pw220-7 - komatsu latin america - komatsuklc.com1].pdf · with its newly developed komatsu ecot3...

PW220-7

HY

DR

AU

LIC WH

EELED EX

CAV

AT

OR

PW220

NET HORSEPOWER125 kW 168 HP @ 2.000 rpm

OPERATING WEIGHT19.490 - 23.980 kg

BUCKET CAPACITYmax. 1,68 m³

PW220-7

2

PW220-7 H Y D R A U L I C W H E E L E D E X C A V A T O R

WALK-AROUND

The PW220-7 is a rugged, productive, all-European machine. Designed and expressly built for European markets,

it delivers productivity, reliability and operator comforts in a robust, environmentally-friendly package. Komatsu’s

exclusive, on-board, HydrauMind system assists in all operations, providing enhanced machine performance

that’s always perfectly matched to the task.

Excellent reliability and durability

• Reliable major components designed

and built by Komatsu

• Exceptionally reliable electronic de-

vices

Advanced Attachment Control

The PW220-7 is equipped to handle a wide variety

of attachments. The advanced attachment control

system features:

• Operator selectable hydraulic fl ow control

• Adjustable presets for rapid attachment

changeover

• Attachment piping options for breaker, clamshell

or crusher

Undercarriage

• Designed for high ground clearance

• Virtually zero axle rocking with out-

board wet disc system

• Powerful drawbar pull

• Automatic 3-speed travel

• 35 km/h maximum travel speed

• Standard undercarriage width: 2,75 m

High productivity

• High lifting capacity and good stability

• High drawbar pull

• Large bore bucket cylinders can be installed to the

1,8 m and 2,4 m arms to greatly increase digging

forces and productivity in tough conditions.

Komatsu Tracking System

Track and monitor your machine anytime,

anywhere for total peace of mind.

3

PW220-7HYDRAULIC WHEELED EXCAVATOR

NET HORSEPOWER

125 kW 168 HP

OPERATING WEIGHT

19.490 - 23.980 kg

BUCKET CAPACITY

max. 1,68 m³

SpaceCab™

• Sealed and pressurised cab with standard climate control

• Low-noise design

• Low-vibration design with viscous cabin damper mounting

• Cab moved forward for better visibility

• Ergonomic control levers

• Seat specially designed for wheeled machines,

with exceptional extra comfort

In harmony with the environment

• The economy mode reduces fuel consumption

• Low operating noise

• Designed for easy end-of-life recycling

The Komatsu SAA6D107E-1 engine

meets EU Stage IIIA and EPA Tier III

emission regulations.

9

4


EMMS

EMMS (Equipment Management and Monitoring System)The EMMS is a highly sophisticated system, controlling and monitoring all the excavator func-

tions. The user interface is highly intuitive and provides the operator with easy access to a huge

range of functions and operating information.

Four working modes

The PW220-7 is equipped with three working modes: (P, E, B), plus a lifting mode (L). Each mode is designed to

match the engine speed, pump speed, and system pressure with the current operating requirement. This provides

the fl exibility to match equipment performance to the job at hand.

1 Working mode select

2 Creep speed

3 High/low speed select

4 Control lever lock

5 Menu select key

6 Service menu

7 Engine auto deceleration

8 Buzzer cancel

9 Brightness adjust

10 Suspension auto lock

11 Suspension lock

12 Accept key

13 Scroll down

14 Scroll up

15 Undo switch

16 Rear left outrigger/blade

17 Front left outrigger/blade

18 Front right outrigger

19 Rear right outrigger

On-screen symbols

Push-button control switches

17

16

18

19

6

2

4 3

15

14

13

12

5

7

8

10

11

1

3

5

4

9

14

2

7

6

8

12

11

13

10

1

1 Working mode

2 Service meter and clock

3 Engine water gauge

4 Engine water temperature warning

5 Hydraulic oil gauge

6 Hydraulic oil temperature warning

7 Fuel gauge

8 Fuel low level warming

9 Travel direction

10 Travel mode

11 Auto deceleration

12 Suspension lock

13 Swing lock

14 Swing position

5


Password screen

Power mode

For maximum power and

fast cycle times. Normally

used for heavy operations

such as hard digging and

loading. This mode allows

access to the ‘PowerMax’

function to temporarily

increase the digging force

by 7% for added power in

tough situations.

Economy mode

The environmentally-

friendly mode. For run-

ning more quietly during

operations at night and/or

in urban areas. Fuel

consumption and exhaust

emissions are reduced.

Breaker mode

Delivers optimal hydrau-

lic pressure, fl ow and

engine RPMs for powerful

breaker operations.

Lifting mode

Increases the lifting ca-

pacity 7% by raising the

hydraulic pressure. This

mode supports safe lifting

operations.

Working mode Application Advantage

P Power mode • Maximum production/power

• Fast cycle times

E Economy mode • Excellent fuel economy

B Breaker mode • Optimum engine RPMs and hydraulic fl ow

L Lifting mode • Hydraulic pressure has been increased by 7%

Hydraulic fl ow general adjustment

screen in B (breaker) mode

Fine tune hydraulic fl ow adjustment

screen in B (breaker) mode

Fine tune hydraulic fl ow adjustment

screen in P (power) or E (economy)

mode

Easy to see and easy to use

Superb recognition colour LCD screens for each mode. Letters and numbers are

combined with colour images for exceptionally clear and easy-to-read information.

The high-resolution screen is easy to read in bright sunlight and in all lighting condi-

tions.

Automatic three-speed travel

The travel speed is automatically shifted from high to low speed, according to the

ground conditions.

Fingertip hydraulic pump oil fl ow adjustment

From the LCD monitor, you can automatically select the optimal hydraulic pump oil

fl ow for breaking, crushing, and other operations in the B, P or E modes. Also, when

simultaneously operating with attachments and work equipment, the fl ow to the at-

tachment is reduced automatically, thus delivering a smooth movement of the work

equipment.

Password protection

Prevents unauthorised machine use or transport. The engine cannot be started with-

out your four-digit use or password.

For total security, the battery is connected directly to the starter motor. Both the

starter and the engine need the password.

The password can be activated and deactivated upon request.

High Low Auto Creep

Travel speed 35 km/h 9 km/h 0 - 35 km/h 1,5 km/h

6


WORKING ENVIRONMENT

Outer air fi lter

Easy removal/installation of the air conditioner fi lter ele-

ment, without tools facilitates easier cleaning.

Climate controlLarge sun roof with integrated

sun shade

12-Volt power supply and

(optional) radio cassette

Tiltable steering wheel with

several functions; wiper control,

indicator, horn, and head lights

PW220-7’s cab interior is spacious

and provides a comfortable working

environment…

Pressurised cab

The standard-equipped climate control, air fi lter

and a higher internal air pressure resist dust entry

into the cab.

Low-noise design

Noise levels are substantially reduced; engine

noise as well as swing and hydraulics operations

noise.

Cab damper mounting for low vibration

levels

PW220-7 uses a new and improved viscous

damping cab mount system that incorporates a

longer stroke plus an added spring. The new cab

damper mounting, combined with strengthened

left and right-side decks, aids the reduction of

vibrations to the operator’s seat.

Rubber

Spring

Silicone oil

Comfortable cab

The new PW220-7 inner cab volume is 14% great-

er than the Dash 6 models, offering an exception-

ally comfortable operating environment. The large

cab enables the seat, with headrest, to be reclined

to horizontal.

SpaceCab™

7


Joysticks with propor-

tional control button

for attachments

Defroster/demister

Hot and cool box

Seat sliding range:

340 mm

Multi-position controls

The multi-position, proportional pressure control

levers allow the operator to work in comfort whilst

maintaining precise control. A double-slide mech-

anism allows the seat and controllers to move

together, or independently, allowing the operator

to position the controllers for maximum productiv-

ity and comfort.

Safety features

Thermal guard

Large handrail for

safe access

Improved, wide visibility

The right side window pillar has been removed and the

rear pillar reshaped to provide greater visibility.

