pulley lagging pulley lagging - asgco · pulley lagging pulley lagging providing the world bulk...
Post on 15-Aug-2020
37 Views
Preview:
TRANSCRIPT
PULLEY LAGGINGPulley Lagging
Providing the World Bulk Material Handling Industrywith Productive, Safe and Reliable “Complete Conveyor Solutions.”
Providing the World Bulk Material Handling Industrywith Productive, Safe and Reliable “Complete Conveyor Solutions.”
®©2/2018 ASGCO “Complete Conveyor Solutions” 301 Gordon Street Allentown, PA 18102 800.344.4000 610.821.0216 610.778.8991| | T | T | FX
™Arrowhead proved to be 12% more abrasion resistant then the leading competition.
½” Thick x 10” x 21.33’ Drive Lagging ASG-10X21.33-1/2-TRL 42
¾” Thick x 10” x 21.33’ Drive Lagging ASG-10X21.33-3/4-TRL 60
½” Thick x 10” x 21.33’ Plain Lagging ASG-10X21.33-1/2-TRL-PLN 48
½” Thick x 10” x 21.33’ Smooth Lagging ASG-10X21.33-1/2-TRL-SM 52
½” Thick x 10” x 21.33’ Non-Drive Lagging ASG-10X278-1/2-TRL 626
½” Thick x 10” x 21.33’ Drive Lagging MSHA ASG-10X21.33-1/2-MSHA-TRL 42
¾” Thick x 10” x 21.33’ Drive Lagging MSHA ASG-10X21.33-3/4-MSHA-TRL 56
½” Thick x 10” x 278’ Drive Lagging MSHA ASG-10X278-MSHA-TRL 626
½” Thick x 10” x 21.33’ Plain Lagging MSHA ASG-10X21.33-1/2-MSHA-PLN 42
™Arrowhead Rubber Lagging
Description Part Number Wt. Lbs.
Amount of Rolls Needed to Lag “X” Pulley
Pulley diameter x 3.14 = Pulley circumference™Pulley Circumference / 10 = Number of Arrowhead lagging strips
Number of strips needed x (pulley face +2) = Number of total inches of rubber lagging
Number of total inches of rubber lagging / 255 = Number of rolls of rubber
™Arrowhead Drive & Smooth Rubber Lagging
Amount of Cement Needed to Lag “X” Pulley Size
Pulley diameter x 3.14 = Pulley circumference
Circumference face width / 144 = Pulley surface area in sq. ft.
Pulley surface area in sq. ft. / 10 = Amount of cement in quarters needed
Smooth Lagging
0.25
0.26
0.27
0.28
0.29
0.3
0.31
0.32
1000 3000
Type X™Arrowhead
• Taber Abrasion, ASTMD 3389-94 (99)• H18 wheels, 1000 gram load per wheel, for 3000 cycles• All tests were completed by Akron Rubber Development Laboratory, Inc. - www.ardl.com
Total Amount of Material Loss
Taber Abrasion Tests
Design Features - Tiles
• High grade aluminum oxide ceramic• Tile fully enclosed by rubber• Rounded corners allow for better adhesion between the rubber and the tile
ISOMETRIC VIEW
ASG-10X24-CL 24" 610 1/2" 24-7/8" 632 9 229
ASG-10X30-CL 30" 763 1/2" 31-1/4" 794 11 279
ASG-10X36-CL 36" 915 1/2" 36-1/4" 921 13 330
ASG-10X42-CL 42" 1067 1/2" 41-1/8" 1045 15 381
ASG-10X48-CL 48" 1220 1/2" 48-1/2" 1232 17 432
ASG-10X54-CL 54" 1372 1/2" 55-7/8" 1419 19 483
ASG-10X60-CL 60" 1524 1/2" 60-3/4" 1543 21 533
ASG-10X72-CL 72" 1829 1/2" 73-1/8" 1857 23 584
ASG-10X84-CL 84" 2134 1/2" 83-1/8" 2111 33 838
™Arrowhead Ceramic Pulley Lagging™Arrowhead Ceramic Pulley Lagging provides the solution when conventional
rubber lagging fails to correct a belt slippage problem and/or when rubber lagging wears prematurely. Our unique Arrowhead ceramic is designed for the highest drive factors unlike the conventional square tiles.
