projects - the artful inker · hoot hoot hooray gift tags bird ballad thank you tag sail away...
Post on 21-Aug-2020
3 Views
Preview:
TRANSCRIPT
Projects:
#Elfie Christmas Tags
Nature’s Beauty Tags
Wrapped in Plaid Itty Bitty Christmas Tags
Seasons Greetings Wine Tags
Night Before Christmas Tags
Hoot Hoot Hooray Gift Tags
Bird Ballad Thank You Tag
Sail Away Birthday Tag
Hello/Set Sail Tags
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 1 of 29
#Elfie Christmas Tags
Supplies:
Stamp Set: #Elfie
Ink/Coloring Tools: Inks: Tuxedo Black Memento, Balmy Blue, Pool Party, Petal Pink, Soft Sea Foam, Stampin’ Blends: Color Lifter, Ivory, Granny Apple Green Combo, Poppy Parade Combo, Daffodil Delight Combo, Smoky Slate Light
Paper: Thick Whisper White, Sahara Sand
Embellishments: Whisper White Flax Ribbon, Nature’s Twine, Ice Stampin’ Glitter, Snowflake Sequins
Tools: Scalloped Tag Topper Punch, Detailed Trio Punch, Sprig Punch, Paper Snips, Take Your Pick Tool
Adhesives: Multipurpose Liquid Glue, Fine Tip Glue, Dimensionals, Tear & Tape
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 2 of 29
Measurements Imperial ★ Thick Whisper White
○ All Tags: 2” x 4-⅛”
★ Whisper White Flax Ribbon (cut along the middle to make thinner) ○ All Tags: 5-⅞” x 5/16”
★ Nature’s Twine (seperate a few strands to make thinner) ○ Tag (a) & (d): Mint Macaron 7-⅞” ○ Tag (b): Grapefruit Grove 7-⅞” ○ Tag (c): Crumb Cake 7-⅞”
Measurements Metric ★ Thick Whisper White
○ All Tags: 5cm x 10.5cm
★ Whisper White Flax Ribbon (cut along the middle to make thinner) ○ All Tags: 15cm x 0.8cm
★ Nature’s Twine (seperate a few strands to make thinner) ○ Tag (a) & (d): Mint Macaron 20cm ○ Tag (b): Grapefruit Grove 20cm ○ Tag (c): Crumb Cake 20cm
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 3 of 29
Tag (a)
Directions:
1. Stamp the ‘No Peeking’ design in Tuxedo Black.
2. Stamp the snowflakes in Balmy Blue and Pool Party inks, some in 2nd generation ink.
3. Punch the top with Scalloped Tag Topper design.
4. Colour the elf in Poppy Parade Combo, Daffodil Delight Combo, Granny Apple Green
Combo, Smoky Slate and Ivory Stampin’ Blends Markers.
5. Add Snowflake Sequins with Fine Tip Glue.
6. Add thinned White Flax Ribbon through the top and tie a bow with the thinned out Mint
Macaron Nature’s Twine.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 4 of 29
Tag (b)
Directions:
1. Stamp the elf and sentiment in Tuxedo Black on another Whisper White card piece.
2. Colour the elf in Poppy Parade Combo, Daffodil Delight Combo, Granny Apple Green
Combo, Smoky Slate and Ivory Stampin’ Blends Markers.
3. Fussy cut both the elf and sentiment with Paper Snips.
4. Stamp the snowflakes in Soft Sea Foam and Petal Pink inks.
5. Add a few dots of Multipurpose Liquid Glue on the front and Tear & Tape along the
bottom. Cover with Ice Stampin’ Glitter
6. Punch the top with Scalloped Tag Topper design.
7. Punch Sahara Sand card with Sprig Punch and adhere on the tag.
8. Add Snowflake Sequins with Fine Tip Glue on the punched sprigs.
9. Adhere elf with Dimensionals and sentiment with Multipurpose Liquid Glue.
10. Add thinned White Flax Ribbon through the top and tie a bow with the thinned out
Grapefruit Grove Nature’s Twine.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 5 of 29
Tag (c)
Directions:
1. Stamp Santa’s Workshop elf, small gift and large gift (without the other elf standing on
top) in Tuxedo Black on another Whisper White card piece.
