procedures in planning and conducting maintenance
TRANSCRIPT
Procedures in Planning and Conducting Maintenance
At the end of the discussion, you must be
able to:• Identify the different maintenance procedures in taking
care of computers;
• Differentiate preventive maintenance and corrective
maintenance;
• Differentiate ideal computer laboratory atmosphere
Maintenance• The act or activity of keeping something in an
existing and usually satisfactory condition
Two Types of Maintenance• Preventive Maintenance• Corrective Maintenance
Two Types of Maintenance• Preventive Maintenance
- is given for maintaining equipment and facilities in satisfactory operating condition to extend the life of the component.- Two types of Preventive Maintenance
1. Planned Maintenance2. Conditioned-Based Maintenance
Two Types of Maintenance• Preventive Maintenance
- is given for maintaining equipment and facilities in satisfactory operating condition to extend the life of the component.- Two types of Preventive Maintenance
1. Planned Maintenance2. Condition Based Maintenance
Two Types of Preventive Maintenance
• Planned Maintenance (PM)- is any variety of scheduled maintenance to an object or an item of equipment.
• Condition Based Maintenance (CBM)- is maintenance strategy that uses the actual condition of the asset to decide what maintenance needs to be done.
Two Types of Maintenance• Corrective Maintenance
- is task performed to identify, isolate, and rectify a fault so that the failed equipment or system can be restored to an operational conditions within the tolerances or limits.
Learning Task – Analysis
Picture 1 Picture 2
Learning Task – Analysis
Picture 1 Picture 2
Learning Task – Analysis
Picture 1 Picture 2
Learning Task - Application
• Group yourselves into 3 groups. • Then make 5 sentences, what are the
most important things to consider to have an ideal computer laboratory?
Assessment - Identify the following sentences. Write your answers in a ¼ sheet of paper.
_______ 1. Maintenance of systems BEFORE fault occurs._______ 2. It is the act or activity of keeping something in
an existing and usually satisfactory condition._______ 3. It is a task performed to identify, isolate and
rectify a fault.
Assessment - Identify the following sentences. Write your answers in a ¼ sheet of paper.
_______ 4. It is to ensure that an item of equipment is operating correctly to avoid any unscheduled breakdown and downtime of an equipment.
_______ 5. It dictates that maintenance should only be performed when certain indicators show decreasing performance.
Answers key:
1. Preventive Maintenance2. Maintenance3. Corrective Maintenance4. Planned Maintenance5. Condition-Based Maintenance
Assignment
Write a reaction paper regarding the video presentation shown earlier.