• Increase Productivity - by delivering increased traction between the belt and pulley. This allows for lower belt tension than with rubber lagging.
• Precision Molded - Only product providing diagonal grooves on ceramic tile lagging for self-cleaning
™• Improved Belt Tracking - due to the Arrowhead patterns self-cleaning ability, which reduces material build-up and thereby eliminates the major source of misalignment.
• Bonding Strength - that is superior to others, due to 1/8” (3mm) of our neoprene compound vulcanized into bottom-side of the pulley lagging.
• Extreme Durability - in high feed rates and high conveying speeds and abrasive or highly wet or dry applications as seen in below ground and above ground mining.
• Easy Installation - can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each strip is 10” (250mm) wide x pulley face (see chart on back).
• 3 Year Warranty
™Arrowhead Drive & Smooth Rubber Pulley Lagging™Arrowhead Drive and Smooth Pulley Lagging is the solution, in an application
where rubber is the answer, to help eliminate slippage, increase pulley life and to improveproduction. A specially formulated combination of synthetic, natural, and neoprene rubber compounds provides our pulley lagging with excellent gripping strength and abrasion resistance.
• Increase Productivity - by delivering increased traction between the belt and pulley, and increasing pulley life and reducing build-up.
• Bonding Strength - that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom side of the lagging.
• Easy Installation - can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each roll is ½” or ¾” thick x 10” wide by 21.3’ long, or in 278’ rolls. (See chart on back)
PULLEY LAGGING PULLEY LAGGING
1 2
™Arrowhead Nat Ceramic Lagging Information
Part Number BWin
BWmm
Thick Ceramicin
Ceramicmm
Rubberin
Rubbermm
Ceramic + 17 = Total Length
™Arrowhead MSHA Ceramic Lagging Information
Part Number BWin
ASG-10X24-MSHA-CL 24 610 1/2" 24.41 620 47.24 1200
ASG-10X30-MSHA-CL 30 762 1/2" 30.71 780 53.15 1350
ASG-10X36-MSHA-CL 36 915 1/2" 37.01 940 59.06 1500
ASG-10X42-MSHA-CL 42 1067 1/2" 43.31 1100 64.96 1650
ASG-10X48-MSHA-CL 48 1220 1/2" 47.24 1200 70.87 1800
ASG-10X54-MSHA-CL 54 1372 1/2" 56.69 1440 78.74 2000
ASG-10X60-MSHA-CL 60 1524 1/2" 62.99 1600 86.61 2200
ASG-10X72-MSHA-CL 72 1829 1/2" 72.83 1850 94.49 2400
ASG-10X84-MSHA-CL 84 2134 1/2" 84.00 2134 101.00 2565
ASG-1-10X60-MSHA-CL 60 1524 1" 62.99 1600 60.61 1539
ASG-1-10X72-MSHA-CL 72 1829 1" 72.83 1850 94.49 2400
ASG-1-10X84-MSHA-CL 84 2134 1" 82.09 2085 102.36 2600
Pulley Diameter
Number ofStripes
™Arrowhead Ceramic Lagging
4 5 6 6 7 7 8 9 9 10 11 11 12 12 13 14 16 17 19
Thick Ceramicin
Ceramicmm
Rubberin
Rubbermm
BWmm
12” 14” 16” 18” 20” 22” 24” 26” 28” 30” 32” 34” 36” 38” 40” 42” 48” 54” 60”
Per-Buffed Thickness Better than 0.01”
Side Profile
Edge ProfileTaper close seam joints
on pulley diameter.
