voss gesamtkatalog en - vosschemie · products for best solutions. vosschemie has many years of...

CATALOGUE INDUSTRY:

IND

US

TR

YC

AT

AL

OG

UE

Art

.-N

r. 7

06.5

23

Vosschemie GmbH

Esinger Steinweg 50

25436 Uetersen

Germany

Phone: +49 (0) 4122 / 717 -0

Fax: +49 (0) 4122 / 717 -158

[email protected]

Vosschemie GmbH

Wellerswalder Weg 24

04758 Oschatz

Germany

Phone: +49 (0) 3435 / 6202 -58

Fax: +49 (0) 3435 / 6202 -62

www.vc-24.de

www.vosschemie.de

The information is intended as a guide to application and is based on current information.

The information is offered in good faith and without guarantee or liability. Product specifications subject to change and availability.

© VOSSCHEMIE 2008, 1. Auflage

Products forbest solutions.

VOSSCHEMIE has many years of experience in handling unsaturated

polyesters and polyurethanes as well as epoxides and silicones. In these

product fields we formulate a variety of different solutions for our clients,

always directed towards the ever rising demands of the market.

As a system provider, we complete our assortment with products

from well known producers from all over the world. Our product range

is supplemented by auxiliary materials, tools and processing machines.

Through personal technical advice we assure that our customers

receive exactly the products, which are suitable for their application.

Our recipe for successful business.

FROM PRODUCT DEVELOPERTO SYSTEM PROVIDER

Founded in 1955 VOSSCHEMIE is today an

internationally active enterprise with 57 partners worldwide.

The name VOSSCHEMIE represents intelligent and practical

solutions for many sectors.

QUALITY FROM OWNDEVELOPEMENT

We provide high-quality products that are made and developed

in our own facilities.Today our product line consists

of more than 1500 products.

COMPETITIVE PLAYERIN THREE BUSINESS SEGMENTS

VOSSCHEMIE serves customers through three business units,

which increase speed and efficiency by sharing

technological, manufacturing, marketing and other resources.

> BU Industry > BU Automotive> BU Retail

: OUR CORE BUSINESS

> Unsaturated Polyester

> Reinforcements

> Polyurethane

> Fillers

> Epoxy

> Silicone

> Cleaning, Care & Release Agents

> Tools & Accessories

> Personal Safety

: DISTRIBUTION PARTNERS

Index

Unsaturated Polyester .............................. 7

Fillers ........................................................ 23

Polyurethane............................................. 33

Epoxy........................................................ 51

Silicone ..................................................... 59

Cleaning, Care & Release Agents............. 69

Tools & Accessories.................................. 81

:

UNSATURATED

POLYESTER

:

UNSATURATED POLYESTER

Properties

Mechanical and Electrical PropertiesThe UP-SYSTEM types of unsaturated resins range from brittle to tough and from rigid to flexible.

Using reinforcement fibres the strength can equal that of structural steel and provide a favourable

strength/weight ratio. At low temperatures the resins embrittle less than thermoplastics. They have

good heat resistance. E-glass reinforced laminates possess good electrical insulation properties and

dialectic behaviour as well as excellent creep or tracking resistance.

Chemical ResistanceThe UP-SYSTEM polyester resins generally have good chemical resistance to a range of chemicals

at normal concentrations. In our range you will find the suitable resin for your application.

Processing

• Unfilled resins:

As a cold curing casting resin for electronic encapsulation, casting in general and for decorative

embedding

• Filled with powder or chopped strands or glass fibre:

As fillers and bonding materials

• With fibre reinforcement: Processed by means of hand lay-up or spray-up application. They can

also be used with foil/vacuum machines, vacuum injection as well as cold and hot press moulding.

• Hollow parts: can be produced using filament winding

• Rotational means: using the centrifugal process

• Pultrusion: producing rods, pipes and other profiles

Various types of UP resins are available: General purpose laminating resins, gelcoats, sealing top-

coats, air drying coatings, bonding and embedding resins. The label UP-SYSTEM stands for a wide

range of high quality polyester resins.

Applications:

Non-Reinforced Casting Resins

• The casting of electrical and electronic components

• Decorative encapsulation and clear castings

• Producing moulds and patterns

Reinforced Casting Resins

• For vehicle production:

Car bodies, parts of car bodies such as bumpers (fenders), bonnets, spoilers and boot lids, boat

hulls, in panelling for aircraft interiors, bodies of trains, containers for sea transport etc.

• Construction work:

Translucent roofing sheets, coating roofs, external cladding panels, shop fronts and shelters,

prestige foyers in offices, airports and other areas etc.

• Hobbies and sport:

Figures for leisure and theme parks and for play equipment in childrens play grounds, waterslides

and whirlpools for swimming pools etc.

• Installations:

Oil tanks, food tanks, transport containers etc.. Using filament winding large diameter pipes are

constructed.

• Machine and tool construction:

Castings for machines, making patterns for moulds and reproducing tools etc.

• Furniture manufacture:

For manufacturing tables and chairs, for garden furniture etc.

• Theatre and film studios:

Making scenery and special props, figures etc.

• Moulding materials:

In electrical work resins are used in coil winding and encapsulation of electronic components.

Decorative mouldings for both office and household appliances.

10

Viscovoss Azur Super +

Description

Viscovoss Azur Super + is an environmental resin with a strongly reduced

styrene emission. It is a cobalt accelerated, medium reactive orthophthalic

resin for normal requirements. This low viscosity (500-600 mPa.s), thixo-

tropic resin hardens with a lower heat reaction and is hardened with MEKP.

Viscovoss Azur Super + contains a colour indicator which changes from blue

to green after the hardener has been added. When half of the processing

time is over the resin changes into a yellow colour. The resin is suited for

hand lay-up and spray-up application.

Area of application

Normal use is for laminating moulded parts and as a casting resin:

a) Glass fibre reinforced:

- Elements for the building industry

- Boat construction

- Coating of cold water tanks

- Covers for machine parts

- Furniture production

- Vehicle construction

- Mould construction

b) With filling materials:

- Polyester concrete

- Encapsulation of electric wiring

- Sculptures / surface relief patterns

Characteristics

Amount used: 1x woven fabric, 3x mat weight

Potlife: ca. 20-90 minutes depending on layer thickness

Curing agent: 1-3 % MEKP

Colour: blue (liquid); yellowish (cured)

>

>

>

Art. No. Specification

141.117 1,0 kg incl. hardener


139.655 30,0 kg

139.656 225,0 kg

139.657 1000,0 kg

LAMINATING RESINS

Viscovoss T 40 B

Description

Viscovoss T 40 B is an accelerated neopentylglycol terephthalic-acid resin

with good chemical resistance, suitable for water temperatures up to 30°C.

T 40 B is hardened with MEKP and can be applied by means of the hand

lay-up and spray-up method.

Area of application

Construction parts and laminates affected by chemicals, high temperatures

and weather conditions:

- Swimming pools up to 30°C

- Container and pipe construction

- Chemical plants

Characteristics


Curing agent: 2 % MEKP

Colour: transparent

>

>

>


124.754 5,0 kg

124.756 30,0 kg

124.757 220,0 kg

UNSATURATED POLYESTER:

1111

Viscovoss N 50S

Description

Viscovoss N 50S is a non-accelerated, low viscosity, medium reactive ortho-

phthalic resin with excellent transparency and good weathering resistance.

Glass fibre reinforced, N 50S is suitable for the hand lay-up and spray-up

method.

Area of application

Transparent moulded parts and coatings, casting resin:

a) Glass fibre reinforced:

- Dome shaped and translucent roofs for the building industry

- Transparent and tinted parts

- Decorative parts

b) With filling material:

- Decorations

Characteristics


Curing agent: cobalt/ MEKP

Colour: highly transparent

>

>

>


124.956 5,0 kg

124.957 30,0 kg

124.958 220,0 kg

SPECIAL RESINS

Viscovoss KL1Polyester bonding resin

Description

KL1 is a cobalt accelerated polyester bonding resin based on orthophthalic

acid. It contains fillers and has a paste consistency. KL1 is used for bonding

and filling. When used for bonding it has good impact resistance and good

resistance to moisture and many diluted chemicals. The product is hardened

with 1 to 3 % MEKP.

Area of application

For bonding and filling:

- Cured polyester laminates

- Wood

- Aluminium

- Steel

- Stainless steel

- PVC and PUR foam

- Stone

- Concrete

Characteristics

Amount used: 1.4 kg/l

Potlife: ca. 9-24 minutes


Colour: cream white

>

>

>


124.730 30,0 kg

BONDING RESINS


12


Description

KL3 is a fibre reinforced, cobalt pre-accelerated, transparent, orthophthalic

polyester bonding resin. It has good resistance to moisture and many diluted

chemicals.

KL3 is cured with 1-3 % MEKP hardener and has a high tensile strength. It is

used in the boat, car body and building industry and where high mechanical

strength is required.

Area of application



- Wood

- Aluminium

- Steel

- Stainless steel

- PVC and PUR foam

- Stone

- Concrete

Characteristics




Colour: transparent

>

>

>


124.838 30,0 kg


Description

KL4 is a light weight, pre-accelerated, cold curing, polyester bonding resin

based on orthophthalic acid. The adhesive has good impact resistance as

well as good resistance to moisture and many diluted chemicals.

It is cured with 1-3 % MEKP and has a low specific gravity (0.72 kg/l). KL4 is

used for bonding of sandwich core sheets in the boat, car body and building

industry, for fixing and for model construction.

Area of application



- Wood

- Aluminium

- Steel

- Stainless steel

- PVC, PUR, balsa sandwich cores

- Stone

- Concrete

Characteristics


Potlife: 15 to 45 minutes


Colour: milky white

>

>

>


124.850 25,0 l


1313


Description

Viscovoss KL6 is a pre-accelerated, semi-flexible polyester bonding resin

based on orthophthalic/ isophthalic acid, formulated with glass fibres. It

cures at room temperature (18-25°C) with MEKP and has good resistance

to moisture and many diluted chemicals. It contains a blue colour indicator

which allows the control of the catalyst addition.

Area of application

Viscovoss KL6 is especially used for producing radiuses, for bonding polyes-

ter GRP parts and parts of other materials. The low development of internal

heat allows the application in thick layers.

Characteristics


Potlife: ca. 15 minutes


Colour: pale blue

>

>

>


139.400 20,0 kg


Description

Viscovoss KL7 is a pre-accelerated, flexible polyester bonding resin formu-

lated with glass fibres. It cures at room temperature (18-25°C) with MEKP

and has good resistance to moisture and many diluted chemicals. It has low

shrinkage and is suitable for filling and bonding.

Area of application

Viscovoss KL7 is used to join GRP where a thicker application is needed.

KL7 can be applied quickly without air entrapment and formation of blisters.

The low exothermic reaction prevents the distortion of the surface.

Characteristics




Colour: white

>

>

>


139.401 25,0 kg


Description

VISCOVOSS KL8 is an pre-accelerated, highly flexible polyester bonding

resin formulated without glass fibres. It cures at room temperature (18-25°C)

with MEKP. It has low shrinkage and a high elongation at break. KL8 is suita-

ble for filling and bonding applications.

Area of application

- For bonding unsaturated polyester GRP

- For filling small cavities

- For thin joints when using polyurethane foam, balsa, etc.

Characteristics




Colour: light blue

>

>

>


139.402 25,0 kg


14

Sanding Gelcoat (H), (S)

Description

Sanding Gelcoat is a cobalt accelerated polyester gelcoat with an excellent

sandability. The gelcoat can be cured with MEKP hardener and then be

applied like a standard gelcoat (sprayed or hand applied).

Area of application

Special gelcoat with an excellent sandability for all GRP-parts having to be

painted afterwards and for mould making using the 2-foil-vacuum-method.

Characteristics

Amount used: ca. 0.6 kg/m²


Curing agent: 3 % MEKP

Colour: white or grey

>

>

>


125.004 grey / H / 30,0 kg

136.521 grey / S-T / 30,0 kg

125.015 white / H / 30,0 kg

136.522 white / S-T / 30,0 kg

GEL- & TOPCOATS

Viscovoss G 311 SB (H)

Description

Viscovoss G 311 SB is a cobalt accelerated, light stabilized gelcoat with an

extremely high elongation at break (7,1 %), high impact strength and scratch

resistance.

The gelcoat can be pigmented with 10-25 % (preferably 15 %) UP pigment

paste. G 311 SB is hardened with MEKP.

Area of application

Parts exposed to weathering and water, parts subject to deformation, abrasi-

on or low temperatures.

Characteristics

Amount used: ca. 0.6 kg/m²



Colour: refer to the chart

>

>

>


124.954 colourless / 1,0 kg incl. hardener

124.960 RAL 9010 / 1,0 kg incl. hardener

124.886 colourless / 5,0 kg

124.907 RAL 9010 / 5,0 kg

124.887 colourless / 30,0 kg

124.888 RAL 9010 / 30,0 kg


1515

Viscovoss G 323 (H), (S)

Description

Viscovoss G 323 is a cobalt accelerated polyester gelcoat based on iso-

phthalic acid which is weather resistant and has a good chemical resistance

to low concentrations of acids and bases. The transparent gelcoat is

available for spray and hand application and can be pigmented by adding

5-20 % UP pigment paste. The gelcoat is also available in several colours by

ordering over 200 kg. G 323 is cured with MEKP hardener.

Area of application

Viscovoss G 323 has been formulated for various application areas, e.g. sa-

nitary, marine, tanks, etc. It is ideally suited for all applications where a good

water and weather resistance is required.

Characteristics

Amount used: 0.6 kg/m²


Curing agent: 1.5 % MEKP

Colour: transparent

>

>

>


140.638 hand / 20,0 kg

140.639 spray / 20,0 kg

Viscovoss N 35 BT

Description

N 35 BT is a cobalt accelerated presealing resin that is applied in two

(pigmented) layers before the topcoat is applied. The layer thickness is

thus increased and the colour opacity of the topcoat is improved. N 35 BT

is hardened with MEKP and can be pigmented with 3-10 % by weight UP

pigment paste.