2. Colour these in Poppy Parade Combo, Daffodil Delight Combo, Granny Apple Green
Combo, Smoky Slate and Ivory Stampin’ Blends Markers.
3. Fussy cut all coloured images with Paper Snips.
4. Add Multipurpose Liquid Glue on areas of the sign, hat, trim and large gift box then cover
with Ice Stampin’ Glitter.
5. Stamp the snowflakes in Pool Party and small gift box in Petal Pink inks, a few in 2nd
generation ink.
6. Punch the top and opposite corners with Detailed Trio Punch.
7. Adhere the gift boxes on the tag with Multipurpose Liquid Glue and the elf with
Dimensionals.
8. Add thinned White Flax Ribbon through the top and tie a bow with the thinned out Crumb
Cake Nature’s Twine.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 6 of 29
Tag (d)
Directions:
1. Stamp elf on gift and sentiment in Tuxedo Black on another Whisper White card piece.
2. Colour the elf in Poppy Parade Combo, Daffodil Delight Combo, Granny Apple Green
Combo, Smoky Slate and Ivory Stampin’ Blends Markers.
3. Fussy cut the elf and sentiment with Paper Snips.
4. Add Multipurpose Liquid Glue on the hat, trim and bottom of sentiment then cover with
Ice Stampin’ Glitter.
5. Stamp the snowflakes in Petal Pink and small gift box in Soft Sea Foam inks, a few in
2nd generation ink.
6. Punch the top and opposite corners with Detailed Trio Punch.
7. Adhere the elf and sentiment with Dimensionals.
8. Add thinned White Flax Ribbon through the top and tie a bow with the thinned out Mint
Macaron Nature’s Twine.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 7 of 29
Nature’s Beauty Tags
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 8 of 29
Supplies:
Stamp Set (or bundle): Nature’s Beauty, Itty Bitty Christmas, Birch
Ink/Coloring Tools: Seaside Spray, Night of Navy, Soft Suede, Early Espresso, Crumb Cake, Crushed Curry, Cajun Craze, Versamark
Paper: Whisper White, Very Vanilla, Seaside Spray, Pretty Peacock, Merry Merlot, Come To Gather designer paper
Embellishments: (ribbon, sequins, embossing powder, embossing paste - think consumable)
Gold Metallic Edged Ribbon, Seaside Spray Metallic Ribbon, Pretty Peacock Scalloped Linen Ribbon, Braided Linen Trim, Gold Stampin’ Emboss Powder, Clear Stampin’ Emboss Powder, Ice Stampin’ Glitter
Tools: Delightful Tag Topper Punch, 1” Circle Punch, Layering Ovals Dies, Stitched Shapes Dies, Heat Tool, Embossing Buddy, Aqua Painter, Stampin’ Sponges, Paper Snips
Adhesives: Stampin’ Dimensionals, Fine Tip Glue Pen, Multipurpose Liquid Glue
Measurements Metric ★ Whisper White
○ Tag 4: 5cm x 14cm ○ Tag 3 die cut: 6cm x 8.5cm
★ Very Vanilla ○ Tag 1: 5cm x 14cm
■ Sentiment Tag 1: .8cm x 4.8cm ○ Tag 2: 5cm x 14cm
★ Merry Merlot ○ Tag 3: 5cm x 14cm
★ Pretty Peacock: ○ Tag 2 Layer: 4cm x 7cm
★ Seaside Spray: ○ Tag 1 layer: 1cm x 5cm
★ Come to Gather 12” x 12” Designer Series Paper ○ Tag 2 Layer: 5cm x 6.4cm ○ Tag 3 Layer: 4.5cm x 10.3cm
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 9 of 29
Measurements Imperial ★ Whisper White
○ Tag 4: 2” x 5-½” ○ Tag 3 die cut: 2-¼” x 3-¼”
★ Very Vanilla ○ Tag 1: 2” x 5-½”
■ Sentiment Tag 1: 5/16” x 1-15/16” ○ Tag 2: 2” x 5-½”
★ Merry Merlot ○ Tag 3: 2” x 5-½”
★ Pretty Peacock: ○ Tag 2 Layer: 1-½” x 2-¾”
★ Seaside Spray: ○ Tag 1 layer: ⅜” x 2”
★ Come to Gather 12” x 12” Designer Series Paper ○ Tag 2 Layer: 2” x 2-½” ○ Tag 3 Layer: 1-3/4” x 4”
Directions Tag 1:
