vibration sensor
TRANSCRIPT
1
Visit us @ www.thearyatechnologies.com
Email: [email protected]
Contact us@
0253-2512131
ATK-VS Vibration Sensor
Overview
This Vibration sensor is based on the Hi high precision vibration sensor 0801S, it
has analog output, the sensitivity of output can be adjusted by the on-board
potentiometer, you can read the analog output with any ADC to get the vibration
condition.
Features
Work voltage: DC 5V
The output valid signal is high, the light goes out Sensitivity adjustable (fine tuning)
Vibration detection range, non-directional
With mounting holes, firmware installation flexible and convenient
Application
Vibration testing for Machine.
Antitheft devices.
Electronic locker safety.
2
Specifications
Parameter Min Typ Max Units
Working Voltage 4.5 5 5.2 Volts
Otput Voltage 0.92 3.56 4.25 Volts
Pin Diagram
Pin Pin Name
Pin Name
+5V Power Supply Regulated 5V supply input
GND Ground Ground level of power supply
Out OUT Analog output sensitivity can adjust using on
board POT