slitting line sacma 1550 x 0,3-3,5 engfimimachinery.com/cms/fimi_prodotti/pdf87.pdf · general...

GENERAL DETAILS SCOPE OF SUPPLY

SLITTING LINE SACMA 1.550 x 0,3-3,5 MM - SECOND HAND

Manufacturing year Overhauled

Inlet Material Type

Ultimate Tensile Strength Strip thickness

Strip width

Coil Data Coil weight

Internal coil Ø External coil Ø

Slit Coil Data Weight Width

Internal Ø External Ø

Characteristics Working Speed

Working Direction Line reference

Number of Cuts Unwinding

Winding

1979 2003

Steel Max 410 N/mm2 0,3 ÷ 3,5 mm 1.550 mm

20 Ton 485 ÷ 520 mm 1.500 mm

22 Ton 50 ÷ 1.500 mm 500 mm 1.500 mm.

0-150 m/min Right-Left Centre See enclosed table From the Top From the Top

Item 01 Item 02 Item 03

Item 04

Item 05 Item 06

Item 07 Item 08

Item 09 Item 10

Item 11

Item 12

Traversing Mandrel Uncoiler Hydraulic Coil Elevator Peeler Unit Consisting of: - Peeler - Straightening Rolls - Cropping Shear

Slitting Machine Removable & Interchangeable Head Type 2 Heads Scrap Winder Tension Unit Consisting of: - Drawing Rolls - Cropping Shear - Strips Feeding Arm

Recoiler with Strips Pressing Arm Coil Capstan with 2 pairs of Arms for Unloading Stripes from Recoiler

Hydraulic Packs - Duplomatic Electrical Equipment (2003)

Existing Protection Fencing around the Line

Options: - Toolings

F.I.M.I. - Fabbrica Impianti Macchine Industriali SpA Headquarters: via dell’Industria, 15 | 23897 Viganò (Lc) | ITALY T. +39 039 92141|F. +39 039 9272090|info@fimimachinery.com

INSTALLATION AND START-UP | On request, Fimi can offer assistance of its technicians for: aligning and fixing of our machines - checking of electrical hydraulic and pneumatic connections between our machines - idle tests of machines.

SLITTER SHEAR CUTTING TABLE

Number of Cuts

Speed (m/min) 150

Material (N/mm2) 500 700

Thickness (mm)

0,50 30 30

1,00 30 27

1,50 16 14

2,00 9 8

2,50 6 5

3,00 4 4

3,50 4 4The number of cuts is theoretically calculated assuming uniformly distributed charges

METAL STRIPS | SHEET CUTTING LINES | TUBE MILLS FIMIMACHINERY.COM

F.I.M.I. - Fabbrica Impianti Macchine Industriali SpA Headquarters: via dell’Industria, 15 | 23897 Viganò (Lc) | ITALY T. +39 039 92141|F. +39 039 9272090|info@fimimachinery.com

METAL STRIPS | SHEET CUTTING LINES | TUBE MILLS FIMIMACHINERY.COM

F.I.M.I. - Fabbrica Impianti Macchine Industriali SpA Headquarters: via dell’Industria, 15 | 23897 Viganò (Lc) | ITALY T. +39 039 92141|F. +39 039 9272090|info@fimimachinery.com

METAL STRIPS | SHEET CUTTING LINES | TUBE MILLS FIMIMACHINERY.COM