surge protection device

Surge Protection Device

Surge Arrester

A surge arrester or surge protecter is a device to protect electrical equipment from over-voltage transients caused by external (lightning) or internal (switching) events.

Surge Protective Device

A surge protective device reduces the magnitude of a voltage transient surge thus protecting equipment from damaging effects. SPD’s were commonly known in the past as Transient Voltage Surge Suppressor.

Types of Surge Protective Device

Type 1 SPD (LINE SIDE)

Permanently Connected SPD – Installation between the secondary of the service transformer and the LINE side of the service disconnect over current device

Type 2 SPD (LOAD SIDE)

Permanently Connected SPD intended for installation on the LOAD side of the service disconnect over current device, including SPDs located at the branch panel.

Type 3 SPD

Point of utilization SPDs, installed a minimum of 10 meters (30 feet) from the electrical service panel, for example cord connected, direct plug-in (DPI), receptacle type and SPDs installed at the utilization equipment being protected.

If you are looking best manufacturers, suppliers, exporters of surge protection device then you feel free to contact with tradeindia. We have reputed listing of manufacturers of surge Protection device.