voss gesamtkatalog en - vosschemie · products for best solutions. vosschemie has many years of...
Post on 28-Nov-2018
215 Views
Preview:
TRANSCRIPT
CATALOGUE INDUSTRY:
IND
US
TR
YC
AT
AL
OG
UE
Art
.-N
r. 7
06.5
23
Vosschemie GmbH
Esinger Steinweg 50
25436 Uetersen
Germany
Phone: +49 (0) 4122 / 717 -0
Fax: +49 (0) 4122 / 717 -158
info@vosschemie.de
Vosschemie GmbH
Wellerswalder Weg 24
04758 Oschatz
Germany
Phone: +49 (0) 3435 / 6202 -58
Fax: +49 (0) 3435 / 6202 -62
www.vc-24.de
www.vosschemie.de
The information is intended as a guide to application and is based on current information.
The information is offered in good faith and without guarantee or liability. Product specifications subject to change and availability.
© VOSSCHEMIE 2008, 1. Auflage
Products forbest solutions.
VOSSCHEMIE has many years of experience in handling unsaturated
polyesters and polyurethanes as well as epoxides and silicones. In these
product fields we formulate a variety of different solutions for our clients,
always directed towards the ever rising demands of the market.
As a system provider, we complete our assortment with products
from well known producers from all over the world. Our product range
is supplemented by auxiliary materials, tools and processing machines.
Through personal technical advice we assure that our customers
receive exactly the products, which are suitable for their application.
Our recipe for successful business.
FROM PRODUCT DEVELOPERTO SYSTEM PROVIDER
Founded in 1955 VOSSCHEMIE is today an
internationally active enterprise with 57 partners worldwide.
The name VOSSCHEMIE represents intelligent and practical
solutions for many sectors.
QUALITY FROM OWNDEVELOPEMENT
We provide high-quality products that are made and developed
in our own facilities.Today our product line consists
of more than 1500 products.
COMPETITIVE PLAYERIN THREE BUSINESS SEGMENTS
VOSSCHEMIE serves customers through three business units,
which increase speed and efficiency by sharing
technological, manufacturing, marketing and other resources.
> BU Industry > BU Automotive> BU Retail
: OUR CORE BUSINESS
> Unsaturated Polyester
> Reinforcements
> Polyurethane
> Fillers
> Epoxy
> Silicone
> Cleaning, Care & Release Agents
> Tools & Accessories
> Personal Safety
: DISTRIBUTION PARTNERS
Index
Unsaturated Polyester .............................. 7
Fillers ........................................................ 23
Polyurethane............................................. 33
Epoxy........................................................ 51
Silicone ..................................................... 59
Cleaning, Care & Release Agents............. 69
Tools & Accessories.................................. 81
:
UNSATURATED POLYESTER
Properties
Mechanical and Electrical PropertiesThe UP-SYSTEM types of unsaturated resins range from brittle to tough and from rigid to flexible.
Using reinforcement fibres the strength can equal that of structural steel and provide a favourable
strength/weight ratio. At low temperatures the resins embrittle less than thermoplastics. They have
good heat resistance. E-glass reinforced laminates possess good electrical insulation properties and
dialectic behaviour as well as excellent creep or tracking resistance.
Chemical ResistanceThe UP-SYSTEM polyester resins generally have good chemical resistance to a range of chemicals
at normal concentrations. In our range you will find the suitable resin for your application.
Processing
• Unfilled resins:
As a cold curing casting resin for electronic encapsulation, casting in general and for decorative
embedding
• Filled with powder or chopped strands or glass fibre:
As fillers and bonding materials
• With fibre reinforcement: Processed by means of hand lay-up or spray-up application. They can
also be used with foil/vacuum machines, vacuum injection as well as cold and hot press moulding.
• Hollow parts: can be produced using filament winding
• Rotational means: using the centrifugal process
• Pultrusion: producing rods, pipes and other profiles
Various types of UP resins are available: General purpose laminating resins, gelcoats, sealing top-
coats, air drying coatings, bonding and embedding resins. The label UP-SYSTEM stands for a wide
range of high quality polyester resins.
Applications:
Non-Reinforced Casting Resins
• The casting of electrical and electronic components
• Decorative encapsulation and clear castings
• Producing moulds and patterns
Reinforced Casting Resins
• For vehicle production:
Car bodies, parts of car bodies such as bumpers (fenders), bonnets, spoilers and boot lids, boat
hulls, in panelling for aircraft interiors, bodies of trains, containers for sea transport etc.
• Construction work:
Translucent roofing sheets, coating roofs, external cladding panels, shop fronts and shelters,
prestige foyers in offices, airports and other areas etc.
• Hobbies and sport:
Figures for leisure and theme parks and for play equipment in childrens play grounds, waterslides
and whirlpools for swimming pools etc.
• Installations:
Oil tanks, food tanks, transport containers etc.. Using filament winding large diameter pipes are
constructed.
• Machine and tool construction:
Castings for machines, making patterns for moulds and reproducing tools etc.
• Furniture manufacture:
For manufacturing tables and chairs, for garden furniture etc.
• Theatre and film studios:
Making scenery and special props, figures etc.
• Moulding materials:
In electrical work resins are used in coil winding and encapsulation of electronic components.
Decorative mouldings for both office and household appliances.
10
Viscovoss Azur Super +
Description
Viscovoss Azur Super + is an environmental resin with a strongly reduced
styrene emission. It is a cobalt accelerated, medium reactive orthophthalic
resin for normal requirements. This low viscosity (500-600 mPa.s), thixo-
tropic resin hardens with a lower heat reaction and is hardened with MEKP.
Viscovoss Azur Super + contains a colour indicator which changes from blue
to green after the hardener has been added. When half of the processing
time is over the resin changes into a yellow colour. The resin is suited for
hand lay-up and spray-up application.
Area of application
Normal use is for laminating moulded parts and as a casting resin:
a) Glass fibre reinforced:
- Elements for the building industry
- Boat construction
- Coating of cold water tanks
- Covers for machine parts
- Furniture production
- Vehicle construction
- Mould construction
b) With filling materials:
- Polyester concrete
- Encapsulation of electric wiring
- Sculptures / surface relief patterns
Characteristics
Amount used: 1x woven fabric, 3x mat weight
Potlife: ca. 20-90 minutes depending on layer thickness
Curing agent: 1-3 % MEKP
Colour: blue (liquid); yellowish (cured)
>
>
>
Art. No. Specification
141.117 1,0 kg incl. hardener
141.119 5,0 kg incl. hardener
139.655 30,0 kg
139.656 225,0 kg
139.657 1000,0 kg
LAMINATING RESINS
Viscovoss T 40 B
Description
Viscovoss T 40 B is an accelerated neopentylglycol terephthalic-acid resin
with good chemical resistance, suitable for water temperatures up to 30°C.
T 40 B is hardened with MEKP and can be applied by means of the hand
lay-up and spray-up method.
Area of application
Construction parts and laminates affected by chemicals, high temperatures
and weather conditions:
- Swimming pools up to 30°C
- Container and pipe construction
- Chemical plants
Characteristics
Amount used: 1x woven fabric, 3x mat weight
Curing agent: 2 % MEKP
Colour: transparent
>
>
>
Art. No. Specification
124.754 5,0 kg
124.756 30,0 kg
124.757 220,0 kg
UNSATURATED POLYESTER:
1111
Viscovoss N 50S
Description
Viscovoss N 50S is a non-accelerated, low viscosity, medium reactive ortho-
phthalic resin with excellent transparency and good weathering resistance.
Glass fibre reinforced, N 50S is suitable for the hand lay-up and spray-up
method.
Area of application
Transparent moulded parts and coatings, casting resin:
a) Glass fibre reinforced:
- Dome shaped and translucent roofs for the building industry
- Transparent and tinted parts
- Decorative parts
b) With filling material:
- Decorations
Characteristics
Amount used: 1x woven fabric, 3x mat weight
Curing agent: cobalt/ MEKP
Colour: highly transparent
>
>
>
Art. No. Specification
124.956 5,0 kg
124.957 30,0 kg
124.958 220,0 kg
SPECIAL RESINS
Viscovoss KL1Polyester bonding resin
Description
KL1 is a cobalt accelerated polyester bonding resin based on orthophthalic
acid. It contains fillers and has a paste consistency. KL1 is used for bonding
and filling. When used for bonding it has good impact resistance and good
resistance to moisture and many diluted chemicals. The product is hardened
with 1 to 3 % MEKP.
Area of application
For bonding and filling:
- Cured polyester laminates
- Wood
- Aluminium
- Steel
- Stainless steel
- PVC and PUR foam
- Stone
- Concrete
Characteristics
Amount used: 1.4 kg/l
Potlife: ca. 9-24 minutes
Curing agent: 1-3 % MEKP
Colour: cream white
>
>
>
Art. No. Specification
124.730 30,0 kg
BONDING RESINS
UNSATURATED POLYESTER:
12
Viscovoss KL3Polyester bonding resin
Description
KL3 is a fibre reinforced, cobalt pre-accelerated, transparent, orthophthalic
polyester bonding resin. It has good resistance to moisture and many diluted
chemicals.
KL3 is cured with 1-3 % MEKP hardener and has a high tensile strength. It is
used in the boat, car body and building industry and where high mechanical
strength is required.
Area of application
For bonding and filling:
- Cured polyester laminates
- Wood
- Aluminium
- Steel
- Stainless steel
- PVC and PUR foam
- Stone
- Concrete
Characteristics
Amount used: 1.2 kg/l
Potlife: ca. 18-65 minutes
Curing agent: 1-3 % MEKP
Colour: transparent
>
>
>
Art. No. Specification
124.838 30,0 kg
Viscovoss KL4Polyester bonding resin
Description
KL4 is a light weight, pre-accelerated, cold curing, polyester bonding resin
based on orthophthalic acid. The adhesive has good impact resistance as
well as good resistance to moisture and many diluted chemicals.
It is cured with 1-3 % MEKP and has a low specific gravity (0.72 kg/l). KL4 is
used for bonding of sandwich core sheets in the boat, car body and building
industry, for fixing and for model construction.
Area of application
For bonding and filling:
- Cured polyester laminates
- Wood
- Aluminium
- Steel
- Stainless steel
- PVC, PUR, balsa sandwich cores
- Stone
- Concrete
Characteristics
Amount used: 0.72 kg/l
Potlife: 15 to 45 minutes
Curing agent: 1-3 % MEKP
Colour: milky white
>
>
>
Art. No. Specification
124.850 25,0 l
UNSATURATED POLYESTER:
1313
Viscovoss KL6Polyester bonding resin
Description
Viscovoss KL6 is a pre-accelerated, semi-flexible polyester bonding resin
based on orthophthalic/ isophthalic acid, formulated with glass fibres. It
cures at room temperature (18-25°C) with MEKP and has good resistance
to moisture and many diluted chemicals. It contains a blue colour indicator
which allows the control of the catalyst addition.
Area of application
Viscovoss KL6 is especially used for producing radiuses, for bonding polyes-
ter GRP parts and parts of other materials. The low development of internal
heat allows the application in thick layers.
Characteristics
Amount used: 1.09 kg/l
Potlife: ca. 15 minutes
Curing agent: 1-3 % MEKP
Colour: pale blue
>
>
>
Art. No. Specification
139.400 20,0 kg
Viscovoss KL7Polyester bonding resin
Description
Viscovoss KL7 is a pre-accelerated, flexible polyester bonding resin formu-
lated with glass fibres. It cures at room temperature (18-25°C) with MEKP
and has good resistance to moisture and many diluted chemicals. It has low
shrinkage and is suitable for filling and bonding.
Area of application
Viscovoss KL7 is used to join GRP where a thicker application is needed.
KL7 can be applied quickly without air entrapment and formation of blisters.
The low exothermic reaction prevents the distortion of the surface.
Characteristics
Amount used: 1.25 kg/l
Potlife: ca. 15 minutes
Curing agent: 1-3 % MEKP
Colour: white
>
>
>
Art. No. Specification
139.401 25,0 kg
Viscovoss KL8Polyester bonding resin
Description
VISCOVOSS KL8 is an pre-accelerated, highly flexible polyester bonding
resin formulated without glass fibres. It cures at room temperature (18-25°C)
with MEKP. It has low shrinkage and a high elongation at break. KL8 is suita-
ble for filling and bonding applications.
Area of application
- For bonding unsaturated polyester GRP
- For filling small cavities
- For thin joints when using polyurethane foam, balsa, etc.
Characteristics
Amount used: 1.3 kg/l
Potlife: ca. 30 minutes
Curing agent: 1-3 % MEKP
Colour: light blue
>
>
>
Art. No. Specification
139.402 25,0 kg
UNSATURATED POLYESTER:
14
Sanding Gelcoat (H), (S)
Description
Sanding Gelcoat is a cobalt accelerated polyester gelcoat with an excellent
sandability. The gelcoat can be cured with MEKP hardener and then be
applied like a standard gelcoat (sprayed or hand applied).
Area of application
Special gelcoat with an excellent sandability for all GRP-parts having to be
painted afterwards and for mould making using the 2-foil-vacuum-method.
Characteristics
Amount used: ca. 0.6 kg/m²
Potlife: ca. 15 minutes
Curing agent: 3 % MEKP
Colour: white or grey
>
>
>
Art. No. Specification
125.004 grey / H / 30,0 kg
136.521 grey / S-T / 30,0 kg
125.015 white / H / 30,0 kg
136.522 white / S-T / 30,0 kg
GEL- & TOPCOATS
Viscovoss G 311 SB (H)
Description
Viscovoss G 311 SB is a cobalt accelerated, light stabilized gelcoat with an
extremely high elongation at break (7,1 %), high impact strength and scratch
resistance.
The gelcoat can be pigmented with 10-25 % (preferably 15 %) UP pigment
paste. G 311 SB is hardened with MEKP.
Area of application
Parts exposed to weathering and water, parts subject to deformation, abrasi-
on or low temperatures.
Characteristics
Amount used: ca. 0.6 kg/m²
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: refer to the chart
>
>
>
Art. No. Specification
124.954 colourless / 1,0 kg incl. hardener
124.960 RAL 9010 / 1,0 kg incl. hardener
124.886 colourless / 5,0 kg
124.907 RAL 9010 / 5,0 kg
124.887 colourless / 30,0 kg
124.888 RAL 9010 / 30,0 kg
UNSATURATED POLYESTER:
1515
Viscovoss G 323 (H), (S)
Description
Viscovoss G 323 is a cobalt accelerated polyester gelcoat based on iso-
phthalic acid which is weather resistant and has a good chemical resistance
to low concentrations of acids and bases. The transparent gelcoat is
available for spray and hand application and can be pigmented by adding
5-20 % UP pigment paste. The gelcoat is also available in several colours by
ordering over 200 kg. G 323 is cured with MEKP hardener.
Area of application
Viscovoss G 323 has been formulated for various application areas, e.g. sa-
nitary, marine, tanks, etc. It is ideally suited for all applications where a good
water and weather resistance is required.
Characteristics
Amount used: 0.6 kg/m²
Potlife: ca. 10-20 minutes
Curing agent: 1.5 % MEKP
Colour: transparent
>
>
>
Art. No. Specification
140.638 hand / 20,0 kg
140.639 spray / 20,0 kg
Viscovoss N 35 BT
Description
N 35 BT is a cobalt accelerated presealing resin that is applied in two
(pigmented) layers before the topcoat is applied. The layer thickness is
thus increased and the colour opacity of the topcoat is improved. N 35 BT
is hardened with MEKP and can be pigmented with 3-10 % by weight UP
pigment paste.
Area of application
Together with the topcoat LT 35 SB for GRP coatings.
N 35 BT does not replace the last coating with LT lacquer!