1. Punch the top of your Very Vanilla tag strip with the Delightful Tag Topper Punch.
2. With your Aqua Painter add a light zigzag wash of Seaside Spray down the front. Blot, if
necessary, to keep from saturating the cardstock.
3. Stamp the sentiment from Itty Bitty Christmas in Seaside Spray on the narrow strip of
Very Vanilla.
4. On the dry tag, stamp three pairs of trees from Nature’s Beauty in Early Espresso.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 10 of 29
5. Add lines of Fine Tip Glue between the lines around the trees and sprinkle with Ice
Stampin’ Glitter. Shake off excess after the glue has dried.
6. Adhere the sentiment to the Seaside Spray strip with Multipurpose Glue.
7. Adhere the sentiment to the tag with Dimensionals.
8. Add Gold Edge Metallic Ribbon at the top to finish.
Directions Tag 2:
1. Punch the top of your Very Vanilla tag strip with the Delightful Tag Topper Punch.
2. Ink the Birch stamp with Versamark and stamp the tag. Then heat emboss in gold.
3. Stamp the bunny from Nature’s Beauty in Crumb Cake on a scrap of Very Vanilla.
4. Cut out the bunny and the Pretty Peacock layer with Layering Ovals.
5. Adhere the Come to Gather layer with Multipurpose Glue.
6. Adhere a zigzag of Scalloped Lace Trim with Glue Dots.
7. Adhere the Pretty Peacock layer with Dimensionals.
8. Adhere the bunny oval with Dimensionals.
9. Tie with Pretty Peacock Scalloped Linen Ribbon. Tip: Twist the ribbon as you tie it so
that the “pretty” side shows on both tails.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 11 of 29
Directions Tag 3:
1. Punch the top of your Merry Merlot tag strip with the Delightful Tag Topper Punch.
2. Adhere the strip of Come to Gather designer paper with Multipurpose Glue.
3. Cut a piece of Whisper White with a Stitched Shapes oval.
4. Stamp the fox from Nature’s Beauty in Cajun Craze on the oval.
5. Stamp the brush in Crushed Curry on either side of the fox.
6. With your Aqua Painter, brush in Seaside Spray for the sky and Crumb cake for the
ground. Avoid brushing the stamped images.
7. Adhere the oval with Dimensionals.
8. Tie the top with Braided Linen Trim.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 12 of 29
Directions Tag 4:
1. Punch the top of your Very Vanilla tag strip with the Delightful Tag Topper Punch.
2. Ink the dots from Nature’s Beauty in Versamark and stamp 3 or 4 sets. Heat emboss
with Clear powder.
3. Using a Stampin’ Sponge, blend on a Night of Navy background. Once through blending
take a paper towel and wipe over the dots to remove the ink.
4. Stamp the deer from Nature’s Beauty in Soft Suede on a scrap of Whisper White. Cut
him out with your Paper Snips.
5. Stamp the sentiment from Itty Bitty Christmas in Night of Navy on Whisper White. Cut it
out with your 1” Circle Punch.
