standard ancillary products - plastestrip profiles ancillary products.pdf · standard ancillary...
Post on 16-Jul-2020
10 Views
Preview:
TRANSCRIPT
Standard Ancillary Products
By Plastestrip Profiles
External box corner
Shiplap external corner
Birds beak
Edge finishing profile
External arrow head corner
F type internal corner
Horizontal chair profile
Vertical joint profile
This drawing remains the property of Plastestrip Profiles, St Austell
ALL COPYRIGHTS RESERVED
GJLDrawn by
REF: AL/18P
05/11/2015Date
al18.dwg
Material: 6063 T6 Aluminium
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
A DIVISION OF AMARI PLASTICS PLCPROFILES Typical detail
Please note , when we colourcoat our profiles, only visiblefaces (as shown in this detail)are covered.If you wish to usethe profile in a different way,please let our sales teamknow when you order so wecan coat the correct faces foryour installation. Thanks
This drawing remains the property of Plastestrip Profiles, St Austell
ALL COPYRIGHTS RESERVED
GJLDrawn by
REF: AL/333P
02/08/2013Date
al333.dwg
Material: 6063 T6 grade Aluminium
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
A DIVISION OF AMARI PLASTICS PLCPROFILES Typical detail
Please note , when we colourcoat our profiles, only visiblefaces (as shown in this detail)are covered.If you wish to usethe profile in a different way,please let our sales teamknow when you order so wecan coat the correct faces foryour installation. Thanks
This drawing remains the property of Plastestrip Profiles, St Austell
GJLDrawn by
REF: AL/TP6
25/02/2016
Date
altp6.dwg
Material: 6063 T6 Aluminium
Filename
1:1
Edition
ONESheet
1/1
Dimensions in mm
Scale
Typical detailALL COPYRIGHTS RESERVED
A DIVISION OF AMARI PLASTICS PLC
PROFILES
This drawing remains the property of Plastestrip Profiles, St Austell
GJLDrawn by
REF: AL/EX8
18/03/2013Date
alex8.dwg
Material: 6063 T6 Aluminium
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
Typical detailA division of Amari Plastics plc
Please note , when wecolour coat our profiles, onlyvisible faces (as shown inthis detail) are covered.If youwish to use the profile in adifferent way, please let oursales team know when youorder so we can coat thecorrect faces for yourinstallation. Thanks
This drawing remains the property of Plastestrip Profiles, St Austell
ALL COPYRIGHTS RESERVED
GJLDrawn by
REF: AL/EF8
05/08/2013Date
alef8.dwg
Material: 6063 T6 Aluminium
Filename###
EditionONE
Sheet1/1
Dimensions in mmScale
A DIVISION OF AMARI PLASTICS PLCPROFILES Typical detail
Please inform our sales teamwhen you order this profilewhich format you are using itin so we can coat the correctside. Thanks
Internal corner
This drawing remains the property of Plastestrip Profiles, St Austell
GJLDrawn by
REF: AL/CH8
25/11/2013Date
alch8.dwg
Material: 6063 T6 Aluminium
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
Typical detailA division of Amari Plastics plc
Please note , when wecolour coat our profiles, onlyvisible faces (as shown inthis detail) are covered.If youwish to use the profile in adifferent way, please let oursales team know when youorder so we can coat thecorrect faces for yourinstallation. Thanks
Ref Description Colours
AL/16 For 6mm panels, 3055mm lengthsAvailable in any
colour*setup costs may apply
AL/18 For 8mm panels, 3055mm lengths
AL/110 For 10mm panels, 3055mm lengths
Ref Description Colours
AL/333 For shiplap systems, 3055mm lengthsAvailable in any
colour*setup costs may apply
Ref Description Colours
AL/TP6For any panel,
can be used as a horizontal or vertical trim, 3055mm lengths
Available in any colour
*setup costs may apply
Ref Description Colours
AL/76P Edge finishing trim for 6mm panelsAvailable in any
colour*setup costs may apply
AL/78P Edge finishing trim for 8mm panels
AL/710P Edge finishing trim for 10mm panels
Ref Description Colours
AL/66P Vertical joint trim for 6mm panelsAvailable in any
colour*setup costs may apply
AL/68P Vertical joint trim for 8mm panels
AL/610P Vertical joint trim for 10mm panels
Ref Description Colours
AL/EX6 For 6mm panels, 3055mm lengthsAvailable in any
colour*setup costs may apply
AL/EX8 For 8mm panels, 3055mm lengths
AL/EX10 For 10mm panels, 3055mm lengths
Ref Description Colours
AL/EF6 For 6mm panels, 3055mm lengthsAvailable in any
colour*setup costs may apply
AL/EF8 For 8mm panels, 3055mm lengths
AL/EF10 For 10mm panels, 3055mm lengths
Ref Description Colours
AL/CH6 Chair profile for 6mm panel, 3055mm lengthsAvailable in any
colour*setup costs may apply
AL/CH8 Chair profile for 8mm panel, 3055mm lengths
AL/CH10 Chair profile for 10mm panel, 3055mm lengths
Standard Ancillary Products
By Plastestrip Profiles
Gaskets for timber
Blackout tape
Screws for fixing panels to timber
We can also supply adjustable facade support systems to mount your cladding panels
Plastestrip Profiles1 - 4 Enterprise ParkSt AustellCornwall. PL25 4EJ
t. 01726 74771f. 01726 69238
www.plastestrip.comsales@plastestrip.com
Plastestrip Profiles are a stockholder and sole UK distributor for the Allface smart fixing system. Full technical backup including calculations, system design, take-off service and on site pullout tests.
