surfacing using solidw

Norman F. SimmsCAD Mechanical / Electrical Designer

Surface Modeling in SolidWorks

2

Create 3D Sketch to Guide your Surfaces

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

3Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Creating aLofted Surface

4Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Sweep (Profile, Path, and Guide Curve)

5Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Sweep (Profile, Path, and Guide Curve)

6Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Sweep (Profile, Path, and Guide Curve)

7Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Loft (Tangency to Face)

8Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Loft (Tangency to Face – Adjust End Constraints)

9Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surfaces – Loft (Tangency to Face)

10Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Knit Surfaces

11Norman F. Simms Mechanical / Electrical Designer 215-269-

0390

Pull Point 1

Filled Surface with Constraint Point

12

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Filled Surface with Constraint Point for the other Side

13

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Planar Surface

Planar Surface

Creating Planar Surfaces

14Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Knit Surface – Combining Surfaces Together

15Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Revolved Surface – (Revolving Line Around an Axis)

16Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Move Copy (Moving Surface down -6.35mm)

17Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Trim Surfaces

18Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Extrude Surface & Move & Copy Surface

Move/Copy Command

19Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Using Move/Copy Command to Copy and Rotate Surface

Select Feature in the Feature Tree and Select Hide

20

Norman F. Simms Mechanical / Electrical Designer 215-269-0390

Surface Modeling is used in designing all types of complex cures and is used more and more in product design, automotive, aircraft, and a host of other applications.

If you are someone who is trying to understand CAD , I hope this was a help.

If you are someone who needs someone to help them create new designs. I hope you will use the number below and give me a call.

Thank You for Your Time.