Blind spots have been decreased by 34%.

Pump/engine room partition

This prevents hydraulic oil from spraying onto the

engine to reduce the risk of fi re.

Thermal and fan guards

Are placed around high-temperature

parts of the engine.

Steps with non-skid surface and large handrail

Steps with non-slip surfacing ensure safer

maintenance.

Non-slip sheet

8


FLEXIBILITY

ARMS BOOMS

Mono boom

Two-piece boom

1.800 mm

5.700 mm

5.410 mm

2.400 mm

Outriggers

Independently controlled outriggers are optionally available on

both, the front and rear of the machine. The cylinder protections

are standard on the outriggers.

2.900 mm

Additional hydraulic circuits

A 2-way additional hydraulic circuit, electrically controlled from the

wrist control levers, is fi tted as standard.

3.500 mm

9


The PW220-7 can be specifi ed with an enormous range of work

equipment and undercarriage attachments to meet the needs of

almost any application.

Toolbox

Tough, secure toolbox, integrated in the mudguards. Optionally

fi tted on both sides of the undercarriage.

Dozer blade

A parallel blade is available with standard cylinders protector for

both the front and rear of the machine.

Dimensions: 2.750 mm × 520 mm

Attachments commonality & functionality

The stabilizer and dozer blade are interchangeable, and there-

fore can be attached on the front or rear of the chassis. The sta-

bilizer and dozer blade are controllable from the monitor panel.

The monitor panel has four buttons that allow individual attach-

ment operation as well as collective operation.

220

10


EASY OPERATION

As well as operating the standard work equipment movements, the RH wrist control lever is also used to oper-

ate the undercarriage. When used in conjunction with the selection switch on the control panel, full independent

control of outriggers and dozer blade is immediately available. This feature, together with the automatic axle lock,

enables the machine to be moved, stabilized and operated extremely quickly.

Breaker controlUsed for breaker operation when

B mode is selected.

Undercarriage

attachment

controlAfter a single touch,

the lever can be used

to precisely operate

the selected undercar-

riage attachment. After

operating the under-

carriage attachments,

a single touch reverts

the lever into standard

boom operation.

Travel controlA rock button is installed on

the right hand lever, it controls

the travel operation into for-

ward, neutral and rear.

Clamshell controlAnti-clock wise clamshell

rotation.

11


PRODUCTIVITY FEATURES

Improved fuel consumption

With its newly developed Komatsu ECOT3 engine, the

PW220-7 signifi cantly reduces hourly fuel consumption

through highly effi cient techniques for matching the

engine and hydraulic unit. The Komatsu SAA6D107E-1

engine meets EPA Tier III, and EU Stage IIIA emissions

regulations and reduces NOx emissions.

PowerMax function

PowerMax can be selected by depressing a joystick

button for an instant burst of power to help break

through tough digging situations. The PowerMax func-

tion is available in the P and E working mode.

Bucket digging force*: 17.950 kg

Arm crowd force*: 14.800 kg

* Measured with PowerMax function, 1.800 mm arm and ISO rating

Safe and precise lifting

PW220-7’s stability is one of the best in its class. The

machine is equipped with boom safety valves and

overload caution as standard. This combined with

the control of HydrauMind and the power of the lifting

mode, gives incredible safe and precise lifting perform-

ance.

Example: The over-front lifting capacity (reach 6,0 m

over front, height 1,5 m) is 9,1 tonnes (outriggers front +

rear, mono boom with 2,4 m arm and bucket).

Superb visibility

Excellent all-round visibility is provided

by large panoramic windows. Front

visibility is further improved by the use

of the Komatsu patented wiper system.

When not in use the wiper parks on the

cab frame itself with no contact with

the front window. As well as giving

excellent visibility, this systems avoids

the need to disconnect the wiper

before lifting the front window. The

standard new plexiglas roof with sun

visor gives the operator a better view

of overhead obstacles and machine

operations. It also allows more natural

light to illuminate the cab’s interior.

12


REVOLUTIONARY MACHINE MANAGEMENT

KOMTRAX™

server

Caution and periodic maintenanceAnnual working hour record

Check service meter

Working record (fuel level, hours etc.)

Check machine location Customer

The Komatsu Tracking System, KOMTRAX™, provides a revolutionary new way to monitor your equipment,

anytime, anywhere. It lets you pin-point the precise location of your machines and obtain real-time machine data.

Using GPS location and communication satellite technology, it’s designed to be future proof and will meet your

demands today and tomorrow.

Komtrax will help you to answer the three most important questions you have about your machine:

• Is the machine making money

• Is the machine safe

• Is the machine in good health

For more details, please ask your distributor for a copy of the Komtrax brochure.

There are certain countries where KOMTRAX™ is not yet available, please contact your distributor when you want to activate the system.

Komtrax will not operate if the satellite signal is blocked or obscured.

13


Designed and built for strength

Using the latest computer aided design techniques and exhaustive testing, the boom and arm desings have been

optimised for strength and durability.

The highly automated manufacturing process uses the very latest equipment and quality control techniques. Criti-

cal welding is carried out by robots to ensure an extremely high quality and consistent product.

Precision engineered pin and bush system. The key work equipment joints use a chrome plated pin and bronze

bushing system to provide minimal play and extended durability.

Easy access to the engine oil

fi lter and fuel drain valve

The engine oil fi lter and fuel drain

valve are mounted remotely to im-

prove accessibility.

Easy maintenance

Komatsu designed the PW220-7 to have easy service access. By doing this, routine maintenance and servicing

are less likely to be skipped. This can mean a reduction in costly downtime later on. Here are some of the many

service features found on the PW220-7:

Water separator

This is standard equipment which

removes any water that has become

mixed with the fuel, preventing fuel

system damage.

Side-by-side cooling

The oil cooler and radiator are in-

stalled side by side. As a result, it is

very easy to clean the radiator, etc.

In addition, the operator can remove

and install the aftercooler, radiator

and oil cooler in a short time.

MAINTENANCE FEATURES

14


SPECIFICATIONS

ENGINE

Model ...........................................................Komatsu SAA6D107E-1

Type............................... Common rail direct injection, water-cooled,

emissionised, turbocharged, after-cooled diesel

Rated capacity ..................................125 kW/168 HP (ISO 9249 Net)

at engine speed .............................................................. 2.000 rpm

No. of cylinders ................................................................................ 6

Bore × stroke............................................................... 107 × 124 mm

Displacement........................................................................... 6,69 ltr

Batteries ....................................................................2 × 12 V/120 Ah

Alternator.............................................................................24 V/60 A

Starter motor ...................................................................24 V/5,5 kW

Air fi lter type ....................... Double element type with monitor panel

dust indicator and auto dust evacuator

Cooling .........................................................Suction type cooling fan

Type..............HydrauMind. Closed-centre system with load sensing

and pressure compensation valves

Additional circuits.................... Depending on the specifi cation up to

2 additional proportional control

& 1 quick coupler circuits can be installed

Main pump ............................2 variable displacement piston pumps

supplying boom, arm, bucket, swing and travel circuits

Maximum pump fl ow................................................ 2 × 218,4 ltr/min

Relief valve settings

Implement ........................................................................... 380 bar

Travel .................................................................................. 380 bar

Swing .................................................................................. 355 bar

Pilot circuit ............................................................................ 37 bar

HYDRAULIC SYSTEM

ENVIRONMENT

Engine emissions ...........................Fully complies with EU Stage IIIA

and EPA Tier III exhaust emission regulations

Noise levels

LwA external ................................ 103 dB(A) (2000/14/EC Stage II)

LpA operator ear........................ 72 dB(A) (ISO 6369 dynamic test)

Type...............................................Axial piston motor driving through

planetary double reduction gearbox

Swing lock................................... Electrically actuated wet multi-disc

brake integrated into swing motor.

