oil sample tap kit - sunbelt transformer · for a quick quote on your next project, contact us at:...

OIL SAMPLE TAP KIT INSTALLATION GUIDE

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

INSTALLATION INSTRUCTIONSFOR THE ARC FLASH OIL SAMPLE DEVICE ASSEMBLY ON A PAD MOUNT TRANSFORMER*Suggested location of Sample Tap Kit may change due to location of conduit stubs.

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

PARTS LISTITEM # DESCRIPTION QTY

A Black Nipple 1

B NPT Black Tee 1

C Female Black Bushing 1

D Zinc Plated Elbow 1

E 1/4” Nipple, 1/4” NTP Male End 1

F USS Flat Washer Plated 5

G Serrated Flange Nut 5

H 1/4” Nipple, 7/16” -20 NTP Female End 1

J Cable Tie Mount Base 5

K Cable Tie 5

L Stainless Hose Clamp 2

M Stainless Braided Hose 1

N Black Hose 1

P Gasket 1

Q Hole Layout Template Sticker 1

X Unit Sticker 1

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

PARTS LIST CONTINUED

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 2:

Remove the Pressure Gauge from Unit.

Install Part #A.

STEP 1:

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 3:

STEP 4: Install Part #E.

Install Part #B.

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 5:

STEP 6:

Reinstall Pressure Gauge.

Place Part #Q on the Cabinet Side.

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 7:

STEP 8:

Drill Out Holes to the Size Marked on Template.

Insert Part #P on the Back Side of the Device. Insert Device into the Drilled Holes.

*Confirm the ball valve is closed in the main housing of the arc flash oil sample kit.

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 9:

STEP 10: Install Part #C & Part #D Into the 1” Drain Valve.

Bolt on the Arc Flash Oil Sample Device AssemblyUsing Part #F & Part #G.

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 11:

STEP 12: Install Part #J Even Spaced on the Tank Wall.

Install Part #H on the Back of the Arc FlashOil Sample Device Assembly.

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 13: Install Part #N onto Part #E Behind the Pressure Gauge & Install Part #N onto Part #H that is Attached to the Arc Flash Sample Oil Device Assembly.Install Part #L to Each End of Part #N.

POWERING YOUR SUCCESS

PATENT #9116081ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 14: Install Part #M on Part #H that is Attached to theDevice & Install Part #M onto Part #D on the Drain Valve.Install Part #K Around Part #N & Through Part #J.Turn the Drain Valve on After Stainless Braided Hose(Part #M) is Connected and Apply 1 psi of Nitrogen to the Unit to Complete the Install.

DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

PATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLYPATENT #9116081 ARC FLASH OIL SAMPLE DEVICE ASSEMBLY

STEP 15: Fill Out the Following Information on Part #X.Install Part #X as Shown on the Detail Layout.

For a quick quote on your next project, contact us at: DOMESTIC 800.433.3128 INTERNATIONAL 305.517.3657 SUNBELTUSA.COM

OIL SAMPLE TAP KIT INSTALLATION GUIDE | 2019