analysis and design of piezoelectric vibration energy ... · analysis and design of piezoelectric...

4
Analysis and Design of Piezoelectric Vibration Energy Overview: Vibration energy harvesting is an emerging topic and there are very few courses available in the world. Over the past decade there has been an explosive growth in research activities and most works are available as journal / conference papers only. This course will bring together the latest research by the International Faculty’s research group and works by other researchers in the field. The course will introduce the fundamental theoretical concepts of piezoelectric energy harvesting exploiting linear and nonlinear vibration. Practical design and optimisation methods will be discussed using experimental case studies. Participants will be trained on using Matlab to simulate multiphysical systems involving structural dynamics, smart materials and electrical equations together. Participants will also be given hands on experience to use smart materials for energy harvesting. Laboratory sessions will include, session on pasting of peizoelectric composite on beams, connecting electrical circuit and use of NI (national instrument) software for voltage measurement. Support excitations will be provided using a shaker and it will be shown to power up electronic sensors. Dates for the course 30 October 2017 – 3 November 2017 Host Institute Indian Institute of Technology Madras No. of Credits 01 Maximum no. of Participants 40 Registration Fees Students: INR 1000 /- Participants from abroad: USD 500 /- Academic Institutions/ Research Organization: INR 5,000 /- Industry participants: INR 10,000 /- The above fee is towards participation in the course, the course material, computer use for tutorials and assignments, and laboratory equipment usage charges. Mode of payment: Demand draft in favour of “Registrar, IIT Madras” payable at Chennai The demand draft is to be sent to the Course Coordinator at the address given above. Accommodation: The participants may be provided with hostel accommodation, depending on the availability, on payment basis. Request for hostel accommodation may be submitted through the link: http://hosteldine.iitm.ac.in/iitmhostel Faculties and industry persons would be provided IITM Guest House rooms (twin sharing / single rooms depending on availability). Participants may avail food/meals inside or outside the IITM campus, wherever they prefer, on their own expenses.

Upload: others

Post on 25-Jun-2020

8 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Analysis and Design of Piezoelectric Vibration Energy ... · Analysis and Design of Piezoelectric Vibration Energy Harvesters Overview: Vibration energy harvesting is an emerging

Analysis and Design of Piezoelectric Vibration Energy

Harvesters Overview: Vibrationenergyharvestingisanemergingtopicandthereareveryfewcoursesavailableintheworld.Overthe past decade there has been an explosive growth in research activities andmostworks are available asjournal / conference papers only. This course will bring together the latest research by the InternationalFaculty’s research group and works by other researchers in the field. The course will introduce thefundamentaltheoreticalconceptsofpiezoelectricenergyharvestingexploitinglinearandnonlinearvibration.Practicaldesignandoptimisationmethodswillbediscussedusingexperimentalcasestudies.

Participants will be trained on using Matlab to simulate multiphysical systems involving structuraldynamics,smartmaterialsandelectricalequationstogether.

Participants will also be given hands on experience to use smart materials for energy harvesting.Laboratorysessionswillinclude,sessiononpastingofpeizoelectriccompositeonbeams,connectingelectricalcircuit and use of NI (national instrument) software for voltage measurement. Support excitations will beprovidedusingashakeranditwillbeshowntopowerupelectronicsensors.

Dates for the course 30 October 2017 – 3 November 2017

Host Institute Indian Institute of Technology Madras

No. of Credits 01

Maximum no. of Participants 40

Registration Fees

Students:INR1000/-Participantsfromabroad:USD500/-AcademicInstitutions/ResearchOrganization:INR5,000/-Industryparticipants:INR10,000/-Theabovefeeistowardsparticipationinthecourse,thecoursematerial,computerusefortutorialsandassignments,andlaboratoryequipmentusagecharges.

Modeofpayment:Demanddraftinfavourof“Registrar,IITMadras”payableatChennaiThedemanddraftistobesenttotheCourseCoordinatorattheaddressgivenabove.