Swing speed.................................................................... 0 - 12,4 rpm

Swing torque ........................................................................68,2 kNm

SWING SYSTEM

TRANSMISSION

Type........................... Fully automatic power shift transmission with

permanent 4 wheel drive

Travel motors ..............One variable displacement axial piston motor

Maximum pressure..................................................................380 bar

Travel modes...........................................Automatic + 3 travel modes

Max. travel speeds

Hi / Lo / Creep .................................................35,0 / 9,5 / 1,5 km/h

A max. speed restriction of 20 km/h is available as an option.

Maximum drawbar pull........................................................ 12.600 kg

Front axle load.................................................. Lower than 12.000 kg

Rear axle load................................................... Lower than 12.000 kg

Axle oscillation ..................................... 11° Lockable in any position

from the operator cab.

COOLANT AND LUBRICANT CAPACITY (REFILLING)

Fuel tank.................................................................................... 370 ltr

Radiator.................................................................................... 17,6 ltr

Engine oil .................................................................................. 25,4 ltr

Swing drive................................................................................. 6,6 ltr

Hydraulic tank ........................................................................... 166 ltr

Transmission .............................................................................. 2,9 ltr

Front differential ....................................................................... 13,5 ltr

Rear differential ........................................................................... 14 ltr

Front axle hub .......................................................................... 2,85 ltr

Rear axle hub ............................................................................. 2,0 ltr

Swing pinion grease bath amount............................................... 33 ltr

Type.................. Dual circuit hydraulic braking system supplied from

a separate gear pump.

Service brakes....... Pedal actuated wet multi-disc brakes integrated

into the axle hubs.

Parking brake .................Electrically actuated wet multi-disc “spring

actuation hydraulic release” brake integrated

into the transmission.

BRAKE SYSTEM

Steering control ..........................................Hydraulic steering system

supplied from a separate gear pump and

controlled through LS orbitrol & priority valves.

Minimum turning radius..............7.050 mm (to center of outer wheel)

STEERING SYSTEM

15


OPERATING WEIGHT (APPR.)

Operating weight, including specifi ed work equipment, 2.400 mm arm, operator, lubricant, coolant, full fuel tank and the standard equipment.

Weights are without bucket.

UNDERCARRIAGE ATTACHMENT TYPE MONO BOOM TWO-PIECE BOOM

Undercarriage type Standard counterweight HD counterweight Standard counterweight HD counterweight

Without stabilizer 19.490 kg 20.240 kg 20.150 kg 20.910 kg

Rear blade 20.400 kg 21.150 kg 21.060 kg 21.820 kg

Rear outrigger 21.480 kg 21.320 kg 22.140 kg 22.900 kg

2 outriggers + blade 22.390 kg 22.230 kg 23.050 kg 23.810 kg

4 outriggers 22.560 kg 22.400 kg 23.220 kg 23.980 kg

Please consult with your distributor for the correct selection of buckets and attachments

to suit the application. The recommendations are given as a guide only, based on typical

operating conditions.

� Material weight up to 1,8 t/m³



– Not usable

Specifi cations and equipment may vary according to regional availability.

BUCKET OPTIONS & DIGGING FORCES

BUCKET AND ARM COMBINATIONS ARM LENGTH

Bucket Standard counterweight HD counterweight

Width Capacity (SAE) Weight 1,8 m 2,4 m 2,9 m 3,5 m 1,8 m 2,4 m 2,9 m 3,5 m

600 mm 0,48 m³ 480 kg � � � � � � � �700 mm 0,55 m³ 530 kg � � � � � � � �800 mm 0,63 m³ 580 kg � � � � � � � �900 mm 0,71 m³ 610 kg � � � � � � � �

1.000 mm 0,78 m³ 650 kg � � � � � � � �1.100 mm 0,86 m³ 700 kg � � � � � � � �1.200 mm 0,96 m³ 760 kg � � � � � � � �1.300 mm 1,03 m³ 810 kg � � � � � � � �1.400 mm 1,11 m³ 870 kg � � � � � � � �1.500 mm 1,19 m³ 930 kg � � � – � � � �1.600 mm 1,49 m³ 1.100 kg � – – – � � � –

1.700 mm 1,58 m³ 1.150 kg � – – – � � – –

1.800 mm 1,68 m³ 1.200 kg – – – – � – – –

BUCKET AND ARM FORCE

Arm length 1.800 mm 2.400 mm 2.900 mm 3.500 mm

Bucket digging force 16.620 kg* 16.620 kg* 14.170 kg 14.170 kg

Bucket digging force at PowerMax 17.950 kg* 17.950 kg* 15.190 kg 15.190 kg

Arm crowd force 13.800 kg 12.200 kg 10.300 kg 8.500 kg

Arm crowd force at PowerMax 14.800 kg 13.000 kg 11.000 kg 9.100 kg

* With optional large bucket cylinder

16


DIMENSIONS

220

220

MONO BOOM

TWO-PIECE BOOM

C

A

B

D

Driving position Transport position

Arm length A B C D

1.800 mm 9.479 mm 3.920 mm 9.688 mm 3.272 mm

2.400 mm 9.435 mm 3.909 mm 9.659 mm 3.200 mm

2.900 mm 9.427 mm 3.926 mm 9.592 mm 3.019 mm

3.500 mm 9.467 mm 3.999 mm 9.645 mm 3.573 mm

C

A

B

D

Driving position Transport position

Arm length A B C D

1.800 mm 7.070 mm 3.995 mm 9.466 mm 3.054 mm

2.400 mm 7.078 mm 3.995 mm 9.370 mm 3.198 mm

2.900 mm 7.000 mm 4.011 mm 9.289 mm 3.100 mm

3.500 mm 7.218 mm 4.519 mm 9.225 mm 3.716 mm

220 220

220220

220

17


DIMENSIONS & UNDERCARRIAGE

2.700

2.750

3.859

4.555

2.35

6

1.34

1

4.365

1.075

4.925

1.300 1.450

3.945

4.965 4.925

345

2.124

2.750

661345

3.24

8

2.516

5.115

2.65

5

1.450 1.060

480

1.100

Machine is raised by 76 mm when operating outriggers

2.750

18


WORKING RANGE

MONO BOOM

ARM LENGTH 1.800 mm 2.400 mm 2.900 mm 3.500 mm

A Max. digging height 9.467 mm 9.883 mm 10.003 mm 10.438 mm

B Max. dumping height 6.704 mm 7.057 mm 7.229 mm 7.612 mm

C Max. digging depth 4.791 mm 5.402 mm 5.917 mm 6.500 mm

D Max. vertical wall digging depth 4.141 mm 4.745 mm 5.227 mm 5.809 mm

E Max. digging depth of cut for 2,44 m level 4.575 mm 5.225 mm 5.763 mm 6.366 mm

F Max. digging reach 9.061 mm 9.651 mm 10.060 mm 10.642 mm

G Max. digging reach at ground level 8.867 mm 9.438 mm 9.875 mm 10.478 mm

H Min. swing radius 3.906 mm 3.201 mm 3.143 mm 3.148 mm

19


TWO-PIECE BOOM

11

10

9

8

7

6

5

4

3

2

1

0

-1

-2

-3

-4

-5

-6

-711 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3

ARM LENGTH 1.800 mm 2.400 mm 2.900 mm 3.500 mm

A Max. digging height 9.532 mm 9.842 mm 10.168 mm 10.434 mm

B Max. dumping height 6.670 mm 6.982 mm 7.298 mm 7.574 mm

C Max. digging depth 5.186 mm 5.785 mm 6.285 mm 6.860 mm

D Max. vertical wall digging depth 4.104 mm 4.666 mm 5.208 mm 5.768 mm

E Max. digging depth of cut for 2,44 m level 5.119 mm 5.713 mm 6.226 mm 6.793 mm

F Max. digging reach 8.818 mm 9.348 mm 9.822 mm 10.338 mm

G Max. digging reach at ground level 8.599 mm 9.144 mm 9.634 mm 10.156 mm

H Min. swing radius 2.594 mm 3.121 mm 2.745 mm 2.866 mm

20


LIFTING CAPACITY

MONO BOOM

* Load is limited by hydraulic capacity rather than tipping.Ratings are based on SAE Standard No. J1097.Rated loads do not exceed 87% of hydrau-lic lift capacity or 75% of tipping load.