Area of application

Together with the topcoat LT 35 SB for GRP coatings.

N 35 BT does not replace the last coating with LT lacquer!

Characteristics

Amount used: 200 g/m² per coat



Colour: clear

>

>

>



124.769 5,0 kg

124.770 10,0 kg

124.771 30,0 kg

124.772 225,0 kg

Viscovoss T 40 BT

Description

T 40 BT is a cobalt accelerated presealing resin. It increases the layer thick-

ness of the Viscovoss LT 40 SB topcoat. T 40 BT is hardened with MEKP

and can be coloured with 3-10 % by weight UP pigment paste. It is applied

in two layers onto the tacky or sanded laminate before the LT lacquer is

applied.

Area of application

With Viscovoss LT 40 SB topcoat for GRP coatings.

Viscovoss T 40 BT does not replace the last coating with LT lacquer!

Characteristics

Amount used: 200 g/m² per coat



Colour: clear

>

>

>


124.773 5,0 kg

124.774 30,0 kg

124.775 225,0 kg


16

Viscovoss LT 30 SB

Description

LT 30 SB is a cobalt accelerated, light stabilized topcoat. It shows excellent

behaviour when used externally and hardens to a tack free and mat surface.

LT 30 SB is hardened with MEKP and can be coloured by adding 5-20 % by

weight UP pigment paste.

Area of application

Mainly for weather exposed GRP laminates:

- The reverse side of all types of GRP moulded parts that are subject to low

chemical exposure

- Coatings affected by weather conditions

Characteristics

Amount used: 200 g/m²



Colour: clear

>

>

>


124.778 30,0 kg

124.779 225,0 kg

Viscovoss LT 35 SB

Description

LT 35 SB is a cobalt accelerated, light stabilized topcoat. It has good

resistance to chemicals and hardens to a tack free and mat surface.

LT 35 SB is hardened with MEKP and can be coloured with 5-20 % by

weight UP pigment paste. With DMA as a promoter, it is also possible to use

LT 35 SB at low temperatures.

Area of application

GRP laminates with orthophthalic and isophthalic acid resins:

- Reverse side of GRP moulded parts

- Coating of swimming pools with a water temperature of up to 27°C

- Sandwich parts

- Collection tanks exposed to chemicals

- Chemical basins

Characteristics




Colour: clear

>

>

>



124.780 5,0 kg

124.781 10,0 kg

124.782 30,0 kg

124.783 225,0 kg


1717

Viscovoss LT 40 SB

Description

LT 40 SB is a cobalt accelerated, light stabilized topcoat. It has a very good

resistance against chemicals and hardens to a tack free, mat surface. LT 40

SB is hardened with MEKP and can be coloured with 5-20 % by weight UP

pigment paste.

Area of application

GRP laminates with terephthalic acid and neopentylglycol-terephthalic acid

resins:

- Rear side of GRP laminates

- Swimming pool coatings with a water temperature of up to 30°C

- Sandwich parts and the sheathing of boats

- Chemical tanks requiring high chemical resistance

Characteristics




Colour: clear

>

>

>



124.784 5,0 kg

124.785 30,0 kg

124.786 225,0 kg

FL 505MEKP hardener

Description

FL 505 is used for rapid cold curing of cobalt accelerated polyester resins

and gelcoats. MEKP FL 505 is a 50 % solution in a stabilizing plasticizer.

Area of application

A hardener that causes rapid gelation and good hardening of cobalt accele-

rated polyester and vinylester resins:

- Laminating resins

- Casting resins

- Sealing resins

- LT lacquers

- Gelcoats

Characteristics

Amount to add: 1-3 %

Colour: clear

>

>

>


131.002 100 g

133.851 1,0 kg

133.850 25,0 kg

HARDENERS


18

FL 501/GTSMEKP hardener

Description

FL 501 is used for rapid cold curing of cobalt accelerated polyester and

gelcoat resins using the hand lay-up method. MEKP FL 501 is a 50 %

solution of methyl ethyl ketone peroxide in a stabilizing platicizer.

Area of application

A hardener that causes rapid gelation and good hardening of cobalt accele-

rated polyester and gelcoat resins:

- Laminating resins

- Casting resins

- Sealing resins

- LT lacquers

- Gelcoats

Characteristics


Colour: clear

>

>

>


125.683 20 g

133.852 100 g

125.685 1,0 kg

125.688 30,0 kg

BPO-hardener powder / paste

Description

BPO (benzoyl peroxide) is a peroxide for the rapid cold curing of amine

accelerated polyester resins and fillers. It leads to rapid hardening and de-

moulding even at low temperatures. At high temperatures (80-100°C) the

hardener can be used without accelerator. BPO is available as a paste or as

a powder, each with 50 % stabilizer.

Area of application

- Polyester fillers

- Resins that must cure rapidly, or at low temperatures

- Low reactive resins

Characteristics


Colour: red or white

>

>

>


124.631 red / 30 g

124.636 white / 30 g

124.630 red / 50 g

124.635 white / 50 g

136.859 red / 100 g

125.695 white / powder / 5,0 kg


1919

Cobalt-Accelerator 1%

Description

CO 01-1 is used as an accelerator for cold curing polyester resins with

hydro-peroxides (MEKP, AAP, CHP) to provide a medium to long potlife.

Cobalt Accelerator CO 01-1 has a metal content of 1 %.

Area of application

Cold curing polyester and vinylester resins:

- Laminating resins

- Gelcoats

- Sealants

- Topcoats

Characteristics

Amount to add: 0.3-2.0 %

Colour: purple

>

>

>


125.696 20 g

125.697 100 g

125.699 1,0 kg

125.700 5,0 kg

125.701 25,0 kg

ADDITIVES UP

Cobalt-Accelerator 10 %

Description

CO 10-1 is used as an accelerator for cold curing polyester resins together

with hydro-peroxides (MEKP, AAP, CHP) to provide a medium to long pot

life. Cobalt Accelerator CO 10-1 has a metal content of 10 %. Because of

the small quantity that is added it is only suitable for accelerating 30 kg and

larger cans. Only add the correct amount.

Area of application

Cold curing polyester and vinylester resins:

- Laminating resins

- Gelcoats

- Sealants

- Topcoats

Characteristics


Colour: purple

>

>

>


125.734 5,0 kg

DMA-Accelerator 10 %Amine accelerator

Description

DMA 10-1 is used for rapid cold curing of polyester resins with benzoyl pero-

xide powder or paste and results in a short potlife.

DMA 10-1 is a 10 % solution that can also be used as a promoter for cobalt

accelerated polyester and vinylester resins (e.g. at low temperatures). The

amine changes the resin to a slight yellow colour.

This product is used only for industrial purposes.

Area of application

Accelerator for rapid curing of polyester and vinylester resins in combination

with BPO hardener; promoter for the cobalt/MEKP hardening system:

- Repair resins

- Laminating resins

- Elastic roofing resins

- Topcoats

Characteristics

Amount to add: up to 3 %

Colour: yellowish clear

>

>

>


125.702 1,0 l


20

MB-12Cobalt amine accelerator

Description

MB-12 is an accelerator that contains cobalt and amine for use with polyes-

ter and vinylester resins. Can be hardened with either MEKP, AAP or BPO.

With MEKP – MB-12 has a potlife of 2.5 to 8 minutes (inhibitor is often used

when MEKP or AAP is added). With BPO the potlife is 1.5 hours. The accele-

rator has a 2 % cobalt and 10 % DMA content and causes a slight yellowish

colour. MB-12 is intended only for industrial use.

Area of application

An accelerator that provides good cure with MEKP and AAP even in thin

laminates:

- Laminating resins

- Gelcoats (certain conditions)

- Sealants

- Topcoats (certain conditions)

Characteristics

Amount to add: 0.3-2 %

Colour: purple

>

>

>


135.744 1,0 kg

134.314 25,0 kg

Inhibitor P1

Description

P1 is used to lengthen the potlife of accelerated polyester resins. With P1

it is possible to post-stabilize resins in order to lengthen their storage life at

normal temperatures.

Area of application

To lengthen the potlife of pre-accelerated polyester resins; to improve their

storage life:

- Resins for vacuum and filament winding processes

- Post-stabilization of resins in warm climates

- Polyester fillers

Characteristics

Amount to add: ca. 1 % to double the potlife

Colour: clear

>

>

>


125.718 1,0 l

125.719 10,0 l

PL 5-1Paraffin solution

Description

The paraffin solution is a 5 % solution of liquid paraffin in styrene. It is added

to polyester resins to obtain a tack free surface. PL 5-1 only has an effect

with an ambient temperature of 18 to 25°C.

If a further resin layer is applied, the paraffin layer must be well sanded off.

Area of application

An additive to improve the surface curing of polyester resins:

- Topcoats

- Tack free curing of laminating resins

Characteristics


Colour: clear

>

>

>


130.833 1,0 l

130.832 20,0 kg


2121

TX1Thixotropic powder

Description

TX1 ist used for thickening polyester resins to prevent drainage on vertical

surfaces. The powder must be mixed thoroughly with the polyester resin.

It should be used when no other resin is to come into contact with the pro-

duct, as thixotropic paste contains resin.

Area of application

Thixotropic agent for polyester resins:

- Laminating resins

- Sealants

- Gelcoats

- Roof resins

Characteristics

Amount to add: 0.5-3.0 % by weight

Piled density: ca. 50 g/l

Colour: whitish

>

>

>


125.868 0,1 kg

125.462 10,0 kg

AerocellLight weight filling material

Description

Aerocell is a filling material that consists of micro glass balloons. It is used

to produce a light weight filling compound for epoxy and polyester resins.

By adding 10 % (by weight) a paste of low thixotropy is made whereas with

a 20-30 % addition the resin is highly thixotropic. The resin mixture has a

whitish colour.

Area of application

To produce a light weight filling compound out of epoxy and polyester resins:

- Fills holes and small cavities

- Repair of foam cores of surfboards

- To fill bonding resins used to construct wooden boats

Characteristics

Amount to add: 10-30 % by weight

Piled density: 130 g/l

Colour: white

>

>

>


126.185 0,2 kg

125.770 4,0 kg

139.986 27,2 kg

Talcum Powder

Description

Talcum is used to fill polyester and epoxy resins to produce (amongst other

things) artificial stone and fillers. Talcum reduces shrinkage during cure. It

improves the sandability of fillers, but reduces the hydrolytic resistance.

Talcum does not contain asbestos or quartz.

Area of application

A powder filler for polyester and epoxy resins:

- Reduces shrinkage of resin systems

- Improves mechanical properties

- Thickens resins

Characteristics

Piled density: ca. 700 g/l

Consistency: powder

Colour: grey-white

>

>

>


139.985 25,0 kg


FILLERS:

FILLERS

Polyester Fillers

Polyester fillers have been produced by VOSSCHEMIE GmbH for more than 50 years. During this

time VOSSCHEMIE GmbH has become one of the leading producers of car repair fillers in Europe

as well as overseas. This has been achieved by developing new types of fillers as well as constantly

improving existing formulations. Our fillers are used mainly for car repair.

Under the label UP-SYSTEM (UPS) we arranged the fillers, which are especially used for producing

patterns and moulds, for surface finish of GRP mould parts before painting or for repairing GRP parts.

In addition, we offer for large-scale consumers dispensing systems for fillers and BPO hardeners

in industry cartridges as well as suitable fillers which are immersed in water, for GRP repair and for

producing moulds and models.

Properties

Because of ever increasing labour costs all our fillers have been formulated to apply and sand easily

so as to provide a surface ready to paint. These properties are much appreciated by the people who

work with these materials every day.

Almost all (98 %) of the polyester fillers we produce are hardened with Benzoyl Peroxide (mainly red)

paste. Because of its red colour it is easy to mix evenly as a car body filler must have a short curing

time i.e. be sandable after 15-20 minutes.

We are confident that you will be able to select the right filler for your requirements from our product

range.

Technical DataPolyester fillers normally contain 30-40 % polyester resin which is amine accelerated. It is cured by adding

1-5 % BPO hardener (usually 2-3 %). Fillers also contain mineral filling materials and pigments. Amongst

these are talc and titanium dioxide.

26

UPS FEWPolyester finishing filler white

Description

UPS FEW is a sandable, thixotropic surfacing filler providing a very smooth

and dense surface. It is used for fine surfacing of uneven surfaces and for

smoothing out various materials. UPS FEW is hardened with BPO and is

sandable after 15 minutes.

Area of application

Filling both shallow and deep dents, surfacing general purpose fillers:

- As a polyester stopper for surfacing fillers prior to painting

- On doors, windows both wood and metal prior to painting

- Boat repairs above the waterline

Characteristics



Curing agent: 1-3 % BPO paste

Colour: cream white

>

>

>






143.819 19,29 kg excl. hardener

124.620 310 g BPO hardener red

UPS KK-PlastPolyester body filler

Description

UPS KK-Plast is a thixotropic general purpose filler. The material has high

build strength and its main purpose is to smooth out dented metal. UPS KK-

Plast is cured with BPO hardener and can be sanded afer 15 minutes.

Area of application

Levelling out deep dents and depressions on metal, wood, GRP, concrete

etc:

- Car body repairs

- Filling material to repair damage or cracks in wood and concrete

- Repairing GRP laminates

Characteristics


Potlife: 4 minutes


Colour: grey

>

>

>





144.033 40,0 kg excl. hardener

124.617 1,0 kg BPO hardener clear

FILLERS:

2727

UPS LightplastPolyester lightweight filler

Description

UPS Lightplast is a thixotropic filler with a low specitic gravity (0.7 kg/l). The

material is easy to use and can be nailed or screwed. UPS Lightplast is also

a very effective filler for wood including M.D.F. due to its very easy sanding

and carving properties. It also accepts normal wood stains. UPS Lightplast

is hardened with BPO and can be sanded after 20 to 30 minutes.

