an iso 9001:2015 registered company - vintageair.com · an iso 9001:2015 registered company 18865...

8
an ISO 9001:2015 Registered Company 18865 Goll St. San Antonio, TX 78266 Phone: 800-862-6658 Sales: [email protected] Tech Support: [email protected] www.vintageair.com 909120 REV B 03/26/18, PG 1 OF 7

Upload: dinhdang

Post on 04-Jun-2018

249 views

Category:

Documents


3 download

TRANSCRIPT

an ISO 9001:2015 Registered Company

18865 Goll St. San Antonio, TX 78266 Phone: 800-862-6658

Sales: [email protected] Support: [email protected]

www.vintageair.com

909120 REV B 03/26/18, PG 1 OF 7

2

www.vintageair.com

909120 REV B 03/26/18, PG 2 OF 7

Cover..................................................................................................................................Table of Contents.................................................................................................................Installation Instructions.........................................................................................................Operation of Controls............................................................................................................Wiring Diagram Heat/Cool.....................................................................................................Wiring Diagram Heat/Cool/Defrost..........................................................................................Air Conditioning Adjustments.................................................................................................

1 2 3 4 5 6 7

Table of Contents

3

www.vintageair.com

909120 REV B 03/26/18, PG 3 OF 7

NOTE:PANEL IN PLACE.

THIS WILL SECURE

4

www.vintageair.com

909120 REV B 03/26/18, PG 4 OF 7

5

www.vintageair.com

909120 REV B 03/26/18, PG 5 OF 7

6

www.vintageair.com

909120 REV B 03/26/18, PG 6 OF 7

7

www.vintageair.com

909120 REV B 03/26/18, PG 7 OF 7

INSERT THERMOSTATCAPILLARY TUBETHRU THIS HOLE.

ENTIRE THICKNESS OFEVAPORATOR COIL.

THIS STICKER LOCATED ON TOP SIDE OF EVAPORATOR CASE

NOTE: YOUR SYSTEM MAY HAVE A ROTARY OR SLIDE TYPE THERMOSTAT. IF YOU ARE UPGRADING TO A NEW CONTROL PANEL, USE THE THERMOSTAT INCLUDED WITH THE NEW PANEL. REMOVE YOUR ORIGINAL THERMOSTAT AND DISCARD.

INSERT THERMOSTATCAPILLARY TUBE THRU THIS HOLE THE

ENTIRE THICKNESS OFEVAPORATOR COIL.

INSERT THERMOSTAT

CAPILLARY TUBE HERE INTO THE

COIL THE ENTIRE THICKNESS.THEN CAREFULLY BRING

IT BACK OUTAPPROX. 1/2 INCH

COMPACT SUB-CASE TOP VIEW SHOWN

CAPILLARYTUBETOEVAPORATORCOIL

STRAIGHTEN CAPILLARY TUBE THE ENTIRE

THICKNESS OF EVAPORATOR SUB-CASE