A

B

C

When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights

– Reach from swing centre

– Bucket hook height

– Lifting capacities, including bucket

(760 kg), bucket linkage (130 kg) and

bucket cylinder (182 kg)

– Rating over front

– Rating over side

– Rating at maximum reach

Rear blade

Without stabilizer

C

HD counterweight

A

B

9,0 m 7,5 m 6,0 m 4,5 m

Arm length

3,0 m 1,5 m

1.80

0 m

m

7,5 m kg *4.800 4.3006,0 m kg 4.150 2.900 5.200 3.7004,5 m kg 3.350 2.300 3.350 2.300 5.050 3.550 8.200 5.700 *16.9003,0 m kg 3.000 2.050 3.300 2.250 4.800 3.350 7.550 5.1001,5 m kg 2.900 1.950 3.200 2.200 4.500 3.050 7.000 4.6500,0 m kg 3.000 2.000 3.150 2.100 4.300 2.850 6.800 4.450

- 1,5 m kg 3.350 2.250 4.300 2.850 6.850 4.500 *9.300- 3,0 m kg *4.050 2.850 4.500 3.050 *6.300 4.650

2.40

0 m

m

7,5 m kg *4.250 3.500 *5.050 3.7506,0 m kg 3.600 2.500 5.300 3.8004,5 m kg 3.000 2.050 3.450 2.400 5.150 3.650 8.450 5.9003,0 m kg 2.700 1.800 3.350 2.300 4.900 3.400 7.700 5.2501,5 m kg 2.600 1.750 3.250 2.200 4.650 3.150 7.200 4.8000,0 m kg 2.650 1.750 3.150 2.100 4.350 2.900 6.900 4.550

- 1,5 m kg 2.950 1.950 3.100 2.100 4.250 2.800 6.850 4.500 *9.750 8.550- 3,0 m kg 3.550 2.400 4.400 2.950 6.950 4.600 *9.100 8.800

2.90

0 m

m

7,5 m kg *2.650 *2.650 *4.450 3.8506,0 m kg *2.550 2.200 3.550 2.450 *5.300 3.8504,5 m kg *2.550 1.800 3.500 2.450 5.200 3.7003,0 m kg 2.450 1.600 3.350 2.300 4.950 3.450 8.000 5.500 16.400 10.3001,5 m kg 2.350 1.550 3.250 2.200 4.650 3.200 7.350 4.9000,0 m kg 2.400 1.550 3.100 2.100 4.400 2.950 6.950 4.550 *5.950 *5.950

- 1,5 m kg 2.600 1.700 3.050 2.000 4.200 2.750 6.800 4.450 *9.200 8.450- 3,0 m kg 3.050 2.050 3.100 2.050 4.250 2.800 6.850 4.450 *11.250 8.650

3.50

0 m

m

7,5 m kg *2.650 2.450 *2.700 2.5006,0 m kg *2.550 1.900 3.600 2.5504,5 m kg 2.400 1.600 2.450 1.600 3.550 2.450 5.300 3.8003,0 m kg 2.150 1.400 2.400 1.550 3.400 2.350 5.000 3.500 8.200 5.6501,5 m kg 2.100 1.350 2.300 1.500 3.250 2.200 4.700 3.200 7.500 5.0500,0 m kg 2.100 1.350 2.250 1.450 3.100 2.050 4.450 2.950 7.000 4.600 *6.500 *6.500

- 1,5 m kg 2.250 1.450 3.000 1.950 4.150 2.750 6.750 4.400 *8.750 8.300 *5.200 *5.200- 3,0 m kg 2.650 1.700 3.000 1.950 4.150 2.700 6.700 4.350 *12.350 8.400 *8.200 *8.200

1.80

0 m

m

7,5 m kg *4.800 *4.8006,0 m kg *4.450 3.350 *7.700 4.2004,5 m kg *4.400 2.700 *4.450 2.700 *8.550 4.050 *11.050 6.550 *16.900 12.6503,0 m kg *4.650 2.400 5.650 2.650 8.300 3.850 *12.400 5.9001,5 m kg 5.000 2.300 5.550 2.550 8.000 3.550 *12.550 5.4000,0 m kg 5.150 2.350 5.450 2.500 7.700 3.350 *11.350 5.250

- 1,5 m kg *5.500 2.500 7.700 3.350 *10.050 5.250 *8.000 *8.000- 3,0 m kg *4.050 3.350 *4.600 3.550 *6.300 5.450

2.40

0 m

m

7,5 m kg *4.250 4.050 *5.050 4.3506,0 m kg *4.000 2.950 *6.800 4.4004,5 m kg *4.050 2.450 5.900 2.850 *8.200 4.250 *9.950 6.8003,0 m kg *4.200 2.200 5.800 2.750 8.550 4.000 *11.950 6.2001,5 m kg 4.600 2.150 5.650 2.650 8.250 3.800 *12.850 5.7500,0 m kg 4.700 2.200 5.550 2.600 7.950 3.550 *12.300 5.500

- 1,5 m kg 5.200 2.400 5.550 2.550 7.850 3.450 *10.600 5.450 *9.750 *9.750- 3,0 m kg *4.450 2.900 *6.000 3.600 *8.000 5.550 *9.350 *9.350

2.90

0 m

m

7,5 m kg *2.650 *2.650 *4.450 4.4006,0 m kg *2.550 2.550 *3.850 2.850 *5.300 4.4004,5 m kg *2.550 2.100 *5.300 2.800 *6.600 4.2503,0 m kg *2.650 1.900 5.700 2.700 *8.450 3.950 *11.300 6.300 *18.150 12.0501,5 m kg *2.900 1.800 5.550 2.550 8.150 3.700 *12.500 5.7000,0 m kg *3.300 1.850 5.450 2.450 7.850 3.450 *12.400 5.350 *5.950 *5.950

- 1,5 m kg *4.000 2.000 5.350 2.400 7.600 3.250 *11.150 5.200 *9.200 *9.200- 3,0 m kg *4350 2.400 *4.400 2.400 *6.600 3.300 *8.850 5.250 *11.250 10.300

3.50

0 m

m

7,5 m kg *2.650 *2.650 *2.700 *2.7006,0 m kg *2.550 2.200 *4.150 2.9004,5 m kg *2.550 1.850 *2.850 1.900 *4.950 2.850 *5.400 4.3003,0 m kg *2.650 1.700 *3.950 1.850 5.750 2.700 *7.750 4.050 *10.450 6.5001,5 m kg *2.900 1.600 4.050 1.800 5.550 2.550 8.200 3.750 *12.100 5.8500,0 m kg *3.250 1.600 3.950 1.750 5.400 2.400 7.900 3.500 *12.550 5.400 *6.500 *6.500

- 1,5 m kg *3.900 1.750 5.300 2.350 7.600 3.250 *11.700 5.150 *8.750 *8.750 *5.200 *5.200- 3,0 m kg *4.300 2.050 *5.250 2.300 *7.200 3.200 *9.850 5.150 *12.350 10.100 *8.200 *8.200

21


Rear outrigger

Outrigger + blade

Outrigger front + rear

A

B

9,0 m 7,5 m 6,0 m 4,5 m

Arm length

3,0 m 1,5 m

1.80

0 m

m7,5 m kg *4.800 *4.8006,0 m kg *4.450 3.750 *7.700 4.7004,5 m kg *4.400 3.050 *4.450 3.050 *8.550 4.600 *11.050 7.350 *16.900 14.6003,0 m kg *4.650 2.700 6.300 3.000 *9.050 4.350 *12.400 6.7001,5 m kg *5.100 2.600 6.150 2.900 9.000 4.050 *12.550 6.2000,0 m kg 5.750 2.700 6.100 2.850 *8.500 3.850 *11.350 6.000

