pw220-7 - komatsu latin america - komatsuklc.com1].pdf · with its newly developed komatsu ecot3...
Post on 31-Jan-2018
215 Views
Preview:
TRANSCRIPT
PW220-7
HY
DR
AU
LIC WH
EELED EX
CAV
AT
OR
PW220
NET HORSEPOWER125 kW 168 HP @ 2.000 rpm
OPERATING WEIGHT19.490 - 23.980 kg
BUCKET CAPACITYmax. 1,68 m³
PW220-7
2
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
WALK-AROUND
The PW220-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets,
it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsu’s
exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance
that’s always perfectly matched to the task.
Excellent reliability and durability
• Reliable major components designed
and built by Komatsu
• Exceptionally reliable electronic de-
vices
Advanced Attachment Control
The PW220-7 is equipped to handle a wide variety
of attachments. The advanced attachment control
system features:
• Operator selectable hydraulic fl ow control
• Adjustable presets for rapid attachment
changeover
• Attachment piping options for breaker, clamshell
or crusher
Undercarriage
• Designed for high ground clearance
• Virtually zero axle rocking with out-
board wet disc system
• Powerful drawbar pull
• Automatic 3-speed travel
• 35 km/h maximum travel speed
• Standard undercarriage width: 2,75 m
High productivity
• High lifting capacity and good stability
• High drawbar pull
• Large bore bucket cylinders can be installed to the
1,8 m and 2,4 m arms to greatly increase digging
forces and productivity in tough conditions.
Komatsu Tracking System
Track and monitor your machine anytime,
anywhere for total peace of mind.
3
PW220-7HYDRAULIC WHEELED EXCAVATOR
NET HORSEPOWER
125 kW 168 HP
OPERATING WEIGHT
19.490 - 23.980 kg
BUCKET CAPACITY
max. 1,68 m³
SpaceCab™
• Sealed and pressurised cab with standard climate control
• Low-noise design
• Low-vibration design with viscous cabin damper mounting
• Cab moved forward for better visibility
• Ergonomic control levers
• Seat specially designed for wheeled machines,
with exceptional extra comfort
In harmony with the environment
• The economy mode reduces fuel consumption
• Low operating noise
• Designed for easy end-of-life recycling
The Komatsu SAA6D107E-1 engine
meets EU Stage IIIA and EPA Tier III
emission regulations.
9
4
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
EMMS
EMMS (Equipment Management and Monitoring System)The EMMS is a highly sophisticated system, controlling and monitoring all the excavator func-
tions. The user interface is highly intuitive and provides the operator with easy access to a huge
range of functions and operating information.
Four working modes
The PW220-7 is equipped with three working modes: (P, E, B), plus a lifting mode (L). Each mode is designed to
match the engine speed, pump speed, and system pressure with the current operating requirement. This provides
the fl exibility to match equipment performance to the job at hand.
1 Working mode select
2 Creep speed
3 High/low speed select
4 Control lever lock
5 Menu select key
6 Service menu
7 Engine auto deceleration
8 Buzzer cancel
9 Brightness adjust
10 Suspension auto lock
11 Suspension lock
12 Accept key
13 Scroll down
14 Scroll up
15 Undo switch
16 Rear left outrigger/blade
17 Front left outrigger/blade
18 Front right outrigger
19 Rear right outrigger
On-screen symbols
Push-button control switches
17
16
18
19
6
2
4 3
15
14
13
12
5
7
8
10
11
1
3
5
4
9
14
2
7
6
8
12
11
13
10
1
1 Working mode
2 Service meter and clock
3 Engine water gauge
4 Engine water temperature warning
5 Hydraulic oil gauge
6 Hydraulic oil temperature warning
7 Fuel gauge
8 Fuel low level warming
9 Travel direction
10 Travel mode
11 Auto deceleration
12 Suspension lock
13 Swing lock
14 Swing position
5
PW220-7HYDRAULIC WHEELED EXCAVATOR
Password screen
Power mode
For maximum power and
fast cycle times. Normally
used for heavy operations
such as hard digging and
loading. This mode allows
access to the ‘PowerMax’
function to temporarily
increase the digging force
by 7% for added power in
tough situations.
Economy mode
The environmentally-
friendly mode. For run-
ning more quietly during
operations at night and/or
in urban areas. Fuel
consumption and exhaust
emissions are reduced.
Breaker mode
Delivers optimal hydrau-
lic pressure, fl ow and
engine RPMs for powerful
breaker operations.
Lifting mode
Increases the lifting ca-
pacity 7% by raising the
hydraulic pressure. This
mode supports safe lifting
operations.
Working mode Application Advantage
P Power mode • Maximum production/power
• Fast cycle times
E Economy mode • Excellent fuel economy
B Breaker mode • Optimum engine RPMs and hydraulic fl ow
L Lifting mode • Hydraulic pressure has been increased by 7%
Hydraulic fl ow general adjustment
screen in B (breaker) mode
Fine tune hydraulic fl ow adjustment
screen in B (breaker) mode
Fine tune hydraulic fl ow adjustment
screen in P (power) or E (economy)
mode
Easy to see and easy to use
Superb recognition colour LCD screens for each mode. Letters and numbers are
combined with colour images for exceptionally clear and easy-to-read information.
The high-resolution screen is easy to read in bright sunlight and in all lighting condi-
tions.
Automatic three-speed travel
The travel speed is automatically shifted from high to low speed, according to the
ground conditions.
Fingertip hydraulic pump oil fl ow adjustment
From the LCD monitor, you can automatically select the optimal hydraulic pump oil
fl ow for breaking, crushing, and other operations in the B, P or E modes. Also, when
simultaneously operating with attachments and work equipment, the fl ow to the at-
tachment is reduced automatically, thus delivering a smooth movement of the work
equipment.
Password protection
Prevents unauthorised machine use or transport. The engine cannot be started with-
out your four-digit use or password.
For total security, the battery is connected directly to the starter motor. Both the
starter and the engine need the password.
The password can be activated and deactivated upon request.
High Low Auto Creep
Travel speed 35 km/h 9 km/h 0 - 35 km/h 1,5 km/h
6
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
WORKING ENVIRONMENT
Outer air fi lter
Easy removal/installation of the air conditioner fi lter ele-
ment, without tools facilitates easier cleaning.
Climate controlLarge sun roof with integrated
sun shade
12-Volt power supply and
(optional) radio cassette
Tiltable steering wheel with
several functions; wiper control,
indicator, horn, and head lights
PW220-7’s cab interior is spacious
and provides a comfortable working
environment…
Pressurised cab
The standard-equipped climate control, air fi lter
and a higher internal air pressure resist dust entry
into the cab.
Low-noise design
Noise levels are substantially reduced; engine
noise as well as swing and hydraulics operations
noise.
Cab damper mounting for low vibration
levels
PW220-7 uses a new and improved viscous
damping cab mount system that incorporates a
longer stroke plus an added spring. The new cab
damper mounting, combined with strengthened
left and right-side decks, aids the reduction of
vibrations to the operator’s seat.
Rubber
Spring
Silicone oil
Comfortable cab
The new PW220-7 inner cab volume is 14% great-
er than the Dash 6 models, offering an exception-
ally comfortable operating environment. The large
cab enables the seat, with headrest, to be reclined
to horizontal.
SpaceCab™
7
PW220-7HYDRAULIC WHEELED EXCAVATOR
Joysticks with propor-
tional control button
for attachments
Defroster/demister
Hot and cool box
Seat sliding range:
340 mm
Multi-position controls
The multi-position, proportional pressure control
levers allow the operator to work in comfort whilst
maintaining precise control. A double-slide mech-
anism allows the seat and controllers to move
together, or independently, allowing the operator
to position the controllers for maximum productiv-
ity and comfort.
Safety features
Thermal guard
Large handrail for
safe access
Improved, wide visibility
The right side window pillar has been removed and the
rear pillar reshaped to provide greater visibility.
