multitool size 1-2 fitting slitting tools special
TRANSCRIPT
2021
1
• MULTITOOL• SIZE 1-2 • FITTING• SLITTING TOOLS• SPECIAL
TRU
MPF
STY
LETR
UM
PF S
TYLE
TRU
MPF
STY
LETR
UM
PF S
TYLE
TRU
MPF
STY
LETR
UM
PF S
TYLE
ADD-ONS PAG 1362
TRUMPF style
WHY SUCE?
The use of double grinding wheel plants allows for a very low roughness coeffi cient.
The machine tooling dept. includes automatic lines of turning with load bars and milling machines.
Thanks to our project department, with 3D CAD stations, we are able to design both standard and special tools.
The use of the best steel available on the market by SUCE tools ensures a high standard quality and a long tool life.
10,000 items available in stock divided into 20 different categories
No shape limitation thanks to EDM technology.
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
3
No shape limitation thanks to Wire EDM technology.
In warehouse: ready for delivery.
Wire EDM load-unload cell.
SUCE special ID number.
Manufacturing execution system.
Different lock-slug systems available
Tool testing: fault free.
ADD-ONS PAG 1364
TRUMPF style
DIE CLEARANCE
DIES LOCK SLUG
In case of blanking mild steel and stainless steel, clearance is 15% of material thickness.In case of blanking aluminum and copper clearance is 10% of material thickness.
MATERIAL
Thickness mm
Mild steel 16-20%
Stainless steel 18-24%
Aluminum 12-16%
Copper 10-14%
0.5 – 0.6 0.08-0.1 0.1- 0.12 0.06 – 0.08 0.05 – 0.06
0.8 0.14 – 0.16 0.15 – 0.2 0.1 – 0.14 0.08 – 0.1
1 0.16 – 0.2 0.18 – 0.24 0.12 – 0.16 0.1 – 0.14
1.2 0.2 – 0.24 0.24 – 0.3 0.15 – 0.2 0.12 – 0.15
1.5 0.25 – 0.3 0.27 – 0.35 0.18 – 0.24 0.15 – 0.2
2 0.34 – 0.4 0.36 – 0.45 0.24 – 0.3 0.2 – 0.25
2.5 0.45 – 0.5 0.45 – 0.55 0.32 – 0.35 0.25 – 0.3
3 0.5 – 0.6 0.6 – 0.7 0.35 -0.45 0.3 – 0.4
4 0.65 – 0.8 0.7 – 0.95 0.45 – 0.6 0.4 – 0.55
5 0.85 – 1 0.9 – 1.15 0.6 – 0.8 0.55 – 0.65
6 0.95 – 1.2 1.1 – 1.4 0.75 – 0.95 0.7 – 0.85
System E :3 cuts with different angles ensures the locking of the slug.
lock slug ASbest opt. th>3 mm
lock slug Ethick turret
B,C,D,E
lock slug Athick turret A
straight and conic
blank die
conic trumpf style
reduced land slitting die
Lock slug AS best option when thickness > 3 mm.
SUCE lock slug dies eliminate slug pulling. Slug pulling occurs when the slug returns to the top of the sheet during the stripping portion of the punching cycle. Because of this the slug comes between the punch and the top of the sheet on the next cycle, causing damage to the part and the tooling. How to avoid this problem?The SUCE NO-SLUG has been designed with a reduction point of the shape below the surface so the slug cannot return once it passes through this point.
Once the slug is separated from the punch, it is free to fall through the die. Slug pulling is eliminated. This solution isn’t suggested with slug exhaust system machines ; AS lock slug design with protrusions is best solution with thickness more than 3 mm, minimum cl for AS system is 0.15 mm. SUCE Lock slug E and A system is a standard for all Suce dies, AS is on request, reduced land is a standard for thick turret dies rt80x5 rt80x6 rt110x5 rt110x6.
Die clearance is the total space between the die and the punch.A correct clearance between the punch and the die ensures normal wear of the tool and punching without defects such as: burrs caused by excessive clearance and premature wearing of the tool and increased punching force in the case of clearance being too small.
AS E A S3 RL C
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
5
TOOLS SHARPENING
Before starting, make sure that punch and die cutting edge are in perfect condition. Accurate maintenance of the tools guarantees a normal wearing and the result of punching will be without residual burr and defects. Regular sharpening of the 0.1 mm punch and 0.2 mm die guarantees a constant life time of tooling.It is preferable that grinding operation is made with tangential grinding machine with adequate cooling in order to avoid tool tempering; after grinding it is necessary to demagnetize the tools with an appropriate demagnetizer. If a urethane ejectors is applied, restore the initial hole depth in such a way that the ejector can be compressed.
PUNCHING FORCE
Before starting ensure that punching force doesn’t exceed the capacity of punching machine.In order to calculate the punching force in kg, use the following formula:
Perimeter of the shape (mm) x thickness (mm) x 4/5 x shear strength *
* mild steel 40 - 50 kg/mm2 stainless steel 60 - 70 kg/mm2 aluminium 20 - 25 kg/mm2
A sharpening other than the flat one reduces both punching stress and punching noise.Therefore to ascertain the true punching force, multiply the pressure calculated using the above formula by the sharpening factor:
Sharpening height
Thickness (mm)
mm 1 - 1.5 2 3 4 5 6
1 0.75 0.9 1 1 1 1
1.5* 0.5 0.6 0.7 0.95 1 1
3** 0.5 0.5 0.5 0.6 0.7 0.75
* standard shear height thick turret style** standard shear height Trumpf style
Best option when shape is long,
but susceptibleto breakage
Best option when punching force
is high, punching surface 75%
Best option for nibbling but inverted stresses could cause breakage
Recommended only for blanking (turret
machine)
Recommended for round and square
PUNCHES ARE FLAT, ABOVE SHEAR ARE AVAILABLE UPON REQUEST; EACH TYPE OF SHARPENING REDUCES NOISE UP TO 50%
dB
Double valley Cod 3P
Roof top Cod V
Inverted roof top Cod VR
Whisper Cod W
Four ways Cod 4P
ADD-ONS PAG 1366
TRUMPF style
COATING
STRUCTUREMicro
Hardness (HV 0.05)
Friction coeffi cient(100 cr6)
Thickness (micron)
Deposition temperature
(°C)
Max temperature
(max°C)Colour
Single layer - <0.1 1 <150 - GREY
BASIC COMPOSITION
Coating Structure
Microhardness (HV 0.05)
Coeffi cient of friction against
(100 cr6)
µm thickness (microns)
Deposition Temperature
(°C)
Max Temperature
of use (max ° C)
Colour
Titanium carbonitride
Multilayer 3.500 0,5 1- 3 350 - 480 350 Pink
The double coating is obtained by overlaying the traditional TICN with Movic self-lubricating coating. The TiCN coating comes from an evolutionary study of the precursor TiN, inheriting the already appreciated qualities and improving some of its features.In fact, thanks to the introduction of the Carbon (C) within the layer, it was possible to obtain a structure that has a hardness greater than 50% compared to that of TiN.In consequence to this, the TiCN coating ensures a higher wear resistance.A further improvement of the TiCN was achieved by developing a “multilayer” (multi-layer) composed of several hundreds of different layers that give better control of structural stress within the coating. MOVIC is a self-lubricating and anti-adhesive coating based on MoS2 (Molybdenum), which is produced by PVD sputtering Magnetron technology. MOVIC has been developed in the aerospace to fi nd alternatives to traditional oils (eg oil, grease) when their use is not permitted and it has shown excellent tribological features that made it very interesting for a variety of new applications.
GEMINUS
PROBUSPROBUS ALCRN coating , features a unique nanostructure for a substantial decrease of internal stress; is tailored to withstanding cutting temperatures of up to 1050° C.A distinguishing feature of PROBUS coating is the improved wear performance at the cutting edge of the tool. Uniform distribution of mechanical forces in the vicinity of the cutting edge provides an additional advantage. This property puts PROBUS ahead of other coatings, making it excel in applications where similar AlCrN coatings provide only modest lifetime improvements.
