synchronous alternators an10 line

Post on 04-Feb-2017

243 Views

Category:

Documents

2 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Motors | Automation | Energy | Transmission & Distribution | Coatings

Synchronous AlternatorsAN10 Line

New

www.weg.net

Synchronous Alternators AN10 Line2

AN10 alternators were developed to be used in generator sets for the Marine and Oil & Gas industries.Designed with mechanical characteristics and specific features for machinery rooms with limited space in oil rigs and vessels, in compliance with the requirements established by the main marine classification societies, such as: ABS, DNV and Lloyd’s.

Synchronous Alternators AN10 Line

Technical Data � Outputs: 1,100 to 3,000 kVA� Frames: 450 to 560 (IEC)� Voltages: 440, 690 and 4,160 V� Number of poles: 4� Frequency: 60 Hz� Protection degrees: IP23 to IP55W� Mountings: IM1001 and IM1101� Cooling systems: self-ventilated (IC01) and air-water

heat exchanger TEWAC (IC81W) Other features on request.

Attributes Benefits

Special painting plan for harsh environmentsGreater resistance and durability of the coatings, protecting components and windings against

environments with oil moisture, salt, high humidity and high temperatures

Electrical fectures for marine High efficiency, reactances according to application requirements and low harmonic distortion level

Mechanical fectures for marine Durability, reliability and mechanical resistance

Compact design Ideal for applications with severe space restrictions

Flexibility Projects adapted to various applications and requirements

Optimized for operation Low maintenance cost and easy access to alternator components

www.weg.net

Synchronous Alternators AN10 Line 3

Local Content

Marine and Oil & Gas industries demands higher local content rate at equipment to be installed in oil rigs and offshore support vessels.Looking in this direction, WEG support the customers to achieve the requested local content rate by supplying products with high level of nationalization.Using a completely national workforce and with the main component parts of these alternators manufactured at WEG, the AN10 line of alternators reaches high levels of local content.

Application

Alternators with optimized performance, specially designed to operate at offshore support vessels and oil rigs. Used in main diesel generator sets, shaft generators, port or standby alternators.

LOCALCONTENT

www.weg.net

Synchronous Alternators AN10 Line4

Accessories

Standard Accessories � Temperature sensor on the stator winding � Temperature sensor on the bearings � Hot and cold air temperature sensor (IC81W) � Temperature sensor at the water inlet and outlet (IC81W) � Water leakage detector � Space heater

Optional Accessories � Current transformer for droop � Current transformer for differential protection � Potential transformer for voltage regulator feedback � Field contactor � Automatic Voltage Regulator (AVR)

Special Features � Height from the shaft center line to the alternator foot (dimension h) according to the customer’s specification

� Footprint according to the customer’s specification

Other accessories on request.

Output per Frame - 60 Hz - 4 Poles

Outputs in kVA

Frame 440 V 690 V 4,160 V

450 1,550 1,550 1,550

1,900 1,900 1,850

5002,125 2,125 2,125

2,250 2,250 2,250

560

2,500 2,500 2,500

2,700 2,700 2,700

- - 3,000

www.weg.net

Synchronous Alternators AN10 Line 5

Mounting Features

Bearings � Grease-lubricated rolling bearings (NDE bearing electrically insulated and shaft grounding brush on the DE)

� Expected lifetime L10h of 80,000h

Terminal Box � Mounted on top of the machine with availability for connection on the right, left and top

Modularity � Mechanical flexibility in order to meet the height from the diesel engine shaft to the baseframe

� Possibility of reversing the connection side of the radiator without changing the project

Cooling � Possibility of using single or double tubes radiators, with water inlet temperature according to the customer’s specification

Coils � Form wound coils (rectangular wire) impregnated with the VPI system (Vacuum Pressure Impregnation), able to operate in bad weather, marine environment and with fundamentally switched loads

Excitation � Auxiliary exciter with permanent magnets (PMG) for powering the power circuit of the AVR

www.weg.net

Synchronous Alternators AN10 Line6

Technical Assistance WEG counts on a network of authorized technical assistance, including at the main marine industry areas in Brazil, fully trained and qualified to provide prompt high quality service.This network structure has the expertise to offer emergency service, provide technical support on the field, including checking’s, commissioning of machines, among other services.Besides this network of authorized technical assistance, WEG counts on an office-based team consisting of technicians and engineers duly qualified and trained to provide remote and prompt field service support. With the application of state-of-the-art equipment, this technical team is available24 hours, 7 days a week to support our customers so as to minimize the downtime of the operating vessels.

ServiceWEG is market leader in motors and generators and also offers services of inspection, restoration and repowering of medium and large electrical machines, performed in the factory or in the field, including other brands, as follows:

� DC generators and motors � Three-phase induction motors (squirrel cage or slip ring, low, medium and high voltage)

� Synchronous motors (with or without brushes, low, medium and high voltage)

� Turbogenerators � Hydrogenerators

AuthorizedServiceCenter

www.weg.net

Synchronous Alternators AN10 Line 7

WEG OriginalParts and PiecesAfter years in operation, in addition to the periodic checkups described in the maintenance plan, the alternators need restoration in order to keep working properly.For this restoration, we recommend that you use original spare parts supplied by the manufacturer.WEG team is available to promptly assist you in the correct identification of the component parts.