Blind spots have been decreased by 34%.
Pump/engine room partition
This prevents hydraulic oil from spraying onto the
engine to reduce the risk of fi re.
Thermal and fan guards
Are placed around high-temperature
parts of the engine.
Steps with non-skid surface and large handrail
Steps with non-slip surfacing ensure safer
maintenance.
Non-slip sheet
8
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
FLEXIBILITY
ARMS BOOMS
Mono boom
Two-piece boom
1.800 mm
5.700 mm
5.410 mm
2.400 mm
Outriggers
Independently controlled outriggers are optionally available on
both, the front and rear of the machine. The cylinder protections
are standard on the outriggers.
2.900 mm
Additional hydraulic circuits
A 2-way additional hydraulic circuit, electrically controlled from the
wrist control levers, is fi tted as standard.
3.500 mm
9
PW220-7HYDRAULIC WHEELED EXCAVATOR
The PW220-7 can be specifi ed with an enormous range of work
equipment and undercarriage attachments to meet the needs of
almost any application.
Toolbox
Tough, secure toolbox, integrated in the mudguards. Optionally
fi tted on both sides of the undercarriage.
Dozer blade
A parallel blade is available with standard cylinders protector for
both the front and rear of the machine.
Dimensions: 2.750 mm × 520 mm
Attachments commonality & functionality
The stabilizer and dozer blade are interchangeable, and there-
fore can be attached on the front or rear of the chassis. The sta-
bilizer and dozer blade are controllable from the monitor panel.
The monitor panel has four buttons that allow individual attach-
ment operation as well as collective operation.
220
10
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
EASY OPERATION
As well as operating the standard work equipment movements, the RH wrist control lever is also used to oper-
ate the undercarriage. When used in conjunction with the selection switch on the control panel, full independent
control of outriggers and dozer blade is immediately available. This feature, together with the automatic axle lock,
enables the machine to be moved, stabilized and operated extremely quickly.
Breaker controlUsed for breaker operation when
B mode is selected.
Undercarriage
attachment
controlAfter a single touch,
the lever can be used
to precisely operate
the selected undercar-
riage attachment. After
operating the under-
carriage attachments,
a single touch reverts
the lever into standard
boom operation.
Travel controlA rock button is installed on
the right hand lever, it controls
the travel operation into for-
ward, neutral and rear.
Clamshell controlAnti-clock wise clamshell
rotation.
11
PW220-7HYDRAULIC WHEELED EXCAVATOR
PRODUCTIVITY FEATURES
Improved fuel consumption
With its newly developed Komatsu ECOT3 engine, the
PW220-7 signifi cantly reduces hourly fuel consumption
through highly effi cient techniques for matching the
engine and hydraulic unit. The Komatsu SAA6D107E-1
engine meets EPA Tier III, and EU Stage IIIA emissions
regulations and reduces NOx emissions.
PowerMax function
PowerMax can be selected by depressing a joystick
button for an instant burst of power to help break
through tough digging situations. The PowerMax func-
tion is available in the P and E working mode.
Bucket digging force*: 17.950 kg
Arm crowd force*: 14.800 kg
* Measured with PowerMax function, 1.800 mm arm and ISO rating
Safe and precise lifting
PW220-7’s stability is one of the best in its class. The
machine is equipped with boom safety valves and
overload caution as standard. This combined with
the control of HydrauMind and the power of the lifting
mode, gives incredible safe and precise lifting perform-
ance.
Example: The over-front lifting capacity (reach 6,0 m
over front, height 1,5 m) is 9,1 tonnes (outriggers front +
rear, mono boom with 2,4 m arm and bucket).
Superb visibility
Excellent all-round visibility is provided
by large panoramic windows. Front
visibility is further improved by the use
of the Komatsu patented wiper system.
When not in use the wiper parks on the
cab frame itself with no contact with
the front window. As well as giving
excellent visibility, this systems avoids
the need to disconnect the wiper
before lifting the front window. The
standard new plexiglas roof with sun
visor gives the operator a better view
of overhead obstacles and machine
operations. It also allows more natural
light to illuminate the cab’s interior.
12
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
REVOLUTIONARY MACHINE MANAGEMENT
KOMTRAX™
server
Caution and periodic maintenanceAnnual working hour record
Check service meter
Working record (fuel level, hours etc.)
Check machine location Customer
The Komatsu Tracking System, KOMTRAX™, provides a revolutionary new way to monitor your equipment,
anytime, anywhere. It lets you pin-point the precise location of your machines and obtain real-time machine data.
Using GPS location and communication satellite technology, it’s designed to be future proof and will meet your
demands today and tomorrow.
Komtrax will help you to answer the three most important questions you have about your machine:
• Is the machine making money
• Is the machine safe
• Is the machine in good health
For more details, please ask your distributor for a copy of the Komtrax brochure.
There are certain countries where KOMTRAX™ is not yet available, please contact your distributor when you want to activate the system.
Komtrax will not operate if the satellite signal is blocked or obscured.
13
PW220-7HYDRAULIC WHEELED EXCAVATOR
Designed and built for strength
Using the latest computer aided design techniques and exhaustive testing, the boom and arm desings have been
optimised for strength and durability.
The highly automated manufacturing process uses the very latest equipment and quality control techniques. Criti-
cal welding is carried out by robots to ensure an extremely high quality and consistent product.
Precision engineered pin and bush system. The key work equipment joints use a chrome plated pin and bronze
bushing system to provide minimal play and extended durability.
Easy access to the engine oil
fi lter and fuel drain valve
The engine oil fi lter and fuel drain
valve are mounted remotely to im-
prove accessibility.
Easy maintenance
Komatsu designed the PW220-7 to have easy service access. By doing this, routine maintenance and servicing
are less likely to be skipped. This can mean a reduction in costly downtime later on. Here are some of the many
service features found on the PW220-7:
Water separator
This is standard equipment which
removes any water that has become
mixed with the fuel, preventing fuel
system damage.
Side-by-side cooling
The oil cooler and radiator are in-
stalled side by side. As a result, it is
very easy to clean the radiator, etc.
In addition, the operator can remove
and install the aftercooler, radiator
and oil cooler in a short time.
MAINTENANCE FEATURES
14
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
SPECIFICATIONS
ENGINE
Model ...........................................................Komatsu SAA6D107E-1
Type............................... Common rail direct injection, water-cooled,
emissionised, turbocharged, after-cooled diesel
Rated capacity ..................................125 kW/168 HP (ISO 9249 Net)
at engine speed .............................................................. 2.000 rpm
No. of cylinders ................................................................................ 6
Bore × stroke............................................................... 107 × 124 mm
Displacement........................................................................... 6,69 ltr
Batteries ....................................................................2 × 12 V/120 Ah
Alternator.............................................................................24 V/60 A
Starter motor ...................................................................24 V/5,5 kW
Air fi lter type ....................... Double element type with monitor panel
dust indicator and auto dust evacuator
Cooling .........................................................Suction type cooling fan
Type..............HydrauMind. Closed-centre system with load sensing
and pressure compensation valves
Additional circuits.................... Depending on the specifi cation up to
2 additional proportional control
& 1 quick coupler circuits can be installed
Main pump ............................2 variable displacement piston pumps
supplying boom, arm, bucket, swing and travel circuits
Maximum pump fl ow................................................ 2 × 218,4 ltr/min
Relief valve settings
Implement ........................................................................... 380 bar
Travel .................................................................................. 380 bar
Swing .................................................................................. 355 bar
Pilot circuit ............................................................................ 37 bar
HYDRAULIC SYSTEM
ENVIRONMENT
Engine emissions ...........................Fully complies with EU Stage IIIA
and EPA Tier III exhaust emission regulations
Noise levels
LwA external ................................ 103 dB(A) (2000/14/EC Stage II)
LpA operator ear........................ 72 dB(A) (ISO 6369 dynamic test)
Type...............................................Axial piston motor driving through
planetary double reduction gearbox
Swing lock................................... Electrically actuated wet multi-disc
brake integrated into swing motor.