STRUCTUREMicro
Hardness (HV 0.05)
Friction coeffi cient (100 cr6)
Thickness (micron)
Deposition temperature
(°C)
Max temperature
(max°C)Colour
Multilayer 3.000 0.5 2 - 4 450 - 500 1050 Grey
BASIC COMPOSITION
Deposition Technology
Microhardness(HV 0.05)
Coeffi cient of friction against
100 Cr 6
µm thickness (microns)
Deposition Temperature
(°C)
Max Temperature
of use (max ° C)
Colour
a-C:H sp2-sp3 PA-CVD 1.500 - 3.000 0,05 - 0,1 0,5 - 3 250 350 Black
COATING COPPER ALUMINUM MILD STEEL GALVANIZED STEEL
STAINLESS STEEL
PROBUS X X X XX XXXGEMINUS XX XX X XXX XXLEVATUS XXX XXX X X X
NEEDLESS RECOMMENDED HIGHLY RECOMMENDED
X XX XXX
DLC is an innovative carbon-based coating with wide spectrum of application which allows you to deal with problems related to abrasion, to chemical attack and sliding.The low deposition temperature , the hardness and the low coeffi cient of friction make it of extreme interest. It is applied on fi nished parts while maintaining the state of the surface fi nishing.The DLC is deposited by the PA-CVD (Plasma Assisted – Chemical Vapour Deposition) technology which allows to maintain low temperature of depositing and at the same time ensures an excellent adhesion.
LEVATUS
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
7
BEST TOOLS CAN ONLY BE FORMED OUT OF THE BEST STEEL
S600 Chemical composition
HSS - S600
M2 is the “standard” and most widely used industrial HSS. It has small and evenly distributed carbides giving high wear resistance, Tungsten-alloyed molybdenum high-speed steel with high hardness excellent cutting properties, outstanding compressive strength and good toughness.
CARBONIUM CHROMIUM MOLYBDENUM VANADIUM TUNGSTEN
0.90 % 4,10 % 5.0 % 1,80 % 3.50 %
D2 – K110
K110 is a high-carbon, high-chromium tool steel alloyed with molybdenum and vanadium characterized by: High abrasive wear resistance, High compressive strength, Good through-hardening properties, High stability in hardening and good resistance to tempering-back.D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties.It is heat treatable and will offer a hardness in the range 59-62 HRC
D2 K110 Chemical composition
CARBONIUM CHROMIUM MOLYBDENUM SILICIUM VANADIUM MANGANESE
1.55 % 11.30 % 0.75 % 0.30% 0,75 % 0.30 %
Tool users has been demanding higher and higher standards of their tools to prolong service life and reduce costs; the tool material itself, in addition to the tool design, is a success factor which is often under-appreciated. It can signifi cantly infl uence the tool life and therefore the cost effectiveness of your production.
For each of the demands of blanking and cutting, Bohler has an optimal solution in its product range.The range contains everything from standard materials to high-performance powder metallurgical steels.
LINE TRUMPF THICK TURRET SALVAGNINI MURATEC
PUNCH SIZE 0 HSS / PSM - - -
PUNCH ISODUR / PSM ISODUR / PSM ISODUR / PSM ISODUR
INSERT BLADES HSS / PSM HSS / PSM - -
DIE HWS / ISODUR HWS / ISODUR ISODUR / PSM HWS
Wea
r res
ista
nce
Toughness
BOHLER K110
BOHLER S600BOHLER K360
ISODUR
BOHLER S690MICROCLEAN
BOHLER K490MICROCLEAN
POWDER METALLURGY
ESR ISODUR
CONVENTIONAL
ISODUR
POWDER STEEL METALLURGY
A tough, “LONG DISTANCE RUNNER” with an optimum chemical composition
ESR electro slug remelting: a tried and tested remelting technology developed by Bohler gives the material the homogeneity it needs. A prerequisite for the best performance.ESR Manufacture improved service life due:
• Least possible inclusion content• Lower micro and macro segregation• Good homogeneity and higher degree of purity• A homogeneous structure throughout the entire cross-section and bar length• Producing larger bar dimensions at a constant carbide distribution• Uniform correction of dimensions• A broad range of application due to a high degree of toughness
Today Suce provides, in addition to the traditional HSS punches, of new variety of tools, Trumpf style and Thick turret style made in powder steel metallurgical.
K360 Chemical composition
Carbonium 1.25 %
Chromium 8.75 %
Molybdenum 2.70 %
Vanadium 1.18 %
The tough, wear resistance allrounder
abrasive wear resistance adhesive wear resistance
K360 1.2379 CONV. 8% CR steel
The new K360 isodur is a further development of the 8% chromium steels and has been developed to meet the needs of customers now more than ever. High toughness and, a remarkably high compressive strength, together with good resistance make this steel a real problem solver.This steel is particularly outstanding when adhesive and abrasive wear resistance are necessary; it allows a considerable increase in performance, your productivity will increase and your costs per part will be reduced.
Trumpf Gr1 B stationSmart, Mate
Wilson
Trumpf Multitool5 - 10
TrumpfGr0 D6 D10.5
In the catalogue POWDER STEEL PUNCHES are marked in RED, available items:
K490 Chemical composition
Carbonium 1.40 %
Chromium 6.40 %
Molybdenum 1.50 %
Vanadium 3.70 %
Tungsten 3.50 %
CPOH plus Chemical composition
Carbonium 1.0 %
Chromium 8.0 %
Molybdenum 2.50 %
Vanadium 0.3 %
One of them is K490.Research shows that the K490 Microclean, thanks to its chemical composition, is the best steel in the punching market. If you compare it with other powder steels, for example M4 and PM23, you will fi nd that it assures twice the toughness with the same wear resistance.
This new material is characterized by:• A high adhesive and abrasive wear resistance More hits between regrind operations increases
tool life, wear resistance double than traditional HSS M2
• A high toughness reduces risk of breaking the punch.
The fi rst sharpening
mild steel stainless steel
HSS PSM
0
500.000
HIGHEST METALLURGICAL
PURITY
FINESTCARBIDE
DISTRIBUTION
GOODDIMENSIONAL
STABILITY
HIGHDEGREE OFHARDNESS
MAXIMUMWEAR
RESISTANCE
HIGHERTOUGHNESS
HIGH COMPRESSIVE
STENGTH
Graphic shows nr of hits before fi rst sharpening punching mild and stainless steel with HSS and PSM tool . Tool tested square 6mm
Thick turretSmart staz.A
Wilson
Thick turret Mate ultra style
Trumpf bladeThick turret
Slitting blade
8
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
77
In order to optimize the use of tooling we would recommend the following basic guidelines:
a) the punching surface does not have to be lower than 60% of the used punch surface;
b) in case of nibbling minimum feed must be 0.5 x thickness, smaller rd punch with thickness 1 mm is 4 mm, smaller rd punch with thickness 2 mm is 6 mm, smaller rd punch with thickness 3 mm is 8 mm;
c) before exceeding tons capability calculate punching force with formula at page 5;
d) the tool dimension does not have to be lower than the material thickness and the shorter side must be at least 5% of the longest side;
e) the advantage of the technical improvements of some models of dies punching penetration should be at least 2.5 mm;
f) slitting tools must be appropriately sharpened and must have radius on corner (0.5 mm);
g) the use of the steels commonly called High Speed Steel for our punches allows the punching of any steel; however in order to increase considerably the punching effectiveness and reduce cold welds, apply some type of coating, see pag. 10 and use oil lubricant on sheet surface;
h) be sure that tooling cutting edge are without seizing or cold welding material; if any, remove them with a diamond file;
i) radius on punch corner is 0.25 mm;
j) delivery time: 2/3 days standard, 5/7 coating tools, some items are available at stock;
k) ordering specifications: machine type, form, thickness and material, dimensions, desired delivery.
