notes: 1. installation shall comply with all … · 2019. 7. 17. · forced air intake area heat...

90.0

FRONT VIEWCABINET DOORS AND INPUT/OUTPUT DEADFRONT

REMOVED FOR CLARITY

HEATSINKCABINET

CIRCUIT BREAKERCABINET

INPUT/OUTPUTCABINET

USER INTERFACECONNECTIONSEE DETAIL

S1 INPUT

S1 BYPASS

LOAD ALOAD B

S2 INPUT

S2 BYPASS

4X 3.5

4X 2.52 PLCS

4X 6.03 PLCS

14X 4.0 CONDUIT HOLES AND LOCATIONS FOR REF ONLY.

HOLES TO BE CREATED IN THE FIELD.

4.2

4X 5.02 PLCSFAN

TOP VIEWNON USEABLE AREA

2X 10.0 X 25.0CABLE ACCESS OPENING

FRONTCUSTOMERCOMMUNICATIONACCESS

REAR

9.4 X 24.4PERFORATED AREA

2X 7.0 X 9.4PERFORATED AREA

3X 26.03 PLCS

3X 4.02 PLCS

18X .56

6X 14.5

6X 28.8

4.2

4X 3.5

4X 6.03 PLCS

4X 2.52 PLCS

4X 5.02 PLCS

14X 4.0 CONDUIT HOLES AND LOCATIONS FOR REF ONLY. HOLES TO BE CREATED IN THE FIELD.

FRONT

REAR

BOTTOM VIEW

NON USEABLE AREA

CUSTOMERCOMMUNICATIONACCESS

2X 10.0 X 25.0CABLE ACCESS OPENING

42.0

90.0

36.0

OPERATIONAL AND SERVICE NEC REQUIRED ACCESS

PLAN VIEWACCESS REQUIREMENTS

SCALE 1:10

FRONT

FRONT

ISOMETRIC VIEW

HEAT SINK BAYFORCED AIR INTAKE

AREA

HEAT SINK BAYFORCED AIR OUTLET

AREA

TOUCHSCREENDISPLAY

CIRCUIT BREAKER BAYPASSIVE AIR OUTLETAREA

USERINPUTS

ETHERNET

ALARM RELAYS

REMOTEEPO

USER INTERFACE CONNECTION DETAILSCALE 1:4

MODBUS

USERINPUTS

NOTES:

1. INSTALLATION SHALL COMPLY WITH ALL APPLICABLE NATIONAL, STATE, AND LOCAL CODES.

2. REFER TO PRODUCT DOCUMENTATION FOR ADDITIONAL DETAILS PRIOR TO SITE PREPARATION OR INSTALLATION.

3. OPERATING TEMPERATURE RANGE: 0 TO 40 C.

4. SYSTEM COOLING REQUIREMENTS: FORCED AND EXHAUST AIR COOLED.

5. SYSTEM WEIGHT: HEAT SINK BAY 1515 LBS (689 kg)

CIRCUIT BREAKER BAY 2360 LBS (1073 kg)

INPUT/OUTPUT BAY 915 LBS (416 kg)

TOTAL 4790 LBS (2177 kg)

6. OPERATIONAL ACCESS VIA FRONT DOORS. MAINTENANCE AND CONNECTION ACCESS VIA FRONT DOORS AND REMOVEABLE SIDE OR REAR PANELS (DEPENDING ON ACCESS - SEE NOTE 7).

7. RECOMMENDED MINIMUM CLEARANCES: FRONT = 42" LEFT = 42" OPTIONAL RIGHT = 42" OPTIONAL TOP = 60"

8. SYSTEM MUST HAVE ALL PANELS AND DOORS INSTALLED FOR PROPER OPERATION.

9. FINISH: FRAME AND OUTER PANELS, POWDER COAT INTERIOR, GALVANIZED ZINC ELECTROPLATE.

10. CABLE ENTRY: TOP ENTRY - TOP EXIT BOTTOM ENTRY - BOTTOM EXIT TOP ENTRY - BOTTOM EXIT BOTTOM ENTRY - TOP EXIT

11. BUSBAR TERMINALS FURNISHED WITH NEMA 2-HOLE LANDINGS. SEE SHEET 2 DETAILS A, B, AND C.

12. 1600A DESIGNED FOR CABLE SIZES UP TO 6X 750 MCM PER PHASE.

A01 -- PLH UPDATING LABELS 4/25/2018A00 -- PLH INITIAL RELEASE 02/22/2018Rev. ECN# Resp. Description Date

Revision Table

DSheet Size

PD

Power Protection

OutlineScale

Document Kind Title

Document ID PageDivision/Dept.

Approved

Prepared

We reserve all rights in this docum

ent and in the information contained therein. R

eproduction, use or disclosure to third parties without express authority is strictly forbidden. ©

Copyright 2014 A

BB

.

PLHDWG: OUTLINE, 1600A SS4

1:16

94-9200-00000201 1 / 2

02/22/2018Date Drawn

UnitsInch

94-9200-00000201Item No.

Interpret drawing in accordance with ASME Y14.5-2009.

Doc. Rev.

A01

A01Item Rev.

N/AReference

X.XXX = ±.030

X.XX = None

Tolerance

Part must comply with company doc. 94-10-000001.

0

25.6 A OUTPUT

29.4 B OUTPUT

39.0 A S1 INPUT

42.8 B S1 INPUT

46.5 C S1 INPUT

50.3 A S2 INPUT

54.0 B S2 INPUT

57.8 C S2 INPUT

33.1 C OUTPUT

68.1 GROUND

REAR VIEWINPUT/OUTPUT BAY PANEL AND BUS BAR SUPPORTS

REMOVED FOR CLARITY

HEAT SINK BAYCIRCUIT BREAKER BAYINPUT/OUTPUT BAY

0

9.2

NE

UTR

AL

0

21.1NEUTRAL

A

B

C

RIGHT VIEWPANELS AND I/O BUS BAR SUPPORTS

REMOVED FOR CLARITYLEFT VIEW

PANEL REMOVED FOR CLARITY

44.6

16.8

FRONT VIEW HEAT SINK BAYCENTER OF GRAVITY LOCATION

44.5

16.5

FRONT VIEW CIRCUIT BREAKER BAYCENTER OF GRAVITY LOCATION

CENTEROF GRAVITY

45.3

15.2 FRONT VIEW INPUT/OUTPUT BAYCENTER OF GRAVITY LOCATION

CENTEROF GRAVITY

17.3 15.2 19.3

1.24 TYP 4.00

2X 1.24 TYP 2X 2.88 TYP

2X 2.57

DETAIL ANEUTRAL BUS BAR

SCALE 1:4

1/2 13-UNC NUT TYP

32X NEMA 2 HOLE CONNECTION

1.75 TYP 4.0

2X 1.00

2X 2.00 TYP

.531 TYP

DETAIL BCUSTOMER GROUND BUS BAR

SCALE 1:4

9X NEMA 2 HOLE2 SIDED CONNECTION

6.0

3X .88 2 PLCS

3X 1.75 2 PLCS

4X 1.00

4X 2.00 TYP .531 TYP

DETAIL CCUSTOMER BUS BAR

SCALE 1:4

6X NEMA 2 HOLE2 SIDED CONNECTION

CENTEROF GRAVITY

2 / 21:1294-9200-00000201DWG: OUTLINE, 1600A SS4Division/Dept. Title Document ID Scale Page

Power Protection

We reserve all rights in this docum

ent and in the information contained therein. R

eproduction, use or disclosure to third parties without express authority is strictly forbidden. ©

Copyright 2014 A

BB

.

A01Doc. Rev.