unique jewelry for mom diy dainty rings out of gauges of wires

Unique jewelry for mom-diy dainty rings out of gauges of wires

A unique jewelry for mom celebrates her love for

children and usually it typically features the

birthstone of each of her babies. However, in this

post, I may show you another design for the diy

dainty rings. It made use of strands of soft wire and

the only thing you need to do is rotate them in

consistent direction.

Supplies needed in diy dainty rings:

0.5mm (or other size ones) Brass Wire

Cylindrical Stick

Side Cutting Plier

Flat Nose Plier

Instructions on the unique jewelry for mom:

If you are planning on designing a unique jewelry for mom, I may recommend this project about how to diy

dainty rings out of different gauges of wire only. It does actually look easy enough!

: Prepare three strands of the wire, each Step1

about 20cm long. The length may determine the

size of decorative “rose” on upon your ring;

: Wrap both three strands around the Step2

stick once;

: Rotate the two wire ends in clock-wire Step3

direction. Pull them as tautly as you can;

: Keep rotating the two ends in same Step4

direction;

: Stop until the focal “rose” reaches Step5

your desire pattern;

: Take the ring off the stick; Step6

: Wrap the excess wire tails to hold Step7

the ring blank coils together;

: Do the same process on the other Step8

side;

: Try with other gauge of wire you want!Step9

Did the diy dainty rings spark more thoughts about

unique jewelry for mom? Whether an item adorned

with birthstone or include someone’s name, the

handcrafts can definitely embody the unspeakable

emotions and feelings deep in heart.

Jewelry tools needed in your handcraft making please click:

http://www.pandahall.com/beads/wholesale-Jewelry-Tools/0-109-1.html