GENERAL RULES TRUMPF STYLE TOOLING
MACHINE GROUP:
A:
CN700, CN900CN701, CN901
B:
CN 901E, CN902CS75, CS75,2
C:
CN1200S_ACS15, CS20,
CS20A, MP25_D
D:
TRUMATIC20, 20A, 202M
E:
SUN400 TRUMATIC150K, 151K, 152K,
180K, 1802K, 180KD,180LK, 202K, 225K235K, 300K, 400K
F:
TRUMATIC 150, 180W, 180R, 185, 240, 240R,
250, 260R
G:
TRUMATIC 20AW, 202W, 300W,
300LW, 300PW, 300TOP, 400W
H:
TRUMATIC500R, 200R, 190R, 600L
I:
TRUMATIC 1000R, 2000R, 2020R,
3000R, 5000R, 6000L, 7000
S:
MINIMATIC 100 TRUMATIC 120R, 160R
ADD-ONS PAG 13678
TRUMPF style
TRUMPF ROUND AND STANDARD SHAPE
SPECIAL A
TRT
TRS2R
TRS6
TRD1
TRD5
TRS10
TRS1
TRS3
TRS7
TRD2
TRD6
TRS11
TRS1R
TRS4
TRS8
TRD3
TRD7
TRS12
TRS2
TRS5
TRS9
TRD4
TRD8
C: A: A: R: A: B:
A: A:A: B:R:
A: B:C: D:
A: B:C: R1:
A: R1:R2:
A: B:
A: B:α: R:
A: R1:R2: R3:
A: B:R1: R2:R3: R4:
A: B:R1: R2:R3: R4:
A: B: C:D: E:R1: R2:
A: B:C:
A: C:
A: C: A: C:
A: B: A: B:
A: B:R:
Die key:Machine gr H, I Round 0° Std shape, Square S1, S1R 0° Machine gr A, B, C, D, E, F, GRound 0° Standard shape 0-90° Square S1, S1R 0-135°
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
79
SPECIAL B
SPECIAL C & CUSTOMIZED
TRF1
TRF5
TRC5
TRF9
TRF2
TRC2
TRF6
TRC6
TRF10
TRF3
TRC3
TRF7
TRC7
TRF11
TRF4
TRC4
TRF8
TRF12
A: B:R1: R2:R3: R4:
A: B:C: D:R1: R2:
A: B:C: D:E:
A: B:C: D:
A: R1:R2: R3:
A: B:R1: R2:
A: B:R1: R2:
A: B:R:
A: B:C:
A: B:C:
A: B:C:
A: B:C:
A: C:R:
A: B:C:
A: B:R:
A: B:R:
A: B:C:
A: B:C: R1:
A: B:C: D:
TRC1
Note:R<3 price is SPECIAL 2
ADD-ONS PAG 13680
TRUMPF style
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/2 1.5 - 76.2 mm
TRAEPLT0T TRAEPLT500T
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/2 1.5 - 76.2 mm
TRABPLTMT TRAEPLOMT
SIZEISODUR PUNCH Ø
mm * € Probus Geminus Levatus
0
Ø6 mis 1.5 - 6.0L59.5 TRA6PST006TL63 TRA6PSTL06T
PSML59.5 TRA6PST004TL63 TRA6PSTL04T
Ø10.5 mis 1.5 - 6.0L59.5 TRA105PST006TL63 TRA105PSTL06T
Ø10.5 mis 6.1 - 10.5L59.5 TRA105PST006TL63 TRA105PSTL06T
PSML59.5 TRA105PST004TL63 TRA105PSTL04T
1
1.5 - 30.0L74 TRA1PUT006TL77.5 TRA1PUTL06T
PSML74 TRA1PUT004TL77.5 TRA1PUTL04T
2
30.1 - 40.0L74 TRB2PUT006TL77.5 TRB2PUTL06T
40.1 - 51.0L74 TRC1PUT006TL77.5 TRC1PUTL06T
51.1 - 60.0L7 4 TRD1PUT006T**L77.5 TRD1PUTL06T**
60.1-76.2L74 TRE1PUT006T***L77.5 TRE1PUTL06T***
* Punch 0 HSS** not suitable with urethan stripper*** max Ø 70 mm with urethan stripper
ROUND
D
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force >20 tons
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 32 mm
TRA1MAT001T TRA1MAT006T
2 32.1 - 77.8 mm
TRE1MAT001T TRE1MAT006T
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
DIE
REINFORCED DUTY ISODUR DIE
Recommended when punching force > 15 tons
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
PUNCH
Punch size +1 mm
Stripper pin:NSP0600003016
STRIPPER
PUNCH 0 max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
PUNCH 0PUNCH 0PUNCH 0
mat. 40 kg/mmD6 max thickness 1.5 mmmat.60 kg/mmD10.5 max thickness 4 mmmat.40 kg/mmD10.5 max thickness 2 mmmat.60 kg/mmPunch grinding life 3 mm h 59,5
PUNCH 0
Shapes:TRT
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
81
Punch size +1 mm
Stripper pin:NSP0600003016
SQUARE
L
* Punch 0 HSS** not suitable with urethan stripper*** max diagonal 70 mm with urethan stripper
SIZEISODUR PUNCH L
mm * € Probus Geminus Levatus
0
1.0 - 4.2L59.5 TRA6PST006SL63 TRA6PSTL06S
PSML59.5 TRA6PST004SL63 TRA6PSTL04S
4.21 - 7.4L59.5 TRA105PST006SL63 TRA105PSTL06S
PSML59.5 TRA105PST004SL63 TRA105PSTL04S
1
1.5 - 21.0L74 TRA1PUT006SL77.5 TRA1PUTL06S
PSML74 TRA1PUT004SL77.5 TRA1PUTL04S
2
21.1 - 28.0L74 TRB2PUT006SL77.5 TRB2PUTL06S
28.1 - 35.0L74 TRC1PUT006SL77.5 TRC1PUTL06S
35.1 - 42.0L74 TRD1PUT006S**L77.5 TRD1PUTL06S**
42.1 - 53.8L74 TRE1PUT006S***L77.5 TRE1PUTL06S***
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force > 20 tons
Recommended radiuson corner 1 m
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
DIE
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
PUNCH
STRIPPER
max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
PUNCH 0
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 22 mm
TRA1MAT001Q TRA1MAT006Q
2 22.1 - 55 mm
TRE1MAT001Q TRE1MAT006Q
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/2 1.5 - 53.8 mm
TRAEPLT0S TRAEPLT500S
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/2 1.5 - 53.8 mm
TRABPLTMS TRAEPLOMS
Shapes:TRS1 - TRS1R
REINFORCED DIE ISODURGR1 TRA1MATP01S + €8,00GR2 TRC1MATR01S + €9,00
Recommended when punching force >15 tons Recommended radius on corner 1 mm
ADD-ONS PAG 13682
TRUMPF style
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force > 20 tons
Recommended radiuson corner 1 m
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
DIE
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
PUNCH
STRIPPER
max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
RECTANGLE
L
SIZEISODUR PUNCH L
mm * € Probus Geminus Levatus
0
1.0 - 5.9 L59.5 TRA6PST006A L63 TRA6PSTL06A
PSM L59.5 TRA6PST004A L63 TRA6PSTL04A
5.91 - 10.4 L59.5 TRA105PST006A L63 TRA105PSTL06A
PSM L59.5 TRA105PST004A L63 TRA105PSTL04A
1
1.5 - 30.5 L74 TRA1PUT006A L77.5 TRA1PUTL06A
PSM L74 TRA1PUT004A L77.5 TRA1PUTL04A
2
30.6 - 40.0 L74 TRB2PUT006A L77.5 TRB2PUTL06A
40.1 - 50.8 L74 TRC1PUT006A L77.5 TRC1PUTL06A
50.9 - 60.0 L74 TRD1PUT006A**L77.5 TRD1PUTL06A**
60.1 - 76.2 L74 TRE1PUT006A***L77.5 TRE1PUTL06A***
* Punch 0 HSS** not suitable with urethan stripper*** max diagonal 70 mm with urethan stripper
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 32 mm
TRA1MAT001S TRA1MAT006S
2 32.1 - 77.8 mm
TRE1MAT001S TRE1MAT006S
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/2 1.5 - 76.2 mm
TRAEPLT0S TRAEPLT500S
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/2 1.5 - 76.2 mm
TRABPLTMS TRAEPLOMS
PUNCH 0
OBROUND
LShapes:TRS2 - TRS2R - TRS3 - TRS4 - TRS5 - TRS6 - TRS7 - TRS8TRS9 - TRS10 - TRS11 - TRS12
Punch size +1 mm
Stripper pin:NSP0600003016