Swing speed.................................................................... 0 - 12,4 rpm
Swing torque ........................................................................68,2 kNm
SWING SYSTEM
TRANSMISSION
Type........................... Fully automatic power shift transmission with
permanent 4 wheel drive
Travel motors ..............One variable displacement axial piston motor
Maximum pressure..................................................................380 bar
Travel modes...........................................Automatic + 3 travel modes
Max. travel speeds
Hi / Lo / Creep .................................................35,0 / 9,5 / 1,5 km/h
A max. speed restriction of 20 km/h is available as an option.
Maximum drawbar pull........................................................ 12.600 kg
Front axle load.................................................. Lower than 12.000 kg
Rear axle load................................................... Lower than 12.000 kg
Axle oscillation ..................................... 11° Lockable in any position
from the operator cab.
COOLANT AND LUBRICANT CAPACITY (REFILLING)
Fuel tank.................................................................................... 370 ltr
Radiator.................................................................................... 17,6 ltr
Engine oil .................................................................................. 25,4 ltr
Swing drive................................................................................. 6,6 ltr
Hydraulic tank ........................................................................... 166 ltr
Transmission .............................................................................. 2,9 ltr
Front differential ....................................................................... 13,5 ltr
Rear differential ........................................................................... 14 ltr
Front axle hub .......................................................................... 2,85 ltr
Rear axle hub ............................................................................. 2,0 ltr
Swing pinion grease bath amount............................................... 33 ltr
Type.................. Dual circuit hydraulic braking system supplied from
a separate gear pump.
Service brakes....... Pedal actuated wet multi-disc brakes integrated
into the axle hubs.
Parking brake .................Electrically actuated wet multi-disc “spring
actuation hydraulic release” brake integrated
into the transmission.
BRAKE SYSTEM
Steering control ..........................................Hydraulic steering system
supplied from a separate gear pump and
controlled through LS orbitrol & priority valves.
Minimum turning radius..............7.050 mm (to center of outer wheel)
STEERING SYSTEM
15
PW220-7HYDRAULIC WHEELED EXCAVATOR
OPERATING WEIGHT (APPR.)
Operating weight, including specifi ed work equipment, 2.400 mm arm, operator, lubricant, coolant, full fuel tank and the standard equipment.
Weights are without bucket.
UNDERCARRIAGE ATTACHMENT TYPE MONO BOOM TWO-PIECE BOOM
Undercarriage type Standard counterweight HD counterweight Standard counterweight HD counterweight
Without stabilizer 19.490 kg 20.240 kg 20.150 kg 20.910 kg
Rear blade 20.400 kg 21.150 kg 21.060 kg 21.820 kg
Rear outrigger 21.480 kg 21.320 kg 22.140 kg 22.900 kg
2 outriggers + blade 22.390 kg 22.230 kg 23.050 kg 23.810 kg
4 outriggers 22.560 kg 22.400 kg 23.220 kg 23.980 kg
Please consult with your distributor for the correct selection of buckets and attachments
to suit the application. The recommendations are given as a guide only, based on typical
operating conditions.
� Material weight up to 1,8 t/m³
� Material weight up to 1,5 t/m³
� Material weight up to 1,2 t/m³
– Not usable
Specifi cations and equipment may vary according to regional availability.
BUCKET OPTIONS & DIGGING FORCES
BUCKET AND ARM COMBINATIONS ARM LENGTH
Bucket Standard counterweight HD counterweight
Width Capacity (SAE) Weight 1,8 m 2,4 m 2,9 m 3,5 m 1,8 m 2,4 m 2,9 m 3,5 m
600 mm 0,48 m³ 480 kg � � � � � � � �700 mm 0,55 m³ 530 kg � � � � � � � �800 mm 0,63 m³ 580 kg � � � � � � � �900 mm 0,71 m³ 610 kg � � � � � � � �
1.000 mm 0,78 m³ 650 kg � � � � � � � �1.100 mm 0,86 m³ 700 kg � � � � � � � �1.200 mm 0,96 m³ 760 kg � � � � � � � �1.300 mm 1,03 m³ 810 kg � � � � � � � �1.400 mm 1,11 m³ 870 kg � � � � � � � �1.500 mm 1,19 m³ 930 kg � � � – � � � �1.600 mm 1,49 m³ 1.100 kg � – – – � � � –
1.700 mm 1,58 m³ 1.150 kg � – – – � � – –
1.800 mm 1,68 m³ 1.200 kg – – – – � – – –
BUCKET AND ARM FORCE
Arm length 1.800 mm 2.400 mm 2.900 mm 3.500 mm
Bucket digging force 16.620 kg* 16.620 kg* 14.170 kg 14.170 kg
Bucket digging force at PowerMax 17.950 kg* 17.950 kg* 15.190 kg 15.190 kg
Arm crowd force 13.800 kg 12.200 kg 10.300 kg 8.500 kg
Arm crowd force at PowerMax 14.800 kg 13.000 kg 11.000 kg 9.100 kg
* With optional large bucket cylinder
16
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
DIMENSIONS
220
220
MONO BOOM
TWO-PIECE BOOM
C
A
B
D
Driving position Transport position
Arm length A B C D
1.800 mm 9.479 mm 3.920 mm 9.688 mm 3.272 mm
2.400 mm 9.435 mm 3.909 mm 9.659 mm 3.200 mm
2.900 mm 9.427 mm 3.926 mm 9.592 mm 3.019 mm
3.500 mm 9.467 mm 3.999 mm 9.645 mm 3.573 mm
C
A
B
D
Driving position Transport position
Arm length A B C D
1.800 mm 7.070 mm 3.995 mm 9.466 mm 3.054 mm
2.400 mm 7.078 mm 3.995 mm 9.370 mm 3.198 mm
2.900 mm 7.000 mm 4.011 mm 9.289 mm 3.100 mm
3.500 mm 7.218 mm 4.519 mm 9.225 mm 3.716 mm
220 220
220220
220
17
PW220-7HYDRAULIC WHEELED EXCAVATOR
DIMENSIONS & UNDERCARRIAGE
2.700
2.750
3.859
4.555
2.35
6
1.34
1
4.365
1.075
4.925
1.300 1.450
3.945
4.965 4.925
345
2.124
2.750
661345
3.24
8
2.516
5.115
2.65
5
1.450 1.060
480
1.100
Machine is raised by 76 mm when operating outriggers
2.750
18
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
WORKING RANGE
MONO BOOM
ARM LENGTH 1.800 mm 2.400 mm 2.900 mm 3.500 mm
A Max. digging height 9.467 mm 9.883 mm 10.003 mm 10.438 mm
B Max. dumping height 6.704 mm 7.057 mm 7.229 mm 7.612 mm
C Max. digging depth 4.791 mm 5.402 mm 5.917 mm 6.500 mm
D Max. vertical wall digging depth 4.141 mm 4.745 mm 5.227 mm 5.809 mm
E Max. digging depth of cut for 2,44 m level 4.575 mm 5.225 mm 5.763 mm 6.366 mm
F Max. digging reach 9.061 mm 9.651 mm 10.060 mm 10.642 mm
G Max. digging reach at ground level 8.867 mm 9.438 mm 9.875 mm 10.478 mm
H Min. swing radius 3.906 mm 3.201 mm 3.143 mm 3.148 mm
19
PW220-7HYDRAULIC WHEELED EXCAVATOR
TWO-PIECE BOOM
11
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
-6
-711 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3
ARM LENGTH 1.800 mm 2.400 mm 2.900 mm 3.500 mm
A Max. digging height 9.532 mm 9.842 mm 10.168 mm 10.434 mm
B Max. dumping height 6.670 mm 6.982 mm 7.298 mm 7.574 mm
C Max. digging depth 5.186 mm 5.785 mm 6.285 mm 6.860 mm
D Max. vertical wall digging depth 4.104 mm 4.666 mm 5.208 mm 5.768 mm
E Max. digging depth of cut for 2,44 m level 5.119 mm 5.713 mm 6.226 mm 6.793 mm
F Max. digging reach 8.818 mm 9.348 mm 9.822 mm 10.338 mm
G Max. digging reach at ground level 8.599 mm 9.144 mm 9.634 mm 10.156 mm
H Min. swing radius 2.594 mm 3.121 mm 2.745 mm 2.866 mm
20
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
LIFTING CAPACITY
MONO BOOM
* Load is limited by hydraulic capacity rather than tipping.Ratings are based on SAE Standard No. J1097.Rated loads do not exceed 87% of hydrau-lic lift capacity or 75% of tipping load.