Natural & MSHA 1C-174/2 FRAS Grade Pulley Lagging
Rubber Hardness
Lagging to PulleyShell Bond Strength
Rubber AbrasionResistance (DIN)
Elongation
Tensile
62 Shore A or 45 Shore AC
Exceeds 91 PIW
81
510%
2900 PSI
Typical Specification
.12”NEOPRENE
.12”NEOPRENE
.5”
2.25”
.60”.24”
CERAMIC .20”SBR
™Semi-Ceramic Pulley Lagging
® ™ASGCO has added a Semi-Ceramic Pulley Lagging to their product line, featuring 40% coverage for smaller pulley’s, non-drive pulley’s and bend pulley’s.
® ™ASGCO ’s Semi-Ceramic Pulley Lagging provides the solution when conventional rubber lagging fails to correct belt spillage and wears prematurely.
• Newly Improved Ceramic Tile – provides robust performance in dry, wet, or muddy applications.
• High Grade – aluminum oxide ceramic
• Bonding Strength – that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom-side of the lagging.
• Pre-Chemical Backing – for ease in installation
• Increase Productivity – by delivering increased traction between the conveyor belt and pulley, allowing for lower belt tension than with rubber lagging.
• Reduce Down Time – on non drive pulleys, where pulley change-out due to excessive wear is difficult.
• Rounded corners – allow for better adhesion between the rubber and the tile
Abrasion resistanttiles fully enclosed by rubber
ASG-15x32.81-SCRL 15” (385mm) wide x 32.81’ (10M) long
Part Number Roll Dimension (120lbs)
™Semi-Ceramic Pulley Lagging
Semi-Ceramic Tile Statistics
Total surface area of the ceramic as a percentage for the total? 50%
Width of each tile? 0.787” (20mm)
Length of tile? 0.787” (20mm)
Total thickness of ceramic? 0.197” (5mm)
Percent of ceramic are raised? 27%
Height of ceramic nubs that extend above the ceramic tile? .0625” (1.6mm)
Diameter of ceramic nub? 0.118” (3mm)
Number of nubs? 13 per tile
.787”
.787”
Available in rolls - use only what is needed
The only product providing diagonal grooves on ceramictile lagging for self-cleaning.
Design Features - Tiles
• High grade aluminum oxide ceramic• Tile fully enclosed by rubber• Rounded corners allow for better adhesion between the rubber and the tile
ISOMETRIC VIEW
ASG-10X24-CL 24" 610 1/2" 24-7/8" 632 9 229
ASG-10X30-CL 30" 763 1/2" 31-1/4" 794 11 279
ASG-10X36-CL 36" 915 1/2" 36-1/4" 921 13 330
ASG-10X42-CL 42" 1067 1/2" 41-1/8" 1045 15 381
ASG-10X48-CL 48" 1220 1/2" 48-1/2" 1232 17 432
ASG-10X54-CL 54" 1372 1/2" 55-7/8" 1419 19 483
ASG-10X60-CL 60" 1524 1/2" 60-3/4" 1543 21 533
ASG-10X72-CL 72" 1829 1/2" 73-1/8" 1857 23 584
ASG-10X84-CL 84" 2134 1/2" 83-1/8" 2111 33 838
™Arrowhead Ceramic Pulley Lagging™Arrowhead Ceramic Pulley Lagging provides the solution when conventional
rubber lagging fails to correct a belt slippage problem and/or when rubber lagging wears prematurely. Our unique Arrowhead ceramic is designed for the highest drive factors unlike the conventional square tiles.
• Increase Productivity - by delivering increased traction between the belt and pulley. This allows for lower belt tension than with rubber lagging.
• Precision Molded - Only product providing diagonal grooves on ceramic tile lagging for self-cleaning
™• Improved Belt Tracking - due to the Arrowhead patterns self-cleaning ability, which reduces material build-up and thereby eliminates the major source of misalignment.
• Bonding Strength - that is superior to others, due to 1/8” (3mm) of our neoprene compound vulcanized into bottom-side of the pulley lagging.
• Extreme Durability - in high feed rates and high conveying speeds and abrasive or highly wet or dry applications as seen in below ground and above ground mining.