REINFORCED DIE ISODURGR1 TRA1MATP01S + €8,00GR2 TRC1MATR01S + €9,00
Recommended when punching force >15 tons Recommended radius on corner 1 mm
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
83
SPECIAL A
L
* Punch 0 HSS** not suitable with urethan stripper*** max diagonal 70 mm with urethan stripper
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
DIE
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
PUNCH
STRIPPER
max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
PUNCH 0SIZEISODUR PUNCH L
mm * € Probus Geminus Levatus
0
1.5 - 10.4 L59.5 TRA105PST006D L63 TRA105PSTL06D
PSM L59.5 TRA105PST004D L63 TRA105PSTL04D
1
1.5 - 30.5 L74 TRA1PUT006D L77.5 TRA1PUTL06D
PSM L74 TRA1PUT004D L77.5 TRA1PUTL04D
2
30.6 - 40.0 L74 TRB2PUT006D L77.5 TRB2PUTL06D
40.1 - 50.8 L74 TRC1PUT006D L77.5 TRC1PUTL06D
50.9 - 60.0 L74 TRD1PUT006D**L77.5 TRD1PUTL06D**
60.1 - 76.2 L74 TRE1PUT006D*** L77.5 TRE1PUTL06D***
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 32 mm
TRA1MAT001D TRA1MAT006D
2 32.1 - 77.8 mm
TRE1MAT001D TRE1MAT006D
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/21.5 - 76.2 mm
TRAEPLT0D TRAEPLT500D
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/21.5 - 76.2 mm
TRABPLTMD TRAEPLOMD
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force > 20 tons
Recommended radiuson corner 1 m
Shapes:TRD1 - TRD2 - TRD3 - TRD4 - TRD5 - TRD6 - TRD7 - TRD8
Punch size +1 mm
Stripper pin:NSP0600003016
REINFORCED DIE ISODURGR1 TRA1MATP01S + €8,00GR2 TRC1MATR01S + €9,00
Recommended when punching force >15 tons Recommended radius on corner 1 mm
ADD-ONS PAG 13684
TRUMPF style SPECIAL B
L
* Punch 0 HSS** not suitable with urethan stripper*** max diagonal 70 mm with urethan stripper
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
DIE
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
PUNCH
STRIPPER
PUNCH 0 max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
SIZEISODUR PUNCH L
mm * € Probus Geminus Levatus
0
1.5 - 10.4 L59.5 TRA105PST006C L63 TRA105PSTL06C
PSML59.5 TRA105PST004C L63 TRA105PSTL04C
1
1.5 - 30.5 L74 TRA1PUT006C L77.5 TRA1PUTL06C
PSML74 TRA1PUT004C L77.5 TRA1PUTL04C
2
30.6 - 40.0L74 TRB2PUT006C L77.5 TRB2PUTL06C
40.1 - 50.8 L74 TRC1PUT006C L77.5 TRC1PUTL06C
50.9 - 60.0 L74 TRD1PUT006C**L77.5 TRD1PUTL06C**
60.1 - 76.2L74 TRE1PUT006C***L77.5 TRE1PUTL06C***
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 32 mm
TRA1MAT001F TRA1MAT006F
2 32.1 - 77.8 mm
TRE1MAT001F TRE1MAT006F
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/21.5 - 76.2 mm
TRAEPLT0F TRAEPLT500F
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/21.5 - 76.2 mm
TRABPLTMF TRAEPLOMF
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force > 20 tons
Recommended radiuson corner 1 m
Shapes:TRC1 - TRC2 - TRC3 - TRC4 - TRC5 - TRC6 - TRC7 R>2.95
Punch size +1 mm
Stripper pin:NSP0600003016
REINFORCED DIE ISODURGR1 TRA1MATP01S + €8,00GR2 TRC1MATR01S + €9,00
Recommended when punching force >15 tons Recommended radius on corner 1 mm
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
85
SPECIAL CUSTOMIZED
L
* Punch 0 HSS** not suitable with urethan stripper*** max diagonal 70 mm with urethan stripper
DIE
STRIPPER
PUNCH 0SIZEISODUR PUNCH L
mm * € Probus Geminus Levatus
0
1.5 - 10.4 L59.5 TRA105PST006F L63 TRA105PSTL06F
PSM L59.5 TRA105PST004F L63 TRA105PSTL04F
1
1.5 - 30.5 L74 TRA1PUT006F L77.5 TRA1PUTL06F
PSM L74 TRA1PUT004F L77.5 TRA1PUTL04F
2
30.6 - 40.0 L74 TRB2PUT006F L77.5 TRB2PUTL06F
40.1 - 50.8 L74 TRC1PUT006F L77.5 TRC1PUTL06F
50.9 - 60,0L74 TRD1PUT006F**L77.5 TRD1PUTL06F**
60.1 - 76.2 L74 TRE1PUT006F***L77.5 TRE1PUTL06F***
SIZE HWS DIE € ISODUR DIE €
0/1 1.5 - 32 mm
TRA1MAT001F TRA1MAT006F
2 32.1 - 77.8 mm
TRE1MAT001F TRE1MAT006F
SIZE
STRIPPER GROUP
MACHINEE - F - G
€
STRIPPER GROUP
MACHINEH - I
€
0/1/21.5 - 76.2 mm
TRAEPLT0F TRAEPLT500F
SIZE
STRIPPER GROUP
MACHINES
€
STRIPPER GROUP
MACHINEHACO OMES
€
0/1/21.5 - 76.2 mm
TRABPLTMF TRAEPLOMF
GR1 max thickness 10 mmmat.60kg/mm2 ,Max 250 kNGR2 max thickness 12 mmmat.60kg/mm2, Max 180 kNDie grinding life 1 mmKey 0° round, standard
Machine without rotation*:Keys 0 - 90° standard shapeKeys 0 - 135° square* to specify
GR1 max thickness 10 mmMat 60kg/mm2
GR1 punching force 20 KN
GR2 max thickness 12 mmMat.60kg/mm2
GR2 punching force 30 KN*
Punch grinding life 3 mm h 74Punch grinding life 6.5 mm h 77,5*20 kN Whisper tool
max punching cap.50kND6 max thickness 2 mmmat. 40 kg/mm2
D6 max thickness 1.5 mmmat.60 kg/mm2
D10.5 max thickness 4 mmmat.40 kg/mm2
D10.5 max thickness 2 mmmat.60 kg/mm2
Punch grinding life 3 mm h 59,5Punch grinding life 6.5 mm h 63,0
HEAVY DUTY PUNCH WITH COLLAR Ø 40mm
Recommended when punching force > 20 tons
Recommended radiuson corner 1 m
Shapes:TRC1 - TRC2 - TRC3 - TRC4 - TRC5 - TRC6 - TRC7 R<2.95TRF1 - TRF2 - TRF3 - TRF4 - TRF5 - TRF6 - TRF7 - TRF8TRF9 - TRF10 - TRF11 - TRF12
PUNCH
Punch size +1 mm
Stripper pin:NSP0600003016
REINFORCED DIE ISODURGR1 TRA1MATP01S + €8,00GR2 TRC1MATR01S + €9,00
Recommended when punching force >15 tons Recommended radius on corner 1 mm
Coating
PROBUS MT6 € MT4 € MT5 € MT10 €
GEMINUS MT6 € MT4 € MT5 € MT10 €
LEVATUS MT6 € MT4 € MT5 € MT10 €
Coating
PROBUS REVO7-8 € REVO6 €
GEMINUS REVO7-8 € REVO6 €
LEVATUS REVO7-8 € REVO6 €
ADD-ONS PAG 13686
TRUMPF style
MULTITOOL
MT3 MT4 MT6MODEL TC500R, TC200R, TC190R, TC600LMax thickness 3.2 mm (40 kg/mm2) - 2 mm (60 kg/mm2)Punching force 55 KnPunch grinding life 0.2 mm DIE 1 mm
MT5 , MT10MODEL TC2000R, TC2020R, TC5000R, TC6000LMax thickness 4.5 mm (40 kg/mm2)Max thickness 3mm (60 kg/mm2)Mt5 max punching force 87 knMt10 max punching force 57 KnPunch grinding life 0.2 mm DIE 1 mm
MULTITOOL ITEM MT3 - MT6 € ITEM MT4 € ITEM MT5 € ITEM MT10 €
HSS PUNCH ROUND TRA0PUM606T TRA0PUM406T — —
ISODUR DIE ROUND TRA0MAM601T TRA0MAM401T — —
HSS PUNCH STANDARD SHAPE TRA0PUM606S TRA0PUM406S — —
ISODUR DIE STANDARD SHAPE TRA0MAM601S TRA0MAM401S — —
PSM PUNCH ROUND — — TRA0PUM504T TRA0PUM1004T
