ump: safe care presentation
Post on 11-Apr-2017
184 Views
Preview:
TRANSCRIPT
Alternative Fuel & PowerOur Product Commitment: Non-Toxic Non-Reactive Non-Carcinogenic Readily Biodegradable Derived from renewable biobased resources Safe to use, store and dispose of
Alternative Fuel & PowerSAFE CARE® productsdo not contain: Petroleum distillates Phenolics Glycol ethers Sulfonics Terpenes Synthetics Chlorines Builders / reagents Caustics Ammoniates Silicones Metasillicates Dyes / Fragrances Aldehydes
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Core Products:SC-1000 Aqueous Cleaner ConcentrateSC-Aircraft & Metal Cleaner ConcentrateSC-SuperSolv Safety SolventSC-EZ-Solv Safety SolventSC-MaxiSolv Safety SolventSC-ActiSolv Safety SolventSC-OmniBrite AcidSC-Safe-T-Solv Concrete Cleaner
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Our most versatile and powerful non-ionic surfactant cleaner used in a variety of industrial applications. Certifications include:
USEPA National Oil & Hazardous Substances Pollution Contingency Program (NCP) USEPA Design for the Environment (DfE) USDA NSF #046649 – A1 & L1 California SCAQMD – Clean Air Solvent NSN 6850-01-474-1273 (5 gal.) NSN 6850-01-474-1311 (55 gal.)
SC-1000 Aqueous Cleaner Concentrate
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
SC-1000 Aqueous Cleaner Concentrate
SC-1000 can not create a standing emulsion - illustrates the separation of crude oil and water using SC-1000 Aqueous Cleaner Concentrate.
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
SC-Aircraft & Metal Cleaner ConcentrateAn advanced surfactant system especially formulated for use on non-ferrous and soft metal surfaces such as aluminum. Certifications include:
US Air Force MIL-PRF-87937D, Type IV US Navy MIL-PRF-85570C, Type II BOEING D6-17487, Revision N California SCAQMD – Clean Air Solvent NSN 6850-01-433-0873 (5 gal.) NSN 6850-01-429-2371 (55-gal.) NSN 6850-01-506-7708 (bulk)
Cleaners, Solvents & Specialty Products
Safely Cleaning Planet Earth®
Surfactant TechnologySchematic illustration of the manner in which the colloid particles called micelles perform in reducing surface tension of water in a very dilute solution.
IndustrialApplications
Transportation: Aviation Marine Rail/Bus Trucking Automotive
Transportation: Exterior / Interior Cleaning Graffiti, Tar & Gum Removal Engine Degreasing Tire & Wheel Cleaning Carpet & Upholstery Cleaning Parts Washing
Industrial: Manufacturing Facilities Maintenance Process Cleaning Equipment Maintenance
Industrial: Janitorial: Floors, Walls, Restrooms, Kitchens, Drains, Carpets Facilities Maintenance: Interior & Exterior, Pressure Washing, Concrete Cleaning Process Cleaning: Ultra-Sonic, Parts Washing (solvent & water-based) Equipment Maintenance:
Heavy deposits of asphaltenes were first removed with a spatula, then SC-EZ-Solv was spray applied and agitated with a plastic brush to loosen the hydrocarbon build-up.
A 50% solution of SC-1000 Aqueous Cleaner was used with a pressure washer as a final step in removing the hydrocarbon soil
Oil spill barriers were cleaned with SC-EZ-Solv and SC-1000 Aqueous Cleaner. Spray SC-EZ-Solv and agitate with a brush to loosen the heavy asphaltene deposits.
A 6% solution of SC-1000 Aqueous Cleaner was used as a final step to remove the hydrocarbon soil and solvent.
Cleaning large pistons fromWartsila engines in pump station using SC-Supersolv™ Safety Solvent.
For cleaning petroleum hydrocarbon, SC-1000 Aqueous Cleaner at a 50% solution was sprayed on and wiped off.
A bath of SC-OmniBrite Acid is used to clean copper fin coils. Dwell time will vary depending on the soil.
For parts washing, SC-1000 Aqueous Cleaner at a 50% solution is a typical dilution.
SC-1000 Aqueous Cleaner was used at a 50% solution and allowed to dwell for 30 minutes to remove baked on soil.
SC-Aircraft & Metal Cleaner Concentrated is diluted to a 10% solution for routine exterior cleaning
SC-1000 Aqueous Cleaner is diluted to a 5-10% solution for exterior cleaning of stainless steel passenger trains using a pressure washer.
To remove acrylic spray paint, apply SC-Graffiti, Tar & Gum Remover, wipe with a rag, then rinse with a 3-5% solution of SC-1000 Aqueous Cleaner.
Spray paint will immediately release from metal surfaces.
After
Brake cleaning machine that was cleaned using a 50/50 blend of SC-Supersolv and SC-1000 Aqueous Cleaner at a 20% solution.
Municipal buses are pretreated with a 10% solution of SC-1000 Aqueous Cleaner before going through the wash tunnel.
When the advertising sign was removed, heavy soil was cleaned using a 50/50 blend of SC-Supersolv and SC-1000 Aqueous Cleaner at a 5 - 10% solution.
Tunnel washing with a 2 – 5% solution of SC-1000 Aqueous Cleaner
Airport runways were cleaned using a 5% solution of SC-Safe-T-Solv Concrete Cleaner that was brushed on and rinsed with a pressure washer.
We challenge you to
“Close the circle…
Thank you
top related