Accommodation:

The participants may be provided with hostel accommodation, depending on theavailability,onpaymentbasis.Request forhostel accommodationmaybe submittedthroughthelink:

http://hosteldine.iitm.ac.in/iitmhostel

Faculties and industry persons would be provided IITM Guest House rooms (twinsharing / single rooms depending on availability). Participantsmay avail food/mealsinsideoroutsidetheIITMcampus,wherevertheyprefer,ontheirownexpenses.

Page 2: Analysis and Design of Piezoelectric Vibration Energy ... · Analysis and Design of Piezoelectric Vibration Energy Harvesters Overview: Vibration energy harvesting is an emerging

Objectives

The proposed course aims to introduce the concepts of piezoelectric vibration energy harvesting usinganalytical,numericalandexperimentalapproaches.Mainobjectivesare:

1. To develop and explain linear and nonlinear coupled electro mechanical equations governingpiezoelectricvibrationenergyharvesting

2. Toexplainsolutionmethodsofthegoverningequationswithharmonicandrandomforcing3. To develop parameter optimisation methods for maximising energy harvesting under different

forcing4. Numericalsolutionsofcoupledmechanicalandelectricalequationinamulti-physicsenvironment.5. Handsontrainingforenergyharvestingdesignandmeasurement.

WhoshouldAttendtheCourse?

Anyoneinterestedinaddressingfutureenergychallengesbymechanicalapproachesshouldattendthecourse.Thecourseisinherentlymultidisciplinaryinnatureandspecificallystrongbackgroundinanyparticulartopicisnotnecessary.Therefore,attendeeswiththefollowingbackgroundsareencouraged:

§ EngineeringGraduateandPost-graduatestudentsatalllevels(B.Tech/B.E./M.Tech/M.E./MS/Ph.D)withdisciplinessuchas,mechanical,civil,electrical,aerospace,mechatronics,electronics.

§ ScienceGraduateandPost-graduatestudentsatalllevels(B.Sc,M.Sc./Ph.D)withdisciplinessuch

as,physics,materialsscienceandmathematics.

§ Facultyand/orprojectstafffromacademicandtechnicalinstitutions,andresearchersinR&Dorganizations,interestedinand/orworkinginthefieldsofenergy,structuralvibrations,dynamics,autonomoussystems,control,smartmaterials.

RegistrationProcedure

Pleasefollowthefollowingstepsfortheregistration:1.GotoGIANwebsite(http://www.gian.iitkgp.ac.in/GREGN/index)Firsttimeusersneedtoregisterandpayaone-timefeeofINR500/-.2.Enrollforthecourse:AnalysisandDesignofPiezoelectricVibrationEnergyHarvesters.Onceyouenrollforthecourse,anEnrollment/Applicationnumberwillbegenerated,andthecoursecoordinatorswillbenotified.3.TheselectedcandidatesmustpaytheapplicablefeesusingDemandDraft(DD)drawninfavourof“Registrar,INDIANINSTITUTEOFTECHNOLOGYMADRAS”.PleasewriteyourNameandEnrollment/ApplicationnumberatthebackoftheDD,andpost/courierit,toreachby10thOctober2017.

Page 3: Analysis and Design of Piezoelectric Vibration Energy ... · Analysis and Design of Piezoelectric Vibration Energy Harvesters Overview: Vibration energy harvesting is an emerging

AddressoftheCourseCoordinator:Dr.ShaikhFaruqueALIDepartmentofAppliedMechanicsIndianInstituteofTechnology-Madras(IIT-M)Chennai600036,IndiaEmail:[email protected]:+91-9940473031;+91-44-2257-4054Fax:+91-44-2257-40524.FillthecourseregistrationforminGIANportal.EmailthecourseregistrationformtotheCourseCoordinatorsandVolunteersby15thOctober2017.

