we make the world of agricultural plastics grow
Post on 10-Jan-2022
1 Views
Preview:
TRANSCRIPT
32
transformingcrops
Since 1986 Solplast has been transforming agriculture through our research, technology and creativity in specialised plastics.
We are a strong national leader, with the highest production figures in Spain, and a major global competitor, exporting to 40 countries worldwide.
We have an annual productioncapacity of 60,000 tonnes, usingmultilayer coextrusion technology.In manufacturing our filmswe combine low-density polyethylene(LDPE), linear low-density polyethylene(LLDPE), metallocenes and ethylene-vinyl acetate (EVA)/butyl acrylate (EBA) copolymer, along with other types of specific, more technical polymers, all under the strictest quality management procedures as per standard ISO 9001.
We can extrude films from 10 micras (40 gauges), and up to 1 mm (4,000 gauges) at widths of up to 20 m. We adapt to our clients requirements in terms of dimensions and presentations.
Our knowledge of different markets, service capacity and logistic development means we can offer the most advanced solutions in agricultural plastics, and continue contributing to more sustainable and profitable crops.
the strengthof a major group
Solplast is part of the Armando Álvarez Group, one of the largest plastic transformation companies in Europe, with an annual volume of 300,000 tonnes.
The Group consists of 15 companies, all complementing one another, specialising in different segments and applications in the plastics market, enabling us to have a global vision of the sector, integrate a variety of solutions and act as a launch pad for new technological developments.
The Armando Álvarez group is present with its own offices in Germany, Benelux, France, United Kingdom, Portugal, United States, Mexico, Morocco and Turkey.
Together we make our clients stronger.
FACTORIES
BRANCHES
4 5
76
cultivatinginnovation
Our route map for innovation involves field work to establish the real needs of farmers, the crop development and agricultural practices.
We apply active R&D&I policies, testing new applications with polymers and additives in conjunction with our suppliers, universities and research institutes. We also work shoulder-to-shoulder with our clients to adapt our developments to their specific applications. We constantly invest in new technologies. We create new products to solve highly specific problems based on each crop and field of application.
We work actively to protect the environment by applying techniques that minimise production emissions and waste while we conduct research into reducing the environmental impact of all our products.
We are important allies for our clients, helping them evolve and continually increase their efficiency and competitiveness.
98
Solplasthas the solution
We cover all market needs from beginning to end with the broadest, most specialised universe of agricultural plastics.
Each crop has a ‘Solplast’ solution.
PRODUCT RANGEMULCH
PRODUCT RANGEGREENHOUSE COVERING
PRODUCT RANGEDISINFECTION
PRODUCT RANGEDOUBLE SCREEN
PRODUCT RANGESILAGE
PRODUCT RANGERESERVOIRS
PRODUCT RANGESMALL TUNNEL
PRODUCT RANGESPECIAL PRODUCTS
1110
Films manufactured by multilayer coextrusion, using combinations of homopolymers (LDPE and LLDPE), copolymers (EVA and EBA) and metallocene resins. These materials are combined in different layers to make the most of their agronomic benefits. The INDASOL films are thermal (they reduce cooling inside the greenhouse at night) and are available in different thicknesses and presentations, depending on the end application.
Excellent mechanical properties: combining the flexibility of the EBA/EVA copolymers in the central layers with the rigidity and mechanical strength of the LLDPE materials and the metallocenes in the outer layers.Highly resistant to degradation due to both UV radiation and treatments applied inside the greenhouses.Good transmission of visible light, generating high luminosity within the greenhouse.The DIFFUSE version prevents shadows forming in the greenhouse, thus producing greater uniformity of radiation and preventing irregular crop growth.In the CRISTAL version, direct transmission is very high, with very little diffusion, making it suitable for geographic areas with low radiation or short sunlight hours.Highly efficient heat-insulation, making the INDASOL films an ideal solution for geographical areas with sharp night-time temperature drops. How long each product lasts depends on the climate and radiation in the area of agriculture, the product characteristics and the agricultural uses it is put to.
PR
OD
UCT
RA
NG
E G
REE
NH
OU
SE C
OO
VER
ING
• IN
DA
SOL
INDASOL White
INDASOL Yellow
INDASOL White Plus
INDASOL Yellow Plus
INDASOL Q4tro
INDASOL Cristal
INDASOL TRITERMIC
INDASOL SOLAIR
PRODUCT RANGEGREENHOUSE COVERING GENERAL FEATURES
INDASOL
1312
Films manufactured by multilayer coextrusion, using homopolymers (LDPE and LLDPE), copolymers (EVA and EBA) and metallocene resins, combined to maximise their properties. These materials are non-thermal and are available in different thicknesses and presentations, depending on the end application.