- 1,5 m kg *5.250 3.000 *7.150 3.850 *9.300 6.050 *9.300 *9.300- 3,0 m kg *4.050 3.800 *4.600 4.050 *6.300 6.200

2.40

0 m

m

7,5 m kg *4.250 *4.250 *5.050 4.8006,0 m kg *4.000 3.250 *6.800 4.8504,5 m kg *4.050 2.700 *6.300 3.150 *8.100 4.700 *9.950 7.5503,0 m kg *4.200 2.450 6.350 3.050 *8.800 4.450 *11.800 6.8501,5 m kg *4.600 2.350 6.200 2.900 9.150 4.150 *12.700 6.4000,0 m kg 5.150 2.400 6.100 2.850 8.800 2.900 *12.100 6.100

- 1,5 m kg *5.150 2.650 *5.700 2.800 *7.800 3.800 *10.450 6.050 *9.750 *9.750- 3,0 m kg *4.350 3.200 *5.900 3.950 *7.800 6.150 *9.100 *9.100

2.90

0 m

m

7,5 m kg *2.650 *2.650 *4.450 *4.4506,0 m kg *2.550 *2.550 *3.850 3.200 *5.300 4.9004,5 m kg *2.550 2.400 *5.300 3.150 *6.600 4.7503,0 m kg *2.650 2.200 6.350 3.050 *8.450 4.500 *11.300 7.150 *18.150 13.9501,5 m kg *2.900 2.100 6.200 2.900 9.000 4.200 *12.500 6.5000,0 m kg *3.300 2.150 6.050 2.800 8.850 3.950 *12.400 6.150 *5.950 *5.950

- 1,5 m kg *4.000 2.350 6.000 2.750 8.150 3.750 *11.150 6.000 *9.200 *9.200- 3,0 m kg *4.350 2.750 *4.400 2.800 *6.600 3.800 *8.850 6.050 *11.250 *11.250

3.50

0 m

m

7,5 m kg *2.650 *2.650 *2.700 *2.7006,0 m kg *2.550 2.500 *4.150 3.3004,5 m kg *2.550 2.150 *2.850 2.200 *4.950 3.200 *5.400 4.8003,0 m kg *2.650 1.950 *3.950 2.150 *6.200 3.050 *7.750 4.550 *10.450 7.3001,5 m kg *2.900 1.850 4.500 2.100 6.200 2.900 *8.750 4.250 *12.100 6.6500,0 m kg *3.250 1.900 4.450 2.000 6.050 2.800 8.900 3.950 *12.550 6.150 *6.500 *6.500

- 1,5 m kg *3.900 2.050 5.950 2.700 *8.450 3.700 *11.700 5.950 *8.750 *8.750 *5.200 *5.200- 3,0 m kg *4.300 2.350 *5.250 2.650 *7.200 3.700 *9.850 5.950 *12.350 11.900 *8.200 *8.200

1.80

0 m

m

7,5 m kg *4.850 *4.8506,0 m kg *4.500 *4.500 *7.850 5.9504,5 m kg *4.500 3.900 *4.500 3.900 8.600 5.800 *11.200 9.400 *17.1503,0 m kg *4.700 3.500 5.700 3.850 8.350 5.550 *12.600 8.7001,5 m kg 5.050 3.400 5.600 3.750 8.000 5.250 *12.750 8.1500,0 m kg 5.250 3.500 5.550 3.700 7.750 5.050 *11.550 7.950

- 1,5 m kg *5.350 3.900 *7.250 5.000 *9.450 8.000 *9.500- 3,0 m kg *4.150 *4.150 *4.700 *4.700 *6.450 *6.450

2.40

0 m

m

7,5 m kg *4.350 *4.350 *5.100 *5.1006,0 m kg *4.100 *4.100 *6.900 6.0504,5 m kg *4.100 3.500 5.900 4.000 *8.250 5.900 *10.100 9.6503,0 m kg *4.300 3.150 5.750 3.900 8.450 5.650 *12.000 8.9001,5 m kg 4.600 3.050 5.650 3.750 8.150 5.350 *12.900 8.4000,0 m kg 4.700 3.150 5.550 3.700 7.800 5.100 *12.300 8.050

- 1,5 m kg 5.200 3.450 5.500 3.650 7.700 5.000 *10.600 8.000 *9.900- 3,0 m kg *4.450 4.150 *6.000 5.150 *7.950 *7.950 *9.300

2.90

0 m

m

7,5 m kg *2.700 *2.700 *4.500 *4.5006,0 m kg *2.600 *2.600 *3.900 *3.900 *5.400 *5.4004,5 m kg *2.600 *2.600 *5.400 4.050 *6.700 5.9503,0 m kg *2.700 *2.700 5.800 3.900 8.500 5.700 *11.450 9.150 *18.400 *18.4001,5 m kg *2.950 2.750 5.650 3.750 8.200 5.400 *12.700 8.5000,0 m kg *3.350 2.800 5.500 3.650 7.850 5.100 *12.600 8.100 *6.050 *6.050

- 1,5 m kg *4.050 3.050 5.450 3.600 7.650 4.950 *11.300 7.950 *9.300 *9.300- 3,0 m kg *4.450 3.600 *4.500 3.600 *6.700 5.000 *9.000 8.000 *11.450 *11.450

3.50

0 m

m

7,5 m kg *2.700 *2.700 *2.750 *2.7506,0 m kg *2.600 *2.600 *4.200 4.1504,5 m kg *2.600 *2.600 *2.900 2.850 *5.050 4.050 *5.500 *5.5003,0 m kg *2.700 2.550 *4.000 2.800 5.800 3.950 *7.900 5.750 *10.600 9.4001,5 m kg *2.950 2.500 4.150 2.750 5.650 3.750 8.250 5.450 *12.300 8.6500,0 m kg *3.300 2.500 4.050 2.650 5.500 3.600 7.950 5.150 *12.750 8.150 *6.600 *6.600

- 1,5 m kg *3.950 2.700 5.400 3.550 7.600 4.900 *11.900 7.900 *8.900 *8.900 *5.300 *5.300- 3,0 m kg *4.400 3.100 *5.350 3.500 *7.350 4.850 *10.000 7.900 *12.550 *12.550 *8.350 *8.350

1.80

0 m

m

7,5 m kg *4.850 *4.8506,0 m kg *4.500 *4.500 *7.850 7.1004,5 m kg *4.500 *4.500 *4.500 *4.500 *8.700 6.950 *11.200 *11.200 *17.150 *17.1503,0 m kg *4.700 4.250 6.350 4.650 *9.200 6.700 *12.600 10.7501,5 m kg *5.150 4.100 6.250 4.550 9.000 6.400 *12.750 10.1500,0 m kg 5.850 4.250 6.200 4.450 *8.650 6.150 *11.550 9.950

- 1,5 m kg *5.350 4.750 *7.250 6.150 *9.450 *9.450 *9.500 *9.500- 3,0 m kg *4.150 *4.150 *4.700 *4.700 *6.450 *6.450

2.40

0 m

m

7,5 m kg *4.350 *4.350 *5.100 *5.1006,0 m kg *4.100 *4.100 *6.900 *6.9004,5 m kg *4.100 *4.100 *6.350 4.800 *8.250 7.100 *10.100 *10.1003,0 m kg *4.300 3.850 6.400 4.700 *8.900 6.800 *12.000 10.9501,5 m kg *4.700 3.700 6.300 4.550 9.150 6.500 *12.900 10.4000,0 m kg 5.250 3.800 6.150 4.450 8.800 6.200 *12.300 10.050

- 1,5 m kg *5.250 4.200 *5.800 4.450 *7.900 6.100 *10.600 10.000 *9.900 *9.900- 3,0 m kg *4.450 *4.450 *6.000 *6.000 *7.950 *7.950 *9.300 *9.300