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights
– Reach from swing centre
– Bucket hook height
– Lifting capacities, including bucket
(760 kg), bucket linkage (130 kg) and
bucket cylinder (182 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
Rear blade
Without stabilizer
C
HD counterweight
A
B
9,0 m 7,5 m 6,0 m 4,5 m
Arm length
3,0 m 1,5 m
1.80
0 m
m
7,5 m kg *4.800 4.3006,0 m kg 4.150 2.900 5.200 3.7004,5 m kg 3.350 2.300 3.350 2.300 5.050 3.550 8.200 5.700 *16.9003,0 m kg 3.000 2.050 3.300 2.250 4.800 3.350 7.550 5.1001,5 m kg 2.900 1.950 3.200 2.200 4.500 3.050 7.000 4.6500,0 m kg 3.000 2.000 3.150 2.100 4.300 2.850 6.800 4.450
- 1,5 m kg 3.350 2.250 4.300 2.850 6.850 4.500 *9.300- 3,0 m kg *4.050 2.850 4.500 3.050 *6.300 4.650
2.40
0 m
m
7,5 m kg *4.250 3.500 *5.050 3.7506,0 m kg 3.600 2.500 5.300 3.8004,5 m kg 3.000 2.050 3.450 2.400 5.150 3.650 8.450 5.9003,0 m kg 2.700 1.800 3.350 2.300 4.900 3.400 7.700 5.2501,5 m kg 2.600 1.750 3.250 2.200 4.650 3.150 7.200 4.8000,0 m kg 2.650 1.750 3.150 2.100 4.350 2.900 6.900 4.550
- 1,5 m kg 2.950 1.950 3.100 2.100 4.250 2.800 6.850 4.500 *9.750 8.550- 3,0 m kg 3.550 2.400 4.400 2.950 6.950 4.600 *9.100 8.800
2.90
0 m
m
7,5 m kg *2.650 *2.650 *4.450 3.8506,0 m kg *2.550 2.200 3.550 2.450 *5.300 3.8504,5 m kg *2.550 1.800 3.500 2.450 5.200 3.7003,0 m kg 2.450 1.600 3.350 2.300 4.950 3.450 8.000 5.500 16.400 10.3001,5 m kg 2.350 1.550 3.250 2.200 4.650 3.200 7.350 4.9000,0 m kg 2.400 1.550 3.100 2.100 4.400 2.950 6.950 4.550 *5.950 *5.950
- 1,5 m kg 2.600 1.700 3.050 2.000 4.200 2.750 6.800 4.450 *9.200 8.450- 3,0 m kg 3.050 2.050 3.100 2.050 4.250 2.800 6.850 4.450 *11.250 8.650
3.50
0 m
m
7,5 m kg *2.650 2.450 *2.700 2.5006,0 m kg *2.550 1.900 3.600 2.5504,5 m kg 2.400 1.600 2.450 1.600 3.550 2.450 5.300 3.8003,0 m kg 2.150 1.400 2.400 1.550 3.400 2.350 5.000 3.500 8.200 5.6501,5 m kg 2.100 1.350 2.300 1.500 3.250 2.200 4.700 3.200 7.500 5.0500,0 m kg 2.100 1.350 2.250 1.450 3.100 2.050 4.450 2.950 7.000 4.600 *6.500 *6.500
- 1,5 m kg 2.250 1.450 3.000 1.950 4.150 2.750 6.750 4.400 *8.750 8.300 *5.200 *5.200- 3,0 m kg 2.650 1.700 3.000 1.950 4.150 2.700 6.700 4.350 *12.350 8.400 *8.200 *8.200
1.80
0 m
m
7,5 m kg *4.800 *4.8006,0 m kg *4.450 3.350 *7.700 4.2004,5 m kg *4.400 2.700 *4.450 2.700 *8.550 4.050 *11.050 6.550 *16.900 12.6503,0 m kg *4.650 2.400 5.650 2.650 8.300 3.850 *12.400 5.9001,5 m kg 5.000 2.300 5.550 2.550 8.000 3.550 *12.550 5.4000,0 m kg 5.150 2.350 5.450 2.500 7.700 3.350 *11.350 5.250
- 1,5 m kg *5.500 2.500 7.700 3.350 *10.050 5.250 *8.000 *8.000- 3,0 m kg *4.050 3.350 *4.600 3.550 *6.300 5.450
2.40
0 m
m
7,5 m kg *4.250 4.050 *5.050 4.3506,0 m kg *4.000 2.950 *6.800 4.4004,5 m kg *4.050 2.450 5.900 2.850 *8.200 4.250 *9.950 6.8003,0 m kg *4.200 2.200 5.800 2.750 8.550 4.000 *11.950 6.2001,5 m kg 4.600 2.150 5.650 2.650 8.250 3.800 *12.850 5.7500,0 m kg 4.700 2.200 5.550 2.600 7.950 3.550 *12.300 5.500
- 1,5 m kg 5.200 2.400 5.550 2.550 7.850 3.450 *10.600 5.450 *9.750 *9.750- 3,0 m kg *4.450 2.900 *6.000 3.600 *8.000 5.550 *9.350 *9.350
2.90
0 m
m
7,5 m kg *2.650 *2.650 *4.450 4.4006,0 m kg *2.550 2.550 *3.850 2.850 *5.300 4.4004,5 m kg *2.550 2.100 *5.300 2.800 *6.600 4.2503,0 m kg *2.650 1.900 5.700 2.700 *8.450 3.950 *11.300 6.300 *18.150 12.0501,5 m kg *2.900 1.800 5.550 2.550 8.150 3.700 *12.500 5.7000,0 m kg *3.300 1.850 5.450 2.450 7.850 3.450 *12.400 5.350 *5.950 *5.950
- 1,5 m kg *4.000 2.000 5.350 2.400 7.600 3.250 *11.150 5.200 *9.200 *9.200- 3,0 m kg *4350 2.400 *4.400 2.400 *6.600 3.300 *8.850 5.250 *11.250 10.300
3.50
0 m
m
7,5 m kg *2.650 *2.650 *2.700 *2.7006,0 m kg *2.550 2.200 *4.150 2.9004,5 m kg *2.550 1.850 *2.850 1.900 *4.950 2.850 *5.400 4.3003,0 m kg *2.650 1.700 *3.950 1.850 5.750 2.700 *7.750 4.050 *10.450 6.5001,5 m kg *2.900 1.600 4.050 1.800 5.550 2.550 8.200 3.750 *12.100 5.8500,0 m kg *3.250 1.600 3.950 1.750 5.400 2.400 7.900 3.500 *12.550 5.400 *6.500 *6.500
- 1,5 m kg *3.900 1.750 5.300 2.350 7.600 3.250 *11.700 5.150 *8.750 *8.750 *5.200 *5.200- 3,0 m kg *4.300 2.050 *5.250 2.300 *7.200 3.200 *9.850 5.150 *12.350 10.100 *8.200 *8.200
21
PW220-7HYDRAULIC WHEELED EXCAVATOR
Rear outrigger
Outrigger + blade
Outrigger front + rear
A
B
9,0 m 7,5 m 6,0 m 4,5 m
Arm length
3,0 m 1,5 m
1.80
0 m
m7,5 m kg *4.800 *4.8006,0 m kg *4.450 3.750 *7.700 4.7004,5 m kg *4.400 3.050 *4.450 3.050 *8.550 4.600 *11.050 7.350 *16.900 14.6003,0 m kg *4.650 2.700 6.300 3.000 *9.050 4.350 *12.400 6.7001,5 m kg *5.100 2.600 6.150 2.900 9.000 4.050 *12.550 6.2000,0 m kg 5.750 2.700 6.100 2.850 *8.500 3.850 *11.350 6.000
- 1,5 m kg *5.250 3.000 *7.150 3.850 *9.300 6.050 *9.300 *9.300- 3,0 m kg *4.050 3.800 *4.600 4.050 *6.300 6.200
2.40
0 m
m
7,5 m kg *4.250 *4.250 *5.050 4.8006,0 m kg *4.000 3.250 *6.800 4.8504,5 m kg *4.050 2.700 *6.300 3.150 *8.100 4.700 *9.950 7.5503,0 m kg *4.200 2.450 6.350 3.050 *8.800 4.450 *11.800 6.8501,5 m kg *4.600 2.350 6.200 2.900 9.150 4.150 *12.700 6.4000,0 m kg 5.150 2.400 6.100 2.850 8.800 2.900 *12.100 6.100