Characteristics
Amount used: 200 g/m² per coat
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: clear
>
>
>
Art. No. Specification
124.829 1,0 kg incl. hardener
124.769 5,0 kg
124.770 10,0 kg
124.771 30,0 kg
124.772 225,0 kg
Viscovoss T 40 BT
Description
T 40 BT is a cobalt accelerated presealing resin. It increases the layer thick-
ness of the Viscovoss LT 40 SB topcoat. T 40 BT is hardened with MEKP
and can be coloured with 3-10 % by weight UP pigment paste. It is applied
in two layers onto the tacky or sanded laminate before the LT lacquer is
applied.
Area of application
With Viscovoss LT 40 SB topcoat for GRP coatings.
Viscovoss T 40 BT does not replace the last coating with LT lacquer!
Characteristics
Amount used: 200 g/m² per coat
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: clear
>
>
>
Art. No. Specification
124.773 5,0 kg
124.774 30,0 kg
124.775 225,0 kg
UNSATURATED POLYESTER:
16
Viscovoss LT 30 SB
Description
LT 30 SB is a cobalt accelerated, light stabilized topcoat. It shows excellent
behaviour when used externally and hardens to a tack free and mat surface.
LT 30 SB is hardened with MEKP and can be coloured by adding 5-20 % by
weight UP pigment paste.
Area of application
Mainly for weather exposed GRP laminates:
- The reverse side of all types of GRP moulded parts that are subject to low
chemical exposure
- Coatings affected by weather conditions
Characteristics
Amount used: 200 g/m²
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: clear
>
>
>
Art. No. Specification
124.778 30,0 kg
124.779 225,0 kg
Viscovoss LT 35 SB
Description
LT 35 SB is a cobalt accelerated, light stabilized topcoat. It has good
resistance to chemicals and hardens to a tack free and mat surface.
LT 35 SB is hardened with MEKP and can be coloured with 5-20 % by
weight UP pigment paste. With DMA as a promoter, it is also possible to use
LT 35 SB at low temperatures.
Area of application
GRP laminates with orthophthalic and isophthalic acid resins:
- Reverse side of GRP moulded parts
- Coating of swimming pools with a water temperature of up to 27°C
- Sandwich parts
- Collection tanks exposed to chemicals
- Chemical basins
Characteristics
Amount used: 200 g/m²
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: clear
>
>
>
Art. No. Specification
124.804 1,0 kg incl. hardener
124.780 5,0 kg
124.781 10,0 kg
124.782 30,0 kg
124.783 225,0 kg
UNSATURATED POLYESTER:
1717
Viscovoss LT 40 SB
Description
LT 40 SB is a cobalt accelerated, light stabilized topcoat. It has a very good
resistance against chemicals and hardens to a tack free, mat surface. LT 40
SB is hardened with MEKP and can be coloured with 5-20 % by weight UP
pigment paste.
Area of application
GRP laminates with terephthalic acid and neopentylglycol-terephthalic acid
resins:
- Rear side of GRP laminates
- Swimming pool coatings with a water temperature of up to 30°C
- Sandwich parts and the sheathing of boats
- Chemical tanks requiring high chemical resistance
Characteristics
Amount used: 200 g/m²
Potlife: ca. 15 minutes
Curing agent: 2-3 % MEKP
Colour: clear
>
>
>
Art. No. Specification
124.805 1,0 kg incl. hardener
124.784 5,0 kg
124.785 30,0 kg
124.786 225,0 kg
FL 505MEKP hardener
Description
FL 505 is used for rapid cold curing of cobalt accelerated polyester resins
and gelcoats. MEKP FL 505 is a 50 % solution in a stabilizing plasticizer.
Area of application
A hardener that causes rapid gelation and good hardening of cobalt accele-
rated polyester and vinylester resins:
- Laminating resins
- Casting resins
- Sealing resins
- LT lacquers
- Gelcoats
Characteristics
Amount to add: 1-3 %
Colour: clear
>
>
>
Art. No. Specification
131.002 100 g
133.851 1,0 kg
133.850 25,0 kg
HARDENERS
UNSATURATED POLYESTER:
18
FL 501/GTSMEKP hardener
Description
FL 501 is used for rapid cold curing of cobalt accelerated polyester and
gelcoat resins using the hand lay-up method. MEKP FL 501 is a 50 %
solution of methyl ethyl ketone peroxide in a stabilizing platicizer.
Area of application
A hardener that causes rapid gelation and good hardening of cobalt accele-
rated polyester and gelcoat resins:
- Laminating resins
- Casting resins
- Sealing resins
- LT lacquers
- Gelcoats
Characteristics
Amount to add: 1-3 %
Colour: clear
>
>
>
Art. No. Specification
125.683 20 g
133.852 100 g
125.685 1,0 kg
125.688 30,0 kg
BPO-hardener powder / paste
Description
BPO (benzoyl peroxide) is a peroxide for the rapid cold curing of amine
accelerated polyester resins and fillers. It leads to rapid hardening and de-
moulding even at low temperatures. At high temperatures (80-100°C) the
hardener can be used without accelerator. BPO is available as a paste or as
a powder, each with 50 % stabilizer.
Area of application
- Polyester fillers
- Resins that must cure rapidly, or at low temperatures
- Low reactive resins
Characteristics
Amount to add: 1-3 %
Colour: red or white
>
>
>
Art. No. Specification
124.631 red / 30 g
124.636 white / 30 g
124.630 red / 50 g
124.635 white / 50 g
136.859 red / 100 g
125.695 white / powder / 5,0 kg
UNSATURATED POLYESTER:
1919
Cobalt-Accelerator 1%
Description
CO 01-1 is used as an accelerator for cold curing polyester resins with
hydro-peroxides (MEKP, AAP, CHP) to provide a medium to long potlife.
Cobalt Accelerator CO 01-1 has a metal content of 1 %.
Area of application
Cold curing polyester and vinylester resins:
- Laminating resins
- Gelcoats
- Sealants
- Topcoats
Characteristics
Amount to add: 0.3-2.0 %
Colour: purple
>
>
>
Art. No. Specification
125.696 20 g
125.697 100 g
125.699 1,0 kg
125.700 5,0 kg
125.701 25,0 kg
ADDITIVES UP
Cobalt-Accelerator 10 %
Description
CO 10-1 is used as an accelerator for cold curing polyester resins together
with hydro-peroxides (MEKP, AAP, CHP) to provide a medium to long pot
life. Cobalt Accelerator CO 10-1 has a metal content of 10 %. Because of
the small quantity that is added it is only suitable for accelerating 30 kg and
larger cans. Only add the correct amount.
Area of application
Cold curing polyester and vinylester resins:
- Laminating resins
- Gelcoats
- Sealants
- Topcoats
Characteristics
Amount to add: 0.03-0.2 %
Colour: purple
>
>
>
Art. No. Specification
125.734 5,0 kg
DMA-Accelerator 10 %Amine accelerator
Description
DMA 10-1 is used for rapid cold curing of polyester resins with benzoyl pero-
xide powder or paste and results in a short potlife.
DMA 10-1 is a 10 % solution that can also be used as a promoter for cobalt
accelerated polyester and vinylester resins (e.g. at low temperatures). The
amine changes the resin to a slight yellow colour.
This product is used only for industrial purposes.
Area of application
Accelerator for rapid curing of polyester and vinylester resins in combination
with BPO hardener; promoter for the cobalt/MEKP hardening system:
- Repair resins
- Laminating resins
- Elastic roofing resins
- Topcoats
Characteristics
Amount to add: up to 3 %
Colour: yellowish clear
>
>
>
Art. No. Specification
125.702 1,0 l
UNSATURATED POLYESTER:
20
MB-12Cobalt amine accelerator
Description
MB-12 is an accelerator that contains cobalt and amine for use with polyes-
ter and vinylester resins. Can be hardened with either MEKP, AAP or BPO.
With MEKP – MB-12 has a potlife of 2.5 to 8 minutes (inhibitor is often used
when MEKP or AAP is added). With BPO the potlife is 1.5 hours. The accele-
rator has a 2 % cobalt and 10 % DMA content and causes a slight yellowish
colour. MB-12 is intended only for industrial use.
Area of application
An accelerator that provides good cure with MEKP and AAP even in thin
laminates:
- Laminating resins
- Gelcoats (certain conditions)
- Sealants
- Topcoats (certain conditions)
Characteristics
Amount to add: 0.3-2 %
Colour: purple
>
>
>
Art. No. Specification
135.744 1,0 kg
134.314 25,0 kg
Inhibitor P1
Description
P1 is used to lengthen the potlife of accelerated polyester resins. With P1
it is possible to post-stabilize resins in order to lengthen their storage life at
normal temperatures.
Area of application
To lengthen the potlife of pre-accelerated polyester resins; to improve their
storage life:
- Resins for vacuum and filament winding processes
- Post-stabilization of resins in warm climates
- Polyester fillers
Characteristics
Amount to add: ca. 1 % to double the potlife
Colour: clear
>
>
>
Art. No. Specification
125.718 1,0 l
125.719 10,0 l
PL 5-1Paraffin solution
Description
The paraffin solution is a 5 % solution of liquid paraffin in styrene. It is added
to polyester resins to obtain a tack free surface. PL 5-1 only has an effect
with an ambient temperature of 18 to 25°C.
If a further resin layer is applied, the paraffin layer must be well sanded off.
Area of application
An additive to improve the surface curing of polyester resins:
- Topcoats
- Tack free curing of laminating resins
Characteristics
Amount to add: 2.5-3.0 %
Colour: clear
>
>
>
Art. No. Specification
130.833 1,0 l
130.832 20,0 kg
UNSATURATED POLYESTER:
2121
TX1Thixotropic powder
Description
TX1 ist used for thickening polyester resins to prevent drainage on vertical
surfaces. The powder must be mixed thoroughly with the polyester resin.
It should be used when no other resin is to come into contact with the pro-
duct, as thixotropic paste contains resin.
Area of application
Thixotropic agent for polyester resins:
- Laminating resins
- Sealants
- Gelcoats
- Roof resins
Characteristics
Amount to add: 0.5-3.0 % by weight
Piled density: ca. 50 g/l
Colour: whitish
>
>
>
Art. No. Specification
125.868 0,1 kg
125.462 10,0 kg
AerocellLight weight filling material
Description
Aerocell is a filling material that consists of micro glass balloons. It is used
to produce a light weight filling compound for epoxy and polyester resins.
By adding 10 % (by weight) a paste of low thixotropy is made whereas with
a 20-30 % addition the resin is highly thixotropic. The resin mixture has a
whitish colour.
Area of application
To produce a light weight filling compound out of epoxy and polyester resins:
- Fills holes and small cavities
- Repair of foam cores of surfboards
- To fill bonding resins used to construct wooden boats
Characteristics
Amount to add: 10-30 % by weight
Piled density: 130 g/l
Colour: white
>
>
>
Art. No. Specification
126.185 0,2 kg
125.770 4,0 kg
139.986 27,2 kg
Talcum Powder
Description
Talcum is used to fill polyester and epoxy resins to produce (amongst other
things) artificial stone and fillers. Talcum reduces shrinkage during cure. It
improves the sandability of fillers, but reduces the hydrolytic resistance.
Talcum does not contain asbestos or quartz.
Area of application
A powder filler for polyester and epoxy resins:
- Reduces shrinkage of resin systems
- Improves mechanical properties
- Thickens resins
Characteristics
Piled density: ca. 700 g/l
Consistency: powder
Colour: grey-white
>
>
>
Art. No. Specification
139.985 25,0 kg
UNSATURATED POLYESTER:
FILLERS
Polyester Fillers
Polyester fillers have been produced by VOSSCHEMIE GmbH for more than 50 years. During this
time VOSSCHEMIE GmbH has become one of the leading producers of car repair fillers in Europe
as well as overseas. This has been achieved by developing new types of fillers as well as constantly
improving existing formulations. Our fillers are used mainly for car repair.
Under the label UP-SYSTEM (UPS) we arranged the fillers, which are especially used for producing
patterns and moulds, for surface finish of GRP mould parts before painting or for repairing GRP parts.
In addition, we offer for large-scale consumers dispensing systems for fillers and BPO hardeners
in industry cartridges as well as suitable fillers which are immersed in water, for GRP repair and for
producing moulds and models.
Properties
Because of ever increasing labour costs all our fillers have been formulated to apply and sand easily
so as to provide a surface ready to paint. These properties are much appreciated by the people who
work with these materials every day.
Almost all (98 %) of the polyester fillers we produce are hardened with Benzoyl Peroxide (mainly red)
paste. Because of its red colour it is easy to mix evenly as a car body filler must have a short curing
time i.e. be sandable after 15-20 minutes.
We are confident that you will be able to select the right filler for your requirements from our product
range.
Technical DataPolyester fillers normally contain 30-40 % polyester resin which is amine accelerated. It is cured by adding
1-5 % BPO hardener (usually 2-3 %). Fillers also contain mineral filling materials and pigments. Amongst
these are talc and titanium dioxide.
26
UPS FEWPolyester finishing filler white
Description
UPS FEW is a sandable, thixotropic surfacing filler providing a very smooth
and dense surface. It is used for fine surfacing of uneven surfaces and for
smoothing out various materials. UPS FEW is hardened with BPO and is
sandable after 15 minutes.
Area of application
Filling both shallow and deep dents, surfacing general purpose fillers:
- As a polyester stopper for surfacing fillers prior to painting
- On doors, windows both wood and metal prior to painting
- Boat repairs above the waterline
Characteristics
Amount used: 1.8 kg/l
Potlife: ca. 4 minutes
Curing agent: 1-3 % BPO paste
Colour: cream white
>
>
>
Art. No. Specification
143.794 0,5 kg incl. hardener
143.795 1,0 kg incl. hardener
143.796 2,0 kg incl. hardener
143.820 2,3 kg incl. hardener
143.819 19,29 kg excl. hardener
124.620 310 g BPO hardener red
UPS KK-PlastPolyester body filler
Description
UPS KK-Plast is a thixotropic general purpose filler. The material has high
build strength and its main purpose is to smooth out dented metal. UPS KK-
Plast is cured with BPO hardener and can be sanded afer 15 minutes.
Area of application
Levelling out deep dents and depressions on metal, wood, GRP, concrete
etc:
- Car body repairs
- Filling material to repair damage or cracks in wood and concrete
- Repairing GRP laminates
Characteristics
Amount used: 1.8 kg/l
Potlife: 4 minutes
Curing agent: 2-3 % BPO paste
Colour: grey
>
>
>
Art. No. Specification
143.789 0,5 kg incl. hardener
143.788 1,0 kg incl. hardener
143.787 2,0 kg incl. hardener
144.033 40,0 kg excl. hardener
124.617 1,0 kg BPO hardener clear
FILLERS:
2727
UPS LightplastPolyester lightweight filler
Description
UPS Lightplast is a thixotropic filler with a low specitic gravity (0.7 kg/l). The
material is easy to use and can be nailed or screwed. UPS Lightplast is also
a very effective filler for wood including M.D.F. due to its very easy sanding
and carving properties. It also accepts normal wood stains. UPS Lightplast
is hardened with BPO and can be sanded after 20 to 30 minutes.
Area of application
Filling and contouring of lightweight parts or where particularly easy shaping
is required, wood etc:
- Filling, levelling and moulding material for lightweight applications and for
model construction
- Repair filler for lightweight building elements
- Repair material for the cores of sandwich laminates
(except polystyrene foam)
- Moulding and finishing filler in orthopaedics
Characteristics
Amount used: 0.7 kg/l
Potlife: ca. 5 minutes
Curing agent: 2-4 % BPO paste
Colour: off white
>
>
>
Art. No. Specification
124.317 700 g incl. hardener
UPS V-11Polyester glass fibre filler
Description
UPS V-11 is a thixotropic, filling and bonding compound with added glass
fibre. The material has low shrinkage and greater strength than a normal
filler. V-11 is hardened with BPO and should be coated with another filler
or topcoat because of its tacky surface. If V-11 is applied onto metal, it is
necessary to prime the surface with a polyester filler.
