skmm 1922 basic manufacturing processes 1 · basic manufacturing processes 1 skmm 1922. 2 ......

BASIC MANUFACTURING PROCESSES 1

SKMM 1922

2

Salam Sejahtera

Contents

1. Materials in manufacturing

2. Manufacturing processes

3

1. Materials in Manufacturing

4

• Most engineering materials can be classifee into one of three basic categories:

1. Metals

2. Ceramics

3. Polymers

• Their chemistries are eiferent, their mechanical ane physical propertes are eissimilar, ane these eiferences afect the manufacturing processes that can be usee to proeuce proeucts from them

Engineering Materials

5

FIGURE 1.4 An outline of engineering materials

What is Manufacturing?

• Manufacturing as an economic process– Manufacturing is the transformaton of materials into items

of greater value by means of one or more processing ane/or assembly operatons

– Manufacturing adds value to the material by changing its shape or propertes, or by combining it with other materials that have been similarly alteree

6

2. Manufacturing Processes

Two basic types:

I. Processing operatons - transform a work material from one state of completon to a more aevancee state– Operatons that change the geometry,

propertes, or appearance of the startng material

II. Assembly operatons - join two or more components in oreer to create a new entty

7

I. Processing Operatons

• Alters a workpart's shape, physical propertes, or appearance in oreer to aee value to the material

Three categories of processing operatons:

1. Shaping operatons - alter the geometry of the startng work material

2. Property enhancing operatons ‑ - improve physical propertes of the material without changing its shape

3. Surface processing operatons - performee to clean, treat, coat, or eeposit material onto the exterior surface of the work

8

Shaping Operaton – Four Categories

1. Solidifcaton processes - startng material is a heatee liquid or semifuid that solieifes to form part geometry

2. Partculate processing - startng material is a powder, ane the poweers are formee into eesiree geometry ane then sinteree to hareen

3. Deformaton processes - startng material is a ductle solid (commonly metal) that is eeformee

4. Material removal processes - startng material is a solid (euctle or britle), from which material is removee so resultng part has eesiree geometry

9

Assoc Prof Zanal Abidin Ahmad 10

4 Major Manufacturing

Processes

Classification of Manufacturing Processes

1. Solidifcaton Processes • Also known as castng process • Startng material is heatee sufciently to transform it

into a liquie or highly plastc state • Examples: Castng for metals, moleing for plastcs

11

Nov 23, 2017 12

Parts Maee by Castng

Nov 23, 2017 13

Parts Maee by Castng

2. Partculate Processing

• Also known as poweer metallurgy process

• Startng materials are poweers of metals or ceramics

• Usually involves pressing ane sintering

14

15

PARTS MADE FROM POWDER METALLURGY PROCESS

3. Deformaton Processes • Also known as metal forming processes• Startng workpart is shapee by applicaton of forces that

exceee the yiele strength of the material• Examples: (a) forging, (b) extrusion

16

Bulk Metal Forming Parts

November 23, 2017 18

Sheet Metal Forming Parts

4. Material Removal Processes • Usually known as machining processes

• Excess material removee from the startng workpiece so what remains is the eesiree geometry

• Examples: machining such as turning, erilling, ane milling; also grineing ane nontraeitonal processes

Nov 23, 2017 Assoc Prof Zanal Abidin Ahmad 19

Machining Parts

Nov 23, 2017 Assoc Prof Zanal Abidin Ahmad 20

II. Assembly Operatons

Two or more separate parts are joinee to form a new entty

Types of assembly operatons:1. Joining processes – create a permanent joint.

• Examples: welding, brazing, soldering, and adhesive bonding

2. Mechanical assembly – fastening by mechanical methoes

– Examples: use of screws, bolts, nuts, other threaeee fasteners; press fing, expansion fts

Nov 23, 2017 Assoc Prof Zanal Abidin Ahmad 21

Various type of joining and welding processes

Assoc Prof Zanal Abidin Ahmad 22

Mechanical assembly and

fasteners

Nov 23, 2017 Assoc Prof Zanal Abidin Ahmad 23

Methods of Making a Simple Part

Various methoes of making a simple part. (a) castng or poweer metallurgy, (b) forging or upseing, (c) extrusion, (e) machining, ane (e) joining two pieces.

24