- 1,5 m kg *5.150 2.650 *5.700 2.800 *7.800 3.800 *10.450 6.050 *9.750 *9.750- 3,0 m kg *4.350 3.200 *5.900 3.950 *7.800 6.150 *9.100 *9.100
2.90
0 m
m
7,5 m kg *2.650 *2.650 *4.450 *4.4506,0 m kg *2.550 *2.550 *3.850 3.200 *5.300 4.9004,5 m kg *2.550 2.400 *5.300 3.150 *6.600 4.7503,0 m kg *2.650 2.200 6.350 3.050 *8.450 4.500 *11.300 7.150 *18.150 13.9501,5 m kg *2.900 2.100 6.200 2.900 9.000 4.200 *12.500 6.5000,0 m kg *3.300 2.150 6.050 2.800 8.850 3.950 *12.400 6.150 *5.950 *5.950
- 1,5 m kg *4.000 2.350 6.000 2.750 8.150 3.750 *11.150 6.000 *9.200 *9.200- 3,0 m kg *4.350 2.750 *4.400 2.800 *6.600 3.800 *8.850 6.050 *11.250 *11.250
3.50
0 m
m
7,5 m kg *2.650 *2.650 *2.700 *2.7006,0 m kg *2.550 2.500 *4.150 3.3004,5 m kg *2.550 2.150 *2.850 2.200 *4.950 3.200 *5.400 4.8003,0 m kg *2.650 1.950 *3.950 2.150 *6.200 3.050 *7.750 4.550 *10.450 7.3001,5 m kg *2.900 1.850 4.500 2.100 6.200 2.900 *8.750 4.250 *12.100 6.6500,0 m kg *3.250 1.900 4.450 2.000 6.050 2.800 8.900 3.950 *12.550 6.150 *6.500 *6.500
- 1,5 m kg *3.900 2.050 5.950 2.700 *8.450 3.700 *11.700 5.950 *8.750 *8.750 *5.200 *5.200- 3,0 m kg *4.300 2.350 *5.250 2.650 *7.200 3.700 *9.850 5.950 *12.350 11.900 *8.200 *8.200
1.80
0 m
m
7,5 m kg *4.850 *4.8506,0 m kg *4.500 *4.500 *7.850 5.9504,5 m kg *4.500 3.900 *4.500 3.900 8.600 5.800 *11.200 9.400 *17.1503,0 m kg *4.700 3.500 5.700 3.850 8.350 5.550 *12.600 8.7001,5 m kg 5.050 3.400 5.600 3.750 8.000 5.250 *12.750 8.1500,0 m kg 5.250 3.500 5.550 3.700 7.750 5.050 *11.550 7.950
- 1,5 m kg *5.350 3.900 *7.250 5.000 *9.450 8.000 *9.500- 3,0 m kg *4.150 *4.150 *4.700 *4.700 *6.450 *6.450
2.40
0 m
m
7,5 m kg *4.350 *4.350 *5.100 *5.1006,0 m kg *4.100 *4.100 *6.900 6.0504,5 m kg *4.100 3.500 5.900 4.000 *8.250 5.900 *10.100 9.6503,0 m kg *4.300 3.150 5.750 3.900 8.450 5.650 *12.000 8.9001,5 m kg 4.600 3.050 5.650 3.750 8.150 5.350 *12.900 8.4000,0 m kg 4.700 3.150 5.550 3.700 7.800 5.100 *12.300 8.050
- 1,5 m kg 5.200 3.450 5.500 3.650 7.700 5.000 *10.600 8.000 *9.900- 3,0 m kg *4.450 4.150 *6.000 5.150 *7.950 *7.950 *9.300
2.90
0 m
m
7,5 m kg *2.700 *2.700 *4.500 *4.5006,0 m kg *2.600 *2.600 *3.900 *3.900 *5.400 *5.4004,5 m kg *2.600 *2.600 *5.400 4.050 *6.700 5.9503,0 m kg *2.700 *2.700 5.800 3.900 8.500 5.700 *11.450 9.150 *18.400 *18.4001,5 m kg *2.950 2.750 5.650 3.750 8.200 5.400 *12.700 8.5000,0 m kg *3.350 2.800 5.500 3.650 7.850 5.100 *12.600 8.100 *6.050 *6.050
- 1,5 m kg *4.050 3.050 5.450 3.600 7.650 4.950 *11.300 7.950 *9.300 *9.300- 3,0 m kg *4.450 3.600 *4.500 3.600 *6.700 5.000 *9.000 8.000 *11.450 *11.450
3.50
0 m
m
7,5 m kg *2.700 *2.700 *2.750 *2.7506,0 m kg *2.600 *2.600 *4.200 4.1504,5 m kg *2.600 *2.600 *2.900 2.850 *5.050 4.050 *5.500 *5.5003,0 m kg *2.700 2.550 *4.000 2.800 5.800 3.950 *7.900 5.750 *10.600 9.4001,5 m kg *2.950 2.500 4.150 2.750 5.650 3.750 8.250 5.450 *12.300 8.6500,0 m kg *3.300 2.500 4.050 2.650 5.500 3.600 7.950 5.150 *12.750 8.150 *6.600 *6.600
- 1,5 m kg *3.950 2.700 5.400 3.550 7.600 4.900 *11.900 7.900 *8.900 *8.900 *5.300 *5.300- 3,0 m kg *4.400 3.100 *5.350 3.500 *7.350 4.850 *10.000 7.900 *12.550 *12.550 *8.350 *8.350
1.80
0 m
m
7,5 m kg *4.850 *4.8506,0 m kg *4.500 *4.500 *7.850 7.1004,5 m kg *4.500 *4.500 *4.500 *4.500 *8.700 6.950 *11.200 *11.200 *17.150 *17.1503,0 m kg *4.700 4.250 6.350 4.650 *9.200 6.700 *12.600 10.7501,5 m kg *5.150 4.100 6.250 4.550 9.000 6.400 *12.750 10.1500,0 m kg 5.850 4.250 6.200 4.450 *8.650 6.150 *11.550 9.950
- 1,5 m kg *5.350 4.750 *7.250 6.150 *9.450 *9.450 *9.500 *9.500- 3,0 m kg *4.150 *4.150 *4.700 *4.700 *6.450 *6.450
2.40
0 m
m
7,5 m kg *4.350 *4.350 *5.100 *5.1006,0 m kg *4.100 *4.100 *6.900 *6.9004,5 m kg *4.100 *4.100 *6.350 4.800 *8.250 7.100 *10.100 *10.1003,0 m kg *4.300 3.850 6.400 4.700 *8.900 6.800 *12.000 10.9501,5 m kg *4.700 3.700 6.300 4.550 9.150 6.500 *12.900 10.4000,0 m kg 5.250 3.800 6.150 4.450 8.800 6.200 *12.300 10.050
- 1,5 m kg *5.250 4.200 *5.800 4.450 *7.900 6.100 *10.600 10.000 *9.900 *9.900- 3,0 m kg *4.450 *4.450 *6.000 *6.000 *7.950 *7.950 *9.300 *9.300
2.90
0 m
m
7,5 m kg *2.700 *2.700 *4.500 *4.5006,0 m kg *2.600 *2.600 *3.900 *3.900 *5.400 *5.4004,5 m kg *2.600 *2.600 *5.400 4.400 *6.700 6.6003,0 m kg *2.700 *2.700 5.950 4.300 *8.500 6.300 *11.300 10.400 *18.150 *18.1501,5 m kg *2.950 *2.950 5.800 4.150 8.500 6.000 *12.650 9.7000,0 m kg *3.350 3.100 5.650 4.050 8.150 5.700 *12.650 9.250 *6.050 *6.050
- 1,5 m kg *4.050 3.350 5.600 3.950 7.950 5.500 *11.500 9.100 *9.300 *9.300- 3,0 m kg *4.600 4.000 *4.650 4.000 *6.900 5.550 *9.300 9.150 *11.450 *11.450
3.50
0 m
m
7,5 m kg *2.700 *2.700 *2.750 *2.7506,0 m kg *2.600 *2.600 *4.200 *4.2004,5 m kg *2.600 *2.600 *2.900 *2.900 *5.050 4.900 *5.500 *5.5003,0 m kg *2.700 *2.700 *4.000 3.400 *6.300 4.750 *7.900 6.950 *10.600 *10.6001,5 m kg *2.950 2.950 4.600 3.350 6.300 4.550 *8.900 6.600 *12.300 10.7000,0 m kg *3.300 3.100 4.500 3.250 6.150 4.400 8.950 6.300 *12.750 10.150 *6.600 *6.600