Area of application

Filling and contouring of lightweight parts or where particularly easy shaping

is required, wood etc:

- Filling, levelling and moulding material for lightweight applications and for

model construction

- Repair filler for lightweight building elements

- Repair material for the cores of sandwich laminates

(except polystyrene foam)

- Moulding and finishing filler in orthopaedics

Characteristics




Colour: off white

>

>

>


124.317 700 g incl. hardener

UPS V-11Polyester glass fibre filler

Description

UPS V-11 is a thixotropic, filling and bonding compound with added glass

fibre. The material has low shrinkage and greater strength than a normal

filler. V-11 is hardened with BPO and should be coated with another filler

or topcoat because of its tacky surface. If V-11 is applied onto metal, it is

necessary to prime the surface with a polyester filler.

Area of application

Filling and levelling damaged metal, bridging larger gaps and holes, bonding

wood:

- Reinforcement of corroded metal surfaces (with an adhesive primer)

- Bonding wood and GRP parts where greater strength is required

- Filling and repairing damaged wood

Characteristics




Colour: brownish yellow

>

>

>




FILLERS:

28

UPS Ferro-FaserPolyester glass fibre filler

Description

UPS Ferro-Faser is a thixotropic filler with chopped glass fibre strands. The

material has low shrinkage and a greater strength than a normal filler. It can

be used for bridging rustholes as well as for filling deep depressions. UPS

Ferro-Faser is hardened with BPO. Ferro-Faser is applied onto a sanded

surface that must be primed with a regular body filler. To obtain a tack free

surface, Ferro-Faser should be coated with another polyester filler or wiped

off with solvents or be sanded.

Area of application

For filling and levelling of dents, holes and wide joints on metal, GRP, wood

etc.:

- Repairing corroded metal (with adhesive primer)

- Levelling out deep dents

- Contouring models

Characteristics


Potlife: 3 to 4 minutues

Hardening paste: 2 to 3 % BPO paste

Colour: yellow

>

>

>


124.343 29,0 kg

UPS Ferro-GlasPolyester fibre glass reinforced filler

Description

UPS Ferro-Glas is a further development of fibre putty.

- Improved sanding characteristics

- Spreads more smoothly and homogeneously

- Highly concentrated filler

- Adhesion to metallic bases

- For repairing small rust spots

Area of application

For filling deep imperfections and dents.

Characteristics




Colour: green

>

>

>



UPS Ferro-MultiPolyester multi functional filler

Description

UPS Ferro-Multi is a multi functional filler with good adhesion to galvanized

steel, aluminium, steel and tin-plated surfaces. It is easy to apply and fills

pinholes and other imperfections.

Area of application

Due to its consistency it can be used both for general filling purposes and

for very fine applications.

Characteristics


Potlife: 3-5 minutes


Colour: beige

>

>

>



FILLERS:

2929

UPS Ferro-SprayPolyester spray filler

Description

UPS Ferro-Spray is a thixotropic spray filler with high filling capability for

metal, GRP and wood. It is applied with a spray gun (2.5 mm nozzle). UPS

Ferro-Spray is thinned with max. 5 % Spray-Thinner before applying the

final coat to reduce the viscosity and to provide a very smooth surface which

minimizes the sanding work.

Before sanding the surface should be allowed to harden for 3-5 hours, or for

30 minutes when post cured at max. 60°C. The surface must be coated with

an acrylic based filler prior to painting.

Area of application

For filling and surfacing metal, GRP and wood:

- Body panels

- GRP parts

- Wooden moulds

- Chipboard and MDF (medium density fibreboard)

Characteristics


Potlife: 25 minutes

Curing agent: 3.5 % CHP hardener

Colour: grey

>

>

>



124.315 transparent / 1.0 l tin spray filler thinner

UPS Ferro-AluPolyester body filler

Description

UPS Ferro-Alu is a filling and spreading putty containing aluminium.

- Very easy to apply

- Special viscosity, enabling it to be applied in many required coat thicknesses

Area of application

For filling deep imperfections and dents.

Characteristics




Colour: silver

>

>

>



UPS Ferro-FixPolyester body filler

Description

UPS Ferro-Fix is an easy sanding polyester body filler. It has a creamy con-

sistency and is based on fine filling materials. It is very easy to apply. Also

suitable for filling deeper dents on vertical and horizontal surfaces.

Area of application

For filling dents and repaired bare metal surfaces on vehicle bodies.

Characteristics




Colour: grey

>

>

>



FILLERS:

30

UPS Ferro-TopPolyester brushable filler

Description

UPS Ferro-Top is a thixotropic filler for filling shallow, uneven or curved

surfaces, or masking glass fibre pattern. It can be applied to metal, GRP and

wood surfaces. Ferro-Top is hardened with BPO paste and is sandable after

15 minutes. To obtain a dense, pinhole free surface Ferro-Top is applied with

a brush.

Area of application

For filling small imperfections on metal, GRP or wood surfaces:

- For surfacing general purpose body fillers

- Smoothing surfaces on prototypes and models

Characteristics



Curing agent: 2 % BPO paste

Colour: beige

>

>

>



UPS Model FillerPolyester knifing filler

Description

UPS Model Filler is a reddish brown high viscosity filler. It is easy to apply

and has a low specific gravity. It was developed for producing patterns and

moulds, both large and small. If the filler is to be painted it must first have a

coat of a finishing or spray filler. The filler is mixed with BPO paste and can

be worked upon after 15 minutes.

Area of application

Making, contouring and repairing models and patterns:

- Models for tool production

- Designs for automobile prototypes

- Repairs to wooden patterns

Characteristics




Colour: reddish brown

>

>

>



YC Nautic FillerPolyester boat filler

Description

YC Nautic Filler is a two component filler material exclusively for water-

stressed laminates of glass fibre polyester plastic. YC Nautic Filler may be

applied and hardened with a thickness of only 1 mm per single application.

This coat can be sanded after a drying time of min. 3 hours.

Areas primed with YC Nautic Filler must be covered with two sealing coats

and one top coat.

If YC Nautic Filler has not been over-coated, it can react with GRP-Primer or

the antifouling agent.

Area of application

- Smoothes glassfibre polyester boat hulls in cold water areas

- Smoothes swimming pools and garden ponds made of polyester laminate

and filled with cold water

Characteristics



Curing agent: BPO paste

Colour: grey

>

>

>



FILLERS:

3131

UPS Zinc FillerPolyester multi functional filler

Description

UPS Zinc Filler is a multi functional adhesive polyester filler.

- Adhesion to galvanized steel

- Adhesion to aluminium and steel surfaces

- Adhesion to tin-plated surfaces

- Highly concentrated

- Very easy and pinhole free to apply

- Excellent sanding properties

Area of application

Due to its excellent adhesion properties UPS Zinc is a multi functional filler

and can be used both as a surface and fine filler.

Characteristics




Colour: beige

>

>

>



UPS Fill 21-1Polyester body filler

Description

UPS Fill is a highly viscous body filler that enables thick layers to be applied

on both vertical and horizontal surfaces. It hardens rapidly to a tack free

surface and sands easily.

Area of application

For filling dents and repaired bare metal surfaces.

Characteristics




Colour: grey

>

>

>



UPS Ferro-Multi-PlusPolyester multi functional filler

Description

This product is a multi functional polyester filler, which guarantees direct

adhesion to galvanized, aluminium and sheet steel surface without the need

of using a primer.

Due to its creamy consistency this product is the optimum filler both for

general filling purposes and for very fine, smooth, pinhole and tack free ap-

plications. This filler saves working time because it dries rapidly and is very

quick and easy to sand.

Area of application

For filling dents and repaired metal surfaces.

Characteristics




Colour: light grey

>

>

>



FILLERS:

POLYURETHANE:

POLYURETHANE

Properties · Processing · Application

Polyurethanes have good weather resistance but most turn slightly yellow. Their resistance to many

normal chemicals is known, but it is safest to make a practical test first.

Among others, polyurethane is not resistant to the following chemicals: acetone, many organic acids

(acetic acid), ammonia, methanol, methylene chloride, high concentrate mineral acids (nitrate, sul-

phur, salt, phosphoric acid).

Polyurethane Coatings

One component coatings are tough, have good adhesive strength and high abrasion resistance. The

material usually contains a solvent, is applied with a roller or sprayed (using a fresh air protective

mask). After the solvent has evaporated a reaction occurs with the moisture (in the air or substrate)

which leads to a duroplastic cross linkage.

The one component polyurethane is used as a concrete coating or as a bonding agent for GRP on

wood, mineral materials and steel – not stainless steel. It is also used as a paint coat on these ma-

terials. Pigmented polyurethanes have good abrasion and chemical resistance and are used as floor

coatings in warehouses and production halls, workshops, garages and as protection for concrete on

feeding containers and portable silos in the agricultural market.

The mechanical properties of the two component coatings can be altered by adding filling materials

to the A component. The viscosity increases gradually. The material is used as a casting or coating

compound and is applied by hand or machine.

They are used for mouldings or cores in the concrete and electronic industry and as mould compo-

nents in the technical field.

They can be applied as a thick coat to protect metals from abrasion or corrosion and polystyrene

foams from mechanical and chemical attack.

Self levelling coating systems are used for industrial floors exposed to high stress.

Polyurethane Foams

Polyurethane foams (PUR foams) can be hard, medium hard or flexible, with or without a skin. They

are available as one or two component foams, each type with a very different density, start time and

mechanical properties.

Duroplast polyurethanes (PUR) are one and two component coating, casting and foam materials.

The two component casting materials possess varying mechanical properties such as elasticity,

surface hardness and high tear strength.

One component foams have a density of 22 to 30 kg/m³ and can withstand a shear force of up to

1 kg/cm². They are available in aerosol cans containing a CFC free blowing agent. One component

foams harden by absorbing air moisture (as do the 1 component coatings). 1 component foams are

certified B2 as a building material according to DIN 4102 and are predominantly used for fixing and

sealing doors, window frames and around pipework.

Two component foams are CFC free and have a density of 10 kg/m³ (foam packaging) up to 700

kg/m³. Their properties are therefore very different.

They are mixed by hand or mechanically stirred and are poured into a mould or cavity. PUR foams

can also be sprayed onto the surface that is to be coated or insulated. Foams with a density up to

20 kg/m³ are used for foam packaging and insulation.

Hard foams with 40 to 60 kg/m³ are used for insulation both thermal and noise and filling buoyancy

chambers in boats and floating jetties. Sandwich cores are used for GRP or aluminium panels.

A spray foam that has at least 39 kg/m³, certified B2, can be used in the building industry.

Hard foams from 60 kg/m³ upwards can be walked on and are used on roofs (only those applied in

the building industry) and as a filling agent for buoyancy chambers.

Self supporting small castings and patterns can be made out of hard foam that has a density of 75

kg/m³ (structural foam). A foam with a density of 200 kg/m³ upwards can be nailed or screwed and is

used in the orthopaedic sector.

The compressive strength of soft foams can be altered by adjusting their density. They are used as

structural foam parts in the upholstery and vehicle industry (seat padding).

36

B Component Type IIPolyurethane B component

Description

B component Type II contains diphenylmethane-4.4’-diisocyanate (MDI)

and is used to cure 2 component polyurethane foams and systems. It is

important to work according to the mixing ratio given on the matching A

component to obtain the product properties and to prevent free isocyanate

or polyol particles in the cured product.

Area of application

To harden 2 comp. polyurethane foams:

- Unizell HR-AT / HR77-AT / H 40 B2

- Structural Foam H50-AT / H75-AT


2 comp. polyurethane systems:

- Elastocoat C6770/1

- Elastocoat C6781

- Elastocoat C6782

- Flexovoss K14

Characteristics

Colour: brown

>

>

>


126.309 1,0 kg

126.310 5,0 kg

126.311 10,0 kg

126.313 200,0 kg

FOAMS

HR-ATPolyurethane filling and insulation foam

Description

HR-AT is a CFC free, at least 91 % closed cell, 2 component hard foam

based on polyurethane with a cup density of ca. 50 kg/m³. It has a long reac-

tion time and can be mixed and poured by hand even in large amounts up to

ca. 10 kg. Mechanical processing reduces density and start time.

HR-AT is mixed with the B component Type II and is resistant to diluted

acids, bases and water.

Area of application

Hard, closed cell foam components and cavity filling:

- Thermal insulation

- Deep freeze insulation

- Buoyancy chambers in boats

- Filling of small buoys and life belts (unsinkable)

- Sandwich cores

- Providing stiffness

- Insulation to reduce sound

Characteristics

Amount used: ca. 50 g/l

Start time: ca. 37 seconds

Mixing ratio A:B = 100:145 parts by weight

Colour: yellowish

>

>

>


126.338 0,7 kg

126.341 3,5 kg

126.342 10,0 kg

POLYURETHANE:

3737

HR77-ATPolyurethane cavity filling and insulating

foam Description

HR77-AT is a CFC free, closed cell, 2 component hard foam based on

polyurethane with a very fine pore structure. It has a cup density of ca. 75

kg/m³ and can be mixed and poured by hand due to the long reaction time.

Machine processing reduces the density and start time.

HR77-AT is resistant to diluted acids, bases and water. The B component

Type II is used.

Area of application

Moulded parts and cavity filling:

- Filling cavities

- Filling material for use in taxidermy

- Model heads for wigs

- Increasing stiffness of sandwich construction

- Parts for model construction

Characteristics

Amount used: ca. 75-50 g/l


Mixing ratio A:B = 100:145 parts by weight with B component Type II

Colour: yellowish

>

>

>


126.327 0,7 kg

126.328 3,5 kg

126.329 10,0 kg

126.330 200,0 kg

H50-ATPolyurethane structural foam

Description

H50-AT is a relatively light, closed cell, CFC free, 2 component hard foam

that cures with a non porous skin when poured into a mould. The foam has a

cup density of ca. 50 kg/m³ and can be mixed and poured by hand because

of its long start time. Mechanical stirring reduces the density and start time.