Area of application
Filling and levelling damaged metal, bridging larger gaps and holes, bonding
wood:
- Reinforcement of corroded metal surfaces (with an adhesive primer)
- Bonding wood and GRP parts where greater strength is required
- Filling and repairing damaged wood
Characteristics
Amount used: 1.35 kg/l
Potlife: ca. 4 minutes
Curing agent: 1-3 % BPO paste
Colour: brownish yellow
>
>
>
Art. No. Specification
143.790 400 g incl. hardener
143.791 1,3 kg incl. hardener
FILLERS:
28
UPS Ferro-FaserPolyester glass fibre filler
Description
UPS Ferro-Faser is a thixotropic filler with chopped glass fibre strands. The
material has low shrinkage and a greater strength than a normal filler. It can
be used for bridging rustholes as well as for filling deep depressions. UPS
Ferro-Faser is hardened with BPO. Ferro-Faser is applied onto a sanded
surface that must be primed with a regular body filler. To obtain a tack free
surface, Ferro-Faser should be coated with another polyester filler or wiped
off with solvents or be sanded.
Area of application
For filling and levelling of dents, holes and wide joints on metal, GRP, wood
etc.:
- Repairing corroded metal (with adhesive primer)
- Levelling out deep dents
- Contouring models
Characteristics
Amount used: 1.36 kg/l
Potlife: 3 to 4 minutues
Hardening paste: 2 to 3 % BPO paste
Colour: yellow
>
>
>
Art. No. Specification
124.343 29,0 kg
UPS Ferro-GlasPolyester fibre glass reinforced filler
Description
UPS Ferro-Glas is a further development of fibre putty.
- Improved sanding characteristics
- Spreads more smoothly and homogeneously
- Highly concentrated filler
- Adhesion to metallic bases
- For repairing small rust spots
Area of application
For filling deep imperfections and dents.
Characteristics
Amount used: 1.78 kg/l
Potlife: ca. 4 minutes
Curing agent: 2-3 % BPO paste
Colour: green
>
>
>
Art. No. Specification
143.821 2,2 kg incl. hardener
UPS Ferro-MultiPolyester multi functional filler
Description
UPS Ferro-Multi is a multi functional filler with good adhesion to galvanized
steel, aluminium, steel and tin-plated surfaces. It is easy to apply and fills
pinholes and other imperfections.
Area of application
Due to its consistency it can be used both for general filling purposes and
for very fine applications.
Characteristics
Amount used: 1.76 kg/l
Potlife: 3-5 minutes
Curing agent: 2-3 % BPO paste
Colour: beige
>
>
>
Art. No. Specification
143.817 2,3 kg incl. hardener
FILLERS:
2929
UPS Ferro-SprayPolyester spray filler
Description
UPS Ferro-Spray is a thixotropic spray filler with high filling capability for
metal, GRP and wood. It is applied with a spray gun (2.5 mm nozzle). UPS
Ferro-Spray is thinned with max. 5 % Spray-Thinner before applying the
final coat to reduce the viscosity and to provide a very smooth surface which
minimizes the sanding work.
Before sanding the surface should be allowed to harden for 3-5 hours, or for
30 minutes when post cured at max. 60°C. The surface must be coated with
an acrylic based filler prior to painting.
Area of application
For filling and surfacing metal, GRP and wood:
- Body panels
- GRP parts
- Wooden moulds
- Chipboard and MDF (medium density fibreboard)
Characteristics
Amount used: 1.7 kg/l
Potlife: 25 minutes
Curing agent: 3.5 % CHP hardener
Colour: grey
>
>
>
Art. No. Specification
143.815 1,5 kg incl. hardener
124.315 transparent / 1.0 l tin spray filler thinner
UPS Ferro-AluPolyester body filler
Description
UPS Ferro-Alu is a filling and spreading putty containing aluminium.
- Very easy to apply
- Special viscosity, enabling it to be applied in many required coat thicknesses
Area of application
For filling deep imperfections and dents.
Characteristics
Amount used: 1.76 kg/l
Potlife: ca. 4-5 minutes
Curing agent: 2-3 % BPO paste
Colour: silver
>
>
>
Art. No. Specification
143.813 2,3 kg incl. hardener
UPS Ferro-FixPolyester body filler
Description
UPS Ferro-Fix is an easy sanding polyester body filler. It has a creamy con-
sistency and is based on fine filling materials. It is very easy to apply. Also
suitable for filling deeper dents on vertical and horizontal surfaces.
Area of application
For filling dents and repaired bare metal surfaces on vehicle bodies.
Characteristics
Amount used: 1.83 kg/l
Potlife: ca. 4 minutes
Curing agent: 1-3 % BPO paste
Colour: grey
>
>
>
Art. No. Specification
143.818 2,3 kg incl. hardener
FILLERS:
30
UPS Ferro-TopPolyester brushable filler
Description
UPS Ferro-Top is a thixotropic filler for filling shallow, uneven or curved
surfaces, or masking glass fibre pattern. It can be applied to metal, GRP and
wood surfaces. Ferro-Top is hardened with BPO paste and is sandable after
15 minutes. To obtain a dense, pinhole free surface Ferro-Top is applied with
a brush.
Area of application
For filling small imperfections on metal, GRP or wood surfaces:
- For surfacing general purpose body fillers
- Smoothing surfaces on prototypes and models
Characteristics
Amount used: 1.6 kg/l
Potlife: ca. 5 minutes
Curing agent: 2 % BPO paste
Colour: beige
>
>
>
Art. No. Specification
143.816 1,5 kg incl. hardener
UPS Model FillerPolyester knifing filler
Description
UPS Model Filler is a reddish brown high viscosity filler. It is easy to apply
and has a low specific gravity. It was developed for producing patterns and
moulds, both large and small. If the filler is to be painted it must first have a
coat of a finishing or spray filler. The filler is mixed with BPO paste and can
be worked upon after 15 minutes.
Area of application
Making, contouring and repairing models and patterns:
- Models for tool production
- Designs for automobile prototypes
- Repairs to wooden patterns
Characteristics
Amount used: 1.2 kg/l
Potlife: ca. 10 minutes
Curing agent: 1-3 % BPO paste
Colour: reddish brown
>
>
>
Art. No. Specification
124.298 2,5 kg incl. hardener
YC Nautic FillerPolyester boat filler
Description
YC Nautic Filler is a two component filler material exclusively for water-
stressed laminates of glass fibre polyester plastic. YC Nautic Filler may be
applied and hardened with a thickness of only 1 mm per single application.
This coat can be sanded after a drying time of min. 3 hours.
Areas primed with YC Nautic Filler must be covered with two sealing coats
and one top coat.
If YC Nautic Filler has not been over-coated, it can react with GRP-Primer or
the antifouling agent.
Area of application
- Smoothes glassfibre polyester boat hulls in cold water areas
- Smoothes swimming pools and garden ponds made of polyester laminate
and filled with cold water
Characteristics
Amount used: 1.6 kg/l
Potlife: ca. 15 minutes
Curing agent: BPO paste
Colour: grey
>
>
>
Art. No. Specification
124.411 500 g incl. hardener
FILLERS:
3131
UPS Zinc FillerPolyester multi functional filler
Description
UPS Zinc Filler is a multi functional adhesive polyester filler.
- Adhesion to galvanized steel
- Adhesion to aluminium and steel surfaces
- Adhesion to tin-plated surfaces
- Highly concentrated
- Very easy and pinhole free to apply
- Excellent sanding properties
Area of application
Due to its excellent adhesion properties UPS Zinc is a multi functional filler
and can be used both as a surface and fine filler.
Characteristics
Amount used: 1.8 kg/l
Potlife: ca. 4-5 minutes
Curing agent: 2-3 % BPO paste
Colour: beige
>
>
>
Art. No. Specification
143.792 250 g incl. hardener
UPS Fill 21-1Polyester body filler
Description
UPS Fill is a highly viscous body filler that enables thick layers to be applied
on both vertical and horizontal surfaces. It hardens rapidly to a tack free
surface and sands easily.
Area of application
For filling dents and repaired bare metal surfaces.
Characteristics
Amount used: 1.9 kg/l
Potlife: ca. 4 minutes
Curing agent: 2-3 % BPO paste
Colour: grey
>
>
>
Art. No. Specification
143.793 2,0 kg incl. hardener
UPS Ferro-Multi-PlusPolyester multi functional filler
Description
This product is a multi functional polyester filler, which guarantees direct
adhesion to galvanized, aluminium and sheet steel surface without the need
of using a primer.
Due to its creamy consistency this product is the optimum filler both for
general filling purposes and for very fine, smooth, pinhole and tack free ap-
plications. This filler saves working time because it dries rapidly and is very
quick and easy to sand.
Area of application
For filling dents and repaired metal surfaces.
Characteristics
Amount used: 1.6 kg/l
Potlife: ca. 4 minutes
Curing agent: 1-3 % BPO paste
Colour: light grey
>
>
>
Art. No. Specification
143.814 2,0 kg incl. hardener
FILLERS:
POLYURETHANE
Properties · Processing · Application
Polyurethanes have good weather resistance but most turn slightly yellow. Their resistance to many
normal chemicals is known, but it is safest to make a practical test first.
Among others, polyurethane is not resistant to the following chemicals: acetone, many organic acids
(acetic acid), ammonia, methanol, methylene chloride, high concentrate mineral acids (nitrate, sul-
phur, salt, phosphoric acid).
Polyurethane Coatings
One component coatings are tough, have good adhesive strength and high abrasion resistance. The
material usually contains a solvent, is applied with a roller or sprayed (using a fresh air protective
mask). After the solvent has evaporated a reaction occurs with the moisture (in the air or substrate)
which leads to a duroplastic cross linkage.
The one component polyurethane is used as a concrete coating or as a bonding agent for GRP on
wood, mineral materials and steel – not stainless steel. It is also used as a paint coat on these ma-
terials. Pigmented polyurethanes have good abrasion and chemical resistance and are used as floor
coatings in warehouses and production halls, workshops, garages and as protection for concrete on
feeding containers and portable silos in the agricultural market.
The mechanical properties of the two component coatings can be altered by adding filling materials
to the A component. The viscosity increases gradually. The material is used as a casting or coating
compound and is applied by hand or machine.
They are used for mouldings or cores in the concrete and electronic industry and as mould compo-
nents in the technical field.
They can be applied as a thick coat to protect metals from abrasion or corrosion and polystyrene
foams from mechanical and chemical attack.
Self levelling coating systems are used for industrial floors exposed to high stress.
Polyurethane Foams
Polyurethane foams (PUR foams) can be hard, medium hard or flexible, with or without a skin. They
are available as one or two component foams, each type with a very different density, start time and
mechanical properties.
Duroplast polyurethanes (PUR) are one and two component coating, casting and foam materials.
The two component casting materials possess varying mechanical properties such as elasticity,
surface hardness and high tear strength.
One component foams have a density of 22 to 30 kg/m³ and can withstand a shear force of up to
1 kg/cm². They are available in aerosol cans containing a CFC free blowing agent. One component
foams harden by absorbing air moisture (as do the 1 component coatings). 1 component foams are
certified B2 as a building material according to DIN 4102 and are predominantly used for fixing and
sealing doors, window frames and around pipework.
Two component foams are CFC free and have a density of 10 kg/m³ (foam packaging) up to 700
kg/m³. Their properties are therefore very different.
They are mixed by hand or mechanically stirred and are poured into a mould or cavity. PUR foams
can also be sprayed onto the surface that is to be coated or insulated. Foams with a density up to
20 kg/m³ are used for foam packaging and insulation.
Hard foams with 40 to 60 kg/m³ are used for insulation both thermal and noise and filling buoyancy
chambers in boats and floating jetties. Sandwich cores are used for GRP or aluminium panels.
A spray foam that has at least 39 kg/m³, certified B2, can be used in the building industry.
Hard foams from 60 kg/m³ upwards can be walked on and are used on roofs (only those applied in
the building industry) and as a filling agent for buoyancy chambers.
Self supporting small castings and patterns can be made out of hard foam that has a density of 75
kg/m³ (structural foam). A foam with a density of 200 kg/m³ upwards can be nailed or screwed and is
used in the orthopaedic sector.
The compressive strength of soft foams can be altered by adjusting their density. They are used as
structural foam parts in the upholstery and vehicle industry (seat padding).
36
B Component Type IIPolyurethane B component
Description
B component Type II contains diphenylmethane-4.4’-diisocyanate (MDI)
and is used to cure 2 component polyurethane foams and systems. It is
important to work according to the mixing ratio given on the matching A
component to obtain the product properties and to prevent free isocyanate
or polyol particles in the cured product.
Area of application
To harden 2 comp. polyurethane foams:
- Unizell HR-AT / HR77-AT / H 40 B2
- Structural Foam H50-AT / H75-AT
- Structural Foam H200-AT / H400-AT
2 comp. polyurethane systems:
- Elastocoat C6770/1
- Elastocoat C6781
- Elastocoat C6782
- Flexovoss K14
Characteristics
Colour: brown
>
>
>
Art. No. Specification
126.309 1,0 kg
126.310 5,0 kg
126.311 10,0 kg
126.313 200,0 kg
FOAMS
HR-ATPolyurethane filling and insulation foam
Description
HR-AT is a CFC free, at least 91 % closed cell, 2 component hard foam
based on polyurethane with a cup density of ca. 50 kg/m³. It has a long reac-
tion time and can be mixed and poured by hand even in large amounts up to
ca. 10 kg. Mechanical processing reduces density and start time.
HR-AT is mixed with the B component Type II and is resistant to diluted
acids, bases and water.
Area of application
Hard, closed cell foam components and cavity filling:
- Thermal insulation
- Deep freeze insulation
- Buoyancy chambers in boats
- Filling of small buoys and life belts (unsinkable)
- Sandwich cores
- Providing stiffness
- Insulation to reduce sound
Characteristics
Amount used: ca. 50 g/l
Start time: ca. 37 seconds
Mixing ratio A:B = 100:145 parts by weight
Colour: yellowish
>
>
>
Art. No. Specification
126.338 0,7 kg
126.341 3,5 kg
126.342 10,0 kg
POLYURETHANE:
3737
HR77-ATPolyurethane cavity filling and insulating
foam Description
HR77-AT is a CFC free, closed cell, 2 component hard foam based on
polyurethane with a very fine pore structure. It has a cup density of ca. 75
kg/m³ and can be mixed and poured by hand due to the long reaction time.
Machine processing reduces the density and start time.
HR77-AT is resistant to diluted acids, bases and water. The B component
Type II is used.
Area of application
Moulded parts and cavity filling:
- Filling cavities
- Filling material for use in taxidermy
- Model heads for wigs
- Increasing stiffness of sandwich construction
- Parts for model construction
Characteristics
Amount used: ca. 75-50 g/l
Start time: ca. 40 seconds
Mixing ratio A:B = 100:145 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
126.327 0,7 kg
126.328 3,5 kg
126.329 10,0 kg
126.330 200,0 kg
H50-ATPolyurethane structural foam
Description
H50-AT is a relatively light, closed cell, CFC free, 2 component hard foam
that cures with a non porous skin when poured into a mould. The foam has a
cup density of ca. 50 kg/m³ and can be mixed and poured by hand because
of its long start time. Mechanical stirring reduces the density and start time.
If a large amount is poured into a closed mould, the density and pressure ex-
erted against the mould increases. H50-AT is foamed with the B component
Type II and is resistant to diluted acids, bases and water.
Area of application
Hard and shapeable components with a non porous surface and a low
density:
- Parts for model construction
- Decorative parts
- Filling material
- Precision components
- Models for design and prototypes
Characteristics
Amount used: ca. 50 g/l
Start time: ca. 40 seconds
Mixing ratio A:B = 100:150 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
126.324 10,0 kg
126.325 200,0 kg
POLYURETHANE:
38
H75-ATPolyurethane structural foam
Description
H75-AT is a CFC free, closed cell, 2 component hard foam that cures to a
non porous surface when poured into a mould. It has a cup density of ca.
