unit 1 – an introduction to science. 1) lab equipment refer to handouts

Unit 1 – An Introduction to Science

1) Lab Equipment

Refer to Handouts

2) Lab Safety

a) General Rules

– List 10 General

Lab Safety Rules

b) Safety Equipment

What are 5 pieces of Safety Equipment in a Science Classroom?

1) Eye Wash – used to wash harmful chemicals from your eyes

2) First Aid Kit – used to help treat minor injuries

3) Water Taps – Can be used to wash harmful chemicals

- can also be used to extinguish fires

4) Fire Extinguisher – used to put out fires.

5) Fume Hood – used to remove harmful fumes from the area. These are usually vented directly outside.

WHMIS

Stands for “Workplace Hazardous Materials Information System.”

Consists of 3 Main Parts.

A) Labels

1) Supplier Labels– Are provided by the companies that produce

and distribute the chemicals– Contain information about the product and

safety instructions for safe handling.– They also use safety symbols

2) Workplace Labels – are used by working environments (such as schools that have chemicals in them).

B. MSDS

Stands for “Material Safety Data Sheets.”

Provides detailed information about the chemicals being used such as: melting point, boiling point, physical and chemical characteristics, possible reactions, risk phrases, safe-handling procedures, etc.

C. Symbols

Graphing Rules

1) Identify the independent and the dependent variables.

a) Independent is the variable that the experimenter changes (usually time) and is always plotted on the x-axis.

b) Dependent variable is the variable that changes as a result of the experiment and is always plotted on the y-axis.

2) Label each axis with the name of the variable and the unit.

3) Title your graph (ex. A Graph of Dependent vs. Independent)

4) Include your name, date, class, and period on the top right hand corner of your graph.

5) Choose your scale carefully and make your graph as large as possible.

6) It is NOT necessary that the graph always go through the origin.

7) If required, calculate the slope on the graph.

8) Make sure to use a best fit line if the graph is linear. Use a smooth (free-hand) curve if the graph is a curved one.

A Graph of Speed Vs. Time

0

3

6

9

12

15

18

21

0 2 4 6 8 10 12

Time (s)

Sp

ee

d (

m/s

)

The Metric System

The metric system conveniently uses the number ten as a conversion factor.

We commonly use prefixes to write very large and small numbers more easily.

M k h da d c m ų

BASE

M k h da d c m ų

BASE

Examples:

1) 100cm = ____________ dm

2) 53kL = ____________ daL

3) 0.025MA = __________ hA

4) 50m = ____________ cm

5) 0.000046mΩ = __________ųΩ

M k h da d c m ų

BASE

Examples:

6) 600 W = _____________ kW

7) 200 mm = _____________ m

8) 0.0072 ML = ____________ hL

9) 45.3 mL = _____________ L

10) 0.00096 mW = ___________ ųW

Theory vs. Law• theory - an explanation of an event that has

been supported by consistent, repeated experimental results and has therefore been accepted by the majority of scientists.

• law - an action or condition that has been observed so consistently that scientists are convinced that it will always happen.

Physical vs. Chemical Change• physical change - a change in matter in

which no new type of matter is produced; for example, freezing, melting and boiling.

• chemical change - a change in which one or more new substances are produced with properties different from those of the starting substance.

Quantitative vs. Qualitative Observations

• Quantitative - data that consists of numbers and/or units of measurements; obtained through measurement and mathematical calculations (length, width, height, area, volume, perimeter, mass, density, circumference).

• Qualitative - information gathered in which no measurement takes place, instead the five senses are used to make the observation (see, hear, taste, feel, smell).

Lab Write Up Requirements

1) Title Page – on a separate page, you should have a page that has the name of the lab, your name, your partner’s name, the date the lab is due, and the class that you are in.

2) Purpose or Objective – this is either given or determined by the student.

3) Hypothesis – is an educated prediction made before the lab. It is okay to be wrong!

4) Materials – a list of all the equipment used in the lab. You may be required to draw a diagram of the set up.

5) Procedure – detailed step-by-step directions of what you did in your lab should be written here.

6) Data and Observations – consists of all measurements, observations, and calculations. Usually in the form of a table or chart. This is where a graph would go.

7) Analysis/Questions – All questions asked will be answered in this section.

8) Conclusion – should relate back to the purpose of the lab. What were your results? Did the experiment agree with your hypothesis?

9) Sources of Error – Record two external factors that could have effected the result of your experiment.