- 1,5 m kg *3.950 3.300 6.050 4.300 *8.600 6.050 *11.900 9.900 *8.900 *8.900 *5.300 *5.300- 3,0 m kg *4.400 3.800 *5.350 6.400 *7.350 6.000 *10.000 9.850 *12.550 *12.550 *8.350 *8.350
22
PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R
LIFTING CAPACITY
TWO-PIECE BOOM
* Load is limited by hydraulic capacity rather than tipping.Ratings are based on SAE Standard No. J1097.Rated loads do not exceed 87% of hydrau-lic lift capacity or 75% of tipping load.
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights
– Reach from swing centre
– Bucket hook height
– Lifting capacities, including bucket
(550 kg), bucket linkage (122 kg) and
bucket cylinder (109 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
A
HD counterweight
A
B
9,0 m 7,5 m 6,0 m 4,5 m
Arm length
3,0 m 1,5 m
Without stabilizer
Rear blade
1.80
0 m
m
7,5 m kg *5050 4.900 *7000 6.2506,0 m kg *4550 3.200 5.250 3.700 *7100 6.3004,5 m kg 3.650 2.500 5.150 3.600 *8450 5.900 *12000 11.4503,0 m kg 3.200 2.150 3.350 2.250 4.900 3.400 7.600 5.1001,5 m kg 3.050 2.050 3.250 2.150 4.650 3.150 7.200 4.7500,0 m kg 3.150 2.100 3.150 2.100 4.400 2.950 6.900 4.500
- 1,5 m kg 3.550 2.350 4.400 2.900 6.900 4.450 *12050 8.500- 3,0 m kg 7.050 4.600
2.40
0 m
m
7,5 m kg *4400 3.9006,0 m kg 3.900 2.700 5.450 3.8504,5 m kg 3.200 2.200 3.500 2.400 5.300 3.750 *7500 6.1003,0 m kg 2.850 1.900 3.400 2.300 5.000 3.500 8.100 5.5001,5 m kg 2.750 1.800 3.300 2.200 4.750 3.200 7.400 4.9500,0 m kg 2.800 1.850 3.150 2.100 4.500 3.000 7.000 4.600
- 1,5 m kg 3.000 1.950 3.150 2.050 4.400 2.900 6.900 4.500 *9150 8.450- 3,0 m kg 3.850 2.550 4.450 2.950 6.950 4.550 14.550 8.700
2.90
0 m
m
7,5 m kg *2800 *2800 *4150 3.9006,0 m kg *2600 2.350 *3200 2.500 *5150 3.9504,5 m kg *2550 1.900 3.550 2.450 5.400 3.800 *6300 6.3003,0 m kg 2.550 1.700 3.450 2.350 5.100 3.550 8.300 5.700 *13450 10.9001,5 m kg 2.450 1.600 3.300 2.200 4.750 3.250 7.550 5.050 *6350 *63500,0 m kg 2.500 1.600 3.150 2.100 4.500 3.000 7.050 4.600 *6950 *6950
- 1,5 m kg 2.750 1.750 3.100 2.000 4.350 2.850 6.850 4.450 *10200 8.400- 3,0 m kg 3.250 2.150 4.350 2.850 6.850 4.450 14.350 8.550
3.50
0 m
m
7,5 m kg *2700 2.7006,0 m kg *2550 2.050 3.650 2.550 *4500 4.0504,5 m kg 2.550 1.700 3.600 2.500 *5100 3.9003,0 m kg 2.300 1.500 2.400 1.550 3.450 2.400 5.200 3.600 *7650 5.900 *10850 *108501,5 m kg 2.200 1.400 2.350 1.500 3.300 2.200 4.850 3.300 7.650 5.1500,0 m kg 2.200 1.400 2.250 1.450 3.150 2.050 4.500 3.000 7.150 4.700 *7600 *7600
- 1,5 m kg 2.400 1.500 3.000 1.950 4.300 2.850 6.850 4.400 *9700 8.300 *5400 *5400- 3,0 m kg 2.800 1.800 3.000 1.950 4.250 2.750 6.750 4.350 *13700 8.350
1.80
0 m
m
7,5 m kg *5050 *5050 *7000 *70006,0 m kg *4550 3.650 *6600 4.250 *7100 *71004,5 m kg *4450 2.900 *7050 4.150 *8450 6.750 *12000 *120003,0 m kg *4600 2.550 5.750 2.650 *7850 3.900 *10300 5.9501,5 m kg *5050 2.400 5.600 2.550 8.200 3.650 *12000 5.5500,0 m kg 5.550 2.450 5.550 2.500 7.950 3.450 *12350 5.300
- 1,5 m kg 6.250 2.800 7.950 3.450 *11700 5.250 *12050 10.200- 3,0 m kg *9850 5.400
2.40
0 m
m
7,5 m kg *4400 *44006,0 m kg *4100 3.150 *5850 4.4004,5 m kg *4050 2.550 *5550 2.800 *6450 4.250 *7500 6.9503,0 m kg *4200 2.250 5.800 2.700 *7350 4.000 *9550 6.3501,5 m kg *4550 2.150 5.650 2.600 *8300 3.750 *11450 5.7500,0 m kg 4.900 2.200 5.550 2.500 8.050 3.500 *12350 5.400
- 1,5 m kg 5.450 2.400 5.500 2.450 7.900 3.400 *12150 5.250 *10950 10.150- 3,0 m kg *6600 3.000 *7800 3.450 *10850 5.350 *15400 10.400
2.90
0 m
m
7,5 m kg *2800 *2800 *4150 *41506,0 m kg *2600 *2600 *3200 2.850 *5150 4.5004,5 m kg *2550 2.250 *4950 2.850 *5850 4.350 *6300 *63003,0 m kg *2650 2.000 5.850 2.750 *6850 4.050 *8700 6.550 *13450 12.7001,5 m kg *2900 1.900 5.700 2.600 *7900 3.750 *10850 5.850 *6350 *63500,0 m kg *3250 1.950 5.550 2.450 8.100 3.550 *12100 5.400 *6950 *6950
- 1,5 m kg *3950 2.100 5.450 2.400 7.850 3.350 *12250 5.250 *10200 10.050- 3,0 m kg *5250 2.550 7.900 3.400 *11400 5.250 *15250 10.250
3.50
0 m
m
7,5 m kg *2750 *27506,0 m kg *2550 2.350 *3950 2.950 *4500 *45004,5 m kg *2550 2.000 *4750 2.900 *5100 4.4503,0 m kg *2650 1.800 *3350 1.850 *5450 2.750 *6250 4.150 *7650 6.750 *10850 *108501,5 m kg *2850 1.700 *3950 1.800 5.700 2.600 *7400 3.800 *9900 5.9500,0 m kg *3200 1.700 *3650 1.750 5.550 2.450 8.100 3.550 *11650 5.500 *7600 *7600
- 1,5 m kg *3800 1.850 5.400 2.350 7.850 3.350 *12200 5.200 *9750 *9750 *5400 *5400- 3,0 m kg *4900 2.150 5.400 2.300 7.800 3.300 *11800 5.150 *13700 10.050
23
PW220-7HYDRAULIC WHEELED EXCAVATOR
A
B
9,0 m 7,5 m 6,0 m 4,5 m
Arm length
3,0 m 1,5 m
Rear outrigger
Outrigger + blade
Outrigger front + rear
1.80
0 m