PSM DIE ROUND — — TRA0MAM504T TRA0MAM1004T
PSM PUNCH STANDARD SHAPE — — TRA0PUM504S TRA0PUM1004S
PSM DIE STANDARD SHAPE — — TRA0MAM504S TRA0MAM1004S
MT5MT4 MT6 MT10DIE HOLDER
DIE HOLDER ITEM € ITEM € ITEM € ITEM €
TRA0PMMT4 TRA0PMMT5 TRA0PMMT6 TRA0PMMT10
REVO 7-8REVO 7-8 REVO 6 REVO 6
REVOTOOL BOSCHERT 6, 7-8 POSITION
ITEMISODUR PUNCH
REVO 7-8 €ISODUR DIEREVO 7-8 €
ISODUR PUNCHREVO 6 €
ISODUR DIEREVO 6 €
ROUND TRA0PUM806T TRA0MAM801T BOA0PUM606T BOA0MAM606T
STANDARD TRA0PUM806S TRA0MAM801S BOA0PUM606S BOA0MAM606S
SPECIAL B TRA0PUM806C TRA0MAM801D BOA0PUM606C BOA0MAM606D
SPECIAL A TRA0PUM806D TRA0MAM801D BOA0PUM606D BOA0MAM606D
SPECIAL CUSTOMIZED TRA0PUM806F TRA0MAM801D BOA0PUM606F BOA0MAM606D
MT4 - 16 mmMT3 MT6 - 10.5 mm
MT5 - 16 mm MT10 - 10.5 mm
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
87
SLITTING TOOL
Max. Thickness 3 mm Radius on corner 0.5 mm
BLADE HOLDER 30x5 56x5 76.2x5 TO COMPLETE WITH ALIGNMENT RING
TRAFAATRALIGNMENT RING 40 mm
BLADE HOLDER 30x5 56x5 76.2x5 WITH INTEGRATED ALIGN.RING
ITEM € ITEM € ITEM €
TRCEPPL5690 TRAFAATR TR56/76PL
30 x 5 56 x 5 76.2 x 5
BLADE30X5 56X5 76.2X5
HSS € PSM € HSS € PSM € HSS € PSM €
RECT TR30LRE06 TR30LRE02 TR56LRE06 TR56LRE02 TR76LRE06 TR76LRE02
TRAP TR30LTP06 TR30LTP02 TR56LTP06 TR56LTP02 TR76LTP06 TR76LTP02
MICROJ TR30LMJ06 TR30LMJ02 TR56LMJ06 TR56LMJ02 TR76LMJ06 TR76LMJ02
30 x 5 56 x 5 76.2 x 5
BLADE PROBUS COATING
30X5 56X5 76.2X5
HSS + Probus €
PSM + Probus €
HSS + Probus €
PSM + Probus €
HSS + Probus €
PSM + Probus €
RECT TR30LRE06H TR30LRE02H TR56LRE06H TR56LRE02H TR76LRE06H TR76LRE02H
TRAP TR30LTP06H TR30LTP02H TR56LTP06H TR56LTP02H TR76LTP06H TR76LTP02H
MICROJ TR30LMJ06H TR30LMJ02H TR56LMJ06H TR56LMJ02H TR76LMJ06H TR76LMJ02H
30 x 5 56 x 5 76.2 x 5
BLADE GEMINUS COATING
30X5 56X5 76.2X5
HSS + Geminus €
PSM + Geminus €
HSS + Geminus €
PSM + Geminus €
HSS + Geminus €
PSM + Geminus €
RECT TR30LRE06F TR30LRE02F TR56LRE06F TR56LRE02F TR76LRE06F TR76LRE02F
TRAP TR30LTP06F TR30LTP02F TR56LTP06F TR56LTP02F TR76LTP06F TR76LTP02F
MICROJ TR30LMJ06F TR30LMJ02F TR56LMJ06F TR56LMJ02F TR76LMJ06F TR76LMJ02F
Coating
PROBUS€
GEMINUS€
LEVATUS€
56x5
76.2x5
ADD-ONS PAG 13688
TRUMPF style
TRD1PLPO56X5
TRCFAATP
TRD1PA56X5
TRE1PU76.2X5
TRE1PLPO76.2X5TRE1PA76.2X5
TRD1PU56X5 TRDEVI76.2X5
SLITTING TOOL30 x 5 56 x 5 76.2 x 5
ITEM € ITEM € ITEM €
DIE HOLDER (with shims) TRCEMAIN90 TRCEMAIN90 TRCFMAIN76TT
DIE HOLDER WITH BRUSHES (with shims) — — TRCFMAIN76BR
DIE SHIMS 1 SET INCLUDES 0.2 0.3 0.5 mm TRCEMAINSP56 TRCEMAINSP56 TRCEMAINSP76
56 x 5 76.2 x 576.2 x 556 x 5
SLITTING TOOL30x5 56x5 76.2x5
ITEM € ITEM € ITEM €
RECTANGLE HSS DIE INSERT ENTIRE MAX THICKNESS 2 mm TRCEIM30900 TRCEIM569006 TRCFIM76TT06
RECTANGLE PAIR HSS DIE INSERT MAX THICKNESS 3 mm — TRCEIM56P206 TRCFIM76P206
MICROJ HSS DIE INSERT ENTIRE MAX THICKNESS 2 mm TRCEIM309MI6 TRCEIM569MI6 TRCFIM76TMI06
SLITTING TOOL CLOSE TO DEFORMATION
Minimum distance to emboss: min 35mm H5, min 22 H2 URETHAN STRIPPER
ITEM56X5 max thickness 2.5 mm 76.2x5 max thickness 2 mm
ITEM € ITEM €
PUNCH ASSEMBLY TRD1PA56X5 TRE1PA76.2X5
PUNCH TRD1PU56X5 TRE1PU76.2X5
PAIR OF URETHAN STRIPPER TRD1PLPO56X5 TRE1PLPO76.2X5
PAIR OF SCREW TRDEVI76.2X5 TRDEVI76.2X5
ALIGNMENT RING SIZE2 TRCFAATP TRCFAATP
56 x 5 76.2 x 5SLITTING TOOL
Max. Thickness 3 mm Radius on corner 0.5 mm
30 x 5
30 x 5 - 56 x 6 76.2 x 5 76.2 x 5
Entire EntirePair PairEntire
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
89
FITTINGMACHINE GR E, F, G, H, I
MACHINE GR A, B, C, D BOSCHERT EUROMAC HACO
MACHINE GR S
ITEM € ITEM € ITEM €
ALIGNMENT RING SIZE 1 TRABAATI TRABAATITE
ALIGNMENT RING SIZE 2 TRCFAATP TRCFAATPTE
ALIGNMENT RING HD 40 mm TRAFAATR TRAFAATR
ALIGNMENT KEY TRAFAACHT0 NSP02MR08016
ALIGNMENT KEY RING HD TRAFAACHTR TRAFAACHTR
ALIGNMENT RING
TRCFAATPTETRABAATM
TRAFAACHT0TRC1AATM TRACAACHTM
TRCFAATP
* Only for machines group H, I
FITTINGMACHINE GR E, F, G, H, I
ITEM €
DIE ADAPTOR ALL MODELS SIZE 1/2 TRABPMT0
DIE ADAPTOR ALL MODELS SIZE 1/2 WITH BRUSHES TRABPMT0SP
DIE HOLDER SIZE 2 TRCEPMT0*
DIE ADAPTORTRCEPMT0TRABPMT0 TRABPMT0SP
PUNCH CHUCK
SHIM
FITTING ITEM € ITEM € ITEM €
PUNCH CHUCK D6 SIZE 0A - TRA6PPT0T D10.5 SIZE 0B - TRA105PPT0T SCREW M14 - MGR14MBX135
MGR14MBX135TRA6PPT0T TRA105PPT0T
TRAFAACHTR
TRABAATITETRABAATI
NSP02MR08016TRAFAATR
FITTING MT5 € MT10 € Size 1 € Size 2 €
DIE SHIMSmm
0,1 0,1 0,3 0,3
0,2 0,2 0,5 0,5
0,3 0,3 1 1
0,5 0,5 — —
ADD-ONS PAG 13690
TRUMPF style
TRAAP
GRINDING DEVICE 1TRSETAFFPM
GRINDING DEVICE 2TRSETAFFPM
GRINDING DEVICE 3TRSETAFFPM
GRINDING DEVICE 4TRSETAFFPM
TRAFFPU
GRINDING DEVICE 5TRSETAFFPM
GRINDING DEVICE 6TRSETAFFPM
TRAAP
FITTING ITEM €
PUNCH REGRIND VICE EQUIPMENT FLAT, WHISPER AND DOUBLE WHISPER TRAFFPU
FIXTURE REGRIND TOOLING DIE 1, DIE 2 PUNCH FLAT, WHISPER, DOUBLE WHISPER MULTITOOL PUNCH AND DIE TRSETAFFPM
SET STANDARD AND SPECIAL PUNCH WITH ALIGNMENT RING ANGLE: 0.45.90.135.180.225.270.315.360 TRAAP
URETHAN STRIPPER 82SHORE
STRIPPER ITEM € ITEM € ITEM € ITEM €
ROUND TRA1PLPOT TRB2PLPOT TRC1PLPOT TRE1PLPOT
STANDARD TRA1PLPOS TRB2PLPOS TRC1PLPOS TRE1PLPOS
SPECIAL A - B TRA1PLPOD TRB2PLPOD TRC1PLPOD TRE1PLPOD
30.6 - 40 mm0 - 30.5 mm 40.1 - 51 mm 51.1 - 70 mm
ADHESIVE PADS
ITEMTRAEAPT1 For stripper
TRAEAPT2For stripper
TRE1AMT1 For dies
TRE1AMT2 For dies
TRE1AMT3 For dies, die adaptor
TRE1AMT4For dies
€
TRE1AMT3TRE1AMT1TRAEAPT1 TRE1AMT4TRE1AMT2TRAEAPT2
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
91
SHELVE PUNCH DIE 1 DIE 2 STRIPPER
TRTCS1 TRTCS2 TRTCS3 TRTCS4
€
SHELVE ADAPTOR SET TOOL1 SET TOOL2 SIZE 0, RING, MULTITOOL
TRTCS5 TRTCS6 TRTCS7 TRTCS8
€
TOOL CABINETTRTCS160 PUNCHES 120 PUNCHES 2
TRTCS268 DIES 1
TRTCS330 DIES 2
TRTCS439 STRIPPERS
TOOL CARTRIDGE
TOOL CARTRIDGE
FITTING ITEM €
TOOL CARTRIDGE TRAECP
FITTING ITEM €
ADAPTOR FOR PRESS BRAKE MACHINE, PROMECAM STYLE TRAEAP
TRTCS512 DIE ADAPTORS4 SET
TRTCS184 PUNCHES SIZE 05 PUNCH CHUCKS44 MULTITOOL22 SLITTING TOOL
TRTCS69 SET TOOLS 1
