vibration sensor

1

Visit us @ www.thearyatechnologies.com

Email: aryaprotech@gmail.com

info@thearyatechnologies.com

Contact us@

0253-2512131

ATK-VS Vibration Sensor

Overview

This Vibration sensor is based on the Hi high precision vibration sensor 0801S, it

has analog output, the sensitivity of output can be adjusted by the on-board

potentiometer, you can read the analog output with any ADC to get the vibration

condition.

Features

Work voltage: DC 5V

The output valid signal is high, the light goes out Sensitivity adjustable (fine tuning)

Vibration detection range, non-directional

With mounting holes, firmware installation flexible and convenient

Application

Vibration testing for Machine.

Antitheft devices.

Electronic locker safety.

2

Specifications

Parameter Min Typ Max Units

Working Voltage 4.5 5 5.2 Volts

Otput Voltage 0.92 3.56 4.25 Volts

Pin Diagram

Pin Pin Name

Pin Name

+5V Power Supply Regulated 5V supply input

GND Ground Ground level of power supply

Out OUT Analog output sensitivity can adjust using on

board POT