Good mechanical properties, providing excellent performance against damage due to weather conditions and handling in application.Highly resistant to degradation caused by sunlight and high temperatures.The DURAPLAST versions (White and Yellow) are specially designed to resist chemical degradation caused by treatments used inside greenhouses, withstanding an S content of up to 3,000 ppm and a Cl content of up to 200 ppm.The DURASOL Antithermal and Shadow products are specifically designed for high-radiation areas, when the crop requires a high temperature peaks inside the greenhouse to be lowered. How long each product lasts depends on the climate and radiation in the area of agriculture, the product characteristics and the agricultural uses it is put to.
PR
OD
UCT
RA
NG
E G
REE
NH
OU
SE C
OVE
RIN
G •
DU
RA
SOL
DURASOL White
DURASOL Yellow
DURASOL Shadow
DURASOL Antithermal
DURAPLAST White
DURAPLAST Yellow
PRODUCT RANGEGREENHOUSE COVERING GENERAL FEATURES
DURASOL
1514
Films manufactured by multilayer coextrusion, using combinations of homopolymers (LDPE and LLDPE), metallocene resins and EVA/EBA copolymers. These materials are thermal (they reduce cooling inside the greenhouse at night) and are available in different thicknesses and presentations, depending on the end application.
Good mechanical properties, providing excellent performance against damage due to weather conditions and handling in application.Highly resistant to degradation caused by sunlight and high temperatures.Good transmission of visible light, producing high luminosity within the greenhouse.High light diffusion. This prevents shadows forming in the greenhouse, thus producing greater uniformity of radiation and preventing irregular crop growth.Excellent thermal effect, which reduces temperature drops inside the greenhouse when there is no external energy supply, thus reducing the risk of frost.Due to its heat-insulating efficiency, DURATERMIC film is specially indicated for geographical areas that produce sharp drops in temperature at night, although it is also suitable for milder climates.How long each product lasts depends on the climate and radiation in the area of agriculture, the product characteristics and the agricultural uses it is put to.There are different varieties within the DURATERMIC range specially designed for installing in macro-tunnels for growing strawberries and raspberries.
RA
NG
E O
F P
RO
DU
CTS
FO
R G
REE
NH
OU
SE C
OVE
RIN
G •
DU
RA
TER
MIC
DURATERMIC White
DURATERMIC Yellow
DURATERMIC Strawberry
DURATERMIC Raspberry
DURATERMIC Antivirus
DURATERMIC Antithermal
DURATERMIC Grape
PRODUCT RANGEGREENHOUSE COVERING GENERAL FEATURES
DURATERMIC
1716
PRODUCT RANGEMULCH
The SOLPLAST mulch products are manufactured in multilayer structures, with a combination of LDPE, LLDPE and metallocene resins. They are manufactured in different thicknesses and presentations, depending on the end application, but always maintaining high mechanical and agronomic qualities.
GENERAL FEATURES
Mulch films are used to protect crops from atmospheric agents and prevents effects such as:
Drying of the soil.Deterioration of product quality.Cooling of the land.Fertilizer washing.
They improve the soil structure: constant moisture leads to better, more lateral and shallower root development.They improve soil moisture: preventing water evaporation.They regulate and balance the soil temperature.Generally, soil temperature rises during the day and remains steady at night.They improve land fertility by increasing temperature and moisture, favouring soil nitrification. They can affect the growth of weeds. They improve product quality by preventing contact with the soil, especially with creeping crops.
Advantages of using mulch film
PR
OD
UCT
RA
NG
E M
ULC
H •
AC
OSO
L
ACOSOL NtNATURAL MULCH
ACOSOL NgBLACK MULCH
ACOSOL NGWHITE/BLACK MULCH
ACOSOL Pt-NgSILVER/BLACK MULCH
ACOSOL FsPHOTOSELECTIVE MULCH
ACOSOL OD-NtNATURAL OXO-BIODEGRADABLE MULCH
ACOSOL OD-NgBLACK OXO-BIODEGRADABLE MULCH
ACOSOL BdBLACK BIODEGRADABLE MULCH
ACOSOL
1918
SOLPLAST soil disinfection films are manufactured in multilayer structures, with a combination of LDPE, LLDPE and metallocene and/or barrier resins, as well as the necessary additives. They are manufactured in thicknesses ranging from 20 to 50 micras, maintaining high mechanical and agronomic qualities.