2.90

0 m

m

7,5 m kg *2.700 *2.700 *4.500 *4.5006,0 m kg *2.600 *2.600 *3.900 *3.900 *5.400 *5.4004,5 m kg *2.600 *2.600 *5.400 4.400 *6.700 6.6003,0 m kg *2.700 *2.700 5.950 4.300 *8.500 6.300 *11.300 10.400 *18.150 *18.1501,5 m kg *2.950 *2.950 5.800 4.150 8.500 6.000 *12.650 9.7000,0 m kg *3.350 3.100 5.650 4.050 8.150 5.700 *12.650 9.250 *6.050 *6.050

- 1,5 m kg *4.050 3.350 5.600 3.950 7.950 5.500 *11.500 9.100 *9.300 *9.300- 3,0 m kg *4.600 4.000 *4.650 4.000 *6.900 5.550 *9.300 9.150 *11.450 *11.450

3.50

0 m

m

7,5 m kg *2.700 *2.700 *2.750 *2.7506,0 m kg *2.600 *2.600 *4.200 *4.2004,5 m kg *2.600 *2.600 *2.900 *2.900 *5.050 4.900 *5.500 *5.5003,0 m kg *2.700 *2.700 *4.000 3.400 *6.300 4.750 *7.900 6.950 *10.600 *10.6001,5 m kg *2.950 2.950 4.600 3.350 6.300 4.550 *8.900 6.600 *12.300 10.7000,0 m kg *3.300 3.100 4.500 3.250 6.150 4.400 8.950 6.300 *12.750 10.150 *6.600 *6.600

- 1,5 m kg *3.950 3.300 6.050 4.300 *8.600 6.050 *11.900 9.900 *8.900 *8.900 *5.300 *5.300- 3,0 m kg *4.400 3.800 *5.350 6.400 *7.350 6.000 *10.000 9.850 *12.550 *12.550 *8.350 *8.350

22


LIFTING CAPACITY

TWO-PIECE BOOM

* Load is limited by hydraulic capacity rather than tipping.Ratings are based on SAE Standard No. J1097.Rated loads do not exceed 87% of hydrau-lic lift capacity or 75% of tipping load.

B

C

When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights

– Reach from swing centre

– Bucket hook height

– Lifting capacities, including bucket

(550 kg), bucket linkage (122 kg) and

bucket cylinder (109 kg)

– Rating over front

– Rating over side

– Rating at maximum reach

A

HD counterweight

A

B

9,0 m 7,5 m 6,0 m 4,5 m

Arm length

3,0 m 1,5 m

Without stabilizer

Rear blade

1.80

0 m

m

7,5 m kg *5050 4.900 *7000 6.2506,0 m kg *4550 3.200 5.250 3.700 *7100 6.3004,5 m kg 3.650 2.500 5.150 3.600 *8450 5.900 *12000 11.4503,0 m kg 3.200 2.150 3.350 2.250 4.900 3.400 7.600 5.1001,5 m kg 3.050 2.050 3.250 2.150 4.650 3.150 7.200 4.7500,0 m kg 3.150 2.100 3.150 2.100 4.400 2.950 6.900 4.500

- 1,5 m kg 3.550 2.350 4.400 2.900 6.900 4.450 *12050 8.500- 3,0 m kg 7.050 4.600

2.40

0 m

m

7,5 m kg *4400 3.9006,0 m kg 3.900 2.700 5.450 3.8504,5 m kg 3.200 2.200 3.500 2.400 5.300 3.750 *7500 6.1003,0 m kg 2.850 1.900 3.400 2.300 5.000 3.500 8.100 5.5001,5 m kg 2.750 1.800 3.300 2.200 4.750 3.200 7.400 4.9500,0 m kg 2.800 1.850 3.150 2.100 4.500 3.000 7.000 4.600

- 1,5 m kg 3.000 1.950 3.150 2.050 4.400 2.900 6.900 4.500 *9150 8.450- 3,0 m kg 3.850 2.550 4.450 2.950 6.950 4.550 14.550 8.700

2.90

0 m

m

7,5 m kg *2800 *2800 *4150 3.9006,0 m kg *2600 2.350 *3200 2.500 *5150 3.9504,5 m kg *2550 1.900 3.550 2.450 5.400 3.800 *6300 6.3003,0 m kg 2.550 1.700 3.450 2.350 5.100 3.550 8.300 5.700 *13450 10.9001,5 m kg 2.450 1.600 3.300 2.200 4.750 3.250 7.550 5.050 *6350 *63500,0 m kg 2.500 1.600 3.150 2.100 4.500 3.000 7.050 4.600 *6950 *6950

- 1,5 m kg 2.750 1.750 3.100 2.000 4.350 2.850 6.850 4.450 *10200 8.400- 3,0 m kg 3.250 2.150 4.350 2.850 6.850 4.450 14.350 8.550

3.50

0 m

m

7,5 m kg *2700 2.7006,0 m kg *2550 2.050 3.650 2.550 *4500 4.0504,5 m kg 2.550 1.700 3.600 2.500 *5100 3.9003,0 m kg 2.300 1.500 2.400 1.550 3.450 2.400 5.200 3.600 *7650 5.900 *10850 *108501,5 m kg 2.200 1.400 2.350 1.500 3.300 2.200 4.850 3.300 7.650 5.1500,0 m kg 2.200 1.400 2.250 1.450 3.150 2.050 4.500 3.000 7.150 4.700 *7600 *7600

- 1,5 m kg 2.400 1.500 3.000 1.950 4.300 2.850 6.850 4.400 *9700 8.300 *5400 *5400- 3,0 m kg 2.800 1.800 3.000 1.950 4.250 2.750 6.750 4.350 *13700 8.350

1.80

0 m

m

7,5 m kg *5050 *5050 *7000 *70006,0 m kg *4550 3.650 *6600 4.250 *7100 *71004,5 m kg *4450 2.900 *7050 4.150 *8450 6.750 *12000 *120003,0 m kg *4600 2.550 5.750 2.650 *7850 3.900 *10300 5.9501,5 m kg *5050 2.400 5.600 2.550 8.200 3.650 *12000 5.5500,0 m kg 5.550 2.450 5.550 2.500 7.950 3.450 *12350 5.300

- 1,5 m kg 6.250 2.800 7.950 3.450 *11700 5.250 *12050 10.200- 3,0 m kg *9850 5.400

2.40

0 m

m

7,5 m kg *4400 *44006,0 m kg *4100 3.150 *5850 4.4004,5 m kg *4050 2.550 *5550 2.800 *6450 4.250 *7500 6.9503,0 m kg *4200 2.250 5.800 2.700 *7350 4.000 *9550 6.3501,5 m kg *4550 2.150 5.650 2.600 *8300 3.750 *11450 5.7500,0 m kg 4.900 2.200 5.550 2.500 8.050 3.500 *12350 5.400

- 1,5 m kg 5.450 2.400 5.500 2.450 7.900 3.400 *12150 5.250 *10950 10.150- 3,0 m kg *6600 3.000 *7800 3.450 *10850 5.350 *15400 10.400

2.90

0 m

m

7,5 m kg *2800 *2800 *4150 *41506,0 m kg *2600 *2600 *3200 2.850 *5150 4.5004,5 m kg *2550 2.250 *4950 2.850 *5850 4.350 *6300 *63003,0 m kg *2650 2.000 5.850 2.750 *6850 4.050 *8700 6.550 *13450 12.7001,5 m kg *2900 1.900 5.700 2.600 *7900 3.750 *10850 5.850 *6350 *63500,0 m kg *3250 1.950 5.550 2.450 8.100 3.550 *12100 5.400 *6950 *6950

- 1,5 m kg *3950 2.100 5.450 2.400 7.850 3.350 *12250 5.250 *10200 10.050- 3,0 m kg *5250 2.550 7.900 3.400 *11400 5.250 *15250 10.250

