wireless communications

121

Wireless Communications

121

Course Material

• Wireless Communications: Principles and Practice by T. Rappaport

• Mobile Communications: Jochen Schiller

• References

– Wireless Communications and Networks by W. Stallings

– Wireless Communication by Roy Blake.

– Internet.

121

CELLULAR CONCEPTS

121

Single Cell ‘Network’

121

History of Cellular Networks

• Why cellular networks?– To address requirement for greater capacity

– For efficient use of frequency

– To address the poor quality of non cellular mobile networks

and increases coverage

• replaces a large transmitter with smaller ones in cells

• smaller transmitting power

• each cell serves a small geographical service area

• each cell is assigned a portion of the total frequency

121

Replacement of huge single cell by a number of small cells

121

Why Hexagonal Cell Structure

No proper coverage of the area with theoretical circles.

Polygon near to the circleHexagon is selected for further technical

simplicity.

121

Description of a Cell

• Approximated to be a hexagonal coverage

• best approximation of a circular area

• Served by a base station• low powered transceiver

• antenna system

• may be divided into 6 equilateral triangles

• length of base of each triangle = 0.5R (radius)

• different groups of channels assigned to base stations

R

RR

87.02

3

121

Mathematical Description of a Cell

• Area of a cell is:

• Perimeter of a cell = 6R

22

598.22

33

23

26 R

RRx

RxAreacell

121

Types of Mobile Communication Cells• The size of a cell is dictated by capacity demand

– Macro-cell

• large, covering a wide area

• range of several hundred kilometers (km) to ten km

• mostly deployed in rural and sparsely populated areas

– Micro-cell

• medium cell, coverage area smaller than in macro cells

• range of several hundred meters to a couple of meters

• deployed mostly in crowded areas, stadiums, shopping malls

121

Types of Mobile Communication Cells Contd.• The size of a cell is dictated by capacity demand

– Pico-cell

• small, covering a very small area

• range of several tens of meters

• low power antennas

• can be mounted on walls or ceilings

• used in densely populated areas, offices, lifts, tunnels etc

– Mega-cell

-- These cells are formed by LEO and MEO

121

Capacity Computations

• Assume there are N cells, each allocated k different frequency channels. These N cells are said to form a cluster. Total number of channels per cluster is given by

• S = k N • Total capacity associated with M clusters: C = M k N = M S • A cluster may be replicated more times in a given area if the cells

are made smaller (note that power needs to be reduced accordingly).

• Capacity of cellular system is directly proportional to “M”, number of times a cluster is replicated.

121

Capacity versus interference for same size cell and power transmission

• Decrease N for More Capacity: If Cluster Size, N is decreased while cell size remains fixed,

more clusters are required to cover the area (M increases). Therefore, Capacity increases.

• Increase N for Less Interference: On the other hand, if N is increased (large cluster size)

means that co-channels are now farther than before, and hence we have will have less interference.

Value of N is a function of how much interference a mobile or a base station can tolerate.

We should select a smallest possible value of N but keeping S/I in the required limits.

121

Means of Increasing System Capacity

• There are several approaches for increasing cellular system

capacity including:

– Cell clustering

– Sectoring of cells

– Cell splitting

– Frequency reuse

– Reduction of adjacent cell interference and co-channel

interference

121

Cell Clusters• Service areas are normally divided into clusters of cells to

facilitate system design and increased capacity

• Definition

– a group of cells in which each cell is assigned a different

frequency

• cell clusters may contain any number of cells, but

clusters of 3, 4, 5, 7 and 9 cells are very popular in

practice

121

Cell Clusters

• A cluster of 7 cells

• the pattern of cluster is repeated throughout the network

• channels are reused within clusters• cell clusters are used in frequency planning for the

network• Coverage area of cluster called a ‘footprint’

1

2

5

6

7

4

3

121

Cell Clusters (1)

• A network of cell clusters in a densely populated Town

1

2

5

6

7

4

3

1

2

5

6

7

4

3

1

2

5

6

7

4

3

1

2

5

6

7

4

3

1

2

5

6

7

4

31

2

5

6

7

4

3

1

2

5

6

7

4

3

121

Representation Of Cells Through BS

121

Frequency Plan

• Intelligent allocation of frequencies used

• Each base station is allocated a group of channels to

be used within its geographical area of coverage

called a ‘cell’

– Adjacent cell base stations are assigned completely

different channel groups to their neighbors.