Volunteers

Queriesaboutthecoursemaybesendto:[email protected],+91-8072340031

[email protected],+91-9944347942

Page 4: Analysis and Design of Piezoelectric Vibration Energy ... · Analysis and Design of Piezoelectric Vibration Energy Harvesters Overview: Vibration energy harvesting is an emerging

TheTeachingFaculty

Prof Adhikari (MS, IISc Bangalore; PhD, Cambridge) is the ChairProfessorofAerospaceEngineeringattheCollegeofEngineeringofSwanseaUniversity.HeReceivedtheWolfsonResearchMeritAwardfrom the Royal Society (UK academy of sciences). He was anEngineeringandPhysicalScienceResearchCouncil(EPSRC)AdvancedResearch Fellow and winner of the Philip Leverhulme Prize inEngineering(giventoanoutstandingscholarundertheageof35).Heobtained his Ph.D. in Engineering at the Trinity College of theUniversityofCambridge.Hewasa lecturerat theBristolUniversityandaJuniorResearchFellowinFitzwilliamCollege,Cambridge.From2015hehasbeenaDistinguishedVisitingProfessorattheUniversityof Johannesburg (South Africa). He was a visiting Professor at theUniversityofParisEast (France),CarletonUniversity (Canada)andavisitingscientistattheLosAlamosNationalLaboratory(USA).ProfessorAdhikari'sresearchstandsonthreefundamentalfootings-structural dynamics, probabilistic methods and computationalmechanics. His research works use these basic principles tounderstandcuttingedgemultiscaleandmultidisciplinaryproblemsinapplied science and engineering. He has published 4 books, 265peer-reviewedjournalpapers,and170conferencepapers.Heisoneofthemostcitedresearchersinhisfield(over8500citationswithh-index=50).Hehas supervisedover15Ph.D. students andpostdocs.ProfessorAdhikari isaFellowofRoyalAeronauticalSociety(FRAeS)and the member of the AIAA Non-Deterministic ApproachesTechnicalCommittee(NDA-TC).Heisamemberoftheeditorialboardofseveral journalssuchas:ComputersandStructures, ProbabilisticEngineeringMechanicsandJournalofSoundandVibration.

Dr. Ali is currently with the faculty of Department of AppliedMechanics,IndianInstituteofTechnologyMadras.Heisanassociatefellow of INAE and a Newton international alumnus from RoyalAcademy of Engineering, UK. He is recipient of DAAD researchexchange fellowship from DAAD in 2015; Young Engineer Awardfrom INAE in 2014; Newton Fellowship from Royal Society, UK in2009. Dr. Ali has received his doctorate from Indian Institute ofScience-Bangalore and BE from Jadavpur University, Kolkata. Hisresearch interests are in structural dynamics, vehicular vibrations,autonomousvehicles,controlsystemsandenergyharvesting.Hehaspublished 23-research paper and has more than 40 internationalconferences.Hehasalsopublished1bookand4bookchapters

23/04/17, 4*35 PMPrintable Application Form | FacApp

Page 1 of 2https://facapp.iitm.ac.in/facupload/printapp

Home

FacAppFaculty Recruitment Portal of IIT Madras (Summer 2017)

Printable Application FormIndian Institute of Technology Madras

Application / Data Sheet

Advertisement No. IITM/R/1/2017 Dated March 20, 2017

Posts Appliedfor

ASP

Departments AM

Name Shaikh Faruque Ali

AddressRoom No. 231, Mechanical Sciences Block, Department of Applied Mechanics, Indian Institute of Technology -Madras, Chennai - 600 036, INDIA

Email,[email protected]@gmail.com

Nationality Indian

Gender Male

Date of birth(Age)

1980-01-29 (37 years 2 months)

Degree Date of Completion University Specialization Marks

PhD 2008-12-12 Indian Institute of Science - Bangalore Structural dynamics and controls

BE 2003-06-18 Jadavpur University Civil Engineering 77.8 / 100 / First Class

Post-doctoral Specialization Structural control, energy harvesting

Present Position Assistant Professor, Department of Applied Mechanics, Indian Institute of Technology - Madras Pay details: PB 4

Total Experience (Years) 8.83

Teaching Experience (Years) UG 5.33 PG 5.33

Research Experience (Years) Before PhD 0.00 After PhD 8.83

Industrial Experience (Years) Before PhD 0.00 After PhD 0.00

Research Guidance PhD MS M.Tech

Completed 1 2 9

Ongoing 9 1 3

Journal Publications 22

Conference Publications 40

Total Number of Publications 62

Books Published 1

Patents Filed 0