If a large amount is poured into a closed mould, the density and pressure ex-

erted against the mould increases. H50-AT is foamed with the B component

Type II and is resistant to diluted acids, bases and water.

Area of application

Hard and shapeable components with a non porous surface and a low

density:

- Parts for model construction

- Decorative parts

- Filling material

- Precision components

- Models for design and prototypes

Characteristics




Colour: yellowish

>

>

>


126.324 10,0 kg

126.325 200,0 kg

POLYURETHANE:

38


Description

H75-AT is a CFC free, closed cell, 2 component hard foam that cures to a

non porous surface when poured into a mould. It has a cup density of ca.

75 kg/m³ and can be mixed and poured by hand as it has a long start time.

Mechanical mixing reduces the density and start time. If a large amount is

poured into a closed mould, the density and pressure exerted on the mould

increases. H75-AT is mixed with the B component Type II and is resistant to

diluted acids, bases and water.

Area of application

Hard and shapeable components with a non porous surface:

- Lids

- Shells

- Reliefs

- Figures

- Decorative parts

- Filling material for use in taxidermy

- Models

- Components for precision castings

Characteristics




Colour: yellowish

>

>

>


126.315 0,7 kg

126.316 3,5 kg

126.302 10,0 kg

126.322 200,0 kg


Description

H200-AT is a CFC free, closed cell, 2 component hard foam. It cures to a

non porous surface when poured into a mould. The foam has a cup density

of ca. 200 kg/m³, good mechanical strength and can be nailed or screwed.

It can be mixed and poured by hand as it has a long start time. Mechanical

stirring reduces the density and start time. A large amount poured into a

closed mould increases the density and the pressure exerted against the

mould. H200-AT is used with the B component Type II and is resistant to

diluted acids, bases and water.

Area of application

Shapeable components subject to high stress and a non porous surface:

- Lids

- Doors

- Arm chair shells

- Casings for machine and other apparatus

- Car body parts

- Models

Characteristics




Colour: yellowish

>

>

>


126.339 1,0 kg

126.340 10,0 kg

126.323 200,0 kg

POLYURETHANE:

3939


Description

H400-AT is a CFC free, closed cell, 2 component hard foam that cures to a

non porous surface when poured into a mould. The foam has a cup density

of ca. 400 kg/m³ and very good mechanical strength. Due to its long reaction

time it can be mixed and poured by hand easily. Mechanical stirring reduces

the density and start time. A large amount poured into a closed mould

increases the density and the pressure exerted against the mould. H400-AT

is used with the B component Type II and is resistant to diluted acids, bases

and water.

Area of application

Mechanically shapeable components with a non porous surface that can be

subjected to high stress:

- Orthopaedic components

- Lids

- Doors

- Arm chair shells

- Casing for apparatus

Characteristics




Colour: yellowish

>

>

>


126.364 1,0 kg

126.365 10,0 kg

126.295 200,0 kg

H 40 B2Polyurethane cavity filling and insulating

foam Description

H 40 B2 is a CFC free, closed cell, 2 component hard foam based on poly-

urethane. The foam is used to fill cavities, to produce large fibre resin struc-

tures e.g. for refrigerated storage houses. The strength of the insulation is

about 20-170 mm. The foam is certified B2 as a building material according

to DIN 4102 (normally inflammable).

H 40 B2 is mixed with the B component Type II.

Area of application

Closed cell foam components and cavity filling:

- Thermal insulation

- Deep freeze insulation

- Insulation to reduce sound

- Filling cavities

- Large fibre resin structures

Characteristics




Colour: yellowish

>

>

>


139.856 5,0 kg

139.855 200,0 kg

POLYURETHANE:

40

WR-ATPolyurethane elastic and soft foam

Description

WR-AT is a CFC free, elastic, 2 component, soft, open cell polyurethane

foam. It has a cup density of ca. 55 kg/m³, a short reaction period and is

mainly mixed and poured by machine. The foam is processed by hand only

in small quantities. WR-AT is resistant to diluted acids and bases.

Area of application

Soft and elastic components and fillings:

- Light weight cushions

- Padding

- Headrests

- Sound insulation

- Shock absorbing parts

Characteristics




Colour: yellowish

>

>

>


126.282 A-component / 200,0 kg

126.283 B-component / 250,0 kg

ZR-ATPolyurethane elastic foam

Description

ZR-AT is a CFC free, open cell, elastic yet tough 2 component foam. It has a

cup density of ca. 60 kg/m³, a short reaction period and is mainly processed

by mechanical stirring. The foam is only mixed by hand in small quantities.

ZR-AT is used with the ZR B component and is resistant to diluted acids and

bases.

ZR B component contains toluylene diisocyanate (TDI).

Area of application

Elastic, tough components with a higher compressive strength:

- Elastic parts (without a skin)

- Harder, more stressed parts for the upholstery industry

- Sound insulation

- Shock absorbing parts

Characteristics




Colour: yellowish

Processing equipment

CAUTION! POISONOUS! This product is for industrial use only.

>

>

>

>




POLYURETHANE:

4141

Flexovoss K6S & K6TPolyurethane casting, coating and moul-

ding material Description

K6 is a two component, self levelling (S) or thixotropic (T) product. It is ela-

stic (65 % elongation at break), has good resistance to diluted acids, bases

and water. K6 does not contain plasticizer.

The B component is K6 S-T-H. It cures with low shrinkage and can be used

down to -20°C when cured.

Area of application

Tough, elastic casting material:

- Electronic encapsulation

- Machine parts

Coating of:

- Polystyrene and PUR foam

- Wood (with G4 primer)

- Metal (with G4 primer)

- Concrete (with G4 primer)

- Thermoplastics (restricted)

- Glass fibre plastics

Tough, elastic moulds for:

- Ready mixed concrete

- Concrete plates

Characteristics



Mixing ratio A:B = 100:25 parts by weight with K6 S-T-H B comp.

Colour: grey/beige


K6 is applied with a brush or wool roller, K6S with a spray gun, using brea-

thing protection.

>

>

>

>


126.440 K6-S / 1,0 kg incl. hardener



126.455 K6-T / 1,0 kg incl. hardener



SOLID SYSTEMS - CASTING SYSTEMS

Flexovoss K6HPolyurethane coat

Description

K6H is a 2 component thixotropic product. It cures with minimal shrinkage,

has a high chemical resistance (fuel oil, diesel) and does not contain plas-

ticizer. The B component K6 S-T-H is used. K6H is applied with a brush or

wool roller.

Area of application

Fuel oil resistant coating for:

- Fuel oil and diesel tanks of steel, aluminium (restricted) and GRP (additional

inside coating)

- Collecting trays for environment protection purposes

Characteristics

Amount used: 1.6 kg/m² for 2 coats


Mixing ratio A:B = 100:25 parts by weight with K6 S-T-H B comp.

Colour: grey

>

>

>





POLYURETHANE:

42

Flexovoss K7Polyurethane casting and coating material

Description

K7 is a two component, self levelling, high abrasion and impact resistant

product with a tough surface. It is resistant to diluted acids, bases, water,

mineral oil and does not contain plasticizer.

K7 is cured with K7 B component and applied with a brush or wool roller.

Area of application

Highly abrasion resistant parts:

- Core models for sand casting

Coating:

- Metal (with G4 primer)

- Wood (with G4 primer)

- Concrete (with G4 primer)

- Polystyrene foam

Characteristics

Amount used: 1.8 kg/m²



Colour: red brown

>

>

>





Flexovoss K9 NPolyurethane mould and casting material

Description

K9 N is a permanent elastic (ca. 100 % elongation at break), low shrinkage,

two component casting compound that contains plasticizer. It is cured with

K9 N B component and is resistant to water, diluted acids and bases.

Area of application

Elastic patterns and moulds for:

- Exposed concrete cladding

- Concrete parts

- Casting polyurethane and polyester (small production runs)

Characteristics




Colour: grey

>

>

>





Flexovoss K10Polyurethane mould and casting substance

Description

K10 is a modified, two component, self levelling casting material with little

shrinkage and good dimensional stability. It is resistant to water, diluted

acids and bases. K10 is cured with K10 B component.

For industrial use only.

Area of application

Moulds and cores that are extremely resistant to bases:

- Patterns for exposed concrete parts

- Elastic moulds for concrete sections

Characteristics




Colour: yellow

>

>

>



POLYURETHANE:

4343

Flexovoss K 14Polyurethane mould and casting

compound Description

K14 is a solvent free, two component mould and casting compound based

on polyurethane which has a short potlife, a short mould release time and a

reduced curing period. K14 contains light weight filling materials. Therefore

the handling characteristics of the hardened material are similar to hard-

wood. The product is used with the B component Type II.

Area of application

- Production of medium sized moulds, suitable for serial production

- Casting of light weight parts

Characteristics

Potlife: ca. 8 minutes at 20°C

Specific gravity: A-comp. 0.8 kg/l; B-comp. 1.22 kg/l


Cures with: B component Type II

Colour: yellowish

>

>

>


142.366 5,0 kg

143.498 15,0 kg

Elastocoat C 6698/50

Description

C 6698/50 is a two component mould and casting polyurethane resin for

hand and automatic applications. The product does not contain plasticizers

and solvents. The hardened material is very elastic (300% elongation at

break). It is cured with C 6698 B-component and is resistant to water, diluted

acids and bases.

Area of application



- Elastic concrete mould parts

- Mould parts

Characteristics




Cures with: Elastocoat C 6698 B-component

Colour: ivory

>

>

>


126.507 5,0 kg

126.508 30,0 kg

126.417 200,0 kg

POLYURETHANE:

44

Elastocoat C 6698/70

Description

C 6698/70 is a two component mould and casting polyurethane resin for

hand and automatic applications. The product does not contain plasticizer

and solvent. The hardened material is very elastic (200% elongation at

break). Compared to C 6698/50 it is slightly harder and has a Shore-A hard-

ness of 70. It is cured with C 6698 B-component and is resistant to water,

diluted acids and bases.

Area of application



- Elastic moulds for concrete sections

- Mould parts

Characteristics




Cures with: Elastocoat C 6698 B-component

Colour: ivory

>

>

>


126.425 5,0 kg

126.426 30,0 kg

126.419 200,0 kg

Elastocoat C 6698B-component

Description

C 6698 B-component is a prepolymer based on diphenylmethane-diiso-

cyanate (MDI) and is used to cure the two component mould and casting

polyurethane resins C 6698/50 and C 6698/70.

For optimum results and to prevent free poly parts in the cured product, the

mixing ratio must be followed exactly.

>


126.504 1,0 kg

126.505 5,0 kg

126.506 30,0 kg

Elastocoat C 6770/1

Description

C 6770/1 is a two component polyurethane system. It is used for coatings

and hard components or rigid moulds, for producing polyurethane or epoxy

castings. Due to its long working time and slow cure speed it is suitable for

processing by hand and cures, even in thick layers, with little heat and low

shrinkage. It is easy to use as it has a low viscosity. C 6770/1 cures at room

temperature with the B component Type II.

Characteristics



Mixing ratio: 100:90 parts by weight

Colour: yellow

>

>


141.385 5,0 kg

141.386 30,0 kg

141.389 200,0 kg

POLYURETHANE:

4545

Elastocoat C 6781

Description

C 6781 is a two component casting system based on polyurethane that con-

tains filling materials. The product does not contain solvents or plasticizers.

When cured it is permanently elastic (elongation at break ca. 30 %) and is re-

sistant to diluted acids, bases and water. C 6781 cures at room temperature

with the B component Type II.

Area of application

Tough, elastic mouldings:

- Electronic encapsulation

- Small parts and signalling devices for switches and tracks in the railway

industry

Characteristics




Colour: black

>

>

>


126.746 5,0 kg

126.747 30,0 kg

126.397 200,0 kg

Elastocoat C 6782

Description

C 6782 is a two component, polyurethane based, solvent free casting

system that contains filling materials. It has a medium viscosity, a very short

potlife and is easy to use. It cures fast and can often be demoulded within

an hour. This makes C 6782 suitable for mass production. When cured, it

has a Shore D hardness of 70, is resistant to dilute acids, bases and water. C

6782 cures at room temperature with the B component Type II.

Area of application

- Hard casting material for encapsulation of electronic components

- Production of tough and hard components

Characteristics


Potlife: ca 4-7 minutes


Colour: beige brown

>

>

>


126.744 5,0 kg

126.745 30,0 kg

126.390 200,0 kg

B Component Type IIPolyurethane B component

Description

B component Type II contains diphenylmethane-4.4’-diisocyanate (MDI)

and is used to cure 2 component polyurethane foams and systems. It is

important to work according to the mixing ratio given on the matching A

component to obtain the product properties and to prevent free isocyanate

or polyol particles in the cured product.

Area of application

To harden 2 comp. polyurethane foams:

- Unizell HR-AT / HR77-AT / H 40 B2



2 comp. polyurethane systems:

- Elastocoat C6770/1

- Elastocoat C6781

- Elastocoat C6782

- Flexovoss K14

Characteristics

Colour: brown

>

>

>


126.309 1,0 kg

126.310 5,0 kg

126.311 10,0 kg

126.313 200,0 kg

POLYURETHANE:

46

Elastocoat C 6905

Description

C 6905 is a two component casting system based on polyurethane. It

contains no fillers, solvents or plasticizers. Permanently elastic parts (elon-

gation at break ca. 100 %) with a medium Shore A hardness of 55, can be

used even at low temperatures down to -40°C. It can be used to fill narrow

cavities because of its low viscosity (ca. 700 mPa.s). When cured C 6905

is resistant to diluted acids, bases and water. It is cured with the C 6905 B

component at room temperature.