75 kg/m³ and can be mixed and poured by hand as it has a long start time.
Mechanical mixing reduces the density and start time. If a large amount is
poured into a closed mould, the density and pressure exerted on the mould
increases. H75-AT is mixed with the B component Type II and is resistant to
diluted acids, bases and water.
Area of application
Hard and shapeable components with a non porous surface:
- Lids
- Shells
- Reliefs
- Figures
- Decorative parts
- Filling material for use in taxidermy
- Models
- Components for precision castings
Characteristics
Amount used: ca. 75 g/l
Start time: ca. 60 seconds
Mixing ratio A:B = 100:145 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
126.315 0,7 kg
126.316 3,5 kg
126.302 10,0 kg
126.322 200,0 kg
H200-ATPolyurethane structural foam
Description
H200-AT is a CFC free, closed cell, 2 component hard foam. It cures to a
non porous surface when poured into a mould. The foam has a cup density
of ca. 200 kg/m³, good mechanical strength and can be nailed or screwed.
It can be mixed and poured by hand as it has a long start time. Mechanical
stirring reduces the density and start time. A large amount poured into a
closed mould increases the density and the pressure exerted against the
mould. H200-AT is used with the B component Type II and is resistant to
diluted acids, bases and water.
Area of application
Shapeable components subject to high stress and a non porous surface:
- Lids
- Doors
- Arm chair shells
- Casings for machine and other apparatus
- Car body parts
- Models
Characteristics
Amount used: ca. 200 g/l
Start time: ca. 65 seconds
Mixing ratio A:B = 100:100 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
126.339 1,0 kg
126.340 10,0 kg
126.323 200,0 kg
POLYURETHANE:
3939
H400-ATPolyurethane structural foam
Description
H400-AT is a CFC free, closed cell, 2 component hard foam that cures to a
non porous surface when poured into a mould. The foam has a cup density
of ca. 400 kg/m³ and very good mechanical strength. Due to its long reaction
time it can be mixed and poured by hand easily. Mechanical stirring reduces
the density and start time. A large amount poured into a closed mould
increases the density and the pressure exerted against the mould. H400-AT
is used with the B component Type II and is resistant to diluted acids, bases
and water.
Area of application
Mechanically shapeable components with a non porous surface that can be
subjected to high stress:
- Orthopaedic components
- Lids
- Doors
- Arm chair shells
- Casing for apparatus
Characteristics
Amount used: ca. 400 g/l
Start time: ca. 70 seconds
Mixing ratio A:B = 100:100 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
126.364 1,0 kg
126.365 10,0 kg
126.295 200,0 kg
H 40 B2Polyurethane cavity filling and insulating
foam Description
H 40 B2 is a CFC free, closed cell, 2 component hard foam based on poly-
urethane. The foam is used to fill cavities, to produce large fibre resin struc-
tures e.g. for refrigerated storage houses. The strength of the insulation is
about 20-170 mm. The foam is certified B2 as a building material according
to DIN 4102 (normally inflammable).
H 40 B2 is mixed with the B component Type II.
Area of application
Closed cell foam components and cavity filling:
- Thermal insulation
- Deep freeze insulation
- Insulation to reduce sound
- Filling cavities
- Large fibre resin structures
Characteristics
Amount used: ca. 39 g/l
Start time: ca. 24 seconds
Mixing ratio A:B = 100:135 parts by weight with B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
139.856 5,0 kg
139.855 200,0 kg
POLYURETHANE:
40
WR-ATPolyurethane elastic and soft foam
Description
WR-AT is a CFC free, elastic, 2 component, soft, open cell polyurethane
foam. It has a cup density of ca. 55 kg/m³, a short reaction period and is
mainly mixed and poured by machine. The foam is processed by hand only
in small quantities. WR-AT is resistant to diluted acids and bases.
Area of application
Soft and elastic components and fillings:
- Light weight cushions
- Padding
- Headrests
- Sound insulation
- Shock absorbing parts
Characteristics
Amount used: ca. 55 g/l
Start time: ca. 30 seconds
Mixing ratio A:B = 100:48 parts by weight
Colour: yellowish
>
>
>
Art. No. Specification
126.282 A-component / 200,0 kg
126.283 B-component / 250,0 kg
ZR-ATPolyurethane elastic foam
Description
ZR-AT is a CFC free, open cell, elastic yet tough 2 component foam. It has a
cup density of ca. 60 kg/m³, a short reaction period and is mainly processed
by mechanical stirring. The foam is only mixed by hand in small quantities.
ZR-AT is used with the ZR B component and is resistant to diluted acids and
bases.
ZR B component contains toluylene diisocyanate (TDI).
Area of application
Elastic, tough components with a higher compressive strength:
- Elastic parts (without a skin)
- Harder, more stressed parts for the upholstery industry
- Sound insulation
- Shock absorbing parts
Characteristics
Amount used: ca. 60 g/l
Start time: ca. 10 seconds
Mixing ratio A:B = 100:150 parts by weight
Colour: yellowish
Processing equipment
CAUTION! POISONOUS! This product is for industrial use only.
>
>
>
>
Art. No. Specification
126.319 A-component / 200,0 kg
126.320 B-component / 200,0 kg
POLYURETHANE:
4141
Flexovoss K6S & K6TPolyurethane casting, coating and moul-
ding material Description
K6 is a two component, self levelling (S) or thixotropic (T) product. It is ela-
stic (65 % elongation at break), has good resistance to diluted acids, bases
and water. K6 does not contain plasticizer.
The B component is K6 S-T-H. It cures with low shrinkage and can be used
down to -20°C when cured.
Area of application
Tough, elastic casting material:
- Electronic encapsulation
- Machine parts
Coating of:
- Polystyrene and PUR foam
- Wood (with G4 primer)
- Metal (with G4 primer)
- Concrete (with G4 primer)
- Thermoplastics (restricted)
- Glass fibre plastics
Tough, elastic moulds for:
- Ready mixed concrete
- Concrete plates
Characteristics
Amount used: 1.5 kg/l
Potlife: ca. 30 minutes
Mixing ratio A:B = 100:25 parts by weight with K6 S-T-H B comp.
Colour: grey/beige
Processing equipment
K6 is applied with a brush or wool roller, K6S with a spray gun, using brea-
thing protection.
>
>
>
>
Art. No. Specification
126.440 K6-S / 1,0 kg incl. hardener
126.442 K6-S / 5,0 kg incl. hardener
126.446 K6-S / 30,0 kg incl. hardener
126.455 K6-T / 1,0 kg incl. hardener
126.457 K6-T / 5,0 kg incl. hardener
126.461 K6-T / 30,0 kg incl. hardener
SOLID SYSTEMS - CASTING SYSTEMS
Flexovoss K6HPolyurethane coat
Description
K6H is a 2 component thixotropic product. It cures with minimal shrinkage,
has a high chemical resistance (fuel oil, diesel) and does not contain plas-
ticizer. The B component K6 S-T-H is used. K6H is applied with a brush or
wool roller.
Area of application
Fuel oil resistant coating for:
- Fuel oil and diesel tanks of steel, aluminium (restricted) and GRP (additional
inside coating)
- Collecting trays for environment protection purposes
Characteristics
Amount used: 1.6 kg/m² for 2 coats
Potlife: ca. 40 minutes
Mixing ratio A:B = 100:25 parts by weight with K6 S-T-H B comp.
Colour: grey
>
>
>
Art. No. Specification
126.434 1,0 kg incl. hardener
126.436 5,0 kg incl. hardener
126.438 30,0 kg incl. hardener
POLYURETHANE:
42
Flexovoss K7Polyurethane casting and coating material
Description
K7 is a two component, self levelling, high abrasion and impact resistant
product with a tough surface. It is resistant to diluted acids, bases, water,
mineral oil and does not contain plasticizer.
K7 is cured with K7 B component and applied with a brush or wool roller.
Area of application
Highly abrasion resistant parts:
- Core models for sand casting
Coating:
- Metal (with G4 primer)
- Wood (with G4 primer)
- Concrete (with G4 primer)
- Polystyrene foam
Characteristics
Amount used: 1.8 kg/m²
Potlife: ca. 30 minutes
Mixing ratio A:B = 100:20 parts by weight
Colour: red brown
>
>
>
Art. No. Specification
126.477 1,0 kg incl. hardener
126.480 5,0 kg incl. hardener
126.483 30,0 kg incl. hardener
Flexovoss K9 NPolyurethane mould and casting material
Description
K9 N is a permanent elastic (ca. 100 % elongation at break), low shrinkage,
two component casting compound that contains plasticizer. It is cured with
K9 N B component and is resistant to water, diluted acids and bases.
Area of application
Elastic patterns and moulds for:
- Exposed concrete cladding
- Concrete parts
- Casting polyurethane and polyester (small production runs)
Characteristics
Amount used: 1.4 kg/l
Potlife: ca. 50 minutes
Mixing ratio A:B = 100:11 parts by weight
Colour: grey
>
>
>
Art. No. Specification
126.502 1,0 kg incl. hardener
126.491 10,0 kg incl. hardener
126.494 30,0 kg incl. hardener
Flexovoss K10Polyurethane mould and casting substance
Description
K10 is a modified, two component, self levelling casting material with little
shrinkage and good dimensional stability. It is resistant to water, diluted
acids and bases. K10 is cured with K10 B component.
For industrial use only.
Area of application
Moulds and cores that are extremely resistant to bases:
- Patterns for exposed concrete parts
- Elastic moulds for concrete sections
Characteristics
Amount used: 1.1 kg/l
Potlife: ca. 25 minutes
Mixing ratio A:B = 100:10 parts by weight
Colour: yellow
>
>
>
Art. No. Specification
126.606 5,0 kg incl. hardener
POLYURETHANE:
4343
Flexovoss K 14Polyurethane mould and casting
compound Description
K14 is a solvent free, two component mould and casting compound based
on polyurethane which has a short potlife, a short mould release time and a
reduced curing period. K14 contains light weight filling materials. Therefore
the handling characteristics of the hardened material are similar to hard-
wood. The product is used with the B component Type II.
Area of application
- Production of medium sized moulds, suitable for serial production
- Casting of light weight parts
Characteristics
Potlife: ca. 8 minutes at 20°C
Specific gravity: A-comp. 0.8 kg/l; B-comp. 1.22 kg/l
Mixing ratio A:B = 100:50 parts by weight
Cures with: B component Type II
Colour: yellowish
>
>
>
Art. No. Specification
142.366 5,0 kg
143.498 15,0 kg
Elastocoat C 6698/50
Description
C 6698/50 is a two component mould and casting polyurethane resin for
hand and automatic applications. The product does not contain plasticizers
and solvents. The hardened material is very elastic (300% elongation at
break). It is cured with C 6698 B-component and is resistant to water, diluted
acids and bases.
Area of application
Elastic patterns and moulds for:
- Exposed concrete cladding
- Elastic concrete mould parts
- Mould parts
Characteristics
Amount used: 1.0 kg/l
Potlife: ca. 15 minutes
Mixing ratio A:B = 100:20 parts by weight
Cures with: Elastocoat C 6698 B-component
Colour: ivory
>
>
>
Art. No. Specification
126.507 5,0 kg
126.508 30,0 kg
126.417 200,0 kg
POLYURETHANE:
44
Elastocoat C 6698/70
Description
C 6698/70 is a two component mould and casting polyurethane resin for
hand and automatic applications. The product does not contain plasticizer
and solvent. The hardened material is very elastic (200% elongation at
break). Compared to C 6698/50 it is slightly harder and has a Shore-A hard-
ness of 70. It is cured with C 6698 B-component and is resistant to water,
diluted acids and bases.
Area of application
Elastic patterns and moulds for:
- Exposed concrete cladding
- Elastic moulds for concrete sections
- Mould parts
Characteristics
Amount used: 1.0 kg/l
Potlife: ca. 15 minutes
Mixing ratio A:B = 100:26 parts by weight
Cures with: Elastocoat C 6698 B-component
Colour: ivory
>
>
>
Art. No. Specification
126.425 5,0 kg
126.426 30,0 kg
126.419 200,0 kg
Elastocoat C 6698B-component
Description
C 6698 B-component is a prepolymer based on diphenylmethane-diiso-
cyanate (MDI) and is used to cure the two component mould and casting
polyurethane resins C 6698/50 and C 6698/70.
For optimum results and to prevent free poly parts in the cured product, the
mixing ratio must be followed exactly.
>
Art. No. Specification
126.504 1,0 kg
126.505 5,0 kg
126.506 30,0 kg
Elastocoat C 6770/1
Description
C 6770/1 is a two component polyurethane system. It is used for coatings
and hard components or rigid moulds, for producing polyurethane or epoxy
castings. Due to its long working time and slow cure speed it is suitable for
processing by hand and cures, even in thick layers, with little heat and low
shrinkage. It is easy to use as it has a low viscosity. C 6770/1 cures at room
temperature with the B component Type II.
Characteristics
Amount used: 1.2 kg/l
Potlife: ca. 30 minutes
Mixing ratio: 100:90 parts by weight
Colour: yellow
>
>
Art. No. Specification
141.385 5,0 kg
141.386 30,0 kg
141.389 200,0 kg
POLYURETHANE:
4545
Elastocoat C 6781
Description
C 6781 is a two component casting system based on polyurethane that con-
tains filling materials. The product does not contain solvents or plasticizers.
When cured it is permanently elastic (elongation at break ca. 30 %) and is re-
sistant to diluted acids, bases and water. C 6781 cures at room temperature
with the B component Type II.
Area of application
Tough, elastic mouldings:
- Electronic encapsulation
- Small parts and signalling devices for switches and tracks in the railway
industry
Characteristics
Amount used: 1.9 kg/l
Potlife: ca. 4-7 minutes
Mixing ratio: 100:14 parts by weight
Colour: black
>
>
>
Art. No. Specification
126.746 5,0 kg
126.747 30,0 kg
126.397 200,0 kg
Elastocoat C 6782
Description
C 6782 is a two component, polyurethane based, solvent free casting
system that contains filling materials. It has a medium viscosity, a very short
potlife and is easy to use. It cures fast and can often be demoulded within
an hour. This makes C 6782 suitable for mass production. When cured, it
has a Shore D hardness of 70, is resistant to dilute acids, bases and water. C
6782 cures at room temperature with the B component Type II.
Area of application
- Hard casting material for encapsulation of electronic components
- Production of tough and hard components
Characteristics
Amount used: 1.5 kg/l
Potlife: ca 4-7 minutes
Mixing ratio: 100:48 parts by weight
Colour: beige brown
>
>
>
Art. No. Specification
126.744 5,0 kg
126.745 30,0 kg
126.390 200,0 kg
B Component Type IIPolyurethane B component
Description
B component Type II contains diphenylmethane-4.4’-diisocyanate (MDI)
and is used to cure 2 component polyurethane foams and systems. It is
important to work according to the mixing ratio given on the matching A
component to obtain the product properties and to prevent free isocyanate
or polyol particles in the cured product.
Area of application
To harden 2 comp. polyurethane foams:
- Unizell HR-AT / HR77-AT / H 40 B2
- Structural Foam H50-AT / H75-AT
- Structural Foam H200-AT / H400-AT
2 comp. polyurethane systems:
- Elastocoat C6770/1
- Elastocoat C6781
- Elastocoat C6782
- Flexovoss K14
Characteristics
Colour: brown
>
>
>
Art. No. Specification
126.309 1,0 kg
126.310 5,0 kg
126.311 10,0 kg
126.313 200,0 kg
POLYURETHANE:
46
Elastocoat C 6905
Description
C 6905 is a two component casting system based on polyurethane. It
contains no fillers, solvents or plasticizers. Permanently elastic parts (elon-
gation at break ca. 100 %) with a medium Shore A hardness of 55, can be
used even at low temperatures down to -40°C. It can be used to fill narrow
cavities because of its low viscosity (ca. 700 mPa.s). When cured C 6905
is resistant to diluted acids, bases and water. It is cured with the C 6905 B
component at room temperature.