– base stations antennas designed to provide just the cell

coverage, so frequency reuse is possible

121

Frequency Reuse Concept

• Assign to each cluster a group of radio channels to be used

within its geographical footprint

– ensure this group of frequencies is completely different from

that assigned to neighbors of the cells

• Therefore this group of frequencies can be reused in a cell

cluster ‘far away’ from this one

– Cells with the same number have the same sets of

frequencies

121

Frequency Reuse Factor

• Definition

– When each cell in a cluster of N cells uses one of

N frequencies, the frequency reuse factor is 1/N

– frequency reuse limits adjacent cell interference

because cells using same frequencies are

separated far from each other

121

Factors Affecting Frequency Reuse

• Factors affecting frequency reuse

include:

Types of antenna used

--omni-directional or sectored

placement of base stations

-- Center excited or edge excited.

121

Excitation of Cells– Once a frequency reuse plan is agreed upon overlay the frequency

reuse plan on the coverage map and assign frequencies

– The location of the base station within the cell is referred to as cell

excitation

– In hexagonal cells, base stations transmitters are either:

• centre-excited, base station is at the centre of the cell or

• edge-excited, base station at 3 of the 6 cell vertices

121

Finding the Nearest Co-Channel

After selecting smallest possible value of N we should see that N should follow

the following eq. N= i2+j2+ij

(1) Move i cells along any chain of hexagons

(2) Turn 600 counter-clockwise and move j cells, to reach the next cell using

same frequency sets

– this distance D is required for a given frequency reuse to provide enough

reduced same channel interference

– ie, after every distance D we could reuse a set of frequencies in a new

cell

Freq Reuse ( N=7 , i=2 j=1)

A

B

E

DF

CG

A

B

E

DF

CGA

B

E

DF

CGi

j

121

Freq Reuse ( N=19 , i=3 j=2)

121

How frequency Reuse Increases Capacity

Example: A GSM communication system uses a

frequency reuse factor of 1/7 and 416 channels

available. If 21 channels are allocated as control

channels, compute its system capacity. Assume a

channel supports 20 users

Channels available for allocation = 416 - 21 = 395

Number of cells = 395 / 7 = 57

Number of simultaneous users per cell = 20 x 57 = 1140

Number of simultaneous users in system = 7 x 1140 = 7980

121

To satisfy the user, a channel needs to be available on request.

Reasonable probability of call blockage (GOS) is 2%.

GOS fluctuate with location and time. The goal is to keep a uniform GOS across the system.

Reduction of variations in GOS allow more users – an increase in capacity.

Three types of algorithms for channel allocation: Fixed channel allocation (FCA) Channel Borrowing Dynamic channel allocation (DCA)

Channel Allocation TechniquesTargets to achieve through the different

channel allocation techniques.

121

Available spectrum is W Hz and each channel is B Hz. Total number of channels:

Nc = W/B For a cluster size N, the number of channels per

cell:Cc = Nc/N

To minimize interference, assign adjacent channels to different cells.

Fixed Channel Allocation Techniques

121

FCA is the optimum allocation strategy for uniform traffic across the cells.

A non uniform FCA strategy, when it is possible to evaluate GOS in real time and adjust the FCA accordingly. This requires a more complex algorithm.

Features of Fixed Channel Allocation Techniques

121

Channel Borrowing Borrow frequencies from low traffic cells to high

traffic cells. Temporary channel borrowing: channel is

returned after call is completed. If channels from cell E are borrowed by cell A,

then neighboring cells E cannot use those channels.

121

Dynamic Channel Allocation All channels are placed in a pool, and are

assigned to new calls according to the reuse pattern. Signal is returned to the pool, when call is completed.

Issues related to channel allocation are still under research.

121

Comparison of Channel Allocation Techniques

Fixed Channel Allocation Advantages:

--- Less load on MSC--- Simple

Disadvantages: Blocking may happen

Dynamic Channel Allocation Advantages:

Voice channels are not allocated permanently. That is, resource is shared on need-basis

Disadvantages: --- Requires MSC for processing---burden on MSC

--- May be very complicated

121