simplified design of strip foundation (shallow foundation)
Post on 18-Dec-2021
18 Views
Preview:
TRANSCRIPT
Simplified design of strip foundation (shallow foundation)
Codes: DS/EN 1997-1 Eurocode 7: 2005 Geotechnical design - Part 1: General Rules
DS/EN 1997-1-1 DK NA:2015
DS/EN 1997
Undrained conditions (clay), can be simplified to:
R/B = ( +2) Cd + qππππ R = load [kN/m]
B = nessesary width of foundation pr running m.
Cd = design shear strength of clay (geo-report)
q = load on soil at buttom level of foundation next to foundation (overburden)
Example:
= Density of soil (geo-report)γγγγ
Cv = Shear strength of clay(geo-report)
q1
q1 is weight of soil to the left of the foundation.
q2 is the weight of the basement floor and sand to the right of the fundation.
q2
Lowest value of q1 or q2 is used (can be omitted)
≔R ⋅200 ――kNkNkNkN
mmmmLoad at foundation level (underside)
≔Cv ⋅135 ――kNkNkNkN
mmmm2
Shear strength of the clay from geo-report
≔γγγγcccc 1.8 Safety parameter of shear strength, 1997 DK NA
≔q1 ⋅60 ――kNkNkNkN
mmmm2
≔q2 ⋅10 ――kNkNkNkN
mmmm2
≔q min ⎛⎝ ,q1 q2⎞⎠ =q 10 ――kNkNkNkN
mmmm2
≔Cd ―Cv
γγγγcccc=Cd 75 ――
kNkNkNkN
mmmm2
≔B ―――――R
+⋅(( +ππππ 2)) Cd q=B 0.506 mmmm Nessesary width of foundation
DS/EN 1997
DK NA
Drained conditions as for sand, can be simplified to
R/B = +⋅⋅⋅0.5 γγγγ B NγNγNγNγ ⋅q Nq q can be omitted
≔ϕ 35 degdegdegdeg (geo-report) ≔γϕ 1.2 Safety factor for angle of friction from DK NA
≔ϕd atan⎛⎜⎝―――tan((ϕ))
γϕ
⎞⎟⎠
=ϕd 30.264 degdegdegdeg Used to find N and Nq from tableγγγγ
≔γγγγ ⋅18 ――kNkNkNkN
mmmm3
Density of soil from geo-report
≔Nγ 15 ≔Nq 18 From tables or spread sheet
Guess a dimension ≔B ⋅0.72 mmmm Continue guessing until the numbers are almost equal or solve the equation.
=―R
B277.778 ――
kNkNkNkN
mmmm2
≔X +⋅⋅⋅0.5 γγγγ B Nγ ⋅q Nq =X 277.2 ――kNkNkNkN
mmmm2
top related