPUR LAKHNADON ROAD PROJECT Four Laning of Jabalpur Lakhnadon section of NH-7

Roles & Attainments:

• Performed structural evaluation for 81 km of in-service flexible road pavement by backcalculating elastic moduli, using the deflection data from FWD, and estimated the overlay requirement using the backcalculated moduli.

• Proposed the flexible pavement design for widening sections.

• Contributed to attainment of the approval for flexible pavement design report for strengthening & widening of Main Carriageway (MCW).

• Participated in pavement quantity estimation during the tendering stage of the project.

REWA KATNI JABALPUR ROAD PROJECT (Package I, II & IV) Four Lanning of Rewa-Katni-Jabalpur Section of NH -7 Roles & Attainments:

• Participated in structural evaluation of in-service flexible pavement stretch, having a total length of 35 km, using FWD.

• Participated in estimating the overlay requirement and drafting the flexible pavement design report for MCW.

GHOSHPUKUR SALSALABARI ROAD PROJECT (Package I) Rehabilitation and Upgradation to Four Laning of Ghoshpukur – Salsalabari Section of NH-31D

Roles & Attainments:

• Participated in design of pavements for MCW, Toll Plaza, Service Roads, Junctions and Wayside Amenities, and drafting pavement design reports for the same.

• Participated in pavement quantity estimation during the tendering stage of the project.

UNNAO LUCKNOW EXPRESSWAY PROJECT Development of Agra-Lucknow Access Controlled Expressway (Green Field Project)

Roles & Attainments:

• Contributed to incorporation of subgrade soil stabilization using cement and preparing construction methodology for the same.

• Reviewed the mix design for BC and DBM mixes, prepared at site, to assess that whether the required volumetric properties are being attained.

HOSPET CHITRADURGA ROAD PROJECT Four Laning of Hospet Chitradurga Section of NH 13 (New NH 50)

Roles & Attainments:

• Performed structural evaluation for 40 km of in-service flexible road pavement by backcalculating elastic moduli, using the deflection data from FWD, and estimated the overlay requirement using the backcalculated moduli.

PROJECTS/ PAPERS DURING M.TECH

• Laboratory Investigation of High Modulus Bituminous Mixtures

Involved in developing a concept of high-binder high-modulus bituminous mixes as a solution that will not only increase the serviceability and life of the flexible pavement but will also aid in reducing the construction cost and resource preservation.

Under the guidance of Flexible Pavement Department, CSIR-CRRI, different laboratory tests were performed to measure and evaluate the physical and mechanical properties of the harder grade bituminous binders and the mineral. Bituminous mixtures were prepared for MoRT&H specified composition of Dense Graded Bituminous Macadam (DBM) pavement layers and performance related test were carried on them to relate laboratory mix design with the actual field performance.

• Formation of Database of Campus Road Network, Road Inventory, and Mapping of Road Network

Provided basic information needed for effective road and road system planning, management, operations and maintenance, and measured the width of carriageway, shoulder, non-motorized lanes etc.

PROJECTS/ PAPERS DURING B.TECH

• Non-Destructive Evaluation of Structural Parameters for Concrete Structures – A Comparative Investigation

It involved evaluating structural strength of various components of some of the Indian Railways concrete bridges using Non Destructive Testing methods and comparing the estimated results to highlight the effectiveness of a particular method for a particular purpose.

• Structural Health Evaluation of Concrete Road Bridges – an NDT Approach

The paper discusses the methods utilized for Non-Destructive Testing & Evaluation of Indian Railway Road Bridges, and the findings obtained were mutually compared to highlight the effectiveness of a particular method in a specific situation or for a specific purpose. The paper was presented at ‘Civil Structural Health Monitoring Workshop’ (CSHM-4) Berlin, Germany, 2012.

• Design Wind Loads on Reinforced Concrete Chimney – An Experimental Case Study

The paper looks into the interference and influence of strakes for wind load on Thermal Power Station (TPS) chimneys. The paper was presented at ‘12th East Asia-Pacific Conference on Structural Engineering & Construction’ (EASEC-12) Hong-Kong, China, 26-28 January 2011.

INDUSTRY INTERSHIP

• Central Road Research Institute, Delhi

Under the guidance of Transportation Planning Department, CSIR-CRRI, the P V Narsimha Rao expressway was analyzed for any inadequacies in safety features. Necessary remedial safety measures and exemplary solutions were also suggested on the basis of detailed study about Road Safety Audit.

• Northern Railway

Witnessed ongoing construction of two Road Over Bridges (ROBs), and, construction of a Road Under Bridge (RUB) with special technique of box pushing (Trenchless method).

• Geo-technical Engineering Directorate, RDSO

Under the guidance of Research Design & Standards Organization (RDSO), laboratory tests were carried out by on actual field samples collected from various Indian Railway sites.

CODES AND GUIDELINES

MoRT&H Specifications for Road and Bridge Works; IRC: 37; IRC: 58; IRC: 115; Asphalt Institute Manual Series No.-2 (Asphalt Mix Design Methods); IRC: SP: 84; IRC: SP: 89; IRC: 50; IS: 73; ASTM International Standards.

SOFTWARE KNOWLEDGE

IITPAVE, KGPBACK, ELayer, Auto-Cad, BACKFAA, Microsoft Office

EDUCATIONAL QUALIFICATION

Year Degree Specialization Institute/Board Percentage/ CGPA 2012 - 2014 M. Tech Transportation Engg. National Institute of Technology, Karnataka 8.83/10 2008 – 2012 B. Tech Civil Engg. Jaypee University of Information Technology 8.5/10

2008 XII Mathematics, Science CBSE 91.7% 2006 X Mathematics, Science CBSE 97.0%

PERSONAL VITAE

Date of Birth : 22nd July, 1990

Address :

Language(s) : Hindi and English

(Anant Gupta)