Area of application

Elastic bonding of:

- Polyurethane foam

- A range of plastics (not PE or similar)

- Wood, metal (with G4 primer)

Flexible mould for:

- Polyurethane and epoxy

- The ceramic industry

Production of elastic components

Characteristics




Colour: beige

>

>

>








G4Bonding primer and sealer

Description

G4 is a 1 component polyurethane that cross links chemically after the

solvent has evaporated. The product has good abrasion resistance, high

chemical resistance which includes many waste products, is a tough binding

material and primer coat.

It bonds exceptionally well and has good scratch resistance. It improves

the adhesive strength of GRP coatings. G4 yellows under UV light. With dry

quartz sand or sawdust, G4 can be used as a binding material for repairs.

Area of application

-Adhesive primer for GRP or PUR on: wood, concrete, stone, steel, glass

(restricted)

- Sealant or primer sealer for: wood, concrete, cement, plaster, clay

- Binding agent for: thin layers of resin mortar and wood dust

Characteristics

Amount used: at least 200 ml/m²

Colour: transparent brown


G4 is applied with a brush, wool roller or spray gun (using fresh air respira-

tory protection). For spray application and to improve penetration into the

substrate, G4 can be used with Polyurethane Thinners.

>

>

>

>


126.406 1,0 l

126.407 5,0 l

126.408 10,0 l

126.409 30,0 l

126.410 200,0 l

SOLID SYSTEMS - COATING SYSTEMS

POLYURETHANE:

4747

G8 SuperClear coating

Description

G8 Super is a good weathering one component, moisture cured polyuretha-

ne clear coating that does not yellow. It has very good resistance to many

chemicals.

Area of application

Abrasion and UV resistant clear coating for: wood, concrete, metal, epoxy

and polyester laminates

Characteristics

Amount per coat: 200-300 ml/m² - depending on porosity

Colour: clear


G8 Super is applied with a brush, wool roller or spray gun (with fresh air

breathing protection). Polyurethane thinners can be used to improve the flow

and penetration of G8 Super.

>

>

>

>


126.421 1,0 l

126.422 5,0 l

126.423 10,0 l

126.424 200,0 l

Estovoss Standard

Description

Estovoss Standard ia a one component polyurethane that has good ab-

rasion and very good chemical resistance (also when used for agricultural

purposes). It turns slightly yellow when exposed to UV light. The material is

resistant to diluted acids, bases, water, grease and oil at room temperature.

The solvents evaporate and Estovoss is moisture cured.

After priming with G4 and an interval of 2 to 4 hours, a thin layer of Estovoss

Standard is applied twice with a brush or wool roller.

Area of application

A coat that bonds well, is tough, has good chemical resistance, for indoor

concrete and cement floors:

- Garages

- Cellars

- Storage and manufacturing halls

- Stables

Characteristics

Amount per coat: 300-350 ml/m² (2 coatings)

Colour: grey

>

>

>


126.375 1,0 l

126.376 5,0 l

126.377 10,0 l

126.378 30,0 kg

POLYURETHANE:

48

Estovoss Super

Description

Estovoss Super is a one component polyurethane sealant which has good

abrasion, chemical and UV resistance (also when used for agricultural

purposes). It is resistant to diluted acids, bases, grease, oils and water.

When the solvents have evaporated it cures with moisture. After priming with

G4 and an interval of 2 to 4 hours, a thin layer of Estovoss Super is applied

twice with a brush or wool roller.

Area of application

A coating that bonds well, has a good chemical, UV and abrasive resistance,

for indoor and outdoor use:

- Garages, cellars, hobby rooms

- Storage and manufacturing halls

- Transportation silos

- Feeding troughs

Characteristics

Amount used: 300-350 ml/m² (2 coatings)

Colour: grey, pebble grey (green and sand yellow on request)

>

>

>


126.367 grey / 1,0 l

126.368 grey / 5,0 l

126.369 grey / 10,0 l

126.370 grey / 30,0 kg

126.371 green / 5,0 l

126.468 pebble grey / 5,0 l

126.469 pebble grey / 30,0 kg

126.513 sand yellow / 5,0 l

126.514 sand yellow / 30,0 kg

Polyurethane ThinnerThinner and cleaning agent

Description

Polyurethane Thinner is used for G4 and G8 Super. It improves the flow and

penetration of G4/G8 Super coatings. Polyurethane Thinners is also used as

a cleaning agent for tools used to apply these materials.

Area of application

Thinner or equipment cleaner for: G4 or G8 Super

Characteristics

Amount to add:

- G4 up to 200 %

- G8 Super up to 50 %

- Estovoss Standard and Super up to 10 %

Colour: clear

>

>

>


126.380 0,5 l

126.381 1,0 l

126.382 5,0 l

126.384 10,0 l

126.383 200,0 l

ADDITIVES PU

POLYURETHANE:

4949

PUR Accelerator

Description

PUR-Accelerator is used to increase the rate of reaction of several Flexovoss

products. It is added to the A and B component mixture shortly before it is

mixed.

For industrial use only.

Area of application

Reduces the potlife, the mould release time and the curing period:

- Flexovoss K6S & K6T

- Flexovoss K6H

- Flexovoss K7

- Flexovoss K9N

- Flexovoss K10

- Flexovoss K14

- and Elastocoat products

Characteristics

Amount to add: 0.1-0.5 % (0.15 % halves the potlife)

Colour: clear

>

>

>


126.594 1,0 l

POLYURETHANE:

EPOXY:

EPOXY

Mechanical and Electrical Properties

EP resins provide a high adhesive strength to the reinforcement fibres and a minimal shrinkage.

Reinforced moulding materials have good residual strength even when subject to oscillatory stress.

The mechanical properties strongly depend upon the fibre content, the fibre direction and the type of

fibre. Depending on their structure the materials range from stiff to elastic, very tough, hard, abrasion

resistant, dimensionally and heat stable. Very good insulating properties.

Epoxy resins are available as casting, coating and laminating resins, moulding material or as pre-

pregs (woven fibres pre-impregnated with resin). The resins are used for the following purposes:

Moulded components with E-glass, R-glass, aramide, carbon, and boron fibres; coatings with and

without glass fibre reinforcements for protection against corrosion; moulding material with glass fibre

reinforcements and metal inlays; polymer concrete for components that have a chemical resistance;

polymer cement based floors as a wear resistant surface coat; casting, saturating and embedding

resins for the electronic field; lacquer resins (thermoplasts and duroplasts); bonding resins.

Chemical Resistance

Epoxies generally have a better resistance to alkaline solutions than polyester resins. They are also,

depending on type, resistant to a range of acids and chemicals such as styrene, xylene, gasoline,

white spirit, petroleum, diesel and fuel oil.

Processing

EP resins can be processed by cold curing or hot curing. When cured with heat they clearly develop

better mechanical properties. Cold curing occurs with the casting of construction parts, the hand

lay-up and vacuum processes. Pre-impregnated woven fibres (40 to 60% glass content) are pro-

cessed to high strength moulded components on a press machine under vacuum or in autoclaves.

Hollow parts are produced in the filament winding process with pre-impregnated rovings of glass,

aramide or carbon fibres. Glass fibre EP parts can be shaped, bonded and will take screws. In a

cured state the material is physically harmless in practical terms.

Application

• Casting of electrical and electronic components:

Parts for electric motors; insulators; high voltage bearings. Base panels for electronic switches.

• Vehicle construction:

Gliders and power gliders; building components and panelling for large aeroplanes (sandwich

construction). Structural parts for UL (ultra light) aeroplanes; covers subject to heat exposure;

bonnets and spoilers on sports cars; panels for racing cars; racing yachts and boats, surfboards,

high performance masts, surf masts, wishbooms, bonding wood on modern boats, racing bikes,

tennis racquets.

• Tool construction:

Casting models, master forms, moulds, deep drawn tools, foam moulds, tools for injection moul-

ding.

• Building industry:

Reconstruction and bonding of concrete parts, surface protection, cement based composition

floors.

54

Epoxy BKEpoxy laminating, casting and binding resin

Description

BK is a low viscosity (ca. 1000 mPa.s), solvent free epoxy resin that can be

processed at room temperature and hardens tack free. It can be used as

coating, casting and laminating resin and as a binding agent. The resin is

cured with BK hardener (amine) and can be used with glass, carbon or kevlar

fibre in the hand lay-up process.

Area of application

An all purpose epoxy resin for laminating, casting and binding:

- Moisture resistant coating for gutters, pipes and tanks made of concrete

and other materials

- Encapsulation of electronic wiring

- Laminating resin for model construction, for panels and bonnets

in the vehicle and apparatus industry

- For wood repairs as a binder for fillers or adhesives

- Binder for sand mixtures used to repair floors

- Binder for light weight filling materials that are used as base and fine filler

Characteristics

Amount used: 3x mat, 1x woven fabric weight; 1.1 kg/l



Cures with: BK hardener

Colour: transparent

>

>

>






LAMINATING & CASTING

Epoxy BNEpoxy coating and casting compound

Description

BN is a cold curing, slightly filled epoxy resin that can be processed at room

temperature and hardens to a tack free surface. It is of medium viscosity

(2700 mPa.s) and contains no solvents. BN is suitable as a coating and

casting compound for parts subject to higher stress.

Area of application

Coating and casting compound:

- Water proof coating on porous and flat surfaces e.g. gutters, pipes,

concrete, steel tanks etc.

- Casting compound for cracks or defects in concrete and other materials

- Encapsulation of electronic wiring

Characteristics




Cures with: BN hardener

Colour: light grey

>

>

>






EPOXY:

5555

Epoxy LN-1Epoxy laminating, casting and binding resin

Description

LN-1 is a cold curing, solvent free, low viscosity (1200 mPa.s) laminating

resin. The resin processes very good mechanical strength, and has a high

heat and chemical resistance. It is cured with the LN-1 hardener (amine) and

does not harden tack free. LN-1 has good saturating and wetting qualities

and can be used with glass, carbon and kevlar fibres. LN-1 is also applied as

a saturating and bonding resin for wood.

Area of application

Glass fibre reinforced parts and laminates that are subject to higher mecha-

nical, heat and chemical conditions. Bonding and saturating resins for wood.

Characteristics



Cures with: LN-1 hardener

Colour: transparent

>

>

>






Epolit CK Epoxy laminating, casting and binding resin

Description

Epolit CK is a solvent free, low viscosity bisphenol A resin with reactive

diluent, which is especially used as a chemical resistance coating and as a

casting compound.

Area of application

Epolit CK is used as binder for sand mixtures and in connection with light

filler material for normal requirements. The cured surface is highly UV light

resistant.

Epolit CK can be used with glass, carbon or kevlar fibre in the hand lay-up

process. It is also applied as a casting, saturating and bonding resin.

>

>


143.785 Epolit CK / 200 kg

143.974 Epolit CK / 1000 kg

143.984 Epocur CK MI / 25 kg

143.983 Epocur CK MI / 200 kg

EPOXY:

56

Epolit UNEpoxy laminating, casting and binding resin

Description

Epolit UN is a universal, low viscosity, solvent free bisphenol A/F resin with

reactive diluent and high crystallization stability. It can be used as a lamina-

ting, casting, saturating and bonding resin.

Area of application

The laminating system with the hardener Epocur UN SC for all-purpose

applications is used for manufacturing composites for boats, pipes and

containers and for repairing GRP parts. The laminate strengths achieve

their final properties by storing at room temperature after 4-6 days. A higher

mechanical resistance can be achieved after post curing the laminates.

The laminating system with the hardener Epocur UN MI has an extended

potlife (gel time > 8 h) and due to its low viscosity it is recommended for

injection methods e.g. for large laminates and in parts for the construction

industry. The post curing of the laminates is recommended.

The system with the hardener Epocur UN LA has a very long potlife and is

used especially in areas with warmer climate and for sewage renovation.

Larger batch sizes can be processed.

>

>


143.783 Epolit UN / 200 kg

143.976 Epolit UN / 1000 kg

143.986 Epocur UN LA / 25 kg

143.985 Epocur UN LA / 200 kg

143.988 Epocur UN MI / 25 kg

143.987 Epocur UN MI / 200 kg

143.992 Epocur UN SC / 25 kg

143.991 Epocur UN SC / 200 kg

Epolit OVEpoxy laminating, casting and binding resin

Description

Epolit OV is a solvent free bisphenol A resin with reactive diluent and redu-

ced crystallization tendency. The hardeners Epocur OV SC and Epocur OV

LA are liquid at room temperature, uncoloured to light yellow polyamines.

The hardener Epocur OV LA is suitable for formulation of laminating systems

with a low exothermic reaction and a long potlife.

The fast curing hardener Epocur OV SC can be mixed with the slow curing

hardener Epocur OV LA in any desired ratio. This allows adjusting the potlife,

the curing process and the viscosity of the material, without changing the

mixing ratio of resin and hardener. This system is approved according to

Germanischer Lloyd.

Area of application

Epolit OV with the hardeners Epocur OV SC and Epocur OV LA are lamina-

ting systems which are preferably used for manufacturing rotor blades for

wind power stations, producing high strength reinforced mould components

and composites in the boat building, pipe and container building industry.

>

>


143.784 Epolit OV / 200 kg

143.975 Epolit OV / 1000 kg

143.978 Epocur OV LA / 25 kg

143.977 Epocur OV LA / 200 kg

143.980 Epocur OV SC / 25 kg

143.979 Epocur OV SC / 200 kg

EPOXY:

5757

GlosscoatEpoxy coating resin

Description

Glosscoat is a cold curing, solvent free, transparent, easy flowing resin.

It is cured with Glosscoat hardener. Decorative pictures, collages and

coatings with a smooth, high gloss surface can be made. The colours can be

separated by wire inlays (similar to lead borders) or allowed to flow into one

another. A coating of Glosscoat enhances the effect of wood grain.

Area of application

- Decorative coatings, collages on wood and other materials

- High gloss, transparent coats on various materials e.g. wood, plastics,

metals etc.