6. Adhere the deer with Dimensionals.
7. Adhere the sentiment with Dimensionals.
8. Add Fine Tip Glue below the deer’s hooves and in an arc by the blended background
(but not over any ink). Sprinkle with Ice Stampin’ Glitter and let dry before shaking off
the excess.
9. Tie the top with Seaside Spray Metallic Ribbon to finish.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 13 of 29
Wrapped in Plaid Itty Bitty Christmas Tags
Supplies:
Stamp Set (or bundle): Itty Bitty Christmas Bundle
Ink/Coloring Tools: Staz On Ink
Paper: Crumb Cake, Shimmery White, Wrapped in Plaid 6x6” Designer Series Paper
Embellishments: Shaded Spruce/Gold ⅜” (1cm) Striped Ribbon, Linen Thread, Whisper White Baker’s Twine
Tools: Scalloped Tag Topper Punch
Adhesives: Liquid Multipurpose Glue
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 14 of 29
Measurements Imperial ★ Crumb Cake
○ All Tags: 2” x 4-¼”
★ Shimmery White ○ 4-¼” x 5-½”
★ Wrapped in Plaid 6” x 6” Designer Series Paper
★ Shaded Spruce/Gold Striped Ribbon ○ All Tags: 8”
Measurements Metric ★ Crumb Cake
○ All Tags: 5cm x 10.5cm
★ Shimmery White ○ 10.5cm x 14.8cm
★ Wrapped in Plaid 6” x 6” Designer Series Paper
★ Shaded Spruce/Gold Striped Ribbon ○ All Tags: 20cm
Directions:
1. Cut down the Crumb Cake cardstock to create 4 tags, as per measurements.
2. Punch the 4 tags using the Scalloped Tag Topper Punch.
3. Cut the Wrapped in Plaid DSP for the addition to the bottom of the tags. I trimmed from
the Gold Foil line in each of the colour ways, and adhered to the bottom of the tag.
Die cut the 2 x snowflake & 1 x floral images, plus the 3 individual snow flakes, using
Shimmery White cardstock.
Stamp the sentiments onto the tags using Jet Black Stāzon Ink Pad.
Apply the die cut images to fit around the stamped sentiments, and adhere into place
using Liquid Multipurpose Glue.
Thread the Shaded Spruce/Gold Striped Ribbon through the tags; wrapping some
Linen Thread and/or Whisper White Baker’s Twine to finish.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 15 of 29
Season’s Greetings Wine Tags
Supplies:
Stamp Set (or bundle): Tags Tags Tags Bundle
Ink/Coloring Tools: Old Olive, Versamark
Paper: Cherry Cobbler, Crumb Cake, Night of Navy, Soft Suede, Very Vanilla, Night Before Christmas 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper, Gold Foil
Embellishments: Stampin’ Emboss Gold Powder, Cherry Cobbler ⅜” Diagonal Stripe Ribbon, Linen Thread
Tools: Die Cutting Machine, 1 ¾” Circle Punch
Adhesives: Liquid Multipurpose Glue, Stampin’ Dimensionals
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 16 of 29
Measurements Imperial ★ Soft Suede, Night of Navy
○ All Tags: 2 ¾”x 8-½”, score at 2 3⁄4”
★ Cherry Cobbler, Crumb Cake ○ Layer 1: 2 ½” x 5 ½”
★ Night Before Christmas DSP 6x6” Designer Series Paper ○ 2 ¼” x 5 ¼” ○ 2 ¼” x ¾” (Gold Foil Mat 2 ¼” x 1”)
★ Cherry Cobbler Diagonal Striped Ribbon, Linen Thread ○ Cherry Cobbler: 6” ○ Linen Thread: 16” (Doubled)
Measurements Metric ★ Soft Suede, Night of Navy
○ All Tags: 10.5cm x 6.25cm, score at 6.25cm
★ Cherry Cobbler, Crumb Cake All Tags: 10.25cm x 5.5cm
★ Wrapped in Plaid 6x6” Designer Series Paper ○ 10cm x 5cm ○ 1.5cm x 5cm
★ Cherry Cobbler Diagonal Striped Ribbon, Linen Thread ○ Cherry Cobbler All Tags: 20cm ○ Linen Thread All Tags 40cm
Directions:
1. Cut cardstock base and score.
2. Punch short side of scored cardstock with 1 ¾” Circle Punch so that the tag can hang on
beverage bottle.