• Compatible with most cladding panels. • Extensive, fully adjustable range of systems solutions.• Manufactured from high strength extruded aluminium.• Thermal Separation-Elements to avoid thermal bridging.• Suitable for fixing to masonry, timber and steel.• Stocked in UK to allow fast turn around.• Direct to site deliveries.• Extended warranty available.
FastFrame is an adjustable cladding fixing system that works perfectly in conjunction with your cladding panel. We can offer an in house technical service to calculate the safest yet most economical bracket spacings to support your facade. Save time and money by completing the checklist from our website.• 2 - 3 day in-house calculations specific to every application.• FastFrame is available from a UK distribution network and is usually available ex-stock for
overnight delivery.• Compatible with most cladding panels.• The adjustable, universal bracket, made from 5251 structural grade
aluminium comes complete with an isolation clip and is suitable for most building substrates.
• The T & L rails are made from high specification 6063 T6 grade aluminium.
• On-site pull out tests by trained technicians.• Fully backed by an independent structural engineer offering PI cover.
Anti rattle tape for aluminium rails
Aluminium ventilation
Rivets for fixing panels to aluminium railsThis drawing remains the property of Plastestrip Profiles, St Austell
GJLDrawn by
REF: PVC/50
31/10/2013Date
pvc50.dwg
Material: Plastic
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
A division of Amari Plastics plc
This drawing remains the property of Plastestrip Profiles, St Austell
GJLDrawn by
REF: AL/VENT/30/40
05/11/2015Date
alvent3040.dwg
Material: 1050A grade aluminium
Filename1:1
EditionONE
Sheet1/1
Dimensions in mmScale
Typical detail
Please note , when wecolour coat our profiles, onlyvisible faces (as shown inthis detail) are covered.If youwish to use the profile in adifferent way, please let oursales team know when youorder so we can coat thecorrect faces for yourinstallation. Thanks
ALL COPYRIGHTS RESERVEDA DIVISION OF AMARI PLASTICS PLC
PROFILES
Ref Description Colours090/36P Gasket for intemediate panel supports, 25m rolls
Available in black or white
090/60P Gasket for vertical panel joints, 25m rolls090/75P Gasket for vertical panel joints, 25m rolls
090/125P Gasket for vertical joint, internal or external corners, 25m rolls
Ref Description Colours
PVC/50/33 50mm PVC tape to black out silver aluminium railsBlack
PVC/100/33 100mm PVC tape to black out silver aluminium rails
Ref Description Colours
RP9 9mm head Torx screw for fixing 6 - 10mm panels to timber, A4 stainless steel, 100 per box Available in any
colour*setup costs may applyRP12 12mm head Torx screw for fixing 6 - 10mm panels to timber,
A2 stainless steel, 100 per box*Please ask our technical team for advice if you are fixing in a marine / coastal environment.
Ref Description Colours
090/35N Anti rattle tape for intemediate panel supports, 25m rollsAvailable in
black090/59N Anti rattle tape for vertical panel joints, 25m rolls
090/99N Anti rattle tape for vertical joint, internal or external corners, 25m rolls
Ref Description ColoursAL/VENT/30/40 30 - 40mm cavity closer, 2500mm lengths
Available in any colour
*setup costs may apply
AL/VENT/30/50 30 - 50mm cavity closer, 2500mm lengthsAL/VENT/50/70 50 - 70mm cavity closer, 2500mm lengths
AL/VENT/30/100 30 - 100mm cavity closer, 2500mm lengthsAL/VENT/30/120 30 - 120mm cavity closer, 2500mm lengths
Ref Description ColoursRIVETS/18/14 14mm head rivet, grip range 8 - 14mm, box of 100 Available in any
colour*setup costs may apply
RIVETS/18/16 16mm head rivet, grip range 8 - 14mm, box of 100
RIVETS/23 16mm head rivet, grip range 14 - 19mm, box of 100*Please ask our technical team for advice if you are fixing in a marine / coastal environment.
090/36P 090/60P 090/75P 090/125P 090/35N 090/59N 090/99N
By Plastestrip Profiles
top related