Area of application
Elastic bonding of:
- Polyurethane foam
- A range of plastics (not PE or similar)
- Wood, metal (with G4 primer)
Flexible mould for:
- Polyurethane and epoxy
- The ceramic industry
Production of elastic components
Characteristics
Amount used: 1.1 kg/l
Potlife: ca. 4-7 minutes
Mixing ratio: 100:32 parts by weight
Colour: beige
>
>
>
Art. No. Specification
126.743 A-component / 5,0 kg
126.742 A-component / 30,0 kg
126.386 A-component / 200,0 kg
126.592 B-component / 1,6 kg
126.593 B-component / 9,6 kg
126.387 B-component / 200,0 kg
G4Bonding primer and sealer
Description
G4 is a 1 component polyurethane that cross links chemically after the
solvent has evaporated. The product has good abrasion resistance, high
chemical resistance which includes many waste products, is a tough binding
material and primer coat.
It bonds exceptionally well and has good scratch resistance. It improves
the adhesive strength of GRP coatings. G4 yellows under UV light. With dry
quartz sand or sawdust, G4 can be used as a binding material for repairs.
Area of application
-Adhesive primer for GRP or PUR on: wood, concrete, stone, steel, glass
(restricted)
- Sealant or primer sealer for: wood, concrete, cement, plaster, clay
- Binding agent for: thin layers of resin mortar and wood dust
Characteristics
Amount used: at least 200 ml/m²
Colour: transparent brown
Processing equipment
G4 is applied with a brush, wool roller or spray gun (using fresh air respira-
tory protection). For spray application and to improve penetration into the
substrate, G4 can be used with Polyurethane Thinners.
>
>
>
>
Art. No. Specification
126.406 1,0 l
126.407 5,0 l
126.408 10,0 l
126.409 30,0 l
126.410 200,0 l
SOLID SYSTEMS - COATING SYSTEMS
POLYURETHANE:
4747
G8 SuperClear coating
Description
G8 Super is a good weathering one component, moisture cured polyuretha-
ne clear coating that does not yellow. It has very good resistance to many
chemicals.
Area of application
Abrasion and UV resistant clear coating for: wood, concrete, metal, epoxy
and polyester laminates
Characteristics
Amount per coat: 200-300 ml/m² - depending on porosity
Colour: clear
Processing equipment
G8 Super is applied with a brush, wool roller or spray gun (with fresh air
breathing protection). Polyurethane thinners can be used to improve the flow
and penetration of G8 Super.
>
>
>
>
Art. No. Specification
126.421 1,0 l
126.422 5,0 l
126.423 10,0 l
126.424 200,0 l
Estovoss Standard
Description
Estovoss Standard ia a one component polyurethane that has good ab-
rasion and very good chemical resistance (also when used for agricultural
purposes). It turns slightly yellow when exposed to UV light. The material is
resistant to diluted acids, bases, water, grease and oil at room temperature.
The solvents evaporate and Estovoss is moisture cured.
After priming with G4 and an interval of 2 to 4 hours, a thin layer of Estovoss
Standard is applied twice with a brush or wool roller.
Area of application
A coat that bonds well, is tough, has good chemical resistance, for indoor
concrete and cement floors:
- Garages
- Cellars
- Storage and manufacturing halls
- Stables
Characteristics
Amount per coat: 300-350 ml/m² (2 coatings)
Colour: grey
>
>
>
Art. No. Specification
126.375 1,0 l
126.376 5,0 l
126.377 10,0 l
126.378 30,0 kg
POLYURETHANE:
48
Estovoss Super
Description
Estovoss Super is a one component polyurethane sealant which has good
abrasion, chemical and UV resistance (also when used for agricultural
purposes). It is resistant to diluted acids, bases, grease, oils and water.
When the solvents have evaporated it cures with moisture. After priming with
G4 and an interval of 2 to 4 hours, a thin layer of Estovoss Super is applied
twice with a brush or wool roller.
Area of application
A coating that bonds well, has a good chemical, UV and abrasive resistance,
for indoor and outdoor use:
- Garages, cellars, hobby rooms
- Storage and manufacturing halls
- Transportation silos
- Feeding troughs
Characteristics
Amount used: 300-350 ml/m² (2 coatings)
Colour: grey, pebble grey (green and sand yellow on request)
>
>
>
Art. No. Specification
126.367 grey / 1,0 l
126.368 grey / 5,0 l
126.369 grey / 10,0 l
126.370 grey / 30,0 kg
126.371 green / 5,0 l
126.468 pebble grey / 5,0 l
126.469 pebble grey / 30,0 kg
126.513 sand yellow / 5,0 l
126.514 sand yellow / 30,0 kg
Polyurethane ThinnerThinner and cleaning agent
Description
Polyurethane Thinner is used for G4 and G8 Super. It improves the flow and
penetration of G4/G8 Super coatings. Polyurethane Thinners is also used as
a cleaning agent for tools used to apply these materials.
Area of application
Thinner or equipment cleaner for: G4 or G8 Super
Characteristics
Amount to add:
- G4 up to 200 %
- G8 Super up to 50 %
- Estovoss Standard and Super up to 10 %
Colour: clear
>
>
>
Art. No. Specification
126.380 0,5 l
126.381 1,0 l
126.382 5,0 l
126.384 10,0 l
126.383 200,0 l
ADDITIVES PU
POLYURETHANE:
4949
PUR Accelerator
Description
PUR-Accelerator is used to increase the rate of reaction of several Flexovoss
products. It is added to the A and B component mixture shortly before it is
mixed.
For industrial use only.
Area of application
Reduces the potlife, the mould release time and the curing period:
- Flexovoss K6S & K6T
- Flexovoss K6H
- Flexovoss K7
- Flexovoss K9N
- Flexovoss K10
- Flexovoss K14
- and Elastocoat products
Characteristics
Amount to add: 0.1-0.5 % (0.15 % halves the potlife)
Colour: clear
>
>
>
Art. No. Specification
126.594 1,0 l
POLYURETHANE:
EPOXY
Mechanical and Electrical Properties
EP resins provide a high adhesive strength to the reinforcement fibres and a minimal shrinkage.
Reinforced moulding materials have good residual strength even when subject to oscillatory stress.
The mechanical properties strongly depend upon the fibre content, the fibre direction and the type of
fibre. Depending on their structure the materials range from stiff to elastic, very tough, hard, abrasion
resistant, dimensionally and heat stable. Very good insulating properties.
Epoxy resins are available as casting, coating and laminating resins, moulding material or as pre-
pregs (woven fibres pre-impregnated with resin). The resins are used for the following purposes:
Moulded components with E-glass, R-glass, aramide, carbon, and boron fibres; coatings with and
without glass fibre reinforcements for protection against corrosion; moulding material with glass fibre
reinforcements and metal inlays; polymer concrete for components that have a chemical resistance;
polymer cement based floors as a wear resistant surface coat; casting, saturating and embedding
resins for the electronic field; lacquer resins (thermoplasts and duroplasts); bonding resins.
Chemical Resistance
Epoxies generally have a better resistance to alkaline solutions than polyester resins. They are also,
depending on type, resistant to a range of acids and chemicals such as styrene, xylene, gasoline,
white spirit, petroleum, diesel and fuel oil.
Processing
EP resins can be processed by cold curing or hot curing. When cured with heat they clearly develop
better mechanical properties. Cold curing occurs with the casting of construction parts, the hand
lay-up and vacuum processes. Pre-impregnated woven fibres (40 to 60% glass content) are pro-
cessed to high strength moulded components on a press machine under vacuum or in autoclaves.
Hollow parts are produced in the filament winding process with pre-impregnated rovings of glass,
aramide or carbon fibres. Glass fibre EP parts can be shaped, bonded and will take screws. In a
cured state the material is physically harmless in practical terms.
Application
• Casting of electrical and electronic components:
Parts for electric motors; insulators; high voltage bearings. Base panels for electronic switches.
• Vehicle construction:
Gliders and power gliders; building components and panelling for large aeroplanes (sandwich
construction). Structural parts for UL (ultra light) aeroplanes; covers subject to heat exposure;
bonnets and spoilers on sports cars; panels for racing cars; racing yachts and boats, surfboards,
high performance masts, surf masts, wishbooms, bonding wood on modern boats, racing bikes,
tennis racquets.
• Tool construction:
Casting models, master forms, moulds, deep drawn tools, foam moulds, tools for injection moul-
ding.
• Building industry:
Reconstruction and bonding of concrete parts, surface protection, cement based composition
floors.
54
Epoxy BKEpoxy laminating, casting and binding resin
Description
BK is a low viscosity (ca. 1000 mPa.s), solvent free epoxy resin that can be
processed at room temperature and hardens tack free. It can be used as
coating, casting and laminating resin and as a binding agent. The resin is
cured with BK hardener (amine) and can be used with glass, carbon or kevlar
fibre in the hand lay-up process.
Area of application
An all purpose epoxy resin for laminating, casting and binding:
- Moisture resistant coating for gutters, pipes and tanks made of concrete
and other materials
- Encapsulation of electronic wiring
- Laminating resin for model construction, for panels and bonnets
in the vehicle and apparatus industry
- For wood repairs as a binder for fillers or adhesives
- Binder for sand mixtures used to repair floors
- Binder for light weight filling materials that are used as base and fine filler
Characteristics
Amount used: 3x mat, 1x woven fabric weight; 1.1 kg/l
Potlife: ca. 30 minutes
Mixing ratio A:B = 100:60 parts by weight
Cures with: BK hardener
Colour: transparent
>
>
>
Art. No. Specification
125.149 0,5 kg incl. hardener
125.152 1,0 kg incl. hardener
124.904 5,0 kg incl. hardener
125.123 30,0 kg incl. hardener
LAMINATING & CASTING
Epoxy BNEpoxy coating and casting compound
Description
BN is a cold curing, slightly filled epoxy resin that can be processed at room
temperature and hardens to a tack free surface. It is of medium viscosity
(2700 mPa.s) and contains no solvents. BN is suitable as a coating and
casting compound for parts subject to higher stress.
Area of application
Coating and casting compound:
- Water proof coating on porous and flat surfaces e.g. gutters, pipes,
concrete, steel tanks etc.
- Casting compound for cracks or defects in concrete and other materials
- Encapsulation of electronic wiring
Characteristics
Amount used: 1.7 kg/l
Potlife: ca. 40 minutes
Mixing ratio A:B = 100:25 parts by weight
Cures with: BN hardener
Colour: light grey
>
>
>
Art. No. Specification
125.156 0,5 kg incl. hardener
125.159 1,0 kg incl. hardener
124.908 5,0 kg incl. hardener
124.864 30,0 kg incl. hardener
EPOXY:
5555
Epoxy LN-1Epoxy laminating, casting and binding resin
Description
LN-1 is a cold curing, solvent free, low viscosity (1200 mPa.s) laminating
resin. The resin processes very good mechanical strength, and has a high
heat and chemical resistance. It is cured with the LN-1 hardener (amine) and
does not harden tack free. LN-1 has good saturating and wetting qualities
and can be used with glass, carbon and kevlar fibres. LN-1 is also applied as
a saturating and bonding resin for wood.
Area of application
Glass fibre reinforced parts and laminates that are subject to higher mecha-
nical, heat and chemical conditions. Bonding and saturating resins for wood.
Characteristics
Potlife: ca. 30 minutes
Mixing ratio A:B = 100:25 parts by weight
Cures with: LN-1 hardener
Colour: transparent
>
>
>
Art. No. Specification
132.646 0,5 kg incl. hardener
132.648 1,0 kg incl. hardener
132.650 5,0 kg incl. hardener
132.652 30,0 kg incl. hardener
Epolit CK Epoxy laminating, casting and binding resin
Description
Epolit CK is a solvent free, low viscosity bisphenol A resin with reactive
diluent, which is especially used as a chemical resistance coating and as a
casting compound.
Area of application
Epolit CK is used as binder for sand mixtures and in connection with light
filler material for normal requirements. The cured surface is highly UV light
resistant.
Epolit CK can be used with glass, carbon or kevlar fibre in the hand lay-up
process. It is also applied as a casting, saturating and bonding resin.
>
>
Art. No. Specification
143.785 Epolit CK / 200 kg
143.974 Epolit CK / 1000 kg
143.984 Epocur CK MI / 25 kg
143.983 Epocur CK MI / 200 kg
EPOXY:
56
Epolit UNEpoxy laminating, casting and binding resin
Description
Epolit UN is a universal, low viscosity, solvent free bisphenol A/F resin with
reactive diluent and high crystallization stability. It can be used as a lamina-
ting, casting, saturating and bonding resin.
Area of application
The laminating system with the hardener Epocur UN SC for all-purpose
applications is used for manufacturing composites for boats, pipes and
containers and for repairing GRP parts. The laminate strengths achieve
their final properties by storing at room temperature after 4-6 days. A higher
mechanical resistance can be achieved after post curing the laminates.
The laminating system with the hardener Epocur UN MI has an extended
potlife (gel time > 8 h) and due to its low viscosity it is recommended for
injection methods e.g. for large laminates and in parts for the construction
industry. The post curing of the laminates is recommended.
The system with the hardener Epocur UN LA has a very long potlife and is
used especially in areas with warmer climate and for sewage renovation.
Larger batch sizes can be processed.
>
>
Art. No. Specification
143.783 Epolit UN / 200 kg
143.976 Epolit UN / 1000 kg
143.986 Epocur UN LA / 25 kg
143.985 Epocur UN LA / 200 kg
143.988 Epocur UN MI / 25 kg
143.987 Epocur UN MI / 200 kg
143.992 Epocur UN SC / 25 kg
143.991 Epocur UN SC / 200 kg
Epolit OVEpoxy laminating, casting and binding resin
Description
Epolit OV is a solvent free bisphenol A resin with reactive diluent and redu-
ced crystallization tendency. The hardeners Epocur OV SC and Epocur OV
LA are liquid at room temperature, uncoloured to light yellow polyamines.
The hardener Epocur OV LA is suitable for formulation of laminating systems
with a low exothermic reaction and a long potlife.
The fast curing hardener Epocur OV SC can be mixed with the slow curing
hardener Epocur OV LA in any desired ratio. This allows adjusting the potlife,
the curing process and the viscosity of the material, without changing the
mixing ratio of resin and hardener. This system is approved according to
Germanischer Lloyd.
Area of application
Epolit OV with the hardeners Epocur OV SC and Epocur OV LA are lamina-
ting systems which are preferably used for manufacturing rotor blades for
wind power stations, producing high strength reinforced mould components
and composites in the boat building, pipe and container building industry.
>
>
Art. No. Specification
143.784 Epolit OV / 200 kg
143.975 Epolit OV / 1000 kg
143.978 Epocur OV LA / 25 kg
143.977 Epocur OV LA / 200 kg
143.980 Epocur OV SC / 25 kg
143.979 Epocur OV SC / 200 kg
EPOXY:
5757
GlosscoatEpoxy coating resin
Description
Glosscoat is a cold curing, solvent free, transparent, easy flowing resin.
It is cured with Glosscoat hardener. Decorative pictures, collages and
coatings with a smooth, high gloss surface can be made. The colours can be
separated by wire inlays (similar to lead borders) or allowed to flow into one
another. A coating of Glosscoat enhances the effect of wood grain.
Area of application
- Decorative coatings, collages on wood and other materials
- High gloss, transparent coats on various materials e.g. wood, plastics,
metals etc.
Characteristics
Amount used: 200 g/m²
Potlife: ca. 40 minutes
Mixing ratio: 100:40 parts by weight
Colour: transparent yellow
>
>
>
Art. No. Specification
124.915 1,0 kg incl. hardener
124.918 14,0 kg incl. hardener
COATINGS
Speedcoat SCEpoxy coat
Description
Speedcoat SC is a cold curing, thixotropic, solvent free, high gloss gelcoat
and topcoat used to level surfaces of finely woven mat (viscosity 4700 mPa.
s). It is cured with Speedcoat hardener and applied by means of the hand
lay-up process. SC can be coloured with EP pigment pastes. If necessary, a
light stable PUR lacquer can be used as the last layer.