3.50

0 m

m

7,5 m kg *2750 *27506,0 m kg *2550 2.350 *3950 2.950 *4500 *45004,5 m kg *2550 2.000 *4750 2.900 *5100 4.4503,0 m kg *2650 1.800 *3350 1.850 *5450 2.750 *6250 4.150 *7650 6.750 *10850 *108501,5 m kg *2850 1.700 *3950 1.800 5.700 2.600 *7400 3.800 *9900 5.9500,0 m kg *3200 1.700 *3650 1.750 5.550 2.450 8.100 3.550 *11650 5.500 *7600 *7600

- 1,5 m kg *3800 1.850 5.400 2.350 7.850 3.350 *12200 5.200 *9750 *9750 *5400 *5400- 3,0 m kg *4900 2.150 5.400 2.300 7.800 3.300 *11800 5.150 *13700 10.050

23


A

B

9,0 m 7,5 m 6,0 m 4,5 m

Arm length

3,0 m 1,5 m

Rear outrigger

Outrigger + blade

Outrigger front + rear

1.80

0 m

m7,5 m kg *5.050 *5.050 *7.000 *7.0006,0 m kg *4.550 4.100 *6.600 4.750 *7.100 *7.1004,5 m kg *4.450 3.300 *7.050 4.650 *8.450 7.600 *12.000 *12.0003,0 m kg *4.600 2.900 *6.150 3.000 *7.850 4.400 *10.300 6.7501,5 m kg *5.050 2.750 6.300 2.900 *8.600 4.150 *12.000 6.3500,0 m kg *5.800 2.850 *6.000 2.850 *8.900 3.950 *12.350 6.100

- 1,5 m kg *6.950 3.200 *8.550 3.950 *11.700 6.050 *12.050 12.050- 3,0 m kg *9.850 6.250

2.40

0 m

m

7,5 m kg *4.400 *4.4006,0 m kg *4.100 3.550 *5.850 4.9004,5 m kg *4.050 2.900 *5.550 3.150 *6.450 4.800 *7.500 *7.5003,0 m kg *4.200 2.600 *6.250 3.050 *7.350 4.550 *9.550 7.2001,5 m kg *4.550 2.450 6.300 2.950 *8.300 4.250 *11.450 6.5500,0 m kg *5.200 2.500 6.200 2.850 *8.850 4.000 *12.350 6.200

- 1,5 m kg 6.100 2.800 6.150 2.800 *8.800 3.900 *12.150 6.050 *10.950 *10.950- 3,0 m kg *6.600 3.450 *7.800 3.950 *10.850 6.150 *15.400 12.250

2.90

0 m

m

7,5 m kg *2.800 *2.800 *4.150 *4.1506,0 m kg *2.600 *2.600 *3.200 *3.200 *5.150 5.0004,5 m kg *2.550 *2.550 *4.950 3.200 *5.850 4.850 *6.300 *6.3003,0 m kg *2.650 2.300 *5.900 3.100 *6.850 4.600 *8.700 7.400 *13.450 *13.4501,5 m kg *2.900 2.200 6.350 2.950 *7.900 4.300 *10.850 6.700 *6.350 *6.3500,0 m kg *3.250 2.250 6.200 2.800 *8.650 4.050 *12.100 6.250 *6.950 *6.950

- 1,5 m kg *3.950 2.450 6.100 2.750 *8.800 3.850 *12.250 6.050 *10.200 *10.200- 3,0 m kg *5.250 2.950 *8.250 3.900 *11.400 6.050 *15.250 12.100

3.50

0 m

m

7,5 m kg *2.750 *2.7506,0 m kg *2.550 *2.550 *3.950 3.350 *4.500 *4.5004,5 m kg *2.550 2.300 *4.750 3.250 *5.100 4.9503,0 m kg *2.650 2.050 *3.350 2.150 *5.450 3.150 *6.250 4.700 *7.650 7.600 *10.850 *10.8501,5 m kg *2.850 1.950 *3.950 2.100 *6.050 2.950 *7.400 4.350 *9.900 6.8000,0 m kg *3.200 2.000 *3.650 2.000 6.200 2.800 *8.300 4.050 *11.650 6.300 *7.600 *7.600

- 1,5 m kg *3.800 2.150 6.050 2.700 *8.750 3.850 *12.200 6.000 *9.750 *9.750 *5.400 *5.400- 3,0 m kg *4.900 2.500 6.050 2.700 *8.500 3.850 *11.800 5.950 *13.700 11.850

1.80

0 m

m

7,5 m kg *5.100 *5.100 *7.100 *7.1006,0 m kg *4.600 *4.600 *6.700 6.100 *7.250 *7.2504,5 m kg *4.500 4.250 *7.150 6.000 *8.600 *8.600 *12.150 *12.1503,0 m kg *4.700 3.800 *6.250 3.900 *8.000 5.700 *10.450 8.9001,5 m kg *5.100 3.650 6.200 3.800 *8.750 5.450 *12.200 8.4500,0 m kg *5.900 3.750 6.100 3.750 8.750 5.200 *12.550 8.200

- 1,5 m kg 6.900 4.200 *8.700 5.200 *11.900 8.150 *12.250 *12.250- 3,0 m kg *10.050 8.350

2.40

0 m

m

7,5 m kg *4.500 *4.5006,0 m kg *4.150 *4.150 *5.950 *5.9504,5 m kg *4.100 3.750 *5.600 4.100 *6.550 6.100 *7.600 *7.6003,0 m kg *4.250 3.400 6.350 4.000 *7.500 5.850 *9.750 9.4001,5 m kg *4.600 3.250 6.200 3.850 *8.400 5.550 *11.650 8.7000,0 m kg *5.250 3.350 6.100 3.750 8.850 5.300 *12.550 8.300

- 1,5 m kg 6.000 3.700 6.050 3.700 8.700 5.150 *12.350 8.150 *11.150 *11.150- 3,0 m kg *6.700 4.500 *7.950 5.250 *11.050 8.250 *15.650 *15.650

2.90

0 m

m

7,5 m kg *2.850 *2.850 *4.250 *4.2506,0 m kg *2.650 *2.650 *3.250 *3.250 *5.250 *5.2504,5 m kg *2.600 *2.600 *5.000 4.150 *5.950 *5.950 *6.400 *6.4003,0 m kg *2.700 *2.700 *6.000 4.000 *6.950 *5.900 *8.850 *8.850 *13.700 *13.7001,5 m kg *2.950 *2.950 6.250 3.850 *8.050 5.600 *11.000 8.850 *6.450 *6.4500,0 m kg *3.350 3.000 6.100 3.750 *8.800 5.300 *12.300 8.350 *7.050 *7.050

- 1,5 m kg *4.000 3.250 6.000 3.650 8.650 5.150 *12.450 8.150 *10.350 *10.350- 3,0 m kg *5.350 3.150 *8.400 5.150 *11.600 8.150 *15.450 *15.450

3.50

0 m

m

7,5 m kg *2.750 *2.7506,0 m kg *2.600 *2.600 *4.000 *4.000 *4.550 *4.5504,5 m kg *2.600 *2.600 *4.850 4.200 *5.200 *5.2003,0 m kg *2.700 *2.700 *3.400 2.850 *5.550 4.050 *6.350 6.000 *7.750 *7.750 *11.050 *11.0501,5 m kg *2.900 2.650 *4.000 2.800 *6.150 3.900 *7.500 5.650 *10.100 8.9500,0 m kg *3.250 2.650 *3.700 2.700 6.100 3.700 *8.450 5.350 *11.800 8.450 *7.700 *7.700

- 1,5 m kg *3.850 2.850 5.950 3.600 8.650 5.100 *12.450 8.100 *9.850 *9.850 *5.500 *5.500- 3,0 m kg *5.000 3.350 5.950 3.600 8.600 5.050 *12.000 8.050 *13.900 *13.800