3. Adhere DSP to layer of cardstock mat
4. Adhere small strip to Gold Foil Mat and adhere to above
5. Stamp sentiment in either Old Olive or Versamark (For Heat Embossing) on Very Vanilla
6. Die cut tag with coordinating dies
7. Loop Diagonal Striped Ribbon through sentiment tag and tie Linen Thread around in a
bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 17 of 29
Night Before Christmas Gift Tags
Supplies:
Stamp Set (or bundle): Tags, Tags, Tags Bundle
Ink/Coloring Tools: Crumb Cake, Stampin’ Write Markers in Old Olive, Cherry Cobbler and Crumb Cake
Paper: Cherry Cobbler, Very Vanilla, Night Before Christmas 6" X 6" (15.2 X 15.2 Cm) Designer Series Paper, Gold Foil
Embellishments: Cherry Cobbler Diagonal Striped Ribbon, Old Olive/Pretty Peacock Reversible Ribbon, Linen Thread
Tools: Delightful Tag Topper Punch, Die Cutting Machine
Adhesives: Stampin’ Dimensionals, Snail
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 18 of 29
Measurements Imperial ★ Night Before Christmas DSP
○ All Tags: 3” x 2”
★ Gold Foil ○ ¾” x 2”
★ Cherry Cobbler or DSP Strip ○ ¾” x 2”
★ Very Vanilla ○ Enough for stamped sentiments
★ Cherry Cobbler Diagonal Striped Ribbon, Pretty Peacock/Old Olive, Linen Thread
Measurements Metric ★ Night Before Christmas
○ All Tags: 7cm x 4.25cm
★ Gold Foil ○ 1.5cm x 4.25cm
★ Cherry Cobbler or Designer Series Paper ○ 1.5cm x 4.25cm
★ Very Vanilla ○ Enough for stamped sentiment
★ Cherry Cobbler Diagonal Striped Ribbon, Pretty Peacock/Old Olive, Linen Thread
Directions:
1. Cut Designer Paper Strips
2. Punch with Delightful Tag Topper
3. Add small strips of coordinating cardstock or Designer Paper
4. Stamp and Die Cut sentiment in coordinating color (Crumb Cake)
5. Adhere with Stampin’ Dimensionals
6. Add Ribbons
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 19 of 29
Hoot Hoot Hooray Gift Tags
Supplies:
Stamp Set : Hoot, Hoot, Hooray
Ink/Coloring Tools: Memento Black Ink Pad. Stampin’ Blends - Rococo Rose Duo, Calypso Coral Duo, So Saffron Duo, Old Olive Duo, Seaside Spray Duo, Highland Heather Duo, Crumb Cake Duo, Ivory
Paper: Thick Whisper White, 2019-2021 In Color 6”x 6” Designer Series Paper, Neutrals 6” x 6” Designer Series Paper
Embellishments: Linen Thread
Tools: Scalloped Tag Topper Punch
Adhesives: Multi Purpose Glue, Mini Dimensionals
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 20 of 29
Measurements ★ Thick Whisper White
○ Tag Bases: 4 - 4 ½” x 2”, Approximately 4 ¼” x 5 ½” “scrap”
★ Rococo Rose Gingham Designer Series Paper ○ Tag 2 - ¾” x 2” ○ Tag 4 - 2” x 2”
★ Seaside Spray Gingham Designer Series Paper ○ Tag 1: ½” x 2” ○ Tag 3: 2 ¼” x 2” ○ Tag 4: 2” x 2”
★ Crumb Cake Gingham Designer Series Paper ○ Tag 4: 2” x 2”
★ Linen Thread ○ 8 @ 16” each
Tag 1- Welcome Little One:
1. Insert Whisper White Strip in to Scalloped Tag Topper Punch and punch tag.
2. Stamp image in Memento Ink on tag.
3. Color in bear and rocking horse with Seaside Spray, Crumb Cake and Ivory
Blends.