m7,5 m kg *5.050 *5.050 *7.000 *7.0006,0 m kg *4.550 4.100 *6.600 4.750 *7.100 *7.1004,5 m kg *4.450 3.300 *7.050 4.650 *8.450 7.600 *12.000 *12.0003,0 m kg *4.600 2.900 *6.150 3.000 *7.850 4.400 *10.300 6.7501,5 m kg *5.050 2.750 6.300 2.900 *8.600 4.150 *12.000 6.3500,0 m kg *5.800 2.850 *6.000 2.850 *8.900 3.950 *12.350 6.100
- 1,5 m kg *6.950 3.200 *8.550 3.950 *11.700 6.050 *12.050 12.050- 3,0 m kg *9.850 6.250
2.40
0 m
m
7,5 m kg *4.400 *4.4006,0 m kg *4.100 3.550 *5.850 4.9004,5 m kg *4.050 2.900 *5.550 3.150 *6.450 4.800 *7.500 *7.5003,0 m kg *4.200 2.600 *6.250 3.050 *7.350 4.550 *9.550 7.2001,5 m kg *4.550 2.450 6.300 2.950 *8.300 4.250 *11.450 6.5500,0 m kg *5.200 2.500 6.200 2.850 *8.850 4.000 *12.350 6.200
- 1,5 m kg 6.100 2.800 6.150 2.800 *8.800 3.900 *12.150 6.050 *10.950 *10.950- 3,0 m kg *6.600 3.450 *7.800 3.950 *10.850 6.150 *15.400 12.250
2.90
0 m
m
7,5 m kg *2.800 *2.800 *4.150 *4.1506,0 m kg *2.600 *2.600 *3.200 *3.200 *5.150 5.0004,5 m kg *2.550 *2.550 *4.950 3.200 *5.850 4.850 *6.300 *6.3003,0 m kg *2.650 2.300 *5.900 3.100 *6.850 4.600 *8.700 7.400 *13.450 *13.4501,5 m kg *2.900 2.200 6.350 2.950 *7.900 4.300 *10.850 6.700 *6.350 *6.3500,0 m kg *3.250 2.250 6.200 2.800 *8.650 4.050 *12.100 6.250 *6.950 *6.950
- 1,5 m kg *3.950 2.450 6.100 2.750 *8.800 3.850 *12.250 6.050 *10.200 *10.200- 3,0 m kg *5.250 2.950 *8.250 3.900 *11.400 6.050 *15.250 12.100
3.50
0 m
m
7,5 m kg *2.750 *2.7506,0 m kg *2.550 *2.550 *3.950 3.350 *4.500 *4.5004,5 m kg *2.550 2.300 *4.750 3.250 *5.100 4.9503,0 m kg *2.650 2.050 *3.350 2.150 *5.450 3.150 *6.250 4.700 *7.650 7.600 *10.850 *10.8501,5 m kg *2.850 1.950 *3.950 2.100 *6.050 2.950 *7.400 4.350 *9.900 6.8000,0 m kg *3.200 2.000 *3.650 2.000 6.200 2.800 *8.300 4.050 *11.650 6.300 *7.600 *7.600
- 1,5 m kg *3.800 2.150 6.050 2.700 *8.750 3.850 *12.200 6.000 *9.750 *9.750 *5.400 *5.400- 3,0 m kg *4.900 2.500 6.050 2.700 *8.500 3.850 *11.800 5.950 *13.700 11.850
1.80
0 m
m
7,5 m kg *5.100 *5.100 *7.100 *7.1006,0 m kg *4.600 *4.600 *6.700 6.100 *7.250 *7.2504,5 m kg *4.500 4.250 *7.150 6.000 *8.600 *8.600 *12.150 *12.1503,0 m kg *4.700 3.800 *6.250 3.900 *8.000 5.700 *10.450 8.9001,5 m kg *5.100 3.650 6.200 3.800 *8.750 5.450 *12.200 8.4500,0 m kg *5.900 3.750 6.100 3.750 8.750 5.200 *12.550 8.200
- 1,5 m kg 6.900 4.200 *8.700 5.200 *11.900 8.150 *12.250 *12.250- 3,0 m kg *10.050 8.350
2.40
0 m
m
7,5 m kg *4.500 *4.5006,0 m kg *4.150 *4.150 *5.950 *5.9504,5 m kg *4.100 3.750 *5.600 4.100 *6.550 6.100 *7.600 *7.6003,0 m kg *4.250 3.400 6.350 4.000 *7.500 5.850 *9.750 9.4001,5 m kg *4.600 3.250 6.200 3.850 *8.400 5.550 *11.650 8.7000,0 m kg *5.250 3.350 6.100 3.750 8.850 5.300 *12.550 8.300
- 1,5 m kg 6.000 3.700 6.050 3.700 8.700 5.150 *12.350 8.150 *11.150 *11.150- 3,0 m kg *6.700 4.500 *7.950 5.250 *11.050 8.250 *15.650 *15.650
2.90
0 m
m
7,5 m kg *2.850 *2.850 *4.250 *4.2506,0 m kg *2.650 *2.650 *3.250 *3.250 *5.250 *5.2504,5 m kg *2.600 *2.600 *5.000 4.150 *5.950 *5.950 *6.400 *6.4003,0 m kg *2.700 *2.700 *6.000 4.000 *6.950 *5.900 *8.850 *8.850 *13.700 *13.7001,5 m kg *2.950 *2.950 6.250 3.850 *8.050 5.600 *11.000 8.850 *6.450 *6.4500,0 m kg *3.350 3.000 6.100 3.750 *8.800 5.300 *12.300 8.350 *7.050 *7.050
- 1,5 m kg *4.000 3.250 6.000 3.650 8.650 5.150 *12.450 8.150 *10.350 *10.350- 3,0 m kg *5.350 3.150 *8.400 5.150 *11.600 8.150 *15.450 *15.450
3.50
0 m
m
7,5 m kg *2.750 *2.7506,0 m kg *2.600 *2.600 *4.000 *4.000 *4.550 *4.5504,5 m kg *2.600 *2.600 *4.850 4.200 *5.200 *5.2003,0 m kg *2.700 *2.700 *3.400 2.850 *5.550 4.050 *6.350 6.000 *7.750 *7.750 *11.050 *11.0501,5 m kg *2.900 2.650 *4.000 2.800 *6.150 3.900 *7.500 5.650 *10.100 8.9500,0 m kg *3.250 2.650 *3.700 2.700 6.100 3.700 *8.450 5.350 *11.800 8.450 *7.700 *7.700
- 1,5 m kg *3.850 2.850 5.950 3.600 8.650 5.100 *12.450 8.100 *9.850 *9.850 *5.500 *5.500- 3,0 m kg *5.000 3.350 5.950 3.600 8.600 5.050 *12.000 8.050 *13.900 *13.800
1.80
0 m
m
7,5 m kg *5.100 *5.100 *7.100 *7.1006,0 m kg *4.600 *4.600 *6.700 *6.700 *7.250 *7.2504,5 m kg *4.500 *4.500 *7.150 7.150 *8.600 *8.600 *12.150 *12.1503,0 m kg *4.700 4.500 *6.250 4.700 *8.000 6.850 *10.450 *10.4501,5 m kg *5.100 4.350 6.350 4.600 *8.750 6.550 *12.200 10.4000,0 m kg *5.900 4.500 *6.100 4.500 9.000 6.350 *12.550 10.100
- 1,5 m kg *7.050 5.050 *8.700 6.300 *11.900 10.100 *12.250 *12.250- 3,0 m kg *10.050 *10.050
2.40
0 m
m
7,5 m kg *4.500 *4.5006,0 m kg *4.150 *4.150 *5.950 *5.9504,5 m kg *4.100 *4.100 *5.600 4.850 *6.550 *6.550 *7.600 *7.6003,0 m kg *4.250 4.050 *6.350 4.750 *7.500 6.950 *9.750 *9.7501,5 m kg *4.600 3.900 6.400 4.650 *8.400 6.650 *11.650 10.6500,0 m kg *5.250 4.000 6.250 4.500 *9.000 6.400 *12.550 10.250
- 1,5 m kg 6.150 4.450 6.250 4.500 8.950 6.300 *12.350 10.100 *11.150 *11.150- 3,0 m kg *6.700 5.450 *7.950 6.350 *11.000 10.200 *15.650 *15.650
2.90
0 m
m