1.80

0 m

m

7,5 m kg *5.100 *5.100 *7.100 *7.1006,0 m kg *4.600 *4.600 *6.700 *6.700 *7.250 *7.2504,5 m kg *4.500 *4.500 *7.150 7.150 *8.600 *8.600 *12.150 *12.1503,0 m kg *4.700 4.500 *6.250 4.700 *8.000 6.850 *10.450 *10.4501,5 m kg *5.100 4.350 6.350 4.600 *8.750 6.550 *12.200 10.4000,0 m kg *5.900 4.500 *6.100 4.500 9.000 6.350 *12.550 10.100

- 1,5 m kg *7.050 5.050 *8.700 6.300 *11.900 10.100 *12.250 *12.250- 3,0 m kg *10.050 *10.050

2.40

0 m

m

7,5 m kg *4.500 *4.5006,0 m kg *4.150 *4.150 *5.950 *5.9504,5 m kg *4.100 *4.100 *5.600 4.850 *6.550 *6.550 *7.600 *7.6003,0 m kg *4.250 4.050 *6.350 4.750 *7.500 6.950 *9.750 *9.7501,5 m kg *4.600 3.900 6.400 4.650 *8.400 6.650 *11.650 10.6500,0 m kg *5.250 4.000 6.250 4.500 *9.000 6.400 *12.550 10.250

- 1,5 m kg 6.150 4.450 6.250 4.500 8.950 6.300 *12.350 10.100 *11.150 *11.150- 3,0 m kg *6.700 5.450 *7.950 6.350 *11.000 10.200 *15.650 *15.650

2.90

0 m

m

7,5 m kg *2.850 *2.850 *4.250 *4.2506,0 m kg *2.650 *2.650 *3.250 *3.250 *5.250 *5.2504,5 m kg *2.600 *2.600 *5.000 4.500 *5.950 *5.950 *6.400 *6.4003,0 m kg *2.700 *2.700 *6.000 4.400 *6.950 6.500 *8.850 *8.850 *13.700 *13.7001,5 m kg *2.950 *2.950 5.900 4.250 *8.050 6.150 *11.000 10.000 *6.450 *6.4500,0 m kg *3.350 3.250 5.750 4.100 8.400 5.850 *12.300 9.450 *7.050 *7.050

- 1,5 m kg *4.000 3.550 5.700 4.000 8.200 5.700 *12.450 9.200 *10.350 *10.350- 3,0 m kg *5.350 4.250 8.250 5.700 *11.600 9.200 *15.450 *15.450

3.50

0 m

m

7,5 m kg *2.750 *2.7506,0 m kg *2.600 *2.600 *4.000 *4.000 *4.550 *4.5504,5 m kg *2.600 *2.600 *4.850 *4.850 *5.200 *5.2003,0 m kg *2.700 *2.700 *3.400 *3.400 *5.550 4.850 *6.350 *6.350 *7.750 *7.750 *11.050 *11.0501,5 m kg *2.900 *2.900 *4.000 3.350 *6.150 4.650 *7.500 6.750 *10.100 *10.1000,0 m kg *3.250 *3.250 *3.700 3.300 6.250 4.500 *8.450 6.450 *11.800 10.400 *7.700 *7.700

- 1,5 m kg *3.850 3.500 6.150 4.350 8.900 6.250 *12.450 10.050 *9.850 *9.850 *5.500 *5.500- 3,0 m kg *5.000 4.050 6.100 4.350 *8.650 6.150 *12.000 9.950 *13.900 *13.900

Materials and specifications are subject to change without notice.is a trademark of Komatsu Ltd. Japan.

Komatsu EuropeInternational NVMechelsesteenweg 586B-1800 VILVOORDE (BELGIUM)Tel. +32-2-255 24 11Fax +32-2-252 19 81www.komatsu.eu

VESS001900 10/2007

Printed in Europe – This specifi cation sheet may contain attachments and optional equipment that are not available in your area.Please consult your local Komatsu distributor for those items you may require. Materials and specifi cations are subject to change without notice.

PW220-7

Call the experts

• Komatsu SAA6D107E-1, 125 kW

turbocharged common rail direct

injection diesel engine, EU Stage IIIA

compliant

• Double element type air cleaner

with dust indicator and auto dust

evacuator

• Suction type cooling fan

• Automatic fuel line de-aeration

• Engine key stop

• Engine ignition can be password

secured on request

• Engine overheat prevention system

• Auto-deceleration function

• Automatic engine warm-up system

• Alternator 24 V/60 A

• Batteries 2 × 12 V/120 Ah

• Starter motor 24 V/5,5 kW

• Standard counterweight

• Electronic closed-centre load

sensing (E-CLSS) hydraulic system

(HydrauMind)

• Pump and engine mutual control

(PEMC) system

• Multi-function colour monitor with

equipment management monitoring

system (EMMS)

• 4-working mode selection system;

Power mode, economy mode, breaker

mode and lifting mode

• PowerMax function

• Adjustable PPC wrist control levers

with 3 button control and proportional

attachment control slider for arm,

boom, bucket and swing

• Additional hydraulic circuit (HCU-B)

• Fully automatic 3-speed transmission

driving through front and rear

planetary axles

• Orbitrol type hydraulic steering acting

on front wheels

• Oscilating front axle (11°) with

automatic and manual cylinder

locking

• Dual circuit hydraulic brakes with

outboard wet multi-disc service

brakes

• Spring actuated park brake

(hydraulic release) incorporated into

transmission

• SpaceCab™, highly pressurized and

tightly sealed viscous mounted cab

with tinted safety glass windows,

pull-up type front window with

locking device, heated rear window,

removable lower window, front

window wiper with intermittent

feature, sun blind roller, magazine

rack behind seat, 12 V power supply,

cigarette lighter, ashtray, fl oor mat,

machine cab handrails, suspension

seat with tiltable left hand console,

automatic weight adjustment,

adjustable arm rests and retractable

seat belt, hot and cool box

• KOMTRAX™ Komatsu Tracking

System

• Parts book and operator manual

• Lockable fuel cap and covers

• Fuel supply pump

• Overload warning device

• Boom safety valves

• Dozer blade cylinder guard

• Climate control/Air conditioning

• Centralised greasing system

• Radio cassette preparation

• Toolkit and spare parts for fi rst

service

• Single chassis tool box

• Standard colour scheme and decals

• 2,75 m wide undercarriage

• Mono boom

• Two-piece boom

• 1,8 m; 2,4 m; 2,9 m; 3,5 m arms

• Additional hydraulic circuit (HCU-C)

• Parallel blade (front and/or rear)

• 2 or 4 outriggers with cylinder

protection (front and/or rear)

• Large bore bucket cylinders

(1,8 m and 2,4 m arms only)

• Four sets of tyre and rim (twin tyre)

10.00-20 14 PR

• Four sets of tyre and rim (twin tyre)

11.00-20 16 PR

• Four sets of tyre and rim (single tyre)

18.00 R22

• Nokian twin tyres 10-20

• Nokian twin tyres 11-20

• Automatic greasing system

• Quick-coupler piping

• Komatsu quick couplers

• Komatsu buckets

• Transmission guard

• Clamshell grip bar

• Adjust cylinder safety valve

• Arm cylinder safety valve

• Heated air suspension seat

• Radio-cassette

• Lower wiper

• OPG Level II front guard (FOPS)

• OPG Level II top guard (FOPS)

• Additional RH boom lamp

• Beacon + rear facing cab lamp

• Additional large capacity cab roof

lights (2)

• Bio oil

• Rain visor (not for use with OPG)

• Additional chassis tool box

• Customized paint

• HD counterweight

HYDRAULIC WHEELED EXCAVATOR

STANDARD EQUIPMENT

OPTIONAL EQUIPMENT

pw220-7 - komatsu latin america - komatsuklc.com1].pdf · with its newly developed komatsu ecot3...

Documents