ump safe care presentation english

Alternative Fuel & PowerOur Product Commitment:

Non-Toxic

Non-Reactive

Non-Carcinogenic

Readily Biodegradable

Derived from renewable biobased

resources

Safe to use, store and dispose of

Alternative Fuel & PowerSAFE CARE® products

do not contain:

Petroleum distillates Phenolics

Glycol ethers Sulfonics

Terpenes Synthetics

Chlorines Builders / reagents

Caustics Ammoniates

Silicones Metasillicates

Dyes / Fragrances Aldehydes

Cleaners, Solvents & Specialty Products

Safely Cleaning Planet Earth®

Core Products:

SC-1000 Aqueous Cleaner Concentrate

SC-Aircraft & Metal Cleaner Concentrate

SC-SuperSolv Safety Solvent

SC-EZ-Solv Safety Solvent

SC-MaxiSolv Safety Solvent

SC-ActiSolv Safety Solvent

SC-OmniBrite Acid

SC-Safe-T-Solv Concrete Cleaner



Our most versatile and powerful non-ionic surfactant

cleaner used in a variety of industrial applications.

Certifications include:

USEPA National Oil & Hazardous Substances

Pollution Contingency Program (NCP)

USEPA Design for the Environment (DfE)

USDA NSF #046649 – A1 & L1

California SCAQMD – Clean Air Solvent

NSN 6850-01-474-1273 (5 gal.)

NSN 6850-01-474-1311 (55 gal.)





SC-1000 can not create a

standing emulsion - illustrates

the separation of crude oil and water using

SC-1000 Aqueous Cleaner Concentrate.



SC-Aircraft & Metal Cleaner Concentrate

An advanced surfactant system especially formulated for

use on non-ferrous and soft metal surfaces such as

aluminum. Certifications include:

US Air Force MIL-PRF-87937D, Type IV

US Navy MIL-PRF-85570C, Type II

BOEING D6-17487, Revision N

California SCAQMD – Clean Air Solvent

NSN 6850-01-433-0873 (5 gal.)

NSN 6850-01-429-2371 (55-gal.)

NSN 6850-01-506-7708 (bulk)



Surfactant Technology

Schematic illustration of the manner in which the

colloid particles called micelles perform in reducing

surface tension of water in a very dilute solution.

Industrial

Applications

Transportation:

Aviation

Marine

Rail/Bus

Trucking

Automotive

Transportation:

Exterior / Interior Cleaning

Graffiti, Tar & Gum Removal

Engine Degreasing

Tire & Wheel Cleaning

Carpet & Upholstery Cleaning

Parts Washing

Industrial:

Manufacturing

Facilities Maintenance

Process Cleaning

Equipment Maintenance

Industrial:

Janitorial: Floors, Walls, Restrooms,

Kitchens, Drains, Carpets

Facilities Maintenance: Interior &

Exterior, Pressure Washing, Concrete

Cleaning

Process Cleaning: Ultra-Sonic, Parts

Washing (solvent & water-based)

Equipment Maintenance:

Heavy deposits of asphaltenes were first removed with a

spatula, then SC-EZ-Solv was spray applied and agitated

with a plastic brush to loosen the hydrocarbon build-up.

A 50% solution of SC-1000 Aqueous Cleaner was

used with a pressure washer as a final step in

removing the hydrocarbon soil

Oil spill barriers were cleaned with SC-EZ-Solv and SC-

1000 Aqueous Cleaner. Spray SC-EZ-Solv and agitate with

a brush to loosen the heavy asphaltene deposits.

A 6% solution of SC-1000 Aqueous Cleaner was used as

a final step to remove the hydrocarbon soil and solvent.

Cleaning large pistons from

Wartsila engines in pump

station using SC-Supersolv™

Safety Solvent.

For cleaning petroleum hydrocarbon, SC-1000 Aqueous

Cleaner at a 50% solution was sprayed on and wiped off.

A bath of SC-OmniBrite Acid

is used to clean copper fin

coils. Dwell time will vary

depending on the soil.

For parts washing, SC-1000 Aqueous

Cleaner at a 50% solution is a typical dilution.

SC-1000 Aqueous Cleaner was

used at a 50% solution and allowed

to dwell for 30 minutes to remove

baked on soil.

SC-Aircraft & Metal Cleaner Concentrated is diluted to a

10% solution for routine exterior cleaning

SC-1000 Aqueous Cleaner is diluted to a 5-10% solution for

exterior cleaning of stainless steel passenger trains using a

pressure washer.

To remove acrylic spray paint, apply SC-Graffiti, Tar &

Gum Remover, wipe with a rag, then rinse with a 3-5%

solution of SC-1000 Aqueous Cleaner.

Spray paint will immediately

release from metal surfaces.

After

Brake cleaning machine that was cleaned using a 50/50

blend of SC-Supersolv and SC-1000 Aqueous Cleaner

at a 20% solution.

Municipal buses are pretreated with a 10% solution

of SC-1000 Aqueous Cleaner before going through

the wash tunnel.

When the advertising sign was removed, heavy soil was

cleaned using a 50/50 blend of SC-Supersolv and SC-

1000 Aqueous Cleaner at a 5 - 10% solution.

Tunnel washing with a 2 – 5% solution of

SC-1000 Aqueous Cleaner

Airport runways were cleaned

using a 5% solution of SC-Safe-

T-Solv Concrete Cleaner that

was brushed on and rinsed with

a pressure washer.

We challenge

you to

“Close the circle…

Thank you