7,5 m kg *2.850 *2.850 *4.250 *4.2506,0 m kg *2.650 *2.650 *3.250 *3.250 *5.250 *5.2504,5 m kg *2.600 *2.600 *5.000 4.500 *5.950 *5.950 *6.400 *6.4003,0 m kg *2.700 *2.700 *6.000 4.400 *6.950 6.500 *8.850 *8.850 *13.700 *13.7001,5 m kg *2.950 *2.950 5.900 4.250 *8.050 6.150 *11.000 10.000 *6.450 *6.4500,0 m kg *3.350 3.250 5.750 4.100 8.400 5.850 *12.300 9.450 *7.050 *7.050
- 1,5 m kg *4.000 3.550 5.700 4.000 8.200 5.700 *12.450 9.200 *10.350 *10.350- 3,0 m kg *5.350 4.250 8.250 5.700 *11.600 9.200 *15.450 *15.450
3.50
0 m
m
7,5 m kg *2.750 *2.7506,0 m kg *2.600 *2.600 *4.000 *4.000 *4.550 *4.5504,5 m kg *2.600 *2.600 *4.850 *4.850 *5.200 *5.2003,0 m kg *2.700 *2.700 *3.400 *3.400 *5.550 4.850 *6.350 *6.350 *7.750 *7.750 *11.050 *11.0501,5 m kg *2.900 *2.900 *4.000 3.350 *6.150 4.650 *7.500 6.750 *10.100 *10.1000,0 m kg *3.250 *3.250 *3.700 3.300 6.250 4.500 *8.450 6.450 *11.800 10.400 *7.700 *7.700
- 1,5 m kg *3.850 3.500 6.150 4.350 8.900 6.250 *12.450 10.050 *9.850 *9.850 *5.500 *5.500- 3,0 m kg *5.000 4.050 6.100 4.350 *8.650 6.150 *12.000 9.950 *13.900 *13.900
Materials and specifications are subject to change without notice.is a trademark of Komatsu Ltd. Japan.
Komatsu EuropeInternational NVMechelsesteenweg 586B-1800 VILVOORDE (BELGIUM)Tel. +32-2-255 24 11Fax +32-2-252 19 81www.komatsu.eu
VESS001900 10/2007
Printed in Europe – This specifi cation sheet may contain attachments and optional equipment that are not available in your area.Please consult your local Komatsu distributor for those items you may require. Materials and specifi cations are subject to change without notice.
PW220-7
Call the experts
• Komatsu SAA6D107E-1, 125 kW
turbocharged common rail direct
injection diesel engine, EU Stage IIIA
compliant
• Double element type air cleaner
with dust indicator and auto dust
evacuator
• Suction type cooling fan
• Automatic fuel line de-aeration
• Engine key stop
• Engine ignition can be password
secured on request
• Engine overheat prevention system
• Auto-deceleration function
• Automatic engine warm-up system
• Alternator 24 V/60 A
• Batteries 2 × 12 V/120 Ah
• Starter motor 24 V/5,5 kW
• Standard counterweight
• Electronic closed-centre load
sensing (E-CLSS) hydraulic system
(HydrauMind)
• Pump and engine mutual control
(PEMC) system
• Multi-function colour monitor with
equipment management monitoring
system (EMMS)
• 4-working mode selection system;
Power mode, economy mode, breaker
mode and lifting mode
• PowerMax function
• Adjustable PPC wrist control levers
with 3 button control and proportional
attachment control slider for arm,
boom, bucket and swing
• Additional hydraulic circuit (HCU-B)
• Fully automatic 3-speed transmission
driving through front and rear
planetary axles
• Orbitrol type hydraulic steering acting
on front wheels
• Oscilating front axle (11°) with
automatic and manual cylinder
locking
• Dual circuit hydraulic brakes with
outboard wet multi-disc service
brakes
• Spring actuated park brake
(hydraulic release) incorporated into
transmission
• SpaceCab™, highly pressurized and
tightly sealed viscous mounted cab
with tinted safety glass windows,
pull-up type front window with
locking device, heated rear window,
removable lower window, front
window wiper with intermittent
feature, sun blind roller, magazine
rack behind seat, 12 V power supply,
cigarette lighter, ashtray, fl oor mat,
machine cab handrails, suspension
seat with tiltable left hand console,
automatic weight adjustment,
adjustable arm rests and retractable
seat belt, hot and cool box
• KOMTRAX™ Komatsu Tracking
System
• Parts book and operator manual
• Lockable fuel cap and covers
• Fuel supply pump
• Overload warning device
• Boom safety valves
• Dozer blade cylinder guard
• Climate control/Air conditioning
• Centralised greasing system
• Radio cassette preparation
• Toolkit and spare parts for fi rst
service
• Single chassis tool box
• Standard colour scheme and decals
• 2,75 m wide undercarriage
• Mono boom
• Two-piece boom
• 1,8 m; 2,4 m; 2,9 m; 3,5 m arms
• Additional hydraulic circuit (HCU-C)
• Parallel blade (front and/or rear)
• 2 or 4 outriggers with cylinder
protection (front and/or rear)
• Large bore bucket cylinders
(1,8 m and 2,4 m arms only)
• Four sets of tyre and rim (twin tyre)
10.00-20 14 PR
• Four sets of tyre and rim (twin tyre)
11.00-20 16 PR
• Four sets of tyre and rim (single tyre)
18.00 R22
• Nokian twin tyres 10-20
• Nokian twin tyres 11-20
• Automatic greasing system
• Quick-coupler piping
• Komatsu quick couplers
• Komatsu buckets
• Transmission guard
• Clamshell grip bar
• Adjust cylinder safety valve
• Arm cylinder safety valve
• Heated air suspension seat
• Radio-cassette
• Lower wiper
• OPG Level II front guard (FOPS)
• OPG Level II top guard (FOPS)
• Additional RH boom lamp
• Beacon + rear facing cab lamp
• Additional large capacity cab roof
lights (2)
• Bio oil
• Rain visor (not for use with OPG)
• Additional chassis tool box
• Customized paint
• HD counterweight
HYDRAULIC WHEELED EXCAVATOR
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
top related