• Easy Installation - can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each strip is 10” (250mm) wide x pulley face (see chart on back).
• 3 Year Warranty
™Arrowhead Drive & Smooth Rubber Pulley Lagging™Arrowhead Drive and Smooth Pulley Lagging is the solution, in an application
where rubber is the answer, to help eliminate slippage, increase pulley life and to improveproduction. A specially formulated combination of synthetic, natural, and neoprene rubber compounds provides our pulley lagging with excellent gripping strength and abrasion resistance.
• Increase Productivity - by delivering increased traction between the belt and pulley, and increasing pulley life and reducing build-up.
• Bonding Strength - that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom side of the lagging.
• Easy Installation - can be done in place, on plant site, at your local distributor or at the pulley manufacturer. Each roll is ½” or ¾” thick x 10” wide by 21.3’ long, or in 278’ rolls. (See chart on back)
PULLEY LAGGING PULLEY LAGGING
1 2
™Arrowhead Nat Ceramic Lagging Information
Part Number BWin
BWmm
Thick Ceramicin
Ceramicmm
Rubberin
Rubbermm
Ceramic + 17 = Total Length
™Arrowhead MSHA Ceramic Lagging Information
Part Number BWin
ASG-10X24-MSHA-CL 24 610 1/2" 24.41 620 47.24 1200
ASG-10X30-MSHA-CL 30 762 1/2" 30.71 780 53.15 1350
ASG-10X36-MSHA-CL 36 915 1/2" 37.01 940 59.06 1500
ASG-10X42-MSHA-CL 42 1067 1/2" 43.31 1100 64.96 1650
ASG-10X48-MSHA-CL 48 1220 1/2" 47.24 1200 70.87 1800
ASG-10X54-MSHA-CL 54 1372 1/2" 56.69 1440 78.74 2000
ASG-10X60-MSHA-CL 60 1524 1/2" 62.99 1600 86.61 2200
ASG-10X72-MSHA-CL 72 1829 1/2" 72.83 1850 94.49 2400
ASG-10X84-MSHA-CL 84 2134 1/2" 84.00 2134 101.00 2565
ASG-1-10X60-MSHA-CL 60 1524 1" 62.99 1600 60.61 1539
ASG-1-10X72-MSHA-CL 72 1829 1" 72.83 1850 94.49 2400
ASG-1-10X84-MSHA-CL 84 2134 1" 82.09 2085 102.36 2600
Pulley Diameter
Number ofStripes
™Arrowhead Ceramic Lagging
4 5 6 6 7 7 8 9 9 10 11 11 12 12 13 14 16 17 19
Thick Ceramicin
Ceramicmm
Rubberin
Rubbermm
BWmm
12” 14” 16” 18” 20” 22” 24” 26” 28” 30” 32” 34” 36” 38” 40” 42” 48” 54” 60”
Per-Buffed Thickness Better than 0.01”
Side Profile
Edge ProfileTaper close seam joints
on pulley diameter.
Natural & MSHA 1C-174/2 FRAS Grade Pulley Lagging
Rubber Hardness
Lagging to PulleyShell Bond Strength
Rubber AbrasionResistance (DIN)
Elongation
Tensile
62 Shore A or 45 Shore AC
Exceeds 91 PIW
81
510%
2900 PSI
Typical Specification
.12”NEOPRENE
.12”NEOPRENE
.5”
2.25”
.60”.24”
CERAMIC .20”SBR
™Semi-Ceramic Pulley Lagging
® ™ASGCO has added a Semi-Ceramic Pulley Lagging to their product line, featuring 40% coverage for smaller pulley’s, non-drive pulley’s and bend pulley’s.
® ™ASGCO ’s Semi-Ceramic Pulley Lagging provides the solution when conventional rubber lagging fails to correct belt spillage and wears prematurely.
• Newly Improved Ceramic Tile – provides robust performance in dry, wet, or muddy applications.
• High Grade – aluminum oxide ceramic
• Bonding Strength – that is superior to others, due to 3mm of our neoprene compound vulcanized into bottom-side of the lagging.