WEG Worldwide Operations

WEG Group - Energy Business Unit Jaraguá do Sul - SC - Brazil Phone: +55 47 3276 4000 energia@weg.net www.weg.net

For those countries where there is not a WEG own operation, find our local distributor at www.weg.net.

Cod

: 50

0432

49 |

Rev

: 00

| Dat

e (m

/y):

12/2

013

The

valu

es s

how

n ar

e su

bje

ct to

cha

nge

with

out p

rior

notic

e.

ARGENTINAWEG EQUIPAMIENTOS ELECTRICOS San Francisco - CordobaPhone: +54 3564 421 484info-ar@weg.netwww.weg.net/ar

WEG PINTURAS - PulverluxBuenos AiresPhone: +54 11 4299 8000tintas@weg.net

AUSTRALIAWEG AUSTRALIAVictoria Phone: +61 3 9765 4600info-au@weg.netwww.weg.net/au

AUSTRIAWATT DRIVE - WEG GroupMarkt Piesting - ViennaPhone: +43 2633 404 0watt@wattdrive.comwww.wattdrive.com

BELGIUMWEG BENELUXNivelles - BelgiumPhone: +32 67 88 84 20info-be@weg.netwww.weg.net/be

BRAZILWEG EQUIPAMENTOS ELÉTRICOSJaraguá do Sul - Santa CatarinaPhone: +55 47 3276-4002info-br@weg.netwww.weg.net/br

CHILEWEG CHILESantiagoPhone: +56 2 784 8900info-cl@weg.netwww.weg.net/cl

CHINAWEG NANTONGNantong - Jiangsu Phone: +86 0513 8598 9333info-cn@weg.netwww.weg.net/cn

COLOMBIAWEG COLOMBIABogotáPhone: +57 1 416 0166info-co@weg.netwww.weg.net/co

FRANCEWEG FRANCESaint Quentin Fallavier - LyonPhone: +33 4 74 99 11 35info-fr@weg.netwww.weg.net/fr

GERMANYWEG GERMANY Kerpen - North Rhine Westphalia Phone: +49 2237 9291 0info-de@weg.netwww.weg.net/de

GHANAZEST ELECTRIC GHANA WEG GroupAccraPhone: +233 30 27 664 90info@zestghana.com.ghwww.zestghana.com.gh

INDIAWEG ELECTRIC INDIABangalore - KarnatakaPhone: +91 80 4128 2007 info-in@weg.netwww.weg.net/in

WEG INDUSTRIES INDIAHosur - Tamil NaduPhone: +91 4344 301 501info-in@weg.netwww.weg.net/in

ITALYWEG ITALIACinisello Balsamo - MilanoPhone: +39 02 6129 3535info-it@weg.netwww.weg.net/it

JAPANWEG ELECTRIC MOTORSJAPANYokohama City - KanagawaPhone: +81 45 550 3030info-jp@weg.netwww.weg.net/jp

MALAYSIAWATT EURO-DRIVE - WEG GroupShah Alam, SelangorPhone: 603 78591626info@wattdrive.com.mywww.wattdrive.com

MEXICOWEG MEXICOHuehuetoca Phone: +52 55 5321 4231info-mx@weg.netwww.weg.net/mx

VOLTRAN - WEG GroupTizayuca - HidalgoPhone: +52 77 5350 9354www.voltran.com.mx

NETHERLANDSWEG NETHERLANDS Oldenzaal - OverijsselPhone: +31 541 571 080info-nl@weg.netwww.weg.net/nl

PERUWEG PERULimaPhone: +51 1 472 3204info-pe@weg.netwww.weg.net/pe

PORTUGALWEG EUROMaia - PortoPhone: +351 22 9477705info-pt@weg.netwww.weg.net/pt

RUSSIA and CISWEG ELECTRIC CIS Saint Petersburg Phone: +7 812 363 2172 info-ru@weg.net www.weg.net/ru

SOUTH AFRICAZEST ELECTRIC MOTORSWEG Group JohannesburgPhone: +27 11 723 6000info@zest.co.zawww.zest.co.za

SPAINWEG IBERIAMadridPhone: +34 91 655 30 08info-es@weg.netwww.weg.net/es

SINGAPOREWEG SINGAPORE SingaporePhone: +65 68589081info-sg@weg.netwww.weg.net/sg

SCANDINAVIAWEG SCANDINAVIAKungsbacka - SwedenPhone: +46 300 73 400info-se@weg.netwww.weg.net/se

UKWEG ELECTRIC MOTORS U.K.Redditch - WorcestershirePhone: +44 1527 513 800info-uk@weg.netwww.weg.net/uk

UNITED ARAB EMIRATESWEG MIDDLE EAST DubaiPhone: +971 4 813 0800info-ae@weg.netwww.weg.net/ae

USAWEG ELECTRIC Duluth - GeorgiaPhone: +1 678 249 2000info-us@weg.net www.weg.net/us

ELECTRIC MACHINERYWEG GroupMinneapolis - MinnesotaPhone: +1 612 378 8000www.electricmachinery.com

VENEZUELAWEG INDUSTRIAS VENEZUELAValencia - CaraboboPhone: +58 241 821 0582info-ve@weg.netwww.weg.net/ve

top related