Characteristics




Colour: transparent yellow

>

>

>




COATINGS

Speedcoat SCEpoxy coat

Description

Speedcoat SC is a cold curing, thixotropic, solvent free, high gloss gelcoat

and topcoat used to level surfaces of finely woven mat (viscosity 4700 mPa.

s). It is cured with Speedcoat hardener and applied by means of the hand

lay-up process. SC can be coloured with EP pigment pastes. If necessary, a

light stable PUR lacquer can be used as the last layer.

Area of application

High gloss, long wearing gelcoat or topcoat for:

- Custom made boards

- Negative glass fibre epoxy resin moulds

- Final coat for wooden boats built by means of the epoxy wood bonding

method that need to be coated with a lacquer

- Steel moulds for artificial stone production

Characteristics



Mixing ratio: 100:40

Colour: transparent

>

>

>




EPOXY:

SILICONE:

SILICONE

Properties

The one component silicone cures with air moisture to a permanent elastic sealant. Two component

silicone rubbers are used as moulding and coating compounds. The material has a low shrinkage,

medium mechanical strength, high heat resistance (over 300°C for a short period without great

change in the mechanical properties), long processing and curing times, is physically harmless in

practical terms (excluding some hardeners) and has good electrical insulation ability. Very accurate

and flexible moulds are produced with 2 comp. silicone. The material has a high elasticity and one

piece moulds can often be made where two piece moulds would usually be necessary. Objects with

undercuts can also be reproduced. Silicone is self releasing from many materials.

Solutions prevent water penetration, but still allow vapour transmission.

Silicone rubber has high elasticity which makes it a useful material for many applications. One com-

ponent silicones adhere well to many substrates, two component silicones have good self releasing

properties from many materials.

Processing

Silicone rubbers are processed by casting, brushing or spraying. The solutions are applied by spray,

roller or brush.

Application

Mould material: elastic moulds with a high tear resistance for reproducing components. For machine

construction, automobile engineering, manufacture of decorative parts, prototypes and sculptures.

Precision mechanics: a sealant with high heat and water resistance.

Electronic field: casting compound for electronic encapsulation, laminated sheets for electronic

parts.

Car body production, sanitary areas, joints in construction: permanently elastic sealant that has a

high heat resistance and inhibits fungal growth.

Silicones are resistant to: diluted mineral acids and bases, glycol, sea water, methanol. They are not

resistant to: concentrated acids and bases, aromatic hydrocarbons and most solvents.

62

Sicovoss NLSilicone mould and casting material

Description

NL is an elastic mould and casting material that is self releasing from many

materials. It cures at room temperature after adding the NL curing agent.

With a low shrinkage it is used for reproducing complicated surfaces with

slight undercuts. After several uses a release agent is advised. NL may be

used to cast: polyester resin, casting Wood, polyurethane, plaster and wax.

Area of application

Moulds for parts with a complicated surface structure and slight undercuts

and as a casting compound:

- Furniture decorations

- Reliefs (coins, coats of arms)

- Decorative pieces

- Candles

- Jewellery figures

- Model toys

- Small production runs

Characteristics


Potlife: 90-120 min.

Cures with: 5 % NL curing agent

Colour: blue

>

>

>






Sicovoss RFHigh strength silicone mould material

Description

RF is a tear resistant, highly elastic mould and casting material (600 % elon-

gation at break) and is self releasing from many materials. It cures at room

temperature after adding the RF curing agent. This low shrinkage silicone

rubber (0.2-0.5 % linear shrinkage) is used for moulding deeply undercut

parts. RF moulds can be subjected to high stress, they have excellent tear

resistance and stability. As the material has a high elasticity, one part moulds

are often made instead of two part moulds. If the mould is repeatedly used

a release agent is recommended. RF can be thickened with Silastic Thixo

Additive so that it does not drain on vertical surfaces or ceilings.

RF can be used to cast: polyurethane casting materials, polyurethane foams,

polyester resin, casting wood, concrete, wax and plaster.

Area of application

Moulds and parts with very complex shapes and deep undercuts:

- Figures (seamless one part moulds)

- Decorative and construction elements

- Candles

- Garden ornaments

- Model toys

Characteristics



Cures with: 5 % RF curing agent

Colour: white

>

>

>






SILICONE:

6363

Silastic ® 3133 All purpose silicone mould material

Description

Silastic® 3133 is an easy to use silicone mould making rubber. It is de-airing

and cures at room temperature after adding Silastic® 81-NW curing agent

and has a low shrinkage (0.2-0.4 % linear shrinkage). It is self releasing from

many materials. It has a low hardness and high elasticity which allows easy

removal of parts even those with undercuts. If the mould is used repeatedly

a release agent is advised. Moulds made from Silastic® 3133 can be used

to cast polyester resins, polyurethane casting materials and foams, plaster

and wax.

Area of application

Moulds for the reproduction of parts with complex shapes and undercuts:

- Reliefs

- Figures

- Model toys

- Decorative parts

Characteristics



Cures with: 5 % curing agent Silastic® 81-NW

Colour: pale blue

>

>

>


125.914 Silastic 3133 / 5,0 kg

143.036 Silastic 81-NW Curing Agent / 0,25 kg

SILICONE:

64

Silastic ® 3481High strength silicone mould material

Description

Silastic® 3481 is a highly elastic silicone mould making rubber (600 %

elongation at break) with high tear strength for industrial purposes. The

casting material has a low shrinkage (0.2-0.4 linear shrinkage), is self

releasing from many materials and cures at room temperature. The moulds

provide excellent reproduction of finely detailed parts that have a complica-

ted surface pattern and deep undercuts. Silastic® 3481 has very good tear

resistance (and notch resistance). As the material has a high elongation, one

piece moulds can often be made where two piece moulds would usually be

necessary. It can be thickened by adding Silastic® Thixo Additive so that

it does not drain on vertical surfaces. If the mould is used repeatedly use a

release agent. Moulds made from Silastic® 3481 can be used to cast poly-

ester resin, polyurethane casting materials and foams, casting wood, epoxy

resins, plaster, wax and concrete.

Several curing agents can be used:

- Silastic® 81 NW – standard curing agent

- Silastic® 81-R NW – especially used for casting polyester resins

- Silastic® 81-F NW – fast hardener, potlife 30-45 min., cure time 5 hrs

- Silastic® 81-VF NW – very fast hardener, potlife 8-10 min., cure time 90 min.

Area of application

Elastic, high tear resistant moulds for parts that have a difficult shape and

deep undercuts. Suitable for mass production:


- Figures (seamless moulds)

- Statues and pillars

- Candles

- Model toys

Characteristics


Potlife: 90-120 min. with Silastic® 81

Curing agents: 5 % Silastic® 81 NW, 81-R NW, 81-F NW, 81-VF NW

Colour: white

>

>

>


125.964 Silastic 3481 / 5,0 kg

125.965 Silastic 3481 / 20,0 kg


143.037 Silastic 81 NW Curing Agent / 1,0 kg


143.042 Silastic 81-R NW Curing Agent / 0,25 kg



143.039 Silastic 81-F NW Curing Agent / 0,25 kg



SILICONE:

6565

Silastic ® 3483High strength silicone mould material

Description

Silastic® 3483 is a high strength silicone rubber. It has a low shrinkage and

is self releasing from many materials. The low hardness (Shore A 13) and the

high tear strength (elongation at break 600 %) allow easy release, even of

complex parts with deep undercuts. With Silastic® 3483 a one piece mould

can often be made where two piece moulds would usually be necessary.

It can be thickened with Silastic® Thixo Additive to make it brushable, so

that it does not drain on vertical surfaces. If the mould is used repeatedly a

release agent is recommended. Moulds made from Silastic® 3483 can be

used to cast: polyester resins, polyurethane casting materials and foams,

casting wood, epoxy resins, plaster and wax.

Area of application

High tear strength and elastic moulds for parts with a complicated surface

structure and deep undercuts. Suitable for mass production:


- Figures (seamless moulds)

- Statues and pillars

- Candles

- Model toys

Characteristics



Curing agent: 5 % Silastic® 83 NW

Colour: white

>

>

>


125.709 Silastic 3483 / 5,0 kg

125.715 Silastic 3483 / 20,0 kg

126.001 Silastic 3483 / 200,0 kg




Silastic ® 3496 / 3497 / 3498High strength silicone mould material

Description

The materials are high strengh, elastic silicones which are formulated to

have an improved mould life for polyester resins. They have an outstanding

release and high tear resistance for accurate moulds of parts with complex

shapes and deep undercuts. In combination with the curing agents these

silicone rubbers achieve different viscosities, processing times as well as

degrees of hardness.

Characteristics


Curing agent: 5 %

Colour: white

>

>


136.833 Silastic 3496 / 20,0 kg

136.834 Silastic 3497 / 20,0 kg

136.835 Silastic 3498 / 20,0 kg










SILICONE:

66

Silastic ® M

Description

Silastic ® M is suited for the reproduction of prototyping, architectural

and furniture components, especially for use with polyurethanes and other

casting plastics. It has a high degree of hardness and a high inhibition resi-

stance. It can be used for high temperature casting applications.

Characteristics


Potlife: 60 minutes

Curing agent: 10 % hardener

Colour: blue

>

>


138.802 Silastic M / 4,0 kg

138.803 Silastic M Curing Agent / 0,4 kg

Silastic ® P-1

Description

Silastic ® P-1 is a high tear resistant and low viscosity silicone rubber

(13500 mPa.s). It has a very high elongation at break (850%) and cures at

room temperature with 10 % curing agent, practically shrinkage free. If the

mould is used repeatedly a release agent is recommended.

Characteristics




Colour: white

>

>



Silastic ® SSilicone Mould Material

Description

Silastic ® S is a high strength, very low viscosity silicone rubber (10000

mPa.s). It is very soft (25 Shore A) and has a very high elongation at break

(750 %). It cures at room temperature with 10 % curing agent S, practically

shrinkage free. Moulds made from Silastic ® S have a long mould life even

at temperatures of up to 200°C. If the mould has a high repeat usage a

release agent is recommended. Silastic ® S can be used to cast concrete,

many casting resins, very suitable for the ceramic industry.

Area of application

Accurate moulds for industrial application and moulding of figures:

- Moulding concrete

- Prototypes

- Complicated technical models

- Ceramic industry

Characteristics


Potlife: 30-90 min.

Curing agent: 10 % hardener S

Colour: green

>

>

>





SILICONE:

6767

Silastic ® S-2

Description

Silastic ® S-2 silicone rubber is suited for detailed reproduction of surfaces

and objects, particularly suited for reproductions in plaster, polyurethane and

concrete. It hardens rapidly at room temperature, even when applied in thick

coats.

Characteristics


Potlife: 60 minutes


Colour: white

>

>



Silastic ® T-2

Description

Silastic ® T-2 is a translucent silicone mould making rubber with a low

viscosity and a high degree of hardness (shore A 40). It is used for making

accurate moulds for prototype design and small production runs. T-2 is also

suitable for artistic and renovation applications.

T-2 cures at room temperature with 10% curing agent, practically shrinkage

free. Although the silicone has good flow properties, entrapped air can affect

the translucency of the cured silicone. Entrapped air should be removed

in a vacuum chamber. The translucency allows cutting a one piece mould

without damaging the original part. T-2 is self releasing from many materials.

If the mould is used repeatedly a release agent is recommended.

Characteristics




Colour: translucent

>

>




SILICONE:

CLEANING, CARE &

RELEASE AGENTS

:

70

Formula Five Cleaner

Description

Formula Five ® Cleaner is a polishing agent, which extends the service life

of the mould. It removes fine scratches and provides a high gloss surface for

the application of the release wax. It is recommended to use Formula Five ®

Cleaner in combination with Formula Five ® Wax.

Area of application

Cleans and polishes:

- Moulds treated with Formula Five ® Wax

- Moulds coated with other release waxes

Characteristics

Amount used: ca. 15 g/m²

Colour: clear

>

>

>


125.614 950 ml

CLEANING

TR-210Self Stripping

Description

A liquid release wax to reduce and minimize styrene and release wax build-

up or accumulation.

Area of application

- Easy to apply, cleans and releases in one easy step

- Fast drying

- Restores gloss appearance

- Ideal for detailed or non-skid type moulds

- Improves production cycles and mould maintenance

Characteristics

Amount used: ca. 200 ml/m²

Colour: transparent

>

>

>


125.629 3,785 l

TR-905Solvent Mold Prep Cleaner

Description

TR-905 is a mixture of solvents. It removes wax, oil and other contaminates

from GRP tools and hard mould surfaces.

Area of application

TR-905 is applied with a clean cotton cloth (do not use blended fabrics)

onto the dry mould surface. The surface must stay wet during application to

ensure that the residues of the release agent are thoroughly removed.

>

>


137.637 3,785 l

CLEANING, CARE & RELEASE AGENTS:

7171

M-50Polishing paste

Description

M-50 is a medium fine, strong polishing paste for reinforced polyester and

epoxy resin moulds. After wet sanding, M-50 is applied with a polishing

machine achieving a good first glazed finish.

Area of application

Removes wet sanding marks on GRP mould surfaces

Characteristics

Amount used: depends on condition

Colour: white

>

>

>


126.085 1,0 kg

CARE & POLISHING

M-100Polishing paste

Description

M-100 is a fine, abrasive polishing paste applied by machine on moulds after

using M-50, or separately. Achieves a deep glazed finish.

Area of application

Restores and gives a good gloss finish.

Characteristics


Colour: white

>

>

>


125.927 1,0 kg

M-200Polishing liquid

Description

M-200 is a polishing liquid that has a strong abrasive and cleaning action on

polyester and epoxy resin moulds. After wet sanding, M-200 is applied by

hand or machine to achieve the first good glaze.

Area of application

Removes wet sanding marks on GRP mould surfaces

Characteristics


Colour: white

>

>

>


126.074 2,5 l


72

M-300Polishing liquid

Description

M-300 is a polish that has an abrasive and cleaning effect. It is applied

after M-200 or separately in several steps by hand or machine. Provides an

improved glaze.