The films for disinfecting soils are designed to improve the effectiveness of disinfection.Different types of film are used, depending on the type of disinfection to be carried out. Each one is designed with specific characteristics to adapt it to different types of disinfection.The multilayer technology used by SOLPLAST to manufacture its products permits the combination of resins and additives, thus obtaining a wide range of properties to match each type of application.In some cases, effects such as light transmission or heat radiation are strengthened to increase soil temperatures and provide good disinfection through solarisation (DESINFESOL Solarisation). Resins with thermal properties are used for this purpose, as they maintain heat in the soil for longer, thus lengthening the optimum conditions for good solarisation. Anti-drip additive are also incorporated to prevent drips forming on the film surface, maximising thermal radiation transmission to the soil.In other cases, special high gas-barrier resins are used to reduce gas loss through the plastic (DESINFESOL Special DS) or practically impede such loss (DESINFESOL Barrier).In both cases, the aim is to increase the efficacy of soil disinfection, reducing times and improving the mortality of possible pathogens, even at greater soil depths.
PR
OD
UCT
RA
NG
E D
ISIN
FEC
TIO
N •
DES
INFE
SOL
DESINFESOL Solarisation
DESINFESOL Special DS
DESINFESOL Barrier
PRODUCT RANGEDISINFECTION GENERAL FEATURES
DESINFESOL
2120
Temperatures under a given threshold notable harm crops grown in greenhouses. To avoid temperature drops, especially at night and the early morning, thermal plastics are useful for greenhouse roofing. These films maintain the greenhouse temperature, reducing cooling in the area of cultivation.The double screen films are used to improve thermal protection of crops, thus strengthening the effect of the roofing while reducing light transmission into the greenhouse as less as possible.In addition, these double screen films create an air chamber between the roof plastic and the double screen, which delays cooling, reducing thermal oscillations and reducing stress caused to plants.
The SOLPLAST double screen films are produced using resins which considerably improve light transmission into the greenhouse, minimising losses in the area of cultivation. In addition, they have a thermal effect that strengthens that of the greenhouse roof.The air chamber created between the two films (roof and double screen) minimises heat oscillations between night and day.The DOUBLE SCREEN film is also characterised by its anti-drip effect. This prevents drops forming inside the sheet due to condensation in the greenhouse. A continuous sheet of water forms instead of drops and with an adequate incline of the double screen film, this flows towards the sides of the greenhouse, preventing dripping onto plants and reducing the risk of diseases.Absence of drops also improves light transmission, avoiding total reflection effect. This increases heating in the greenhouse, especially in the early morning.The DOUBLE SCREEN films can be manufactured with holes 10 or 5 mm in diameter to improve ventilation inside the greenhouse and also prevent the formation of pockets of water on the top of the double screen.
PR
OD
UCT
RA
NG
E D
OU
BLE
SC
REE
N •
DO
UB
LE S
CR
EEN
DC DURASOL Solterm
DC DURASOL Cristal
PRODUCT RANGEDOUBLE SCREEN GENERAL FEATURES
DOUBLE SCREEN
The SOLPLAST double screen films are manufactured at thicknesses starting from 37.5 micras (150 gauges). They are produced using EVA/EBA copolymers and/or metallocenes, in multilayer structures, which considerably improve light transmission into the greenhouse, minimising losses in the area of cultivation.
2322
The SOLPLAST films for these applications are manufactured in multilayer structures, combining LDPE, LLDPE and metallocene resins and/or EVA/EBA copolymers, as well as the necessary additives. They are manufactured in different thicknesses and presentations, depending on the end application for the product.
