school of medicine multipurpose room control systemmicrosoft word - edited_mpr control system.docx...
Post on 28-Mar-2021
1 Views
Preview:
TRANSCRIPT
School of Medicine Multipurpose Room Control System
1
To report a problem with the system please contact the Help Desk @ 463-‐7777.
DVD/VCR
Environment
To get started press the touch panel. You can then choose any of the available sources (Laptop, Computer, DVD/VCR, etc.) displayed on the source selection bar by swiping left and right and then dragging it into the black space below the options. NOTE: The touch panel is programmed to control rooms based on the placement of the room dividers between rooms 104, 105, and 106.
Dragging DVD/VCR or Bluray into the black space will enable it and the master controls will appear for the feature. Below is an example of the controls for the DVD/VCR source.
Press Environment to access lighting controls, shade controls, projector controls, and the projector screen.
Depending on the lighting control option, the shades may change configuration as well to accommodate the chosen lighting control.
2
To report a problem with the system please contact the Help Desk @ 463-‐7777.
Exiting the System
There are two layers of shades – solar and blackout that can be controlled through the shade controls screen.
Projector Screen usage can be controlled through this screen.
Tap Exit and then Continue to shut down the system. The system will now power off.
Projector usage can be controlled through this screen.
top related