TRTCS79 SET TOOLS 2
ADD-ONS PAG 136
COUNTER SINK DOWN
A:
D:
H:
S:
Machine Model:
Material:
EMBOSS UP ROUND
A:
B:
D:
H:
R1:
R2:
S:
Machine Model:
Material:
EMBOSS DOWN ROUND
A:
B:
D:
H:
S:
R1:
R2:
Machine Model:
Material:
FORM DOWN MARKING TOOL
A:
H:
S:
Machine Model:
Material:
EXTRUSION UP ROUND
D:
H:
R:
S:
Machine Model:
Material:
COUNTER SINK UP FORMING AFTER PRE PIERCE
A:
B:
D:
H:
R:
S:
Machine Model:
Material:
EMBOSS UP RECTANGULAR
A:
B:
L:
H:
R1:
R2:
R3:
S:
Machine Model:
Material:
A:
B:
C:
H:
R1:
R2:
R3:
S:
EMBOSS DOWN RECTANGULARMachine Model:
Material:
EXTRUSION DOWN ROUND
D:
H:
R:
S:
Machine Model:
Material:
COUNTER SINK DOWN FORMING AFTER PRE PIERCEMachine Model:
Material:
A:
D1:
D2:
H:
S:
92
TRUMPF style
FORMING TOOL DATA SHEET
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
93
FORMING TOOL DATA SHEET
Machine Model:
Material:A:
B:
H:
L:
I:
R1:
R2:
S:
BRIDGE UP
Machine Model:
Material:
A:
B:
C:
D:
H:
L:
R:
S:
LANCE UP_3 BENDS
Machine Model:
Material:
D:
H:
S:
KNOCK OUT UP
Machine Model:
Material:
B:
H:
S:
X:
CONTINOUS LOUVER
D:
H:
S:
SHEAR BUTTONMachine Model:
Material:
Machine Model:
Material:
D:
H:
S:
KNOCK-OUT DOWN
H:
S:
BEND 45°Machine Model:
Material:
H:
R:
S:
BEND 80°Machine Model:
Material:
H:
L:
S:
EMBOSS CONTINOUSMachine Model:
Material:
B:
H:
L:
S:
X:
Y:
12
60
5.5
0.8 - 2.5
18
70
LOUVER TRUMPFMachine Model:
Material:
B:
H:
L:
S:
X:
Y:
LOUVERMachine Model:
Material:
ADD-ONS PAG 13694
TRUMPF style
MARKING
COUNTERSINK AFTER PREPIERCE
ITEM PUNCH € DIE €
COUNTERSINK AFTER PRE PUNCH FLTRA09P TRA1MAT001T
ITEM PUNCH CHUCK € DIE €PUNCH
TH1 - 4.5 mm €PUNCH
TH5 - 8 mm €
MARKING TOOL TRA105PPT0T TRA1MAT001T FLTRA23P1 - 4.5 FLTRA23P4.5 - 8
3. PUNCH CHUCK2. MARKING PUNCH 1 - 4.5 mm2. MARKING PUNCH 5 - 8 mm1. DIE
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONS
A :
D:
H:
S:
Custom dimensions (mm)
A :
H:
Custom dimensions (mm)
Yes No
Order with prepierce tool:
Prepierce dimension: Dmax - [( Dmax - Dmin) * 0,7]
MARKING
3. PUNCH CHUCK
1 2 3
SCREWUpper Ø
mmThickness
mm
M3 7.1 1 - 3
M4 9.4 1.5 - 3
M5 11.7 1.5 - 4
M6 14 2 - 4
M8 18.5 2 - 4
SCREWUpper Ø
mmThickness
mm
M2.5 5.9 1 - 3
M3 6.7 1 - 3
M4 8.8 1.5 - 3
M5 10.6 1.5 - 4
M6 12.7 2 - 4
M8 16.7 2 - 4
MATERIAL TYPE
Thickness mm
H Maximum S%
Aluminum, Copper, Brass 0.8 - 5 95
Mild Steel, Galvanized
Steel
0.8 - 3 85
3.1 - 5 60
Stainless Steel
0.8 - 2 85
2.1 - 3 60
3.1 - 5 50
COUNTERSINK DATA
DIN EN ISO 10642 (hexagon socket)
COUNTERSINK DATA
DIN EN ISO 2009 and 7046-1
MAXIMUM COUNTERSINK DEPTH
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
95
EMBOSS UP
Sheet thickness 0.5 - 3 mmMaximum size with solid Die 60 mmMaximum size with Die with Springs 42 mm
ROUND PUNCH € SOLID DIE €DIE
ASSEMBLY €ALIGN.RING €
URETHAN STRIPPER
(OPT)€
0 - 15 mm FLTRB01BP FLTRB01MA (S1) FLTRB03MA TRABAATI FLTRB12E
15.1 - 23 mm FLTRB01B2P FLTRB01ME (S2) FLTRB03MA TRCFAATP FLTRB12EB2
23.1 - 30 mm FLTRB01CP FLTRB01ME (S2) FLTRB03MA TRCFAATP FLTRB12EC
30.1 - 42 mm FLTRB01DP FLTRB01ME (S2) FLTRB03MA TRCFAATP FLTRB12ED
42.1 - 60 mm FLTRB01EP FLTRB01ME (S2) FLTRB03MA TRCFAATP
SHAPE Diagonal
PUNCH € SOLID DIE €DIE
ASSEMBLY €ALIGN.RING €
URETHAN STRIPPER
(OPT)€
0 - 15 mm FLTRB02BP FLTRB02MA (S1) FLTRB04MA TRABAATI FLTRB12E
15.1 - 23 mm FLTRB02B2P FLTRB02ME (S2) FLTRB04MA TRCFAATP FLTRB12EB2
23.1 - 30 mm FLTRB02CP FLTRB02ME (S2) FLTRB04MA TRCFAATP FLTRB12EC
30.1 - 42 mm FLTRB02DP FLTRB02ME (S2) FLTRB04MA TRCFAATP FLTRB12ED
42.1 - 60 mm FLTRB02EP FLTRB02ME (S2) FLTRB04MA TRCFAATP
Solid Die sample “A” - min 90° Die with Spring sampleDie with Spring sample
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Custom dimensions (mm)ROUND/SHAPE :
A:
B:
D:
H:
L:
R1:
R2:
R3:
S:
ADD-ONS PAG 13696
TRUMPF style
COUNTERSINK UP FORMING AFTER PRE PIERCE
COUNTERSINK DOWN FORMING AFTER PRE PIERCE
Pre-pierce diameters (mm)Thickness 0.5: (M2.5 2.0) (M3 2.4) (M4 3.3) (M5 4.2) (M6 5.0) (M8 6.2) (M10 7.5)Thickness 1.0: (M2.5 2.2) (M3 2.6) (M4 3.5) (M5 4.4) (M6 5.2) (M8 6.5) (M10 7.8)Thickness 1.5: (M2.5 2.3) (M3 2.7) (M4 3.6) (M5 4.5) (M6 5.3) (M8 6.8) (M10 8.0)Thickness 2.0: (M2.5 2.4) (M3 2.8) (M4 3.7) (M5 4.6) (M6 5.4) (M8 7.0) (M10 8.2)Thickness 2.5: (M2.5 2.5) (M3 3.0) (M4 3.8) (M5 4.8) (M6 5.5) (M8 7.2) (M10 8.5)
Thread Upper Ø mm
M2.5 5.9
M3 7.1
M4 9.4
M5 11.7
M6 14
M8 18.5
M10 23
ITEM PUNCH € DIE ASSEMBLY € ALIGN.RING € SET
M2.5 M3 M4 M5 M6 FLTRB01BP FLTRB03MA (GR1)
M8 M10 FLTRB01B2P FLTRB03MA (GR2)
ITEM PUNCH € SOLID DIE € ALIGN.RING €
M2.5 M3 M4 M5 M6 FLTRB05BP FLTRB01MA (S1) TRABAATI
M8 M10 FLTRB05CP FLTRB05MA (S2) TRCFAATP
Pre-pierce diameters (mm)
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Direction: Up
A:
D1:
D2:
H:
S:
Custom dimensions (mm)
Yes No
Pre-hole tool needed:
Direction: Up
A:
D1:
D2:
H:
S:
Custom dimensions (mm)
Yes No
Pre-hole tool needed:
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
97
EMBOSS DOWN
Direction: Down
A:
B:
C:
H:
R1:
R2:
R3:
S:
Custom dimensions (mm)ROUND/SHAPE :
ROUND PUNCH €
URETHAN STRIPPER (optional)
€ DIE 2 €*** ALIGN.RING €
0 - 15 mm FLTRB05BP FLTRB12E FLTRB05MA (GR1)
15.1 - 30 mm FLTRB05CP FLTRB12EC FLTRB05MA (GR2)
30.1 - 42 mm FLTRB05EP FLTRB12ED FLTRB05MA (GR2)
SHAPE Diagonal PUNCH €*/**
URETHAN STRIPPER (optional)
€ DIE 2 €*** ALIGN.RING €
0 - 15 mm FLTRB06BP FLTRB12E FLTRB06MA (GR1)
15.1 - 23 mm FLTRB06B2P FLTRB12EB FLTRB06ME (GR2)
23.1 - 30 mm FLTRB06CP FLTRB12EC FLTRB06ME (GR2)
30.1 - 40 mm FLTRB06EP FLTRB12ED FLTRB06ME (GR2)
* GRINDED - ** MILLED - *** DIE WITH EJECTORS + €
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
ADD-ONS PAG 13698
TRUMPF style
CLUSTER
A:
B:
C:
D:
Round:
Shape:
Pattern: 1/2
Nx:
Ny:
Punch dimensions (mm):
SOLID WITH REPLACEABLE INSERTS
DIAM(mm)
A B C
L (mm) H (mm) L (mm) H (mm) D (mm)
II Ø 76 65 25 45 40 Ø 55
I Ø 30/38* - - - - -
* machine group S
If particular dimensions or holes are needed, our technical departiment is willing to find the solution that fits your needs.