PR
OD
UCT
RA
NG
E SM
ALL
TU
NN
ELS
• TU
NES
OL
TUNESOL Natural
TUNESOL Natural UV
TUNESOL Thermal Diffuse
TUNESOL Thermal Cristal
PRODUCT RANGESMALL TUNNEL GENERAL FEATURES
TUNESOL
Small tunnels are light, simple structures for protecting crops from the weather and external agents.Their small size produces very low thermal inertia, heating rapidly during the day and releasing heat rapidly at night.For crops or geographical areas that do not require thermal properties, SOLPLAST offers the products TUNESOL Natural and TUNESOL Natural UV.These films have excellent mechanical properties, providing the crops with physical protection from external harm. The ultraviolet stabilisation provided by TUNESOL UV gives it a longer life if required by the application.When a more technical product is required for this application, SOLPLAST offers its TUNESOL Thermal Diffuse and TUNESOL Thermal Cristal films. The composition of these materials includes resins with thermal properties, as well as a package of IR additives that improve heat retention, avoiding sharp drops in temperature, especially during periods of frosts.TUNESOL Thermal Diffuse provides good light diffusion, preventing formation of shadows in the small tunnel, thus improving the regular plant development. It is suitable for areas of high radiation.For areas of lower radiation, or crops that require high light transmission, we recommend TUNESOL Thermal Cristal, whose high transparency maximises light to the plants.Anti-drip additives may be added to these films, to prevent drops forming inside the sheet. Instead of such drops, a continuous sheet of water forms, which, preventing dripping onto plants and reducing the risk of diseases.In addition, the absence of drops improves light transmission, preventing the total reflection effect. This increases heating in the greenhouse, especially in the early morning.These films may be manufactured with holes 12, 10 or 5 mm in diameter with different layouts to improve ventilation in the tunnel, thus favouring crop development.
2524
SOLPLAST silage films are manufactured in multilayer structures, with a combination of LDPE, LLDPE and metallocene resins. They are manufactured in different thicknesses and formulations and are specifically designed for covering forage, so it maintains its high nutritional qualities for livestock.This range also includes silage films to cover corn or peat.
One of the main problems in forage production is its seasonal nature, leading to the use of preservation practices so the forage may be used later. These practices ensure the quality of the forage is maintained.Silage is a conservation technique for moist grass and grain using plastic covers. It involves spontaneous lactic fermentation in anaerobic conditions (lack of O2).This fermentation produces acidification (pH reduction to around 4.2), inhibiting the activity of micro-organisms, which can degrade the product, and fungal activity. This process enables feed to be stored after harvesting, maintaining its nutritional quality and strength, thus increasing the animal count per hectare and replacing or complementing feed concentrates.
PR
OD
UCT
RA
NG
E SI
LAG
E •
SILA
SOL
SILASOL Ne
SILASOL Ne+
SILASOL BN
SILASOL BN+
SILASOL Ve-Ne
SILASOL Ve-Ne+
SILASOL B
SILASOL Gr-Ne
SILASOL Gr-Ne+
PRODUCT RANGESILAGE GENERAL FEATURES
SILASOL
2726
Agriculture in many parts of the world is affected by lack of water, as rain often falls at the wrong time and not in the required amounts. Furthermore, not all farms have the necessary resources or the right size for building large reservoirs and canals.The best alternative for this water storage need is to build small waterproof reservoirs using plastic sheets.The reasons for using these sheets include their price (very economical) and ease of installation.
These products for waterproofing are manufactured in thicknesses from 250 µ to 1 mm, for the GEOEMBALSE Standard and 500 µ for the GEOEMBALSE Welded.The GEOEMBALSE Standard is manufactured with a combination for LDPE and LLDPE resins, which give the end product high mechanical strength, especially against penetration and impact, making the product particularly suitable for this application. The GEOEMBALSE Weldable is manufactured with a three-layer structure, using LDPE, LLDPE and other specific material to optimise product performance in the application.The external layers of this film consist of easily weldable materials to guarantee a good joint between the different sheets used in building the reservoir. The central layer is manufactured from materials with high mechanical strength, which also give the product the required rigidity for easy handling.In both cases the film is stabilised with carbon black, to guarantee total film opacity, as well as good protection from UV radiation.
PR
OD
UCT
RA
NG
E R
ESER
VOIR
S •
GEO
EMB
ALS
E
GEOEMBALSE Standard
GEOEMBALSE Weldable
PRODUCT RANGERESERVOIRS GENERAL FEATURES
GEOEMBALSE
2928
The SOLPLAST product range also includes solutions for various applications, using specific materials:
B/W FILM FOR HYDROPONIC CULTIVATION
Two-tone (black/white) sheet manufactured using LDPE, LLDPE and metallocenes, in thicknesses starting at 100 µ (400 gauges). It is used as a medium for hydroponic cultivation substrates (without soil).It is characterised by excellent mechanical properties.Reflection of light off the white layer prevents the risk of burns in the aerial part of the plant, while providing extra light to the lower parts, thus improving crop yield.