• Pre-Chemical Backing – for ease in installation
• Increase Productivity – by delivering increased traction between the conveyor belt and pulley, allowing for lower belt tension than with rubber lagging.
• Reduce Down Time – on non drive pulleys, where pulley change-out due to excessive wear is difficult.
• Rounded corners – allow for better adhesion between the rubber and the tile
Abrasion resistanttiles fully enclosed by rubber
ASG-15x32.81-SCRL 15” (385mm) wide x 32.81’ (10M) long
Part Number Roll Dimension (120lbs)
™Semi-Ceramic Pulley Lagging
Semi-Ceramic Tile Statistics
Total surface area of the ceramic as a percentage for the total? 50%
Width of each tile? 0.787” (20mm)
Length of tile? 0.787” (20mm)
Total thickness of ceramic? 0.197” (5mm)
Percent of ceramic are raised? 27%
Height of ceramic nubs that extend above the ceramic tile? .0625” (1.6mm)
Diameter of ceramic nub? 0.118” (3mm)
Number of nubs? 13 per tile
.787”
.787”
Available in rolls - use only what is needed
The only product providing diagonal grooves on ceramictile lagging for self-cleaning.
PULLEY LAGGINGPulley Lagging
Providing the World Bulk Material Handling Industrywith Productive, Safe and Reliable “Complete Conveyor Solutions.”
Providing the World Bulk Material Handling Industrywith Productive, Safe and Reliable “Complete Conveyor Solutions.”
®©2/2018 ASGCO “Complete Conveyor Solutions” 301 Gordon Street Allentown, PA 18102 800.344.4000 610.821.0216 610.778.8991| | T | T | FX
™Arrowhead proved to be 12% more abrasion resistant then the leading competition.
½” Thick x 10” x 21.33’ Drive Lagging ASG-10X21.33-1/2-TRL 42
¾” Thick x 10” x 21.33’ Drive Lagging ASG-10X21.33-3/4-TRL 60
½” Thick x 10” x 21.33’ Plain Lagging ASG-10X21.33-1/2-TRL-PLN 48
½” Thick x 10” x 21.33’ Smooth Lagging ASG-10X21.33-1/2-TRL-SM 52
½” Thick x 10” x 21.33’ Non-Drive Lagging ASG-10X278-1/2-TRL 626
½” Thick x 10” x 21.33’ Drive Lagging MSHA ASG-10X21.33-1/2-MSHA-TRL 42
¾” Thick x 10” x 21.33’ Drive Lagging MSHA ASG-10X21.33-3/4-MSHA-TRL 56
½” Thick x 10” x 278’ Drive Lagging MSHA ASG-10X278-MSHA-TRL 626
½” Thick x 10” x 21.33’ Plain Lagging MSHA ASG-10X21.33-1/2-MSHA-PLN 42
™Arrowhead Rubber Lagging
Description Part Number Wt. Lbs.
Amount of Rolls Needed to Lag “X” Pulley
Pulley diameter x 3.14 = Pulley circumference™Pulley Circumference / 10 = Number of Arrowhead lagging strips
Number of strips needed x (pulley face +2) = Number of total inches of rubber lagging
Number of total inches of rubber lagging / 255 = Number of rolls of rubber
™Arrowhead Drive & Smooth Rubber Lagging
Amount of Cement Needed to Lag “X” Pulley Size
Pulley diameter x 3.14 = Pulley circumference
Circumference face width / 144 = Pulley surface area in sq. ft.
Pulley surface area in sq. ft. / 10 = Amount of cement in quarters needed
Smooth Lagging
0.25
0.26
0.27
0.28
0.29
0.3
0.31
0.32
1000 3000
Type X™Arrowhead
• Taber Abrasion, ASTMD 3389-94 (99)• H18 wheels, 1000 gram load per wheel, for 3000 cycles• All tests were completed by Akron Rubber Development Laboratory, Inc. - www.ardl.com
Total Amount of Material Loss
Taber Abrasion Tests
top related