4. Adhere strip of Seaside Spray gingham paper to bottom of tag.
5. Fold one piece of Linen Thread in half, tie ends in to a knot. Thread through the
tag hole, and loop it through.
6. Fold the other piece in half, thread through tag hole and tie into bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 21 of 29
Tag 2- For You Flowers:
1. Insert Whisper White Strip in to Scalloped Tag Topper Punch and punch tag.
2. Stamp images in Memento Ink on tag. An easy way to ink only the image is to place
clear tape over the area you do not want inked, ink the stamp, then pull away the tape.
3. Color images in with Rococo Rose, Calypso Coral, So Saffron, Old Olive and Crumb
Cake Blends.
4. Adhere Rococo Rose Gingham strip on to tag.
5. Ink sentiment and stamp on to scrap of Thick Whisper White card stock. Cut out and
adhere to Rococo Rose Gingham layer.
6. Fold one piece of Linen Thread in half, tie ends in to a knot. Thread through the tag hole,
and loop it through.
7. Fold the other piece in half, thread through tag hole and tie into bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 22 of 29
Tag 3 - Happy Birthday:
1. Insert Whisper White Strip in to Scalloped Tag Topper Punch and punch tag.
2. Adhere Seaside Spray Gingham Designer Series Paper to tag.
3. Stamp image 2 times on to scrap of Thick Whisper White cardstock. Color one image
completely using all Blends listed above. Color second image banner.
4. Cut out fully colored image completely, and cut out colored banner from second one.
5. Adhere full image to tag. Adhere second banner to tag on top of the first one using mini
dimensionals.
6. Fold one piece of Linen Thread in half, tie ends in to a knot. Thread through the tag hole,
and loop it through.
7. Fold the other piece in half, thread through tag hole and tie into bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 23 of 29
Tag 4 - Hoot, Hoot, Hooray:
1. Insert Whisper White Strip in to Scalloped Tag Topper Punch and punch tag.
2. Stamp image on to tag.
3. Stamp Image on to Rococo Rose, Seaside Spray, and Crumb Cake Gingham Designer
Series Papers. Color beaks with Calypso Coral Blends. Cut out.
4. Stamp eye area of owls 3 times on to scrap of thick Whisper White cardstock. Cut out
and adhere to gingham owls.
5. Adhere owls to tag.
6. Fold one piece of Linen Thread in half, tie ends in to a knot. Thread through the tag hole,
and loop it through.
7. Fold the other piece in half, thread through tag hole and tie into bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 24 of 29
Bird Ballard Thank You Bag Tag!
Supplies:
Stamp Set (or bundle): Itty Bitty Birthdays
Ink/Coloring Tools: Versamark Ink Pad, pool Party
Paper: Whisper White, Basic Black, Bird Ballard Designer Series paper
Embellishments: Basic Jewels Rhinestones, Linen Thread, White Embossing Powder
Tools: Starburst Punch, Sponge Roller, Heat Tool
Adhesives: Tombow, Dimensionals
Measurements ★ Thick Whisper White
○ Scrap for punching
★ Basic Black scrap for embossing
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 25 of 29
Directions:
1. Punch a circle using the Starburst Punch, and then give a light colour pf Poll Prty using
the sponge roller. Just a light dusting mind, so it gives the feel of the sky and white
clouds.
