nutek & boston retail (2)

TO MEET ALL YOUR NEEDS

FOR FURTHER INFORMATIONGO TO

www.nuteklimited.co.uk

WORKING TOGETHER

WORKING TOGETHER

• Our global HQ: Boston, Mass, USA• 120,000sft• Design, Engineering, metal work.

• Boston USA: Design, Metal Work, Wiring• Youngstown Ohio: Design, Extrusions• Rotterdam: Warehouse, minor final assembly

• Portugal: Extrusions• Holland: Injection moldings• Germany: Joinery • China: Metalwork sub components

Stock Levels Approx £250k

•14000 sft Manufacturing space

• Design, Engineering, metal work.

In house facilities include:

Tube bending, ring rolling and curving, CNC punching and bending, Tig and Mig welding

Polishing

• Grade 304 Stainless Steel as Standard

• Grade 316 For Coastal Regions

• Stainless steel to be Satin polish 240 grit finish

• Width 1200mm,1580mm, 2000mm

• Height 800mm, Below ground 300mm, overall 1100mm

• Wall thickness 2mm (2.6mm)

• Tube diameter 50mm (60.3mm)

• Important note: The radius of the loops are set to a standard for safety, eliminating personal injury.

• (Standards sizes and Nutek`s)

Section 1

• Grade 304 Stainless Steel as Standard

• Grade 316 For Coastal Regions

• Stainless steel to be Satin polish 240 grit finish

• Width 1200mm,1580mm, 2000mm

• Height 800mm, Below ground 300mm, overall 1100mm

• Wall thickness 2mm (2.6mm)

• Tube diameter 50mm (60.3mm)

• Important note: The radius of the loops are set to a standard for safety, eliminating personal injury.

• (Standards sizes and Nutek`s)

• Loop fitted with New Bump Rail saving significant costs, eliminating damage to Shopping Trolleys.

Section 1 Cont…

• Grade 304 Stainless Steel, Grade 316 for Exterior use in Coastal Regions

• Stainless Satin Polish 240 grit finish

• 38mm minimum tube in 2 halves

• No protruding brackets above or below protection rail

• Note the round tube for health and safety eliminating serious head injuries ( i.e. cuts and abrasions)

Section 2 COLUMN PROTECTION

• Height 1400mm minimum, 400mm below ground

• Diameter 114mm

• Reflective Strip, 100mm from top

•Anchor straps fitted

Section 4

• Designed to withstand impact from vehicles

• To protect plant materials, roller shutter doors, vulnerable corners of buildings.

• Galvanised Steel prevents from rusting

• Surface mounted Bollard 1500mm High, 219mm diameter & 9.5mm wall thickness

• Fixed using 4 x M16 x 150 Studs and chemical resin anchors

• Dot.Com Protection Bollards

Section 5/6

Section 9

• External & Internal Kee Klamp

• To Protect Plant, Material in back of house areas and external yards. Can also be used as handrail for slopes and change in floor levels.

Section 10

Section 10

External protection RailSection 10

•Stainless Steel Low Level Protection

• 2” (50mm) Diameter

• Potted or Surface Mounted

• Canopy

• Post Protection

• Low level Wall protection

• Trolley Loops

• All Designed, Manufactured,

Supplied and Installed by Nutek Limited.

• Meeting all Design Standards.

• 100% PVC free• Base trim and vertical

corner guards• Rigid or flexible

WORKING TOGETHER

Section 12

COLUMN PROTECTION

• Grade 304 Stainless Steel, Grade 316 for Coastal Region Exterior Use

• Stainless Steel, Satin Polish 240 grit finish

• 38mm tube in 2 halves with 2 fixing points.

• Installed @ 750mm FFL to top of tube.

• Note the radius of the fixing plates, Manufactured by Nutek in the U.K

Section 14

NEW Products

• Half round corner guard

• Stainless steel, brushed.

• 100% recyclable• Does not wear or age • Lower carbon

footprint than metal and injection molded versions

WORKING TOGETHER

Section 16

WORKING TOGETHER

Section 17

Series 2000

WORKING TOGETHER

Section 18

Series 3300

Series 2000

WORKING TOGETHER

• Top illustration showing the core…

• The core is made completely from recycled material.

Easy as 1-2-3 1. Attach the base and end/corner cap to the desired surface by inserting #8 panhead screws through the pre-slotted holes in both the end cap and the base. Insert screws through the two holes of end cap and tighten.2a. Flexible Top: Butt end of the vinyl top against end/corner cap face. While applying pressure, bend back (banana peel) vinyl top so that vinyl legs are positioned within the base grooves. Roll vinyl top over full length of base, then tap with rubber mallet to ensure vinyl is securely locked into the base.

2b. Rigid Top: Snap the Rigid Top over the Rigid Base.3. If necessary wipe clean with any household cleaning product.

WORKING TOGETHER

WAREHOUSE PROTECTION RAIL

Section 21

• Mild Steel

• Galvanised

• 60mm x 40mm

• Box Section

• Very Durable

Door & Corner Protection

• Installed on racking legs and internal doors in back of house, to protect from roll-cages and pallet trucks.

• 90 degree angle to cup doors for protection.

• Minimum 610 High.

• 6mm wall thickness.

• Surface Mounted 4 x M10 with Chemical Anchor.

• Available in Galvanised, Chrome and Stainless Steel

• NOTE: Chrome & Stainless are generally for front of house.

Section 23

Barrier RailSection 25

Barrier RailSection 25 cont…

Balustrade

1.5kN load rating for retail environment48.3mm Diameter Stainless Steel UprightsCast Stainless Steel Footplates with cover plates42.4mm Diameter Stainless Steel Handrail at 10mm Thick• Above description is for rakes going upstairsClear Toughened Glass1100mm nominal height on level areas950mm nominal height on raked areasAll above are minimum specification

• The illustration is 48.3 Diameter

Section 26

Staircase Balustrade & Handrails

• 1.5kN load rating for retail environment

• 48.3mm Diameter Stainless Steel Uprights

• Cast Stainless Steel Footplates with cover plates

• 42.4mm Diameter Stainless Steel Handrail at 10mm Thick Clear Toughened Glass

•1100mm nominal height on level areas

• 900mm nominal height on raked areas

• All above are minimum specification

Section 27

1”

1.75”

2”

3”

3”

Series 1000

Series 1750

Series 2000

Series 3300

Series 3050

•• Eco Eco FlexFlex profiles from Boston Retail

• 85% + Recycled.• 100% Recycled base & 100% Recyclable.• UL-94 HB fire rating• RoHS compliant

• UNIQUE MARKET LEADER for Flexible

• Available with both plastic and Aluminium backing channel

WORKING TOGETHER

•• Eco RigidEco Rigid profiles from Boston Retail

• 100% PVC free range.• 100% Recyclable.• 100% Sustainable• UL-94 HB fire rating• RoHS compliant• Bisphenol-A free

• Less expensive than PVC, and Greengaurd

• Tested in accordance to ISO5893 dart test. Data available upon request. (Performs better than PVC traditional system)

• Available with both plastic and Aluminium backing channel

WORKING TOGETHER

Benefits• Award winner for

sustainable innovation; Green AppleGreen Apple

• Market leader in extrusions

• Product for every budget and application

• Best ROI in the business• Un-bias advice, as we

have all bases covered….not just one.