Area of application

Restores and creates a good gloss on GRP mould surfaces

Characteristics


Colour: white

>

>

>


126.079 2,5 l

M-400Polishing emulsion

Description

M-400 is a fine, silicone free polish that provides a high gloss mould surface.

M-400 is applied afer M-100 or M-200, as a final mould preparation. Applied

by hand or polishing machine (max. 2100 R.P.M.).

Area of application

To ensure a high gloss finish on GRP mould surfaces.

Characteristics


Colour: white

>

>

>


126.081 2,5 l

TR-301Sealer Glaze

Description

TR-301 is an off white wax based emulsion and gives GRP mould surfaces

an outstanding shine. It cleans, polishes and seals. TR-301 is applied twice

on new moulds. The sealer is applied by hand or machine.

>


125.527 3,785 l

TR-311Super Duty Buffing Compound

Description

TR-311 Super Duty Buffing Compound removes sanding marks and

provides a smooth and scratch free surface. TR-311 has been special deve-

loped for use in the GRP area.

Area of application

TR-311 restores and improves GRP mould surfaces.

Characteristics

Amount used: depends on moulds

>

>

>


137.110 3,785 l


7373

Buff 880 APolishing pad

Description

Buff 880 A is a long wearing polishing pad with curved edges used for the

first polish. It has a 14 mm-Ø-retainer with a conical strain screw (angle

polisher).

Characteristics

Diameter: 20 cm

Material: 1005 lambswool

Colour: wool white

>

>


126.093 Ø 20 cm

Buff 804 RUPolishing pad

Description

Buff 804 RU is an all purpose polishing pad with curved edges for rough and

fine polishing. The retainer is the same as that of Buff 880 A.

Characteristics

Diameter: 20 cm

Material: cotton / polyester combination

Colour: yellow

>

>


126.092 Ø 20 cm

W2Release Wax

Description

W2 is a solution of hard wax mixed with perchlorethylene and used for

demoulding GRP parts. It is suitable for laminates affected by water and can

be used together with a releasing lacquer.

Area of application

A separate or additional release agent for GRP and metal moulds when

producing:

- GRP parts out of UP and EP resins

Characteristics

Amount used per coat: 50-60 g/m²

Drying time: ca. 10 minutes

Colour: clear

>

>

>


125.742 0,1 l

125.743 0,5 l

125.744 1,0 l

125.745 5,0 l

125.746 10,0 l

RELEASING


74

Release Spray

Description

Release Spray is an all purpose release agent that contains an alternative

blowing agent and can be applied onto many materials such as GRP, glass,

resopal and silicone rubber moulds. It is sprayed on evenly and thinly from a

distance of 30 cm and is polished with a soft cloth.

Area of application

All purpose release spray for GRP and silicone moulds when using:

- PUR casting compounds

- PUR foams

- Polyester

- Epoxy

Characteristics

Amount used: 25-50 g/m²


Colour: clear

>

>

>


125.459 400 ml

Release Lacquer Green

Description

Release lacquer green is a solution of polyvinyl alcohol in water. The material

is mainly used in combination with (polished) release wax to obtain a better

release.

Release lacquer green is applied thinly and evenly with a sponge and is dry

after 30 minutes. It can be removed with warm water.

Area of application

On non-porous moulds (metal); it is applied as an additional release agent on

other moulds on top of release wax used for GRP moulded parts.

Characteristics



Colour: green

>

>

>


125.457 0,5 l

125.458 1,0 l

126.197 5,0 kg

126.208 20,0 kg

Release Lacquer Clear

Description

The same as Release lacquer green.

Characteristics



Colour: clear

>

>


125.456 0,1 l

125.890 0,5 l

125.891 1,0 l

125.892 5,0 kg

126.209 20,0 kg


7575

M-500Release wax

Description

M-500 is a release wax for continuous production. It cleans excess wax from

the mould surface and reinforces the base wax coat M-700 or M-800 on

worn places as well as improving the surface of the moulded component.

Together with M-700 or M-800 it provides a constant surface quality at low

maintenance costs. Note: M-500 cannot be used separately.

Area of application

Release wax for continuous production with a cleansing effect for reinforced

polyester and epoxy resin moulds.

Characteristics


Colour: yellowish

>

>

>


126.082 2,5 l

M-700Release wax

Description

M-700 is a highly effective, easy to use releasing wax that does not build-up.

It is silicone free and achieves a very good gloss on moulded parts. Applied

as a base wax before the mould is first used.

Area of application

A base wax before the mould is first used:

- New and touched up moulds made from reinforced polyester or epoxy

resin

Characteristics


Colour: yellowish

>

>

>


126.011 425 g

M-800High temp release wax

Description

M-800 is a heat resistant wax that has a paste consistency formulated for

e.g. pre-heated aluminium, nickel, polyester and epoxy moulds or mouldings

with a high exotherm reaction. Apply M-800 with a cloth and spread in circu-

lar movement. Polish, applying slight pressure.

Area of application

Release agent for GRP parts:

- Polyester moulds

- Epoxy moulds

- Aluminium moulds

- Nickel moulds

Characteristics


Colour: yellowish

>

>

>


126.141 400 g


76

Formula Five Wax

Description

Formula Five ® is a concentrated high grade hard wax mixture. This multiple

release agent (several demouldings are possible with one coating of Formula

Five ®) has good demoulding properties and is suited for GRP moulded

components produced in plastic and metal moulds. Formula Five ® is remo-

ved with the Formula Five Cleaner.

Area of application

Multi-purpose release agent for GRP and metal moulds for polyester moul-

ded parts.

Characteristics

Amount used: ca. 2-5 g/m²


Colour: clear

>

>

>


125.613 340 g

TR-102Regular Mold Release

Description

TR-102 can be applied fast, evenly, is quick drying and easy to polish. The

release wax is based on carnauba. It is used on cold curing GRP parts,

applied with a sponge and polished with a soft wool cloth.

Area of application

A release agent used to produce GRP moulded parts in GRP negative

moulds.

Characteristics


Colour: whitish

>

>

>


125.526 396 g

TR-104High Temp Mold Release

Description

TR-104 is applied the same as TR-102, but for thicker GRP laminates that

have a higher exotherm temperature and on hot curing GRP moulded com-

ponents. It can be applied thinly and provides an above average number of

demouldings per application. The release wax is applied by hand or with a

buffing pad.

Area of application

For the production of GRP moulded parts in:

- Steel moulds

- Aluminium moulds

- Thicker laminates

Characteristics


Colour: light blue

>

>

>


126.250 396 g


7777

TR-108Basic Mold Release

Description

TR-108 is a blend of waxes that produce a hard and deeper wax base coat.

It leaves a deep wax base durable finish and is compatible with PVA and

masking requirements. It is excellent for break-in of new moulds.

Area of application

Recommended for all fiberglass tooling, formica, and other hard surface

moulds.

Characteristics


Colour: beige

>

>

>


125.631 396 g

TR-900Liquid Release

Description

TR-900 is a high temp semi-permanent release coating which dries rapidly

at room temperature. It leaves an ultra thin release film on the mould surface.

TR-900 is an excellent multiple release agent for many polyester mould parts

and other fibre reinforced plastics.

Area of application

An effective multiple release agent for GRP and other polyester mould parts

using the following application methods:

- Open moulding

- Compression

- Injection

- Vacuum bag

- Resin transfer moulding (RTM)

Characteristics



Colour: transparent

>

>

>


139.403 3,785 l

TR-920Liquid Release

Description

TR-920 is a high-temp semi-permanent multiple release agent which dries

rapidly at room temperature. It leaves an ultra thin film on the mould surface.

TR-920 is suitable for polyester, epoxy, polyamide, SMC, BMC and other

glass and carbon fibre reinforced building laminates and moulds.

Area of application

Release agent for use with following application methods:

- Hand lay-up or spray

- Compression

- Injection

- Vacuum

- Resin transfer moulding (RTM)

Characteristics


Potlife: ca. 20 minutes at room temperature

Colour: transparent

>

>

>


138.873 3,785 l


78

TR-910Mould Sealer

Description

TR-910 is an elastic base coat for sealing the mould surface before applying

the TR-900 products. TR-910 hardens with moisture and forms a film.

Area of application

TR-910 is applied to GRP, metal or other compound materials before the

application of the release agents TR-900, 920 and 930.

- Resistant to temperatures up to 480°C

- Protects against styrene attack and maximises the efficiency of the TR-900

permanent release agents

- Seals pores

- Moisture hardening

- Adheres well to the mould surface

- Compatible with most release agents

Characteristics



Colour: transparent

>

>

>


139.404 3,785 l

APWRelease agent

Description

APW is a mixture of soft waxes in paste form used to release hard polyure-

thane foams and casting materials from moulds that have complicated and

porous surfaces. It is applied with a sponge or cloth. APW can be used with

AFH-1 as first release agent.

Area of application

For GRP, wood and silicone moulds that have complicated or porous moul-

ding surfaces:

- PUR hard foam

- PUR casting materials

Characteristics

Amount used per coat: ca. 50 g/m²

Drying time: 15-60 minutes

Colour: clear

>

>

>


126.666 0,5 kg

126.667 1,0 kg

126.668 20,0 kg

AFH-1Release agent

Description

AFH-1 is a solution consisting of a hard wax mixture used mainly to release

surfaces when moulding soft and integral foam. It is also used for moulding

with other plastics. AFH-1 is applied with a cloth or sponge. Polish well after

drying. This product is intended for industrial use only.

Area of application

For GRP, aluminium and steel moulds for moulding:

- Soft and integral foam

- Hard and structural foam

- Polyurethane

- Polyester

Characteristics

Amount used per coat: ca. 50 g/m²

Drying time: 15-60 minutes

Colour: clear

>

>

>


126.521 1,0 l

126.522 5,0 l

126.523 30,0 l


7979

Hostaphan Foil

Description

Hostaphan foil is a re-usable, high strength foil used to obtain tack free

polyester and epoxy resin surfaces. The foil is also used as a release agent

for single curved moulds. The foil cannot be deep drawn.

Area of application

For polyester and epoxy resins:

- Release foil on flat surfaces

- A cover to obtain a tack free reverse side of laminates and gelcoats

Characteristics

Thickness: 0.05 mm

>

>

>


125.571 1 m²

125.572 10 m²


TOOLS &

ACCESSORIES

:

82

Special Scissors

Description

Special scissors for aramid, carbon, woven glass and glass mat. 8 inch.

>


125.852 8‘‘

MEASURING & MIXING EQUIPMENT

Pipette

Description

Graduated pipette to measure small amounts of hardener or accelerator.

>


125.762 3 ml with 0.5 ml scale

Measuring Bottle

Description

Plastic bottle to measure liquid peroxides or accelerators. Content: 1l.

>


125.618 1 l

TOOLS & ACCESSORIES:

8383

Poly Measuring Cup

Description

Measuring Cup to measure MEKP hardener or cobalt accelerator. 500 ml

with 10 ml scale or 2000 ml with 100 ml scale.

>


125.510 2000 ml with 100 ml scale

125.509 500 ml with 50 ml scale

125.508 100 ml

Manual Dosing Pump

Description

Easy method for measuring liquids like resins, lacquers, peroxides and many

other pumpable liquids directly from the container.

The piston is moved by a lifting arm or a crank. The measuring amount can

be read on the scale of the glass cylinder.

The pump is made of glass, stainless steel, aluminium, PTFE, PVDF or PP.

It has good resistance to solvents and their preparations. The pump is not

resistant against acids and bases. These must be measured with pumps

made of PP or PVDF.

Characteristics

- No weighing or decanting

- High safety and cleanness at work

- Low material loss

- No energy supply required

>

>


137.578 1000 ml PP

137.770 100 ml HV-50

137.576 100 ml NV-PP

137.577 500 ml PP

Multi-Mix

Description

High quality disposable mixing cup for clean and precise mixing of all paint

materials.

Characteristics

Transparent cup with a mixing scale from 1:1 to 5:1.

>

>


140.549 Lid / 0,385 l

140.550 Lid / 0,75 l

140.552 Lid / 2,3 l

140.551 Lid / 1,4 l

140.545 Cup / 0,385 l

140.546 Cup / 0,75 l

140.548 Cup / 2,3 l

140.547 Cup / 1,4 l


84

Dispenser Multi Mix

Description

High quality dispenser for Multi-Mix cups.

>


137.664 0,385 l

137.665 0,75 l

137.666 1,4 l

137.667 2,3 l

PE Coated Paper Cup

Description

Mixing and stirring cup to process and pre-measure epoxy and polyester

resins, 484 ml volume.

>


125.886 500 ml

Poly Cup

Description

Flexible, re-usable bowl.

>


125.506 Poly Cup red

Plastic Bowl

Description

Plastic bowl to mix polyester resin

Characteristics

Diameter: 24 cm

Content: 2.8 l

>

>


143.090 Ø 24 cm; content 2,8 l


8585

Bucket

Description

Round plastic bucket

Content: 10 l

>


137.569 10 l bucket

Wooden Stirrer

Description

Length: 15 cm

Packing unit: 500 pcs.

>


127.471 Length 15 cm

Stirring Stick

Description

To stir small amounts, 23 cm and 30 cm length.

>




Dissolver Mixer

Description

A highly effective mixer for stirring filling materials like aluminium hydroxide,

talcum, thixotropic powder, etc. For machines up to 4000 rpm; fitting top

part under the spinner.

>


136.231 Ø 120 mm, shaft 60 cm

136.230 Ø 90 mm, shaft 60 cm

136.232 Ø 145 mm, shaft 100 cm


86

Frictional Mixer

Description

To mix PUR foams fast and thoroughly.

>


125.513 Ø 45 mm, shaft 32,5 cm

125.512 Ø 65 mm, shaft 33 cm

125.511 Ø 90 mm, shaft 34 cm

Screw Mixer

Description

To stir settled materials.

>


125.514 Ø 75 mm, shaft 38 cm

Mixing Propeller

Description

To mix viscous PUR compounds.