2. Fussy cut your desired Flowers and Bird from the Bird Ballard DSP and adhere using
Tombow Glue,
3. Using a dimensional add your Bird.
4. Stamp your sentiment using versamark, and use the White embossing Powder and Heat
Tool to set it, I fussy cut around the sentiment but you can just use as a strip and attach
flat using the wet glue.
5. Make a small hole at the top of the punched circle and add Linen Thread to hang on the
Bag Handle and then add a small piece around the thread and tie in a small bow.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 26 of 29
Sail Away Birthday Tag
Supplies:
Stamp Set (or bundle): Sailing Home Bundle, Itty Bitty Birthdays
Ink/Coloring Tools: Night of Navy, Soft Suede
Paper: Come Sail Away Designer Paper, Whisper White, Crumb Cake, Soft Suede.
Embellishments: Sail Away Trinkets, Linen Thread
Tools: Starburst Punch, Die Cutting Machine
Adhesives: Multipurpose Liquid Glue, Dimensionals
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 27 of 29
Measurements ★ Thick Whisper White
○ Scraps
★ Soft Suede Scraps
★ Crumb Cake Scraps
Directions:
1. Cut a piece of Strip paper from the Come Sail Away Papers, measuring 3 inches by 2
inches, find the middle at the bottom and cut at an angle to make a flag.
2. Stamp your image from the Stamp Set, in this case a Lighthouse, in Soft Suede and cut
using the coordinating Dies.
3. Cut the wheel from Soft Suede Card Stock and the rope length from crumb Cake Card
Stock.
4. Adhere the DSP to the Punched Circle, glue down the rope length, add dimensionals to
the back of Lighthouse and add some Line Thread in a figure of 8, and then adhere to
the DSP.
5. Thread some Linen Thread through the Trinket and to the Wheel die cut, add some
small dimensionals to the back and adhere to your tag.
6. Stamp Happy Birthday in Night of Navy and trim and then add using wet glue to the
middle and dimensionals to either end and adhere on top of the LIghthouse.
7. Make a small hole to the top of the tag, thread through some Linen Thread and tie to the
paper bag.
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 28 of 29
Hello/Set Sail
Supplies:
Stamp Set (or bundle): Free As A Bird, Sailing Home Bundle
Ink/Coloring Tools: Memento Ink, Soft Suede, Night of Navy
Paper: Come Sail Away Designer Paper, Whisper White, Crumb Cake, Soft Suede, Bird Ballard Designer Paper
Embellishments: Basic Jewels, Linen Thread
Adhesives: Multipurpose Liquid Glue, Dimensionals
Measurements ★ Thick Whisper White
○ Cut two strips of 2”x 8-¼’
★ DSP Cut two strips one of each design ½” x 2”
All About Tags
Stampin Glam Squad September 2019 Tutorial Bundle
Page 29 of 29
Directions:
1. Score each strip of Whisper White so that they fold in half, 4-¼”, when folded punch a
small hole and thread your Linen Thread through.
2. Fussy cut a Bird image from the Bird Ballard paper and adhere to one of the tags using
dimensionals.
3. Add one strip of the DSP cut, in this case the dotty design and glue flat to bottom of the
tag.
4. Stamp Hello sentiment form the Free as a Bird Stamp Set, and finish with 3 jewels.
5. On the second tag Stamp the Lighthouse in Soft Suede, and then ink up the flock of
birds and stamp off before stamping on to the tag, this is called second generation
stamping, it gives a lighter colour effect.
6. Adhere the stripy strip of DSP to the bottom of the tag.
7. Die cut the wheel and the rope length and glue these flat onto the tag
8. Stamp your chosen sentiment form the Sail Away Bundle in Night of Navy and finish with
Jewels.
Quick Note
I would love you to share your completed projects with your friends and for you to tell them about the
Stampin Glam Squad Tutorial Bundle.
But please kindly keep the tutorial bundle for personal use.
These tutorials should not be shared, resold or reproduced in any way.
I am grateful for your support and appreciate your respect of the time and creativity needed to produce a
quality product for you to create with.
top related