Area of application
High gloss, long wearing gelcoat or topcoat for:
- Custom made boards
- Negative glass fibre epoxy resin moulds
- Final coat for wooden boats built by means of the epoxy wood bonding
method that need to be coated with a lacquer
- Steel moulds for artificial stone production
Characteristics
Amount used: 200 g/m²
Potlife: ca. 25 minutes
Mixing ratio: 100:40
Colour: transparent
>
>
>
Art. No. Specification
125.941 1,0 kg incl. hardener
125.945 5,0 kg incl. hardener
EPOXY:
SILICONE
Properties
The one component silicone cures with air moisture to a permanent elastic sealant. Two component
silicone rubbers are used as moulding and coating compounds. The material has a low shrinkage,
medium mechanical strength, high heat resistance (over 300°C for a short period without great
change in the mechanical properties), long processing and curing times, is physically harmless in
practical terms (excluding some hardeners) and has good electrical insulation ability. Very accurate
and flexible moulds are produced with 2 comp. silicone. The material has a high elasticity and one
piece moulds can often be made where two piece moulds would usually be necessary. Objects with
undercuts can also be reproduced. Silicone is self releasing from many materials.
Solutions prevent water penetration, but still allow vapour transmission.
Silicone rubber has high elasticity which makes it a useful material for many applications. One com-
ponent silicones adhere well to many substrates, two component silicones have good self releasing
properties from many materials.
Processing
Silicone rubbers are processed by casting, brushing or spraying. The solutions are applied by spray,
roller or brush.
Application
Mould material: elastic moulds with a high tear resistance for reproducing components. For machine
construction, automobile engineering, manufacture of decorative parts, prototypes and sculptures.
Precision mechanics: a sealant with high heat and water resistance.
Electronic field: casting compound for electronic encapsulation, laminated sheets for electronic
parts.
Car body production, sanitary areas, joints in construction: permanently elastic sealant that has a
high heat resistance and inhibits fungal growth.
Silicones are resistant to: diluted mineral acids and bases, glycol, sea water, methanol. They are not
resistant to: concentrated acids and bases, aromatic hydrocarbons and most solvents.
62
Sicovoss NLSilicone mould and casting material
Description
NL is an elastic mould and casting material that is self releasing from many
materials. It cures at room temperature after adding the NL curing agent.
With a low shrinkage it is used for reproducing complicated surfaces with
slight undercuts. After several uses a release agent is advised. NL may be
used to cast: polyester resin, casting Wood, polyurethane, plaster and wax.
Area of application
Moulds for parts with a complicated surface structure and slight undercuts
and as a casting compound:
- Furniture decorations
- Reliefs (coins, coats of arms)
- Decorative pieces
- Candles
- Jewellery figures
- Model toys
- Small production runs
Characteristics
Amount used: 1.1 kg/l
Potlife: 90-120 min.
Cures with: 5 % NL curing agent
Colour: blue
>
>
>
Art. No. Specification
125.783 0,5 kg incl. hardener
125.786 1,0 kg incl. hardener
125.789 5,0 kg incl. hardener
125.795 30,0 kg incl. hardener
Sicovoss RFHigh strength silicone mould material
Description
RF is a tear resistant, highly elastic mould and casting material (600 % elon-
gation at break) and is self releasing from many materials. It cures at room
temperature after adding the RF curing agent. This low shrinkage silicone
rubber (0.2-0.5 % linear shrinkage) is used for moulding deeply undercut
parts. RF moulds can be subjected to high stress, they have excellent tear
resistance and stability. As the material has a high elasticity, one part moulds
are often made instead of two part moulds. If the mould is repeatedly used
a release agent is recommended. RF can be thickened with Silastic Thixo
Additive so that it does not drain on vertical surfaces or ceilings.
RF can be used to cast: polyurethane casting materials, polyurethane foams,
polyester resin, casting wood, concrete, wax and plaster.
Area of application
Moulds and parts with very complex shapes and deep undercuts:
- Figures (seamless one part moulds)
- Decorative and construction elements
- Candles
- Garden ornaments
- Model toys
Characteristics
Amount used: 1.2 kg/l
Potlife: 90-120 min.
Cures with: 5 % RF curing agent
Colour: white
>
>
>
Art. No. Specification
125.798 0,5 kg incl. hardener
125.801 1,0 kg incl. hardener
125.804 5,0 kg incl. hardener
125.810 30,0 kg incl. hardener
SILICONE:
6363
Silastic ® 3133 All purpose silicone mould material
Description
Silastic® 3133 is an easy to use silicone mould making rubber. It is de-airing
and cures at room temperature after adding Silastic® 81-NW curing agent
and has a low shrinkage (0.2-0.4 % linear shrinkage). It is self releasing from
many materials. It has a low hardness and high elasticity which allows easy
removal of parts even those with undercuts. If the mould is used repeatedly
a release agent is advised. Moulds made from Silastic® 3133 can be used
to cast polyester resins, polyurethane casting materials and foams, plaster
and wax.
Area of application
Moulds for the reproduction of parts with complex shapes and undercuts:
- Reliefs
- Figures
- Model toys
- Decorative parts
Characteristics
Amount used: 1.2 kg/l
Potlife: 90-120 min.
Cures with: 5 % curing agent Silastic® 81-NW
Colour: pale blue
>
>
>
Art. No. Specification
125.914 Silastic 3133 / 5,0 kg
143.036 Silastic 81-NW Curing Agent / 0,25 kg
SILICONE:
64
Silastic ® 3481High strength silicone mould material
Description
Silastic® 3481 is a highly elastic silicone mould making rubber (600 %
elongation at break) with high tear strength for industrial purposes. The
casting material has a low shrinkage (0.2-0.4 linear shrinkage), is self
releasing from many materials and cures at room temperature. The moulds
provide excellent reproduction of finely detailed parts that have a complica-
ted surface pattern and deep undercuts. Silastic® 3481 has very good tear
resistance (and notch resistance). As the material has a high elongation, one
piece moulds can often be made where two piece moulds would usually be
necessary. It can be thickened by adding Silastic® Thixo Additive so that
it does not drain on vertical surfaces. If the mould is used repeatedly use a
release agent. Moulds made from Silastic® 3481 can be used to cast poly-
ester resin, polyurethane casting materials and foams, casting wood, epoxy
resins, plaster, wax and concrete.
Several curing agents can be used:
- Silastic® 81 NW – standard curing agent
- Silastic® 81-R NW – especially used for casting polyester resins
- Silastic® 81-F NW – fast hardener, potlife 30-45 min., cure time 5 hrs
- Silastic® 81-VF NW – very fast hardener, potlife 8-10 min., cure time 90 min.
Area of application
Elastic, high tear resistant moulds for parts that have a difficult shape and
deep undercuts. Suitable for mass production:
- Furniture decorations
- Figures (seamless moulds)
- Statues and pillars
- Candles
- Model toys
Characteristics
Amount used: 1.2 kg/l
Potlife: 90-120 min. with Silastic® 81
Curing agents: 5 % Silastic® 81 NW, 81-R NW, 81-F NW, 81-VF NW
Colour: white
>
>
>
Art. No. Specification
125.964 Silastic 3481 / 5,0 kg
125.965 Silastic 3481 / 20,0 kg
143.036 Silastic 81-NW Curing Agent / 0,25 kg
143.037 Silastic 81 NW Curing Agent / 1,0 kg
143.038 Silastic 81 NW Curing Agent / 10,0 kg
143.042 Silastic 81-R NW Curing Agent / 0,25 kg
143.043 Silastic 81-R NW Curing Agent / 1,0 kg
143.044 Silastic 81-R NW Curing Agent / 10,0 kg
143.039 Silastic 81-F NW Curing Agent / 0,25 kg
143.040 Silastic 81-F NW Curing Agent / 1,0 kg
143.041 Silastic 81-F NW Curing Agent / 10,0 kg
SILICONE:
6565
Silastic ® 3483High strength silicone mould material
Description
Silastic® 3483 is a high strength silicone rubber. It has a low shrinkage and
is self releasing from many materials. The low hardness (Shore A 13) and the
high tear strength (elongation at break 600 %) allow easy release, even of
complex parts with deep undercuts. With Silastic® 3483 a one piece mould
can often be made where two piece moulds would usually be necessary.
It can be thickened with Silastic® Thixo Additive to make it brushable, so
that it does not drain on vertical surfaces. If the mould is used repeatedly a
release agent is recommended. Moulds made from Silastic® 3483 can be
used to cast: polyester resins, polyurethane casting materials and foams,
casting wood, epoxy resins, plaster and wax.
Area of application
High tear strength and elastic moulds for parts with a complicated surface
structure and deep undercuts. Suitable for mass production:
- Furniture decorations
- Figures (seamless moulds)
- Statues and pillars
- Candles
- Model toys
Characteristics
Amount used: 1.2 kg/l
Potlife: 90-120 min.
Curing agent: 5 % Silastic® 83 NW
Colour: white
>
>
>
Art. No. Specification
125.709 Silastic 3483 / 5,0 kg
125.715 Silastic 3483 / 20,0 kg
126.001 Silastic 3483 / 200,0 kg
143.045 Silastic 83 NW Curing Agent / 0,25 kg
143.046 Silastic 83 NW Curing Agent / 1,0 kg
143.047 Silastic 83 NW Curing Agent / 10,0 kg
Silastic ® 3496 / 3497 / 3498High strength silicone mould material
Description
The materials are high strengh, elastic silicones which are formulated to
have an improved mould life for polyester resins. They have an outstanding
release and high tear resistance for accurate moulds of parts with complex
shapes and deep undercuts. In combination with the curing agents these
silicone rubbers achieve different viscosities, processing times as well as
degrees of hardness.
Characteristics
Amount used: 1.2 kg/l
Curing agent: 5 %
Colour: white
>
>
Art. No. Specification
136.833 Silastic 3496 / 20,0 kg
136.834 Silastic 3497 / 20,0 kg
136.835 Silastic 3498 / 20,0 kg
143.036 Silastic 81-NW Curing Agent / 0,25 kg
143.037 Silastic 81 NW Curing Agent / 1,0 kg
143.038 Silastic 81 NW Curing Agent / 10,0 kg
143.042 Silastic 81-R NW Curing Agent / 0,25 kg
143.043 Silastic 81-R NW Curing Agent / 1,0 kg
143.044 Silastic 81-R NW Curing Agent / 10,0 kg
143.039 Silastic 81-F NW Curing Agent / 0,25 kg
143.040 Silastic 81-F NW Curing Agent / 1,0 kg
143.041 Silastic 81-F NW Curing Agent / 10,0 kg
SILICONE:
66
Silastic ® M
Description
Silastic ® M is suited for the reproduction of prototyping, architectural
and furniture components, especially for use with polyurethanes and other
casting plastics. It has a high degree of hardness and a high inhibition resi-
stance. It can be used for high temperature casting applications.
Characteristics
Amount used: 1.29 kg/l
Potlife: 60 minutes
Curing agent: 10 % hardener
Colour: blue
>
>
Art. No. Specification
138.802 Silastic M / 4,0 kg
138.803 Silastic M Curing Agent / 0,4 kg
Silastic ® P-1
Description
Silastic ® P-1 is a high tear resistant and low viscosity silicone rubber
(13500 mPa.s). It has a very high elongation at break (850%) and cures at
room temperature with 10 % curing agent, practically shrinkage free. If the
mould is used repeatedly a release agent is recommended.
Characteristics
Amount used: 1.12 kg/l
Potlife: 30-90 minutes
Curing agent: 10 % hardener
Colour: white
>
>
Art. No. Specification
132.404 22,0 kg incl. hardener
Silastic ® SSilicone Mould Material
Description
Silastic ® S is a high strength, very low viscosity silicone rubber (10000
mPa.s). It is very soft (25 Shore A) and has a very high elongation at break
(750 %). It cures at room temperature with 10 % curing agent S, practically
shrinkage free. Moulds made from Silastic ® S have a long mould life even
at temperatures of up to 200°C. If the mould has a high repeat usage a
release agent is recommended. Silastic ® S can be used to cast concrete,
many casting resins, very suitable for the ceramic industry.
Area of application
Accurate moulds for industrial application and moulding of figures:
- Moulding concrete
- Prototypes
- Complicated technical models
- Ceramic industry
Characteristics
Amount used: 1.12 kg/l
Potlife: 30-90 min.
Curing agent: 10 % hardener S
Colour: green
>
>
>
Art. No. Specification
125.471 1,1 kg incl. hardener
125.472 5,5 kg incl. hardener
125.524 22,0 kg incl. hardener
SILICONE:
6767
Silastic ® S-2
Description
Silastic ® S-2 silicone rubber is suited for detailed reproduction of surfaces
and objects, particularly suited for reproductions in plaster, polyurethane and
concrete. It hardens rapidly at room temperature, even when applied in thick
coats.
Characteristics
Amount used: 1.13 kg/l
Potlife: 60 minutes
Curing agent: 10 % hardener
Colour: white
>
>
Art. No. Specification
136.999 22,0 kg incl. hardener
Silastic ® T-2
Description
Silastic ® T-2 is a translucent silicone mould making rubber with a low
viscosity and a high degree of hardness (shore A 40). It is used for making
accurate moulds for prototype design and small production runs. T-2 is also
suitable for artistic and renovation applications.
T-2 cures at room temperature with 10% curing agent, practically shrinkage
free. Although the silicone has good flow properties, entrapped air can affect
the translucency of the cured silicone. Entrapped air should be removed
in a vacuum chamber. The translucency allows cutting a one piece mould
without damaging the original part. T-2 is self releasing from many materials.
If the mould is used repeatedly a release agent is recommended.
Characteristics
Amount used: 1.12 kg/l
Potlife: 90-120 minutes
Curing agent: 10 % hardener
Colour: translucent
>
>
Art. No. Specification
126.276 5,5 kg incl. hardener
126.235 22,0 kg incl. hardener
SILICONE:
70
Formula Five Cleaner
Description
Formula Five ® Cleaner is a polishing agent, which extends the service life
of the mould. It removes fine scratches and provides a high gloss surface for
the application of the release wax. It is recommended to use Formula Five ®
Cleaner in combination with Formula Five ® Wax.
Area of application
Cleans and polishes:
- Moulds treated with Formula Five ® Wax
- Moulds coated with other release waxes
Characteristics
Amount used: ca. 15 g/m²
Colour: clear
>
>
>
Art. No. Specification
125.614 950 ml
CLEANING
TR-210Self Stripping
Description
A liquid release wax to reduce and minimize styrene and release wax build-
up or accumulation.
Area of application
- Easy to apply, cleans and releases in one easy step
- Fast drying
- Restores gloss appearance
- Ideal for detailed or non-skid type moulds
- Improves production cycles and mould maintenance
Characteristics
Amount used: ca. 200 ml/m²
Colour: transparent
>
>
>
Art. No. Specification
125.629 3,785 l
TR-905Solvent Mold Prep Cleaner
Description
TR-905 is a mixture of solvents. It removes wax, oil and other contaminates
from GRP tools and hard mould surfaces.
Area of application
TR-905 is applied with a clean cotton cloth (do not use blended fabrics)
onto the dry mould surface. The surface must stay wet during application to
ensure that the residues of the release agent are thoroughly removed.
>
>
Art. No. Specification
137.637 3,785 l
CLEANING, CARE & RELEASE AGENTS:
7171
M-50Polishing paste
Description
M-50 is a medium fine, strong polishing paste for reinforced polyester and
epoxy resin moulds. After wet sanding, M-50 is applied with a polishing
machine achieving a good first glazed finish.
