procedures in planning and conducting maintenance

Procedures in Planning and Conducting Maintenance

At the end of the discussion, you must be

able to:• Identify the different maintenance procedures in taking

care of computers;

• Differentiate preventive maintenance and corrective

maintenance;

• Differentiate ideal computer laboratory atmosphere

Maintenance• The act or activity of keeping something in an

existing and usually satisfactory condition

Two Types of Maintenance• Preventive Maintenance• Corrective Maintenance

Two Types of Maintenance• Preventive Maintenance

- is given for maintaining equipment and facilities in satisfactory operating condition to extend the life of the component.- Two types of Preventive Maintenance

1. Planned Maintenance2. Conditioned-Based Maintenance

Two Types of Maintenance• Preventive Maintenance

- is given for maintaining equipment and facilities in satisfactory operating condition to extend the life of the component.- Two types of Preventive Maintenance

1. Planned Maintenance2. Condition Based Maintenance

Two Types of Preventive Maintenance

• Planned Maintenance (PM)- is any variety of scheduled maintenance to an object or an item of equipment.

• Condition Based Maintenance (CBM)- is maintenance strategy that uses the actual condition of the asset to decide what maintenance needs to be done.

Two Types of Maintenance• Corrective Maintenance

- is task performed to identify, isolate, and rectify a fault so that the failed equipment or system can be restored to an operational conditions within the tolerances or limits.

Learning Task – Analysis

Picture 1 Picture 2

Learning Task – Analysis

Picture 1 Picture 2

Learning Task – Analysis

Picture 1 Picture 2

Learning Task - Application

• Group yourselves into 3 groups. • Then make 5 sentences, what are the

most important things to consider to have an ideal computer laboratory?

Assessment - Identify the following sentences. Write your answers in a ¼ sheet of paper.

_______ 1. Maintenance of systems BEFORE fault occurs._______ 2. It is the act or activity of keeping something in

an existing and usually satisfactory condition._______ 3. It is a task performed to identify, isolate and

rectify a fault.

Assessment - Identify the following sentences. Write your answers in a ¼ sheet of paper.

_______ 4. It is to ensure that an item of equipment is operating correctly to avoid any unscheduled breakdown and downtime of an equipment.

_______ 5. It dictates that maintenance should only be performed when certain indicators show decreasing performance.

Answers key:

1. Preventive Maintenance2. Maintenance3. Corrective Maintenance4. Planned Maintenance5. Condition-Based Maintenance

Assignment

Write a reaction paper regarding the video presentation shown earlier.