printer network process in ies
Post on 04-Apr-2018
242 Views
Preview:
TRANSCRIPT
-
7/31/2019 Printer Network Process in IES
1/30
PRINTER NETWORK PROCESS INIES
-
7/31/2019 Printer Network Process in IES
2/30
Create Network Printer
Check for the incoming SV request
Raise the CPR
Forward the request to the EDS
Printing team.
Complete the transport.
Check for the roles with the
security team.
Notify the requestor.
-
7/31/2019 Printer Network Process in IES
3/30
-
7/31/2019 Printer Network Process in IES
4/30
Request raised by the user and it has
arrived in inbox (SO01)
-
7/31/2019 Printer Network Process in IES
5/30
Logon to DT1/300 run the transaction SPAD
-
7/31/2019 Printer Network Process in IES
6/30
Create CPR through the notification
-
7/31/2019 Printer Network Process in IES
7/30
Run the transaction ZCPR, edit the CPR
-
7/31/2019 Printer Network Process in IES
8/30
Update the long text
-
7/31/2019 Printer Network Process in IES
9/30
When the CPR is save then the status
will be O.
Mail the CCOE team to change the status
from OOA and OAA. AI is changed by 1.5Monitoring team.
Once the CPR is in I then mail to EDS
Printing team to configure the printer.
-
7/31/2019 Printer Network Process in IES
10/30
Service Request Form
-
7/31/2019 Printer Network Process in IES
11/30
-
7/31/2019 Printer Network Process in IES
12/30
The printing team will create a ticketin the OVSD.
Now wait until the ticket is processed
and you get a mail into EMEA mailbox
with the info about it.
Then open the CPR again for editing and
click the Create Transport button on
the bottom left, which became nowavailable.
-
7/31/2019 Printer Network Process in IES
13/30
-
7/31/2019 Printer Network Process in IES
14/30
Choose the system from which the transport
will be
-
7/31/2019 Printer Network Process in IES
15/30
-
7/31/2019 Printer Network Process in IES
16/30
Now go to the
development system
where the printer
should be created
(by the Printing
team) and look for
it via transactionSPAD.
In SPAD enter the
printer name anddisplay it. (hit
enter, or display
button)
-
7/31/2019 Printer Network Process in IES
17/30
Before adding the printer to the CPR/CTF you can
check within the CPR if the transport has already
some data or not (in this stage as we have not
added there anything, it should not).
Go to the CPR, go above the CTF number and double
-
7/31/2019 Printer Network Process in IES
18/30
-
7/31/2019 Printer Network Process in IES
19/30
Go back to the DEV system and add a printer to my
transport
and hit the truck icon on the screen:
-
7/31/2019 Printer Network Process in IES
20/30
-
7/31/2019 Printer Network Process in IES
21/30
Now I just hit the save
button and press greenarrow to go away from thatprinter maintenance.
And we are finished in theDevelopment system.
Now we can check that wereally have the printerassigned to the request.
So I go back to the CPR andcheck it again as I did before(through the CTF and look
into it).
Now you can see that myCTF has already a printerdefinition within it and itsthe only object there.
If you had more printers tocreate ou can add them all
-
7/31/2019 Printer Network Process in IES
22/30
Go to your CPR. Double click on the CTF you want to
release and then in the top left corner hit the ReleaseTransport button:
-
7/31/2019 Printer Network Process in IES
23/30
-
7/31/2019 Printer Network Process in IES
24/30
-
7/31/2019 Printer Network Process in IES
25/30
-
7/31/2019 Printer Network Process in IES
26/30
-
7/31/2019 Printer Network Process in IES
27/30
Now the CPR is in OU status, Mail CCOE team to changethe CPR to OP and AUT.
1.5 Monitoring group will transport and change the status toRP.
Meanwhile, you can check the role for the printer with thesecurity team.
Check for the printer exists in PC1 or not.
Now mail the user to check whether the printer works fine atthere end.
Once the user sends the confirmation then take steps tochange the status to C.
As all the steps are performed close the notification.
-
7/31/2019 Printer Network Process in IES
28/30
Change Network Printer
Check for the incoming SV request
Raise the CPR
Forward the request to the EDSPrinting team.
Notify the requestor.
-
7/31/2019 Printer Network Process in IES
29/30
Delete Network Printer
Check for the incoming SV request
Raise the CPR
Forward the request to the EDSPrinting team.
Complete the transport.
Remove the roles with the help of
security team.
Notify the requestor.
-
7/31/2019 Printer Network Process in IES
30/30
Thank you
top related