Area of application
Removes wet sanding marks on GRP mould surfaces
Characteristics
Amount used: depends on condition
Colour: white
>
>
>
Art. No. Specification
126.085 1,0 kg
CARE & POLISHING
M-100Polishing paste
Description
M-100 is a fine, abrasive polishing paste applied by machine on moulds after
using M-50, or separately. Achieves a deep glazed finish.
Area of application
Restores and gives a good gloss finish.
Characteristics
Amount used: depends on condition
Colour: white
>
>
>
Art. No. Specification
125.927 1,0 kg
M-200Polishing liquid
Description
M-200 is a polishing liquid that has a strong abrasive and cleaning action on
polyester and epoxy resin moulds. After wet sanding, M-200 is applied by
hand or machine to achieve the first good glaze.
Area of application
Removes wet sanding marks on GRP mould surfaces
Characteristics
Amount used: depends on condition
Colour: white
>
>
>
Art. No. Specification
126.074 2,5 l
CLEANING, CARE & RELEASE AGENTS:
72
M-300Polishing liquid
Description
M-300 is a polish that has an abrasive and cleaning effect. It is applied
after M-200 or separately in several steps by hand or machine. Provides an
improved glaze.
Area of application
Restores and creates a good gloss on GRP mould surfaces
Characteristics
Amount used: depends on condition
Colour: white
>
>
>
Art. No. Specification
126.079 2,5 l
M-400Polishing emulsion
Description
M-400 is a fine, silicone free polish that provides a high gloss mould surface.
M-400 is applied afer M-100 or M-200, as a final mould preparation. Applied
by hand or polishing machine (max. 2100 R.P.M.).
Area of application
To ensure a high gloss finish on GRP mould surfaces.
Characteristics
Amount used: depends on condition
Colour: white
>
>
>
Art. No. Specification
126.081 2,5 l
TR-301Sealer Glaze
Description
TR-301 is an off white wax based emulsion and gives GRP mould surfaces
an outstanding shine. It cleans, polishes and seals. TR-301 is applied twice
on new moulds. The sealer is applied by hand or machine.
>
Art. No. Specification
125.527 3,785 l
TR-311Super Duty Buffing Compound
Description
TR-311 Super Duty Buffing Compound removes sanding marks and
provides a smooth and scratch free surface. TR-311 has been special deve-
loped for use in the GRP area.
Area of application
TR-311 restores and improves GRP mould surfaces.
Characteristics
Amount used: depends on moulds
>
>
>
Art. No. Specification
137.110 3,785 l
CLEANING, CARE & RELEASE AGENTS:
7373
Buff 880 APolishing pad
Description
Buff 880 A is a long wearing polishing pad with curved edges used for the
first polish. It has a 14 mm-Ø-retainer with a conical strain screw (angle
polisher).
Characteristics
Diameter: 20 cm
Material: 1005 lambswool
Colour: wool white
>
>
Art. No. Specification
126.093 Ø 20 cm
Buff 804 RUPolishing pad
Description
Buff 804 RU is an all purpose polishing pad with curved edges for rough and
fine polishing. The retainer is the same as that of Buff 880 A.
Characteristics
Diameter: 20 cm
Material: cotton / polyester combination
Colour: yellow
>
>
Art. No. Specification
126.092 Ø 20 cm
W2Release Wax
Description
W2 is a solution of hard wax mixed with perchlorethylene and used for
demoulding GRP parts. It is suitable for laminates affected by water and can
be used together with a releasing lacquer.
Area of application
A separate or additional release agent for GRP and metal moulds when
producing:
- GRP parts out of UP and EP resins
Characteristics
Amount used per coat: 50-60 g/m²
Drying time: ca. 10 minutes
Colour: clear
>
>
>
Art. No. Specification
125.742 0,1 l
125.743 0,5 l
125.744 1,0 l
125.745 5,0 l
125.746 10,0 l
RELEASING
CLEANING, CARE & RELEASE AGENTS:
74
Release Spray
Description
Release Spray is an all purpose release agent that contains an alternative
blowing agent and can be applied onto many materials such as GRP, glass,
resopal and silicone rubber moulds. It is sprayed on evenly and thinly from a
distance of 30 cm and is polished with a soft cloth.
Area of application
All purpose release spray for GRP and silicone moulds when using:
- PUR casting compounds
- PUR foams
- Polyester
- Epoxy
Characteristics
Amount used: 25-50 g/m²
Drying time: ca. 15 minutes
Colour: clear
>
>
>
Art. No. Specification
125.459 400 ml
Release Lacquer Green
Description
Release lacquer green is a solution of polyvinyl alcohol in water. The material
is mainly used in combination with (polished) release wax to obtain a better
release.
Release lacquer green is applied thinly and evenly with a sponge and is dry
after 30 minutes. It can be removed with warm water.
Area of application
On non-porous moulds (metal); it is applied as an additional release agent on
other moulds on top of release wax used for GRP moulded parts.
Characteristics
Amount used: ca. 50 g/m²
Drying time: ca. 30 minutes
Colour: green
>
>
>
Art. No. Specification
125.457 0,5 l
125.458 1,0 l
126.197 5,0 kg
126.208 20,0 kg
Release Lacquer Clear
Description
The same as Release lacquer green.
Characteristics
Amount used: ca. 50 g/m²
Drying time: ca. 30 minutes
Colour: clear
>
>
Art. No. Specification
125.456 0,1 l
125.890 0,5 l
125.891 1,0 l
125.892 5,0 kg
126.209 20,0 kg
CLEANING, CARE & RELEASE AGENTS:
7575
M-500Release wax
Description
M-500 is a release wax for continuous production. It cleans excess wax from
the mould surface and reinforces the base wax coat M-700 or M-800 on
worn places as well as improving the surface of the moulded component.
Together with M-700 or M-800 it provides a constant surface quality at low
maintenance costs. Note: M-500 cannot be used separately.
Area of application
Release wax for continuous production with a cleansing effect for reinforced
polyester and epoxy resin moulds.
Characteristics
Amount used: depends on moulds
Colour: yellowish
>
>
>
Art. No. Specification
126.082 2,5 l
M-700Release wax
Description
M-700 is a highly effective, easy to use releasing wax that does not build-up.
It is silicone free and achieves a very good gloss on moulded parts. Applied
as a base wax before the mould is first used.
Area of application
A base wax before the mould is first used:
- New and touched up moulds made from reinforced polyester or epoxy
resin
Characteristics
Amount used: ca. 10 g/m²
Colour: yellowish
>
>
>
Art. No. Specification
126.011 425 g
M-800High temp release wax
Description
M-800 is a heat resistant wax that has a paste consistency formulated for
e.g. pre-heated aluminium, nickel, polyester and epoxy moulds or mouldings
with a high exotherm reaction. Apply M-800 with a cloth and spread in circu-
lar movement. Polish, applying slight pressure.
Area of application
Release agent for GRP parts:
- Polyester moulds
- Epoxy moulds
- Aluminium moulds
- Nickel moulds
Characteristics
Amount used: ca. 15 g/m²
Colour: yellowish
>
>
>
Art. No. Specification
126.141 400 g
CLEANING, CARE & RELEASE AGENTS:
76
Formula Five Wax
Description
Formula Five ® is a concentrated high grade hard wax mixture. This multiple
release agent (several demouldings are possible with one coating of Formula
Five ®) has good demoulding properties and is suited for GRP moulded
components produced in plastic and metal moulds. Formula Five ® is remo-
ved with the Formula Five Cleaner.
Area of application
Multi-purpose release agent for GRP and metal moulds for polyester moul-
ded parts.
Characteristics
Amount used: ca. 2-5 g/m²
Drying time: ca. 15 minutes
Colour: clear
>
>
>
Art. No. Specification
125.613 340 g
TR-102Regular Mold Release
Description
TR-102 can be applied fast, evenly, is quick drying and easy to polish. The
release wax is based on carnauba. It is used on cold curing GRP parts,
applied with a sponge and polished with a soft wool cloth.
Area of application
A release agent used to produce GRP moulded parts in GRP negative
moulds.
Characteristics
Amount used: ca. 15 g/m²
Colour: whitish
>
>
>
Art. No. Specification
125.526 396 g
TR-104High Temp Mold Release
Description
TR-104 is applied the same as TR-102, but for thicker GRP laminates that
have a higher exotherm temperature and on hot curing GRP moulded com-
ponents. It can be applied thinly and provides an above average number of
demouldings per application. The release wax is applied by hand or with a
buffing pad.
Area of application
For the production of GRP moulded parts in:
- Steel moulds
- Aluminium moulds
- Thicker laminates
Characteristics
Amount used: ca. 15 g/m²
Colour: light blue
>
>
>
Art. No. Specification
126.250 396 g
CLEANING, CARE & RELEASE AGENTS:
7777
TR-108Basic Mold Release
Description
TR-108 is a blend of waxes that produce a hard and deeper wax base coat.
It leaves a deep wax base durable finish and is compatible with PVA and
masking requirements. It is excellent for break-in of new moulds.
Area of application
Recommended for all fiberglass tooling, formica, and other hard surface
moulds.
Characteristics
Amount used: ca. 20 g/m²
Colour: beige
>
>
>
Art. No. Specification
125.631 396 g
TR-900Liquid Release
Description
TR-900 is a high temp semi-permanent release coating which dries rapidly
at room temperature. It leaves an ultra thin release film on the mould surface.
TR-900 is an excellent multiple release agent for many polyester mould parts
and other fibre reinforced plastics.
Area of application
An effective multiple release agent for GRP and other polyester mould parts
using the following application methods:
- Open moulding
- Compression
- Injection
- Vacuum bag
- Resin transfer moulding (RTM)
Characteristics
Amount used: depends on moulds
Potlife: ca. 10 minutes
Colour: transparent
>
>
>
Art. No. Specification
139.403 3,785 l
TR-920Liquid Release
Description
TR-920 is a high-temp semi-permanent multiple release agent which dries
rapidly at room temperature. It leaves an ultra thin film on the mould surface.
TR-920 is suitable for polyester, epoxy, polyamide, SMC, BMC and other
glass and carbon fibre reinforced building laminates and moulds.
Area of application
Release agent for use with following application methods:
- Hand lay-up or spray
- Compression
- Injection
- Vacuum
- Resin transfer moulding (RTM)
Characteristics
Amount used: ca. 15 g/m²
Potlife: ca. 20 minutes at room temperature
Colour: transparent
>
>
>
Art. No. Specification
138.873 3,785 l
CLEANING, CARE & RELEASE AGENTS:
78
TR-910Mould Sealer
Description
TR-910 is an elastic base coat for sealing the mould surface before applying
the TR-900 products. TR-910 hardens with moisture and forms a film.
Area of application
TR-910 is applied to GRP, metal or other compound materials before the
application of the release agents TR-900, 920 and 930.
- Resistant to temperatures up to 480°C
- Protects against styrene attack and maximises the efficiency of the TR-900
permanent release agents
- Seals pores
- Moisture hardening
- Adheres well to the mould surface
- Compatible with most release agents
Characteristics
Amount used: depends on moulds
Potlife: ca. 20-30 minutes
Colour: transparent
>
>
>
Art. No. Specification
139.404 3,785 l
APWRelease agent
Description
APW is a mixture of soft waxes in paste form used to release hard polyure-
thane foams and casting materials from moulds that have complicated and
porous surfaces. It is applied with a sponge or cloth. APW can be used with
AFH-1 as first release agent.
Area of application
For GRP, wood and silicone moulds that have complicated or porous moul-
ding surfaces:
- PUR hard foam
- PUR casting materials
Characteristics
Amount used per coat: ca. 50 g/m²
Drying time: 15-60 minutes
Colour: clear
>
>
>
Art. No. Specification
126.666 0,5 kg
126.667 1,0 kg
126.668 20,0 kg
AFH-1Release agent
Description
AFH-1 is a solution consisting of a hard wax mixture used mainly to release
surfaces when moulding soft and integral foam. It is also used for moulding
with other plastics. AFH-1 is applied with a cloth or sponge. Polish well after
drying. This product is intended for industrial use only.
Area of application
For GRP, aluminium and steel moulds for moulding:
- Soft and integral foam
- Hard and structural foam
- Polyurethane
- Polyester
Characteristics
Amount used per coat: ca. 50 g/m²
Drying time: 15-60 minutes
Colour: clear
>
>
>
Art. No. Specification
126.521 1,0 l
126.522 5,0 l
126.523 30,0 l
CLEANING, CARE & RELEASE AGENTS:
7979
Hostaphan Foil
Description
Hostaphan foil is a re-usable, high strength foil used to obtain tack free
polyester and epoxy resin surfaces. The foil is also used as a release agent
for single curved moulds. The foil cannot be deep drawn.
Area of application
For polyester and epoxy resins:
- Release foil on flat surfaces
- A cover to obtain a tack free reverse side of laminates and gelcoats
Characteristics
Thickness: 0.05 mm
>
>
>
Art. No. Specification
125.571 1 m²
125.572 10 m²
CLEANING, CARE & RELEASE AGENTS:
82
Special Scissors
Description
Special scissors for aramid, carbon, woven glass and glass mat. 8 inch.
>
Art. No. Specification
125.852 8‘‘
MEASURING & MIXING EQUIPMENT
Pipette
Description
Graduated pipette to measure small amounts of hardener or accelerator.
>
Art. No. Specification
125.762 3 ml with 0.5 ml scale
Measuring Bottle
Description
Plastic bottle to measure liquid peroxides or accelerators. Content: 1l.
>
Art. No. Specification
125.618 1 l
TOOLS & ACCESSORIES:
8383
Poly Measuring Cup
Description
Measuring Cup to measure MEKP hardener or cobalt accelerator. 500 ml
with 10 ml scale or 2000 ml with 100 ml scale.
>
Art. No. Specification
125.510 2000 ml with 100 ml scale
125.509 500 ml with 50 ml scale
125.508 100 ml
Manual Dosing Pump
Description
Easy method for measuring liquids like resins, lacquers, peroxides and many
other pumpable liquids directly from the container.
The piston is moved by a lifting arm or a crank. The measuring amount can
be read on the scale of the glass cylinder.
The pump is made of glass, stainless steel, aluminium, PTFE, PVDF or PP.
It has good resistance to solvents and their preparations. The pump is not
resistant against acids and bases. These must be measured with pumps
made of PP or PVDF.
Characteristics
- No weighing or decanting
- High safety and cleanness at work
- Low material loss
- No energy supply required
>
>
Art. No. Specification
137.578 1000 ml PP
137.770 100 ml HV-50
137.576 100 ml NV-PP
137.577 500 ml PP
Multi-Mix
Description
High quality disposable mixing cup for clean and precise mixing of all paint
materials.
Characteristics
Transparent cup with a mixing scale from 1:1 to 5:1.
>
>
Art. No. Specification
140.549 Lid / 0,385 l
140.550 Lid / 0,75 l
140.552 Lid / 2,3 l
140.551 Lid / 1,4 l
140.545 Cup / 0,385 l
140.546 Cup / 0,75 l
140.548 Cup / 2,3 l
140.547 Cup / 1,4 l
TOOLS & ACCESSORIES:
84
Dispenser Multi Mix
Description
High quality dispenser for Multi-Mix cups.
>
Art. No. Specification
137.664 0,385 l
137.665 0,75 l
137.666 1,4 l
137.667 2,3 l
PE Coated Paper Cup
Description
Mixing and stirring cup to process and pre-measure epoxy and polyester
resins, 484 ml volume.
>
Art. No. Specification
125.886 500 ml
Poly Cup
Description
Flexible, re-usable bowl.
>
Art. No. Specification
125.506 Poly Cup red
Plastic Bowl
Description
Plastic bowl to mix polyester resin
Characteristics
Diameter: 24 cm
Content: 2.8 l
>
>
Art. No. Specification
143.090 Ø 24 cm; content 2,8 l
TOOLS & ACCESSORIES:
8585
Bucket
Description
Round plastic bucket
Content: 10 l
>
Art. No. Specification
137.569 10 l bucket
Wooden Stirrer
Description
Length: 15 cm
Packing unit: 500 pcs.
