presentation on mango cutter

Design and Fabrication of Mango Cutter Mechanism

TITLE OF PROJECT:

LTJSS

PRIYADARSHINI POLYTECHNIC NAGPUR

PROJECTEES : 1) PIYUSH. N .SONI

2) PAVAN. D. YEOLE

3) VISHAL. P. SAMUNDRE

GUIDED BY : MR. F.S.HUSSAIN

( LECT.IN. M.E. DEPT )

INTRODUCTION

• USUALLY FARMERS ARE USING CUTTER OR KNIFE WHICH IS ATTATCHED TO A BAMBOO OR A ROD FOR CUTTING MANGOES.

• NOW WE ARE IMPLEMENTING A MECHANISM KNOWN AS “DESIGN AND FABRICATION OF MANGO CUTTER MECHANISM”.

• THE MAIN AIM TO IMPLEMENT OR WORK ON THIS PROJECT IS TO REDUCE THE PROBLEM RELATED TO CUTTING THE MANGO STEM WHICH OCCURRED BY MANNUAL METHOD.

• ALSO THERE ARE VARIOUS REASONS WHICH ARE BEING EXPLAINED TO YOU ON THE FURTHER NOTE.

• IT IS TOTALLY A NEW CONCEPT WHICH WILL HELP FARMERS IN CUTTING THE MANGO AND REDUCING THEIR EXTRA EFFORT.

INTRODUCTION

Construction and Drawing:

handle

Bearings (6205zz)

Pvc wheels

Laminated practical board container

angle rod Frame – 25 by 25 by 3

Pipe having, od-42mm and id-38mm Jute carrier

Scissor like cutter

Joint between the two pipes

Lever to operate cutter

(Main pipe)

Detachable pipe

DIFFERENT COMPONENTS OF MANGO CUTTER

1) CUTTER: SHARP EDGES

DIRECTION OF OPERATION OF CUTTER

RETRACTING SPRING

SCISSOR LIKE CUTTER

PREVENTOR

18 m

m

3 mm

• When the mango is cut from the tree, it falls on the funnel.

Working :

• It consists of a lever through which the scissor like cutter operates.

• When the lever is pressed, the cutter gets engages and the mango is cut through it.• when the lever is released the cutter gets disengages and then the cutter comes to its original position.

• funnel passes it towards the jute duct.

• Jute duct safely passes the fruit to the container.

•This is how the mango cutter works.

• Advantages:

• It is easy to operate and simple in construction.

• It prevents the fruits from damage.

• Its operation is time saving.

• Easy to move.

• Any shape of mango can be withdrawn from the funnel.

• It can work in any condition.

• Unskilled labour can also easily operate this mechanism.

• Low maintenance cost.

• Limitations:

• Large size of fruits like papaya, pineapple, etc cannot be cut from this mechanism.

• Space required is more.

• APPLICATIONS :

• It can be used for cutting the small branches of tree.

• The main application of this cutter is to cut the fruits like mangoes, orange, guava, apples.

Sr.NoSr.No Name of componentsName of components Cost Cost

01)01) P.V.C wheels P.V.C wheels 200 /-200 /-

02)02) FrameFrame 600 /-600 /-

03)03) M.S. PipeM.S. Pipe 500/-500/-

04)04) CutterCutter 200 /-200 /-

05)05) othersothers 1000 /-1000 /-

OVERALL COST

TOTAL 2500 /-

• FUTURE MODIFICATIONS:

• Sensor for counting the mangoes .

• switch can be provided in the place of lever .

• We can use the hydraulic system for the operation of cutter.

• We can use a motor to move the mechanism.

• This will also help them in reducing the damages of fruits.

• This mechanism will be useful for our farmers, who do extra efforts in cutting fruits from the trees.

CONCLUSION

References

3. Machine Design by S.B.Patil

1. Design Data Book by B.D.Shiwalkar

5. Machine Design by Khurmi Gupta

2. P.S.G.Data Book

4. Machine Design by V.S.Bhandari