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Elements n° X
*
AC
D
B
YEl
emen
ts n
°
1
*
A A
D
B
Y
B
C
XElements n°
Elem
ents
n°
2
A B C
MAX PUNCHING AREA
DL L
H H
Minimum size 1.5 x thickness. Minimum distance between rounds 2.5 thickness If size C <30 mm example 20 x 3 minimum distance between shapes 3 time thickness if size C >30 mm example 40 x 3 minimum distance between shapes 4 time thickness
*
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
99
* ROUND size mm2 - 3 - 4 - 5 -
6 - 7 - 810 - 12 15
Decimal value ex 3.2 max 11.9
Add each Ø € € € €
Spare punch HSS € € €
€
€
€
** SHAPE diagonal size mm
2_20 Square and rectangle
>20 Square and rectangle
2_20 Obround and hexagon
>20 Obround and hexagon
Add each shape € € € €
Spare punch HSS € € € €
DIAGONAL size mm 2 - 6 6.1 - 10 10.1 - 12 12.1 - 15 > 15.1
Coating Probus each Ø € € € € €
Coating Geminus each Ø € € € € €
ITEMSOLID PUNCH
H74SOLID PUNCH
H77.5 €ALIGNMENT
RING €
1.5 - 30 TRA1PUT006M TRA1PUTL06M TRABAATI
30.1 - 40 TRB2PUT006M TRB2PUTL06M TRCFAATP
40.1 - 50.8 TRC1PUT006M TRC1PUTL06M TRCFAATP
50.9 - 60 TRD1PUT006M TRD1PUTL06M TRCFAATP
60.1 - 76.2 TRE1PUT006M TRE1PUTL06M TRCFAATP
* STANDARD SHAPE € X QTYSOLID PUNCH SPECIAL 0-1-2 ADD € + IF PERIMETER <50 mm € X QTY, IF > 50 mm € X QTY
SOLID PUNCH
INSERTS STYLE
STRIPPER
DIE
SHAPE
ROUND
ITEMSTRIPPER MACHINES
GR E - F - GSTRIPPER MACHINES
GR H - I €
1.5 - 76.2 TRAEPLT0M TRAEPLT500M
ITEMINSERTS STYLE
- ROUND *INSERT STYLE
- SHAPE ** €ALIGNMENT
RING €
AREA 65X25 OR 45X40 FLTRB20PA FLTRB21PA TRAFAATR
INTEGRATED ALIGN.RING
VERSIONAREA Ø 55
FLTRB21IPA
ITEM DIE SIZE 1 €ISODUR DIE
SIZE 2 €
REINFORCED ISODUR DIE
SIZE 2 €
TRA1MATP06M TRE1MAT006M TRE1MATR01M
ADD 15% DIE AND STRIPPER SIZE < 3.5 mmADD 15% DIE AND STRIPPER SPECIAL 0, 1, 2 - ADD 20% DIE PERIMETER > 50 mm
ADD-ONS PAG 136100
TRUMPF style
LOUVER STANDARD 60 x 12 AND SPECIAL SIZE
Standard size 60 x 12 Technical info: Thickness: 0.8 ÷ 2.5 mmHeight : 5.5 mmSpacing X 18 mm, Y 70 mm
LOUVER SIZE: PUNCH ASSEMBLY € DIE ASSEMBLY € ALIGN.RING € SET
Standard 60 x 12 mm FLTRB14PA FLTRB14M (GR2)
Special size (max 70 mm) FLTRB14PB FLTRB14MB (GR2)
SPARES Upper revolving blade 60x12 PROBUS
Lower punch 60x12 PROBUS
CONTINUOUS LOUVER
PUNCH SIZE 24 x 12 mm Standard: L 12, H 5.5 Technical info: Thickness: 0.8 ÷ 2.5 mm,Height: 5.5 mm, Spacing minimum 20 mm
LOUVER SIZE: PUNCH € DIE ASSEMBLY € DIE ASSEMBLY € ALIGN.RING €
24x12 h 5.5 FLTRB13P FLTRB13M1 (GR1) FLTRB14MB (GR2)
FLTRB13M2 (GR2)
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Y:
X:
B:
H:
L:
S:
TRUMPF CUSTOMIZED DIM. (mm)
YesProbus Coating:
Y: 70
X: 18
B: 12
H: 5.5
L: 60
S: 0.8 - 2.5
TRUMPF STYLE DIM. (mm)
YesProbus Coating:
B:
H:
SPECIAL DIM. (mm)
S:
X:
YesProbus coating: No
TRUMPF STYLE TRUMPF CUSTOMIZE
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
101
EXTRUSION UP AFTER PRE.PIERCE
Sheet thickness 1 - 3 mm
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONS
D SIZE PUNCH €URETHAN STRIPPER € DIE ASSEMBLY € ALIGN.RING € SET
0 - 6 mm FLTRB12PB FLTRB12E FLTRB12M1 (GR1) (GR1)
6.1 - 9.40 mm FLTRB12PB FLTRB12E FLTRB12ME (GR1)
9.5 - 25 mm FLTRB12PC FLTRB12EC FLTRB12ME (GR2)
25.1 - 42 mm FLTRB12PE FLTRB12EE FLTRB12ME (GR2)
SPARES PUNCH 0 - 25 mm FLTRB12IP
PUNCH 25.1 - 42mm FLTRB12IPB
COATING GEMINUS 0 - 25 mm COATING GEMINUS 25.1 - 42 mm
ITEM PUNCH € DIE ASSEMBLY € ALIGN.RING € SET
FLTRB12PB FLTRB12M1 (GR1) (GR2)
Extrusion according to DIN7952Thread size M2.5 pre-punch diameter 1.0 mm, thickness 0.8 - 1.5, diameter hole 2.10 - 2.30*Thread size M3 pre-punch diameter 1.5/1.8 mm, thickness 0.8 - 1.5, diameter hole 2.55 - 2.80*Thread size M4 pre-punch diameter 2.0/2.3 mm, thickness 1.0 - 2.0, diameter hole 3.35 - 3.70*Thread size M5 pre-punch diameter 2.5/2.7 mm, thickness 1.0 - 2.0, diameter hole 4.25 - 4.65*Thread size M6 pre-punch diameter 3.0/3.3 mm, thickness 1.5 - 2.5, diameter hole 5.10 - 5.55*Thread size M8 pre-punch diameter 4.1/4.5 mm, thickness 1.5 - 2.5, diameter hole 6.80 - 7.40*Thread size M10 pre-punch diameter 5/5.5 mm, thickness 1.5 - 2.5, diameter hole 8.50 - 9.30*Extrusion tapping Height: 2 times thickness
*Hole size for tapping in machine.