>


127.461 Ø 100 mm, shaft 40 cm

Propeller Mixer for Drums

Description

Fits through the 2 inch (50mm) bung. The centrifugal force causes the blades

to open automatically, Ø 230 mm when unfolded. It has a 110 cm long shaft.

>


125.521 Ø 230 mm, shaft 110 cm


8787

Drum Key

Description

Fits both bungholes on the 200 litre drums of 3/4‘‘ und 2‘‘ Ø.

>


127.463 for 3/4‘‘ and 2‘‘ bungholes

Drum Frame

Description

Mobile drum frame. Ideal to transport and store a drum. The drum content

can be mixed by rotating the drum on the frame.

>


125.672 Drum Frame

Polyethylene Drum Tap

Description

3/4‘‘: Fits the small opening of polyester resin drums. With solvents it has

only limited resistance against leakage.

2‘‘: Fits the large opening of the drum. Used for filling viscous fluids.

>


139.811 Ø 3/4‘‘

127.454 Ø 2‘‘

Dualmatic 32 EXV-AVDispenser for fillers - manual

Description

Hand operated and portable dispenser for filler and hardener cartridges. It

dispenses in the required mixing ratio. The hardener addition can be control-

led by adjusting the hardener control arm.

Area of application

Portable, handy dispenser for 3 kg cartridges. Hand operated.

>

>


123.892 for 3 kg cartridges


88

DispenserDispenser for fillers - pneumatic

Description

A pneumatic dispenser that discharges the filler and hardener cleanly and in

a set mixing ratio, saving on wastage.

Area of application

Pneumatically operated, wall-mounted dispenser:

A3C = for 3 kg cartridges.

A10C = for 10 kg cartridges

>

>


123.859 A 3C

123.840 A 10C

136.912 Spare part set A 3C/A 10C

Uniflex GunHand operated gun

Description

Classic: for cartridges.

Top: for cartridges and aluminium bags.

>


135.108 Classic for 310 ml

139.286 Top up to 400 ml

Pump SprayPressurised atomiser

Description

For applying (atomising) liquids evenly and consistently. Solvent resistant

due to Viton seals.

>


137.744 1 l


8989

Nylon Roller

Description

For laminates with a large surface area. The roller can be removed and a

longer shaft can be used, roller width 180 mm

>


125.501 width 180 mm with holder

125.502 roll with 180 mm width

137.567 long shaft 60 cm

137.568 long shaft 130 cm

ROLLER, BRUSHES & SPREADERS

Replacement Rollerfor the Nylon Roller

Description

Replacement roller for the Nylon Roller. Solvent resistant.

>


139.902 width 140 mm

Mini Wool Roller

Description

For laminates with a small surface area. Made of synthetic material. The

roller can be removed.

>


137.562 holder long

137.560 roll 100 mm white


90

Gelcoat Brush

Description

Special brush for the even application of gelcoats, sealing and topcoats, 10

cm width.

>


125.490 width 100 mm

Round Brush

Description

Available in size:

- No. 2: 15 mm Ø

- No. 4: 20 mm Ø

- No. 8: 30 mm Ø

- No. 12: 40 mm Ø

>


125.492 Ø 15 mm

125.493 Ø 20 mm

125.494 Ø 30 mm

125.495 Ø 40 mm

Flat Brush

Description

- Flat brush

- Wooden shaft

>


129.389 width 25 mm

129.390 width 35 mm

129.391 width 50 mm

129.392 width 60 mm

129.393 width 75 mm

Surfacing Brush

Description

Competitive priced brush for e.g. impregnations, 3 cm x 10 cm width.

>


125.491 width 100 mm


9191

Plastic Spreader

Description

Very tough and solvent resistant. 12 cm width.

>


125.503 120 mm

Profi Cutter

Description

18 mm with metal blade carrier

>


137.575 Cutter 18 mm

Wheel Cutter

Description

Wheel Cutter to cut multilayer reinforcements of glass or carbon fibres.

The Wheel Cutter is equipped with a tension adjustable lever and a safe

guard. The blades are made of SKS-7 Tungsten steel.

>


140.219 Wheel Cutter

140.220 spare knife

Flexible Wedge

Description

Demoulding wedge.

>


137.591 1 1/2“ x 4“

137.592 2 1/4“ x 6“

137.593 3“ x 10“


92

Medflex Wedge

Description

Demoulding wedge.

>


137.585 1 1/2“ x 4“

137.587 3“ x 10“

Standard Wedge

Description

Demoulding wedge.

>


137.588 1 1/2“ x 4“

137.589 2 1/4“ x 6“

Metal Disc Roller

Description

Metal disc roller for de-airing. For all hand lay-up and spray-up laminates.

>


125.482 Ø 15 mm, width 80 mm

125.479 Ø 40 mm, width 120 mm

125.480 Ø 40 mm, width 65 mm

DE-AIRING ROLLER


9393

Finned Roller

Description

High quality Delrin ® roller.

>


133.213 Ø 10 mm, width 50 mm

125.485 Ø 10 mm, width 80 mm

125.483 Ø 15 mm, width 40 mm

125.487 Ø 20 mm, width 80 mm

125.484 Ø 25 mm, width 135 mm

125.488 Ø 30 mm, width 90 mm

125.489 Ø 30 mm, width 195 mm

125.486 Ø 50 mm, width 8 mm

125.616 Ø 15 mm, width 80 mm

Small Flexiroller

Description

Flexible de-airing roller. For small curved sections, Ø 26 mm x 90 mm roller

width, 32 windings in 3 mm section.

>


125.477 Ø 26 mm, width 90 mm

Large Flexiroller

Description

Flexible de-airing roller. Suitable for curved sections, Ø 40mm x 130 mm

roller width, 25 windings in a 5 mm section.

>


125.475 Ø 40 mm, width 130 mm

Metal Disc Edge Roller

Description

De-airing roller for edges; Ø 50 mm x 8 mm.

>


125.481 Ø 50 mm, width 8 mm


94

Spiked Roller

Description

De-airing roller. Removes air bubbles from thick casting and coating com-

pounds. Spike length 15 mm, roller width 23 cm.

>


139.809 width 23 cm

Aluminium Roller

Description

Cross grooved de-airing aluminium roller.

>


125.583 Ø 21 mm, width 70 mm

125.584 Ø 21 mm, width 135 mm

125.585 Ø 40 mm, width 70 mm

125.586 Ø 40 mm, width 135 mm

125.590 Ø 40 mm, width 170 mm

Disc Roller for De-airing

Description

Suitable for large, curved and uneven sections.

>


136.866 Ø 40 mm, width 120 mm

136.865 Ø 40 mm, width 60 mm

136.933 Ø 40 mm, width 14 mm


9595

QuickfinderA

Aerocell........................................ 21

AFH-1 .......................................... 78

Aluminium Roller.......................... 94

APW............................................. 78

BB Component Type II ............. 36, 45

BPO-hardener powder / paste..... 18

Bucket ......................................... 85

Buff 804 RU ................................. 73

Buff 880 A.................................... 73

CCobalt-Accelerator 1% ................ 19

Cobalt-Accelerator 10 % ............. 19

DDisc Roller for De-airing............... 94

Dispenser..................................... 88

Dispenser Multi Mix ..................... 84

Dissolver Mixer ............................ 85

DMA-Accelerator 10 %................ 19

Drum Frame................................. 87

Drum Key..................................... 87

Dualmatic 32 EXV-AV................... 87

EElastocoat C 6698 ....................... 44

Elastocoat C 6698/50 .................. 43

Elastocoat C 6698/70 .................. 44

Elastocoat C 6770/1 .................... 44

Elastocoat C 6781 ....................... 45

Elastocoat C 6782 ....................... 45

Elastocoat C 6905 ....................... 46

Epolit CK ..................................... 55

Epolit OV...................................... 56

Epolit UN ..................................... 56

Epoxy BK..................................... 54

Epoxy BN..................................... 54

Epoxy LN-1.................................. 55

Estovoss Standard....................... 47

Estovoss Super............................ 48

FFinned Roller................................ 93

FL 501/GTS ................................. 18

FL 505.......................................... 17

Flat Brush .................................... 90

Flexible Wedge ............................ 91

Flexovoss K10 ............................. 42

Flexovoss K 14 ............................ 43

Flexovoss K6H............................. 41

Flexovoss K6S & K6T .................. 41

Flexovoss K7 ............................... 42

Flexovoss K9 N............................ 42

Formula Five Cleaner ................... 70

Formula Five Wax ....................... 76

Frictional Mixer ............................ 86

GG4................................................ 46

G8 Super ..................................... 47

Gelcoat Brush.............................. 90

Glosscoat..................................... 57

HH200-AT....................................... 38

H400-AT....................................... 39

H 40 B2........................................ 39

H50-AT......................................... 37

H75-AT......................................... 38

Hostaphan Foil............................. 79

HR-AT .......................................... 36

HR77-AT ...................................... 37

IInhibitor P1 .................................. 20

>

>

>

>

>

>

>

>

>

LLarge Flexiroller ........................... 93

MM-100 .......................................... 71

M-200 .......................................... 71

M-300 .......................................... 72

M-400 .......................................... 72

M-50 ............................................ 71

M-500 .......................................... 75

M-700 .......................................... 75

M-800 ......................................... 75

Manual Dosing Pump................... 83

MB-12.......................................... 20

Measuring Bottle.......................... 82

Medflex Wedge ............................ 92

Metal Disc Edge Roller ................ 93

Metal Disc Roller.......................... 92

Mini Wool Roller ........................... 89

Mixing Propeller ........................... 86

Multi-Mix...................................... 83

NNylon Roller ................................. 89

PPE Coated Paper Cup.................. 84

Pipette ......................................... 82

PL 5-1 .......................................... 20

Plastic Bowl ................................. 84

Plastic Spreader .......................... 91

Poly Cup ...................................... 84

Polyester Fillers ........................... 24

Polyethylene Drum Tap ................ 87

Poly Measuring Cup .................... 83

Polyurethane Thinner ................... 48

Profi Cutter .................................. 91

Propeller Mixer for Drums............ 86

Pump Spray ................................. 88

PUR Accelerator .......................... 49

RRelease Lacquer Clear................. 74

Release Lacquer Green ............... 74

Release Spray.............................. 74

Replacement Roller...................... 89

Round Brush................................ 90

SSanding Gelcoat (H), (S)............... 14

Screw Mixer ................................. 86

Sicovoss NL ................................ 62

Sicovoss RF................................. 62

Silastic ® 3133 ........................... 63

Silastic ® 3481 ............................ 64

Silastic ® 3483 ............................ 65

Silastic ® 3496 / 3497 / 3498 ...... 65

Silastic ® M ................................. 66

Silastic ® P-1............................... 66

Silastic ® S .................................. 66

Silastic ® S-2............................... 67

Silastic ® T-2 ............................... 67

Small Flexiroller............................ 93

Special Scissors .......................... 82

Speedcoat SC.............................. 57

Spiked Roller ............................... 94

Standard Wedge .......................... 92

Stirring Stick ................................ 85

Surfacing Brush ........................... 90

TTalcum Powder ............................ 21

TR-102......................................... 76

TR-104......................................... 76

TR-108......................................... 77

TR-210......................................... 70

TR-301......................................... 72

TR-311......................................... 72

>

>

>

>

>

>

>

TR-900......................................... 77

TR-905......................................... 70

TR-910......................................... 78

TR-920......................................... 77

TX1 .............................................. 21

UUniflex Gun .................................. 88

UPS Ferro-Alu.............................. 29

UPS Ferro-Faser .......................... 28

UPS Ferro-Fix .............................. 29

UPS Ferro-Glas............................ 28

UPS Ferro-Multi ........................... 28

UPS Ferro-Multi-Plus................... 31

UPS Ferro-Spray.......................... 29

UPS Ferro-Top ............................. 30

UPS FEW ..................................... 26

UPS Fill 21-1................................ 31

UPS KK-Plast .............................. 26

UPS Lightplast............................. 27

UPS Model Filler .......................... 30

UPS V-11 ..................................... 27

UPS Zinc Filler ............................. 31

VViscovoss Azur Super + ............... 10

Viscovoss G 311 SB (H) ............... 14

Viscovoss G 323 (H), (S) .............. 15

Viscovoss KL1 ............................. 11

Viscovoss KL3 ............................. 12

Viscovoss KL4 ............................. 12

Viscovoss KL6 ............................. 13

Viscovoss KL7 ............................. 13

Viscovoss KL8 ............................. 13

Viscovoss LT 30 SB ..................... 16

Viscovoss LT 35 SB ..................... 16

Viscovoss LT 40 SB ..................... 17

Viscovoss N 35 BT....................... 15

Viscovoss N 50S.......................... 11

Viscovoss T 40 B ......................... 10

Viscovoss T 40 BT ....................... 15

WW2 ............................................... 73

Wheel Cutter ................................ 91

Wooden Stirrer............................. 85

WR-AT.......................................... 40

YYC Nautic Filler ............................ 30

ZZR-AT........................................... 40

>

>

>

>

>

CATALOGUE INDUSTRY:

IND

US

TR

YC

AT

AL

OG

UE

Art

.-N

r. 7

06.5

23

Vosschemie GmbH

Esinger Steinweg 50

25436 Uetersen

Germany

Phone: +49 (0) 4122 / 717 -0

Fax: +49 (0) 4122 / 717 -158

[email protected]

Vosschemie GmbH

Wellerswalder Weg 24

04758 Oschatz

Germany

Phone: +49 (0) 3435 / 6202 -58

Fax: +49 (0) 3435 / 6202 -62

www.vc-24.de

www.vosschemie.de

The information is intended as a guide to application and is based on current information.

The information is offered in good faith and without guarantee or liability. Product specifications subject to change and availability.

© VOSSCHEMIE 2008, 1. Auflage

voss gesamtkatalog en - vosschemie · products for best solutions. vosschemie has many years of...

Documents