The black layer guarantees complete opacity, preventing weed growth.
STRETCHABLE CUCUMBER FILM
This product is designed specifically for packaging cucumber.It is manufactured in thicknesses ranging from 15 to 20 micras, using resins authorised for food contact.Its mechanical and optical properties (high gloss and transparency) and its capacity to stretch make it particularly suitable suitable for this application.
PROTECTION FILMS
This group includes films manufactured for construction, protection for boats or large machinery, product storage and packaging, pallet fumigation, protection from external agents and more.In all cases, these films are characterised by their easy installation and handling and their flexibility for use in different applications.SOLPLAST adapts these types of products to each specific application, modifying their properties to obtain the desired results in each case.
BULK CONTAINER LINER
Liners are used throughout the world to sent raw materials that require moisture control, odour protection and good protection against contamination. They are also used as a physical protection barrier to avoid contamination of the container carrying the product, thus permitting very different types of product to be loaded, using the same container for successive journeys.Container and flexitank liners are frequently used as a economical solution for the bulk transport of chemical products, grains, cereals, liquids, granulated products and more.SOLPLAST has developed various specific types of plastic for use as container liners for the transport of both solid and liquid products.These materials are manufactured in different widths and thicknesses, depending on the end application.The materials are designed in multilayer structures, using combinations of metallocene resins and EVA/EBA copolymers, which strengthen the mechanical properties of the product. This prevents problems of tearing due to the pressure exerted by the load inside the liner, as well as possible damage caused by movement of the load during the journey.There are certain applications where the characteristics of the transported product require a high O2 barrier to prevent oxidation. In these cases, barrier sheets are required to impede the gas crossing the plastic.SOLPLAST offers solutions for these types of products, using films in 5-layer structures, with a layer of barrier resin, adapted to the application.As well as the gas-barrier properties, these materials have a high mechanical strength, guaranteeing preservation of the transported product against possible damage caused during the journey. P
RO
DU
CT R
AN
GE
SPEC
IAL
PR
OD
UC
TS
B/W FILM FOR HYDROPONIC CULTIVATION
STRETCHABLE CUCUMBER FILM
PROTECTION FILM
BULK CONTAINER LINER
PRODUCT RANGESPECIAL PRODUCTS
GENERAL FEATURES
SPECIAL PRODUCTS
3130
Product Presentation Sales offices
FOLDS
Holes for sleeves Holes for protection covers
SPECIAL FOLDS
SHEET
FOLD P-A
FOLD P-B
FOLD P-1
FOLD P-2
Macro-hole
Floating cover with multiple holes
ParallelSalade
Staggered holes Aeré
TUBE OPEN AT ONE SIDE
FOLD x4
FOLD x8
ALMERIADiseminado Cartabona, 304710 SANTA MARÍA DEL ÁGUILA (Almería)Phone no. +34 950580714 - Fax no. +34 950580852 MOTRILCamino las Ventillas, s/n18600 MOTRIL (Granada)Phone no. +34 958821262 - Fax no. +34 958821262
FRANCEALVAPLAST FRANCE, S.A.R.L.IMMEUBLE L’ALLIANCE - ZONE DE JORLIS64600 ANGLET (France)Phone no. +33 0559310110 - Fax no. +33 0559635956
PORTUGALASPLA PORTUGAL EMBALAGENS PLÁSTICAS, LDA.Rua Dos Comediantes, 11C2910-468 SETÚBAL (Portugal)Phone no. +351 265521350 - Fax no. +351 265521355
MOROCCOALVAPLAST MAROC, S.A.R.L.41, ANGLE BD ZERKTOUNI ET SQUAR DE L’ABÉERÉSIDENCE LISTIKRAR 5ÉME ÉTAGE Nº 2086153 CASABLANCA (Morocco)Phone no. +212 522 298 080 - Fax no. +212 522 296 080 TURKEYALVAPLAST TARIM PLASTIK SAN.TIC.LTD.STI.ETILER MAH. 880 SOK. VAHIT IBRAHIMDOGANER APT. Nº8 K:1 D:507100 ANTALYA (Turkey)Phone no. +90 2423441038 - Fax no. +90 2423441058info@alvaplast.com.tr www.alvaplast.com.tr MEXICOALVAPLAST, S.A. DE CVCalle Tepezala Nº 338FRACC. EL PLATEADO20137 AGUASCALIENTES (Mexico)Phone no. + 52 4491530309
FOLD x8
CLOSED TUBE
top related