YesGeminus coating: No
D:
H:
R:
S:
Custom dimensions (mm)
EXTRUSION UP 1 HIT
€€
ADD-ONS PAG 136102
TRUMPF style
STEPPING TOOL
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
LANCE UP
Sheet thickness 0.5 - 2.5 mm
SHEET THICKNESS0.5 - 2.5 mm
PUNCH € DIE ASSEMBLY €URETHAN STRIPPER €
ALIGN.RING € SET
1 - 2 BENDS FLTRB19P FLTRB19M FLTRB19E (GR2)
3 BENDS FLTRB193P FLTRB19-3M FLTRB19E (GR2)
RENFORCED FLTRB19PR FLTRB19MR FLTRB19E (GR2)
ANGLE PUNCH € DIE € ALIGN.RING € SET
45° FLTRB07P FLTRB02ME (GR2)
80° FLTRB07P80 FLTRB02ME (GR2)
YesProbus Coating: No
A:
B:
C:
D:
H:
L:
R:
S:
Custom dimensions (mm)
H:
R:
S:
Custom dimensions (mm)
H:
S:
Custom dimensions (mm)
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
103
SINGLE AND DOUBLE BRIDGE
Sheet thickness 0.5 - 2.5 mm
SIZE PUNCH* €URETHAN STRIPPER € DIE ASSEMBLY €
ALIGN.RING € SET
0 - 18 mm FLTRB17P1 FLTRB17-18E1 FLTRB17M (GR1)
18.1 - 40 mm FLTRB17P2 FLTRB17-18E2 FLTRB17M (GR2)
0 - 18 mm DOUBLE FLTRB18P1 FLTRB17-18E1 FLTRB18M (GR1)
18.1 - 40 mm DOUBLE FLTRB18P2 FLTRB17-18E2 FLTRB18M (GR2)
Yes
DOUBLE
Geminus Coating:
TYPE:
No
SINGLE
A:
B:
H:
S:
I:
R1:
R2:
Custom dimensions (mm)
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
PUNCH WITH EJECTOR + €
ADD € PUNCH, € DIE
ADD-ONS PAG 136104
TRUMPF style
BEADING CONTINUOUS TOOL
Thickness 0.8 - 3 mm Height 2, 3, 4, 5 mm, Feed 1 - 2 mm
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
ITEM PUNCH € DIE GR2 € ALIGN.RING € SET
BEADING
CONTINUOS TOOL
EMBOSS PUNCH
FLTRB29P
EMBOSS SOLID DIE
FLTRB29M(GR2)
BEADING
CONTINUOS TOOL
EMBOSS DIE WITH
SPRINGS FLTRB29M2
WHEEL TOOLWHEEL PUNCH
FLTRB29P2
WHEEL DIE
FLTRB29M3
RIB TOOL
Thickness 0.8 - 2.5 Aluminium, 0.8 - 2 Mild steel, 0.8 - 1.5 Stainless steel Minimum radius 25 mmWidth 5 - 6 mm
H:
S:
L:
Custom dimensions (mm)
DIE WITH SPRINGS
SOLID DIE
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
105
SHEAR BUTTON
Thickness 1 - 3 mm Height 0.5 x thickness
KNOCK OUT ROUND
Sheet thickness 1 - 2 mm
D:
H:
S:
Custom dimensions (mm)
SHEAR BUTTON PUNCH €URETHAN STRIPPER €
DIE ASSEMBLY
GR1€ ALIGN.RING € SET
D 1.9, 2.9, 3.9, 4.9, 5.9 FLTRB15BP FLTRB12E FLTRB15M1 (GR1)
D SIZE PUNCH € DIE ASSEMBLY €URETHAN STRIPPER € ALIGN.RING € SET
0 - 8 mm FLTRB15PB FLTRB15M1(GR1) FLTRB15E (GR1)
8.1 - 15 mm FLTRB15PB FLTRB15M2B FLTRB15E (GR1)
15.1 - 25 mm FLTRB15PC FLTRB12M2C FLTRB15EC (GR2)
25.1 - 42 mm FLTRB15PE FLTRB12M2E FLTRB15EE (GR2)
D:
H:
S:
Custom dimensions (mm)
Company:
Machine model:
Material:
Thickness :
Order / Offer :
Item required:
Number of previous order:
ORDERING SPECIFICATIONSNotes and personal drafts. Please specify here the distance of any close deformation.
DOUBLE + € TRIPLE + €
ADD-ONS PAG 136106
TRUMPF style
CARD GUIDE
CARD GUIDE PUNCH € DIE ASSEMBLY € ALIGN.RING € SET
0 - 60 mm FLTRB34P FLTRB34M (GR2)
THREAD FORM AFTER PRE PIERCE
Sheet thickness 0.8 - 1.5 mm
THREAD FORM AFTER PRE PIERCE
PUNCH € DIE € ALIGN.RING € SET
FLTRB31P FLTRB31M (GR1)
Thread Pitch Thickness
3.3 1.3 0.8 - 1.2 mm
3.5 1.3 0.8 - 1.2 mm
3.9 1.4 0.9 - 1.3 mm
4.2 1.4 0.9 - 1.3 mm
4.8 1.6 1 - 1.5 mm
Thread
DEBURRING AND MARKING ENDLESS
HOLDER DEBURRING ASSEMBLY WITH
SPHEREPUNCH €
DIE ASSEMBLYWITH SPHERE € ALIGN.RING € SET
FLTRB35PD FLTRB35M (GR2)
HOLDER MARKING
PUNCH €DIAMOND 120°
(MS. SS) €DIAMOND 150°
(AL - GA) €DIE ASSEMBLYWITH SPHERE €
ALIGN.RING €
FLTRB35PM FLTRB35D120 FLTRB35D150 FLTRB35M (GR2)
ADD-ONS PAG 136
2021
TRU
MP
F st
yle
107
MARKING TOOL ALPHA NUMERIC
MARKING TOOL ALPHA NUMERIC
PUNCH HOLDER € DIE € ALIGN.RING € SET
FLTRB26PR FLTRC1MAT001T (HD 40 mm)
MARKING GROUND SYMBOL DIN40011
Marking Depth: 0.4 - 0.6 mm
MARKING DEPTH: 0.4 - 0.6 mm
PUNCH € DIE € ALIGN.RING € SET
From the top FLTRB27P TRA1MAT001T (GR1)
From the bottom TRA1PUT006T FLTRB27M (GR1)
FORMED STAMPING LOGO
FORMED STAMPING LOGO
PUNCH € DIE € ALIGN.RING € SET
EMBOSSED FLTRB26P FLTRB26M (GR2)
MARKED FLTRB26P FLTRC1MAT001T (GR2)
Embossed Logo Marked Logo
ADD-ONS PAG 136108
TRUMPF style
ADD ON
Shear option
TYPE OF SHEAR
Roof top Inverted roof top Double valley Whisper Four ways
WHEN
Best option when punching force is high, minimum feed 75% of tool lenght
Recommended for nibbling at maximum tonnage but inverted stress could cause breakage
Recommended when punch is longer than 80mm But inverted stress could cause breakage
Best option classic trumpf style to reduce noise and tonnage, max 5°
Recommended for punching and nibbling Ø and square at maximum tonnage
CODE Cod V Cod VR Cod 3P Cod W Cod 4P
ADD ON € € € € €
Add on
Die clearance <0.1 Punch width size <1.5 Die size <1.5 1,51 < Die size < 2,2
ADD ON +25 % +25 % +25 % +10 %
< 0,05
< 1,5
< 1
,5
<Ø1,5 1,51<S<2,2
1,51
<S <
2,2
Die lock slug Extra Key slotBack taper punch / Jump station*
Reduced milled land
ADD ON € € + 20% €
WHEN
Best option to prevent the come out of the slug
Special, machines without rotation (C-D-E thick turret dies keys 0-90 standard shape 0-135 square)
Recommended for punching thick material, more than 4mm. Needful with punches that work with urethane *Thick turret punches example: square10 in C station
To facilitate the fall of the slug; recommended when long side is more than 20 times short side, ex re22x1