>
Art. No. Specification
127.471 Length 15 cm
Stirring Stick
Description
To stir small amounts, 23 cm and 30 cm length.
>
Art. No. Specification
126.007 Length 23 cm
138.328 Length 30 cm
Dissolver Mixer
Description
A highly effective mixer for stirring filling materials like aluminium hydroxide,
talcum, thixotropic powder, etc. For machines up to 4000 rpm; fitting top
part under the spinner.
>
Art. No. Specification
136.231 Ø 120 mm, shaft 60 cm
136.230 Ø 90 mm, shaft 60 cm
136.232 Ø 145 mm, shaft 100 cm
TOOLS & ACCESSORIES:
86
Frictional Mixer
Description
To mix PUR foams fast and thoroughly.
>
Art. No. Specification
125.513 Ø 45 mm, shaft 32,5 cm
125.512 Ø 65 mm, shaft 33 cm
125.511 Ø 90 mm, shaft 34 cm
Screw Mixer
Description
To stir settled materials.
>
Art. No. Specification
125.514 Ø 75 mm, shaft 38 cm
Mixing Propeller
Description
To mix viscous PUR compounds.
>
Art. No. Specification
127.461 Ø 100 mm, shaft 40 cm
Propeller Mixer for Drums
Description
Fits through the 2 inch (50mm) bung. The centrifugal force causes the blades
to open automatically, Ø 230 mm when unfolded. It has a 110 cm long shaft.
>
Art. No. Specification
125.521 Ø 230 mm, shaft 110 cm
TOOLS & ACCESSORIES:
8787
Drum Key
Description
Fits both bungholes on the 200 litre drums of 3/4‘‘ und 2‘‘ Ø.
>
Art. No. Specification
127.463 for 3/4‘‘ and 2‘‘ bungholes
Drum Frame
Description
Mobile drum frame. Ideal to transport and store a drum. The drum content
can be mixed by rotating the drum on the frame.
>
Art. No. Specification
125.672 Drum Frame
Polyethylene Drum Tap
Description
3/4‘‘: Fits the small opening of polyester resin drums. With solvents it has
only limited resistance against leakage.
2‘‘: Fits the large opening of the drum. Used for filling viscous fluids.
>
Art. No. Specification
139.811 Ø 3/4‘‘
127.454 Ø 2‘‘
Dualmatic 32 EXV-AVDispenser for fillers - manual
Description
Hand operated and portable dispenser for filler and hardener cartridges. It
dispenses in the required mixing ratio. The hardener addition can be control-
led by adjusting the hardener control arm.
Area of application
Portable, handy dispenser for 3 kg cartridges. Hand operated.
>
>
Art. No. Specification
123.892 for 3 kg cartridges
TOOLS & ACCESSORIES:
88
DispenserDispenser for fillers - pneumatic
Description
A pneumatic dispenser that discharges the filler and hardener cleanly and in
a set mixing ratio, saving on wastage.
Area of application
Pneumatically operated, wall-mounted dispenser:
A3C = for 3 kg cartridges.
A10C = for 10 kg cartridges
>
>
Art. No. Specification
123.859 A 3C
123.840 A 10C
136.912 Spare part set A 3C/A 10C
Uniflex GunHand operated gun
Description
Classic: for cartridges.
Top: for cartridges and aluminium bags.
>
Art. No. Specification
135.108 Classic for 310 ml
139.286 Top up to 400 ml
Pump SprayPressurised atomiser
Description
For applying (atomising) liquids evenly and consistently. Solvent resistant
due to Viton seals.
>
Art. No. Specification
137.744 1 l
TOOLS & ACCESSORIES:
8989
Nylon Roller
Description
For laminates with a large surface area. The roller can be removed and a
longer shaft can be used, roller width 180 mm
>
Art. No. Specification
125.501 width 180 mm with holder
125.502 roll with 180 mm width
137.567 long shaft 60 cm
137.568 long shaft 130 cm
ROLLER, BRUSHES & SPREADERS
Replacement Rollerfor the Nylon Roller
Description
Replacement roller for the Nylon Roller. Solvent resistant.
>
Art. No. Specification
139.902 width 140 mm
Mini Wool Roller
Description
For laminates with a small surface area. Made of synthetic material. The
roller can be removed.
>
Art. No. Specification
137.562 holder long
137.560 roll 100 mm white
TOOLS & ACCESSORIES:
90
Gelcoat Brush
Description
Special brush for the even application of gelcoats, sealing and topcoats, 10
cm width.
>
Art. No. Specification
125.490 width 100 mm
Round Brush
Description
Available in size:
- No. 2: 15 mm Ø
- No. 4: 20 mm Ø
- No. 8: 30 mm Ø
- No. 12: 40 mm Ø
>
Art. No. Specification
125.492 Ø 15 mm
125.493 Ø 20 mm
125.494 Ø 30 mm
125.495 Ø 40 mm
Flat Brush
Description
- Flat brush
- Wooden shaft
>
Art. No. Specification
129.389 width 25 mm
129.390 width 35 mm
129.391 width 50 mm
129.392 width 60 mm
129.393 width 75 mm
Surfacing Brush
Description
Competitive priced brush for e.g. impregnations, 3 cm x 10 cm width.
>
Art. No. Specification
125.491 width 100 mm
TOOLS & ACCESSORIES:
9191
Plastic Spreader
Description
Very tough and solvent resistant. 12 cm width.
>
Art. No. Specification
125.503 120 mm
Profi Cutter
Description
18 mm with metal blade carrier
>
Art. No. Specification
137.575 Cutter 18 mm
Wheel Cutter
Description
Wheel Cutter to cut multilayer reinforcements of glass or carbon fibres.
The Wheel Cutter is equipped with a tension adjustable lever and a safe
guard. The blades are made of SKS-7 Tungsten steel.
>
Art. No. Specification
140.219 Wheel Cutter
140.220 spare knife
Flexible Wedge
Description
Demoulding wedge.
>
Art. No. Specification
137.591 1 1/2“ x 4“
137.592 2 1/4“ x 6“
137.593 3“ x 10“
TOOLS & ACCESSORIES:
92
Medflex Wedge
Description
Demoulding wedge.
>
Art. No. Specification
137.585 1 1/2“ x 4“
137.587 3“ x 10“
Standard Wedge
Description
Demoulding wedge.
>
Art. No. Specification
137.588 1 1/2“ x 4“
137.589 2 1/4“ x 6“
Metal Disc Roller
Description
Metal disc roller for de-airing. For all hand lay-up and spray-up laminates.
>
Art. No. Specification
125.482 Ø 15 mm, width 80 mm
125.479 Ø 40 mm, width 120 mm
125.480 Ø 40 mm, width 65 mm
DE-AIRING ROLLER
TOOLS & ACCESSORIES:
9393
Finned Roller
Description
High quality Delrin ® roller.
>
Art. No. Specification
133.213 Ø 10 mm, width 50 mm
125.485 Ø 10 mm, width 80 mm
125.483 Ø 15 mm, width 40 mm
125.487 Ø 20 mm, width 80 mm
125.484 Ø 25 mm, width 135 mm
125.488 Ø 30 mm, width 90 mm
125.489 Ø 30 mm, width 195 mm
125.486 Ø 50 mm, width 8 mm
125.616 Ø 15 mm, width 80 mm
Small Flexiroller
Description
Flexible de-airing roller. For small curved sections, Ø 26 mm x 90 mm roller
width, 32 windings in 3 mm section.
>
Art. No. Specification
125.477 Ø 26 mm, width 90 mm
Large Flexiroller
Description
Flexible de-airing roller. Suitable for curved sections, Ø 40mm x 130 mm
roller width, 25 windings in a 5 mm section.
>
Art. No. Specification
125.475 Ø 40 mm, width 130 mm
Metal Disc Edge Roller
Description
De-airing roller for edges; Ø 50 mm x 8 mm.
>
Art. No. Specification
125.481 Ø 50 mm, width 8 mm
TOOLS & ACCESSORIES:
94
Spiked Roller
Description
De-airing roller. Removes air bubbles from thick casting and coating com-
pounds. Spike length 15 mm, roller width 23 cm.
>
Art. No. Specification
139.809 width 23 cm
Aluminium Roller
Description
Cross grooved de-airing aluminium roller.
>
Art. No. Specification
125.583 Ø 21 mm, width 70 mm
125.584 Ø 21 mm, width 135 mm
125.585 Ø 40 mm, width 70 mm
125.586 Ø 40 mm, width 135 mm
125.590 Ø 40 mm, width 170 mm
Disc Roller for De-airing
Description
Suitable for large, curved and uneven sections.
>
Art. No. Specification
136.866 Ø 40 mm, width 120 mm
136.865 Ø 40 mm, width 60 mm
136.933 Ø 40 mm, width 14 mm
TOOLS & ACCESSORIES:
9595
QuickfinderA
Aerocell........................................ 21
AFH-1 .......................................... 78
Aluminium Roller.......................... 94
APW............................................. 78
BB Component Type II ............. 36, 45
BPO-hardener powder / paste..... 18
Bucket ......................................... 85
Buff 804 RU ................................. 73
Buff 880 A.................................... 73
CCobalt-Accelerator 1% ................ 19
Cobalt-Accelerator 10 % ............. 19
DDisc Roller for De-airing............... 94
Dispenser..................................... 88
Dispenser Multi Mix ..................... 84
Dissolver Mixer ............................ 85
DMA-Accelerator 10 %................ 19
Drum Frame................................. 87
Drum Key..................................... 87
Dualmatic 32 EXV-AV................... 87
EElastocoat C 6698 ....................... 44
Elastocoat C 6698/50 .................. 43
Elastocoat C 6698/70 .................. 44
Elastocoat C 6770/1 .................... 44
Elastocoat C 6781 ....................... 45
Elastocoat C 6782 ....................... 45
Elastocoat C 6905 ....................... 46
Epolit CK ..................................... 55
Epolit OV...................................... 56
Epolit UN ..................................... 56
Epoxy BK..................................... 54
Epoxy BN..................................... 54
Epoxy LN-1.................................. 55
Estovoss Standard....................... 47
Estovoss Super............................ 48
FFinned Roller................................ 93
FL 501/GTS ................................. 18
FL 505.......................................... 17
Flat Brush .................................... 90
Flexible Wedge ............................ 91
Flexovoss K10 ............................. 42
Flexovoss K 14 ............................ 43
Flexovoss K6H............................. 41
Flexovoss K6S & K6T .................. 41
Flexovoss K7 ............................... 42
Flexovoss K9 N............................ 42
Formula Five Cleaner ................... 70
Formula Five Wax ....................... 76
Frictional Mixer ............................ 86
GG4................................................ 46
G8 Super ..................................... 47
Gelcoat Brush.............................. 90
Glosscoat..................................... 57
HH200-AT....................................... 38
H400-AT....................................... 39
H 40 B2........................................ 39
H50-AT......................................... 37
H75-AT......................................... 38
Hostaphan Foil............................. 79
HR-AT .......................................... 36
HR77-AT ...................................... 37
IInhibitor P1 .................................. 20
>
>
>
>
>
>
>
>
>
LLarge Flexiroller ........................... 93
MM-100 .......................................... 71
M-200 .......................................... 71
M-300 .......................................... 72
M-400 .......................................... 72
M-50 ............................................ 71
M-500 .......................................... 75
M-700 .......................................... 75
M-800 ......................................... 75
Manual Dosing Pump................... 83
MB-12.......................................... 20
Measuring Bottle.......................... 82
Medflex Wedge ............................ 92
Metal Disc Edge Roller ................ 93
Metal Disc Roller.......................... 92
Mini Wool Roller ........................... 89
Mixing Propeller ........................... 86
Multi-Mix...................................... 83
NNylon Roller ................................. 89
PPE Coated Paper Cup.................. 84
Pipette ......................................... 82
PL 5-1 .......................................... 20
Plastic Bowl ................................. 84
Plastic Spreader .......................... 91
Poly Cup ...................................... 84
Polyester Fillers ........................... 24
Polyethylene Drum Tap ................ 87
Poly Measuring Cup .................... 83
Polyurethane Thinner ................... 48
Profi Cutter .................................. 91
Propeller Mixer for Drums............ 86
Pump Spray ................................. 88
PUR Accelerator .......................... 49
RRelease Lacquer Clear................. 74
Release Lacquer Green ............... 74
Release Spray.............................. 74
Replacement Roller...................... 89
Round Brush................................ 90
SSanding Gelcoat (H), (S)............... 14
Screw Mixer ................................. 86
Sicovoss NL ................................ 62
Sicovoss RF................................. 62
Silastic ® 3133 ........................... 63
Silastic ® 3481 ............................ 64
Silastic ® 3483 ............................ 65
Silastic ® 3496 / 3497 / 3498 ...... 65
Silastic ® M ................................. 66
Silastic ® P-1............................... 66
Silastic ® S .................................. 66
Silastic ® S-2............................... 67
Silastic ® T-2 ............................... 67
Small Flexiroller............................ 93
Special Scissors .......................... 82
Speedcoat SC.............................. 57
Spiked Roller ............................... 94
Standard Wedge .......................... 92
Stirring Stick ................................ 85
Surfacing Brush ........................... 90
TTalcum Powder ............................ 21
TR-102......................................... 76
TR-104......................................... 76
TR-108......................................... 77
TR-210......................................... 70
TR-301......................................... 72
TR-311......................................... 72
>
>
>
>
>
>
>
TR-900......................................... 77
TR-905......................................... 70
TR-910......................................... 78
TR-920......................................... 77
TX1 .............................................. 21
UUniflex Gun .................................. 88
UPS Ferro-Alu.............................. 29
UPS Ferro-Faser .......................... 28
UPS Ferro-Fix .............................. 29
UPS Ferro-Glas............................ 28
UPS Ferro-Multi ........................... 28
UPS Ferro-Multi-Plus................... 31
UPS Ferro-Spray.......................... 29
UPS Ferro-Top ............................. 30
UPS FEW ..................................... 26
UPS Fill 21-1................................ 31
UPS KK-Plast .............................. 26
UPS Lightplast............................. 27
UPS Model Filler .......................... 30
UPS V-11 ..................................... 27
UPS Zinc Filler ............................. 31
VViscovoss Azur Super + ............... 10
Viscovoss G 311 SB (H) ............... 14
Viscovoss G 323 (H), (S) .............. 15
Viscovoss KL1 ............................. 11
Viscovoss KL3 ............................. 12
Viscovoss KL4 ............................. 12
Viscovoss KL6 ............................. 13
Viscovoss KL7 ............................. 13
Viscovoss KL8 ............................. 13
Viscovoss LT 30 SB ..................... 16
Viscovoss LT 35 SB ..................... 16
Viscovoss LT 40 SB ..................... 17
Viscovoss N 35 BT....................... 15
Viscovoss N 50S.......................... 11
Viscovoss T 40 B ......................... 10
Viscovoss T 40 BT ....................... 15
WW2 ............................................... 73
Wheel Cutter ................................ 91
Wooden Stirrer............................. 85
WR-AT.......................................... 40
YYC Nautic Filler ............................ 30
ZZR-AT........................................... 40
>
>
>
>
>
CATALOGUE INDUSTRY:
IND
US
TR
YC
AT
AL
OG
UE
Art
.-N
r. 7
06.5
23
Vosschemie GmbH
Esinger Steinweg 50
25436 Uetersen
Germany
Phone: +49 (0) 4122 / 717 -0
Fax: +49 (0) 4122 / 717 -158
info@vosschemie.de
Vosschemie GmbH
Wellerswalder Weg 24
04758 Oschatz
Germany
Phone: +49 (0) 3435 / 6202 -58
Fax: +49 (0) 3435 / 6202 -62
www.vc-24.de
www.vosschemie.de
The information is intended as a guide to application and is based on current information.
The information is offered in good faith and without guarantee or liability. Product specifications subject to change and availability.
© VOSSCHEMIE 2008, 1. Auflage
top related